IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
i915_request contains direct alias to i915, there is no point to go via
rq->engine->i915.
v2: added missing rq.i915 initialization in measure_breadcrumb_dw.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720113002.1541572-1-andrzej.hajda@intel.com
For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.
v2: Use OA_BUFFER_SIZE (Ashutosh)
Fixes: 09a36015d9a0 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
On DG2, capturing OA reports while running heavy render workloads
sometimes results in invalid OA reports where 64-byte chunks inside
reports have stale values. Under memory pressure, high OA sampling rates
(13.3 us) and heavy render workload, occasionally, the OA HW TAIL
pointer does not progress as fast as the sampling rate. When these
glitches occur, the TAIL pointer takes approx. 200us to progress. While
this is expected behavior from the HW perspective, invalid reports are
not expected.
In oa_buffer_check_unlocked(), when we execute the if condition, we are
updating the oa_buffer.tail to the aging tail and then setting pollin
based on this tail value, however, we do not have a chance to rewind and
validate the reports prior to setting pollin. The validation happens
in a subsequent call to oa_buffer_check_unlocked(). If a read occurs
before this validation, then we end up reading reports up until this
oa_buffer.tail value which includes invalid reports. Though found on
DG2, this affects all platforms.
The aging tail logic is no longer necessary since we are explicitly
checking for landed reports.
Start by dropping the aging tail logic.
v2:
- Drop extra blank line
- Add reason to drop aging logic (Ashutosh)
- Add bug links (Ashutosh)
- rename aged_tail to read_tail
- Squash patches 3 and 1
v3: (Ashutosh)
- Remove extra spaces
- Remove gtt_offset from the pollin calculation
- s/Bug:/Link/ in commit message (checkpatch)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7484
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7757
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230605193923.1836048-2-umesh.nerlige.ramappa@intel.com
Clearing out report id and timestamp as means to detect unlanded reports
only works if report size is power of 2. That is, only when report size is
a sub-multiple of the OA buffer size can we be certain that reports will
land at the same place each time in the OA buffer (after rewind). If report
size is not a power of 2, we need to zero out the entire report to be able
to detect unlanded reports reliably.
v2: Add Fixes tag (Umesh)
Fixes: 1cc064dce4ed ("drm/i915/perf: Add support for OA media units")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523204042.4180641-1-ashutosh.dixit@intel.com
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com
[tursulin: Manually added stable tag.]
OAM does not work with media C6 enabled on some steppings of MTL.
Disable OAM if we detect that media C6 was enabled in bios.
v2: (Ashutosh)
- Remove drm_notice from the driver load path
- Log a drm_err when opening an OAM stream on affected steppings
v3:
- Initialize the engine group even if mc6 is enabled (Ashutosh)
- Checkpatch fix
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-12-umesh.nerlige.ramappa@intel.com
Some of the newer OA formats are not powers of 2. For those formats,
adjust the hw_tail accordingly when checking for new reports.
v2: (Ashutosh)
- Switch to OA_TAKEN for diff calculation
- Use OA_BUFFER_SIZE instead of the vma size
- Update comments
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-8-umesh.nerlige.ramappa@intel.com
Now that OA formats come in flavor of 64 bit reports, the report header
has 64 bit report-id, timestamp, context-id and gpu-ticks fields. When
filtering these reports, use the right width for these fields.
Note that upper dword of context id is reserved, so squash lower dword
only.
v2: (Ashutosh)
- Drop inline
- Update comment with dword definitions - report id and timestamp
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-7-umesh.nerlige.ramappa@intel.com
Now that we may have multiple OA units in a single GT as well as on
separate GTs, create an engine group that maps to a single OA unit.
v2: (Jani)
- Drop warning on ENOMEM
- Reorder patch in the series
v3: (Ashutosh)
- Remove unused members from perf structs
- Update comments
- Update engine_supports_oa check
- Just return 1 in num_perf_groups_per_gt for now
- Set engine->oa_group to NULL to begin with
v4: Use engine_supports_oa() check in oa_init_reg_state (Ashutosh)
v5: Rebase after dropping engine_supports_oa helper
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-5-umesh.nerlige.ramappa@intel.com
Once OA supports media engine class:instance, the engine can only be
validated outside the switch since class and instance parameters are
separate entities. Since OA sseu config depends on engine
class:instance, validate OA sseu config outside the switch.
v2: (Ashutosh)
- Clarify commit message
- Use drm_dbg instead of DRM_DEBUG
- Reorder stack variables
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-4-umesh.nerlige.ramappa@intel.com
If we fail to adjust the GuC run-control on opening the perf stream,
make sure we unwind the wakeref just taken.
v2: Retain old goto label names (Ashutosh)
v3: Drop bitfield boolean
Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com
Sync after v6.2-rc1 landed in drm-next.
We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.
References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
0x20cc (WAIT_FOR_RC6_EXIT on other platforms) is repurposed on MTL. Use
a separate mux table to verify oa configs passed by user.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212220902.1819159-4-umesh.nerlige.ramappa@intel.com
Similar to ACM, OA timestamp that is part of the OA report is shifted
when compared to the CS timestamp. Add MTL to the WA.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212220902.1819159-3-umesh.nerlige.ramappa@intel.com
On MTL, gt->scratch was using stolen lmem. An MI_SRM to stolen lmem
caused a hang that was attributed to saving and restoring the GPR
registers used for noa_wait.
Add an additional page in noa_wait BO to save/restore GPR registers for
the noa_wait logic.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212220902.1819159-2-umesh.nerlige.ramappa@intel.com
An earlier commit introduced a mechanism to parse the context image to
find the OA context control offset. This resulted in an NPD on haswell
when gem_context was passed into i915_perf_open_ioctl params. Haswell
does not support logical ring contexts, so ensure that the context image
is parsed only for platforms with logical ring contexts and also
validate lrc_reg_state.
v2: Fix build failure
v3: Fix checkpatch error
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7432
Fixes: a5c3a3cbf029 ("drm/i915/perf: Determine gen12 oa ctx offset at runtime")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123235342.713068-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 95c713d722017b26e301303713d638e0b95b1f68)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
An earlier commit introduced a mechanism to parse the context image to
find the OA context control offset. This resulted in an NPD on haswell
when gem_context was passed into i915_perf_open_ioctl params. Haswell
does not support logical ring contexts, so ensure that the context image
is parsed only for platforms with logical ring contexts and also
validate lrc_reg_state.
v2: Fix build failure
v3: Fix checkpatch error
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7432
Fixes: a5c3a3cbf029 ("drm/i915/perf: Determine gen12 oa ctx offset at runtime")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123235342.713068-1-umesh.nerlige.ramappa@intel.com
We already wrap i915_vma.node.start for use with the GGTT, as there we
can perform additional sanity checks that the node belongs to the GGTT
and fits within the 32b registers. In the next couple of patches, we
will introduce guard pages around the objects _inside_ the drm_mm_node
allocation. That is we will offset the vma->pages so that the first page
is at drm_mm_node.start + vma->guard (not 0 as is currently the case).
All users must then not use i915_vma.node.start directly, but compute
the guard offset, thus all users are converted to use a
i915_vma_offset() wrapper.
The notable exceptions are the selftests that are testing exact
behaviour of i915_vma_pin/i915_vma_insert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130235805.221010-3-andi.shyti@linux.intel.com
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmN3+28ACgkQ+mJfZA7r
E8rGZQf9HiTNW1yM1/YGq7ezD6/XN2sbCaH/iVNd0+FHxz4HHaTJaEVQ1xEBTdIb
poMQiWl64ig3t2LuDrRGwlsVmFYV3vK5byt758sMpLb/M3cWbbB2swsW4YTbORM6
qcatv9eYyuoiylwj6fVLFPMXpwNTyCdbngbLZt+tTcl1oxaZYp0PVXBkzlKFP02U
KL4p+Dv4OHSjP38beIzUaHz3IJJAik/ttsxa1JhhC8F9UUJs7kuo6GXMY1OzRNpc
jKj3+F0OtDRA2xaw7YpbLI8yt+pWzerqFsnZDAvvx8Js7SQLkyNtjkuHusp8OP77
x99MlyOfbSfBnkbdm4Rhm7IIPTiUnw==
=SHn9
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2022-11-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i915_vma_move_to_active by default and add flag allowing bypassing it.
Adjust all callers accordingly.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019215906.295296-2-andrzej.hajda@intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
Convert some usages of legacy DRM logging macros into versions which tell
us on which device have the events occurred.
v2:
* Don't have struct drm_device as local. (Jani, Ville)
v3:
* Store gt, not i915, in workaround list. (John)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109104633.2579245-1-tvrtko.ursulin@linux.intel.com
We have an additional register to select which slices contribute to
OAG/OAG counter increments.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-16-umesh.nerlige.ramappa@intel.com
On DG2, a w/a resets RCS/CCS before it goes into RC6. This breaks OA
since OA does not expect engine resets during its use. Fix it by
disabling RC6.
v2: (Ashutosh)
- Bring back slpc_unset_param helper
- Update commit msg
- Use with_intel_runtime_pm helper for set/unset
v3: (Ashutosh)
- Just use intel_uc_uses_guc_rc
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-15-umesh.nerlige.ramappa@intel.com
OA reports in the OA buffer contain an OA timestamp field that helps
user calculate delta between 2 OA reports. The calculation relies on the
CS timestamp frequency to convert the timestamp value to nanoseconds.
The CS timestamp frequency is a function of the CTC_SHIFT value in
RPM_CONFIG0.
In DG2, OA unit assumes that the CTC_SHIFT is 3, instead of using the
actual value from RPM_CONFIG0. At the user level, this results in an
error in calculating delta between 2 OA reports since the OA timestamp
is not shifted in the same manner as CS timestamp. Also the periodicity
of the reports is different from what the user configured because of
mismatch in the CS and OA frequencies.
The issue also affects MI_REPORT_PERF_COUNT command.
To resolve this, return actual OA timestamp frequency to the user in
i915_getparam_ioctl, so that user can calculate the right OA exponent as
well as interpret the reports correctly.
MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18893
v2:
- Use REG_FIELD_GET (Ashutosh)
- Update commit msg
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-13-umesh.nerlige.ramappa@intel.com
Disable Clock gating in EU when gathering the events so that EU events
are not lost.
v2: Fix checkpatch issues
v3: User MCR helpers to write to MC reg
v4: Indent correctly (checkpatch)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-12-umesh.nerlige.ramappa@intel.com
DG2 introduces OA reports with 64 bit report header fields. Perf OA
would need more information about the OA format in order to process such
reports. Store all OA format info in oa_buffer instead of just the size
and format-id.
v2: Drop format_size variable (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-11-umesh.nerlige.ramappa@intel.com
User passes uabi engine class and instance to the perf OA interface. Use
gt corresponding to the engine to pin the buffers to the right ggtt.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-10-umesh.nerlige.ramappa@intel.com
With multi-gt, user can access multiple OA buffers concurrently. Use
stream->lock instead of gt->perf.lock to serialize file operations.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-9-umesh.nerlige.ramappa@intel.com
Make perf part of gt as the OAG buffer is specific to a gt. The refactor
eventually simplifies programming the right OA buffer and the right HW
registers when supporting multiple gts.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-8-umesh.nerlige.ramappa@intel.com
Earlier code used exclusive_stream to check for user passed context.
Simplify this by accessing stream->ctx.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-7-umesh.nerlige.ramappa@intel.com
XEHPSDV and DG2 provide a way to configure bytes per clock vs commands
per clock reporting. Enable bytes per clock setting on enabling OA.
Bspec: 51762
Bspec: 52201
v2:
- Fix commit msg (Ashutosh)
- Fix checkpatch issues
v3:
- s/commands/bytes/ in code comment and commmit msg
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-6-umesh.nerlige.ramappa@intel.com
Some SKUs of same gen12 platform may have different oactxctrl
offsets. For gen12, determine oactxctrl offsets at runtime.
v2: (Lionel)
- Move MI definitions to intel_gpu_commands.h
- Ensure __find_reg_in_lri does read past context image size
v3: (Ashutosh)
- Drop unnecessary use of double underscores
- fix find_reg_in_lri
- Return error if oa context offset is U32_MAX
- Error out if oa_ctx_ctrl_offset does not find offset
v4: (Ashutosh)
- Warn on odd MI LRI_LEN
- Remove unnecessary check for valid_oactxctrl_offset
- Drop valid_oactxctrl_offset macro
v5: Drop unrelated comment
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-5-umesh.nerlige.ramappa@intel.com
Predication for batch buffer commands changed in XEHPSDV.
MI_BATCH_BUFFER_START predicates based on MI_SET_PREDICATE_RESULT
register. The MI_SET_PREDICATE_RESULT register can only be modified
with MI_SET_PREDICATE command. When configured, the MI_SET_PREDICATE
command sets MI_SET_PREDICATE_RESULT based on bit 0 of
MI_PREDICATE_RESULT_2. Use this to configure predication in noa_wait.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-4-umesh.nerlige.ramappa@intel.com
With GuC mode of submission, GuC is in control of defining the context
id field that is part of the OA reports. To filter reports, UMD and KMD
must know what sw context id was chosen by GuC. There is not interface
between KMD and GuC to determine this, so read the upper-dword of
EXECLIST_STATUS to filter/squash OA reports for the specific context.
v2: Explain guc id stealing w.r.t OA use case
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026222102.5526-2-umesh.nerlige.ramappa@intel.com
The assignment to variable taken is redundant and so it can be
removed as well as the variable too.
Cleans up clang-scan build warnings:
warning: Although the value stored to 'taken' is used in the enclosing
expression, the value is never actually read from 'taken'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007195345.2749911-1-colin.i.king@gmail.com
The global sseu config is applicable only to gen11 platforms where
concurrent media, render and OA use cases may cause some subslices to be
turned off and hence lose NOA configuration. Ideally we want to return
ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so
disable only for gfx12.50+.
v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel)
v3: (Matt)
- Update commit message and replace "12.5" with "12.50"
- Replace DRM_DEBUG() with driver specific drm_dbg()
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-2-umesh.nerlige.ramappa@intel.com
DRM_DEBUG is not the right debug call to use in i915 OA, replace it with
driver specific drm_dbg() call (Matt).
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-1-umesh.nerlige.ramappa@intel.com
