IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[WHY]
When on the desktop freesync is not enabled,
doing a frame stretch causes the TV to display
undesired output.
[HOW]
By changing the logic so that when ever fresync
is supported the TV is notified we are in fressync
instead on a non fresync state.
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The driver always wants to synchronize streams
to the first edge of master's vsync pulse.
In order to determine that we can read timing
flags that are used to program vsync.
Master stream's vsync polarity - Multi Display Stream Synchronization edge:
Negative - Falling Edge
Positive - Rising Edge
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to be able to trigger software hotplug for MST connectors
[How]
For unplug the driver calls to disable topologies manager
that connector is attached to. For plugging in it does the
whole rediscovery of all connectors in drm device and enbles their
topologies if attached.
The interface for MST connectors works in the following way:
1. To disconnect all MST topologies currently connected:
echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst
2. To reconnect/rediscover all topologies that are physically
connected to the card:
echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst
A related fix which has been merged with this patch
Leo Ma(Hanghong Ma)'s work:
Set power states before disable MST topology
[Why]
When we try to disable MST topology from the
debugfs entry, some receiver will hang.
[How]
Set DPCD 600h power states to
2(power down mode)before disable MST topology.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why/how]
Skip logic that sets preffered link settings
and just retrain with new link_settings from Debugfs
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN3 is not reusing DCN1 mask_sh_list, causing
SURFACE_FLIP_INT_MASK missing in the mapping.
[How]
Add the corresponding entry to DCN3 list.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Commit 1c85f3db778ffbeba91d71e9d6c8aa299f9b4efd
("drm/amd/display: Add kernel doc to crc_rd_wrk
field") adds kernel doc for crc_rd_wrk field in
amdgpu_dm.h but it's incorrectly formatted.
Make htmldocs warns:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:398: warning:
Incorrect use of kernel-doc format: * @crc_rd_wrk
[How]
Tweak the kernel doc for crc_rd_wrk.
Fixes: 1c85f3db778ffb ("drm/amd/display: Add kernel doc to crc_rd_wrk field")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why/how]
Due to compiler optimization the values would be
passed to the division function uninitialized
causing a div by zero. Initialize the numerator
and denominator to 0 and 1 to prevent division
by zero.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently to view the DCC_EN bit the entire DTN log
must be dumped. A compact method to view the DCC_EN
bit is desirable.
[how]
Introduce new debugfs interface that only dumps the
DCC_EN bit.
Example usage:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add debug flag for an option to disable min fclk.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add debug prints for SMU messages with regard to
versions, clocks, and more.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Robin Singh <Robin.Singh@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to keep track of the number of eDP links to
properly enumerate edp panel control instance.
[How]
Added dc_edp_id_count to dc_context to keep track of
number of eDP links.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Functionality of LTTPR is reporter through the DPCD register
[How]
Expose a interface in debugfs to read the current status of
LTTPR as reported from the device's DPCD register
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The OTG_VUPDATE_KEEPOUT register and fields is
available on DCN10, and named the same in DCN20.
[How]
Move register definition and programming function
to dcn10 optc.
There is no functional change.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is case when the userspace like IGT test updates the custom
timings, i.e. the number of active lines CRTC property value,
and without committing the change, followed by
resetting the display, creating FB and plane to the pipe
and committing. The NULL pointer of pipe_ctx->plane_state
occurs and result in kernel crash. We need to avoid that.
[how]
add pointer check for the dc_plane_state of the pipe context in
the call of committing planes for stream in DC component.
Signed-off-by: Robin Singh <robin.singh@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In MST setup, we'd use MST downstream AUX to
dump the DPRX CRCs from sink device.
[how]
Assign the mst_port->aux to read DPCD registers.
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Today a parameter is passed to dmub_srv_send_gpint_command
which specifies the max amount of time to wait for the command
to be acked.
This parameter instead specifies the number of times to check if
the command was acked.
We wish to add a lower bound to the timeout, which can be
accomplished by using a delay or a timestamp.
It has been decided to use udelay instead of a timestamp simply
because we don't want to expose a high precision counter if it
doesn't yield large benefits.
[How]
Add udelay(1) between each for loop iteration.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
GPINT command to get PSR state from FW times out.
[How]
Add retry to get valid PSR state.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct mod_hdcp is declared twice. One is declared at 33rd line.
The blew one is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use uintptr_t rather than uint64_t.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
[why]
Our CI enables drm.debug=0x4 logs and the dmesg is flooded with cursor
updates. We probably want to avoid spamming the log with DRM_DEBUG_KMS.
[how]
Define and use pr_debug macros instead of a few spammy DRM_DEBUG_*'s.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.
On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following features/fixes:
- LTTPR improvements
- Disable MALL when SMU not present
- Fix bug in HW that causes P-State to hang when DPG is enabled in
certain conditions
- Update code path for enabling DPG
- Update display endpoint control path
- Add dynamic link encoder selection
- Fix debugfs MST topology to dump from the root MST node
- Enable DP DSC Compliance automation for Linux
- ASSR is enabled only when DPCD is supported and the display
connected is internal
- Added kernel trace event to print real-time refresh rate value
to debug VRR issues
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Bring-up purpose code to disable DMUB calling into
SMU and timeout for MALL when SMU is not present.
[How]
Disable MALL when SMU is not present.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is a bug in HW that causes P-State to hang when DPG is enabled in
certain conditions.
[HOW]
The solution is to force MIN_TTU_VBLANK register to maximum value
whenever DPG has been enabled.
Make stream do a full update on test pattern change, so that the TTUs
get updated.
When DPG is enabled, update the ttu_regs.min_ttu_vblank field of each
pipe in the stream's topology to the maximum value (0xffffff).
v2: squash in build fix for when DCN is not defined (Alex)
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to make enabling test pattern a part of the
stream update code path. This change is the first step
towards that goal.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some display endpoints may be dynamically mapped to the link encoders
which drive them.
[How]
Update the code paths for display enabling/disabling to accommodate
the dynamic association between links and link encoders.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some display endpoints may be programmably mapped to compatible link
encoders. The assignment of link encoders to links has to be dynamic to
accommodate the increased flexibility in comparison to conventional
display endpoints.
[How]
- Add link encoder assignment tracking variables.
- Execute link encoder assignment algorithm before enabling link and
release link encoders from links once they are disabled.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The drm dump_topology function was previously called on all
DP connectors. This resulted in empty topology dumps for those
connectors which weren't root MST nodes.
[how]
Make sure we only dump topology from the root MST node.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some systems can enable LTTPR through bits in BIOS, while other systems
can be configured at boot to enable LTTPR. Some configs enable
Non-Transparent mode, while others enable Transparent mode.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are three possible modes for LTTPR:
- Non-LTTPR mode, where AUX timeout is 400 us and no per-hop link
training is done
- LTTPR Transparent mode, where AUX timeout is 3200 us and no per-hop
link training is done
- LTTPR Non-Transparent mode, where AUX timeout is 3200 us and per-hop
link training is done
[HOW]
Use an enum instead of a bool to track LTTPR state; modify comparisons
accordingly.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The logic to toggle LTTPR transparent/non-transparent requires 2 flags
provided by BIOS
[HOW]
Repurpose the interface to get dce caps so both LTTPR querying functions
can use them.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Word "remainder" was misspelled as "reminder" in
reduceSizeAndFraction method variable.
[how]
Fix the spelling.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Alexander Deucher <alexander.deucher@amd.com>
Reviewed-by: Bindu R <Bindu.R@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Color depth data is not parsed during test requests.
[How]
Update display color depth according to color depth
request from the test equipment.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ASSR enabling only considers capability declared in DPCD.
We also need to check whether the connector is internal.
[How]
ASSR enabling need to check both DPCD capability and internal display
flag.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Static analysis on linux-next has found a potential null pointer
dereference;
[How]
Refactor the function, add ASSERT and remove the unnecessary check.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we have to debug VRR issues, we usually want to know the current
refresh rate; for this reason, it is handy to have a way to check in
real-time the refresh rate value. This commit introduces a kernel trace
that can provide such information.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some platforms will have LTTPR capabilities forced on by VBIOS flags;
the functions added here will access those flags.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This was a regression introduced by commit:
drm/amd/display: Skip modeset for front porch change
Due to the change how timing parameters were set, scaled modes would
cause a black screen on some eDP panels. Would probably apply to
other displays (i.e. even non-eDP) that only have scaled modes,
but such case is not that usual for external displays.
[how]
Pick up crtc frame dimensions when programming the timing unless
it's FreeSync video mode.
Fixes: 6f59f229f8ed7a ("drm/amd/display: Skip modeset for front porch change")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes the primary plane might not be initialized (yet), which
causes dm_check_crtc_cursor to divide by zero.
Apparently a weird state before a S3-suspend causes the aforementioned
divide-by-zero error when resuming from S3. This was explained in
bug 212293 on Bugzilla.
To avoid this divide-by-zero error we check if the primary plane's fb
isn't NULL. If it's NULL the src_w and src_h attributes will be 0,
which would cause a divide-by-zero.
This fixes Bugzilla report 212293
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=212293
Fixes: 12f4849a1cfd69f3 ("drm/amd/display: check cursor scaling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
idle optimization was being disabled after commit.
[How]
check vblank count for display off and enable idle optimization based on this count.
Also,check added to ensure vblank count does not decrement, when count reaches 0.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On initializing the framebuffer, call drm_any_plane_has_format to do a
check if the modifier is supported. drm_any_plane_has_format calls
dm_plane_format_mod_supported which is extended to validate that the
modifier is on the list of the plane's supported modifiers.
The bug was caught using igt-gpu-tools test: kms_addfb_basic.addfb25-bad-modifier
Tested on ChromeOS Zork by turning on the display, running an overlay
test, and running a YT video.
=== Changes from v1 ===
Explicitly handle DRM_FORMAT_MOD_INVALID modifier.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing code that is not used at the moment.
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert IRQ-based prints from DRM_DEBUG_DRIVER to
the appropriate DRM log type, since IRQ-based
prints drown out the rest of the driver's
DRM_DEBUG_DRIVER messages.
v2: Update as per feedback to fine-tune for each
type of DRM log level.
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
