IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Make sure that the DSP has no DMA channels allocated once the firmware
is downloaded, and that the default audio streams in use by the DSP are
setup in the correct order.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions for both reading and writing to the 8051's exram. Also,
add a little bit of documentation on how the addresses are segmented.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-4-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reset the codec upon initialization to clear out anything that may have
been setup on a previous boot into Windows, or in case of an improper
shutdown.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.
Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.
This change only affects Intel display audio codecs.
BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Windows driver sets the pincfg for the AE-5's rear-headphone to
report as a microphone. This causes issues with Pulseaudio mistakenly
believing there is no headphone plugged in. In Linux, we should instead
set it to be a headphone.
Fixes: a6b0961b39896 ("ALSA: hda/ca0132 - fix AE-5 pincfg")
Cc: <stable@kernel.org>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201208195223.424753-1-conmanx360@gmail.com
Link: https://lore.kernel.org/r/20201210173550.2968-1-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that the HD-audio clear and reconfig sysfs don't work any
longer after the recent driver core change. There are multiple issues
around that: the linked list corruption and the dead device handling.
The former issue is fixed by another patch for the driver core itself,
while the latter patch needs to be addressed in HD-audio side.
This patch corresponds to the latter, it recovers those broken
functions by replacing the device detach and attach actions with the
standard core API functions, which are almost equivalent with unbind
and bind actions.
Fixes: 654888327e9f ("driver core: Avoid binding drivers to dead devices")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207
Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Document the missing properties which are currently required for
Tegra186/Tegra194 DT files.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1607006202-4078-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Users reported that some Lenovo AMD platforms do not have ACP microphone,
but the BIOS advertises it via ACPI.
This patch create a simple DMI table, where those machines with the broken
BIOS can be added. The DMI description for Lenovo IdeaPad 5 and
IdeaPad Flex 5 devices are added there.
Also describe the dmic_acpi_check kernel module parameter in a more
understandable way.
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208171200.2737620-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).
int dpcm_be_dai_trigger(...)
{
for_each_dpcm_be(fe, stream, dpcm) {
(B) ...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_RESUME:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_STOP:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_SUSPEND:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
...
(1) ret = dpcm_do_trigger(...);
...
}
}
}
But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.
static int dpcm_do_trigger(...)
{
int ret;
(A) dev_dbg(...);
ret = soc_pcm_trigger(substream, cmd);
if (ret < 0)
(C) dev_err(...);
return ret;
}
This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These error paths return success but they should return -EINVAL.
Fixes: 97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset
microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To help in debugging issues with DisplayPort Multi-Stream Transport (aka
DP-MST) support, print information of active connections for each device
of a display audio pin widget.
Example output with the patch with two monitors connected to a DP-MST hub:
Devices: 4
Dev 00: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Dev 01: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
*Dev 02: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03 0x05* 0x07 0x09 ]
Dev 03: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Connection: 4
0x03 0x05* 0x07 0x09
Format of existing "Connection:" entry is left intact to keep
compatibility.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201208185736.2877541-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.
Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.
I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.
These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.
Regards,
Hans
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes: bb24a31ed584 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!
Fix it by renaming the secondary streams to unique names.
Fixes: a497a4363706 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Imx-hdmi is a new added machine driver for supporting hdmi devices
on i.MX platforms. There is HDMI IP or external HDMI modules connect
with SAI or AUD2HTX interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1607251319-5821-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.
Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.
When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.
Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.
The new sequence would be:
soc_pcm_prepare()
-> SND_SOC_DAPM_STREAM_START
soc_pcm_hw_free()
-> soc_pcm_hw_free()
-> SND_SOC_DAPM_STREAM_STOP
dpcm_fe_dai_shutdown()
-> SND_SOC_DAPM_STREAM_STOP
Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.
Fixes: a27b421f1d04 ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop X430UN with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207072755.16210-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change could fix 2 issues on this machine:
- the bass speaker's output volume can't be adjusted, that is because
the bass speaker is routed to the DAC (Nid 0x6) which has no volume
control.
- after plugging a headset with vol+, vol- and pause buttons on it,
press those buttons, nothing happens, this means those buttons
don't work at all. This machine has alc287 codec, need to add the
codec id to the disable/enable_headset_jack_key(), then the headset
button could work.
The quirk of ALC285_FIXUP_THINKPAD_HEADSET_JACK could fix both of these
2 issues.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201205051130.8122-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is disabled, we get a warning for unused functions:
sound/soc/fsl/fsl_aud2htx.c:261:12: error: unused function 'fsl_aud2htx_runtime_suspend' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_suspend(struct device *dev)
sound/soc/fsl/fsl_aud2htx.c:271:12: error: unused function 'fsl_aud2htx_runtime_resume' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_resume(struct device *dev)
Mark these as __maybe_unused to avoid the warning without adding
an #ifdef.
Fixes: 8a24c834c053 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201203222900.1042578-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201203154010.29464-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with
ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!
Make this is a strict dependency.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc points out a memory area that is copied to a device
but not initialized:
sound/soc/codecs/cros_ec_codec.c: In function 'i2s_rx_event':
arch/x86/include/asm/string_32.h:83:20: error: '*((void *)&p+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
83 | *((int *)to + 1) = *((int *)from + 1);
Initialize all the unused fields to zero.
Fixes: 727f1c71c780 ("ASoC: cros_ec_codec: refactor I2S RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203225458.1477830-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
