IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].
We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads).
More details of the usecase are explained in [2]. Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma. Today, it can only be done by mremap, however it forces
splitting the vma.
[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/
Update for the ioctl_userfaultfd(2) manpage:
UFFDIO_MOVE
(Since Linux xxx) Move a continuous memory chunk into the
userfault registered range and optionally wake up the blocked
thread. The source and destination addresses and the number of
bytes to move are specified by the src, dst, and len fields of
the uffdio_move structure pointed to by argp:
struct uffdio_move {
__u64 dst; /* Destination of move */
__u64 src; /* Source of move */
__u64 len; /* Number of bytes to move */
__u64 mode; /* Flags controlling behavior of move */
__s64 move; /* Number of bytes moved, or negated error */
};
The following value may be bitwise ORed in mode to change the
behavior of the UFFDIO_MOVE operation:
UFFDIO_MOVE_MODE_DONTWAKE
Do not wake up the thread that waits for page-fault
resolution
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
Allow holes in the source virtual range that is being moved.
When not specified, the holes will result in ENOENT error.
When specified, the holes will be accounted as successfully
moved memory. This is mostly useful to move hugepage aligned
virtual regions without knowing if there are transparent
hugepages in the regions or not, but preventing the risk of
having to split the hugepage during the operation.
The move field is used by the kernel to return the number of
bytes that was actually moved, or an error (a negated errno-
style value). If the value returned in move doesn't match the
value that was specified in len, the operation fails with the
error EAGAIN. The move field is output-only; it is not read by
the UFFDIO_MOVE operation.
The operation may fail for various reasons. Usually, remapping of
pages that are not exclusive to the given process fail; once KSM
might deduplicate pages or fork() COW-shares pages during fork()
with child processes, they are no longer exclusive. Further, the
kernel might only perform lightweight checks for detecting whether
the pages are exclusive, and return -EBUSY in case that check fails.
To make the operation more likely to succeed, KSM should be
disabled, fork() should be avoided or MADV_DONTFORK should be
configured for the source VMA before fork().
This ioctl(2) operation returns 0 on success. In this case, the
entire area was moved. On error, -1 is returned and errno is
set to indicate the error. Possible errors include:
EAGAIN The number of bytes moved (i.e., the value returned in
the move field) does not equal the value that was
specified in the len field.
EINVAL Either dst or len was not a multiple of the system page
size, or the range specified by src and len or dst and len
was invalid.
EINVAL An invalid bit was specified in the mode field.
ENOENT
The source virtual memory range has unmapped holes and
UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.
EEXIST
The destination virtual memory range is fully or partially
mapped.
EBUSY
The pages in the source virtual memory range are either
pinned or not exclusive to the process. The kernel might
only perform lightweight checks for detecting whether the
pages are exclusive. To make the operation more likely to
succeed, KSM should be disabled, fork() should be avoided
or MADV_DONTFORK should be configured for the source virtual
memory area before fork().
ENOMEM Allocating memory needed for the operation failed.
ESRCH
The target process has exited at the time of a UFFDIO_MOVE
operation.
Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the userfaultfd API to advertise this feature as part of feature
flags and supported ioctls (returned upon registration).
Add basic documentation describing the new feature.
Link: https://lkml.kernel.org/r/20230707215540.2324998-7-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one. This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.
This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features. Existing userfaultfd code supports
using WP and MINOR modes together (i.e. you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.
So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.
Update the selftest to do some very basic exercising of the new flag.
Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).
[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/
Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4.
The new feature bit makes anonymous memory acts the same as file memory on
userfaultfd-wp in that it'll also wr-protect none ptes.
It can be useful in two cases:
(1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot,
so pre-fault can be replaced by enabling this flag and speed up
protections
(2) It helps to implement async uffd-wp mode that Muhammad is working on [1]
It's debatable whether this is the most ideal solution because with the
new feature bit set, wr-protect none pte needs to pre-populate the
pgtables to the last level (PAGE_SIZE). But it seems fine so far to
service either purpose above, so we can leave optimizations for later.
The series brings pte markers to anonymous memory too. There's some
change in the common mm code path in the 1st patch, great to have some eye
looking at it, but hopefully they're still relatively straightforward.
This patch (of 2):
This is a new feature that controls how uffd-wp handles none ptes. When
it's set, the kernel will handle anonymous memory the same way as file
memory, by allowing the user to wr-protect unpopulated ptes.
File memories handles none ptes consistently by allowing wr-protecting of
none ptes because of the unawareness of page cache being exist or not.
For anonymous it was not as persistent because we used to assume that we
don't need protections on none ptes or known zero pages.
One use case of such a feature bit was VM live snapshot, where if without
wr-protecting empty ptes the snapshot can contain random rubbish in the
holes of the anonymous memory, which can cause misbehave of the guest when
the guest OS assumes the pages should be all zeros.
QEMU worked it around by pre-populate the section with reads to fill in
zero page entries before starting the whole snapshot process [1].
Recently there's another need raised on using userfaultfd wr-protect for
detecting dirty pages (to replace soft-dirty in some cases) [2]. In that
case if without being able to wr-protect none ptes by default, the dirty
info can get lost, since we cannot treat every none pte to be dirty (the
current design is identify a page dirty based on uffd-wp bit being
cleared).
In general, we want to be able to wr-protect empty ptes too even for
anonymous.
This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make
uffd-wp handling on none ptes being consistent no matter what the memory
type is underneath. It doesn't have any impact on file memories so far
because we already have pte markers taking care of that. So it only
affects anonymous.
The feature bit is by default off, so the old behavior will be maintained.
Sometimes it may be wanted because the wr-protect of none ptes will
contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte
markers to anonymous), but also on creating the pgtables to store the pte
markers. So there's potentially less chance of using thp on the first
fault for a none pmd or larger than a pmd.
The major implementation part is teaching the whole kernel to understand
pte markers even for anonymously mapped ranges, meanwhile allowing the
UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the
new feature bit is set.
Note that even if the patch subject starts with mm/uffd, there're a few
small refactors to major mm path of handling anonymous page faults. But
they should be straightforward.
With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all
the memory before wr-protect during taking a live snapshot. Quotting from
Muhammad's test result here [3] based on a simple program [4]:
(1) With huge page disabled
echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 1111453 (pre-fault 1101011)
Test MADVISE: 278276 (pre-fault 266378)
Test WP-UNPOPULATE: 11712
(2) With Huge page enabled
echo always > /sys/kernel/mm/transparent_hugepage/enabled
./uffd_wp_perf
Test DEFAULT: 4
Test PRE-READ: 22521 (pre-fault 22348)
Test MADVISE: 4909 (pre-fault 4743)
Test WP-UNPOPULATE: 14448
There'll be a great perf boost for no-thp case, while for thp enabled with
extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE,
but that's low possibility in reality, also the overhead was not reduced
but postponed until a follow up write on any huge zero thp, so potentially
it is faster by making the follow up writes slower.
[1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/
[2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/
[3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/
[4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c
[peterx@redhat.com: comment changes, oneliner fix to khugepaged]
Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n
Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is enough to use a file name to cross-reference another rst document.
Jon says:
The right things will happen in the HTML output, readers of the
plain-text will know immediately where to go, and we don't have to add
the label clutter.
Drop reference markup and unnecessary labels and use plain file names.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230201094156.991542-4-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Explain the different ways to create a new userfaultfd, and how access
control works for each way.
[axelrasmussen@google.com: improve wording in documentation, per Mike]
Link: https://lkml.kernel.org/r/20220819205201.658693-5-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220808175614.3885028-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the feature is fully implemented (the faulting path hooks exist
so userspace is notified, and the ioctl to resolve such faults is
available), advertise this as a supported feature.
Link: https://lkml.kernel.org/r/20210503180737.2487560-6-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reword / reorganize things a little bit into "lists", so new features /
modes / ioctls can sort of just be appended.
Describe how UFFDIO_REGISTER_MODE_MINOR and UFFDIO_CONTINUE can be used to
intercept and resolve minor faults. Make it clear that COPY and ZEROPAGE
are used for MISSING faults, whereas CONTINUE is used for MINOR faults.
Link: https://lkml.kernel.org/r/20210301222728.176417-6-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Adam Ruprecht <ruprecht@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Cannon Matthews <cannonmatthews@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shawn Anastasio <shawn@anastas.io>
Cc: Steven Price <steven.price@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several parts of this document define literals: ioctl names,
function calls, directory patches, etc. Mark those as literal
blocks, in order to improve its readability (both at text mode
and after parsed by Sphinx.
This fixes those two warnings:
Documentation/admin-guide/mm/userfaultfd.rst:139: WARNING: Inline emphasis start-string without end-string.
Documentation/admin-guide/mm/userfaultfd.rst:139: WARNING: Inline emphasis start-string without end-string.
produced during documentation build.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2ae061761baf8fe00cdf8a7e6dae293756849a05.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Several documents in Documentation/vm fit quite well into the "admin/user
guide" category. The documents that don't overload the reader with lots of
implementation details and provide coherent description of certain feature
can be moved to Documentation/admin-guide/mm.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Andrea Arcangeli
Peter Xu
Axel Rasmussen
Mike Rapoport (IBM)
Andrew Klychkov
Michel Lespinasse
Mauro Carvalho Chehab
Martin Cracauer
Mike Rapoport