IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The secondary mux parent order is swapped.
This currently doesn't cause problems as the secondary mux is used for idle
clk and as a safe clk source while reprogramming the hfpll.
Each mux have 2 or more output but he always have a safe source to
switch while reprogramming the connected pll. We use a clk notifier to
switch to the correct parent before clk core can apply the correct rate.
The parent to switch is hardcoded in the mux struct.
For the secondary mux the safe source to use is the qsb parent as it's
the only fixed clk as the acpus_aux is a pll that can source from pxo or
from pll8.
The hardcoded safe parent for the secondary mux is set to index 0 that
in the secondary mux map is set to 2.
But the index 0 is actually acpu_aux in the parent list.
Fix the swapped parents to correctly handle idle frequency and output a
sane clk_summary report.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-1-ansuelsmth@gmail.com
Use devm variant for clk notifier register and correctly handle free
resource on driver remove.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com
Currently div2 value is applied to the wrong bits. This is caused by a
bug in the code where the shift is done only for lpl, for anything
else the mask is not shifted to the correct bits.
Fix this by correctly shift if lpl is not supported.
Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com
krait-cc use this driver for the secondary mux. Register it as a clk
provider to correctly use this clk in other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com
Downstream QCA 5.4 kernel defines networking resets which are not present
in the mainline kernel but are required for the networking drivers.
So, port the downstream resets and avoid using magic values for mask,
construct mask for resets which require multiple bits to be set/cleared.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com
This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.
Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.
So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
The two devices managed by lpasscorecc-sc7180.c each had their own
"struct dev_pm_ops". This is not needed. They are exactly the same and
the structure is "static const" so it can't possible change. combine
the two. This matches what's done for sc7280.
This should be a noop other than saving a few bytes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.3.I90ba14a47683a484f26531a08f7b46ace7f0a8a9@changeid
The sc7180 lpass clock controller's pm_runtime usage wasn't broken
quite as spectacularly as the sc7280's pm_runtime usage, but it was
still broken. Putting some printouts in at boot showed me this (with
serial console enabled, which makes the prints slow and thus changes
timing):
[ 3.109951] DOUG: my_pm_clk_resume, usage=1
[ 3.114767] DOUG: my_pm_clk_resume, usage=1
[ 3.664443] DOUG: my_pm_clk_suspend, usage=0
[ 3.897566] DOUG: my_pm_clk_suspend, usage=0
[ 3.910137] DOUG: my_pm_clk_resume, usage=1
[ 3.923217] DOUG: my_pm_clk_resume, usage=0
[ 4.440116] DOUG: my_pm_clk_suspend, usage=-1
[ 4.444982] DOUG: my_pm_clk_suspend, usage=0
[ 14.170501] DOUG: my_pm_clk_resume, usage=1
[ 14.176245] DOUG: my_pm_clk_resume, usage=0
...or this w/out serial console:
[ 0.556139] DOUG: my_pm_clk_resume, usage=1
[ 0.556279] DOUG: my_pm_clk_resume, usage=1
[ 1.058422] DOUG: my_pm_clk_suspend, usage=-1
[ 1.058464] DOUG: my_pm_clk_suspend, usage=0
[ 1.186250] DOUG: my_pm_clk_resume, usage=1
[ 1.186292] DOUG: my_pm_clk_resume, usage=0
[ 1.731536] DOUG: my_pm_clk_suspend, usage=-1
[ 1.731557] DOUG: my_pm_clk_suspend, usage=0
[ 10.288910] DOUG: my_pm_clk_resume, usage=1
[ 10.289496] DOUG: my_pm_clk_resume, usage=0
It seems to be doing roughly the right sequence of calls, but just
like with sc7280 this is more by luck than anything. Having a usage of
-1 is just not OK.
Let's fix this like we did with sc7280.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: ce8c195e652f ("clk: qcom: lpasscc: Introduce pm autosuspend for SC7180")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.2.I49b25b9bda9430fc7ea21e5a708ca5a0aced2798@changeid
The pm_runtime usage in lpass-sc7280 was broken in quite a few
ways. Specifically:
1. At the end of probe it called "put" twice. This is a no-no and will
end us up with a negative usage count. Even worse than calling
"put" twice, it never called "get" once. Thus after bootup it could
be seen that the runtime usage of the devices managed by this
driver was -2.
2. In some error cases it manually called pm_runtime_disable() even
though it had previously used devm_add_action_or_reset() to set
this up to be called automatically. This meant that in these error
cases we'd double-call pm_runtime_disable().
3. It forgot to call undo pm_runtime_use_autosuspend(), which can
sometimes have subtle problems (and the docs specifically mention
that you need to undo this function).
Overall the above seriously calls into question how this driver is
working. It seems like a combination of "it doesn't", "by luck", and
"because of the weirdness of runtime_pm". Specifically I put a
printout to the serial console every time the runtime suspend/resume
was called for the two devices created by this driver (I wrapped the
pm_clk calls). When I had serial console enabled, I found that the
calls got resumed at bootup (when the clk core probed and before our
double-put) and then never touched again. That's no good.
[ 0.829997] DOUG: my_pm_clk_resume, usage=1
[ 0.835487] DOUG: my_pm_clk_resume, usage=1
When I disabled serial console (speeding up boot), I got a different
pattern, which I guess (?) is better:
[ 0.089767] DOUG: my_pm_clk_resume, usage=1
[ 0.090507] DOUG: my_pm_clk_resume, usage=1
[ 0.151885] DOUG: my_pm_clk_suspend, usage=-2
[ 0.151914] DOUG: my_pm_clk_suspend, usage=-2
[ 1.825747] DOUG: my_pm_clk_resume, usage=-1
[ 1.825774] DOUG: my_pm_clk_resume, usage=-1
[ 1.888269] DOUG: my_pm_clk_suspend, usage=-2
[ 1.888282] DOUG: my_pm_clk_suspend, usage=-2
These different patterns have to do with the fact that the core PM
Runtime code really isn't designed to be robust to negative usage
counts and sometimes may happen to stumble upon a behavior that
happens to "work". For instance, you can see that
__pm_runtime_suspend() will treat any non-zero value (including
negative numbers) as if the device is in use.
In any case, let's fix the driver to be correct. We'll hold a
pm_runtime reference for the whole probe and then drop it (once!) at
the end. We'll get rid of manual pm_runtime_disable() calls in the
error handling. We'll also switch to devm_pm_runtime_enable(), which
magically handles undoing pm_runtime_use_autosuspend() as of commit
b4060db9251f ("PM: runtime: Have devm_pm_runtime_enable() handle
pm_runtime_dont_use_autosuspend()").
While we're at this, let's also use devm_pm_clk_create() instead of
rolling it ourselves.
Note that the above changes make it obvious that
lpassaudio_create_pm_clks() was doing more than just creating
clocks. It was also setting up pm_runtime parameters. Let's rename it.
All of these problems were found by code inspection. I started looking
at this driver because it was involved in a deadlock that I reported a
while ago [1]. Though I bisected the deadlock to commit 1b771839de05
("clk: qcom: gdsc: enable optional power domain support"), it was
never really clear why that patch affected it other than a luck of
timing changes. I'll also note that by fixing the timing (as done in
this change) we also seem to aboid the deadlock, which is a nice
benefit.
Also note that some of the fixes here are much the same type of stuff
that Dmitry did in commit 72cfc73f4663 ("clk: qcom: use
devm_pm_runtime_enable and devm_pm_clk_create"), but I guess
lpassaudiocc-sc7280.c didn't exist then.
[1] https://lore.kernel.org/r/20220922154354.2486595-1-dianders@chromium.org
Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.1.I00a0e4564a25489e85328ec41636497775627564@changeid
@pll->rate_table has allocated memory by kmemdup(), if clk_hw_register()
fails, it should be freed, otherwise it will cause memory leak issue,
this patch fixes it.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122152353.204132-1-xiujianfeng@huawei.com
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It seems like CLK_INFRA_ADC_FRC_CK always need to be enabled for
CLK_INFRA_ADC_26M_CK to work. Instead of adding this dependency to the
mtk-thermal and mt6577_auxadc drivers, add dependency to the clock
driver clk-mt7986-infracfg.c.
Fixes: ec97d23c8e22 ("clk: mediatek: add mt7986 clock support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/5e55012567da74870e1fb2edc2dc513b5821e523.1666801017.git.daniel@makrotopia.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Use mtk_clk_register_pllfhs() to enhance frequency hopping and
spread spectrum clocking control for MT8186.
Co-developed-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221121122957.21611-5-johnson.wang@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
To implement frequency hopping and spread spectrum clocking
function, we introduce new clock type and APIs to handle
FHCTL hardware.
Co-developed-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221121122957.21611-4-johnson.wang@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Export PLL operations and register functions for different type
of clock driver used.
Co-developed-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221121122957.21611-2-johnson.wang@mediatek.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Following the changes done to MT8183, MT8192, MT8195, register a
clock notifier for MT8186, allowing safe clockrate updates for the
MFG PLL.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Propagate the rate changes to MFG_BG3D's parent on MT8186 to allow
for proper GPU DVFS.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The main/univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have (a lot of) "fixed factor"
main/univpll divider clocks, used by MUX clocks to provide different
rates based on PLL output dividers.
Following what was done on clk-mt8186-topckgen and also preventing the
same GPU DVFS issue, drop CLK_SET_RATE_PARENT from the aforementioned
clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The main/univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have (a lot of) "fixed factor"
main/univpll divider clocks, used by MUX clocks to provide different
rates based on PLL output dividers.
Following what was done on clk-mt8186-topckgen and also preventing the
same GPU DVFS issue, drop CLK_SET_RATE_PARENT from the aforementioned
clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The main/sys/univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have (a lot of) "fixed factor"
main/sys/univpll divider clocks, used by MUX clocks to provide
different rates based on PLL output dividers.
Following what was done on clk-mt8186-topckgen and also preventing the
same GPU DVFS issue, drop CLK_SET_RATE_PARENT from the aforementioned
clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The main/sys/univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have (a lot of) "fixed factor"
main/sys/univpll divider clocks, used by MUX clocks to provide
different rates based on PLL output dividers.
Following what was done on clk-mt8186-topckgen and also preventing the
same GPU DVFS issue, drop CLK_SET_RATE_PARENT from the aforementioned
clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The syspll and univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have (a lot of) "fixed factor"
sys/univpll divider clocks, used by MUX clocks to provide different
rates based on PLL output dividers.
Following what was done on clk-mt8186-topckgen and also solving the
same GPU DVFS issue, drop CLK_SET_RATE_PARENT from the aforementioned
clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
There's no need to split each FACTOR entry in two lines, as each of
them does fit in one line just fine.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The mainpll and univpll clocks are used as clock sources for multiple
peripherals of different kind, some of which are critical (like AXIs);
a rate change on any of these two will produce a rate change on many
devices and that's likely to produce system instability if not done
correctly: this is the reason why we have "fixed factor" clocks, used
by MUX clocks to provide different rates based on PLL output dividers.
Though, there's one fundamental issue that must be resolved somehow:
When performing GPU DVFS, we get a rate request that will try to change
the frequency of MAINPLL due to the CLK_TOP_MFG mux having clk26m,
mfgpll (the GPU dedicated PLL), mainpll_d3, mainpll_d5 (fixed factor
dividers) as possible parents.
In order to solve that, there are two ways:
1. Add new "fake" mainpll_d3_fixed, mainpll_d5_fixed clocks, clones
of mainpll_d3, mainpll_d5 clocks, for the only purpose of not
declaring CLK_SET_RATE_PARENT; or
2. Simply drop said flag from the original dividers.
After some careful validation, I cannot see anything calling a rate
change request during runtime for MAINPLL, nor for UNIVPLL (which would,
again, mean that we're reclocking lots of peripherals at once!), so it
is safe *and sane* to simply remove the CLK_SET_RATE_PARENT flag to all
of the main/univpll fixed factor divider clocks.
Besides, if for any (doubtful) reason main/univpll rate change will be
required in the future, it's still possible to call that on the PLL main
clocks, so we're still covered anyway.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Before this change, every mtk_fixed_factor clock forced clock flags to
CLK_SET_RATE_PARENT: while this is harmless in some cases, it may not
be desired in some others, especially when performing clock muxing on
a clock having multiple parents of which one is a dedicated PLL and the
others are not.
This is especially seen on the GPU clocks on some SoCs, where we are
muxing between multiple parents: a fixed clock (crystal), a programmable
GPU PLL and one or more dividers for the MAINPLL, used for a number of
devices; it happens that when a rate change is called for the GPU, the
clock framework will try to satisfy the rate request by using one of the
MAINPLL dividers, which have CLK_SET_RATE_PARENT and will set the rate
on MAINPLL itself - overclocking or underclocking many devices in the
system - and making it to lock up.
Logically, it should be harmless (and would only reduce possible bugs)
to change all of the univpll and mainpll related fixed factor clocks
to not declare the CLK_SET_RATE_PARENT by default but, on some SoCs,
this is also used for dividers of other PLLs for which a rate change
based on the divider may be desired, hence introduce a new FACTOR_FLAGS()
macro to use custom flags (or none) on selected fixed factor clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20221024102307.33722-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The imx_obtain_fixed_clk_hw name was wrong and misleading. Renaming it
to imx_get_clk_hw_by_name clarifies the purpose of the function, and
will allow it to be used not only for fixed rate clocks but also in
wider contexts.
No functional changes intended.
The replacements were made with the following command:
grep -rl 'imx_obtain_fixed_clk_hw' ./ | \
xargs sed -i 's/imx_obtain_fixed_clk_hw/imx_get_clk_hw_by_name/g'
Tested on a BSH SystemMaster (SMM) S2 board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221113180839.1625832-1-dario.binacchi@amarulasolutions.com
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.
Tested on the BSH SystemMaster (SMM) S2 board.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Because of the possible failure of devm_kzalloc(), name might be NULL and
will cause null pointer dereference later.
Therefore, it might be better to check it and directly return -ENOMEM.
Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
[claudiu.beznea: s/refrence/reference/, s/possilble/possible]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221119054858.178629-1-tanghui20@huawei.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Backmerge tag 'v6.1-rc6' into drm-next
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The three UFS reference clocks, gcc_ufs_ref_clkref_clk for external
UFS devices, gcc_ufs_card_clkref_clk and gcc_ufs_1_card_clkref_clk for
two PHYs are all sourced from CXO.
Added parent_data for all three reference clocks described above to
reflect that all three clocks are sourced from CXO to have valid
frequency for the ref clock needed by UFS controller driver.
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Link: https://lore.kernel.org/lkml/Y2Tber39cHuOSR%2FW@hovoldconsulting.com/
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20221115152956.21677-1-quic_shazhuss@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For the better maintenance regroup inclusions as follows:
- split CCF related headers in its own group
- order groups from generic to particular
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221122130732.48537-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is no SPEAr600 device named "ssp-pl022.x". Instead, the description
of the SSP (Synchronous Serial Port) was recently added to the Device Tree,
and the device name is "xxx.spi", so we should associate the SSP gateable
clock to these device names.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20221115135814.214388-3-kory.maincent@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is no SPEAr600 device named "clcd". Instead, the description of the
CLCD (color liquid crystal display controller) name is "fc200000.clcd", so
we should associate the CLCD gateable clock to this device name.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20221115135814.214388-2-kory.maincent@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The `parent_names' variable was freed also in case of kzalloc() error.
Instead of modifying the code to perform a proper memory release, I
decided to fix the bug by not allocating memory.
Since only one parent name is referenced, it is not necessary to
allocate this variable at runtime and therefore you can avoid calling
the kzalloc() function. This simplifies the code (even calls to kfree
can be removed) and improves the performance of the routine.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221113181147.1626585-2-dario.binacchi@amarulasolutions.com
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ti_clk_register() and ti_clk_register_omap_hw() functions are always
called with the parameter of type "struct device" set to NULL, since the
functions from which they are called always have a parameter of type
"struct device_node". Replacing "struct device" type parameter with
"struct device_node" will allow you to register a TI clock to the common
clock framework by taking advantage of the facilities provided by the
"struct device_node" type. Further, adding the "of_" prefix to the name
of these functions explicitly binds them to the "struct device_node"
type.
The patch has been tested on a Beaglebone board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221113181147.1626585-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It contains fixes for AT91 SoCs as follows:
- fix the clock ID for USB device port on RM9200 SoCs; along with it the
device tree references to this clocks were fixed in this patch to ease the
backporting and to avoid USB driver probe failure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY3eAPAAKCRCejrg/N2X7
/V1SAP9Rea8/sqyEUYCI9t8EdG70hSHNGCV2tC+0FvozGe7tnQD9Ew+04JCBnGfk
YejYowKjiVdXiAIyEyt7UgxRAX6cVQ4=
=24dW
-----END PGP SIGNATURE-----
Merge tag 'clk-microchip-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes
Pull Microchip clk driver fixes from Claudiu Beznea:
- fix the clock ID for USB device port on AT91 RM9200 SoCs; along with it the
device tree references to this clocks were fixed in this patch to ease the
backporting and to avoid USB driver probe failure.
* tag 'clk-microchip-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: rm9200: fix usb device clock id
1. Fix calling of_device_get_match_data() on wrong device (parent's) in
Exynos clock out driver.
2. Correct clock name in bindings of ExynosAutov9 clocks.
3. Correct parents of div4 clock on Exynos7885.
-----BEGIN PGP SIGNATURE-----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=ObqP
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes
Pull Samsung SoC clk driver fixes from Krzysztof Kozlowski:
- Fix calling of_device_get_match_data() on wrong device (parent's) in
Exynos clock out driver
- Correct clock name in bindings of ExynosAutov9 clocks
- Correct parents of div4 clock on Exynos7885
* tag 'samsung-clk-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"
dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1
clk: samsung: exynos7885: Correct "div4" clock parents
According to the RM, the CCGR101 is shared for the following root clocks:
- AUDIO_AHB_CLK_ROOT
- AUDIO_AXI_CLK_ROOT
- SAI1_CLK_ROOT
- SAI2_CLK_ROOT
- SAI3_CLK_ROOT
- SAI5_CLK_ROOT
- SAI6_CLK_ROOT
- SAI7_CLK_ROOT
- PDM_CLK_ROOT
IMX8MP_CLK_AUDIO_ROOT is same as AUDIO_AHB_CLK_ROOT
which can avoid break any users.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1667811007-19222-3-git-send-email-shengjiu.wang@nxp.com
The PLL146x is used to implement SYS_PLL3 on i.MX8MP and can be used
to drive UARTn_ROOT clock. By setting the PLL3 to 320 MHz or 640 MHz,
the PLL3 output can be divided down to supply UARTn_ROOT clock with
precise 64 MHz, which divided down further by 16x oversampling factor
used by the i.MX UART core yields 4 Mbdps baud base for the UART IP.
This is useful e.g. for BCM bluetooth chips, which can operate up to
4 Mbdps.
Add 320 MHz and 640 MHz entries so the PLL can be configured accordingly.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221031204838.195292-1-marex@denx.de
Keep sys ctr clock always on to make sure its register
can be accessed for cpuidle.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221028095211.2598312-7-peng.fan@oss.nxp.com
