a667cb7a94
13298 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mike Kravetz
|
c86aa7bbfd |
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs page faults can race with truncate and hole punch operations.
Current code in the page fault path attempts to handle this by 'backing
out' operations if we encounter the race. One obvious omission in the
current code is removing a page newly added to the page cache. This is
pretty straight forward to address, but there is a more subtle and
difficult issue of backing out hugetlb reservations. To handle this
correctly, the 'reservation state' before page allocation needs to be
noted so that it can be properly backed out. There are four distinct
possibilities for reservation state: shared/reserved, shared/no-resv,
private/reserved and private/no-resv. Backing out a reservation may
require memory allocation which could fail so that needs to be taken into
account as well.
Instead of writing the required complicated code for this rare occurrence,
just eliminate the race. i_mmap_rwsem is now held in read mode for the
duration of page fault processing. Hold i_mmap_rwsem longer in truncation
and hold punch code to cover the call to remove_inode_hugepages.
With this modification, code in remove_inode_hugepages checking for races
becomes 'dead' as it can not longer happen. Remove the dead code and
expand comments to explain reasoning. Similarly, checks for races with
truncation in the page fault path can be simplified and removed.
[mike.kravetz@oracle.com: incorporat suggestions from Kirill]
Link: http://lkml.kernel.org/r/20181222223013.22193-3-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20181218223557.5202-3-mike.kravetz@oracle.com
Fixes:
|
||
|
Mike Kravetz
|
b43a999005 |
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with the
ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is
called.
[mike.kravetz@oracle.com: add explicit check for mapping != null]
Link: http://lkml.kernel.org/r/20181218223557.5202-2-mike.kravetz@oracle.com
Fixes:
|
||
Kirill Tkhai
|
451b9514a5 |
mm: remove __hugepage_set_anon_rmap()
This function is identical to __page_set_anon_rmap() since the time, when it was introduced (8 years ago). The patch removes the function, and makes its users to use __page_set_anon_rmap() instead. Link: http://lkml.kernel.org/r/154504875359.30235.6237926369392564851.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Benjamin Poirier
|
af3b854492 |
mm/page_alloc.c: allow error injection
Model call chain after should_failslab(). Likewise, we can now use a kprobe to override the return value of should_fail_alloc_page() and inject allocation failures into alloc_page*(). This will allow injecting allocation failures using the BCC tools even without building kernel with CONFIG_FAIL_PAGE_ALLOC and booting it with a fail_page_alloc= parameter, which incurs some overhead even when failures are not being injected. On the other hand, this patch adds an unconditional call to should_fail_alloc_page() from page allocation hotpath. That overhead should be rather negligible with CONFIG_FAIL_PAGE_ALLOC=n when there's no kprobe attached, though. [vbabka@suse.cz: changelog addition] Link: http://lkml.kernel.org/r/20181214074330.18917-1-bpoirier@suse.com Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jan Kara
|
ab41ee6879 |
mm: migrate: drop unused argument of migrate_page_move_mapping()
All callers of migrate_page_move_mapping() now pass NULL for 'head' argument. Drop it. Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jan Kara
|
89cb0888ca |
mm: migrate: provide buffer_migrate_page_norefs()
Provide a variant of buffer_migrate_page() that also checks whether there are no unexpected references to buffer heads. This function will then be safe to use for block device pages. [akpm@linux-foundation.org: remove EXPORT_SYMBOL(buffer_migrate_page_norefs)] Link: http://lkml.kernel.org/r/20181211172143.7358-5-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jan Kara
|
84ade7c15c |
mm: migrate: move migrate_page_lock_buffers()
buffer_migrate_page() is the only caller of migrate_page_lock_buffers() move it close to it and also drop the now unused stub for !CONFIG_BLOCK. Link: http://lkml.kernel.org/r/20181211172143.7358-4-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jan Kara
|
cc4f11e69f |
mm: migrate: lock buffers before migrate_page_move_mapping()
Lock buffers before calling into migrate_page_move_mapping() so that that function doesn't have to know about buffers (which is somewhat unexpected anyway) and all the buffer head logic is in buffer_migrate_page(). Link: http://lkml.kernel.org/r/20181211172143.7358-3-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jan Kara
|
0b3901b38d |
mm: migration: factor out code to compute expected number of page references
Patch series "mm: migrate: Fix page migration stalls for blkdev pages". This patchset deals with page migration stalls that were reported by our customer due to a block device page that had a bufferhead that was in the bh LRU cache. The patchset modifies the page migration code so that bufferheads are completely handled inside buffer_migrate_page() and then provides a new migration helper for pages with buffer heads that is safe to use even for block device pages and that also deals with bh lrus. This patch (of 6): Factor out function to compute number of expected page references in migrate_page_move_mapping(). Note that we move hpage_nr_pages() and page_has_private() checks from under xas_lock_irq() however this is safe since we hold page lock. [jack@suse.cz: fix expected_page_refs()] Link: http://lkml.kernel.org/r/20181217131710.GB8611@quack2.suse.cz Link: http://lkml.kernel.org/r/20181211172143.7358-2-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wei Yang
|
d9367bd06f |
mm, page_alloc: enable pcpu_drain with zone capability
drain_all_pages is documented to drain per-cpu pages for a given zone (if non-NULL). The current implementation doesn't match the description though. It will drain all pcp pages for all zones that happen to have cached pages on the same cpu as the given zone. This will lead to premature pcp cache draining for zones that are not of any interest to the caller - e.g. compaction, hwpoison or memory offline. This forces the page allocator to take locks and potential lock contention as a result. There is no real reason for this sub-optimal implementation. Replace per-cpu work item with a dedicated structure which contains a pointer to the zone and pass it over to the worker. This will get the zone information all the way down to the worker function and do the right job. [akpm@linux-foundation.org: avoid 80-col tricks] [mhocko@suse.com: refactor the whole changelog] Link: http://lkml.kernel.org/r/20181212142550.61686-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sri Krishna chowdary
|
d53ce04227 |
kmemleak: add config to select auto scan
Kmemleak scan can be cpu intensive and can stall user tasks at times. To prevent this, add config DEBUG_KMEMLEAK_AUTO_SCAN to enable/disable auto scan on boot up. Also protect first_run with DEBUG_KMEMLEAK_AUTO_SCAN as this is meant for only first automatic scan. Link: http://lkml.kernel.org/r/1540231723-7087-1-git-send-email-prpatel@nvidia.com Signed-off-by: Sri Krishna chowdary <schowdary@nvidia.com> Signed-off-by: Sachin Nikam <snikam@nvidia.com> Signed-off-by: Prateek <prpatel@nvidia.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Waiman Long
|
3c0c12cc8f |
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
When CONFIG_KASAN is enabled on large memory SMP systems, the deferrred
pages initialization can take a long time. Below were the reported init
times on a 8-socket 96-core 4TB IvyBridge system.
1) Non-debug kernel without CONFIG_KASAN
[ 8.764222] node 1 initialised, 132086516 pages in 7027ms
2) Debug kernel with CONFIG_KASAN
[ 146.288115] node 1 initialised, 132075466 pages in 143052ms
So the page init time in a debug kernel was 20X of the non-debug kernel.
The long init time can be problematic as the page initialization is done
with interrupt disabled. In this particular case, it caused the
appearance of following warning messages as well as NMI backtraces of all
the cores that were doing the initialization.
[ 68.240049] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 68.241000] rcu: 25-...0: (100 ticks this GP) idle=b72/1/0x4000000000000000 softirq=915/915 fqs=16252
[ 68.241000] rcu: 44-...0: (95 ticks this GP) idle=49a/1/0x4000000000000000 softirq=788/788 fqs=16253
[ 68.241000] rcu: 54-...0: (104 ticks this GP) idle=03a/1/0x4000000000000000 softirq=721/825 fqs=16253
[ 68.241000] rcu: 60-...0: (103 ticks this GP) idle=cbe/1/0x4000000000000000 softirq=637/740 fqs=16253
[ 68.241000] rcu: 72-...0: (105 ticks this GP) idle=786/1/0x4000000000000000 softirq=536/641 fqs=16253
[ 68.241000] rcu: 84-...0: (99 ticks this GP) idle=292/1/0x4000000000000000 softirq=537/537 fqs=16253
[ 68.241000] rcu: 111-...0: (104 ticks this GP) idle=bde/1/0x4000000000000000 softirq=474/476 fqs=16253
[ 68.241000] rcu: (detected by 13, t=65018 jiffies, g=249, q=2)
The long init time was mainly caused by the call to kasan_free_pages() to
poison the newly initialized pages. On a 4TB system, we are talking about
almost 500GB of memory probably on the same node.
In reality, we may not need to poison the newly initialized pages before
they are ever allocated. So KASAN poisoning of freed pages before the
completion of deferred memory initialization is now disabled. Those pages
will be properly poisoned when they are allocated or freed after deferred
pages initialization is done.
With this change, the new page initialization time became:
[ 21.948010] node 1 initialised, 132075466 pages in 18702ms
This was still about double the non-debug kernel time, but was much
better than before.
Link: http://lkml.kernel.org/r/1544459388-8736-1-git-send-email-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Pingfan Liu
|
125b860b25 |
mm/pageblock: throw compile error if pageblock_bits cannot hold MIGRATE_TYPES
Currently, NR_PAGEBLOCK_BITS and MIGRATE_TYPES are not associated by code. If someone adds extra migrate type, then he may forget to enlarge the NR_PAGEBLOCK_BITS. Hence it requires some way to fix. NR_PAGEBLOCK_BITS depends on MIGRATE_TYPES, while these macro spread on two different .h file with reverse dependency, it is a little hard to refer to MIGRATE_TYPES in pageblock-flag.h. This patch tries to remind such relation in compiling-time. Link: http://lkml.kernel.org/r/1544508709-11358-1-git-send-email-kernelfans@gmail.com Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill Tkhai
|
fcf9a0ef8d |
ksm: react on changing "sleep_millisecs" parameter faster
ksm thread unconditionally sleeps in ksm_scan_thread() after each iteration: schedule_timeout_interruptible( msecs_to_jiffies(ksm_thread_sleep_millisecs)) The timeout is configured in /sys/kernel/mm/ksm/sleep_millisecs. In case of user writes a big value by a mistake, and the thread enters into schedule_timeout_interruptible(), it's not possible to cancel the sleep by writing a new smaler value; the thread is just sleeping till timeout expires. The patch fixes the problem by waking the thread each time after the value is updated. This also may be useful for debug purposes; and also for userspace daemons, which change sleep_millisecs value in dependence of system load. Link: http://lkml.kernel.org/r/154454107680.3258.3558002210423531566.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
e0975b2aae |
mm, fault_around: do not take a reference to a locked page
filemap_map_pages takes a speculative reference to each page in the range before it tries to lock that page. While this is correct it also can influence page migration which will bail out when seeing an elevated reference count. The faultaround code would bail on seeing a locked page so we can pro-actively check the PageLocked bit before page_cache_get_speculative and prevent from pointless reference count churn. Link: http://lkml.kernel.org/r/20181211142741.2607-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
bb8965bd82 |
mm, memory_hotplug: deobfuscate migration part of offlining
Memory migration might fail during offlining and we keep retrying in that case. This is currently obfuscated by goto retry loop. The code is hard to follow and as a result it is even suboptimal becase each retry round scans the full range from start_pfn even though we have successfully scanned/migrated [start_pfn, pfn] range already. This is all only because check_pages_isolated failure has to rescan the full range again. De-obfuscate the migration retry loop by promoting it to a real for loop. In fact remove the goto altogether by making it a proper double loop (yeah, gotos are nasty in this specific case). In the end we will get a slightly more optimal code which is better readable. [akpm@linux-foundation.org: reflow comments to 80 cols] Link: http://lkml.kernel.org/r/20181211142741.2607-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
a85009c377 |
mm, memory_hotplug: try to migrate full pfn range
Patch series "few memory offlining enhancements". I have been chasing memory offlining not making progress recently. On the way I have noticed few weird decisions in the code. The migration itself is restricted without a reasonable justification and the retry loop around the migration is quite messy. This is addressed by patch 1 and patch 2. Patch 3 is targeting on the faultaround code which has been a hot candidate for the initial issue reported upstream [2] and that I am debugging internally. It turned out to be not the main contributor in the end but I believe we should address it regardless. See the patch description for more details. [1] http://lkml.kernel.org/r/20181120134323.13007-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/20181114070909.GB2653@MiWiFi-R3L-srv This patch (of 3): do_migrate_range has been limiting the number of pages to migrate to 256 for some reason which is not documented. Even if the limit made some sense back then when it was introduced it doesn't really serve a good purpose these days. If the range contains huge pages then we break out of the loop too early and go through LRU and pcp caches draining and scan_movable_pages is quite suboptimal. The only reason to limit the number of pages I can think of is to reduce the potential time to react on the fatal signal. But even then the number of pages is a questionable metric because even a single page migration might block in a non-killable state (e.g. __unmap_and_move). Remove the limit and offline the full requested range (this is one memblock worth of pages with the current code). Should we ever get a report that offlining takes too long to react on fatal signal then we should rather fix the core migration to use killable waits and bailout on a signal. Link: http://lkml.kernel.org/r/20181211142741.2607-1-mhocko@kernel.org Link: http://lkml.kernel.org/r/20181211142741.2607-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
7635d9cbe8 |
mm, thp, proc: report THP eligibility for each vma
Userspace falls short when trying to find out whether a specific memory range is eligible for THP. There are usecases that would like to know that http://lkml.kernel.org/r/alpine.DEB.2.21.1809251248450.50347@chino.kir.corp.google.com : This is used to identify heap mappings that should be able to fault thp : but do not, and they normally point to a low-on-memory or fragmentation : issue. The only way to deduce this now is to query for hg resp. nh flags and confronting the state with the global setting. Except that there is also PR_SET_THP_DISABLE that might change the picture. So the final logic is not trivial. Moreover the eligibility of the vma depends on the type of VMA as well. In the past we have supported only anononymous memory VMAs but things have changed and shmem based vmas are supported as well these days and the query logic gets even more complicated because the eligibility depends on the mount option and another global configuration knob. Simplify the current state and report the THP eligibility in /proc/<pid>/smaps for each existing vma. Reuse transparent_hugepage_enabled for this purpose. The original implementation of this function assumes that the caller knows that the vma itself is supported for THP so make the core checks into __transparent_hugepage_enabled and use it for existing callers. __show_smap just use the new transparent_hugepage_enabled which also checks the vma support status (please note that this one has to be out of line due to include dependency issues). [mhocko@kernel.org: fix oops with NULL ->f_mapping] Link: http://lkml.kernel.org/r/20181224185106.GC16738@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181211143641.3503-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Oppenheimer <bepvte@gmail.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jérôme Glisse
|
ac46d4f3c4 |
mm/mmu_notifier: use structure for invalidate_range_start/end calls v2
To avoid having to change many call sites everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end cakks. No functional changes with this patch. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> From: Jérôme Glisse <jglisse@redhat.com> Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3 fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jérôme Glisse
|
5d6527a784 |
mm/mmu_notifier: use structure for invalidate_range_start/end callback
Patch series "mmu notifier contextual informations", v2. This patchset adds contextual information, why an invalidation is happening, to mmu notifier callback. This is necessary for user of mmu notifier that wish to maintains their own data structure without having to add new fields to struct vm_area_struct (vma). For instance device can have they own page table that mirror the process address space. When a vma is unmap (munmap() syscall) the device driver can free the device page table for the range. Today we do not have any information on why a mmu notifier call back is happening and thus device driver have to assume that it is always an munmap(). This is inefficient at it means that it needs to re-allocate device page table on next page fault and rebuild the whole device driver data structure for the range. Other use case beside munmap() also exist, for instance it is pointless for device driver to invalidate the device page table when the invalidation is for the soft dirtyness tracking. Or device driver can optimize away mprotect() that change the page table permission access for the range. This patchset enables all this optimizations for device drivers. I do not include any of those in this series but another patchset I am posting will leverage this. The patchset is pretty simple from a code point of view. The first two patches consolidate all mmu notifier arguments into a struct so that it is easier to add/change arguments. The last patch adds the contextual information (munmap, protection, soft dirty, clear, ...). This patch (of 3): To avoid having to change many callback definition everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end callback. No functional changes with this patch. [akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc] Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband] Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
b15c87263a |
hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined
We have received a bug report that an injected MCE about faulty memory
prevents memory offline to succeed on 4.4 base kernel. The underlying
reason was that the HWPoison page has an elevated reference count and the
migration keeps failing. There are two problems with that. First of all
it is dubious to migrate the poisoned page because we know that accessing
that memory is possible to fail. Secondly it doesn't make any sense to
migrate a potentially broken content and preserve the memory corruption
over to a new location.
Oscar has found out that 4.4 and the current upstream kernels behave
slightly differently with his simply testcase
===
int main(void)
{
int ret;
int i;
int fd;
char *array = malloc(4096);
char *array_locked = malloc(4096);
fd = open("/tmp/data", O_RDONLY);
read(fd, array, 4095);
for (i = 0; i < 4096; i++)
array_locked[i] = 'd';
ret = mlock((void *)PAGE_ALIGN((unsigned long)array_locked), sizeof(array_locked));
if (ret)
perror("mlock");
sleep (20);
ret = madvise((void *)PAGE_ALIGN((unsigned long)array_locked), 4096, MADV_HWPOISON);
if (ret)
perror("madvise");
for (i = 0; i < 4096; i++)
array_locked[i] = 'd';
return 0;
}
===
+ offline this memory.
In 4.4 kernels he saw the hwpoisoned page to be returned back to the LRU
list
kernel: [<ffffffff81019ac9>] dump_trace+0x59/0x340
kernel: [<ffffffff81019e9a>] show_stack_log_lvl+0xea/0x170
kernel: [<ffffffff8101ac71>] show_stack+0x21/0x40
kernel: [<ffffffff8132bb90>] dump_stack+0x5c/0x7c
kernel: [<ffffffff810815a1>] warn_slowpath_common+0x81/0xb0
kernel: [<ffffffff811a275c>] __pagevec_lru_add_fn+0x14c/0x160
kernel: [<ffffffff811a2eed>] pagevec_lru_move_fn+0xad/0x100
kernel: [<ffffffff811a334c>] __lru_cache_add+0x6c/0xb0
kernel: [<ffffffff81195236>] add_to_page_cache_lru+0x46/0x70
kernel: [<ffffffffa02b4373>] extent_readpages+0xc3/0x1a0 [btrfs]
kernel: [<ffffffff811a16d7>] __do_page_cache_readahead+0x177/0x200
kernel: [<ffffffff811a18c8>] ondemand_readahead+0x168/0x2a0
kernel: [<ffffffff8119673f>] generic_file_read_iter+0x41f/0x660
kernel: [<ffffffff8120e50d>] __vfs_read+0xcd/0x140
kernel: [<ffffffff8120e9ea>] vfs_read+0x7a/0x120
kernel: [<ffffffff8121404b>] kernel_read+0x3b/0x50
kernel: [<ffffffff81215c80>] do_execveat_common.isra.29+0x490/0x6f0
kernel: [<ffffffff81215f08>] do_execve+0x28/0x30
kernel: [<ffffffff81095ddb>] call_usermodehelper_exec_async+0xfb/0x130
kernel: [<ffffffff8161c045>] ret_from_fork+0x55/0x80
And that latter confuses the hotremove path because an LRU page is
attempted to be migrated and that fails due to an elevated reference
count. It is quite possible that the reuse of the HWPoisoned page is some
kind of fixed race condition but I am not really sure about that.
With the upstream kernel the failure is slightly different. The page
doesn't seem to have LRU bit set but isolate_movable_page simply fails and
do_migrate_range simply puts all the isolated pages back to LRU and
therefore no progress is made and scan_movable_pages finds same set of
pages over and over again.
Fix both cases by explicitly checking HWPoisoned pages before we even try
to get reference on the page, try to unmap it if it is still mapped. As
explained by Naoya:
: Hwpoison code never unmapped those for no big reason because
: Ksm pages never dominate memory, so we simply didn't have strong
: motivation to save the pages.
Also put WARN_ON(PageLRU) in case there is a race and we can hit LRU
HWPoison pages which shouldn't happen but I couldn't convince myself about
that. Naoya has noted the following:
: Theoretically no such gurantee, because try_to_unmap() doesn't have a
: guarantee of success and then memory_failure() returns immediately
: when hwpoison_user_mappings fails.
: Or the following code (comes after hwpoison_user_mappings block) also impli=
: es
: that the target page can still have PageLRU flag.
:
: /*
: * Torn down by someone else?
: */
: if (PageLRU(p) && !PageSwapCache(p) && p->mapping =3D=3D NULL) {
: action_result(pfn, MF_MSG_TRUNCATED_LRU, MF_IGNORED);
: res =3D -EBUSY;
: goto out;
: }
:
: So I think it's OK to keep "if (WARN_ON(PageLRU(page)))" block in
: current version of your patch.
Link: http://lkml.kernel.org/r/20181206120135.14079-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.com>
Debugged-by: Oscar Salvador <osalvador@suse.com>
Tested-by: Oscar Salvador <osalvador@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Oscar Salvador
|
9f1eb38e0e |
mm, kmemleak: little optimization while scanning
kmemleak_scan() goes through all online nodes and tries to scan all used
pages.
We can do better and use pfn_to_online_page(), so in case we have
CONFIG_MEMORY_HOTPLUG, offlined pages will be skiped automatically. For
boxes where CONFIG_MEMORY_HOTPLUG is not present, pfn_to_online_page()
will fallback to pfn_valid().
Another little optimization is to check if the page belongs to the node we
are currently checking, so in case we have nodes interleaved we will not
check the same pfn multiple times.
I ran some tests:
Add some memory to node1 and node2 making it interleaved:
(qemu) object_add memory-backend-ram,id=ram0,size=1G
(qemu) device_add pc-dimm,id=dimm0,memdev=ram0,node=1
(qemu) object_add memory-backend-ram,id=ram1,size=1G
(qemu) device_add pc-dimm,id=dimm1,memdev=ram1,node=2
(qemu) object_add memory-backend-ram,id=ram2,size=1G
(qemu) device_add pc-dimm,id=dimm2,memdev=ram2,node=1
Then, we offline that memory:
# for i in {32..39} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;done
# for i in {48..55} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;don
# for i in {40..47} ; do echo "offline" > /sys/devices/system/node/node2/memory$i/state;done
And we run kmemleak_scan:
# echo "scan" > /sys/kernel/debug/kmemleak
before the patch:
kmemleak: time spend: 41596 us
after the patch:
kmemleak: time spend: 34899 us
[akpm@linux-foundation.org: remove stray newline, per Oscar]
Link: http://lkml.kernel.org/r/20181206131918.25099-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kirill Tkhai
|
c16eb000ca |
mm/filemap.c: remove useless check in pagecache_get_page()
page always is not NULL, so we may remove this useless check. Link: http://lkml.kernel.org/r/154419752044.18559.2452963074922917720.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Oscar Salvador
|
bbe5d9939e |
mm/page_alloc.c: drop uneeded __meminit and __meminitdata
Since commit
|
||
Brian Foster
|
3fa750dcf2 |
mm/page-writeback.c: don't break integrity writeback on ->writepage() error
write_cache_pages() is used in both background and integrity writeback scenarios by various filesystems. Background writeback is mostly concerned with cleaning a certain number of dirty pages based on various mm heuristics. It may not write the full set of dirty pages or wait for I/O to complete. Integrity writeback is responsible for persisting a set of dirty pages before the writeback job completes. For example, an fsync() call must perform integrity writeback to ensure data is on disk before the call returns. write_cache_pages() unconditionally breaks out of its processing loop in the event of a ->writepage() error. This is fine for background writeback, which had no strict requirements and will eventually come around again. This can cause problems for integrity writeback on filesystems that might need to clean up state associated with failed page writeouts. For example, XFS performs internal delayed allocation accounting before returning a ->writepage() error, where applicable. If the current writeback happens to be associated with an unmount and write_cache_pages() completes the writeback prematurely due to error, the filesystem is unmounted in an inconsistent state if dirty+delalloc pages still exist. To handle this problem, update write_cache_pages() to always process the full set of pages for integrity writeback regardless of ->writepage() errors. Save the first encountered error and return it to the caller once complete. This facilitates XFS (or any other fs that expects integrity writeback to process the entire set of dirty pages) to clean up its internal state completely in the event of persistent mapping errors. Background writeback continues to exit on the first error encountered. [akpm@linux-foundation.org: fix typo in comment] Link: http://lkml.kernel.org/r/20181116134304.32440-1-bfoster@redhat.com Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
YueHaibing
|
0ecea993d0 |
mm/hmm.c: remove set but not used variable 'devmem'
Fixes gcc '-Wunused-but-set-variable' warning:
mm/hmm.c: In function 'hmm_devmem_ref_kill':
mm/hmm.c:995:21: warning:
variable 'devmem' set but not used [-Wunused-but-set-variable]
It not used any more since 35d39f953d4e ("mm, hmm: replace
hmm_devmem_pages_create() with devm_memremap_pages()")
Link: http://lkml.kernel.org/r/1543629971-128377-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Wei Yang
|
fa004ab736 |
mm, hotplug: move init_currently_empty_zone() under zone_span_lock protection
During online_pages phase, pgdat->nr_zones will be updated in case this zone is empty. Currently the online_pages phase is protected by the global locks (device_device_hotplug_lock and mem_hotplug_lock), which ensures there is no contention during the update of nr_zones. These global locks introduces scalability issues (especially the second one), which slow down code relying on get_online_mems(). This is also a preparation for not having to rely on get_online_mems() but instead some more fine grained locks. The patch moves init_currently_empty_zone under both zone_span_writelock and pgdat_resize_lock because both the pgdat state is changed (nr_zones) and the zone's start_pfn. Also this patch changes the documentation of node_size_lock to include the protection of nr_zones. Link: http://lkml.kernel.org/r/20181203205016.14123-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
4e0d2e7ef1 |
mm, sparse: pass nid instead of pgdat to sparse_add_one_section()
Since the information needed in sparse_add_one_section() is node id to allocate proper memory, it is not necessary to pass its pgdat. This patch changes the prototype of sparse_add_one_section() to pass node id directly. This is intended to reduce misleading that sparse_add_one_section() would touch pgdat. Link: http://lkml.kernel.org/r/20181204085657.20472-2-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
83af658898 |
mm, sparse: drop pgdat_resize_lock in sparse_add/remove_one_section()
pgdat_resize_lock is used to protect pgdat's memory region information
like: node_start_pfn, node_present_pages, etc. While in function
sparse_add/remove_one_section(), pgdat_resize_lock is used to protect
initialization/release of one mem_section. This looks not proper.
These code paths are currently protected by mem_hotplug_lock currently but
should there ever be any reason for locking at the sparse layer a
dedicated lock should be introduced.
Following is the current call trace of sparse_add/remove_one_section()
mem_hotplug_begin()
arch_add_memory()
add_pages()
__add_pages()
__add_section()
sparse_add_one_section()
mem_hotplug_done()
mem_hotplug_begin()
arch_remove_memory()
__remove_pages()
__remove_section()
sparse_remove_one_section()
mem_hotplug_done()
The comment above the pgdat_resize_lock also mentions "Holding this will
also guarantee that any pfn_valid() stays that way.", which is true with
the current implementation and false after this patch. But current
implementation doesn't meet this comment. There isn't any pfn walkers to
take the lock so this looks like a relict from the past. This patch also
removes this comment.
[richard.weiyang@gmail.com: v4]
Link: http://lkml.kernel.org/r/20181204085657.20472-1-richard.weiyang@gmail.com
[mhocko@suse.com: changelog suggestion]
Link: http://lkml.kernel.org/r/20181128091243.19249-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Qian Cai
|
fed84c7852 |
mm/memblock.c: skip kmemleak for kasan_init()
Kmemleak does not play well with KASAN (tested on both HPE Apollo 70 and
Huawei TaiShan 2280 aarch64 servers).
After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early
log buffer went from something like 280 to 260000 which caused kmemleak
disabled and crash dump memory reservation failed. The multitude of
kmemleak_alloc() calls is from nested loops while KASAN is setting up full
memory mappings, so let early kmemleak allocations skip those
memblock_alloc_internal() calls came from kasan_init() given that those
early KASAN memory mappings should not reference to other memory. Hence,
no kmemleak false positives.
kasan_init
kasan_map_populate [1]
kasan_pgd_populate [2]
kasan_pud_populate [3]
kasan_pmd_populate [4]
kasan_pte_populate [5]
kasan_alloc_zeroed_page
memblock_alloc_try_nid
memblock_alloc_internal
kmemleak_alloc
[1] for_each_memblock(memory, reg)
[2] while (pgdp++, addr = next, addr != end)
[3] while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp)))
[4] while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp)))
[5] while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep)))
Link: http://lkml.kernel.org/r/1543442925-17794-1-git-send-email-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Oscar Salvador
|
2c2a5af6fe |
mm, memory_hotplug: add nid parameter to arch_remove_memory
Patch series "Do not touch pages in hot-remove path", v2.
This patchset aims for two things:
1) A better definition about offline and hot-remove stage
2) Solving bugs where we can access non-initialized pages
during hot-remove operations [2] [3].
This is achieved by moving all page/zone handling to the offline
stage, so we do not need to access pages when hot-removing memory.
[1] https://patchwork.kernel.org/cover/10691415/
[2] https://patchwork.kernel.org/patch/10547445/
[3] https://www.spinics.net/lists/linux-mm/msg161316.html
This patch (of 5):
This is a preparation for the following-up patches. The idea of passing
the nid is that it will allow us to get rid of the zone parameter
afterwards.
Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Wei Yang
|
23b68cfaae |
mm: check nr_initialised with PAGES_PER_SECTION directly in defer_init()
When DEFERRED_STRUCT_PAGE_INIT is configured, only the first section of
each node's highest zone is initialized before defer stage.
static_init_pgcnt is used to store the number of pages like this:
pgdat->static_init_pgcnt = min_t(unsigned long, PAGES_PER_SECTION,
pgdat->node_spanned_pages);
because we don't want to overflow zone's range.
But this is not necessary, since defer_init() is called like this:
memmap_init_zone()
for pfn in [start_pfn, end_pfn)
defer_init(pfn, end_pfn)
In case (pgdat->node_spanned_pages < PAGES_PER_SECTION), the loop would
stop before calling defer_init().
BTW, comparing PAGES_PER_SECTION with node_spanned_pages is not correct,
since nr_initialised is zone based instead of node based. Even
node_spanned_pages is bigger than PAGES_PER_SECTION, its highest zone
would have pages less than PAGES_PER_SECTION.
Link: http://lkml.kernel.org/r/20181122094807.6985-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Hugh Dickins
|
9a1ea439b1 |
mm: put_and_wait_on_page_locked() while page is migrated
Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: |
||
yuzhoujian
|
f0c867d958 |
mm, oom: add oom victim's memcg to the oom context information
The current oom report doesn't display victim's memcg context during the global OOM situation. While this information is not strictly needed, it can be really helpful for containerized environments to locate which container has lost a process. Now that we have a single line for the oom context, we can trivially add both the oom memcg (this can be either global_oom or a specific memcg which hits its hard limits) and task_memcg which is the victim's memcg. Below is the single line output in the oom report after this patch. - global oom context information: oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,global_oom,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid> - memcg oom context information: oom-kill:constraint=<constraint>,nodemask=<nodemask>,cpuset=<cpuset>,mems_allowed=<mems_allowed>,oom_memcg=<memcg>,task_memcg=<memcg>,task=<comm>,pid=<pid>,uid=<uid> [penguin-kernel@I-love.SAKURA.ne.jp: use pr_cont() in mem_cgroup_print_oom_context()] Link: http://lkml.kernel.org/r/201812190723.wBJ7NdkN032628@www262.sakura.ne.jp Link: http://lkml.kernel.org/r/1542799799-36184-2-git-send-email-ufo19890607@gmail.com Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Roman Gushchin <guro@fb.com> Cc: Yang Shi <yang.s@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
yuzhoujian
|
ef8444ea01 |
mm, oom: reorganize the oom report in dump_header
OOM report contains several sections. The first one is the allocation context that has triggered the OOM. Then we have cpuset context followed by the stack trace of the OOM path. The tird one is the OOM memory information. Followed by the current memory state of all system tasks. At last, we will show oom eligible tasks and the information about the chosen oom victim. One thing that makes parsing more awkward than necessary is that we do not have a single and easily parsable line about the oom context. This patch is reorganizing the oom report to 1) who invoked oom and what was the allocation request [ 515.902945] tuned invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 2) OOM stack trace [ 515.904273] CPU: 24 PID: 1809 Comm: tuned Not tainted 4.20.0-rc3+ #3 [ 515.905518] Hardware name: Inspur SA5212M4/YZMB-00370-107, BIOS 4.1.10 11/14/2016 [ 515.906821] Call Trace: [ 515.908062] dump_stack+0x5a/0x73 [ 515.909311] dump_header+0x55/0x28c [ 515.914260] oom_kill_process+0x2d8/0x300 [ 515.916708] out_of_memory+0x145/0x4a0 [ 515.917932] __alloc_pages_slowpath+0x7d2/0xa16 [ 515.919157] __alloc_pages_nodemask+0x277/0x290 [ 515.920367] filemap_fault+0x3d0/0x6c0 [ 515.921529] ? filemap_map_pages+0x2b8/0x420 [ 515.922709] ext4_filemap_fault+0x2c/0x40 [ext4] [ 515.923884] __do_fault+0x20/0x80 [ 515.925032] __handle_mm_fault+0xbc0/0xe80 [ 515.926195] handle_mm_fault+0xfa/0x210 [ 515.927357] __do_page_fault+0x233/0x4c0 [ 515.928506] do_page_fault+0x32/0x140 [ 515.929646] ? page_fault+0x8/0x30 [ 515.930770] page_fault+0x1e/0x30 3) OOM memory information [ 515.958093] Mem-Info: [ 515.959647] active_anon:26501758 inactive_anon:1179809 isolated_anon:0 active_file:4402672 inactive_file:483963 isolated_file:1344 unevictable:0 dirty:4886753 writeback:0 unstable:0 slab_reclaimable:148442 slab_unreclaimable:18741 mapped:1347 shmem:1347 pagetables:58669 bounce:0 free:88663 free_pcp:0 free_cma:0 ... 4) current memory state of all system tasks [ 516.079544] [ 744] 0 744 9211 1345 114688 82 0 systemd-journal [ 516.082034] [ 787] 0 787 31764 0 143360 92 0 lvmetad [ 516.084465] [ 792] 0 792 10930 1 110592 208 -1000 systemd-udevd [ 516.086865] [ 1199] 0 1199 13866 0 131072 112 -1000 auditd [ 516.089190] [ 1222] 0 1222 31990 1 110592 157 0 smartd [ 516.091477] [ 1225] 0 1225 4864 85 81920 43 0 irqbalance [ 516.093712] [ 1226] 0 1226 52612 0 258048 426 0 abrtd [ 516.112128] [ 1280] 0 1280 109774 55 299008 400 0 NetworkManager [ 516.113998] [ 1295] 0 1295 28817 37 69632 24 0 ksmtuned [ 516.144596] [ 10718] 0 10718 2622484 1721372 15998976 267219 0 panic [ 516.145792] [ 10719] 0 10719 2622484 1164767 9818112 53576 0 panic [ 516.146977] [ 10720] 0 10720 2622484 1174361 9904128 53709 0 panic [ 516.148163] [ 10721] 0 10721 2622484 1209070 10194944 54824 0 panic [ 516.149329] [ 10722] 0 10722 2622484 1745799 14774272 91138 0 panic 5) oom context (contrains and the chosen victim). oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0-1,task=panic,pid=10737,uid=0 An admin can easily get the full oom context at a single line which makes parsing much easier. Link: http://lkml.kernel.org/r/1542799799-36184-1-git-send-email-ufo19890607@gmail.com Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Yang Shi <yang.s@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexey Dobriyan
|
e5cb113f2d |
mm: make free_reserved_area() return "const char *"
and propagate through down the call stack. Link: http://lkml.kernel.org/r/20181124091411.GC10969@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexey Dobriyan
|
9a2f45ff32 |
mm/debug.c: make "migrate_reason_names[]" const char *
Those strings are immutable as well. Link: http://lkml.kernel.org/r/20181124090508.GB10877@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexey Dobriyan
|
c999fbd3dc |
mm/mmzone.c: make "migratetype_names" const char *
Those strings are immutable in fact. Link: http://lkml.kernel.org/r/20181124090327.GA10877@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
1c30844d2d |
mm: reclaim small amounts of memory when an external fragmentation event occurs
An external fragmentation event was previously described as
When the page allocator fragments memory, it records the event using
the mm_page_alloc_extfrag event. If the fallback_order is smaller
than a pageblock order (order-9 on 64-bit x86) then it's considered
an event that will cause external fragmentation issues in the future.
The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system. This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.
This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs. The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared. When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event. kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance. Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.
This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
4.20-rc3+patch1-4: 18421 (98% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%)
Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%)
Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel. The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
4.20-rc3+patch1-4: 13464 (95% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%)
Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%)
Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%)
Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%)
As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
4.20-rc3+patch1-4: 14263 (93% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%)
Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%)
There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.
2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch: 147463 (11% reduction)
4.20-rc3+patch1-4: 11095 (93% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%*
Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%)
There is a large reduction in fragmentation events with some jitter around
the latencies and success rates. As before, the high THP allocation
success rate does mean the system is under a lot of pressure. However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.
Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mel Gorman
|
0a79cdad5e |
mm: use alloc_flags to record if kswapd can wake
This is a preparation patch that copies the GFP flag __GFP_KSWAPD_RECLAIM into alloc_flags. This is a preparation patch only that avoids having to pass gfp_mask through a long callchain in a future patch. Note that the setting in the fast path happens in alloc_flags_nofragment() and it may be claimed that this has nothing to do with ALLOC_NO_FRAGMENT. That's true in this patch but is not true later so it's done now for easier review to show where the flag needs to be recorded. No functional change. [mgorman@techsingularity.net: ALLOC_KSWAPD flag needs to be applied in the !CONFIG_ZONE_DMA32 case] Link: http://lkml.kernel.org/r/20181126143503.GO23260@techsingularity.net Link: http://lkml.kernel.org/r/20181123114528.28802-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
a921444382 |
mm: move zone watermark accesses behind an accessor
This is a preparation patch only, no functional change. Link: http://lkml.kernel.org/r/20181123114528.28802-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
6bb154504f |
mm, page_alloc: spread allocations across zones before introducing fragmentation
Patch series "Fragmentation avoidance improvements", v5.
It has been noted before that fragmentation avoidance (aka
anti-fragmentation) is not perfect. Given sufficient time or an adverse
workload, memory gets fragmented and the long-term success of high-order
allocations degrades. This series defines an adverse workload, a definition
of external fragmentation events (including serious) ones and a series
that reduces the level of those fragmentation events.
The details of the workload and the consequences are described in more
detail in the changelogs. However, from patch 1, this is a high-level
summary of the adverse workload. The exact details are found in the
mmtests implementation.
The broad details of the workload are as follows;
1. Create an XFS filesystem (not specified in the configuration but done
as part of the testing for this patch)
2. Start 4 fio threads that write a number of 64K files inefficiently.
Inefficiently means that files are created on first access and not
created in advance (fio parameterr create_on_open=1) and fallocate
is not used (fallocate=none). With multiple IO issuers this creates
a mix of slab and page cache allocations over time. The total size
of the files is 150% physical memory so that the slabs and page cache
pages get mixed
3. Warm up a number of fio read-only threads accessing the same files
created in step 2. This part runs for the same length of time it
took to create the files. It'll fault back in old data and further
interleave slab and page cache allocations. As it's now low on
memory due to step 2, fragmentation occurs as pageblocks get
stolen.
4. While step 3 is still running, start a process that tries to allocate
75% of memory as huge pages with a number of threads. The number of
threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
threads contending with fio, any other threads or forcing cross-NUMA
scheduling. Note that the test has not been used on a machine with less
than 8 cores. The benchmark records whether huge pages were allocated
and what the fault latency was in microseconds
5. Measure the number of events potentially causing external fragmentation,
the fault latency and the huge page allocation success rate.
6. Cleanup
Overall the series reduces external fragmentation causing events by over 94%
on 1 and 2 socket machines, which in turn impacts high-order allocation
success rates over the long term. There are differences in latencies and
high-order allocation success rates. Latencies are a mixed bag as they
are vulnerable to exact system state and whether allocations succeeded
so they are treated as a secondary metric.
Patch 1 uses lower zones if they are populated and have free memory
instead of fragmenting a higher zone. It's special cased to
handle a Normal->DMA32 fallback with the reasons explained
in the changelog.
Patch 2-4 boosts watermarks temporarily when an external fragmentation
event occurs. kswapd wakes to reclaim a small amount of old memory
and then wakes kcompactd on completion to recover the system
slightly. This introduces some overhead in the slowpath. The level
of boosting can be tuned or disabled depending on the tolerance
for fragmentation vs allocation latency.
Patch 5 stalls some movable allocation requests to let kswapd from patch 4
make some progress. The duration of the stalls is very low but it
is possible to tune the system to avoid fragmentation events if
larger stalls can be tolerated.
The bulk of the improvement in fragmentation avoidance is from patches
1-4 but patch 5 can deal with a rare corner case and provides the option
of tuning a system for THP allocation success rates in exchange for
some stalls to control fragmentation.
This patch (of 5):
The page allocator zone lists are iterated based on the watermarks of each
zone which does not take anti-fragmentation into account. On x86, node 0
may have multiple zones while other nodes have one zone. A consequence is
that tasks running on node 0 may fragment ZONE_NORMAL even though
ZONE_DMA32 has plenty of free memory. This patch special cases the
allocator fast path such that it'll try an allocation from a lower local
zone before fragmenting a higher zone. In this case, stealing of
pageblocks or orders larger than a pageblock are still allowed in the fast
path as they are uninteresting from a fragmentation point of view.
This was evaluated using a benchmark designed to fragment memory before
attempting THP allocations. It's implemented in mmtests as the following
configurations
configs/config-global-dhp__workload_thpfioscale
configs/config-global-dhp__workload_thpfioscale-defrag
configs/config-global-dhp__workload_thpfioscale-madvhugepage
e.g. from mmtests
./run-mmtests.sh --run-monitor --config configs/config-global-dhp__workload_thpfioscale test-run-1
The broad details of the workload are as follows;
1. Create an XFS filesystem (not specified in the configuration but done
as part of the testing for this patch).
2. Start 4 fio threads that write a number of 64K files inefficiently.
Inefficiently means that files are created on first access and not
created in advance (fio parameter create_on_open=1) and fallocate
is not used (fallocate=none). With multiple IO issuers this creates
a mix of slab and page cache allocations over time. The total size
of the files is 150% physical memory so that the slabs and page cache
pages get mixed.
3. Warm up a number of fio read-only processes accessing the same files
created in step 2. This part runs for the same length of time it
took to create the files. It'll refault old data and further
interleave slab and page cache allocations. As it's now low on
memory due to step 2, fragmentation occurs as pageblocks get
stolen.
4. While step 3 is still running, start a process that tries to allocate
75% of memory as huge pages with a number of threads. The number of
threads is based on a (NR_CPUS_SOCKET - NR_FIO_THREADS)/4 to avoid THP
threads contending with fio, any other threads or forcing cross-NUMA
scheduling. Note that the test has not been used on a machine with less
than 8 cores. The benchmark records whether huge pages were allocated
and what the fault latency was in microseconds.
5. Measure the number of events potentially causing external fragmentation,
the fault latency and the huge page allocation success rate.
6. Cleanup the test files.
Note that due to the use of IO and page cache that this benchmark is not
suitable for running on large machines where the time to fragment memory
may be excessive. Also note that while this is one mix that generates
fragmentation that it's not the only mix that generates fragmentation.
Differences in workload that are more slab-intensive or whether SLUB is
used with high-order pages may yield different results.
When the page allocator fragments memory, it records the event using the
mm_page_alloc_extfrag ftrace event. If the fallback_order is smaller than
a pageblock order (order-9 on 64-bit x86) then it's considered to be an
"external fragmentation event" that may cause issues in the future.
Hence, the primary metric here is the number of external fragmentation
events that occur with order < 9. The secondary metric is allocation
latency and huge page allocation success rates but note that differences
in latencies and what the success rate also can affect the number of
external fragmentation event which is why it's a secondary metric.
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-1 662.92 ( 0.00%) 653.58 * 1.41%*
Amean fault-huge-1 0.00 ( 0.00%) 0.00 ( 0.00%)
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-1 0.00 ( 0.00%) 0.00 ( 0.00%)
Fault latencies are slightly reduced while allocation success rates remain
at zero as this configuration does not make any special effort to allocate
THP and fio is heavily active at the time and either filling memory or
keeping pages resident. However, a 49% reduction of serious fragmentation
events reduces the changes of external fragmentation being a problem in
the future.
Vlastimil asked during review for a breakdown of the allocation types
that are falling back.
vanilla
3816 MIGRATE_UNMOVABLE
800845 MIGRATE_MOVABLE
33 MIGRATE_UNRECLAIMABLE
patch
735 MIGRATE_UNMOVABLE
408135 MIGRATE_MOVABLE
42 MIGRATE_UNRECLAIMABLE
The majority of the fallbacks are due to movable allocations and this is
consistent for the workload throughout the series so will not be presented
again as the primary source of fallbacks are movable allocations.
Movable fallbacks are sometimes considered "ok" to fallback because they
can be migrated. The problem is that they can fill an
unmovable/reclaimable pageblock causing those allocations to fallback
later and polluting pageblocks with pages that cannot move. If there is a
movable fallback, it is pretty much guaranteed to affect an
unmovable/reclaimable pageblock and while it might not be enough to
actually cause a unmovable/reclaimable fallback in the future, we cannot
know that in advance so the patch takes the only option available to it.
Hence, it's important to control them. This point is also consistent
throughout the series and will not be repeated.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-1 1495.14 ( 0.00%) 1467.55 ( 1.85%)
Amean fault-huge-1 1098.48 ( 0.00%) 1127.11 ( -2.61%)
thpfioscale Percentage Faults Huge
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-1 78.57 ( 0.00%) 77.64 ( -1.18%)
Fragmentation events were reduced quite a bit although this is known
to be a little variable. The latencies and allocation success rates
are similar but they were already quite high.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Amean fault-base-5 1350.05 ( 0.00%) 1346.45 ( 0.27%)
Amean fault-huge-5 4181.01 ( 0.00%) 3418.60 ( 18.24%)
4.20.0-rc3 4.20.0-rc3
vanilla lowzone-v5r8
Percentage huge-5 1.15 ( 0.00%) 0.78 ( -31.88%)
The reduction of external fragmentation events is slight and this is
partially due to the removal of __GFP_THISNODE in commit
|
||
David Hildenbrand
|
f29d8e9c01 |
mm/memory_hotplug: drop "online" parameter from add_memory_resource()
Userspace should always be in charge of how to online memory and if memory should be onlined automatically in the kernel. Let's drop the parameter to overwrite this - XEN passes memhp_auto_online, just like add_memory(), so we can directly use that instead internally. Link: http://lkml.kernel.org/r/20181123123740.27652-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
4d72868c8f |
memblock: replace usage of __memblock_free_early() with memblock_free()
__memblock_free_early() is only used by the convenience wrappers, so essentially we wrap a call to memblock_free() twice. Replace calls of __memblock_free_early() with calls to memblock_free() and drop the former. Link: http://lkml.kernel.org/r/20181125102940.GE28634@rapoport-lnx Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wentao Wang <witallwang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Wentao Wang
|
d31cfe7bff |
mm/page_alloc.c: deduplicate __memblock_free_early() and memblock_free()
Link: http://lkml.kernel.org/r/C8ECE1B7A767434691FEEFA3A01765D72AFB8E78@MX203CL03.corp.emc.com Signed-off-by: Wentao Wang <witallwang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Aaron Lu
|
742aa7fb52 |
mm/page_alloc.c: use a single function to free page
There are multiple places of freeing a page, they all do the same things so a common function can be used to reduce code duplicate. It also avoids bug fixed in one function but left in another. Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.com Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pankaj gupta <pagupta@redhat.com> Cc: Pawel Staszewski <pstaszewski@itcare.pl> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Aaron Lu
|
65895b67ad |
mm/page_alloc.c: free order-0 pages through PCP in page_frag_free()
page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.
Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:
mlx5e_poll_tx_cq
|
--16.34%--napi_consume_skb
|
|--12.65%--__free_pages_ok
| |
| --11.86%--free_one_page
| |
| |--10.10%--queued_spin_lock_slowpath
| |
| --0.65%--_raw_spin_lock
|
|--1.55%--page_frag_free
|
--1.44%--skb_release_data
Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator. The lock contention happens during mlx5 DMA TX completion
cycle. And the page allocator cannot keep up at these speeds.[2]
I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]
The free path as pointed out by Jesper is:
skb_free_head()
-> skb_free_frag()
-> page_frag_free()
And the pages being freed on this path are order-0 pages.
Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.
With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone. Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.
[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: Pawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Dan Williams
|
02917e9f86 |
mm, hmm: mark hmm_devmem_{add, add_resource} EXPORT_SYMBOL_GPL
At Maintainer Summit, Greg brought up a topic I proposed around EXPORT_SYMBOL_GPL usage. The motivation was considerations for when EXPORT_SYMBOL_GPL is warranted and the criteria for taking the exceptional step of reclassifying an existing export. Specifically, I wanted to make the case that although the line is fuzzy and hard to specify in abstract terms, it is nonetheless clear that devm_memremap_pages() and HMM (Heterogeneous Memory Management) have crossed it. The devm_memremap_pages() facility should have been EXPORT_SYMBOL_GPL from the beginning, and HMM as a derivative of that functionality should have naturally picked up that designation as well. Contrary to typical rules, the HMM infrastructure was merged upstream with zero in-tree consumers. There was a promise at the time that those users would be merged "soon", but it has been over a year with no drivers arriving. While the Nouveau driver is about to belatedly make good on that promise it is clear that HMM was targeted first and foremost at an out-of-tree consumer. HMM is derived from devm_memremap_pages(), a facility Christoph and I spearheaded to support persistent memory. It combines a device lifetime model with a dynamically created 'struct page' / memmap array for any physical address range. It enables coordination and control of the many code paths in the kernel built to interact with memory via 'struct page' objects. With HMM the integration goes even deeper by allowing device drivers to hook and manipulate page fault and page free events. One interpretation of when EXPORT_SYMBOL is suitable is when it is exporting stable and generic leaf functionality. The devm_memremap_pages() facility continues to see expanding use cases, peer-to-peer DMA being the most recent, with no clear end date when it will stop attracting reworks and semantic changes. It is not suitable to export devm_memremap_pages() as a stable 3rd party driver API due to the fact that it is still changing and manipulates core behavior. Moreover, it is not in the best interest of the long term development of the core memory management subsystem to permit any external driver to effectively define its own system-wide memory management policies with no encouragement to engage with upstream. I am also concerned that HMM was designed in a way to minimize further engagement with the core-MM. That, with these hooks in place, device-drivers are free to implement their own policies without much consideration for whether and how the core-MM could grow to meet that need. Going forward not only should HMM be EXPORT_SYMBOL_GPL, but the core-MM should be allowed the opportunity and stimulus to change and address these new use cases as first class functionality. Original changelog: hmm_devmem_add(), and hmm_devmem_add_resource() duplicated devm_memremap_pages() and are now simple now wrappers around the core facility to inject a dev_pagemap instance into the global pgmap_radix and hook page-idle events. The devm_memremap_pages() interface is base infrastructure for HMM. HMM has more and deeper ties into the kernel memory management implementation than base ZONE_DEVICE which is itself a EXPORT_SYMBOL_GPL facility. Originally, the HMM page structure creation routines copied the devm_memremap_pages() code and reused ZONE_DEVICE. A cleanup to unify the implementations was discussed during the initial review: http://lkml.iu.edu/hypermail/linux/kernel/1701.2/00812.html Recent work to extend devm_memremap_pages() for the peer-to-peer-DMA facility enabled this cleanup to move forward. In addition to the integration with devm_memremap_pages() HMM depends on other GPL-only symbols: mmu_notifier_unregister_no_release percpu_ref region_intersects __class_create It goes further to consume / indirectly expose functionality that is not exported to any other driver: alloc_pages_vma walk_page_range HMM is derived from devm_memremap_pages(), and extends deep core-kernel fundamentals. Similar to devm_memremap_pages(), mark its entry points EXPORT_SYMBOL_GPL(). [logang@deltatee.com: PCI/P2PDMA: match interface changes to devm_memremap_pages()] Link: http://lkml.kernel.org/r/20181130225911.2900-1-logang@deltatee.com Link: http://lkml.kernel.org/r/154275560565.76910.15919297436557795278.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com>, Cc: Michal Hocko <mhocko@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dan Williams
|
bbecd94e6c |
mm, hmm: replace hmm_devmem_pages_create() with devm_memremap_pages()
Commit |
||
|
Dan Williams
|
58ef15b765 |
mm, hmm: use devm semantics for hmm_devmem_{add, remove}
devm semantics arrange for resources to be torn down when device-driver-probe fails or when device-driver-release completes. Similar to devm_memremap_pages() there is no need to support an explicit remove operation when the users properly adhere to devm semantics. Note that devm_kzalloc() automatically handles allocating node-local memory. Link: http://lkml.kernel.org/r/154275559545.76910.9186690723515469051.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Huang Shijie
|
7ead334215 |
mm/page_alloc.c: change the order of MIGRATE_RECLAIMABLE/MIGRATE_MOVABLE in fallbacks
In the enum migratetype definition, MIGRATE_MOVABLE is before MIGRATE_RECLAIMABLE. Change the order of them to match the enumeration's order. Link: http://lkml.kernel.org/r/20181121085821.3442-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Aaron Lu
|
66f71da9dd |
mm/swap: use nr_node_ids for avail_lists in swap_info_struct
Since
|
||
|
Wei Yang
|
8b09549c2b |
vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n
Commit
|
||
Arun KS
|
476567e873 |
mm: remove managed_page_count_lock spinlock
Now that totalram_pages and managed_pages are atomic varibles, no need of managed_page_count spinlock. The lock had really a weak consistency guarantee. It hasn't been used for anything but the update but no reader actually cares about all the values being updated to be in sync. Link: http://lkml.kernel.org/r/1542090790-21750-5-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arun KS
|
ca79b0c211 |
mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arun KS
|
9705bea5f8 |
mm: convert zone->managed_pages to atomic variable
totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. This patch converts zone->managed_pages. Subsequent patches will convert totalram_panges, totalhigh_pages and eventually managed_page_count_lock will be removed. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arun KS
|
3d6357de8a |
mm: reference totalram_pages and managed_pages once per function
Patch series "mm: convert totalram_pages, totalhigh_pages and managed pages to atomic", v5. This series converts totalram_pages, totalhigh_pages and zone->managed_pages to atomic variables. totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better to remove the lock and convert variables to atomic. With the change, preventing poteintial store-to-read tearing comes as a bonus. This patch (of 4): This is in preparation to a later patch which converts totalram_pages and zone->managed_pages to atomic variables. Please note that re-reading the value might lead to a different value and as such it could lead to unexpected behavior. There are no known bugs as a result of the current code but it is better to prevent from them in principle. Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
fecd4a50ba |
mm: remove reset of pcp->counter in pageset_init()
per_cpu_pageset is cleared by memset, it is not necessary to reset it again. Link: http://lkml.kernel.org/r/20181021023920.5501-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
46a3679b81 |
mm, memory_hotplug: do not clear numa_node association after hot_remove
Per-cpu numa_node provides a default node for each possible cpu. The
association gets initialized during the boot when the architecture
specific code explores cpu->NUMA affinity. When the whole NUMA node is
removed though we are clearing this association
try_offline_node
check_and_unmap_cpu_on_node
unmap_cpu_on_node
numa_clear_node
numa_set_node(cpu, NUMA_NO_NODE)
This means that whoever calls cpu_to_node for a cpu associated with such a
node will get NUMA_NO_NODE. This is problematic for two reasons. First
it is fragile because __alloc_pages_node would simply blow up on an
out-of-bound access. We have encountered this when loading kvm module
BUG: unable to handle kernel paging request at 00000000000021c0
IP: __alloc_pages_nodemask+0x93/0xb70
PGD 800000ffe853e067 PUD 7336bbc067 PMD 0
Oops: 0000 [#1] SMP
[...]
CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1
RIP: __alloc_pages_nodemask+0x93/0xb70
RSP: 0018:ffff887354493b40 EFLAGS: 00010202
RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0
RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000
R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101
R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000
FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
alloc_vmcs_cpu+0x3d/0x90 [kvm_intel]
hardware_setup+0x781/0x849 [kvm_intel]
kvm_arch_hardware_setup+0x28/0x190 [kvm]
kvm_init+0x7c/0x2d0 [kvm]
vmx_init+0x1e/0x32c [kvm_intel]
do_one_initcall+0xca/0x1f0
do_init_module+0x5a/0x1d7
load_module+0x1393/0x1c90
SYSC_finit_module+0x70/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xb7
DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7
on an older kernel but the code is basically the same in the current Linus
tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which would
recognize NUMA_NO_NODE and use alloc_pages_node which would translate it
to numa_mem_id but that is wrong as well because it would use a cpu
affinity of the local CPU which might be quite far from the original node.
It is also reasonable to expect that cpu_to_node will provide a sane
value and there might be many more callers like that.
The second problem is that __register_one_node relies on cpu_to_node to
properly associate cpus back to the node when it is onlined. We do not
want to lose that link as there is no arch independent way to get it from
the early boot time AFAICS.
Drop the whole check_and_unmap_cpu_on_node machinery and keep the
association to fix both issues. The NODE_DATA(nid) is not deallocated so
it will stay in place and if anybody wants to allocate from that node then
a fallback node will be used.
Thanks to Vlastimil Babka for his live system debugging skills that helped
debugging the issue.
Link: http://lkml.kernel.org/r/20181108100413.966-1-mhocko@kernel.org
Fixes:
|
||
Yangtao Li
|
9cabf929e7 |
mm/mmap.c: remove verify_mm_writelocked()
We should get rid of this function. It no longer serves its purpose. This is a historical artifact from 2005 where do_brk was called outside of the core mm. We do have a proper abstraction in vm_brk_flags and that one does the locking properly so there is no need to use this function. Link: http://lkml.kernel.org/r/20181108174856.10811-1-tiny.windzz@gmail.com Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Timofey Titovets
|
59e1a2f4bf |
ksm: replace jhash2 with xxhash
Replace jhash2 with xxhash. Perf numbers: Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz ksm: crc32c hash() 12081 MB/s ksm: xxh64 hash() 8770 MB/s ksm: xxh32 hash() 4529 MB/s ksm: jhash2 hash() 1569 MB/s Sioh Lee did some testing: crc32c_intel: 1084.10ns crc32c (no hardware acceleration): 7012.51ns xxhash32: 2227.75ns xxhash64: 1413.16ns jhash2: 5128.30ns As jhash2 always will be slower (for data size like PAGE_SIZE). Don't use it in ksm at all. Use only xxhash for now, because for using crc32c, cryptoapi must be initialized first - that requires some tricky solution to work well in all situations. Link: http://lkml.kernel.org/r/20181023182554.23464-3-nefelim4ag@gmail.com Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com> Signed-off-by: leesioh <solee@os.korea.ac.kr> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
d381c54760 |
mm: only report isolation failures when offlining memory
Heiko has complained that his log is swamped by warnings from has_unmovable_pages [ 20.536664] page dumped because: has_unmovable_pages [ 20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0 [ 20.536794] flags: 0x3fffe0000010200(slab|head) [ 20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600 [ 20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 [ 20.536797] page dumped because: has_unmovable_pages [ 20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 [ 20.536815] flags: 0x7fffe0000000000() [ 20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000 [ 20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 which are not triggered by the memory hotplug but rather CMA allocator. The original idea behind dumping the page state for all call paths was that these messages will be helpful debugging failures. From the above it seems that this is not the case for the CMA path because we are lacking much more context. E.g the second reported page might be a CMA allocated page. It is still interesting to see a slab page in the CMA area but it is hard to tell whether this is bug from the above output alone. Address this issue by dumping the page state only on request. Both start_isolate_page_range and has_unmovable_pages already have an argument to ignore hwpoison pages so make this argument more generic and turn it into flags and allow callers to combine non-default modes into a mask. While we are at it, has_unmovable_pages call from is_pageblock_removable_nolock (sysfs removable file) is questionable to report the failure so drop it from there as well. Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
2932c8b050 |
mm, memory_hotplug: be more verbose for memory offline failures
There is only very limited information printed when the memory offlining fails: [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff This tells us that the failure is triggered by the userspace intervention but it doesn't tell us much more about the underlying reason. It might be that the page migration failes repeatedly and the userspace timeout expires and send a signal or it might be some of the earlier steps (isolation, memory notifier) takes too long. If the migration failes then it would be really helpful to see which page that and its state. The same applies to the isolation phase. If we fail to isolate a page from the allocator then knowing the state of the page would be helpful as well. Dump the page state that fails to get isolated or migrated. This will tell us more about the failure and what to focus on during debugging. [akpm@linux-foundation.org: add missing printk arg] [mhocko@suse.com: tweak dump_page() `reason' text] Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
7960509329 |
mm, memory_hotplug: print reason for the offlining failure
The memory offlining failure reporting is inconsistent and insufficient. Some error paths simply do not report the failure to the log at all. When we do report there are no details about the reason of the failure and there are several of them which makes memory offlining failures hard to debug. Make sure that the memory offlining [mem %#010llx-%#010llx] failed message is printed for all failures and also provide a short textual reason for the failure e.g. [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff this tells us that the offlining has failed because of a signal pending aka user intervention. [akpm@linux-foundation.org: tweak messages a bit] Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
6cc2baf600 |
mm, memory_hotplug: drop pointless block alignment checks from __offline_pages
This function is never called from a context which would provide misaligned pfn range so drop the pointless check. Link: http://lkml.kernel.org/r/20181107101830.17405-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
e0392cf7c5 |
mm: lower the printk loglevel for __dump_page messages
__dump_page messages use KERN_EMERG resp. KERN_ALERT loglevel (this is the case since 2004). Most callers of this function are really detecting a critical page state and BUG right after. On the other hand the function is called also from contexts which just want to inform about the page state and those would rather not disrupt logs that much (e.g. some systems route these messages to the normal console). Reduce the loglevel to KERN_WARNING to make dump_page easier to reuse for other contexts while those messages will still make it to the kernel log in most setups. Even if the loglevel setup filters warnings away those paths that are really critical already print the more targeted error or panic and that should make it to the kernel log. [mhocko@kernel.org: fix __dump_page()] Link: http://lkml.kernel.org/r/20181212142540.GA7378@dhcp22.suse.cz [akpm@linux-foundation.org: s/KERN_WARN/KERN_WARNING/, per Michal] Link: http://lkml.kernel.org/r/20181107101830.17405-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
1c6fb1d89e |
mm: print more information about mapping in __dump_page
I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Gao Xiang
|
20ff1c9505 |
mm/readahead.c: simplify get_next_ra_size()
It's a trivial simplification for get_next_ra_size() and clear enough for humans to understand. It also fixes potential overflow if ra->size(< ra_pages) is too large. Link: http://lkml.kernel.org/r/1540707206-19649-1-git-send-email-hsiangkao@aol.com Signed-off-by: Gao Xiang <hsiangkao@aol.com> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sean Christopherson
|
6a90a83f1d |
mm/mmu_notifier.c: remove mmu_notifier_synchronize()
Contrary to its name, mmu_notifier_synchronize() does not synchronize the notifier's SRCU instance, but rather waits for RCU callbacks to finish. i.e. it invokes rcu_barrier(). The RCU documentation is quite clear on this matter, explicitly calling out that rcu_barrier() does not imply synchronize_rcu(). As there are no callers of mmu_notifier_synchronize() and it's unclear whether any user of mmu_notifier_call_srcu() will ever want to barrier on their callbacks, simply remove the function. Link: http://lkml.kernel.org/r/20181106134705.14197-1-sean.j.christopherson@intel.com Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Balbir Singh
|
5eb570a8d9 |
mm/hotplug: optimize clear_hwpoisoned_pages()
In hot remove, we try to clear poisoned pages, but a small optimization to check if num_poisoned_pages is 0 helps remove the iteration through nr_pages. [akpm@linux-foundation.org: tweak comment text] Link: http://lkml.kernel.org/r/20181102120001.4526-1-bsingharora@gmail.com Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Miles Chen
|
c8f61cfc87 |
mm/page_owner: clamp read count to PAGE_SIZE
The (root-only) page owner read might allocate a large size of memory with a large read count. Allocation fails can easily occur when doing high order allocations. Clamp buffer size to PAGE_SIZE to avoid arbitrary size allocation and avoid allocation fails due to high order allocation. [akpm@linux-foundation.org: use min_t()] Link: http://lkml.kernel.org/r/1541091607-27402-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
88349a2837 |
mm/slub.c: record final state of slub action in deactivate_slab()
If __cmpxchg_double_slab() fails and (l != m), current code records transition states of slub action. Update the action after __cmpxchg_double_slab() success to record the final state. [akpm@linux-foundation.org: more whitespace cleanup] Link: http://lkml.kernel.org/r/20181107013119.3816-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
6159d0f5c0 |
mm/slub.c: page is always non-NULL in node_match()
node_match() is a static function and is only invoked in slub.c. In all three places, `page' is ensured to be valid. Link: http://lkml.kernel.org/r/20181106150245.1668-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
1265ef2de4 |
mm/slub.c: remove validation on cpu_slab in __flush_cpu_slab()
cpu_slab is a per cpu variable which is allocated in all or none. If a cpu_slab failed to be allocated, the slub is not usable. We could use cpu_slab without validation in __flush_cpu_slab(). Link: http://lkml.kernel.org/r/20181103141218.22844-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yangtao Li
|
221d7da66c |
mm, slab: remove unnecessary unlikely()
WARN_ON() already contains an unlikely(), so it's not necessary to use unlikely. Also change WARN_ON() back to WARN_ON_ONCE() to avoid potentially spamming dmesg with user-triggerable large allocations. [akpm@linux-foundation.org: s/WARN_ON/WARN_ON_ONCE/, per Vlastimil] Link: http://lkml.kernel.org/r/20181104125028.3572-1-tiny.windzz@gmail.com Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrey Konovalov
|
e886bf9d9a |
kasan: add SPDX-License-Identifier mark to source files
This patch adds a "SPDX-License-Identifier: GPL-2.0" mark to all source files under mm/kasan. Link: http://lkml.kernel.org/r/bce2d1e618afa5142e81961ab8fa4b4165337380.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
66afc7f1e0 |
kasan: add __must_check annotations to kasan hooks
This patch adds __must_check annotations to kasan hooks that return a pointer to make sure that a tagged pointer always gets propagated. Link: http://lkml.kernel.org/r/03b269c5e453945f724bfca3159d4e1333a8fb1c.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
2813b9c029 |
kasan, mm, arm64: tag non slab memory allocated via pagealloc
Tag-based KASAN doesn't check memory accesses through pointers tagged with 0xff. When page_address is used to get pointer to memory that corresponds to some page, the tag of the resulting pointer gets set to 0xff, even though the allocated memory might have been tagged differently. For slab pages it's impossible to recover the correct tag to return from page_address, since the page might contain multiple slab objects tagged with different values, and we can't know in advance which one of them is going to get accessed. For non slab pages however, we can recover the tag in page_address, since the whole page was marked with the same tag. This patch adds tagging to non slab memory allocated with pagealloc. To set the tag of the pointer returned from page_address, the tag gets stored to page->flags when the memory gets allocated. Link: http://lkml.kernel.org/r/d758ddcef46a5abc9970182b9137e2fbee202a2c.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
7f94ffbc4c |
kasan: add hooks implementation for tag-based mode
This commit adds tag-based KASAN specific hooks implementation and adjusts common generic and tag-based KASAN ones. 1. When a new slab cache is created, tag-based KASAN rounds up the size of the objects in this cache to KASAN_SHADOW_SCALE_SIZE (== 16). 2. On each kmalloc tag-based KASAN generates a random tag, sets the shadow memory, that corresponds to this object to this tag, and embeds this tag value into the top byte of the returned pointer. 3. On each kfree tag-based KASAN poisons the shadow memory with a random tag to allow detection of use-after-free bugs. The rest of the logic of the hook implementation is very much similar to the one provided by generic KASAN. Tag-based KASAN saves allocation and free stack metadata to the slab object the same way generic KASAN does. Link: http://lkml.kernel.org/r/bda78069e3b8422039794050ddcb2d53d053ed41.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
5b7c414822 |
mm: move obj_to_index to include/linux/slab_def.h
While with SLUB we can actually preassign tags for caches with contructors and store them in pointers in the freelist, SLAB doesn't allow that since the freelist is stored as an array of indexes, so there are no pointers to store the tags. Instead we compute the tag twice, once when a slab is created before calling the constructor and then again each time when an object is allocated with kmalloc. Tag is computed simply by taking the lowest byte of the index that corresponds to the object. However in kasan_kmalloc we only have access to the objects pointer, so we need a way to find out which index this object corresponds to. This patch moves obj_to_index from slab.c to include/linux/slab_def.h to be reused by KASAN. Link: http://lkml.kernel.org/r/c02cd9e574cfd93858e43ac94b05e38f891fef64.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
121e8f81d3 |
kasan: add bug reporting routines for tag-based mode
This commit adds rountines, that print tag-based KASAN error reports. Those are quite similar to generic KASAN, the difference is: 1. The way tag-based KASAN finds the first bad shadow cell (with a mismatching tag). Tag-based KASAN compares memory tags from the shadow memory to the pointer tag. 2. Tag-based KASAN reports all bugs with the "KASAN: invalid-access" header. Also simplify generic KASAN find_first_bad_addr. Link: http://lkml.kernel.org/r/aee6897b1bd077732a315fd84c6b4f234dbfdfcb.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
11cd3cd69a |
kasan: split out generic_report.c from report.c
Move generic KASAN specific error reporting routines to generic_report.c without any functional changes, leaving common error reporting code in report.c to be later reused by tag-based KASAN. Link: http://lkml.kernel.org/r/ba48c32f8e5aefedee78998ccff0413bee9e0f5b.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
772a2fa50f |
kasan, mm: perform untagged pointers comparison in krealloc
The krealloc function checks where the same buffer was reused or a new one allocated by comparing kernel pointers. Tag-based KASAN changes memory tag on the krealloc'ed chunk of memory and therefore also changes the pointer tag of the returned pointer. Therefore we need to perform comparison on untagged (with tags reset) pointers to check whether it's the same memory region or not. Link: http://lkml.kernel.org/r/14f6190d7846186a3506cd66d82446646fe65090.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
4d176711ea |
kasan: preassign tags to objects with ctors or SLAB_TYPESAFE_BY_RCU
An object constructor can initialize pointers within this objects based on the address of the object. Since the object address might be tagged, we need to assign a tag before calling constructor. The implemented approach is to assign tags to objects with constructors when a slab is allocated and call constructors once as usual. The downside is that such object would always have the same tag when it is reallocated, so we won't catch use-after-frees on it. Also pressign tags for objects from SLAB_TYPESAFE_BY_RCU caches, since they can be validy accessed after having been freed. Link: http://lkml.kernel.org/r/f158a8a74a031d66f0a9398a5b0ed453c37ba09a.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
3c9e3aa110 |
kasan: add tag related helper functions
This commit adds a few helper functions, that are meant to be used to work with tags embedded in the top byte of kernel pointers: to set, to get or to reset the top byte. Link: http://lkml.kernel.org/r/f6c6437bb8e143bc44f42c3c259c62e734be7935.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
080eb83f54 |
kasan: initialize shadow to 0xff for tag-based mode
A tag-based KASAN shadow memory cell contains a memory tag, that corresponds to the tag in the top byte of the pointer, that points to that memory. The native top byte value of kernel pointers is 0xff, so with tag-based KASAN we need to initialize shadow memory to 0xff. [cai@lca.pw: arm64: skip kmemleak for KASAN again\ Link: http://lkml.kernel.org/r/20181226020550.63712-1-cai@lca.pw Link: http://lkml.kernel.org/r/5cc1b789aad7c99cf4f3ec5b328b147ad53edb40.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
9577dd7486 |
kasan: rename kasan_zero_page to kasan_early_shadow_page
With tag based KASAN mode the early shadow value is 0xff and not 0x00, so this patch renames kasan_zero_(page|pte|pmd|pud|p4d) to kasan_early_shadow_(page|pte|pmd|pud|p4d) to avoid confusion. Link: http://lkml.kernel.org/r/3fed313280ebf4f88645f5b89ccbc066d320e177.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
2bd926b439 |
kasan: add CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS
This commit splits the current CONFIG_KASAN config option into two: 1. CONFIG_KASAN_GENERIC, that enables the generic KASAN mode (the one that exists now); 2. CONFIG_KASAN_SW_TAGS, that enables the software tag-based KASAN mode. The name CONFIG_KASAN_SW_TAGS is chosen as in the future we will have another hardware tag-based KASAN mode, that will rely on hardware memory tagging support in arm64. With CONFIG_KASAN_SW_TAGS enabled, compiler options are changed to instrument kernel files with -fsantize=kernel-hwaddress (except the ones for which KASAN_SANITIZE := n is set). Both CONFIG_KASAN_GENERIC and CONFIG_KASAN_SW_TAGS support both CONFIG_KASAN_INLINE and CONFIG_KASAN_OUTLINE instrumentation modes. This commit also adds empty placeholder (for now) implementation of tag-based KASAN specific hooks inserted by the compiler and adjusts common hooks implementation. While this commit adds the CONFIG_KASAN_SW_TAGS config option, this option is not selectable, as it depends on HAVE_ARCH_KASAN_SW_TAGS, which we will enable once all the infrastracture code has been added. Link: http://lkml.kernel.org/r/b2550106eb8a68b10fefbabce820910b115aa853.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
b938fcf427 |
kasan: rename source files to reflect the new naming scheme
We now have two KASAN modes: generic KASAN and tag-based KASAN. Rename kasan.c to generic.c to reflect that. Also rename kasan_init.c to init.c as it contains initialization code for both KASAN modes. Link: http://lkml.kernel.org/r/88c6fd2a883e459e6242030497230e5fb0d44d44.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
bffa986c6f |
kasan: move common generic and tag-based code to common.c
Tag-based KASAN reuses a significant part of the generic KASAN code, so move the common parts to common.c without any functional changes. Link: http://lkml.kernel.org/r/114064d002356e03bb8cc91f7835e20dc61b51d9.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
12b2238699 |
kasan, slub: handle pointer tags in early_kmem_cache_node_alloc
The previous patch updated KASAN hooks signatures and their usage in SLAB and SLUB code, except for the early_kmem_cache_node_alloc function. This patch handles that function separately, as it requires to reorder some of the initialization code to correctly propagate a tagged pointer in case a tag is assigned by kasan_kmalloc. Link: http://lkml.kernel.org/r/fc8d0fdcf733a7a52e8d0daaa650f4736a57de8c.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
0116523cff |
kasan, mm: change hooks signatures
Patch series "kasan: add software tag-based mode for arm64", v13. This patchset adds a new software tag-based mode to KASAN [1]. (Initially this mode was called KHWASAN, but it got renamed, see the naming rationale at the end of this section). The plan is to implement HWASan [2] for the kernel with the incentive, that it's going to have comparable to KASAN performance, but in the same time consume much less memory, trading that off for somewhat imprecise bug detection and being supported only for arm64. The underlying ideas of the approach used by software tag-based KASAN are: 1. By using the Top Byte Ignore (TBI) arm64 CPU feature, we can store pointer tags in the top byte of each kernel pointer. 2. Using shadow memory, we can store memory tags for each chunk of kernel memory. 3. On each memory allocation, we can generate a random tag, embed it into the returned pointer and set the memory tags that correspond to this chunk of memory to the same value. 4. By using compiler instrumentation, before each memory access we can add a check that the pointer tag matches the tag of the memory that is being accessed. 5. On a tag mismatch we report an error. With this patchset the existing KASAN mode gets renamed to generic KASAN, with the word "generic" meaning that the implementation can be supported by any architecture as it is purely software. The new mode this patchset adds is called software tag-based KASAN. The word "tag-based" refers to the fact that this mode uses tags embedded into the top byte of kernel pointers and the TBI arm64 CPU feature that allows to dereference such pointers. The word "software" here means that shadow memory manipulation and tag checking on pointer dereference is done in software. As it is the only tag-based implementation right now, "software tag-based" KASAN is sometimes referred to as simply "tag-based" in this patchset. A potential expansion of this mode is a hardware tag-based mode, which would use hardware memory tagging support (announced by Arm [3]) instead of compiler instrumentation and manual shadow memory manipulation. Same as generic KASAN, software tag-based KASAN is strictly a debugging feature. [1] https://www.kernel.org/doc/html/latest/dev-tools/kasan.html [2] http://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html [3] https://community.arm.com/processors/b/blog/posts/arm-a-profile-architecture-2018-developments-armv85a ====== Rationale On mobile devices generic KASAN's memory usage is significant problem. One of the main reasons to have tag-based KASAN is to be able to perform a similar set of checks as the generic one does, but with lower memory requirements. Comment from Vishwath Mohan <vishwath@google.com>: I don't have data on-hand, but anecdotally both ASAN and KASAN have proven problematic to enable for environments that don't tolerate the increased memory pressure well. This includes (a) Low-memory form factors - Wear, TV, Things, lower-tier phones like Go, (c) Connected components like Pixel's visual core [1]. These are both places I'd love to have a low(er) memory footprint option at my disposal. Comment from Evgenii Stepanov <eugenis@google.com>: Looking at a live Android device under load, slab (according to /proc/meminfo) + kernel stack take 8-10% available RAM (~350MB). KASAN's overhead of 2x - 3x on top of it is not insignificant. Not having this overhead enables near-production use - ex. running KASAN/KHWASAN kernel on a personal, daily-use device to catch bugs that do not reproduce in test configuration. These are the ones that often cost the most engineering time to track down. CPU overhead is bad, but generally tolerable. RAM is critical, in our experience. Once it gets low enough, OOM-killer makes your life miserable. [1] https://www.blog.google/products/pixel/pixel-visual-core-image-processing-and-machine-learning-pixel-2/ ====== Technical details Software tag-based KASAN mode is implemented in a very similar way to the generic one. This patchset essentially does the following: 1. TCR_TBI1 is set to enable Top Byte Ignore. 2. Shadow memory is used (with a different scale, 1:16, so each shadow byte corresponds to 16 bytes of kernel memory) to store memory tags. 3. All slab objects are aligned to shadow scale, which is 16 bytes. 4. All pointers returned from the slab allocator are tagged with a random tag and the corresponding shadow memory is poisoned with the same value. 5. Compiler instrumentation is used to insert tag checks. Either by calling callbacks or by inlining them (CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE flags are reused). 6. When a tag mismatch is detected in callback instrumentation mode KASAN simply prints a bug report. In case of inline instrumentation, clang inserts a brk instruction, and KASAN has it's own brk handler, which reports the bug. 7. The memory in between slab objects is marked with a reserved tag, and acts as a redzone. 8. When a slab object is freed it's marked with a reserved tag. Bug detection is imprecise for two reasons: 1. We won't catch some small out-of-bounds accesses, that fall into the same shadow cell, as the last byte of a slab object. 2. We only have 1 byte to store tags, which means we have a 1/256 probability of a tag match for an incorrect access (actually even slightly less due to reserved tag values). Despite that there's a particular type of bugs that tag-based KASAN can detect compared to generic KASAN: use-after-free after the object has been allocated by someone else. ====== Testing Some kernel developers voiced a concern that changing the top byte of kernel pointers may lead to subtle bugs that are difficult to discover. To address this concern deliberate testing has been performed. It doesn't seem feasible to do some kind of static checking to find potential issues with pointer tagging, so a dynamic approach was taken. All pointer comparisons/subtractions have been instrumented in an LLVM compiler pass and a kernel module that would print a bug report whenever two pointers with different tags are being compared/subtracted (ignoring comparisons with NULL pointers and with pointers obtained by casting an error code to a pointer type) has been used. Then the kernel has been booted in QEMU and on an Odroid C2 board and syzkaller has been run. This yielded the following results. The two places that look interesting are: is_vmalloc_addr in include/linux/mm.h is_kernel_rodata in mm/util.c Here we compare a pointer with some fixed untagged values to make sure that the pointer lies in a particular part of the kernel address space. Since tag-based KASAN doesn't add tags to pointers that belong to rodata or vmalloc regions, this should work as is. To make sure debug checks to those two functions that check that the result doesn't change whether we operate on pointers with or without untagging has been added. A few other cases that don't look that interesting: Comparing pointers to achieve unique sorting order of pointee objects (e.g. sorting locks addresses before performing a double lock): tty_ldisc_lock_pair_timeout in drivers/tty/tty_ldisc.c pipe_double_lock in fs/pipe.c unix_state_double_lock in net/unix/af_unix.c lock_two_nondirectories in fs/inode.c mutex_lock_double in kernel/events/core.c ep_cmp_ffd in fs/eventpoll.c fsnotify_compare_groups fs/notify/mark.c Nothing needs to be done here, since the tags embedded into pointers don't change, so the sorting order would still be unique. Checks that a pointer belongs to some particular allocation: is_sibling_entry in lib/radix-tree.c object_is_on_stack in include/linux/sched/task_stack.h Nothing needs to be done here either, since two pointers can only belong to the same allocation if they have the same tag. Overall, since the kernel boots and works, there are no critical bugs. As for the rest, the traditional kernel testing way (use until fails) is the only one that looks feasible. Another point here is that tag-based KASAN is available under a separate config option that needs to be deliberately enabled. Even though it might be used in a "near-production" environment to find bugs that are not found during fuzzing or running tests, it is still a debug tool. ====== Benchmarks The following numbers were collected on Odroid C2 board. Both generic and tag-based KASAN were used in inline instrumentation mode. Boot time [1]: * ~1.7 sec for clean kernel * ~5.0 sec for generic KASAN * ~5.0 sec for tag-based KASAN Network performance [2]: * 8.33 Gbits/sec for clean kernel * 3.17 Gbits/sec for generic KASAN * 2.85 Gbits/sec for tag-based KASAN Slab memory usage after boot [3]: * ~40 kb for clean kernel * ~105 kb (~260% overhead) for generic KASAN * ~47 kb (~20% overhead) for tag-based KASAN KASAN memory overhead consists of three main parts: 1. Increased slab memory usage due to redzones. 2. Shadow memory (the whole reserved once during boot). 3. Quaratine (grows gradually until some preset limit; the more the limit, the more the chance to detect a use-after-free). Comparing tag-based vs generic KASAN for each of these points: 1. 20% vs 260% overhead. 2. 1/16th vs 1/8th of physical memory. 3. Tag-based KASAN doesn't require quarantine. [1] Time before the ext4 driver is initialized. [2] Measured as `iperf -s & iperf -c 127.0.0.1 -t 30`. [3] Measured as `cat /proc/meminfo | grep Slab`. ====== Some notes A few notes: 1. The patchset can be found here: https://github.com/xairy/kasan-prototype/tree/khwasan 2. Building requires a recent Clang version (7.0.0 or later). 3. Stack instrumentation is not supported yet and will be added later. This patch (of 25): Tag-based KASAN changes the value of the top byte of pointers returned from the kernel allocation functions (such as kmalloc). This patch updates KASAN hooks signatures and their usage in SLAB and SLUB code to reflect that. Link: http://lkml.kernel.org/r/aec2b5e3973781ff8a6bb6760f8543643202c451.1544099024.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
792bf4d871 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
|
||
|
Linus Torvalds
|
5694cecdb0 |
arm64 festive updates for 4.21
In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0 lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8= =sYdt -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 festive updates from Will Deacon: "In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits) arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset() arm64: sysreg: Use _BITUL() when defining register bits arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4 arm64: docs: document pointer authentication arm64: ptr auth: Move per-thread keys from thread_info to thread_struct arm64: enable pointer authentication arm64: add prctl control for resetting ptrauth keys arm64: perf: strip PAC when unwinding userspace arm64: expose user PAC bit positions via ptrace arm64: add basic pointer authentication support arm64/cpufeature: detect pointer authentication arm64: Don't trap host pointer auth use to EL2 arm64/kvm: hide ptrauth from guests arm64/kvm: consistently handle host HCR_EL2 flags arm64: add pointer authentication register bits arm64: add comments about EC exception levels arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field arm64: enable per-task stack canaries ... |
||
|
Linus Torvalds
|
4971f090aa |
drm pull request for 4.21-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcExwOAAoJEAx081l5xIa+euIP/1NZZvSB+bsCtOwDG8I6uWsS OU5JUZ8q2dqyyFagRxzlkeSt3uWJqKp5NyNwuc9z/5u6AGF+3/97D0J1lG6Os/st 4abF6NadivYJ4cXhJ1ddIHOFMVDcAsyMWNDb93NwPwncCsQ0jt5FFOsrCyj6BGY+ ihHFlHrIyDrbBGDHz+u1E/EO5WkNnaLDoC+/k2fTRWCNI3bQL3O+orsYTI6S2uvU lQJnRfYAllgLD2p1k/rrBHcHXBv50roR0e8uhGmbdhGdp5bEW30UGBLHXxQjjSVy fQCwFwTO8X6zoxU53Zbbk+MVrp+jkTHcGKViHRuLkaHzE5mX26UXDwlXdN32ZUbK yHOJp+uDaWXX7MIz0LsB9Iqj2+eIUoFaIJMoZTMGVTNvqnTxKnoHnjAtbTH2u258 teFgmy4BIgPgo2kwEnBEZjCapou0Eivyut2wq8bTAB2Fe8LwURJpr3cioTtMLlUO L5/PoD27eFvBCAeFrQIwF3b2XiQEnBpXocmilEwP1xDMPgoyeePAfIF2iEpDvi0U jce3rLd2yVvo92xYUgoHkVTD8si/pKKnZ1D0U3+RI6pxK6s0HJEHjcNEMdvdm+2S 4qgvBQV3wlWFkXEK8PR5BHPoLntg18tKon/BTLBjgGkN9E1o9fWs1/s6KQGY4xdo l3Vvfx2LTdkgEoBssSwB =wh4W -----END PGP SIGNATURE----- Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ... |
||
|
Oscar Salvador
|
17e2e7d7e1 |
mm, page_alloc: fix has_unmovable_pages for HugePages
While playing with gigantic hugepages and memory_hotplug, I triggered the following #PF when "cat memoryX/removable": BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1481 Comm: cat Tainted: G E 4.20.0-rc6-mm1-1-default+ #18 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:has_unmovable_pages+0x154/0x210 Call Trace: is_mem_section_removable+0x7d/0x100 removable_show+0x90/0xb0 dev_attr_show+0x1c/0x50 sysfs_kf_seq_show+0xca/0x1b0 seq_read+0x133/0x380 __vfs_read+0x26/0x180 vfs_read+0x89/0x140 ksys_read+0x42/0x90 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The reason is we do not pass the Head to page_hstate(), and so, the call to compound_order() in page_hstate() returns 0, so we end up checking all hstates's size to match PAGE_SIZE. Obviously, we do not find any hstate matching that size, and we return NULL. Then, we dereference that NULL pointer in hugepage_migration_supported() and we got the #PF from above. Fix that by getting the head page before calling page_hstate(). Also, since gigantic pages span several pageblocks, re-adjust the logic for skipping pages. While are it, we can also get rid of the round_up(). [osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal] Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Peter Xu
|
2e83ee1d86 |
mm: thp: fix flags for pmd migration when split
When splitting a huge migrating PMD, we'll transfer all the existing PMD bits and apply them again onto the small PTEs. However we are fetching the bits unconditionally via pmd_soft_dirty(), pmd_write() or pmd_yound() while actually they don't make sense at all when it's a migration entry. Fix them up. Since at it, drop the ifdef together as not needed. Note that if my understanding is correct about the problem then if without the patch there is chance to lose some of the dirty bits in the migrating pmd pages (on x86_64 we're fetching bit 11 which is part of swap offset instead of bit 2) and it could potentially corrupt the memory of an userspace program which depends on the dirty bit. Link: http://lkml.kernel.org/r/20181213051510.20306-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mikhail Zaslonko
|
2830bf6f05 |
mm, memory_hotplug: initialize struct pages for the full memory section
If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct page access from is_mem_section_removable() or test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers: Here are the the panic examples: CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: ( test_pages_in_a_zone+0xde/0x160) show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops kernel parameter mem=3075M -------------------------- page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: ( is_mem_section_removable+0xb4/0x190) show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops Fix the problem by initializing the last memory section of each zone in memmap_init_zone() till the very end, even if it goes beyond the zone end. Michal said: : This has alwways been problem AFAIU. It just went unnoticed because we : have zeroed memmaps during allocation before |
||
|
Mike Rapoport
|
f496990f1f |
slab: make kmem_cache_create{_usercopy} description proper kernel-doc
Add the description for kmem_cache_create, fixup the return value paragraph and make both kmem_cache_create and add the second '*' to the comment opening. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Dennis Zhou
|
6ab7d47bcb |
percpu: convert spin_lock_irq to spin_lock_irqsave.
From Michael Cree: "Bisection lead to commit |
||
Yongkai Wu
|
8ace22bce8 |
hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
A stack trace was triggered by VM_BUG_ON_PAGE(page_mapcount(page), page) in free_huge_page(). Unfortunately, the page->mapping field was set to NULL before this test. This made it more difficult to determine the root cause of the problem. Move the VM_BUG_ON_PAGE tests earlier in the function so that if they do trigger more information is present in the page struct. Link: http://lkml.kernel.org/r/1543491843-23438-1-git-send-email-nic_w@163.com Signed-off-by: Yongkai Wu <nic_w@163.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yueyi Li
|
f5a222dc2f |
memblock: annotate memblock_is_reserved() with __init_memblock
Found warning: WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned. WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved() The function valid_phys_addr_range() references the function __init memblock_is_reserved(). This is often because valid_phys_addr_range lacks a __init annotation or the annotation of memblock_is_reserved is wrong. Use __init_memblock instead of __init. Link: http://lkml.kernel.org/r/BLUPR13MB02893411BF12EACB61888E80DFAE0@BLUPR13MB0289.namprd13.prod.outlook.com Signed-off-by: Yueyi Li <liyueyi@live.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Logan Gunthorpe
|
9def36e0fa |
mm/sparse: add common helper to mark all memblocks present
Presently the arches arm64, arm and sh have a function which loops through each memblock and calls memory present. riscv will require a similar function. Introduce a common memblocks_present() function that can be used by all the arches. Subsequent patches will cleanup the arches that make use of this. Link: http://lkml.kernel.org/r/20181107205433.3875-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
880b9df1bf |
XArray updates for 4.20-rc7
Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlwS8ZUUHHdpbGx5QGlu ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5h0wf9Fmc3z3WjmX05he+XKhGq1jQuHYVi zt8Eggsc7ns1hX8xPdwSw240CDOCBcbXxCyNL9KFCqlIkfxTAe8pYgoTDKuXhVAK U7VTCHCxJpsYzfhkEke5DaASGb/YP1kmvoTJs7qCfhBuI9ERXLVK6cESJNDZhlMA /d7VfRwRiqSLnK13AXPZAA9Pnw2GtAolMDU9CC9nOtMRlRDVwsQiwYiQ/mBRYK00 u0LoruwBJ7XAoe7Bo1CFmkvJuIV794cmhqkEY2cY85e9aoj15+BDqOu1la8DTaOl e7+7PwK1I6Ed6DfPixGleUP7BYHHXCfb/RVEYn22qGC/YHUQRtpbwrY37Q== =b+pK -----END PGP SIGNATURE----- Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup |
||
Steve Capper
|
f6795053da |
mm: mmap: Allow for "high" userspace addresses
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).
Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of arch_get_unmapped_* functions. However,
on arm64 we use the generic versions of these functions.
Rather than duplicate the generic arch_get_unmapped_* implementations
for arm64, this patch instead introduces two architectural helper macros
and applies them to arch_get_unmapped_*:
arch_get_mmap_end(addr) - get mmap upper limit depending on addr hint
arch_get_mmap_base(addr, base) - get mmap_base depending on addr hint
If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
||
Jens Axboe
|
96f774106e |
Linux 4.20-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwNpb0eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGwH/00UHnXfxww3ixxz zwTVDzptA6SPm6s84yJOWatM5fXhPiAltZaHSYF9lzRzNU71NCq7Frhq3fQUIXKM OxqDn9nfSTWcjWTk2q5n2keyRV/KIn67YX7UgqFc1bO/mqtVjEgNWaMyblhI+e9E giu1ZXayHr43jK1cDOmGExZubXUq7Vsc9TOlrd+d2SwIqeEP7TCMrPhnHDwCNvX2 UU5dtANpVzGtHaBcr37wJj+L8kODCc0f+PQ3g2ar5jTHst5SLlHp2u0AMRnUmgdi VkGx+mu/uk8mtwUqMIMqhplklVoqK6LTeLqsY5Xt32SKruw9UqyJGdphLjW2QP/g MkmA1lI= =7kaD -----END PGP SIGNATURE----- Merge tag 'v4.20-rc6' into for-4.21/block Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the two corruption fixes. We're going to be overhauling the direct dispatch path, and we need to do that on top of the changes we made for that in mainline. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
fa82dcbf2a |
dax fixes 4.20-rc6
* Fix the Xarray conversion of fsdax to properly handle
dax_lock_mapping_entry() in the presense of pmd entries.
* Fix inode destruction racing a new lock request.
-----BEGIN PGP SIGNATURE-----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=kUil
-----END PGP SIGNATURE-----
Merge tag 'dax-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"The last of the known regression fixes and fallout from the Xarray
conversion of the filesystem-dax implementation.
On the path to debugging why the dax memory-failure injection test
started failing after the Xarray conversion a couple more fixes for
the dax_lock_mapping_entry(), now called dax_lock_page(), surfaced.
Those plus the bug that started the hunt are now addressed. These
patches have appeared in a -next release with no issues reported.
Note the touches to mm/memory-failure.c are just the conversion to the
new function signature for dax_lock_page().
Summary:
- Fix the Xarray conversion of fsdax to properly handle
dax_lock_mapping_entry() in the presense of pmd entries
- Fix inode destruction racing a new lock request"
* tag 'dax-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix unlock mismatch with updated API
dax: Don't access a freed inode
dax: Check page->mapping isn't NULL
|
||
David Rientjes
|
356ff8a9a7 |
Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"
This reverts commit |
||
|
Dennis Zhou
|
6a7f6d86a5 |
blkcg: associate a blkg for pages being evicted by swap
A prior patch in this series added blkg association to bios issued by cgroups. There are two other paths that we want to attribute work back to the appropriate cgroup: swap and writeback. Here we modify the way swap tags bios to include the blkg. Writeback will be tackle in the next patch. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Matthew Wilcox
|
55f3f7eab7 |
XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh
These convenience wrappers match the other _irq and _bh wrappers we already have. It turns out I'd already open-coded xa_cmpxchg_irq() in the shmem code, so convert that. Signed-off-by: Matthew Wilcox <willy@infradead.org> |
||
|
David Rientjes
|
2f0799a0ff |
mm, thp: restore node-local hugepage allocations
This is a full revert of |
||
|
Matthew Wilcox
|
27359fd6e5 |
dax: Fix unlock mismatch with updated API
Internal to dax_unlock_mapping_entry(), dax_unlock_entry() is used to
store a replacement entry in the Xarray at the given xas-index with the
DAX_LOCKED bit clear. When called, dax_unlock_entry() expects the unlocked
value of the entry relative to the current Xarray state to be specified.
In most contexts dax_unlock_entry() is operating in the same scope as
the matched dax_lock_entry(). However, in the dax_unlock_mapping_entry()
case the implementation needs to recall the original entry. In the case
where the original entry is a 'pmd' entry it is possible that the pfn
performed to do the lookup is misaligned to the value retrieved in the
Xarray.
Change the api to return the unlock cookie from dax_lock_page() and pass
it to dax_unlock_page(). This fixes a bug where dax_unlock_page() was
assuming that the page was PMD-aligned if the entry was a PMD entry with
signatures like:
WARNING: CPU: 38 PID: 1396 at fs/dax.c:340 dax_insert_entry+0x2b2/0x2d0
RIP: 0010:dax_insert_entry+0x2b2/0x2d0
[..]
Call Trace:
dax_iomap_pte_fault.isra.41+0x791/0xde0
ext4_dax_huge_fault+0x16f/0x1f0
? up_read+0x1c/0xa0
__do_fault+0x1f/0x160
__handle_mm_fault+0x1033/0x1490
handle_mm_fault+0x18b/0x3d0
Link: https://lkml.kernel.org/r/20181130154902.GL10377@bombadil.infradead.org
Fixes:
|
||
|
Jens Axboe
|
89d04ec349 |
Linux 4.20-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu JtwhVCE= =O1q1 -----END PGP SIGNATURE----- Merge tag 'v4.20-rc5' into for-4.21/block Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ... |
||
Ingo Molnar
|
4bbfd7467c |
Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions
to their vanilla RCU counterparts. This series is a step
towards complete removal of the RCU-bh and RCU-sched update-side
functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for
rcutorture testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein
for a bag-on-head-class bug.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
Paul E. McKenney
|
eaaf055f27 |
Merge branches 'bug.2018.11.12a', 'consolidate.2018.12.01a', 'doc.2018.11.12a', 'fixes.2018.11.12a', 'initrd.2018.11.08b', 'sil.2018.11.12a' and 'srcu.2018.11.27a' into HEAD
bug.2018.11.12a: Get rid of BUG_ON() and friends consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup doc.2018.11.12a: Documentation updates fixes.2018.11.12a: Miscellaneous fixes initrd.2018.11.08b: Automate creation of rcutorture initrd sil.2018.11.12a: Remove more spin_unlock_wait() calls |
||
|
Hugh Dickins
|
95feeabb77 |
mm/khugepaged: fix the xas_create_range() error path
collapse_shmem()'s xas_nomem() is very unlikely to fail, but it is
rightly given a failure path, so move the whole xas_create_range() block
up before __SetPageLocked(new_page): so that it does not need to
remember to unlock_page(new_page).
Add the missing mem_cgroup_cancel_charge(), and set (currently unused)
result to SCAN_FAIL rather than SCAN_SUCCEED.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261531200.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
06a5e1268a |
mm/khugepaged: collapse_shmem() do not crash on Compound
collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before
it holds page lock of the first page, racing truncation then extension
might conceivably have inserted a hugepage there already. Fail with the
SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or
otherwise mishandling the unexpected hugepage - though later we might
code up a more constructive way of handling it, with SCAN_SUCCESS.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
87c460a0bd |
mm/khugepaged: collapse_shmem() without freezing new_page
khugepaged's collapse_shmem() does almost all of its work, to assemble
the huge new_page from 512 scattered old pages, with the new_page's
refcount frozen to 0 (and refcounts of all old pages so far also frozen
to 0). Including shmem_getpage() to read in any which were out on swap,
memory reclaim if necessary to allocate their intermediate pages, and
copying over all the data from old to new.
Imagine the frozen refcount as a spinlock held, but without any lock
debugging to highlight the abuse: it's not good, and under serious load
heads into lockups - speculative getters of the page are not expecting
to spin while khugepaged is rescheduled.
One can get a little further under load by hacking around elsewhere; but
fortunately, freezing the new_page turns out to have been entirely
unnecessary, with no hacks needed elsewhere.
The huge new_page lock is already held throughout, and guards all its
subpages as they are brought one by one into the page cache tree; and
anything reading the data in that page, without the lock, before it has
been marked PageUptodate, would already be in the wrong. So simply
eliminate the freezing of the new_page.
Each of the old pages remains frozen with refcount 0 after it has been
replaced by a new_page subpage in the page cache tree, until they are
all unfrozen on success or failure: just as before. They could be
unfrozen sooner, but cause no problem once no longer visible to
find_get_entry(), filemap_map_pages() and other speculative lookups.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
042a308248 |
mm/khugepaged: minor reorderings in collapse_shmem()
Several cleanups in collapse_shmem(): most of which probably do not
really matter, beyond doing things in a more familiar and reassuring
order. Simplify the failure gotos in the main loop, and on success
update stats while interrupts still disabled from the last iteration.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
2af8ff2918 |
mm/khugepaged: collapse_shmem() remember to clear holes
Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp
flags khugepaged uses to allocate a huge page - in all common cases it
would just be a waste of effort - so collapse_shmem() must remember to
clear out any holes that it instantiates.
The obvious place to do so, where they are put into the page cache tree,
is not a good choice: because interrupts are disabled there. Leave it
until further down, once success is assured, where the other pages are
copied (before setting PageUptodate).
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
aaa52e3400 |
mm/khugepaged: fix crashes due to misaccounted holes
Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: |
||
|
Hugh Dickins
|
701270fa19 |
mm/khugepaged: collapse_shmem() stop if punched or truncated
Huge tmpfs testing showed that although collapse_shmem() recognizes a
concurrently truncated or hole-punched page correctly, its handling of
holes was liable to refill an emptied extent. Add check to stop that.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
006d3ff27e |
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that
__split_huge_page() was using i_size_read() while holding the irq-safe
lru_lock and page tree lock, but the 32-bit i_size_read() uses an
irq-unsafe seqlock which should not be nested inside them.
Instead, read the i_size earlier in split_huge_page_to_list(), and pass
the end offset down to __split_huge_page(): all while holding head page
lock, which is enough to prevent truncation of that extent before the
page tree lock has been taken.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils
Fixes:
|
||
|
Hugh Dickins
|
173d9d9fd3 |
mm/huge_memory: splitting set mapping+index before unfreeze
Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page). Move the setting of mapping and index up before the page_ref_unfreeze() in __split_huge_page_tail() to fix this: so that a page cache lookup cannot get a reference while the tail's mapping and index are unstable. In fact, might as well move them up before the smp_wmb(): I don't see an actual need for that, but if I'm missing something, this way round is safer than the other, and no less efficient. You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is misplaced, and should be left until after the trylock_page(); but left as is has not crashed since, and gives more stringent assurance. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: |
||
|
Hugh Dickins
|
906f9cdfc2 |
mm/huge_memory: rename freeze_page() to unmap_page()
The term "freeze" is used in several ways in the kernel, and in mm it
has the particular meaning of forcing page refcount temporarily to 0.
freeze_page() is just too confusing a name for a function that unmaps a
page: rename it unmap_page(), and rename unfreeze_page() remap_page().
Went to change the mention of freeze_page() added later in mm/rmap.c,
but found it to be incorrect: ordinary page reclaim reaches there too;
but the substance of the comment still seems correct, so edit it down.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils
Fixes:
|
||
Andrea Arcangeli
|
dcf7fe9d89 |
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
Set the page dirty if VM_WRITE is not set because in such case the pte
won't be marked dirty and the page would be reclaimed without writepage
(i.e. swapout in the shmem case).
This was found by source review. Most apps (certainly including QEMU)
only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't
modify the memory in the first place. This is for correctness and it
could help the non cooperative use case to avoid unexpected data loss.
Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Andrea Arcangeli
|
e2a50c1f64 |
userfaultfd: shmem: add i_size checks
With MAP_SHARED: recheck the i_size after taking the PT lock, to
serialize against truncate with the PT lock. Delete the page from the
pagecache if the i_size_read check fails.
With MAP_PRIVATE: check the i_size after the PT lock before mapping
anonymous memory or zeropages into the MAP_PRIVATE shmem mapping.
A mostly irrelevant cleanup: like we do the delete_from_page_cache()
pagecache removal after dropping the PT lock, the PT lock is a spinlock
so drop it before the sleepable page lock.
Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com
Fixes:
|
||
|
Andrea Arcangeli
|
29ec90660d |
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
After the VMA to register the uffd onto is found, check that it has VM_MAYWRITE set before allowing registration. This way we inherit all common code checks before allowing to fill file holes in shmem and hugetlbfs with UFFDIO_COPY. The userfaultfd memory model is not applicable for readonly files unless it's a MAP_PRIVATE. Link: http://lkml.kernel.org/r/20181126173452.26955-4-aarcange@redhat.com Fixes: |
||
|
Andrea Arcangeli
|
5b51072e97 |
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
Userfaultfd did not create private memory when UFFDIO_COPY was invoked
on a MAP_PRIVATE shmem mapping. Instead it wrote to the shmem file,
even when that had not been opened for writing. Though, fortunately,
that could only happen where there was a hole in the file.
Fix the shmem-backed implementation of UFFDIO_COPY to create private
memory for MAP_PRIVATE mappings. The hugetlbfs-backed implementation
was already correct.
This change is visible to userland, if userfaultfd has been used in
unintended ways: so it introduces a small risk of incompatibility, but
is necessary in order to respect file permissions.
An app that uses UFFDIO_COPY for anything like postcopy live migration
won't notice the difference, and in fact it'll run faster because there
will be no copy-on-write and memory waste in the tmpfs pagecache
anymore.
Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like
before.
The real zeropage can also be built on a MAP_PRIVATE shmem mapping
through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is
never dirty, in turn even an mprotect upgrading the vma permission from
PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable.
Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com
Fixes:
|
||
|
Andrea Arcangeli
|
9e368259ad |
userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails
Patch series "userfaultfd shmem updates".
Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the
lack of the VM_MAYWRITE check and the lack of i_size checks.
Then looking into the above we also fixed the MAP_PRIVATE case.
Hugh by source review also found a data loss source if UFFDIO_COPY is
used on shmem MAP_SHARED PROT_READ mappings (the production usages
incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't
happen in those production usages like with QEMU).
The whole patchset is marked for stable.
We verified QEMU postcopy live migration with guest running on shmem
MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE.
Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU
unconditionally invokes a punch hole if the guest mapping is filebacked
and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and
for the anon backend).
This patch (of 5):
We internally used EFAULT to communicate with the caller, switch to
ENOENT, so EFAULT can be used as a non internal retval.
Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com
Fixes:
|
||
|
Wei Yang
|
8f416836c0 |
mm/page_alloc.c: fix calculation of pgdat->nr_zones
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally. This is correct in the normal
case, while not exact in hot-plug situation.
This function is used in two places:
* free_area_init_core()
* move_pfn_range_to_zone()
In the first case, we are sure zone index increase monotonically. While
in the second one, this is under users control.
One way to reproduce this is:
----------------------------
1. create a virtual machine with empty node1
-m 4G,slots=32,maxmem=32G \
-smp 4,maxcpus=8 \
-numa node,nodeid=0,mem=4G,cpus=0-3 \
-numa node,nodeid=1,mem=0G,cpus=4-7
2. hot-add cpu 3-7
cpu-add [3-7]
2. hot-add memory to nod1
object_add memory-backend-ram,id=ram0,size=1G
device_add pc-dimm,id=dimm0,memdev=ram0,node=1
3. online memory with following order
echo online_movable > memory47/state
echo online > memory40/state
After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).
Michal said:
"Having an incorrect nr_zones might result in all sorts of problems
which would be quite hard to debug (e.g. reclaim not considering the
movable zone). I do not expect many users would suffer from this it
but still this is trivial and obviously right thing to do so
backporting to the stable tree shouldn't be harmful (last famous
words)"
Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes:
|
||
Yu Zhao
|
c1cb20d437 |
mm: use swp_offset as key in shmem_replace_page()
We changed the key of swap cache tree from swp_entry_t.val to
swp_offset. We need to do so in shmem_replace_page() as well.
Hugh said:
"shmem_replace_page() has been wrong since the day I wrote it: good
enough to work on swap "type" 0, which is all most people ever use
(especially those few who need shmem_replace_page() at all), but
broken once there are any non-0 swp_type bits set in the higher order
bits"
Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com
Fixes:
|
||
Pavel Tikhomirov
|
6ff38bd402 |
mm: cleancache: fix corruption on missed inode invalidation
If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:
__delete_from_page_cache
(no shadow case)
unaccount_page_cache_page
cleancache_put_page
page_cache_delete
mapping->nrpages -= nr
(nrpages becomes 0)
We don't clean the cleancache for an inode after final file truncation
(removal).
truncate_inode_pages_final
check (nrpages || nrexceptional) is false
no truncate_inode_pages
no cleancache_invalidate_inode(mapping)
These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.
Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.
[akpm@linux-foundation.org: add comment, per Jan]
Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com
Fixes: commit
|
||
John Hubbard
|
08be37b798 |
mm/gup: finish consolidating error handling
Commit |
||
|
Paul E. McKenney
|
b401ec1848 |
mm: Replace call_rcu_sched() with call_rcu()
Now that call_rcu()'s callback is not invoked until after all preempt-disable regions of code have completed (in addition to explicitly marked RCU read-side critical sections), call_rcu() can be used in place of call_rcu_sched(). This commit therefore makes that change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> |
||
|
Paul E. McKenney
|
6564a25e6c |
slab: Replace synchronize_sched() with synchronize_rcu()
Now that synchronize_rcu() waits for preempt-disable regions of code as well as RCU read-side critical sections, synchronize_sched() can be replaced by synchronize_rcu(). This commit therefore makes this change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> |
||
|
Jens Axboe
|
0a1b8b87d0 |
block: make blk_poll() take a parameter on whether to spin or not
blk_poll() has always kept spinning until it found an IO. This is fine for SYNC polling, since we need to find one request we have pending, but in preparation for ASYNC polling it can be beneficial to just check if we have any entries available or not. Existing callers are converted to pass in 'spin == true', to retain the old behavior. Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Jani Nikula
|
2ac5e38ea4 |
Merge drm/drm-next into drm-intel-next-queued
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Jens Axboe
|
849a370016 |
block: avoid ordered task state change for polled IO
For the core poll helper, the task state setting don't need to imply any atomics, as it's the current task itself that is being modified and we're not going to sleep. For IRQ driven, the wakeup path have the necessary barriers to not need us using the heavy handed version of the task state setting. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jens Axboe
|
a78b03bc73 |
Linux 4.20-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlvx2sAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGycgIAIuxobwt0RRKa0zO ROS+34JGoC2yU2P9VdEGWdtxS6ANMVQgKPBhWL6s+xR89Kd+V4xSdJLD1pNTxxqP 0DCva0np1/Q4juH+JbU50v/lykoLgteZ0P0LBRGf1y8p3WiLPv45IbnNsMDNYhB2 7a8rOmZYakRY9CPznRDw3X8cJt3sddKgFJHIOGz1OQJVWtCD0KPGcJmQNsbDSagY Zx6Z5BKSIdjRqaAdN5gDa1Pft3WQo7TpaQGl80lSsgr5LcjmscXA3sClOCy+25Mo FZLx0PcwP+Efq8RTGzNK51WSOMa6d37hvjDqUAdQBOR0KbyjRyXQwyQVw/MGbPJs 7J3Pzm0= =56Mt -----END PGP SIGNATURE----- Merge tag 'v4.20-rc3' into for-4.21/block Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Chen Chang
|
45e79815b8 |
mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com Signed-off-by: Chen Chang <rainccrun@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
c63ae43ba5 |
mm, page_alloc: check for max order in hot path
Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yufen Yu
|
1a41364693 |
tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Janne Huttunen
|
13c9aaf7fa |
mm/vmstat.c: fix NUMA statistics updates
Scan through the whole array to see if an update is needed. While we're
at it, use sizeof() to be safe against any possible type changes in the
future.
The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus. Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway. So I wouldn't bother to mark
this for stable, yet something nice to fix.
[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes:
|
||
|
Mike Rapoport
|
78179556e7 |
mm/gup.c: fix follow_page_mask() kerneldoc comment
Commit
|
||
|
Michal Hocko
|
9d7899999c |
mm, memory_hotplug: check zone_movable in has_unmovable_pages
Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit |
||
Vasily Averin
|
873d7bcfd0 |
mm/swapfile.c: use kvzalloc for swap_info_struct allocation
Commit |
||
|
Mike Kravetz
|
5e41540c8a |
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes:
|
||
Vitaly Wool
|
ca0246bb97 |
z3fold: fix possible reclaim races
Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com Signed-off-by: Vitaly Wool <vitaly.vul@sony.com> Signed-off-by: Jongseok Kim <ks77sj@gmail.com> Reported-by-by: Jongseok Kim <ks77sj@gmail.com> Reviewed-by: Snild Dolkow <snild@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jens Axboe
|
0619317ff8 |
block: add polled wakeup task helper
If we're polling for IO on a device that doesn't use interrupts, then IO completion loop (and wake of task) is done by submitting task itself. If that is the case, then we don't need to enter the wake_up_process() function, we can simply mark ourselves as TASK_RUNNING. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Lance Roy
|
35f3aa39f2 |
mm: Replace spin_is_locked() with lockdep
lockdep_assert_held() is better suited to checking locking requirements, since it only checks if the current thread holds the lock regardless of whether someone else does. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Shakeel Butt <shakeelb@google.com> Cc: <linux-mm@kvack.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> |
||
Kuo-Hsin Yang
|
64e3d12f76 |
mm, drm/i915: mark pinned shmemfs pages as unevictable
The i915 driver uses shmemfs to allocate backing storage for gem objects. These shmemfs pages can be pinned (increased ref count) by shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan wastes a lot of time scanning these pinned pages. In some extreme case, all pages in the inactive anon lru are pinned, and only the inactive anon lru is scanned due to inactive_ratio, the system cannot swap and invokes the oom-killer. Mark these pinned pages as unevictable to speed up vmscan. Export pagevec API check_move_unevictable_pages(). This patch was inspired by Chris Wilson's change [1]. [1]: https://patchwork.kernel.org/patch/9768741/ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> # mm part Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> |
||
|
Michal Hocko
|
dd33ad7b25 |
memory_hotplug: cond_resched in __remove_pages
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
89c83fb539 |
mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask
THP allocation mode is quite complex and it depends on the defrag mode. This complexity is hidden in alloc_hugepage_direct_gfpmask from a large part currently. The NUMA special casing (namely __GFP_THISNODE) is however independent and placed in alloc_pages_vma currently. This both adds an unnecessary branch to all vma based page allocation requests and it makes the code more complex unnecessarily as well. Not to mention that e.g. shmem THP used to do the node reclaiming unconditionally regardless of the defrag mode until recently. This was not only unexpected behavior but it was also hardly a good default behavior and I strongly suspect it was just a side effect of the code sharing more than a deliberate decision which suggests that such a layering is wrong. Get rid of the thp special casing from alloc_pages_vma and move the logic to alloc_hugepage_direct_gfpmask. __GFP_THISNODE is applied to the resulting gfp mask only when the direct reclaim is not requested and when there is no explicit numa binding to preserve the current logic. Please note that there's also a slight difference wrt MPOL_BIND now. The previous code would avoid using __GFP_THISNODE if the local node was outside of policy_nodemask(). After this patch __GFP_THISNODE is avoided for all MPOL_BIND policies. So there's a difference that if local node is actually allowed by the bind policy's nodemask, previously __GFP_THISNODE would be added, but now it won't be. From the behavior POV this is still correct because the policy nodemask is used. Link: http://lkml.kernel.org/r/20180925120326.24392-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrea Arcangeli
|
ac5b2c1891 |
mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings
THP allocation might be really disruptive when allocated on NUMA system with the local node full or hard to reclaim. Stefan has posted an allocation stall report on 4.12 based SLES kernel which suggests the same issue: kvm: page allocation stalls for 194572ms, order:9, mode:0x4740ca(__GFP_HIGHMEM|__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_THISNODE|__GFP_MOVABLE|__GFP_DIRECT_RECLAIM), nodemask=(null) kvm cpuset=/ mems_allowed=0-1 CPU: 10 PID: 84752 Comm: kvm Tainted: G W 4.12.0+98-ph <a href="/view.php?id=1" title="[geschlossen] Integration Ramdisk" class="resolved">0000001</a> SLE15 (unreleased) Hardware name: Supermicro SYS-1029P-WTRT/X11DDW-NT, BIOS 2.0 12/05/2017 Call Trace: dump_stack+0x5c/0x84 warn_alloc+0xe0/0x180 __alloc_pages_slowpath+0x820/0xc90 __alloc_pages_nodemask+0x1cc/0x210 alloc_pages_vma+0x1e5/0x280 do_huge_pmd_wp_page+0x83f/0xf00 __handle_mm_fault+0x93d/0x1060 handle_mm_fault+0xc6/0x1b0 __do_page_fault+0x230/0x430 do_page_fault+0x2a/0x70 page_fault+0x7b/0x80 [...] Mem-Info: active_anon:126315487 inactive_anon:1612476 isolated_anon:5 active_file:60183 inactive_file:245285 isolated_file:0 unevictable:15657 dirty:286 writeback:1 unstable:0 slab_reclaimable:75543 slab_unreclaimable:2509111 mapped:81814 shmem:31764 pagetables:370616 bounce:0 free:32294031 free_pcp:6233 free_cma:0 Node 0 active_anon:254680388kB inactive_anon:1112760kB active_file:240648kB inactive_file:981168kB unevictable:13368kB isolated(anon):0kB isolated(file):0kB mapped:280240kB dirty:1144kB writeback:0kB shmem:95832kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 81225728kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no Node 1 active_anon:250583072kB inactive_anon:5337144kB active_file:84kB inactive_file:0kB unevictable:49260kB isolated(anon):20kB isolated(file):0kB mapped:47016kB dirty:0kB writeback:4kB shmem:31224kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 31897600kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no The defrag mode is "madvise" and from the above report it is clear that the THP has been allocated for MADV_HUGEPAGA vma. Andrea has identified that the main source of the problem is __GFP_THISNODE usage: : The problem is that direct compaction combined with the NUMA : __GFP_THISNODE logic in mempolicy.c is telling reclaim to swap very : hard the local node, instead of failing the allocation if there's no : THP available in the local node. : : Such logic was ok until __GFP_THISNODE was added to the THP allocation : path even with MPOL_DEFAULT. : : The idea behind the __GFP_THISNODE addition, is that it is better to : provide local memory in PAGE_SIZE units than to use remote NUMA THP : backed memory. That largely depends on the remote latency though, on : threadrippers for example the overhead is relatively low in my : experience. : : The combination of __GFP_THISNODE and __GFP_DIRECT_RECLAIM results in : extremely slow qemu startup with vfio, if the VM is larger than the : size of one host NUMA node. This is because it will try very hard to : unsuccessfully swapout get_user_pages pinned pages as result of the : __GFP_THISNODE being set, instead of falling back to PAGE_SIZE : allocations and instead of trying to allocate THP on other nodes (it : would be even worse without vfio type1 GUP pins of course, except it'd : be swapping heavily instead). Fix this by removing __GFP_THISNODE for THP requests which are requesting the direct reclaim. This effectivelly reverts |
||
Roman Gushchin
|
e68599a3c3 |
mm: handle no memcg case in memcg_kmem_charge() properly
Mike Galbraith reported a regression caused by the commit |
||
|
Linus Torvalds
|
5f21585384 |
for-linus-20181102
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvchGgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpj/1D/4kEQx4ncnFoZk8QshHV1L++rH3BbcLjQDd
Wbh9ZSIQdI/gHTzS6bE7x3YfcbpMWPMO3+jFawdfRiFTEjlF8vQ+mnJ+Btb3z4D6
mGEeFGVhHExlp2a0x/Ma8YWVNlMB7BE8Tq73bZEVMY+9lbpmDW/vp7Sfa87LBDKQ
ZmY+My+VdHN7qLtQ7t3W/HtpbU+kcXMMd3ICjK4i+ofXy6mynk4+oQ2jwyXc5L86
UCJCsTsSRr3CgbnkW/uprHo0XHk8i7O/4C3oR+x4pAIxCCa9g+vmw0EO9fvi/2iQ
qe8jKdm7Y09xu/TiPBa7iz45tdh0cNMJKo3OezmSF9Np+r69KL5C/U4GRPKN3Iwm
keoqn14ScABkYMSe4ys1AdEgKD6bNUaW3r/lJxTH2oUR23mjnCLp7c4WD/G+MlbB
CzoakQyCHTZmDFLr2Kc8bkjmpil2T2UFfmLIDAu30LWIYeSGpiIO/V+g1foJMF2f
06ERltNvgX1BJjoh4NSWySLEf1ZtkUU60NeATRol6gwhnIyLrHsgfm6OEhqlW/7x
Xc1BWyzX7K6c3Dskk/u5aSRyXOyRC9KkMt3/2XexeDNHkte9yMH0IgSvopPBuER8
+iPvPjNp7ychTKZB3zpSnlqGgePTjbufIEBtO3OyUmDZKjUqxahtxkQfmPhoclu+
XdR4ArcqNg==
=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
|
||
|
Linus Torvalds
|
c2aa1a444c |
vfs: rework data cloning infrastructure
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use a common .remap_file_range method and supply generic bounds and sanity checking functions that are shared with the data write path. The current VFS infrastructure has problems with rlimit, LFS file sizes, file time stamps, maximum filesystem file sizes, stripping setuid bits, etc and so they are addressed in these commits. We also introduce the ability for the ->remap_file_range methods to return short clones so that clones for vfs_copy_file_range() don't get rejected if the entire range can't be cloned. It also allows filesystems to sliently skip deduplication of partial EOF blocks if they are not capable of doing so without requiring errors to be thrown to userspace. All existing filesystems are converted to user the new .remap_file_range method, and both XFS and ocfs2 are modified to make use of the new generic checking infrastructure. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJb29gEAAoJEK3oKUf0dfodpOAQAL2VbHjvKXEwNMDTKscSRMmZ Z0xXo3gamFKQ+VGOqy2g2lmAYQs9SAnTuCGTJ7zIAp7u+q8gzUy5FzKAwLS4Id6L 8siaY6nzlicfO04d0MdXnWz0f3xykChgzfdQfVUlUi7WrDioBUECLPmx4a+USsp1 DQGjLOZfoOAmn2rijdnH9RTEaHqg+8mcTaLN9TRav4gGqrWxldFKXw2y6ouFC7uo /hxTRNXR9VI+EdbDelwBNXl9nU9gQA0WLOvRKwgUrtv6bSJohTPsmXt7EbBtNcVR cl3zDNc1sLD1bLaRLEUAszI/33wXaaQgom1iB51obIcHHef+JxRNG/j6rUMfzxZI VaauGv5EIvtaKN0LTAqVVLQ8t2MQFYfOr8TykmO+1UFog204aKRANdVMHDSjxD/0 dTGKJGcq+HnKQ+JHDbTdvuXEL8sUUl1FiLjOQbZPw63XmuddLKFUA2TOjXn6htbU 1h1MG5d9KjGLpabp2BQheczD08NuSmcrOBNt7IoeI3+nxr3HpMwprfB9TyaERy9X iEgyVXmjjc9bLLRW7A2wm77aW64NvPs51wKMnvuNgNwnCewrGS6cB8WVj2zbQjH1 h3f3nku44s9ctNPSBzb/sJLnpqmZQ5t0oSmrMSN+5+En6rNTacoJCzxHRJBA7z/h Z+C6y1GTZw0euY6Zjiwu =CE/A -----END PGP SIGNATURE----- Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull vfs dedup fixes from Dave Chinner: "This reworks the vfs data cloning infrastructure. We discovered many issues with these interfaces late in the 4.19 cycle - the worst of them (data corruption, setuid stripping) were fixed for XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all the problems was needed. That rework is the contents of this pull request. Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use a common .remap_file_range method and supply generic bounds and sanity checking functions that are shared with the data write path. The current VFS infrastructure has problems with rlimit, LFS file sizes, file time stamps, maximum filesystem file sizes, stripping setuid bits, etc and so they are addressed in these commits. We also introduce the ability for the ->remap_file_range methods to return short clones so that clones for vfs_copy_file_range() don't get rejected if the entire range can't be cloned. It also allows filesystems to sliently skip deduplication of partial EOF blocks if they are not capable of doing so without requiring errors to be thrown to userspace. Existing filesystems are converted to user the new remap_file_range method, and both XFS and ocfs2 are modified to make use of the new generic checking infrastructure" * tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits) xfs: remove [cm]time update from reflink calls xfs: remove xfs_reflink_remap_range xfs: remove redundant remap partial EOF block checks xfs: support returning partial reflink results xfs: clean up xfs_reflink_remap_blocks call site xfs: fix pagecache truncation prior to reflink ocfs2: remove ocfs2_reflink_remap_range ocfs2: support partial clone range and dedupe range ocfs2: fix pagecache truncation prior to reflink ocfs2: truncate page cache for clone destination file before remapping vfs: clean up generic_remap_file_range_prep return value vfs: hide file range comparison function vfs: enable remap callers that can handle short operations vfs: plumb remap flags through the vfs dedupe functions vfs: plumb remap flags through the vfs clone functions vfs: make remap_file_range functions take and return bytes completed vfs: remap helper should update destination inode metadata vfs: pass remap flags to generic_remap_checks vfs: pass remap flags to generic_remap_file_range_prep vfs: combine the clone and dedupe into a single remap_file_range ... |
||
|
Linus Torvalds
|
9931a07d51 |
Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ... |
||
|
Dennis Zhou
|
b5f2954d30 |
blkcg: revert blkcg cleanups series
This reverts a series committed earlier due to null pointer exception bug report in [1]. It seems there are edge case interactions that I did not consider and will need some time to understand what causes the adverse interactions. The original series can be found in [2] with a follow up series in [3]. [1] https://www.spinics.net/lists/cgroups/msg20719.html [2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/ This reverts the following commits: |
||
|
Linus Torvalds
|
b5b1de3537 |
virtio, vhost: fixes, tweaks
virtio balloon page hinting support vhost scsi control queue misc fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJb222AAAoJECgfDbjSjVRpfHMH/1uh87pIj6Qbh9LRZm0dRVHs iEuIa0TECb+9AmqHRBliEcqWjihWnlQnSwE6d/ZTk9cH9zEEXsIu0B7nDzjGwJ5b m7wq679JqrtGpCdQhRH85sk8P3fs5ldatdbc4/0fsPwwkoXHcqTOpSZWyhtQHGc4 EkzzxHXVhVXgRBjzLXVCMoOAQ+8QfMZFrKIgKuOB0I4OVughFrAGf0Hemm18f4CL 5+YwsJQjleDkm+Udf+FTQS2oZ57DJsOLm2bwoKgqCkBaDfPlR92uWjgTa50WXggo RaokpFQkJKpz11yenezslzrVWUJApnWnUhfRd71t1ttvujrrcD9zUvWEVMURbuU= =2i/5 -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio/vhost updates from Michael Tsirkin: "Fixes and tweaks: - virtio balloon page hinting support - vhost scsi control queue - misc fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: remove reference to bogus vsock file vhost/scsi: Use common handling code in request queue handler vhost/scsi: Extract common handling code from control queue handler vhost/scsi: Respond to control queue operations vhost/scsi: truncate T10 PI iov_iter to prot_bytes virtio-balloon: VIRTIO_BALLOON_F_PAGE_POISON mm/page_poison: expose page_poisoning_enabled to kernel modules virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT kvm_config: add CONFIG_VIRTIO_MENU |
||
|
Linus Torvalds
|
6444ccfd69 |
Merge branch 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou: "Two small things for v4.20. The first fixes a clang uninitialized variable warning for arm64 in the default path calls BUILD_BUG(). The second removes an unnecessary unlikely() in a WARN_ON() use" * 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: arm64: percpu: Initialize ret in the default case mm: percpu: remove unnecessary unlikely() |
||
Fengguang Wu
|
2ebe82288b |
mm/gup.c: fix __get_user_pages_fast() comment
mmu_gather_tlb() no longer exists. Replace with mmu_table_batch(). Link: http://lkml.kernel.org/r/20180928053441.rpzwafzlsnp74mkl@wfg-t540p.sh.intel.com Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jan Kara
|
f2c57d91b0 |
mm: Fix warning in insert_pfn()
In DAX mode a write pagefault can race with write(2) in the following
way:
CPU0 CPU1
write fault for mapped zero page (hole)
dax_iomap_rw()
iomap_apply()
xfs_file_iomap_begin()
- allocates blocks
dax_iomap_actor()
invalidate_inode_pages2_range()
- invalidates radix tree entries in given range
dax_iomap_pte_fault()
grab_mapping_entry()
- no entry found, creates empty
...
xfs_file_iomap_begin()
- finds already allocated block
...
vmf_insert_mixed_mkwrite()
- WARNs and does nothing because there
is still zero page mapped in PTE
unmap_mapping_pages()
This race results in WARN_ON from insert_pfn() and is occasionally
triggered by fstest generic/344. Note that the race is otherwise
harmless as before write(2) on CPU0 is finished, we will invalidate page
tables properly and thus user of mmap will see modified data from
write(2) from that point on. So just restrict the warning only to the
case when the PFN in PTE is not zero page.
Link: http://lkml.kernel.org/r/20180824154542.26872-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
David Hildenbrand
|
381eab4a6e |
mm/memory_hotplug: fix online/offline_pages called w.o. mem_hotplug_lock
There seem to be some problems as result of |
||
|
David Hildenbrand
|
8df1d0e4a2 |
mm/memory_hotplug: make add_memory() take the device_hotplug_lock
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see
|
||
|
David Hildenbrand
|
d15e59260f |
mm/memory_hotplug: make remove_memory() take the device_hotplug_lock
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mike Rapoport
|
2f770806fd |
mm/memblock.c: warn if zero alignment was requested
After updating all memblock users to explicitly specify SMP_CACHE_BYTES alignment rather than use 0, it is still possible that uncovered users may sneak in. Add a WARN_ON_ONCE for such cases. [sfr@canb.auug.org.au: use dump_stack() instead of WARN_ON_ONCE for the alignment checks] Link: http://lkml.kernel.org/r/20181016131927.6ceba6ab@canb.auug.org.au [akpm@linux-foundation.org: add apologetic comment] Link: http://lkml.kernel.org/r/20181011060850.GA19822@rapoport-lnx Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
7e1c4e2792 |
memblock: stop using implicit alignment to SMP_CACHE_BYTES
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
57c8a661d9 |
mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
97ad1087ef |
memblock: replace BOOTMEM_ALLOC_* with MEMBLOCK variants
Drop BOOTMEM_ALLOC_ACCESSIBLE and BOOTMEM_ALLOC_ANYWHERE in favor of identical MEMBLOCK definitions. Link: http://lkml.kernel.org/r/1536927045-23536-29-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
bda49a8116 |
mm: remove nobootmem
Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
7c2ee349cf |
memblock: rename __free_pages_bootmem to memblock_free_pages
The conversion is done using
sed -i 's@__free_pages_bootmem@memblock_free_pages@' \
$(git grep -l __free_pages_bootmem)
Link: http://lkml.kernel.org/r/1536927045-23536-27-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
c6ffc5ca8f |
memblock: rename free_all_bootmem to memblock_free_all
The conversion is done using
sed -i 's@free_all_bootmem@memblock_free_all@' \
$(git grep -l free_all_bootmem)
Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
53ab85ebfd |
memblock: replace free_bootmem_late with memblock_free_late
The free_bootmem_late and memblock_free_late do exactly the same thing: they iterate over a range and give pages to the page allocator. Replace calls to free_bootmem_late with calls to memblock_free_late and remove the bootmem variant. Link: http://lkml.kernel.org/r/1536927045-23536-25-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
2013288f72 |
memblock: replace free_bootmem{_node} with memblock_free
The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
6c7835f8d0 |
mm: nobootmem: remove bootmem allocation APIs
The bootmem compatibility APIs are not used and can be removed. Link: http://lkml.kernel.org/r/1536927045-23536-23-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
3913c8f9f9 |
memblock: add align parameter to memblock_alloc_node()
With the align parameter memblock_alloc_node() can be used as drop in replacement for alloc_bootmem_pages_node() and __alloc_bootmem_node(), which is done in the following patches. Link: http://lkml.kernel.org/r/1536927045-23536-15-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
eb31d559f1 |
memblock: remove _virt from APIs returning virtual address
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
9a8dd708d5 |
memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*
Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
b146ada221 |
mm: nobootmem: remove dead code
Several bootmem functions and macros are not used. Remove them. Link: http://lkml.kernel.org/r/1536927045-23536-6-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
355c45affc |
mm: remove bootmem allocator implementation.
All architectures have been converted to use MEMBLOCK + NO_BOOTMEM. The bootmem allocator implementation can be removed. Link: http://lkml.kernel.org/r/1536927045-23536-5-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
aca52c3983 |
mm: remove CONFIG_HAVE_MEMBLOCK
All architecures use memblock for early memory management. There is no need for the CONFIG_HAVE_MEMBLOCK configuration option. [rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs] Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx [rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal] Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx [rppt@linux.vnet.ibm.com: remove stale #else and the code it protects] Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mike Rapoport
|
b4a991ec58 |
mm: remove CONFIG_NO_BOOTMEM
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any kernel configuration and therefore it can be removed. [alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init] Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dan Carpenter
|
4b408c74ee |
mm/gup_benchmark.c: prevent integer overflow in ioctl
The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned
long. On 32 bit systems we could trick the kernel into allocating fewer
pages than expected.
Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain
Fixes:
|
||
|
Jérôme Glisse
|
ec131b2d7f |
mm/hmm: invalidate device page table at start of invalidation
Invalidate device page table at start of invalidation and invalidate in progress CPU page table snapshooting at both start and end of any invalidation. This is helpful when device need to dirty page because the device page table report the page as dirty. Dirtying page must happen in the start mmu notifier callback and not in the end one. Link: http://lkml.kernel.org/r/20181019160442.18723-7-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jérôme Glisse
|
44532d4c59 |
mm/hmm: use a structure for update callback parameters
Use a structure to gather all the parameters for the update callback. This make it easier when adding new parameters by avoiding having to update all callback function signature. The hmm_update structure is always associated with a mmu_notifier callbacks so we are not planing on grouping multiple updates together. Nor do we care about page size for the range as range will over fully cover the page being invalidated (this is a mmu_notifier property). Link: http://lkml.kernel.org/r/20181019160442.18723-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jérôme Glisse
|
d08faca018 |
mm/hmm: properly handle migration pmd
Before this patch migration pmd entry (!pmd_present()) would have been treated as a bad entry (pmd_bad() returns true on migration pmd entry). The outcome was that device driver would believe that the range covered by the pmd was bad and would either SIGBUS or simply kill all the device's threads (each device driver decide how to react when the device tries to access poisonnous or invalid range of memory). This patch explicitly handle the case of migration pmd entry which are non present pmd entry and either wait for the migration to finish or report empty range (when device is just trying to pre- fill a range of virtual address and thus do not want to wait or trigger page fault). Link: http://lkml.kernel.org/r/20181019160442.18723-5-jglisse@redhat.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Ralph Campbell
|
86a2d59841 |
mm/hmm: fix race between hmm_mirror_unregister() and mmu_notifier callback
In hmm_mirror_unregister(), mm->hmm is set to NULL and then mmu_notifier_unregister_no_release() is called. That creates a small window where mmu_notifier can call mmu_notifier_ops with mm->hmm equal to NULL. Fix this by first unregistering mmu notifier callbacks and then setting mm->hmm to NULL. Similarly in hmm_register(), set mm->hmm before registering mmu_notifier callbacks so callback functions always see mm->hmm set. Link: http://lkml.kernel.org/r/20181019160442.18723-4-jglisse@redhat.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ralph Campbell
|
aab8d0520e |
mm/rmap: map_pte() was not handling private ZONE_DEVICE page properly
Private ZONE_DEVICE pages use a special pte entry and thus are not present. Properly handle this case in map_pte(), it is already handled in check_pte(), the map_pte() part was lost in some rebase most probably. Without this patch the slow migration path can not migrate back to any private ZONE_DEVICE memory to regular memory. This was found after stress testing migration back to system memory. This ultimatly can lead to the CPU constantly page fault looping on the special swap entry. Link: http://lkml.kernel.org/r/20181019160442.18723-3-jglisse@redhat.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jérôme Glisse
|
f813f21971 |
mm/hmm: fix utf8 ...
Patch series "HMM updates, improvements and fixes", v2 Few fixes that only affect HMM users. Improve the synchronization call back so that we match was other mmu_notifier listener do and add proper support to the new blockable flags in the process. For curious folks here are branches to leverage HMM in various existing device drivers: https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-nouveau-v01 https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-radeon-v00 https://cgit.freedesktop.org/~glisse/linux/log/?h=hmm-intel-v00 More to come (amd gpu, Mellanox, ...) I expect more of the preparatory work for nouveau will be merge in 4.20 (like we have been doing since 4.16) and i will wait until this patchset is upstream before pushing the patches that actualy make use of HMM (to avoid complex tree inter-dependency). This patch (of 6): Somehow utf=8 must have been broken. Link: http://lkml.kernel.org/r/20181019160442.18723-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Darrick J. Wong
|
eca3654e3c |
vfs: enable remap callers that can handle short operations
Plumb in a remap flag that enables the filesystem remap handler to shorten remapping requests for callers that can handle it. Now copy_file_range can report partial success (in case we run up against alignment problems, resource limits, etc.). We also enable CAN_SHORTEN for fideduperange to maintain existing userspace-visible behavior where xfs/btrfs shorten the dedupe range to avoid stale post-eof data exposure. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
42ec3d4c02 |
vfs: make remap_file_range functions take and return bytes completed
Change the remap_file_range functions to take a number of bytes to operate upon and return the number of bytes they operated on. This is a requirement for allowing fs implementations to return short clone/dedupe results to the user, which will enable us to obey resource limits in a graceful manner. A subsequent patch will enable copy_file_range to signal to the ->clone_file_range implementation that it can handle a short length, which will be returned in the function's return value. For now the short return is not implemented anywhere so the behavior won't change -- either copy_file_range manages to clone the entire range or it tries an alternative. Neither clone ioctl can take advantage of this, alas. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
3d28193e1d |
vfs: pass remap flags to generic_remap_checks
Pass the same remap flags to generic_remap_checks for consistency. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
9fd91a90cb |
vfs: strengthen checking of file range inputs to generic_remap_checks
File range remapping, if allowed to run past the destination file's EOF, is an optimization on a regular file write. Regular file writes that extend the file length are subject to various constraints which are not checked by range cloning. This is a correctness problem because we're never allowed to touch ranges that the page cache can't support (s_maxbytes); we're not supposed to deal with large offsets (MAX_NON_LFS) if O_LARGEFILE isn't set; and we must obey resource limits (RLIMIT_FSIZE). Therefore, add these checks to the new generic_remap_checks function so that we curtail unexpected behavior. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Darrick J. Wong
|
1383a7ed67 |
vfs: check file ranges before cloning files
Move the file range checks from vfs_clone_file_prep into a separate generic_remap_checks function so that all the checks are collected in a central location. This forms the basis for adding more checks from generic_write_checks that will make cloning's input checking more consistent with write input checking. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com> |
||
|
Linus Torvalds
|
dad4f140ed |
Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-dax
Pull XArray conversion from Matthew Wilcox: "The XArray provides an improved interface to the radix tree data structure, providing locking as part of the API, specifying GFP flags at allocation time, eliminating preloading, less re-walking the tree, more efficient iterations and not exposing RCU-protected pointers to its users. This patch set 1. Introduces the XArray implementation 2. Converts the pagecache to use it 3. Converts memremap to use it The page cache is the most complex and important user of the radix tree, so converting it was most important. Converting the memremap code removes the only other user of the multiorder code, which allows us to remove the radix tree code that supported it. I have 40+ followup patches to convert many other users of the radix tree over to the XArray, but I'd like to get this part in first. The other conversions haven't been in linux-next and aren't suitable for applying yet, but you can see them in the xarray-conv branch if you're interested" * 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits) radix tree: Remove multiorder support radix tree test: Convert multiorder tests to XArray radix tree tests: Convert item_delete_rcu to XArray radix tree tests: Convert item_kill_tree to XArray radix tree tests: Move item_insert_order radix tree test suite: Remove multiorder benchmarking radix tree test suite: Remove __item_insert memremap: Convert to XArray xarray: Add range store functionality xarray: Move multiorder_check to in-kernel tests xarray: Move multiorder_shrink to kernel tests xarray: Move multiorder account test in-kernel radix tree test suite: Convert iteration test to XArray radix tree test suite: Convert tag_tagged_items to XArray radix tree: Remove radix_tree_clear_tags radix tree: Remove radix_tree_maybe_preload_order radix tree: Remove split/join code radix tree: Remove radix_tree_update_node_t page cache: Finish XArray conversion dax: Convert page fault handlers to XArray ... |
||
|
Mike Kravetz
|
22146c3ce9 |
hugetlbfs: dirty pages as they are added to pagecache
Some test systems were experiencing negative huge page reserve counts and
incorrect file block counts. This was traced to /proc/sys/vm/drop_caches
removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs
explicit code removes the pages, the appropriate accounting is not
performed.
This can be recreated as follows:
fallocate -l 2M /dev/hugepages/foo
echo 1 > /proc/sys/vm/drop_caches
fallocate -l 2M /dev/hugepages/foo
grep -i huge /proc/meminfo
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
HugePages_Total: 2048
HugePages_Free: 2047
HugePages_Rsvd: 18446744073709551615
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 4194304 kB
ls -lsh /dev/hugepages/foo
4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo
To address this issue, dirty pages as they are added to pagecache. This
can easily be reproduced with fallocate as shown above. Read faulted
pages will eventually end up being marked dirty. But there is a window
where they are clean and could be impacted by code such as drop_caches.
So, just dirty them all as they are added to the pagecache.
Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com
Fixes:
|
||
Omar Sandoval
|
aa8aa8a331 |
mm: export add_swap_extent()
Btrfs currently does not support swap files because swap's use of bmap does not work with copy-on-write and multiple devices. See |
||
|
Omar Sandoval
|
bc4ae27d81 |
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
The SWP_FILE flag serves two purposes: to make swap_{read,write}page() go
through the filesystem, and to make swapoff() call ->swap_deactivate().
For Btrfs, we want the latter but not the former, so split this flag into
two. This makes us always call ->swap_deactivate() if ->swap_activate()
succeeded, not just if it didn't add any swap extents itself.
This also resolves the issue of the very misleading name of SWP_FILE,
which is only used for swap files over NFS.
Link: http://lkml.kernel.org/r/6d63d8668c4287a4f6d203d65696e96f80abdfc7.1536704650.git.osandov@fb.com
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Andrea Arcangeli
|
7eef5f97c1 |
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
There should be no cache left by the time we overwrite the old transhuge pmd with the new one. It's already too late to flush through the virtual address because we already copied the page data to the new physical address. So flush the cache before the data copy. Also delete the "end" variable to shutoff a "unused variable" warning on x86 where flush_cache_range() is a noop. Link: http://lkml.kernel.org/r/20181015202311.7209-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrea Arcangeli
|
7066f0f933 |
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
change_huge_pmd() after arming the numa/protnone pmd doesn't flush the TLB
right away. do_huge_pmd_numa_page() flushes the TLB before calling
migrate_misplaced_transhuge_page(). By the time do_huge_pmd_numa_page()
runs some CPU could still access the page through the TLB.
change_huge_pmd() before arming the numa/protnone transhuge pmd calls
mmu_notifier_invalidate_range_start(). So there's no need of
mmu_notifier_invalidate_range_start()/mmu_notifier_invalidate_range_only_end()
sequence in migrate_misplaced_transhuge_page() too, because by the time
migrate_misplaced_transhuge_page() runs, the pmd mapping has already been
invalidated in the secondary MMUs. It has to or if a secondary MMU can
still write to the page, the migrate_page_copy() would lose data.
However an explicit mmu_notifier_invalidate_range() is needed before
migrate_misplaced_transhuge_page() starts copying the data of the
transhuge page or the below can happen for MMU notifier users sharing the
primary MMU pagetables and only implementing ->invalidate_range:
CPU0 CPU1 GPU sharing linux pagetables using
only ->invalidate_range
----------- ------------ ---------
GPU secondary MMU writes to the page
mapped by the transhuge pmd
change_pmd_range()
mmu..._range_start()
->invalidate_range_start() noop
change_huge_pmd()
set_pmd_at(numa/protnone)
pmd_unlock()
do_huge_pmd_numa_page()
CPU TLB flush globally (1)
CPU cannot write to page
migrate_misplaced_transhuge_page()
GPU writes to the page...
migrate_page_copy()
...GPU stops writing to the page
CPU TLB flush (2)
mmu..._range_end() (3)
->invalidate_range_stop() noop
->invalidate_range()
GPU secondary MMU is invalidated
and cannot write to the page anymore
(too late)
Just like we need a CPU TLB flush (1) because the TLB flush (2) arrives
too late, we also need a mmu_notifier_invalidate_range() before calling
migrate_misplaced_transhuge_page(), because the ->invalidate_range() in
(3) also arrives too late.
This requirement is the result of the lazy optimization in
change_huge_pmd() that releases the pmd_lock without first flushing the
TLB and without first calling mmu_notifier_invalidate_range().
Even converting the removed mmu_notifier_invalidate_range_only_end() into
a mmu_notifier_invalidate_range_end() would not have been enough to fix
this, because it run after migrate_page_copy().
After the hugepage data copy is done migrate_misplaced_transhuge_page()
can proceed and call set_pmd_at without having to flush the TLB nor any
secondary MMUs because the secondary MMU invalidate, just like the CPU TLB
flush, has to happen before the migrate_page_copy() is called or it would
be a bug in the first place (and it was for drivers using
->invalidate_range()).
KVM is unaffected because it doesn't implement ->invalidate_range().
The standard PAGE_SIZEd migrate_misplaced_page is less accelerated and
uses the generic migrate_pages which transitions the pte from
numa/protnone to a migration entry in try_to_unmap_one() and flushes TLBs
and all mmu notifiers there before copying the page.
Link: http://lkml.kernel.org/r/20181013002430.698-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Andrea Arcangeli
|
d7c3393413 |
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
Patch series "migrate_misplaced_transhuge_page race conditions". Aaron found a new instance of the THP MADV_DONTNEED race against pmdp_clear_flush* variants, that was apparently left unfixed. While looking into the race found by Aaron, I may have found two more issues in migrate_misplaced_transhuge_page. These race conditions would not cause kernel instability, but they'd corrupt userland data or leave data non zero after MADV_DONTNEED. I did only minor testing, and I don't expect to be able to reproduce this (especially the lack of ->invalidate_range before migrate_page_copy, requires the latest iommu hardware or infiniband to reproduce). The last patch is noop for x86 and it needs further review from maintainers of archs that implement flush_cache_range() (not in CC yet). To avoid confusion, it's not the first patch that introduces the bug fixed in the second patch, even before removing the pmdp_huge_clear_flush_notify, that _notify suffix was called after migrate_page_copy already run. This patch (of 3): This is a corollary of |
||
Clark Williams
|
026d1eaf5e |
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
The static lock quarantine_lock is used in quarantine.c to protect the quarantine queue datastructures. It is taken inside quarantine queue manipulation routines (quarantine_put(), quarantine_reduce() and quarantine_remove_cache()), with IRQs disabled. This is not a problem on a stock kernel but is problematic on an RT kernel where spin locks are sleeping spinlocks, which can sleep and can not be acquired with disabled interrupts. Convert the quarantine_lock to a raw spinlock_t. The usage of quarantine_lock is confined to quarantine.c and the work performed while the lock is held is used for debug purpose. [bigeasy@linutronix.de: slightly altered the commit message] Link: http://lkml.kernel.org/r/20181010214945.5owshc3mlrh74z4b@linutronix.de Signed-off-by: Clark Williams <williams@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Keith Busch
|
df06b37ffe |
mm/gup: cache dev_pagemap while pinning pages
Getting pages from ZONE_DEVICE memory needs to check the backing device's live-ness, which is tracked in the device's dev_pagemap metadata. This metadata is stored in a radix tree and looking it up adds measurable software overhead. This patch avoids repeating this relatively costly operation when dev_pagemap is used by caching the last dev_pagemap while getting user pages. The gup_benchmark kernel self test reports this reduces time to get user pages to as low as 1/3 of the previous time. Link: http://lkml.kernel.org/r/20181012173040.15669-1-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Pavel Tatashin
|
ec393a0f01 |
mm: return zero_resv_unavail optimization
When checking for valid pfns in zero_resv_unavail(), it is not necessary to verify that pfns within pageblock_nr_pages ranges are valid, only the first one needs to be checked. This is because memory for pages are allocated in contiguous chunks that contain pageblock_nr_pages struct pages. Link: http://lkml.kernel.org/r/20181002143821.5112-3-msys.mizuma@gmail.com Signed-off-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Naoya Horiguchi
|
907ec5fca3 |
mm: zero remaining unavailable struct pages
Patch series "mm: Fix for movable_node boot option", v3. This patch series contains a fix for the movable_node boot option issue which was introduced by commit |
||
|
Keith Busch
|
714a3a1eba |
mm/gup_benchmark.c: add additional pinning methods
Provide new gup benchmark ioctl commands to run different user page pinning methods, get_user_pages_longterm() and get_user_pages(), in addition to the existing get_user_pages_fast(). Link: http://lkml.kernel.org/r/20181010195605.10689-2-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Keith Busch
|
26db3d09d9 |
mm/gup_benchmark.c: time put_page()
We'd like to measure time to unpin user pages, so this adds a second benchmark timer on put_page, separate from get_page. Adding the field breaks this ioctl ABI, but should be okay since this an in-tree kernel selftest. [akpm@linux-foundation.org: add expansion to struct gup_benchmark for future use] Link: http://lkml.kernel.org/r/20181010195605.10689-1-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Roman Gushchin
|
7a1adfddaf |
mm: don't raise MEMCG_OOM event due to failed high-order allocation
It was reported that on some of our machines containers were restarted
with OOM symptoms without an obvious reason. Despite there were almost no
memory pressure and plenty of page cache, MEMCG_OOM event was raised
occasionally, causing the container management software to think, that OOM
has happened. However, no tasks have been killed.
The following investigation showed that the problem is caused by a failing
attempt to charge a high-order page. In such case, the OOM killer is
never invoked. As shown below, it can happen under conditions, which are
very far from a real OOM: e.g. there is plenty of clean page cache and no
memory pressure.
There is no sense in raising an OOM event in this case, as it might
confuse a user and lead to wrong and excessive actions (e.g. restart the
workload, as in my case).
Let's look at the charging path in try_charge(). If the memory usage is
about memory.max, which is absolutely natural for most memory cgroups, we
try to reclaim some pages. Even if we were able to reclaim enough memory
for the allocation, the following check can fail due to a race with
another concurrent allocation:
if (mem_cgroup_margin(mem_over_limit) >= nr_pages)
goto retry;
For regular pages the following condition will save us from triggering
the OOM:
if (nr_reclaimed && nr_pages <= (1 << PAGE_ALLOC_COSTLY_ORDER))
goto retry;
But for high-order allocation this condition will intentionally fail. The
reason behind is that we'll likely fall to regular pages anyway, so it's
ok and even preferred to return ENOMEM.
In this case the idea of raising MEMCG_OOM looks dubious.
Fix this by moving MEMCG_OOM raising to mem_cgroup_oom() after allocation
order check, so that the event won't be raised for high order allocations.
This change doesn't affect regular pages allocation and charging.
Link: http://lkml.kernel.org/r/20181004214050.7417-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Dave Chinner
|
64081362e8 |
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.
range_cyclic
writeback Process 1 Process 2
xfs_vm_writepages
write_cache_pages
writeback_index = 2
cycled = 0
....
find page 2 dirty
lock Page 2
->writepage
page 2 writeback
page 2 clean
page 2 added to bio
no more pages
write()
locks page 1
dirties page 1
locks page 2
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
start index 0
find page 1 towrite
lock Page 1
->writepage
page 1 writeback
page 1 clean
page 1 added to bio
find page 2 towrite
lock Page 2
page 2 is writeback
<blocks>
write()
locks page 1
dirties page 1
fsync()
....
xfs_vm_writepages
write_cache_pages
start index 0
!done && !cycled
sets index to 0, restarts lookup
find page 1 dirty
find page 1 towrite
lock Page 1
page 1 is writeback
<blocks>
lock Page 1
<blocks>
DEADLOCK because:
- process 1 needs page 2 writeback to complete to make
enough progress to issue IO pending for page 1
- writeback needs page 1 writeback to complete so process 2
can progress and unlock the page it is blocked on, then it
can issue the IO pending for page 2
- process 2 can't make progress until process 1 issues IO
for page 1
The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages(). The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.
generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.
However:
mpage_writepages() has a private bio context,
exofs_writepages() has page_collect
fuse_writepages() has fuse_fill_wb_data
nfs_writepages() has nfs_pageio_descriptor
xfs_vm_writepages() has xfs_writepage_ctx
All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.
Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock. I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much. I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.
There's a few ways I can see avoid this deadlock. There's probably more,
but these are the first I've though of:
1. get rid of range_cyclic altogether
2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()
2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation
3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer
3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.
I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.
#2 is simple, and I don't think it will have any impact on
performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.
#2a is pretty much "status quo without the deadlock". Moving the
retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.
#3 is really just a band-aid - it doesn't fix the access/wait
inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.
#3a is really an optimisation that just so happens to include the
band-aid fix of #3.
So it seems that the simplest way to fix this issue is to implement
solution #2
Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Pavel Tatashin
|
a9a9e77fbf |
mm: move mirrored memory specific code outside of memmap_init_zone
memmap_init_zone, is getting complex, because it is called from different contexts: hotplug, and during boot, and also because it must handle some architecture quirks. One of them is mirrored memory. Move the code that decides whether to skip mirrored memory outside of memmap_init_zone, into a separate function. [pasha.tatashin@oracle.com: uninline overlap_memmap_init()] Link: http://lkml.kernel.org/r/20180726193509.3326-4-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180724235520.10200-4-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pavel Tatashin
|
d3035be4ce |
mm: calculate deferred pages after skipping mirrored memory
update_defer_init() should be called only when struct page is about to be initialized. Because it counts number of initialized struct pages, but there we may skip struct pages if there is some mirrored memory. So move, update_defer_init() after checking for mirrored memory. Also, rename update_defer_init() to defer_init() and reverse the return boolean to emphasize that this is a boolean function, that tells that the reset of memmap initialization should be deferred. Make this function self-contained: do not pass number of already initialized pages in this zone by using static counters. I found this bug by reading the code. The effect is that fewer than expected struct pages are initialized early in boot, and it is possible that in some corner cases we may fail to boot when mirrored pages are used. The deferred on demand code should somewhat mitigate this. But this still brings some inconsistencies compared to when booting without mirrored pages, so it is better to fix. [pasha.tatashin@oracle.com: add comment about defer_init's lack of locking] Link: http://lkml.kernel.org/r/20180726193509.3326-3-pasha.tatashin@oracle.com [akpm@linux-foundation.org: make defer_init non-inline, __meminit] Link: http://lkml.kernel.org/r/20180724235520.10200-3-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Pavel Tatashin
|
dfb3ccd00a |
mm: make memmap_init a proper function
memmap_init is sometimes a macro sometimes a function based on __HAVE_ARCH_MEMMAP_INIT. It is only a function on ia64. Make memmap_init a weak function instead, and let ia64 redefine it. Link: http://lkml.kernel.org/r/20180724235520.10200-2-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill Tkhai
|
1c2d479a11 |
mm/memcontrol.c: convert mem_cgroup_id::ref to refcount_t type
This will allow to use generic refcount_t interfaces to check counters overflow instead of currently existing VM_BUG_ON(). The only difference after the patch is VM_BUG_ON() may cause BUG(), while refcount_t fires with WARN(). But this seems not to be significant here, since such the problems are usually caught by syzbot with panic-on-warn enabled. Link: http://lkml.kernel.org/r/153910718919.7006.13400779039257185427.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Rientjes
|
4a222127f3 |
mm/page_alloc.c: initialize num_movable in move_freepages()
If move_freepages_block() returns 0 because !zone_spans_pfn(), *num_movable can hold the value from the stack because it does not get initialized in move_freepages(). Move the initialization to move_freepages_block() to guarantee the value actually makes sense. This currently doesn't affect its only caller where num_movable != NULL, so no bug fix, but just more robust. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1810051355490.212229@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Gustavo A. R. Silva
|
61855f021c |
mm/zsmalloc.c: fix fall-through annotation
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Link: http://lkml.kernel.org/r/20181003105114.GA24423@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jann Horn
|
f0ecf25a09 |
mm/vmstat.c: assert that vmstat_text is in sync with stat_items_size
Having two gigantic arrays that must manually be kept in sync, including ifdefs, isn't exactly robust. To make it easier to catch such issues in the future, add a BUILD_BUG_ON(). Link: http://lkml.kernel.org/r/20181001143138.95119-3-jannh@google.com Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Kemi Wang <kemi.wang@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Aneesh Kumar K.V
|
ff09d7ec97 |
mm/memory.c: recheck page table entry with page table lock held
We clear the pte temporarily during read/modify/write update of the pte. If we take a page fault while the pte is cleared, the application can get SIGBUS. One such case is with remap_pfn_range without a backing vm_ops->fault callback. do_fault will return SIGBUS in that case. cpu 0 cpu1 mprotect() ptep_modify_prot_start()/pte cleared. . . page fault. . . prep_modify_prot_commit() Fix this by taking page table lock and rechecking for pte_none. [aneesh.kumar@linux.ibm.com: fix crash observed with syzkaller run] Link: http://lkml.kernel.org/r/87va6bwlfg.fsf@linux.ibm.com Link: http://lkml.kernel.org/r/20180926031858.9692-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ido Schimmel <idosch@idosch.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yang Shi
|
9bc8039e71 |
mm: brk: downgrade mmap_sem to read when shrinking
brk might be used to shrink memory mapping too other than munmap(). So,
it may hold write mmap_sem for long time when shrinking large mapping, as
what commit ("mm: mmap: zap pages with read mmap_sem in munmap")
described.
The brk() will not manipulate vmas anymore after __do_munmap() call for
the mapping shrink use case. But, it may set mm->brk after __do_munmap(),
which needs hold write mmap_sem.
However, a simple trick can workaround this by setting mm->brk before
__do_munmap(). Then restore the original value if __do_munmap() fails.
With this trick, it is safe to downgrade to read mmap_sem.
So, the same optimization, which downgrades mmap_sem to read for zapping
pages, is also feasible and reasonable to this case.
The period of holding exclusive mmap_sem for shrinking large mapping would
be reduced significantly with this optimization.
[akpm@linux-foundation.org: tweak comment]
[yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue]
Link: http://lkml.kernel.org/r/1538687672-17795-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1538067582-60038-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Yang Shi
|
85a06835f6 |
mm: mremap: downgrade mmap_sem to read when shrinking
Other than munmap, mremap might be used to shrink memory mapping too.
So, it may hold write mmap_sem for long time when shrinking large
mapping, as what commit ("mm: mmap: zap pages with read mmap_sem in
munmap") described.
The mremap() will not manipulate vmas anymore after __do_munmap() call for
the mapping shrink use case, so it is safe to downgrade to read mmap_sem.
So, the same optimization, which downgrades mmap_sem to read for zapping
pages, is also feasible and reasonable to this case.
The period of holding exclusive mmap_sem for shrinking large mapping
would be reduced significantly with this optimization.
MREMAP_FIXED and MREMAP_MAYMOVE are more complicated to adopt this
optimization since they need manipulate vmas after do_munmap(),
downgrading mmap_sem may create race window.
Simple mapping shrink is the low hanging fruit, and it may cover the
most cases of unmap with munmap together.
[akpm@linux-foundation.org: tweak comment]
[yang.shi@linux.alibaba.com: fix unsigned compare against 0 issue]
Link: http://lkml.kernel.org/r/1538687672-17795-2-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1538067582-60038-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Souptick Joarder
|
3c0513243a |
mm/filemap.c: use vmf_error()
These codes can be replaced with new inline vmf_error(). Link: http://lkml.kernel.org/r/20180927171411.GA23331@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wei Yang
|
d4faa40259 |
mm: remove unnecessary local variable addr in __get_user_pages_fast()
The local variable `addr' in __get_user_pages_fast() is just a shadow of `start'. Since `start' never changes after assignment to `addr', it is fine to replace `start' with it. Also the meaning of [start, end] is more obvious than [addr, end] when passed to gup_pgd_range(). Link: http://lkml.kernel.org/r/20180925021448.20265-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexander Duyck
|
966cf44f63 |
mm: defer ZONE_DEVICE page initialization to the point where we init pgmap
The ZONE_DEVICE pages were being initialized in two locations. One was with the memory_hotplug lock held and another was outside of that lock. The problem with this is that it was nearly doubling the memory initialization time. Instead of doing this twice, once while holding a global lock and once without, I am opting to defer the initialization to the one outside of the lock. This allows us to avoid serializing the overhead for memory init and we can instead focus on per-node init times. One issue I encountered is that devm_memremap_pages and hmm_devmmem_pages_create were initializing only the pgmap field the same way. One wasn't initializing hmm_data, and the other was initializing it to a poison value. Since this is something that is exposed to the driver in the case of hmm I am opting for a third option and just initializing hmm_data to 0 since this is going to be exposed to unknown third party drivers. [alexander.h.duyck@linux.intel.com: fix reference count for pgmap in devm_memremap_pages] Link: http://lkml.kernel.org/r/20181008233404.1909.37302.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/20180925202053.3576.66039.stgit@localhost.localdomain Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexander Duyck
|
d483da5bc7 |
mm: create non-atomic version of SetPageReserved for init use
It doesn't make much sense to use the atomic SetPageReserved at init time
when we are using memset to clear the memory and manipulating the page
flags via simple "&=" and "|=" operations in __init_single_page.
This patch adds a non-atomic version __SetPageReserved that can be used
during page init and shows about a 10% improvement in initialization times
on the systems I have available for testing. On those systems I saw
initialization times drop from around 35 seconds to around 32 seconds to
initialize a 3TB block of persistent memory. I believe the main advantage
of this is that it allows for more compiler optimization as the __set_bit
operation can be reordered whereas the atomic version cannot.
I tried adding a bit of documentation based on
|
||
|
Alexander Duyck
|
f682a97a00 |
mm: provide kernel parameter to allow disabling page init poisoning
Patch series "Address issues slowing persistent memory initialization", v5. The main thing this patch set achieves is that it allows us to initialize each node worth of persistent memory independently. As a result we reduce page init time by about 2 minutes because instead of taking 30 to 40 seconds per node and going through each node one at a time, we process all 4 nodes in parallel in the case of a 12TB persistent memory setup spread evenly over 4 nodes. This patch (of 3): On systems with a large amount of memory it can take a significant amount of time to initialize all of the page structs with the PAGE_POISON_PATTERN value. I have seen it take over 2 minutes to initialize a system with over 12TB of RAM. In order to work around the issue I had to disable CONFIG_DEBUG_VM and then the boot time returned to something much more reasonable as the arch_add_memory call completed in milliseconds versus seconds. However in doing that I had to disable all of the other VM debugging on the system. In order to work around a kernel that might have CONFIG_DEBUG_VM enabled on a system that has a large amount of memory I have added a new kernel parameter named "vm_debug" that can be set to "-" in order to disable it. Link: http://lkml.kernel.org/r/20180925201921.3576.84239.stgit@localhost.localdomain Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Shakeel Butt
|
85cfb24506 |
memcg: remove memcg_kmem_skip_account
The flag memcg_kmem_skip_account was added during the era of opt-out kmem accounting. There is no need for such flag in the opt-in world as there aren't any __GFP_ACCOUNT allocations within memcg_create_cache_enqueue(). Link: http://lkml.kernel.org/r/20180919004501.178023-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Oscar Salvador
|
86b27beae5 |
mm/memory_hotplug.c: clean up node_states_check_changes_offline()
This patch, as the previous one, gets rid of the wrong if statements.
While at it, I realized that the comments are sometimes very confusing,
to say the least, and wrong.
For example:
___
zone_last = ZONE_MOVABLE;
/*
* check whether node_states[N_HIGH_MEMORY] will be changed
* If we try to offline the last present @nr_pages from the node,
* we can determind we will need to clear the node from
* node_states[N_HIGH_MEMORY].
*/
for (; zt <= zone_last; zt++)
present_pages += pgdat->node_zones[zt].present_pages;
if (nr_pages >= present_pages)
arg->status_change_nid = zone_to_nid(zone);
else
arg->status_change_nid = -1;
___
In case the node gets empry, it must be removed from N_MEMORY. We already
check N_HIGH_MEMORY a bit above within the CONFIG_HIGHMEM ifdef code. Not
to say that status_change_nid is for N_MEMORY, and not for N_HIGH_MEMORY.
So I re-wrote some of the comments to what I think is better.
[osalvador@suse.de: address feedback from Pavel]
Link: http://lkml.kernel.org/r/20180921132634.10103-5-osalvador@techadventures.net
Link: http://lkml.kernel.org/r/20180919100819.25518-6-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Oscar Salvador
|
8efe33f40f |
mm/memory_hotplug.c: simplify node_states_check_changes_online
While looking at node_states_check_changes_online, I stumbled upon some
confusing things.
Right after entering the function, we find this:
if (N_MEMORY == N_NORMAL_MEMORY)
zone_last = ZONE_MOVABLE;
This is wrong.
N_MEMORY cannot really be equal to N_NORMAL_MEMORY.
My guess is that this wanted to be something like:
if (N_NORMAL_MEMORY == N_HIGH_MEMORY)
to check if we have CONFIG_HIGHMEM.
Later on, in the CONFIG_HIGHMEM block, we have:
if (N_MEMORY == N_HIGH_MEMORY)
zone_last = ZONE_MOVABLE;
Again, this is wrong, and will never be evaluated to true.
Besides removing these wrong if statements, I simplified the function a
bit.
[osalvador@suse.de: address feedback from Pavel]
Link: http://lkml.kernel.org/r/20180921132634.10103-4-osalvador@techadventures.net
Link: http://lkml.kernel.org/r/20180919100819.25518-5-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Oscar Salvador
|
cf01f6f5e3 |
mm/memory_hotplug.c: tidy up node_states_clear_node()
node_states_clear has the following if statements:
if ((N_MEMORY != N_NORMAL_MEMORY) &&
(arg->status_change_nid_high >= 0))
...
if ((N_MEMORY != N_HIGH_MEMORY) &&
(arg->status_change_nid >= 0))
...
N_MEMORY can never be equal to neither N_NORMAL_MEMORY nor
N_HIGH_MEMORY.
Similar problem was found in [1].
Since this is wrong, let us get rid of it.
[1] https://patchwork.kernel.org/patch/10579155/
Link: http://lkml.kernel.org/r/20180919100819.25518-4-osalvador@techadventures.net
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Oscar Salvador
|
83d83612d7 |
mm/memory_hotplug.c: spare unnecessary calls to node_set_state
In node_states_check_changes_online, we check if the node will have to be set for any of the N_*_MEMORY states after the pages have been onlined. Later on, we perform the activation in node_states_set_node. Currently, in node_states_set_node we set the node to N_MEMORY unconditionally. This means that we call node_set_state for N_MEMORY every time pages go online, but we only need to do it if the node has not yet been set for N_MEMORY. Fix this by checking status_change_nid. Link: http://lkml.kernel.org/r/20180919100819.25518-2-osalvador@techadventures.net Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <yasu.isimatu@gmail.com> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
haiqing.shq
|
3cb7b121ff |
mm/filemap.c: Use existing variable
Use the variable write_len instead of ov_iter_count(from). Link: http://lkml.kernel.org/r/1537375855-2088-1-git-send-email-leviathan0992@gmail.com Signed-off-by: haiqing.shq <leviathan0992@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang Shi
|
cb4922496a |
mm: unmap VM_PFNMAP mappings with optimized path
When unmapping VM_PFNMAP mappings, vm flags need to be updated. Since the vmas have been detached, so it sounds safe to update vm flags with read mmap_sem. Link: http://lkml.kernel.org/r/1537376621-51150-4-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang Shi
|
b4cefb3605 |
mm: unmap VM_HUGETLB mappings with optimized path
When unmapping VM_HUGETLB mappings, vm flags need to be updated. Since the vmas have been detached, so it sounds safe to update vm flags with read mmap_sem. Link: http://lkml.kernel.org/r/1537376621-51150-3-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang Shi
|
dd2283f260 |
mm: mmap: zap pages with read mmap_sem in munmap
Patch series "mm: zap pages with read mmap_sem in munmap for large mapping", v11. Background: Recently, when we ran some vm scalability tests on machines with large memory, we ran into a couple of mmap_sem scalability issues when unmapping large memory space, please refer to https://lkml.org/lkml/2017/12/14/733 and https://lkml.org/lkml/2018/2/20/576. History: Then akpm suggested to unmap large mapping section by section and drop mmap_sem at a time to mitigate it (see https://lkml.org/lkml/2018/3/6/784). V1 patch series was submitted to the mailing list per Andrew's suggestion (see https://lkml.org/lkml/2018/3/20/786). Then I received a lot great feedback and suggestions. Then this topic was discussed on LSFMM summit 2018. In the summit, Michal Hocko suggested (also in the v1 patches review) to try "two phases" approach. Zapping pages with read mmap_sem, then doing via cleanup with write mmap_sem (for discussion detail, see https://lwn.net/Articles/753269/) Approach: Zapping pages is the most time consuming part, according to the suggestion from Michal Hocko [1], zapping pages can be done with holding read mmap_sem, like what MADV_DONTNEED does. Then re-acquire write mmap_sem to cleanup vmas. But, we can't call MADV_DONTNEED directly, since there are two major drawbacks: * The unexpected state from PF if it wins the race in the middle of munmap. It may return zero page, instead of the content or SIGSEGV. * Can't handle VM_LOCKED | VM_HUGETLB | VM_PFNMAP and uprobe mappings, which is a showstopper from akpm But, some part may need write mmap_sem, for example, vma splitting. So, the design is as follows: acquire write mmap_sem lookup vmas (find and split vmas) deal with special mappings detach vmas downgrade_write zap pages free page tables release mmap_sem The vm events with read mmap_sem may come in during page zapping, but since vmas have been detached before, they, i.e. page fault, gup, etc, will not be able to find valid vma, then just return SIGSEGV or -EFAULT as expected. If the vma has VM_HUGETLB | VM_PFNMAP, they are considered as special mappings. They will be handled by falling back to regular do_munmap() with exclusive mmap_sem held in this patch since they may update vm flags. But, with the "detach vmas first" approach, the vmas have been detached when vm flags are updated, so it sounds safe to update vm flags with read mmap_sem for this specific case. So, VM_HUGETLB and VM_PFNMAP will be handled by using the optimized path in the following separate patches for bisectable sake. Unmapping uprobe areas may need update mm flags (MMF_RECALC_UPROBES). However it is fine to have false-positive MMF_RECALC_UPROBES according to uprobes developer. So, uprobe unmap will not be handled by the regular path. With the "detach vmas first" approach we don't have to re-acquire mmap_sem again to clean up vmas to avoid race window which might get the address space changed since downgrade_write() doesn't release the lock to lead regression, which simply downgrades to read lock. And, since the lock acquire/release cost is managed to the minimum and almost as same as before, the optimization could be extended to any size of mapping without incurring significant penalty to small mappings. For the time being, just do this in munmap syscall path. Other vm_munmap() or do_munmap() call sites (i.e mmap, mremap, etc) remain intact due to some implementation difficulties since they acquire write mmap_sem from very beginning and hold it until the end, do_munmap() might be called in the middle. But, the optimized do_munmap would like to be called without mmap_sem held so that we can do the optimization. So, if we want to do the similar optimization for mmap/mremap path, I'm afraid we would have to redesign them. mremap might be called on very large area depending on the usecases, the optimization to it will be considered in the future. This patch (of 3): When running some mmap/munmap scalability tests with large memory (i.e. > 300GB), the below hung task issue may happen occasionally. INFO: task ps:14018 blocked for more than 120 seconds. Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ps D 0 14018 1 0x00000004 ffff885582f84000 ffff885e8682f000 ffff880972943000 ffff885ebf499bc0 ffff8828ee120000 ffffc900349bfca8 ffffffff817154d0 0000000000000040 00ffffff812f872a ffff885ebf499bc0 024000d000948300 ffff880972943000 Call Trace: [<ffffffff817154d0>] ? __schedule+0x250/0x730 [<ffffffff817159e6>] schedule+0x36/0x80 [<ffffffff81718560>] rwsem_down_read_failed+0xf0/0x150 [<ffffffff81390a28>] call_rwsem_down_read_failed+0x18/0x30 [<ffffffff81717db0>] down_read+0x20/0x40 [<ffffffff812b9439>] proc_pid_cmdline_read+0xd9/0x4e0 [<ffffffff81253c95>] ? do_filp_open+0xa5/0x100 [<ffffffff81241d87>] __vfs_read+0x37/0x150 [<ffffffff812f824b>] ? security_file_permission+0x9b/0xc0 [<ffffffff81242266>] vfs_read+0x96/0x130 [<ffffffff812437b5>] SyS_read+0x55/0xc0 [<ffffffff8171a6da>] entry_SYSCALL_64_fastpath+0x1a/0xc5 It is because munmap holds mmap_sem exclusively from very beginning to all the way down to the end, and doesn't release it in the middle. When unmapping large mapping, it may take long time (take ~18 seconds to unmap 320GB mapping with every single page mapped on an idle machine). Zapping pages is the most time consuming part, according to the suggestion from Michal Hocko [1], zapping pages can be done with holding read mmap_sem, like what MADV_DONTNEED does. Then re-acquire write mmap_sem to cleanup vmas. But, some part may need write mmap_sem, for example, vma splitting. So, the design is as follows: acquire write mmap_sem lookup vmas (find and split vmas) deal with special mappings detach vmas downgrade_write zap pages free page tables release mmap_sem The vm events with read mmap_sem may come in during page zapping, but since vmas have been detached before, they, i.e. page fault, gup, etc, will not be able to find valid vma, then just return SIGSEGV or -EFAULT as expected. If the vma has VM_HUGETLB | VM_PFNMAP, they are considered as special mappings. They will be handled by without downgrading mmap_sem in this patch since they may update vm flags. But, with the "detach vmas first" approach, the vmas have been detached when vm flags are updated, so it sounds safe to update vm flags with read mmap_sem for this specific case. So, VM_HUGETLB and VM_PFNMAP will be handled by using the optimized path in the following separate patches for bisectable sake. Unmapping uprobe areas may need update mm flags (MMF_RECALC_UPROBES). However it is fine to have false-positive MMF_RECALC_UPROBES according to uprobes developer. With the "detach vmas first" approach we don't have to re-acquire mmap_sem again to clean up vmas to avoid race window which might get the address space changed since downgrade_write() doesn't release the lock to lead regression, which simply downgrades to read lock. And, since the lock acquire/release cost is managed to the minimum and almost as same as before, the optimization could be extended to any size of mapping without incurring significant penalty to small mappings. For the time being, just do this in munmap syscall path. Other vm_munmap() or do_munmap() call sites (i.e mmap, mremap, etc) remain intact due to some implementation difficulties since they acquire write mmap_sem from very beginning and hold it until the end, do_munmap() might be called in the middle. But, the optimized do_munmap would like to be called without mmap_sem held so that we can do the optimization. So, if we want to do the similar optimization for mmap/mremap path, I'm afraid we would have to redesign them. mremap might be called on very large area depending on the usecases, the optimization to it will be considered in the future. With the patches, exclusive mmap_sem hold time when munmap a 80GB address space on a machine with 32 cores of E5-2680 @ 2.70GHz dropped to us level from second. munmap_test-15002 [008] 594.380138: funcgraph_entry: | __vm_munmap() { munmap_test-15002 [008] 594.380146: funcgraph_entry: !2485684 us | unmap_region(); munmap_test-15002 [008] 596.865836: funcgraph_exit: !2485692 us | } Here the execution time of unmap_region() is used to evaluate the time of holding read mmap_sem, then the remaining time is used with holding exclusive lock. [1] https://lwn.net/Articles/753269/ Link: http://lkml.kernel.org/r/1537376621-51150-2-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>Suggested-by: Michal Hocko <mhocko@kernel.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrey Ryabinin
|
a8dda165ec |
vfree: add debug might_sleep()
Add might_sleep() call to vfree() to catch potential sleep-in-atomic bugs earlier. [aryabinin@virtuozzo.com: drop might_sleep_if() from kvfree()] Link: http://lkml.kernel.org/r/7e19e4df-b1a6-29bd-9ae7-0266d50bef1d@virtuozzo.com Link: http://lkml.kernel.org/r/20180914130512.10394-3-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Ryabinin
|
3ca4ea3a7a |
mm/vmalloc.c: improve vfree() kerneldoc
vfree() might sleep if called not in interrupt context. Explain that in the comment. Link: http://lkml.kernel.org/r/20180914130512.10394-2-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Ryabinin
|
52414d3302 |
kvfree(): fix misleading comment
vfree() might sleep if called not in interrupt context. So does kvfree()
too. Fix misleading kvfree()'s comment about allowed context.
Link: http://lkml.kernel.org/r/20180914130512.10394-1-aryabinin@virtuozzo.com
Fixes:
|
||
zhong jiang
|
dedf2c73b8 |
mm/mempolicy.c: use match_string() helper to simplify the code
match_string() returns the index of an array for a matching string, which can be used intead of open coded implementation. Link: http://lkml.kernel.org/r/1536988365-50310-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
YueHaibing
|
c3df29d130 |
mm/swap.c: remove duplicated include
Remove duplicated include linux/memremap.h Link: http://lkml.kernel.org/r/20180917131308.16420-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
2c029a1ea3 |
mm, page_alloc: drop should_suppress_show_mem
should_suppress_show_mem() was introduced to reduce the overhead of
show_mem on large NUMA systems. Things have changed since then though.
Namely
|
||
Johannes Weiner
|
e9b257ed15 |
mm/memcontrol.c: fix memory.stat item ordering
The refault stats go better with the page fault stats, and are of higher interest than the stats on LRU operations. In fact they used to be grouped together; when the LRU operation stats were added later on, they were wedged in between. Move them back together. Documentation/admin-guide/cgroup-v2.rst already lists them in the right order. Link: http://lkml.kernel.org/r/20181010140239.GA2527@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
4b85afbdac |
mm: zero-seek shrinkers
The page cache and most shrinkable slab caches hold data that has been read from disk, but there are some caches that only cache CPU work, such as the dentry and inode caches of procfs and sysfs, as well as the subset of radix tree nodes that track non-resident page cache. Currently, all these are shrunk at the same rate: using DEFAULT_SEEKS for the shrinker's seeks setting tells the reclaim algorithm that for every two page cache pages scanned it should scan one slab object. This is a bogus setting. A virtual inode that required no IO to create is not twice as valuable as a page cache page; shadow cache entries with eviction distances beyond the size of memory aren't either. In most cases, the behavior in practice is still fine. Such virtual caches don't tend to grow and assert themselves aggressively, and usually get picked up before they cause problems. But there are scenarios where that's not true. Our database workloads suffer from two of those. For one, their file workingset is several times bigger than available memory, which has the kernel aggressively create shadow page cache entries for the non-resident parts of it. The workingset code does tell the VM that most of these are expendable, but the VM ends up balancing them 2:1 to cache pages as per the seeks setting. This is a huge waste of memory. These workloads also deal with tens of thousands of open files and use /proc for introspection, which ends up growing the proc_inode_cache to absurdly large sizes - again at the cost of valuable cache space, which isn't a reasonable trade-off, given that proc inodes can be re-created without involving the disk. This patch implements a "zero-seek" setting for shrinkers that results in a target ratio of 0:1 between their objects and IO-backed caches. This allows such virtual caches to grow when memory is available (they do cache/avoid CPU work after all), but effectively disables them as soon as IO-backed objects are under pressure. It then switches the shrinkers for procfs and sysfs metadata, as well as excess page cache shadow nodes, to the new zero-seek setting. Link: http://lkml.kernel.org/r/20181009184732.762-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Domas Mituzas <dmituzas@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
68d48e6a2d |
mm: workingset: add vmstat counter for shadow nodes
Make it easier to catch bugs in the shadow node shrinker by adding a counter for the shadow nodes in circulation. [akpm@linux-foundation.org: assert that irqs are disabled, for __inc_lruvec_page_state()] [akpm@linux-foundation.org: s/WARN_ON_ONCE/VM_WARN_ON_ONCE/, per Johannes] Link: http://lkml.kernel.org/r/20181009184732.762-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
505802a535 |
mm: workingset: use cheaper __inc_lruvec_state in irqsafe node reclaim
No need to use the preemption-safe lruvec state function inside the reclaim region that has irqs disabled. Link: http://lkml.kernel.org/r/20181009184732.762-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johannes Weiner
|
eb414681d5 |
psi: pressure stall information for CPU, memory, and IO
When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills. In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.
In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.
A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively. Stall states are aggregate versions of the per-task delay
accounting delays:
cpu: some tasks are runnable but not executing on a CPU
memory: tasks are reclaiming, or waiting for swapin or thrashing cache
io: tasks are waiting for io completions
These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit. They can also indicate when the system
is approaching lockup scenarios and OOMs.
To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states. Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime. A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).
[hannes@cmpxchg.org: doc fixlet, per Randy]
Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Johannes Weiner
|
b1d29ba82c |
delayacct: track delays from thrashing cache pages
Delay accounting already measures the time a task spends in direct reclaim
and waiting for swapin, but in low memory situations tasks spend can spend
a significant amount of their time waiting on thrashing page cache. This
isn't tracked right now.
To know the full impact of memory contention on an individual task,
measure the delay when waiting for a recently evicted active cache page to
read back into memory.
Also update tools/accounting/getdelays.c:
[hannes@computer accounting]$ sudo ./getdelays -d -p 1
print delayacct stats ON
PID 1
CPU count real total virtual total delay total delay average
50318 745000000 847346785 400533713 0.008ms
IO count delay total delay average
435 122601218 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
0 0 0ms
THRASHING count delay total delay average
19 12621439 0ms
Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Johannes Weiner
|
1899ad18c6 |
mm: workingset: tell cache transitions from workingset thrashing
Refaults happen during transitions between workingsets as well as in-place thrashing. Knowing the difference between the two has a range of applications, including measuring the impact of memory shortage on the system performance, as well as the ability to smarter balance pressure between the filesystem cache and the swap-backed workingset. During workingset transitions, inactive cache refaults and pushes out established active cache. When that active cache isn't stale, however, and also ends up refaulting, that's bonafide thrashing. Introduce a new page flag that tells on eviction whether the page has been active or not in its lifetime. This bit is then stored in the shadow entry, to classify refaults as transitioning or thrashing. How many page->flags does this leave us with on 32-bit? 20 bits are always page flags 21 if you have an MMU 23 with the zone bits for DMA, Normal, HighMem, Movable 29 with the sparsemem section bits 30 if PAE is enabled 31 with this patch. So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes. If that's not enough, the system can switch to discontigmem and re-gain the 6 or 7 sparsemem section bits. Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
95f9ab2d59 |
mm: workingset: don't drop refault information prematurely
Patch series "psi: pressure stall information for CPU, memory, and IO", v4. Overview PSI reports the overall wallclock time in which the tasks in a system (or cgroup) wait for (contended) hardware resources. This helps users understand the resource pressure their workloads are under, which allows them to rootcause and fix throughput and latency problems caused by overcommitting, underprovisioning, suboptimal job placement in a grid; as well as anticipate major disruptions like OOM. Real-world applications We're using the data collected by PSI (and its previous incarnation, memdelay) quite extensively at Facebook, and with several success stories. One usecase is avoiding OOM hangs/livelocks. The reason these happen is because the OOM killer is triggered by reclaim not being able to free pages, but with fast flash devices there is *always* some clean and uptodate cache to reclaim; the OOM killer never kicks in, even as tasks spend 90% of the time thrashing the cache pages of their own executables. There is no situation where this ever makes sense in practice. We wrote a <100 line POC python script to monitor memory pressure and kill stuff way before such pathological thrashing leads to full system losses that would require forcible hard resets. We've since extended and deployed this code into other places to guarantee latency and throughput SLAs, since they're usually violated way before the kernel OOM killer would ever kick in. It is available here: https://github.com/facebookincubator/oomd Eventually we probably want to trigger the in-kernel OOM killer based on extreme sustained pressure as well, so that Linux can avoid memory livelocks - which technically aren't deadlocks, but to the user indistinguishable from them - out of the box. We'd continue using OOMD as the first line of defense to ensure workload health and implement complex kill policies that are beyond the scope of the kernel. We also use PSI memory pressure for loadshedding. Our batch job infrastructure used to use heuristics based on various VM stats to anticipate OOM situations, with lackluster success. We switched it to PSI and managed to anticipate and avoid OOM kills and lockups fairly reliably. The reduction of OOM outages in the worker pool raised the pool's aggregate productivity, and we were able to switch that service to smaller machines. Lastly, we use cgroups to isolate a machine's main workload from maintenance crap like package upgrades, logging, configuration, as well as to prevent multiple workloads on a machine from stepping on each others' toes. We were not able to configure this properly without the pressure metrics; we would see latency or bandwidth drops, but it would often be hard to impossible to rootcause it post-mortem. We now log and graph pressure for the containers in our fleet and can trivially link latency spikes and throughput drops to shortages of specific resources after the fact, and fix the job config/scheduling. PSI has also received testing, feedback, and feature requests from Android and EndlessOS for the purpose of low-latency OOM killing, to intervene in pressure situations before the UI starts hanging. How do you use this feature? A kernel with CONFIG_PSI=y will create a /proc/pressure directory with 3 files: cpu, memory, and io. If using cgroup2, cgroups will also have cpu.pressure, memory.pressure and io.pressure files, which simply aggregate task stalls at the cgroup level instead of system-wide. The cpu file contains one line: some avg10=2.04 avg60=0.75 avg300=0.40 total=157656722 The averages give the percentage of walltime in which one or more tasks are delayed on the runqueue while another task has the CPU. They're recent averages over 10s, 1m, 5m windows, so you can tell short term trends from long term ones, similarly to the load average. The total= value gives the absolute stall time in microseconds. This allows detecting latency spikes that might be too short to sway the running averages. It also allows custom time averaging in case the 10s/1m/5m windows aren't adequate for the usecase (or are too coarse with future hardware). What to make of this "some" metric? If CPU utilization is at 100% and CPU pressure is 0, it means the system is perfectly utilized, with one runnable thread per CPU and nobody waiting. At two or more runnable tasks per CPU, the system is 100% overcommitted and the pressure average will indicate as much. From a utilization perspective this is a great state of course: no CPU cycles are being wasted, even when 50% of the threads were to go idle (as most workloads do vary). From the perspective of the individual job it's not great, however, and they would do better with more resources. Depending on what your priority and options are, raised "some" numbers may or may not require action. The memory file contains two lines: some avg10=70.24 avg60=68.52 avg300=69.91 total=3559632828 full avg10=57.59 avg60=58.06 avg300=60.38 total=3300487258 The some line is the same as for cpu, the time in which at least one task is stalled on the resource. In the case of memory, this includes waiting on swap-in, page cache refaults and page reclaim. The full line, however, indicates time in which *nobody* is using the CPU productively due to pressure: all non-idle tasks are waiting for memory in one form or another. Significant time spent in there is a good trigger for killing things, moving jobs to other machines, or dropping incoming requests, since neither the jobs nor the machine overall are making too much headway. The io file is similar to memory. Because the block layer doesn't have a concept of hardware contention right now (how much longer is my IO request taking due to other tasks?), it reports CPU potential lost on all IO delays, not just the potential lost due to competition. FAQ Q: How is PSI's CPU component different from the load average? A: There are several quirks in the load average that make it hard to impossible to tell how overcommitted the CPU really is. 1. The load average is reported as a raw number of active tasks. You need to know how many CPUs there are in the system, how many CPUs the workload is allowed to use, then think about what the proportion between load and the number of CPUs mean for the tasks trying to run. PSI reports the percentage of wallclock time in which tasks are waiting for a CPU to run on. It doesn't matter how many CPUs are present or usable. The number always tells the quality of life of tasks in the system or in a particular cgroup. 2. The shortest averaging window is 1m, which is extremely coarse, and it's sampled in 5s intervals. A *lot* can happen on a CPU in 5 seconds. This *may* be able to identify persistent long-term trends and very clear and obvious overloads, but it's unusable for latency spikes and more subtle overutilization. PSI's shortest window is 10s. It also exports the cumulative stall times (in microseconds) of synchronously recorded events. 3. On Linux, the load average for historical reasons includes all TASK_UNINTERRUPTIBLE tasks. This gives a broader sense of how busy the system is, but on the flipside it doesn't distinguish whether tasks are likely to contend over the CPU or IO - which obviously requires very different interventions from a sys admin or a job scheduler. PSI reports independent metrics for CPU and IO. You can tell which resource is making the tasks wait, but in conjunction still see how overloaded the system is overall. Q: What's the cost / performance impact of this feature? A: PSI's primary cost is in the scheduler, in particular task wakeups and sleeps. I benchmarked this code using Facebook's two most scheduling sensitive workloads: memcache and webserver. They handle a ton of small requests - lots of wakeups and sleeps with little actual work in between - so they tend to be canaries for scheduler regressions. In the tests, the boxes were handling live traffic over the course of several hours. Half the machines, the control, ran with CONFIG_PSI=n. For memcache I used eight machines total. They're 2-socket, 14 core, 56 thread boxes. The test runs for half the test period, flips the test and control kernels on the hardware to rule out HW factors, DC location etc., then runs the other half of the test. For the webservers, I used 32 machines total. They're single socket, 16 core, 32 thread machines. During the memcache test, CPU load was nopsi=78.05% psi=78.98% in the first half and nopsi=77.52% psi=78.25%, so PSI added between 0.7 and 0.9 percentage points to the CPU load, a difference of about 1%. UPDATE: I re-ran this test with the v3 version of this patch set and the CPU utilization was equivalent between test and control. UPDATE: v4 is on par with v3. As far as end-to-end request latency from the client perspective goes, we don't sample those finely enough to capture the requests going to those particular machines during the test, but we know the p50 turnaround time in this workload is 54us, and perf bench sched pipe on those machines show nopsi=5.232666 us/op and psi=5.587347 us/op, so this doesn't add much here either. The profile for the pipe benchmark shows: 0.87% sched-pipe [kernel.vmlinux] [k] psi_group_change 0.83% perf.real [kernel.vmlinux] [k] psi_group_change 0.82% perf.real [kernel.vmlinux] [k] psi_task_change 0.58% sched-pipe [kernel.vmlinux] [k] psi_task_change The webserver load is running inside 4 nested cgroup levels. The CPU load with both nopsi and psi kernels was indistinguishable at 81%. For comparison, we had to disable the cgroup cpu controller on the webservers because it added 4 percentage points to the CPU% during this same exact test. Versions of this accounting code now run on 80% of our fleet. None of our workloads have reported regressions during the rollout. Daniel Drake said: : I just retested the latest version at : http://git.cmpxchg.org/cgit.cgi/linux-psi.git (Linux 4.18) and the results : are great. : : Test setup: : Endless OS : GeminiLake N4200 low end laptop : 2GB RAM : swap (and zram swap) disabled : : Baseline test: open a handful of large-ish apps and several website : tabs in Google Chrome. : : Results: after a couple of minutes, system is excessively thrashing, mouse : cursor can barely be moved, UI is not responding to mouse clicks, so it's : impractical to recover from this situation as an ordinary user : : Add my simple killer: : https://gist.github.com/dsd/a8988bf0b81a6163475988120fe8d9cd : : Results: when the thrashing causes the UI to become sluggish, the killer : steps in and kills something (usually a chrome tab), and the system : remains usable. I repeatedly opened more apps and more websites over a 15 : minute period but I wasn't able to get the system to a point of UI : unresponsiveness. Suren said: : Backported to 4.9 and retested on ARMv8 8 code system running Android. : Signals behave as expected reacting to memory pressure, no jumps in : "total" counters that would indicate an overflow/underflow issues. Nicely : done! This patch (of 9): If we keep just enough refault information to match the *current* page cache during reclaim time, we could lose a lot of events when there is only a temporary spike in non-cache memory consumption that pushes out all the cache. Once cache comes back, we won't see those refaults. They might not be actionable for LRU aging, but we want to know about them for measuring memory pressure. [hannes@cmpxchg.org: switch to NUMA-aware lru and slab counters] Link: http://lkml.kernel.org/r/20181009184732.762-2-hannes@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <jweiner@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Christopher Lameter <cl@linux.com> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
f0d7787414 |
mm, slab: shorten kmalloc cache names for large sizes
Kmalloc cache names can get quite long for large object sizes, when the sizes are expressed in bytes. Use 'k' and 'M' prefixes to make the names as short as possible e.g. in /proc/slabinfo. This works, as we mostly use power-of-two sizes, with exceptions only below 1k. Example: 'kmalloc-4194304' becomes 'kmalloc-4M' Link: http://lkml.kernel.org/r/20180731090649.16028-7-vbabka@suse.cz Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |