IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We may end up with no planes set yet, depending on the ordering, but we
should have the proper blanking state which is either handled by either
DPG or TG depending on the hardware generation. Check both to determine
the proper blanked state.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/781
Fixes: 5fc0cbfad45648 ("drm/amd/display: determine if a pipe is synced by plane state")
Cc: nicholas.kazlauskas@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 96cb7cf13d8530099c256c053648ad576588c387.
This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 96cb7cf13d8530099c256c053648ad576588c387.
This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When determining synchronzied vblank we don't need to compare the stream
with itself
[How]
If comparing same stream, continue to next iteration
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Combine all interface dependencies between driver and fw into a
single header file
- Add FW Versioning to the dmub_cmd.h file
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We hit an issue which driver reallocate a pipe from desktop bottom
pipe to video bottom pipe. In this case, driver need to re-enable
plane.
[how]
Enable plane if container of plane status changed.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to better encapsulate all driver-fw dependencies into a single
file.
[How]
Combine all the headers under inc folder into a single header
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Diagnostics DIO test with eDP not connected is required to run
[How]
Allow Diagnostics test with eDP not connected to skip link detection but
still execute DIO test
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unit enter to S4, garbage show on screen when do OPTC blank.
[How]
Wait for vblank then do OPTC blank
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are scenarios where no OPP is assigned to an OTG so its value is
0xF which is outside the size of the OPP array causing a potential
driver crash.
[How]
Change the assert to an early return to guard against access. If
there's no OPP assigned already, then OTG will be blank anyways so no
functionality should be lost.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To facilitate DM removing the dependency between dc and the firmware
binary.
[HOW]
Setting the default values to match VBIOS: 64 KB. These values are only
used if meta is absent.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Link loss currently only retrains and re-enables the stream. This can
cause issues for some sinks.
[How]
When link loss occurs, the link and stream(s) should be completely
disabled and then reenabled.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current implementation is slightly inaccurate and will often
result in truncation/floor operation decrementing an exact
integer output by 1.
Only rounded down output is ever expected, just extract the fp
exponent for this to increase performance and avoid any
truncation issues.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously we used link signal type to get the caps. We should use the
sink signal type
[How]
Use sink signal type instead of link signal type
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link_status is incorrect cause driver power off eDP when backlight
on. Some eDP panels may show garbage on screen.
[How]
Correct link_status when power off encoder
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Warnings in the kernel are generally treated as errors.
The BREAK_TO_DEBUGGER macro is not a critical error or warning, but
rather intended for developer use to help investigate behavior and
sequences for other issues.
We do still make use of DC_ERROR/ASSERT(0) in various places in the
code for things that are genuine issues.
Since most developers don't actually KGDB while debugging the kernel
these essentially would have no value on their own since the KGDB
breakpoint wouldn't trigger - ASSERT(0) was used as a shortcut to get
a stacktrace.
[How]
Turn it into a DRM_DEBUG_DRIVER print instead. We unfortunately lose
the stacktrace, but we still do retain some of the useful debug
information this offers by having at least the function and line
number loggable.
If KGDB is supported in the kernel this will still trigger a real
breakpoint as well.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dal side nv12 wa has a lot of side effects.
KMD side wa is used, so this should be remove.
[How]
Removed wa from dal side.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the correct value to immediate flip required field.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change removes internal rounding in dml_log2 function.
Dml_log2 is expected to return a float output. In case an int is needed
dml will floor the output on it's own.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Region 4 is non cacheable and slower than using cache window 4.
[How]
Check the firmware version to determine how we should program the
base address and memory windows.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to switch over the inbox from region4 to cw4 we need to know if
the firmware is capable of properly invalidating the cache before
reading the commands.
Easiest way is to just check the firmware version, but we don't have the
helper macros or a way for the dmub_srv to know what version it is.
[How]
Add a new fw_version field to the creation parameters that driver can
optional pass in. Assumes a version of 0x00000000 is invalid.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently we're copying the entire bios image into vbios. Loading time
for FW with entire bios(54272 bytes) is 105138us. By copying only the
sections of bios we're using(4436 bytes), loading time drops to 104326us
which saves us 812us.
[HOW]
ROM header, master data table, and all data tables will be packed in
contiguous manner. The offsets for the data tables are remapped to their
newly packed location.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP link layer CTS specs updated to change the test parameters in test
4.2.1.1.
Before it requires source to delay 400us on aux no reply.
With the specs updates Errata5, it requires source to delay 3.2ms
(based on LTTPR aux timeout)
This causes our test to fail after updating with the latest test
equipment firmware.
[how]
the change is to allow LTTPR 3.2ms aux timeout delay by default.
And only set to 400us if LTTPR is not present.
Before this piece of logic is interwined with LTTPR support.
Now we will default to 3.2ms aux timeout even if LTTPR support is not
enabled by driver.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to packing of abm_config_table, memory addresses aren't aligned to
32 bit boundary dmcub prefers. Therefore when using pointers to this
structure, it's possible that dmcub will automatically align the data
read from that address, yielding incorrect values.
[How]
Instead of packing 1 byte boundary, explicitly pack values to 4 byte
boundary. Since there is a dependency on the existing iram table
structure on driver side, we must copy to a second structure, which is
aligned correctly, before passing to fw.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian Koenig pointed out a code duplication related to bit swap in
case of big-endian manipulation. This commit adds a helper for handling
this verification and reduces the requirement of replicate some part of
the code.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If bss_data_size is 0 then we shouldn't be passing down fw_bss_data into
the DMUB service since the region isn't really "valid."
[How]
Pass NULL instead if the size is 0.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New unified firmware binary with only inst const still passes down
fw_bss_data != NULL and params->bss_data_size == 0 from DM.
This leads it into the legacy path causing firmware state allocation to
be too small.
[How]
Check bss_data_size as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Failing validation when building scaling parameters causes corruption to
occur due to pipe splitting with smaller pixel widths than HW supports.
This needs to fail silently for now to hide the corruption until the
corruption itself can be fixed.
[HOW]
Do not fail validation if building scaling params fails.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Remove dm_write_persistent_data and dm_read_persistent_data as
persistence should be handled in DM.
[How]
Remove functions. Move read/write calls into DM layer while maintaining
logic.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If VUPDATE_END is before VUPDATE_START the delay calculated can become
very large, causing a soft hang.
[How]
Take the absolute value of the difference between START and END.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
get_cursor_position already handles the case where the cursor has
negative off-screen coordinates by not setting
dc_cursor_position.enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Previously we used the s3 codepath for gpu reset. This can lead to issues in
certain case where we end of waiting for fences which will never come (because
parts of the hw are off due to gpu reset) and we end up waiting forever causing
a deadlock.
[How]
Handle GPU reset separately from normal s3 case. We essentially need to redo
everything we do in s3, but avoid any drm calls.
For GPU reset case
suspend:
-Acquire DC lock
-Cache current dc_state
-Commit 0 stream/planes to dc (this puts dc into a state where it can be
powered off)
-Disable interrupts
resume
-Edit cached state to force full update
-Commit cached state from suspend
-Build stream and plane updates from the cached state
-Commit stream/plane updates
-Enable interrupts
-Release DC lock
v2:
-Formatting
-Release dc_state
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When disconnect fe from be, something such as unstable clock may cause
garbage occurs.
[How]
Send set avmute at the beginning of disable stream and send reset avmute
at the end of enable stream.
Signed-off-by: Jinze Xu <jinze.xu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When "max bpc" is set to enable deep color, some modes are removed from
the list if they fail validation on max bpc. These modes should be kept
if they validates fine with lower bpc.
[How]
- Retry with lower bpc in mode validation.
- Same in atomic commit to apply working bpc, not necessarily max bpc.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save the correct num vmid during resource creation and fix RN gpuvm
level from 1 to 16 vmid entries.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The minimum plane size we can support in DML is 16x16. If we try to pass
a 16x16 plane with dynamic pipe split then validation will fail since it
tries to split it into two pipes, each 8x8.
Some userspace doesn't check that the commit fails and because the
commit fails the old state is retained, resulting in corruption.
[How]
Add a workaround to avoid pipe split if any plane is 16x16 or smaller.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We dropped the delay after changed the cursor functions locking the
entire pipe to locking just the CURSOR registers to fix page flip
stuttering - this introduced cursor stuttering instead, and an underflow
issue.
The cursor update can be delayed indefinitely if the cursor update
repeatedly happens right around VUPDATE.
The underflow issue can happen if we do a viewport update on a pipe
on the same frame where a cursor update happens around VUPDATE - the
old cursor registers are retained which can be in an invalid position.
This can cause a pipe hang and indefinite underflow.
[How]
The complex, ideal solution to the problem would be a software
triple buffering mechanism from the DM layer to program only one cursor
update per frame just before VUPDATE.
The simple workaround until we have that infrastructure in place is
this change - bring back the delay until VUPDATE before locking, but
with some corrections to the calculations.
This didn't work for all timings before because the calculation for
VUPDATE was wrong - it was using the offset from VSTARTUP instead and
didn't correctly handle the case where VUPDATE could be in the back
porch.
Add a new hardware sequencer function to use the existing helper to
calculate the real VUPDATE start and VUPDATE end - VUPDATE can last
multiple lines after all.
Change the udelay to incorporate the width of VUPDATE as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP training sequence to set SCRAMBLING_DISABLE bit properly based on
training pattern - per DP Spec.
[How]
Update dpcd_pattern.v1_4.SCRAMBLING_DISABLE with 1 for TPS1, TPS2, TPS3,
but not for TPS4.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the rework for removing the FPU issues, I found the following
warning:
[..] dml_common_defs.o: warning: objtool: dml_round()+0x9: FPU
instruction outside of kernel_fpu_{begin,end}()
This file has a single function that does not need to be in a specific
file. This commit drop dml_common_defs file, and move dml_round function
to dml_inline_defs.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
