IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211018103105.146380-2-alexander.sverdlin@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patchset adds support for testing WCD938X connected via TX and RX Macros
on SM8250 MTP.
Srinivas Kandagatla (2):
ASoC: qcom: sm8250: add support for TX and RX Macro dais
ASoC: qcom: sm8250: Add Jack support
sound/soc/qcom/sm8250.c | 79 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
--
2.21.0
In newer variants primary codec is rt5682vs. Add support for newer
codec variants in generic machine driver module and define driver
data to register SOF sound card.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-9-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In newer chrome boards we have max98360a as an amplifier codec.
Add support for max98360a in generic machine driver and configure
driver data to enable SOF sound card support on newer boards .
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-8-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chrome board has RT5682 codec and RT1019 amp connected to I2S SP
controller on ACP hw. Also it support DMIC capture endpoints with
inbuilt pdm controller on ACP hw block. Add driver module to create
backend dai links for sof dsp core. We pass driver data with audio
end points configuration to register sound cards and create device
nodes for all audio endpoints.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-7-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renoir based Chrome board has RT5682 as primary headset codec and
RT1019 amp device connected to I2SSP ACP i2s controller. Add driver
to register legacy sound card devices on Chrome board.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-6-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have machines with different audio endpoints configurations
across various distributions. We need to support multiple sound
cards for different combinations of I2S instance and codecs hw.
Now we also need to support SOF-DSP endpoints based sound cards.
All such card combinations slightly differs in terms of machine
ops callback. This patch adds ACP generic machine driver module
that exposes method to create ACP cards dai links and define new
ops for audio endpoints configurations. Initially we have added
dailink support for RT5682 and RT1019 codec connection with ACP
I2S_SP instance. We will add newer codecs in this module to use
this for all AMD's ACP block sound cards supports in future.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-5-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add I2S dai driver for Renoir platform and register with common
acp framework to support non dsp I2S use case on Renoir.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using legacy way of exposing dais and DMA configuration that
requires separate driver modules for various ACP SOC with almost
similar hw configuration. Moreover the legacy approach requires
separate I2S and DMA module platform devices registration and need
machine specific quirk to control various I2S endpoints. Add generic
dai driver and platform driver for I2S controller on ACP hw block.
This common framework can be used by various ACP platform devices
that shares common specs.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211019070938.5076-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 75b31192fe.
The original purpose of customized pcm was to config prealloc buffer size
flexibly. but, we can do the same thing by soc-generic-dmaengine-pcm.
And the generic one can generated the better config by querying DMA
capabilities from dmaengine driver rather than the Hard-Coded one.
e.g.
the customized one:
static const struct snd_pcm_hardware snd_rockchip_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_RESUME |
SNDRV_PCM_INFO_INTERLEAVED,
...
the generic one:
ret = dma_get_slave_caps(chan, &dma_caps);
if (ret == 0) {
if (dma_caps.cmd_pause && dma_caps.cmd_resume)
hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
hw.info |= SNDRV_PCM_INFO_BATCH;
...
So, let's revert back to use the generic dmaengine pcm.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Reviewed-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/1632792957-80428-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The soc_intel_is_foo() helpers from
sound/soc/intel/common/soc-intel-quirks.h are useful outside of the
sound subsystem too.
Move these to include/linux/platform_data/x86/soc.h, so that
other code can use them too.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211018143324.296961-2-hdegoede@redhat.com
When a Jieli Technology USB Webcam is connected, the video part works
well, but the mic sound is speeded up. On dmesg there are messages
about different rates from the runtime rates, warnings about volume
resolution and lastly, the log is filled, every 5 seconds, with
retire_capture_urb error messages.
The mic works only when ep packet size is set to wMaxPacketSize (normal
sound and no more retire_capture_urb error messages). Skipping reading
sample rate, fixes the messages about different rates and forcing a volume
resolution, fixes warnings about volume range. I have arbitrarily choosed
the value (16): I read in a comment that there should be no more than 255
levels, so 4096 (max volume) / 16 = 0-255.
Signed-off-by: Marco Giunta <giun7a@gmail.com>
Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
WCD938X on SM8250 MTP is connected via TX macro which has MBHC support,
So add this jack support in the soundcard driver too.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211006172745.22103-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SM8250 MTP boards WCD938x codec is connected via TX and RX Macros,
so add support for this dais in the soundcard driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211006172745.22103-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Yellow Carp ACP6x drivers can be built by selecting necessary
kernel config option.
The patch enables build support of the same.
Signed-off-by: Vijendar Mukunda<Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-11-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ACP6x irq handler for handling irq events for ACP IP.
Add pdm irq events handling.
Whenever audio data equal to the PDM watermark level are consumed,
interrupt is generated. Acknowledge the interrupt.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PDM platform driver binds to the platform device created by
ACP6x PCI device. PDM driver registers ALSA DMA and CPU DAI
components with ASoC framework.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP6.x IP has PDM decoder block.
Create a platform device for it, so that the PDM platform driver
can be bound to this device.
Pass PCI resources like MMIO to this platform device.
Create a platform device for generic dmic codec driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During development of V5 of the i2s-tdm patch series, I replaced
the atomic refcount with a regular integer, as it was only ever
accessed within a spinlock.
Foolishly, I got the semantics of atomic_dec_and_test wrong, which
resulted in a test for 0 actually becoming a test for >0.
The result was that setting the audio frequency broke; switching
from 44100 Hz audio playback to 96000 Hz audio playback would
garble the sound most unpleasantly.
Fix this by checking for --refcount == 0, which is what it should
have been all along.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211015210730.308946-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement driver_name to provide an alternative to card_name for userspace
configuration of Amlogic audio cards.
Suggested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211017160028.23318-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Up to now aic32x4_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211015071113.2795767-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Do nothing if format was zero at snd_soc_runtime_set_dai_fmt().
soc-core.c can be more simple code by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ee8jt7d3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI active count is not exchanged during for_each_rtd_dais()
loops. We don't need to keep snd_soc_dai_stream_active() as
"active" on soc_pcm_hw_clean(). This patch avoid verbose code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ilxvt7e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_clean() is using "continue" during for_each_rtd_dais(),
but it is very verbose. This patch cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ibt7ej.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've had an x86-specific SG-buffer handling code, but now it can be
merged gracefully with the standard non-contiguous DMA pages.
After the migration, SNDRV_DMA_TYPE_DMA_SG becomes identical with
SNDRV_DMA_TYPE_NONCONTIG on x86, while others still fall back to
SNDRV_DMA_TYPE_DEV.
The remaining problem is about the SG-buffer with WC pages: the DMA
core stuff on x86 doesn't treat it well, so we still need some special
handling to manipulate the page attribute manually. The mmap handler
for SNDRV_DMA_TYPE_DEV_SG_WC still returns -ENOENT intentionally for
the fallback to the default handler.
Link: https://lore.kernel.org/r/20211017074859.24112-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Following to the addition of non-contiguous pages, this patch adds the
new contiguous non-coherent page allocation to the standard memalloc
helper. Like the previous non-contig type, this non-coherent type is
also directional and requires the explicit sync, too. Hence the
driver using this type of buffer may need to set
SNDRV_PCM_INFO_EXPLICIT_SYNC flag to the PCM hardware.info as well,
unless it's set up in the managed mode.
Link: https://lore.kernel.org/r/20211017074859.24112-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support for allocation of non-contiguous DMA pages
in the common memalloc helper. It's another SG-buffer type, but
unlike the existing one, this is directional and requires the explicit
sync / invalidation of dirty pages on non-coherent architectures.
For this enhancement, the following points are changed:
- snd_dma_device stores the DMA direction.
- snd_dma_device stores need_sync flag indicating whether the explicit
sync is required or not.
- A new variant of helper functions, snd_dma_alloc_dir_pages() and
*_all() are introduced; the old snd_dma_alloc_pages() and *_all()
kept as just wrappers with DMA_BIDIRECTIONAL.
- A new helper snd_dma_buffer_sync() is introduced; this gets called
in the appropriate places.
- A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced.
When the driver allocates pages with this new type, and it may require
the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for
taking the full control of PCM applptr and hwptr changes (that implies
disabling the mmap of control/status data). When the buffer
allocation is managed by snd_pcm_set_managed_buffer(), this flag is
automatically set depending on the result of dma_need_sync()
internally. Otherwise, if the buffer is managed manually, the driver
has to set the flag explicitly, too.
The explicit sync between CPU and device for non-coherent memory is
performed at the points before and after read/write transfer as well
as the applptr/hwptr syncptr ioctl. In the case of mmap mode,
user-space is supposed to call the syncptr ioctl with the hwptr flag
to update and fetch the status at first; this corresponds to CPU-sync.
Then user-space advances the applptr via syncptr ioctl again with
applptr flag, and this corresponds to the device sync with flushing.
Other than the DMA direction and the explicit sync, the usage of this
new buffer type is almost equivalent with the existing
SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via
snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the
continuous pages via snd_sgbuf_get_chunk_size().
For those SG-page handling, the non-contig type shares the same ops
with the vmalloc handler. As we do always vmap the SG pages at first,
the actual address can be deduced from the vmapped address easily
without iterating the SG-list.
Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On m68k, compiling drivers under SND_ISA causes build errors:
../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
33 | flags = claim_dma_lock();
| ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
41 | release_dma_lock(flags);
| ^~~~~~~~~~~~~~~~
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
| ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
| ^~~~~~~~~~~~
and more...
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In cases where both rx and tx lrck are synced to the same source,
the resets for rx and tx need to be triggered simultaneously,
according to the downstream driver.
As there is no reset API to atomically bulk (de)assert two resets
at once, what the driver did was implement half a reset controller
specific to Rockchip, which tried to write the registers for the
resets within one write ideally or several writes within an irqsave
section.
This of course violates abstractions quite badly. The driver should
not write to the CRU's registers directly.
In practice, for the cases I tested the driver with, which is audio
playback, replacing the synchronised asserts with just individual
ones does not seem to make any difference.
If it turns out that this breaks something in the future, it should
be fixed through the specification and implementation of an atomic
bulk reset API, not with a CRU hack.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Message-Id: <20211016105354.116513-2-frattaroli.nicolas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
We already have Audio-Graph-Card which is Of-Graph base general sound
card driver. Basically it supports basic CPU-Codec connection, and is
also supporting DPCM connection. Because it was forcibly expanded to
DPCM, DT parsing is very limited and very difficult to add new features
on it, for example Multi-CPU/Codec support, Codec2Codec support, etc.
This patch adds more flexible new Audio-Graph-Card2 driver for it.
Audio-Graph-Card and Audio-Graph-Card2 are similar, but don't have
full compatibility.
The reason why I need Audio-Graph-Card2 instead of updating Audio-Graph-Card
is that it is very difficult to keep compatibility.
Audio-Graph-Card2 supports Normal/DPCM/Codec2Codec Connection wich
Single/Multi DAIs. And it is possible to Customizing.
This patch-set adds Audio-Graph-Card2 driver and its custom driver
sample, and DT settings sample which can be used for testing.
To enable testing/debuging, this patch-set also adds Test-Component
driver. We already have Dummy Component and/or Dummy DAI on soc-utils,
but 1) we can't use it from DT, 2) it do nothing.
Added new Test-Component can be used from DT, and it can indicate called
function name. We can use it to trace callback order, understanding
ALSA SoC behavior, etc, etc...
Sample DT settings of Audio Graph Card2 is using Test-Component as CPU/Codec DAI.
You can easily try to use/test it if you added below line to your DT file.
Your .config needs to have below CONFIGs to use/test it.
It will probe sample Sound Card which has Normal/DPCM/Multi/Codec2Codec
connections.
#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi"
CONFIG_SND_AUDIO_GRAPH_CARD2
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
CONFIG_SND_TEST_COMPONENT
Because Audio Graph Card2 is still under experimental stage, it will
indicate such warning when probing, and the DT might be updated/exchanged.
It can use Codec2Codec, but it will start automatically when probed,
and can't stop it so far. It should be updated.
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/871r8u4s6q.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87a6mhwyqn.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87tuitusy4.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87a6jn56x0.wl-kuninori.morimoto.gx@renesas.com
v1 -> v2
- don't use "port" base for_each loop
v2 -> v3
- Rename audio-graph-card2 to rich-graph-card
- Rename DSP to DPCM not to confuse
- Normal/DPCM/Codec2Codec can use Single/Multi DAIs.
- use dpcm/multi/codec2codec node instead of using extra compatible
- Sample DTSI patch is separated to Single/Multi.
v3 -> v4
- Rename rich-graph-card to audio-graph-card2
- fixup custom sample driver's connection bug
- test-component compatible uses "verbose" instead of "vv"
v4 -> v5
- tidyup git-log comment at
- tidyup Custom Sample comment
Kuninori Morimoto (16):
ASoC: test-component: add Test Component YAML bindings
ASoC: test-component: add Test Component for Sound debug/test
ASoC: simple-card-utils: add asoc_graph_is_ports0()
ASoC: simple-card-utils: add codec2codec support
ASoC: add Audio Graph Card2 driver
ASoC: audio-graph-card2: add Multi CPU/Codec support
ASoC: audio-graph-card2: add DPCM support
ASoC: audio-graph-card2: add Codec2Codec support
ASoC: add Audio Graph Card2 Yaml Document
ASoC: add Audio Graph Card2 Custom Sample
ASoC: audio-graph-card2-custom-sample.dtsi: add Sample DT for Normal (Single)
ASoC: audio-graph-card2-custom-sample.dtsi: add Sample DT for Normal (Nulti)
ASoC: audio-graph-card2-custom-sample.dtsi: add DPCM sample (Single)
ASoC: audio-graph-card2-custom-sample.dtsi: add DPCM sample (Multi)
ASoC: audio-graph-card2-custom-sample.dtsi: add Codec2Codec sample (Single)
ASoC: audio-graph-card2-custom-sample.dtsi: add Codec2Codec sample (Multi)
.../bindings/sound/audio-graph-card2.yaml | 57 +
.../bindings/sound/test-component.yaml | 33 +
include/sound/graph_card.h | 21 +
include/sound/simple_card_utils.h | 4 +
sound/soc/generic/Kconfig | 20 +
sound/soc/generic/Makefile | 6 +
.../generic/audio-graph-card2-custom-sample.c | 183 +++
.../audio-graph-card2-custom-sample.dtsi | 227 +++
sound/soc/generic/audio-graph-card2.c | 1281 +++++++++++++++++
sound/soc/generic/simple-card-utils.c | 46 +-
sound/soc/generic/test-component.c | 659 +++++++++
11 files changed, 2536 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
create mode 100644 Documentation/devicetree/bindings/sound/test-component.yaml
create mode 100644 sound/soc/generic/audio-graph-card2-custom-sample.c
create mode 100644 sound/soc/generic/audio-graph-card2-custom-sample.dtsi
create mode 100644 sound/soc/generic/audio-graph-card2.c
create mode 100644 sound/soc/generic/test-component.c
--
2.25.1
This commit copies queued event for change of register DSP into
userspace when application operates ALSA hwdep character device.
The notification occurs only when packet streaming is running.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to notify parameter change of register DSP
to userspace application. A simple queue is added to store encoded data
for the change as long as ALSA hwdep character device is opened by
application.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new ioctl command for userspace applications to read
cached parameters of register DSP.
The structured data includes model-dependent parameters. Userspace
application should be carefully programmed so that what parameter is
common and specific.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit parses message and cache current parameters of input function,
available for MOTU Ultralite, 4 pre, and Audio Express.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit parses message and cache current parameters of line input
function, available for MOTU 828 mk2 and Traveler.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit parses message and cache current parameters of output
function, commonly available for all of register DSP model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit parses message and cache current parameters of mixer output
function, commonly available for all of register DSP model
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In register DSP models, current parameters of DSP are always reported by
messages in isochronous packet. When user operates hardware component such
as rotary knob, corresponding message is changed.
This commit parses the message and cache current parameters of mixer
source function, commonly available for all of register DSP models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new ioctl commands for userspace applications to read
cached image about hardware meters in register DSP and command DSP models.
The content of image differs depending on models. Model-specific parser
should be implemented in userspace.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of MOTU models allows software to configure their DSP parameters by
command included in asynchronous transaction. The models multiplex messages
for hardware meters into isochronous packet as well as PCM frames. For
convenience, I call them as 'command DSP' model.
This patch adds message parser for them to gather hardware meter
information.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of MOTU models allows software to configure their DSP parameters by
accessing to their registers. The models multiplex messages for status of
DSP into isochronous packet as well as PCM frames. The message includes
information of hardware metering, MIDI message, current parameters of DSP.
For my convenience, I call them as 'register DSP' model.
This patch adds message parser for them to gather hardware meter
information.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211015080826.34847-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A colletion of smallish mostly driver specific fixes, the biggest thing
here is fixing some of the core code to generate change notifications
properly when writing to controls which will fix issues with UIs not
showing the correct values.
There's one build fix here with a slightly misleading changelog saying
it's adding IRQ config support, it's adding a missing select of the
regmap-irq code rather than adding a feature.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmFpaYkACgkQJNaLcl1U
h9AK1Qf8DBJ4hv+jXUB78qrymQCw1gGbZ9S+Z0TUX/GG+AquP5HbuwKvL28pjKU3
8nNqqfqcqT9wxPu5T4ct1TJishT+3lhvpsGpMU4beP3/P1RcA6asUF9ycty2EN+s
07gXTnYTUGzMl+ZXKBt9lZBpKrxn/EBh8CkJDNYTrTv9O6kaFwT9UT+h8Ogn+Blg
XGg7wveKrLjpEhwFa6HvRWiV+12kI6ZWt4JQrF2Z0bMkRNWwz14A0qybrr1FrFud
FkB1gD3PArCLv6AYTW4F8t0ldwKniJjX386yq50dOfab/iWZpcqmxou35+exhP/j
PhXnUUvAeowZGPRjEAqAcGTq3zCTqw==
=3OCP
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.15-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.15
A colletion of smallish mostly driver specific fixes, the biggest thing
here is fixing some of the core code to generate change notifications
properly when writing to controls which will fix issues with UIs not
showing the correct values.
There's one build fix here with a slightly misleading changelog saying
it's adding IRQ config support, it's adding a missing select of the
regmap-irq code rather than adding a feature.
The headset type detection must run to set the analogue switches
correctly for the attached headset type. Without this only headsets
with wiring matching the chip default will have a functioning mic.
commit c26a5289e8 ("ASoC: cs42l42: Add support for set_jack calls")
moved the interrupt unmasking to the component set_jack() callback.
But it's not mandatory for a machine driver to register a struct
snd_soc_jack handler. Without a registered handler the type detection
would not have run and so the mic would not work on some types of
headset.
This patch restores the unmasking of TS_PLUG and TS_UNPLUG interrupts
during probe.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-17-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver must free the IRQ in remove() to prevent the potential race
where an IRQ starts to be handled while the driver is being removed but
devres has not yet called free_irq(). However, the driver can run without
an interrupt but devm_free_irq() will hit a WARN() if no devres-managed
interrupt was ever created.
Fix this by only attempting to create the interrupt handler if the hardware
config specified an interrupt, and failing probe() if the interrupt could
not be created. This means that in cs42l42_remove() an interrupt must have
been registered if the irq number is valid and therefore it is safe to call
devm_free_irq().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-16-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet the SRC MCLK must be as near as possible to
(125 * sample rate). This means it should be ~6MHz for rates up to 48k
and ~12MHz for rates above that. As per datasheet table 4-21.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After enabling the HP or ADC by writing the corresponding PDN=0,
it takes around 20 milliseconds for it to power up and the midrail
supply to be stable. Add this wait into a DAPM widget callback.
If HP and ADC are both powering up in a DAPM sequence, there's no
need to do the wait twice. The widget will perform one wait in the
POST_PMU if there was a PRE_PMU for one or both.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It isn't possible to switch MCLK between 12MHz and 24MHz rate groups
on-the-fly - this can only be done when cs42l42 is powered-down.
All "normal" SCLK rates use an MCLK in the 12MHz group, so change the
configs for SCLK > 12.288 MHz to use the PLL to generate an MCLK in
the 12MHz group.
As this means MCLK_DIV is always 0 it can be removed from the pll
configuration setup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently only supports configuring for sample rates <= 96k
and it isn't possible to setup a configuration that will support all
sample rates up to 192k.
For sample rates up to 96k MCLK is in the 12MHz group.
However, although 192k only requires an I2S clock in the 12MHz group,
the cs42l42 audio path is not natively 192k so the audio must be
resampled. But for 192k the SRC requires a 24MHz MCLK.
It is not possible to switch MCLK between 12MHz and 24MHz groups
on-the-fly. The 12MHz group supports all sample rates up to 96k.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can run without an interrupt so if devm_request_threaded_irq()
failed, the probe() just carried on. But if this was EPROBE_DEFER the
driver would continue without an interrupt instead of deferring to wait
for the interrupt to become available.
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An I2S frame always has two slots (left and right) even when sending
mono. The right channel (channel 2) of ASP TX will always have the
same bit width as the left channel and will always be on the high
phase of LRCLK.
The previous implementation always passed the field masks for both
channels to snd_soc_component_update_bits() but for mono the written value
only contained the settings for channel 1. The result was that for mono
channel 2 was set to 8-bit (which is an invalid configuration) with both
channels on the low phase of LRCLK.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 585e7079de ("ASoC: cs42l42: Add Capture Support")
Link: https://lore.kernel.org/r/20211015133619.4698-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When capture and playback substreams are both running at the same time,
cs42l42_pcm_hw_params() would be called for each direction. The first
call will configure the PLL. The second call must not write the PLL
configuration registers again if the first substream is already running,
as this could destabilize the PLL.
The DAI is marked symmetric sample bits and sample rate, so the two
directions will always have the same SCLK (I2S always has 2 channel slots
so the DAI does not need to require symmetric channels to guarantee the
same SCLK). However, since cs42l42_pll_config() is checking for an active
stream it may as well test that the requested SCLK is the same as the
currently active configuration.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211015133619.4698-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently errors on register read/write/update are reported with
an error code and the corresponding function but does not provide
any details on the which register number did it actually fail.
register number can give better clue and it should be easy to
locate the code and fix.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211014161330.26645-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec-Multi sample to audio-graph-card2-custom-sample.dtsi.
Because it can use very basic connection only for now,
it can use only
- 2channels
- S32_LE format
Test-Component driver has "IN" and "OUT" widget. Thus the route is
+--+ +-+
| | | |- Codec8 <- IN
| | <- | |- Codec9 <- IN
| | +-+
| |
| | +-+
| | -> | |- Codec10 -> OUT
| | | |- Codec11 -> OUT
+--+ +-+
One note here is that it will start works when it boot.
In other words we can't stop it so far.
We need to update driver for it in the future.
...
asoc-audio-graph-card2-custom-sample: multicodec <-> multicpu mapping ok
test-component test_codec: test_dai_startup() : test_codec.9
test-component test_codec: test_dai_startup() : test_codec.8
test-component test_codec: test_dai_startup() : test_codec.11
test-component test_codec: test_dai_startup() : test_codec.10
...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtnelu2k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec-Single sample to audio-graph-card2-custom-sample.dtsi.
Because it can use very basic connection only for now,
it can use only
- 2channels
- S32_LE format
Test-Component driver has "IN" and "OUT" widget. Thus the route is
+--+
| | <-- Codec6 <-- IN
| | --> Codec7 --> OUT
+--+
One note here is that it will start works when it boot.
In other words we can't stop it so far.
We need to update driver for it in the future.
...
asoc-audio-graph-card2-custom-sample: test_codec.7 <-> test_codec.6 mapping ok
test-component test_codec: test_dai_startup() : test_codec.6
test-component test_codec: test_dai_startup() : test_codec.7
...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o87ulu2o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DPCM link Multi-CPU/Codec sample to
audio-graph-card2-custom-sample.dtsi.
This sample is assuming MIXer connection.
One note is that Multi-FE is not supported on ASoC
FE BE
**** +-+
CPU5 -- * * -- | | -- Codec4
CPU6 -- * * | | -- Codec5
**** +-+
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmsalu2s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DPCM link Single-CPU/Codec sample to
audio-graph-card2-custom-sample.dtsi.
This sample is assuming MIXer connection.
FE BE
****
CPU3 -- * * -- Codec3
CPU4 -- * *
****
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1cqlu2w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 settings is a little bit difficult for beginner,
and Customizing it also difficult/confusable too.
So, this patch adds sample for it.
You can easily use it by adding below line on your DT file,
and select CONFIGs to your .config.
#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi"
CONFIG_SND_AUDIO_GRAPH_CARD2
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
CONFIG_SND_TEST_COMPONENT
This patch uses audio-graph-card2 base custom sample driver.
You can directly use audio-graph-card2 instead of custom sample driver
by modifing compatible.
- compatible = "audio-graph-card2-custom-sample";
+ compatible = "audio-graph-card2";
Sample custom driver will indicate customized print.
It is using Test-Component driver for CPU/Codec.
It can indicate more detail print of each behavior if user want to.
In such case, you need to update compatible to "xxx-nv" or "xxx-vv".
- compatible = "test-cpu";
+ compatible = "test-cpu-verbose";
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tuhmlu35.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 has customizing support.
This means user can re-use audio-graph-card2 DT parsing, and possible
to expand to own special handling.
This patch adds Audio Graph Card2 Customize Sample Driver.
It can re-use audio-graph-card2 parsing by calling
audio_graph2_parse_of(...), and user can expand each functions by
using hooks.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v922lu3c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Codec2Codec support to audio-graph-card2.
It can use Codec2Codec but very simple case only for now.
It doesn't have "SWITCH" control yet, thus it start automatically
when it was probed, and can't stop, so far.
Thus it needs to be updated around widgets/routing handling,
and you need to understand that it is under experimental.
Codec has SND_SOC_DAPM_INPUT() (= IN) / SND_SOC_DAPM_OUTPUT(= OUT)
widgets in below case.
It is assuming 2channel, S32_LE format for now.
It needs to be updated, too.
It needs "codec2codec" node (= B), needs to have routing (= A),
need to indicate CPU side at links (= X).
ports@0 is for CPU side (= X), port@1 is Codec side (= Y).
It needs to have "rate" (= C)
+--+
| |<-- Codec0 <-- IN
| |--> Codec1 --> OUT
+--+
sound {
compatible = "audio-graph-card2";
(A) routing = "OUT" ,"DAI1 Playback",
"DAI0 Capture", "IN";
(X) links = <&c2c>;
(B) codec2codec {
ports {
(C) rate = <48000>;
(X) c2c: port@0 { c2cf_ep: endpoint { remote-endpoint = <&codec0_ep>; }; };
(Y) port@1 { c2cb_ep: endpoint { remote-endpoint = <&codec1_ep>; }; };
};
};
Codec {
ports {
port@0 {
bitclock-master;
frame-master;
codec0_ep: endpoint { remote-endpoint = <&c2cf_ep>; }; };
port@1 { codec1_ep: endpoint { remote-endpoint = <&c2cb_ep>; }; };
};
};
Link: https://lore.kernel.org/r/87k0xszlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y26ylu4a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2 will support DPCM/Multi/Codec2Codec,
and these will use almost same DT settings which uses
ports0 and ports1.
This patch adds asoc_graph_is_ports0() which checks
port is under port0 or not.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yu2n8ra.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have dummy-codec, dummy-platform.
But its issues are
1) we don't have dummy-cpu,
2) we can't select it via DeviceTree
3) It do nothing
Sometimes we want to have Dummy Sound Component for debugging,
for testing, for learning Framework behavior, etc, etc...
This patch adds Test-Component driver for it.
User can select CPU Component by using "test-cpu" compatible,
and can select Codec Component by using "test-codec" compatible.
It doesn't support Platform so far, but is easy to add.
We can verbose print to know its progress if user selected
xxx-verbose compatible driver.
for example,
test-cpu : silent Component, silent DAI
test-cpu-verbose-component : verbose Component, silent DAI
test-cpu-verbose-dai : silent Component, verbose DAI
test-cpu-verbose : verbose Component, verbose DAI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dein8rx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and
rear speakers are silent, this patch fixes that by overriding the pin
layout and by initializing the amplifier which needs a GPIO pin to be
set to 1 then 0, similar to the existing HP Spectre x360 14 model.
In order to have volume control, both front and rear speakers were
forced to use the DAC1.
This patch also correctly map the mute LED but since there is no
microphone on/off switch exposed by the alsa subsystem it never turns
on by itself.
There are still known audio issues in this laptop: headset microphone
doesn't work, the button to mute/unmute microphone is not yet mapped,
the LED of the mute/unmute speakers doesn't seems to be exposed via
GPIO and never turns on.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953
Signed-off-by: Davide Baldo <davide@baldo.me>
Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13
The GSP670 has 2 playback and 1 recording device that by default are
detected in an incompatible order for alsa. This may have been done to make
it compatible for the console by the manufacturer and only affects the
latest firmware which uses its own ID.
This quirk will resolve this by reordering the channels.
Signed-off-by: Brendan Grieve <brendan@grieve.com.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_pcm_delay() and snd_pcm_hwsync() do the almost same thing.
The only difference is that the former calculate the delay, so unify
them as a code cleanup, and treat NULL delay argument only for hwsync
operation.
Also, the patch does a slight code refactoring in snd_pcm_delay().
The initialization of the delay value is done in the caller side now.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211014145323.26506-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we used to read the current value of the mixer element
dynamically at the first access, and the error from a GET_CUR message
is treated as a fatal error (unless QUIRK_IGNORE_CTL_ERROR is set).
It's rather inconvenient, as most of GET_CUR errors are no fatal, and
we can continue operation with assumption of some fixed value.
This patch makes the USB-audio driver to change the behavior at probe
time; now it tries to initialize the current value of each mixer
element that is built from a feature unit (those for typically for
mixer volumes and switches). When a read failure happens, it tries to
set the known minimum value. After that point, a cached value is used
always, hence we won't hit GET_CUR message error any longer.
The error from GET_CUR message is still shown as a warning normally,
but only once at the probe time, and it'll keep operating. If the
message is confirmed to be harmless, it can be shut up by
QUIRK_IGNORE_CTL_ERROR quirk flag, too.
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211014130636.17860-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error from snd_usb_lock_shutdown() indicates that the device is
disconnected, hence it makes no sense to show any further control
message error in get_ctl_value_v2(). Return the error directly
instead.
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211014130636.17860-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error message in get_ctl_value_v2() (for UAC2/3) is shown via
KERN_ERR level but it was intended to be rather a debug message as
seen in get_ctl_value_v1() (for UAC1). This patch downgrade the
printk level.
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211014130636.17860-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A back-merge of 5.15 branch into 5.16-devel branch for further
development of USB and ALSA core stuff that depends on 5.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply existing PCI quirk to the Clevo PC50HS and related models to fix
audio output on the built in speakers.
Signed-off-by: Steven Clarkson <sc@lambdal.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Shciit Hel device responds to the ctl message for the mic capture
switch with a timeout of -EPIPE:
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
This seems safe to ignore as the device works properly with the control
message quirk, so add it to the quirk table so all is good.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several things the patch adding the support for 'I2S Reference'
got wrong:
- "None" selection is in fact equals to last selected reference
- The custom put overrides RX/TX len, TDM slot sizes, etc
- the enum is useless in most part for the reference tracking
- there is no need for EXT control as there is a single bit in
RT1011_TDM1_SET_1 register (bit 7) which selects the reference
- it was using ucontrol->value.integer.value[0] in the put/get callbacks
which causesed access to 'I2S Reference' enum with alsamixer to fail
Complements: c3de683c4d ("ASoC: rt1011: Fix 'I2S Reference' enum control caused error")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211013123300.11095-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a noise issue for 8kHz sample rate on slave mode.
Compared with master mode, the difference is the DACDIV
setting, after correcting the DACDIV, the noise is gone.
There is no noise issue for 48kHz sample rate, because
the default value of DACDIV is correct for 48kHz.
So wm8960_configure_clocking() should be functional for
ADC and DAC function even if it is slave mode.
In order to be compatible for old use case, just add
condition for checking that sysclk is zero with
slave mode.
Fixes: 0e50b51aa2 ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ChiYuan Huang <cy_huang@richtek.com>:
From: ChiYuan Huang <cy_huang@richtek.com>
This patch series Add the Richtek RT9120 support.
In v4:
- Add 'classd_tlv' for 'SPK Gain Volume' control item.
- Unify the tlv declaration to the postfix '_tlv'.
- Fix 'digital_tlv' mute as 1 to declare the minimum is muted.
In v3:
- Add dvdd regulator binding to check the dvdd voltage domain.
- Refine sdo_select_text.
- Use switch case in 'internal_power_event' function.
- Remove the volume and mute initially write in component probe.
- Remove the mute API. It's no need by HW design.
In v2:
- Add missing #sound-dai-cells property.
ChiYuan Huang (2):
ASoC: dt-bindings: rt9120: Add initial bindings
ASoC: rt9120: Add rt9210 audio amplifier support
.../devicetree/bindings/sound/richtek,rt9120.yaml | 59 +++
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rt9120.c | 495 +++++++++++++++++++++
4 files changed, 566 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
create mode 100644 sound/soc/codecs/rt9120.c
--
2.7.4
The only usage of acp5x_i2s_dai_ops is to assign its address to the ops
field in the snd_soc_dai_driver struct, which is a pointer to const.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211012211506.21159-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These are only assigned to the ops field in the snd_soc_dai_link struct
which is a pointer to const struct snd_soc_ops. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211012205521.14098-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This drops the rt9210 support due to a race with a new version being
sent out for some incremental changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
The device advertises 8 formats, but only a rate of 48kHz is honored
by the hardware and 24 bits give chopped audio, so only report the
one working combination. This fixes out-of-the-box audio experience
with PipeWire which otherwise attempts to choose S24_3LE (while
PulseAudio defaulted to S16_LE).
Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5 ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().
The code was moved around in commit a41d122449 ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().
The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.
However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.
This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.
Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent support for the improved low-latency playback mode applied
the SNDRV_PCM_INFO_EXPLICIT_SYNC flag for the target streams, but this
was a slight overkill. The use of the flag above disables effectively
both PCM status and control mmaps, while basically what we want to
track is only about the appl_ptr update.
For less restriction, use a more proper flag,
SNDRV_PCM_INFO_SYNC_APPLPTR instead, which disables only the control
mmap.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Link: https://lore.kernel.org/r/20211011103650.10182-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to define the codec pin 0x1b to be the mic, but somehow
the mic doesn't support hot plugging detection, and Windows also has
this issue, so we set it to phantom headset-mic.
Also the determine_headset_type() often returns the omtp type by a
mistake when we plug a ctia headset, this makes the mic can't record
sound at all. Because most of the headset are ctia type nowadays and
some machines have the fixed ctia type audio jack, it is possible this
machine has the fixed ctia jack too. Here we set this mic jack to
fixed ctia type, this could avoid the mic type detection mistake and
make the ctia headset work stable.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537
Reported-and-tested-by: msd <msd.mmq@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Access to 'I2S Reference' enum causes alsamixer to fail to load:
$ alsamixer
cannot load mixer controls: Invalid argument
cml_rt1011_rt5682 cml_rt1011_rt5682: control 2:0:0:TL I2S Reference:0: access overflow
The reason is that the original patch adding the code was using
ucontrol->value.integer.value[0]
instead the correct
ucontrol->value.enumerated.item[0]
for an ENUM control.
Fixes: 87f40af26c ("ASoC: rt1011: add i2s reference control for rt1011")
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211011144518.2518-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ensure the default 0dB playback path is always used.
The code that set FULL_SCALE_VOL based on LOAD_DET_RCSTAT was
spurious, and resulted in a -6dB attenuation being accidentally
inserted into the playback path.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211011144903.28915-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The small set of cleanups against bytcr_rt5651 board file.
In v2:
- added commit message to patch 2 (Joe, Pierre)
- added cover letter (Pierre)
- added Hans to Cc list (Hans)
Andy Shevchenko (4):
ASoC: Intel: bytcr_rt5651: Get platform data via dev_get_platdata()
ASoC: Intel: bytcr_rt5651: Use temporary variable for struct device
ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk
ASoC: Intel: bytcr_rt5651: Utilize dev_err_probe() to avoid log
saturation
sound/soc/intel/boards/bytcr_rt5651.c | 118 +++++++++++---------------
1 file changed, 50 insertions(+), 68 deletions(-)
--
2.33.0
Michael Forney reported an incorrect padding type that was defined in
the commit 80fe7430c7 ("ALSA: add new 32-bit layout for
snd_pcm_mmap_status/control") for PCM control mmap data.
His analysis is correct, and this caused the misplacements of PCM
control data on 32bit arch and 32bit compat mode.
The bug is that the __pad2 definition in __snd_pcm_mmap_control64
struct was wrongly with __pad_before_uframe, which should have been
__pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and
control mmap. Basically this bug leads to two problems:
- The offset of avail_min field becomes wrong, it's placed right after
appl_ptr without padding on little-endian
- When appl_ptr and avail_min are read as 64bit values in kernel side,
the values become either zero or corrupted (mixed up)
One good news is that, because both user-space and kernel
misunderstand the wrong offset, at least, 32bit application running on
32bit kernel works as is. Also, 64bit applications are unaffected
because the padding size is zero. The remaining problem is the 32bit
compat mode; as mentioned in the above, avail_min is placed right
after appl_ptr on little-endian archs, 64bit kernel reads bogus values
for appl_ptr updates, which may lead to streaming bugs like jumping,
XRUN or whatever unexpected.
(However, we haven't heard any serious bug reports due to this over
years, so practically seen, it's fairly safe to assume that the impact
by this bug is limited.)
Ideally speaking, we should correct the wrong mmap status control
definition. But this would cause again incompatibility with the
existing binaries, and fixing it (e.g. by renumbering ioctls) would be
really messy.
So, as of this patch, we only correct the behavior of 32bit compat
mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now
handled differently in compat mode to read/write the 32bit values at
the right offsets. The control mmap of 32bit apps on 64bit kernels
has been already disabled (which is likely rather an overlook, but
this worked fine at this time :), so covering SYNC_PTR ioctl should
suffice as a fallback.
Fixes: 80fe7430c7 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
Reported-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org
Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007170250.27997-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Access to platform data via dev_get_platdata() getter to make code cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211007165715.27463-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using fch clock controller as parent mclk source for rt5682
codec. Add config to enable clock framework support for 48MHz fixed
clock when machine driver config is selected.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20211011055354.67719-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
snd_soc_register_component+0x70/0x90 [snd_soc_core]
devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
tas2552_probe+0x265/0x320 [snd_soc_tas2552]
? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
i2c_device_probe+0xa31/0xbe0
Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211009065840.3196239-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel already has support for very similar Pioneer djm products
and this work is based on that.
Added device to quirks-table.h and added control info to
mixer_quirks.c.
Tested on my hardware and all working.
Signed-off-by: William Overton <willovertonuk@gmail.com>
Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the case where the call to i2s_tdm_prepare_enable_mclk fails the
function returns before the error handling goto is executed. Fix this
by removing the return do perform the intended error handling exit.
Fixes: 081068fd64 ("ASoC: rockchip: add support for i2s-tdm controller")
Addresses-Coverity: ("Structurally dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20211008095430.62680-2-colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to rockchip_i2s_ch_to_io is only useful for its return
value which is not being used. The function call also has no
side effects, the call is effectively useless and can be removed.
Addresses-Coverity: ("Useless call")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20211008095430.62680-1-colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because clock names are modified in mediatek CCF driver, sync the updated
clock names to audsys driver.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Message-Id: <20211008070424.14347-1-trevor.wu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The small set of cleanups against bytcht_es8316 board file.
In v4:
- fixed Pierre's email (Pierre)
- added Hans to the Cc list
In v3:
- actually added a Pierre's tag (Mark)
In v2:
- added tag (Pierre)
- added commit message to the patch 2 (Joe)
Andy Shevchenko (4):
ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()
ASoC: Intel: bytcht_es8316: Use temporary variable for struct device
ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()
ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log
saturation
sound/soc/intel/boards/bytcht_es8316.c | 37 +++++++++-----------------
1 file changed, 12 insertions(+), 25 deletions(-)
--
2.33.0
The fixed maximum size of IPC message does not allow for large
transfers, e.g. for filter data. Currently such messages will
be divided into smaller pieces and sent to firmware in multiple
chunks. For future IPC, this strategy is not suitable.
The maximum IPC message size is limited by host box size which
can be known when firmware is ready, so the fw_ready callback
can allocate IPC messages with platform-specific sizes instead
of the current fixed-size.
To be compatible with released firmware, current platforms will
still use SOF_IPC_MSG_MAX_SIZE. For future platforms, there will
be a new fw_ready function and the platform-specific allocation
will take place there.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-Id: <20211008093836.28210-1-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20211007164523.27094-5-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
First of all, replace indexed API by plain one since we have index 0.
Second, switch to optional variant and drop duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20211007164523.27094-4-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20211007164523.27094-3-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Access to platform data via dev_get_platdata() getter to make code cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20211007164523.27094-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) requires
hardware-resetting the codec by driving a reset-gpio. This series adds
support for it through an optional reset-gpios property.
v4:
* Correctly assert/deassert the GPIO states
* Wait for the i2c port to be ready after reset
* Reset device when removed
v3:
* Fix indentation on the dev_err_probe line
v2:
* Use dev_err_probe instead of dev_err
Alejandro Tafalla (2):
ASoC: max98927: Handle reset gpio when probing i2c
dt-bindings: sound: max98927: Add reset-gpios optional property
.../devicetree/bindings/sound/max9892x.txt | 3 +++
sound/soc/codecs/max98927.c | 25 +++++++++++++++++++
sound/soc/codecs/max98927.h | 1 +
3 files changed, 29 insertions(+)
--
2.33.0
Hi,
The aim of this series is to clean up, make it easier to interpret and less
'chatty' prints aimed for debugging errors.
For example currently the DSP/IPC dump is printed every time we have an IPC
timeout and it is posible to lost the first and more indicative dump to find the
rootcause.
Regards,
Peter
---
Peter Ujfalusi (18):
ASoC: SOF: debug: Swap the dsp_dump and ipc_dump sequence for
fw_exception
ASoC: SOF: ipc and dsp dump: Add markers for better visibility
ASoC: SOF: Print the dbg_dump and ipc_dump once to reduce kernel log
noise
ASoC: SOF: loader: Print the DSP dump if boot fails
ASoC: SOF: intel: atom: No need to do a DSP dump in atom_run()
ASoC: SOF: debug/ops: Move the IPC and DSP dump functions out from the
header
ASoC: SOF: debug: Add SOF_DBG_DUMP_OPTIONAL flag for DSP dumping
ASoC: SOF: intel: hda-loader: Use snd_sof_dsp_dbg_dump() for DSP dump
ASoC: SOF: Drop SOF_DBG_DUMP_FORCE_ERR_LEVEL and sof_dev_dbg_or_err
ASoC: SOF: debug: Print out the fw_state along with the DSP dump
ASoC: SOF: ipc: Re-enable dumps after successful IPC tx
ASoC: SOF: ops: Force DSP panic dumps to be printed
ASoC: SOF: Introduce macro to set the firmware state
ASoC: SOF: intel: hda: Drop 'error' prefix from error dump functions
ASoC: SOF: core: Clean up snd_sof_get_status() prints
ASoC: SOF: loader: Drop SOF_DBG_DUMP_REGS flag when firmware start
fails
ASoC: SOF: Intel: hda-loader: Drop SOF_DBG_DUMP_REGS flag from
dbg_dump calls
ASoC: SOF: Intel: hda: Dump registers and stack when SOF_DBG_DUMP_REGS
is set
Pierre-Louis Bossart (1):
ASoC: SOF: core: debug: force all processing on primary core
sound/soc/sof/core.c | 24 ++++++-------
sound/soc/sof/debug.c | 61 ++++++++++++++++++++++++++++++--
sound/soc/sof/intel/atom.c | 5 +--
sound/soc/sof/intel/hda-loader.c | 11 +++---
sound/soc/sof/intel/hda.c | 16 +++------
sound/soc/sof/ipc.c | 10 ++++--
sound/soc/sof/loader.c | 11 ++++--
sound/soc/sof/ops.c | 3 ++
sound/soc/sof/ops.h | 12 +------
sound/soc/sof/pm.c | 6 ++--
sound/soc/sof/sof-priv.h | 31 ++++++++++------
sound/soc/sof/topology.c | 6 ++++
12 files changed, 131 insertions(+), 65 deletions(-)
--
2.33.0
Hello,
this is version 5 of the I2S/TDM driver patchset. A big thanks
to everyone who has provided their valuable feedback so far.
Changes in v5:
driver:
- change comment style of the first comment to C++ style
- make refcount non-atomic, as it's only ever used inside
a spinlock
- use newer SND_SOC_DAIFMT_CB* defines
- change ternary statements to if/else conditions
- make _clk_compensation_put return 1 if clock changed
- implement set_bclk_ratio callback
- always set half frame sync mode in TDM mode
- automatically enable mclk-calibrate mode when the clocks for
it are specified in the device tree
bindings:
- add Reviewed-by: Rob Herring
- drop rockchip,frame-width property (done by set_bclk_ratio)
- drop rockchip,fsync-half-frame property
- drop rockchip,mclk-calibrate property
dts:
- drop empty codec block from Quartz64 device tree
Changes in v4:
driver:
- factor TDE/RDE enable/disable into their own inlined functions
- add an RDE disable in a location where it looks like it was
forgotten (rxctrl else), judging by corresponding TDE code
- remove parentheses around CLK_PPM_MIN/MAX values
- wording + titlecasing in the clock compensation control
- use if statement in precious_reg instead
- refactor rockchip_i2s_io_multiplex to have the switch statements
in a function call to make the function less unwieldy
- get rid of IS_ERR checks around clk enable/disable calls where
already checked before by the probe
- reworded some error message strings
- fix potential deadlock in txrxctrl found by Sugar Zhang
using spin_lock_irqsave
- fix potential deadlock in trcm_mode found by Sugar Zhang
using spin_lock_irqsave
- use devm_platform_get_and_ioremap_resource in probe
- only set DMA things if controller has capture/playback ability.
Did not move this into init_dai because I'd then need to pass in
the res and probe it earlier in the function, and it's also used
elsewhere in the probe function
- use _get_optional_exclusive for reset controls, as some controllers
only have capture or playback capability
bindings:
- remove status = "okay" since that's the default
- change the path configs to be an enum
- rename "foo" to "bus"
- make resets optional as controller may lack either playback or
capture capability, and therefore also doesn't have a reset.
At least one reset is still required, because a controller with
no playback and no capture is not very useful
Changes in v3:
driver:
- alphabetically sort includes
- check pm_runtime_get_sync return value, act on it
- remove unnecessary initialisers in set_fmt
- use udelay(15) in retry code: 10 retries * 15 = 150, so at worst
we wait the full i2s register access delay
- fix some weird returns to return directly
- use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP, also put
__maybe_unused on the runtime callbacks
- use (foo) instead of foo in header macros for precedence reasons
- when using mclk-calibrate, also turn off/on those clocks during
suspend and resume operations
- remove mclk_tx and mclk_rx reenablement code in remove
- move hclk enablement further down the probe, and disable it
on probe failure
- make reset controls mandatory, since the bindings state this too
- use _exclusive for getting the reset controls
- change reset assert/deassert delays to both be 10 usec
(thank you Sugar Zhang!)
- properly prepare and enable all mclks in probe, especially before
calling clk_get_rate on them
- if registering PCM fails, also use the cleanup error path instead of
returning directly
- bring back playback and capture only but in the way Sugar Zhang
suggested it: set those modes depending on dma-names
- rework clock enablement in general. Probe now always enables these,
instead of relying on the pm resume thing
- add myself to MAINTAINERS for this driver
dt bindings:
- fix a description still mentioning clk-trcm in the schema
- document rockchip,io-multiplex, a property that describes the
hardware as having multiplexed I2S GPIOs so direction needs to
be changed dynamically
- document rockchip,mclk-calibrate, which allows specifying
different clocks for the two sample rate bases and switch between
them as needed
- dma-names now doesn't have a set order and items can be absent to
indicate that the controller doesn't support this mode
- add myself to MAINTAINERS for these bindings
Changes in v2:
- remove ad-hoc writeq and needless (and broken) optimisation in
reset assert/deassert. This wouldn't have worked on Big Endian,
and would've been pointless on any other platform, as the
overhead for saving one write was comparatively big
- fix various checkpatch issues
- get rid of leftover clk-trcm in schema
- set status = "okay" in example in schema instead of "disabled"
- change dma-names so rx is first, adjust device trees as necessary
- properly reference uint32-array for rx-route and tx-route
instead of uint32
- replace trcm-sync with two boolean properties, adjust DT changes
accordingly and also get rid of the header file
- get rid of rockchip,no-dmaengine. This was only needed for
some downstream driver and shouldn't be in the DT
- get rid of rockchip,capture-only/playback-only. Rationale being
that I have no way to test whether they're needed, and
unconditionally setting channels_min to 0 breaks everything
- change hclk description in "clocks"
Nicolas Frattaroli (4):
ASoC: rockchip: add support for i2s-tdm controller
ASoC: dt-bindings: rockchip: add i2s-tdm bindings
arm64: dts: rockchip: add i2s1 on rk356x
arm64: dts: rockchip: add analog audio on Quartz64
.../bindings/sound/rockchip,i2s-tdm.yaml | 198 ++
MAINTAINERS | 7 +
.../boot/dts/rockchip/rk3566-quartz64-a.dts | 31 +-
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 26 +
sound/soc/rockchip/Kconfig | 11 +
sound/soc/rockchip/Makefile | 2 +
sound/soc/rockchip/rockchip_i2s_tdm.c | 1848 +++++++++++++++++
sound/soc/rockchip/rockchip_i2s_tdm.h | 398 ++++
8 files changed, 2520 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.c
create mode 100644 sound/soc/rockchip/rockchip_i2s_tdm.h
--
2.33.0
Recent changes in soc-pcm completely broke basic support for mixers on
Intel systems: the filters on BE states prevent the connection of a
second mixer input while the back-end is already active.
Rather than reverting the changes, which would be problematic for
Tegra systems, this patch suggests an additional filter which will
only apply to Tegra systems. This is a temporary solution which will
have to be revisited - additional issues have been reported with DPCM.
Fixes: 0c25db3f76 ('ASoC: soc-pcm: Don't reconnect an already active BE')
Suggested-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004212141.193136-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system plays a sound immediately after resuming from S3,
it could hear a little pop from headphones.
It is due to the HP was unmuted before the completion of
jack re-detection finished in parallel.
This patch adds a lock to make sure the HP unmute after jack detect handler,
and adds a few depop changes.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211007085519.12543-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds support for the rockchip i2s-tdm controller,
which enables audio output on the following rockchip SoCs:
- px30
- rk1808
- rk3308
- rk3566
- rk3568
- rv1126
This is a cleaned up version of the downstream vendor kernel's
driver. It can be enabled through the SND_SOC_ROCKCHIP_I2S_TDM
configuration option.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211001171531.178775-2-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch prepares the introduction of the compress API with SOF.
After each fragment is accepted by the DSP we need to inform
the userspace applications that they can send the next fragment.
This is done via snd_compr_fragment_elapsed.
Similar with the PCM case, in order to avoid sending an IPC before
the previous IPC is handled we need to schedule a delayed work to
call snd_compr_fragment_elapsed().
See snd_sof_pcm_period_elapsed.
To sum up this patch offers the following API to SOF code:
* snd_sof_compr_init_elapsed_work
* snd_sof_compr_fragment_elapsed
Note that implementation for compressed function is in a new file
selected via CONFIG_SND_SOC_SOF_COMPRESS invisible config option.
This option is automatically selected for platforms that support
the compress interface. For now only i.MX8 platforms support this.
For symmetry we introduce snd_sof_pcm_init_elapsed_work to setup
the work struct for PCM case.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes IMX use the newly introduced generic IPC ops
instead of imx specific ones, and removes the old IMX
ipc ops, as they are no longer needed.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This operations should be generic as there is nothing Intel
specific. This works well for NXP i.MX8 stream IPC ops.
We start by moving sof/intel/intel-ipc.c into sof/stream-ipc.c and
rename the functions to be generic.
Notice that we use newly introduced snd_sof_dsp_mailbox_read
instead of sof_mailbox_read, to make sure that we are not
bound to existing MMIO memory access, and we allow platform
to implement their own memory access routines.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to introduce snd_sof_mailbox_{read/write} in order to provide
a generic way for mailbox access. These routines are optional, each
platform can implement their own specific routines.
So far, all platforms use mmapped I/O thus they can use custom made
routines sof_mailbox_read / sof_mailbox_write that use MMIO.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004152147.1268978-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First thing the pipelines function which have "struct device *dev" as
parameter do is:
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
and in all cases the passed dev is actually coming from sdev->dev.
Skip this steps and pass directly the sdev to all pipelines related
functions as few of them already does this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006111651.10027-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.
Fixes: 0dcdf84289 ("ASoC: SOF: add a "core" parameter to widget loading functions")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006104041.27183-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of checking the fw_state to decide what information should be
printed, use the SOF_DBG_DUMP_REGS bit in the flags to dump registers and
stack.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cl_dsp_init() we are powering up the DSP, register dump is not valid.
In hda_dsp_cl_boot_firmware() we are downloading the firmware to DSP, again
the register dump is not a valid concept.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_dsp_run() failure indicates that the DSP did not even booted up,
thus asking for dumping registers at this point is not valid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-18-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the error prints when decoding the status in snd_sof_get_status():
Drop the "error:" prefixes from the prints,
Use %# to print hexadecimal numbers,
Reword some of the messages to be more precise,
For a known error print out the panic code as well,
For unknown error print only the panic code without the magic
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the 'error' prefix printed in hda_dsp_dump_ext_rom_status(),
hda_ipc_irq_dump() and hda_ipc_dump() as it gives no value to the
information we print.
The DSP and IPC dump is marked now, which makes the 'error' prefix more
redundant.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-16-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_set_fw_state() macro to wrap the sdev->fw_state management to allow
actions to be taken when certain state is set or when state is changing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-15-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a DSP panic happens we want to see the dumps.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dumps are silenced after an IPC tx timeout by default.
The IPC timeout can indicate severe error (firmware crash) or in some cases
it is less devastating and the firmware remains operational, the timeout
was due to a scheduling spike or other anomaly.
In any case consequent IPC timeouts will not print dumps but if any IPC do
succeed than we should re-enable the dumps to print dumps the next time
a timeout might happen.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw state can be an important information along with the DSP dump.
Print it out before the dump.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_dev_dbg_or_err() is only used by intel/hda.c when dumping dsp
debug information.
It was used to print the extended rom status in either dev_dbg (during
retries) and finally with dev_err, but other lines were printed with
dev_err regardless.
Since we now only print the dump once, the flag and the macros is no longer
needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not call directly the hda_dsp_dump(), use the generic wrapper instead
to provide consistent output.
Mark the DSP dumps as optional to not spam the kernel log with the
exception of the last dump in case the DSP fails to run.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new SOF_DBG_DUMP_OPTIONAL flag can be used to mark a DSP dump that
should only be printed when the SOF_DBG_PRINT_ALL_DUMPS sof_core_debug
flag is set, otherwise it should be ignored and not printed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be usable in platform code, move the IPC and DSP dump function to
debug.c and export it in a similar way as the snd_sof_handle_fw_exception()
Make the snd_sof_ipc_dump() static as it is only used in debug.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core already prints a dump if the DSP failed to start in
snd_sof_run_firmware(), there is no need to print it locally as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It can be useful to print the DSP dump from the core in case the DSP boot
failed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print the dump more than once to keep the kernel log cleaner in case
of a firmware failure.
When the DSP is rebooted due to suspend or runtime_suspend reset the flags
to re-enable the dump prints.
Add also a debug flag to print all dumps to get more coverage if needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add markers to identify the start and end of the IPC and DSP dumps in the
kernel log.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_dsp_panic() only prints dsp_dump followed by flushing the DMA trace
buffer.
To retain similar 'sequence' first do an ipc_dump then the dsp_dump and
finally flush the trace buffer in case of fw_exception.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The topology file currently provides information on which
pipeline/processing is to be scheduled on which DSP core.
To help diagnose potential issues, this patch provides an override of
the 'core' tokens to use the primary core (typically core0). Of course
this may result in a Core0 activity that exceeds hardware
capabilities, so this should only be used when the total processing
fits on DSP - possibly using firmware mockup processing and stubs.
No new dmesg log was added to avoid adding noise during topology
parsing, but the existing logs will show the primary core being used.
This is strictly for validation/debug, products should NEVER use this
override, the topology is assumed to be the description of the
firmware graph.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006110645.26679-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The put callback of a kcontrol is supposed to return 1 when the value
is changed, and this will be notified to user-space. However, some
DAPM kcontrols always return 0 (except for errors), hence the
user-space misses the update of a control value.
This patch corrects the behavior by properly returning 1 when the
value gets updated.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_err_probe() avoids printing into log when the deferred probe is invoked.
This is possible when clock provider is pending to appear.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211006150428.16434-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First of all, replace indexed API by plain one since we have index 0.
Second, switch to optional variant and drop duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211006150428.16434-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Access to platform data via dev_get_platdata() getter to make code cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.com>
Link: https://lore.kernel.org/r/20211006150428.16434-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is to fix audio 3.5mm jack detection failure
on wcd938x codec based target.
Fixes: bcee7ed09b (ASoC: codecs: wcd938x: add Multi Button Headset Control support)
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1633614619-27026-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When a stream is in the implicit feedback mode, it's more or less tied
with a capture stream. Passing SNDRV_PCM_INFO_JOINT_DUPLEX may help
for user-space to understand the situation.
Link: https://lore.kernel.org/r/20211007083528.4184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the case of hot-disconnection of a PCM device, all file operations
except for close should be rejected. This patch adds more sanity
checks in the file operation code paths.
Link: https://lore.kernel.org/r/20211006142214.3089-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that a few recent AMD systems show the codec configuration
errors at the early boot, while loading the driver at a later stage
works magically. Although the root cause of the error isn't clear,
it's certainly not bad to allow retrying the codec probe in such a
case if that helps.
This patch adds the capability for retrying the probe upon codec probe
errors on the certain AMD platforms. The probe_work is changed to a
delayed work, and at the secondary call, it'll jump to the codec
probing.
Note that, not only adding the re-probing, this includes the behavior
changes in the codec configuration function. Namely,
snd_hda_codec_configure() won't unregister the codec at errors any
longer. Instead, its caller, azx_codec_configure() unregisters the
codecs with the probe failures *if* any codec has been successfully
configured. If all codec probe failed, it doesn't unregister but let
it re-probed -- which is the most case we're seeing and this patch
tries to improve.
Even if the driver doesn't re-probe or give up, it will go to the
"free-all" error path, hence the leftover codecs shall be disabled /
deleted in anyway.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801
Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This
fixes the issue of the internal Microphone not working after booting
another OS.
When booting a certain another OS this barebone keeps some coeff settings
even after a cold shutdown. These coeffs prevent the microphone detection
from working in Linux, making the Laptop think that there is always an
external microphone plugged-in and therefore preventing the use of the
internal one.
The relevant indexes and values where gathered by naively diff-ing and
reading a working and a non-working coeff dump.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One quirk for a Dell TigerLake/SoundWire device, and initial support
for platforms based on the ES8336 codec (aka ES8316). For full
functionality, an update of the codec driver will be needed.
Pierre-Louis Bossart (5):
ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on
ES8336 codec
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on
ES8336 codec
ASoC: Intel: add machine driver for SOF+ES8336
ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp
ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45
sound/hda/intel-dsp-config.c | 22 +-
sound/soc/intel/boards/Kconfig | 14 +
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/sof_es8336.c | 569 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw.c | 10 +
.../intel/common/soc-acpi-intel-bxt-match.c | 6 +
.../intel/common/soc-acpi-intel-glk-match.c | 7 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 47 ++
8 files changed, 674 insertions(+), 3 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_es8336.c
--
2.25.1
With the chip shortage, some GeminiLake Intel-based designs were
respun and now rely on codecs that need the SSP bit clock turned on in
the hw_params stage, not the trigger stage. This patchset mirrors the
flags added in the SOF DAI_CONFIG IPC, and sets the flags when this
capability is indicated as necessary in the topology files where the
SSP configuration is stored.
We initially considered a more generic solution with an on-demand SSP
clock activation using the common clock framework. This would be a
more elegant solution indeed, but it would have required more
intrusive changes that would conflict with the SOF multi-client
support (in-development), and more backport hassles on product
branches. The on-demand activation of clocks is still a desired
feature that will be enabled at a later point.
Bard Liao (1):
ASoC: SOF: dai-intel: add SOF_DAI_INTEL_SSP_CLKCTRL_MCLK/BCLK_ES bits
Pierre-Louis Bossart (4):
ASoC: SOF: dai: mirror group_id definition added in firmware
ASoC: SOF: dai: include new flags for DAI_CONFIG
ASoC: SOF: Intel: hda: add new flags for DAI_CONFIG
ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic
pipelines
include/sound/sof/dai-intel.h | 4 ++
include/sound/sof/dai.h | 10 ++++-
sound/soc/sof/intel/hda-dai.c | 82 ++++++++++++++++++++++++++++++++++-
sound/soc/sof/intel/hda.c | 6 +++
sound/soc/sof/sof-audio.c | 4 ++
5 files changed, 103 insertions(+), 3 deletions(-)
--
2.25.1
This allows specifying an alternate path for SOF firmware or
SOF topology.
This is particularly useful for i.MX when running Linux vs Android.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211005071949.1277613-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct cz_aif1_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211004224514.8783-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For debug and community support, it's useful to expose a kernel
parameter to prevent the use of dynamic pipelines exposed in a
topology file, or conversely to force an existing topology to use
dynamic pipelines.
Add an override bit and an enable bit which is valid only when the
override is set.
For products, the intent is that the topology file defines the
behavior, these two bits are only intended for diagnosis and
performance checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211004212729.199550-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We log most of the SSP configurations except the clks_control. This
will be used to enable bclk/mclk early start so it's useful to show
the information to the user.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004212729.199550-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to keep the widget use_count balanced, make sure the DAI
widgets are allocated once in hw_params and released in hw_free. A
'setup' status flag is used to deal with cases where the .hw_params
callback is invoked multiple times, and likewise with cases where
hw_free is invoked without hw_params being called first (which can
happen if the FE hw_params fails).
In addition, this patch frees the widgets in the suspend transition,
and reallocates them in the .prepare callback. The 'setup' flag helps
in this case differentiate between resume (setup needed) and
xruns (setup not needed).
This balanced operation was not needed previously but will be required
when SOF dynamic pipelines are enabled.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211004171430.103674-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI_CONFIG is used for both hw_params and hw_free. Use flags to
specify what stage the configuration applies to.
the DAI_CONFIG IPC may be sent also during the widget setup so each
flag is cleared after the IPC to restore the state.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211004171430.103674-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add machine driver to support APL/GLK/TGL platforms.
The TGL platform supports DMIC, APL and GLK do not.
Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A number of devices, such as the "Chuwi HI10x" and "UNIQCELL Q15.6",
are based on APL/GLK with an I2C/I2S ES8336 codec.
Add table to find topology and firmware files.
Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In power save mode, the recording voice from headset mic will 2s more delay.
Add this patch will solve this issue.
[ minor coding style fix by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Scarlett device series from Focusrite Novation seem requiring the
sample rate validations as we've done for MOTU devices; otherwise the
driver probes invalid audioformat entries that contain the sample
rates that actually don't work, and this may result in an incomplete
setup as reported recently.
This patch adds the needed quirk flag for enabling the sample rate
validation for Focusrite Novation devices.
Fixes: fe773b8711 ("ALSA: usb-audio: workaround for iface reset issue")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Link: https://lore.kernel.org/r/20211004074050.28241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set the card.components string using the new nau8824_components() helper
which returns a components string based on the DMI quirks inside the
nau8824 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices using the NAU8824 have only one speaker. To still have things
working properly this requires the left + right channels to both be mixed
to the left speaker output.
This mixer setup is done by userspace based on UCM profiles. But this
requires userspace to know that there is a mono-speaker. Add a helper
function (for the machine driver) to get a components string providing
this info.
This is done inside the codec driver because the codec driver already
has a DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.
And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NAU8824_JACK_LOGIC define was wrong, for active high jack-detect
to work bit 1 needs to be set, rather then bit 0.
The correct bit was found in the Android kernel source dump for
a Cyberbook T116 tablet; and this was also tested on that same tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211002211459.110124-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This
fixes the issue of the devices internal Speaker not working.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The string "Clevo X170" is not enough to unambiguously identify the correct
device.
Fixing it so another Clevo barebone name starting with "X170" can be added
without causing confusion.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver is for codec NAU88L21 of Nuvoton Technology Corporation.
The NAU88L21 is an ultra-low power high performance audio codec that
supports both analog and digital audio functions.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20211001103108.3297848-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
The previous, v2 of this series was sent by Daniel Baluta:
https://lore.kernel.org/alsa-devel/20210917143659.401102-1-daniel.baluta@oss.nxp.com/
We have agreed that it might be better that someone from Intel is going to take it
from here as we already have the infrastructure up to test and verify the
dynamic pipelines support.
Changes since v2 (sent by Daniel Baluta):
- patch 10: Fix NULL point dereference in hda_dai_update_config()
- I have kept Daniel's SoB for the series.
Changes since v1:
- Signed-off-by tag added by Daniel
This series implements initial support for dynamic pipelines to setup/teardown
pipeline as needed when a PCM is open/closed.
Initially dynamic pipelines are only supported with single core setup which will
be expanded with a follow-up series.
Review with SOF community at
https://github.com/thesofproject/linux/pull/2794
The feature has been merged on 1st of April to sof-dev, all issues found since
has been fixed and squashed to this upstream series.
Regards,
Peter
---
Ranjani Sridharan (12):
ASoC: topology: change the complete op in snd_soc_tplg_ops to return
int
ASoC: SOF: control: Add access field in struct snd_sof_control
ASoC: SOF: topology: Add new token for dynamic pipeline
ASoC: SOF: sof-audio: add helpers for widgets, kcontrols and dai
config set up
AsoC: dapm: export a couple of functions
ASoC: SOF: Add new fields to snd_sof_route
ASoC: SOF: restore kcontrols for widget during set up
ASoC: SOF: Don't set up widgets during topology parsing
ASoC: SOF: Introduce widget use_count
ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC
ASoC: SOF: Add support for dynamic pipelines
ASoC: SOF: topology: Add kernel parameter for topology verification
include/sound/soc-dpcm.h | 1 +
include/sound/soc-topology.h | 2 +-
include/uapi/sound/sof/tokens.h | 1 +
sound/soc/intel/skylake/skl-topology.c | 6 +-
sound/soc/soc-dapm.c | 2 +
sound/soc/soc-pcm.c | 4 +-
sound/soc/soc-topology.c | 10 +-
sound/soc/sof/intel/hda-dai.c | 174 +++---
sound/soc/sof/intel/hda.c | 177 ++++--
sound/soc/sof/intel/hda.h | 5 +
sound/soc/sof/ipc.c | 22 +
sound/soc/sof/pcm.c | 58 +-
sound/soc/sof/pm.c | 4 +-
sound/soc/sof/sof-audio.c | 709 +++++++++++++++++++------
sound/soc/sof/sof-audio.h | 32 +-
sound/soc/sof/sof-priv.h | 1 +
sound/soc/sof/topology.c | 362 +++++--------
17 files changed, 1032 insertions(+), 538 deletions(-)
--
2.33.0
Implement SPDIF bypass mode. It implies internal SoC
routing of SPDIF input signal to SPDIF output signal. The
test bed requires two boards: B1 configured in bypass mode,
and B2 to feed B1 SPDIF RX port and read B1 SPDIF TX port:
B2 TX -> B1 RX,
B2 RX <- B1 TX.
The test procedure:
a) Boot both boards
b) B2: start "arecord <spdifcard> -r 48kHz | aplay <local DAC>"
c) B2: start "aplay <spdifcard> -r 48kHz <2ch 48kHz audio file>"
d) B1: enable bypass mode:
amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' on
e) B2: check DAC audio, make sure the same sample rate is used at
steps b) and c), in example above the rate is 48kHz.
f) B1: try to run "aplay" or "arecord" on imxspdif card while in
bypass mode - both must fail until bypass mode is disabled
g) B1: disable bypass mode:
amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' off
h) B1: check the usual playback and capture on imxspdif card.
During this test try to set bypass mode - must not be allowed
while playback or capture is running.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1632649760-1651-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a kernel debug flag to enable a one-shot topology
verification for all pipelines including the dynamic
ones. If the debug flag is set, all the topology
component loading will be verified during the complete
callback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for dynamic pipelines by modifying the PCM
hw_params ioctl implementation to determine the widgets
required for a PCM stream by querying the list of
connected DAPM widgets. This list is saved as part of
snd_sof_pcm_stream struct and will be used to setup the widgets.
The sof_widget_list_setup/free routines setup and free connected
DAPM widgets when a PCM is opened/closed. These routines accept
a list of connected DAPM widgets as input and determine the SOF
widgets, their corresponding pipeline widgets and connections
between them that need to be setup before the PCM is triggered.
Please note that the dynamic pipeline feature will only be enabled
for those pipelines whose dynamic_pipeline_widget flag is set in
topologies. Add a new token called SOF_TKN_SCHED_DYNAMIC_PIPELINE
that when set in topology will be applied to the
dynamic_pipeline_widget flag of the pipeline widget.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the implementation of the dynamic pipeline feature, widgets
will only be setup when a PCM is opened during the
hw_params ioctl. The BE hw_params callback is responsible for
sending the DAI_CONFIG for the DAI widgets in the DSP.
With dynamic pipelines, the DAI widgets will need to set up
first before sending the DAI_CONFIG IPC in the BE hw_params.
Update the BE hw_params/hw_free callbacks for all ALH, HDA and SSP
DAIs to set up/free the DAI widget before/after DAI_CONFIG IPC.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field, use_count to struct snd_sof_widget to keep track
of the usage count for each widget. Since widgets can belong to
multiple pipelines, this field will ensure that the widget
is setup only when the first pipeline that needs it is started
and freed when the last pipeline that needs it is stopped. There is
no need to protect the widget use_count access as the core already
handles mutual exclusion at the PCM level.
Add a new helper sof_widget_free() to handle freeing the SOF
widgets and export the sof_widget_setup/free() functions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting dynamic pipelines, move the
widget setup, DAI config IPCs to the complete callback
during topology loading. For current topology where all
the pipelines are static, all the pipelines will be set up
during complete. For topologies with dynamic and static pipelines,
this will enable setting up only the static ones during
topology loading. Reuse the sof_restore_pipelines() function for
this purpose and rename it to sof_set_up_pipelines().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore kcontrols for each widget after it has been set up
successfully.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two new fields to save the source widget and sink widget
pointers in struct snd_sof_route to make it easier to look up
routes by source/sink widget. Also, add a flag to indicate
if the route has been set up in the DSP. These will be used
when the dynamic pipeline feature is implemented and routes
will have to be set up at run time.
Also, add a new sof_tear_down_pipelines() callback, that will
used to reset the set up status for all routes during suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export a couple of DAPM functions that can be used by
ASoC drivers to determine connected widgets when a PCM
is started.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the existing code to use helper functions to
set up/free widgets, send dai config and set up kcontrols for
widgets. These will be reused later on for setting up widgets in
the connected DAPM widgets list for a particular PCM when the
dynamic pipeline feature is implemented.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Today, we set up all widgets required for all PCM streams
at the time of topology parsing even if they are not
used. An optimization would be to only set up the widgets
required for currently active PCM streams. This would give
the FW the opportunity to power gate unused memory blocks,
thereby saving power.
For dynamic pipelines, the widgets in the connected DAPM path
for each PCM will need to be set up at runtime. This patch
introduces a new token, DYNAMIC_PIPELINE, for scheduler type
widgets that indicate whether a pipeline should be set up
statically during topology load or at runtime when the PCM is
opened. Introduce a new field called dynamic_pipeline_widget
in struct snd_sof_widget to save the value of the parsed token.
The token is set only for the pipeline (scheduler type)
widget and must be propagated to all widgets in the same
pipeline during topology load. Introduce another field called
pipe_widget in struct snd_sof_widget that saves the pointer to
the scheduler widget with the same pipeline ID as that of the
widget. This field is populated when the pipeline completion
callback is invoked during topology loading.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new field to save the access setting for all controls
in struct snd_sof_control. This will be used to ensure that
only widgets belonging to static pipelines have volatile
controls.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the SOF driver, the operations performed in the complete callback
can fail and therefore topology loading should return an error in
such cases. So, change the signature of the complete op
in struct snd_soc_tplg_ops to return an int to return the error.
Also, amend the complete callback functions in the SOF driver and
the SKL driver to conform with the new signature.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210927120517.20505-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct iapq8096_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211001115030.10402-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system resumes from S3, if the system plays a beep,
there is continuous "Zizi.." noise from HP that could be heard.
It is caused by the SAR mode switch during the combo jack
re-detection which be executed parallelly in a workqueue
after the system resumes.
This patch changes the behavior of SAR mode switch to
avoid this issue.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211001074113.2223-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When codec's ASRC was enabled, the DA and AD filters use
the reference clk which tracks the I2S clks.
And if the I2S clks' timing of open and close are not expected,
this patch allows the filters to switch to use sysclk if
ASRC's ref clks disappeared and could fix the below possible issues:
1. Avoid DA filter to keep surplus samples.
2. Avoid that AD filter works failed during dapm's power on.
For example,
if I2S clks were closed before dacdat during playback off
due to jack unplug, it causes ref clks disappeared and
DA filter remained some samples which will produce pop noise
on the next HP playback.
ASRC auto-disable could clear the samples during the playback off.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211001074113.2223-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
platforms->of_node and codes->of_node are assigned in probe function,
and of_node_put is called at the end of probe function, because of_node
seems to be not used after probe functon
In this patch, of_node_put is moved to platform remove function in case
of_node is used at any occasions after probe function in the future.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211001031601.3953-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a board config adl_mx98360a_rt5682 to support alc5682 headset
codec and max98360a speaker amplifier. Follow Intel BT offload design
by connecting alc5682 to SSP0 and max98360a to SSP1.
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211001150316.414141-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct tegra_machine_snd_ops is only assigned to the ops field in the
snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20211001114517.6752-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The headphone mic is not working on Dell Latitude laptops with ALC3254.
The codec vendor id is 0x10ec0295 and share the same pincfg as defined
in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will
be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is
using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
need to be applied instead.
Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before
a generic fixup comes out.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.
The commit 5e35dc0338 and subsequent
1a15718b41 were meant to clear up noise.
Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f64125
Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DAI clock is only used in I2S mode, to make it clear
and to fix clock resource release issue, we move CCF clock
related code to rt5682_i2c_probe to fix clock
register/unregister issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210929054344.12112-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8ULP the audio interface and codec are controlled
by Cortex-M domain, Cortex-M core provides audio service
over rpmsg.
The rpmsg audio function is almost same as i.MX7ULP
platform, so share same configuration.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1632972413-22130-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove a repeated "#include <linux/firmware.h>" in line 32.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210929123217.5240-1-guozhengkui@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have growing number of options under SND_SOC_SOF_TOPLEVEL as SOF
adaptation is growing (Intel, NXP, AMD and Mediatek) and new features are
added.
It will make the menuconfig user experience much cleaner if we move the
SOF options under a separate page.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210930070438.16846-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 1d25684e22 ("ASoC: nau8824: Fix open coded prefix handling")
replaced the nau8824_dapm_enable_pin() helper with direct calls to
snd_soc_dapm_enable_pin(), but the helper was using
snd_soc_dapm_force_enable_pin() and not forcing the MICBIAS + SAR
supplies on breaks headphone vs headset and button-press detection.
Replace the snd_soc_dapm_enable_pin() calls with
snd_soc_dapm_force_enable_pin() to fix this.
Cc: stable@vger.kernel.org
Fixes: 1d25684e22 ("ASoC: nau8824: Fix open coded prefix handling")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210929201512.460360-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
John Keeping reported and posted a patch for a potential UAF in
rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be
called after the associated rawmidi object got already freed.
After a deeper look, it turned out that the bug is rather the
incorrect private_free call order for a snd_seq_device. The
snd_seq_device private_free gets called at the release callback of the
sequencer device object, while this was rather expected to be executed
at the snd_device call chains that runs at the beginning of the whole
card-free procedure. It's been broken since the rewrite of
sequencer-device binding (although it hasn't surfaced because the
sequencer device release happens usually right along with the card
device release).
This patch corrects the private_free call to be done in the right
place, at snd_seq_device_dev_free().
Fixes: 7c37ae5c62 ("ALSA: seq: Rewrite sequencer device binding with standard bus")
Reported-and-tested-by: John Keeping <john@metanate.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While draining a stream, ALSA PCM core stops the stream by issuing
snd_pcm_stop() after all data has been sent out. And, at PCM trigger
stop, currently USB-audio driver kills the in-flight URBs explicitly,
then at sync-stop ops, sync with the finish of all remaining URBs.
This might result in a drop of the drained samples as most of
USB-audio devices / hosts allow relatively long in-flight samples (as
a sort of FIFO).
For avoiding the trimming, this patch changes the stream-stop behavior
during PCM draining state. Under that condition, the pending URBs
won't be killed. The leftover in-flight URBs are caught by the
sync-stop operation that shall be performed after the trigger-stop
operation.
Link: https://lore.kernel.org/r/20210929080844.11583-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is another attempt to improve further the handling of playback
stream in the low latency mode. The latest workaround in commit
4267c5a8f3 ("ALSA: usb-audio: Work around for XRUN with low latency
playback") revealed that submitting URBs forcibly in advance may
trigger XRUN easily. In the classical mode, this problem was avoided
by practically delaying the submission of the actual data with the
pre-submissions of silent data before triggering the stream start.
But that is exactly what we want to avoid.
Now, in this patch, instead of the previous workaround, we take a
similar approach as used in the implicit feedback mode. The URBs are
queued at the PCM trigger start like before, but we check whether the
buffer has been already filled enough before each submission, and
stop queuing if the data overcomes the threshold. The remaining URBs
are kept in the ready list, and they will be retrieved in the URB
complete callback of other (already queued) URBs. In the complete
callback, we try to fill the data and submit as much as possible
again. When there is no more available in-flight URBs that may handle
the pending data, we'll check in PCM ack callback and submit and
process URBs there in addition. In this way, the amount of in-flight
URBs may vary dynamically and flexibly depending on the available data
without hitting XRUN.
The following things are changed to achieve the behavior above:
* The endpoint prepare callback is changed to return an error code;
when there is no enough data available, it may return -EAGAIN.
Currently only prepare_playback_urb() returns the error.
The evaluation of the available data is a bit messy here; we can't
check with snd_pcm_avail() at the point of prepare callback (as
runtime->status->hwptr hasn't been updated yet), hence we manually
estimate the appl_ptr and compare with the internal hwptr_done to
calculate the available frames.
* snd_usb_endpoint_start() doesn't submit full URBs if the prepare
callback returns -EAGAIN, and puts the remaining URBs to the ready
list for the later submission.
* snd_complete_urb() treats the URBs in the low-latency mode similarly
like the implicit feedback mode, and submissions are done in
(now exported) snd_usb_queue_pending_output_urbs().
* snd_usb_queue_pending_output_urbs() again checks the error value
from the prepare callback. If it's -EAGAIN for the normal stream
(i.e. not implicit feedback mode), we push it back to the ready list
again.
* PCM ack callback is introduced for the playback stream, and it calls
snd_usb_queue_pending_output_urbs() if there is no in-flight URB
while the stream is running. This corresponds to the case where the
system needs the appl_ptr update for re-submitting a new URB.
* snd_usb_queue_pending_output_urbs() and the prepare EP callback
receive in_stream_lock argument, which is a bool flag indicating the
call path from PCM ack. It's needed for avoiding the deadlock of
snd_pcm_period_elapsed() calls.
* Set the new SNDRV_PCM_INFO_EXPLICIT_SYNC flag when the new
low-latency mode is deployed. This assures catching each applptr
update even in the mmap mode.
Fixes: 4267c5a8f3 ("ALSA: usb-audio: Work around for XRUN with low latency playback")
Link: https://lore.kernel.org/r/20210929080844.11583-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In theory, stop_urbs() may be called concurrently.
Although we have the state check beforehand, it's safer to apply
ep->lock during the critical list head manipulations.
Link: https://lore.kernel.org/r/20210929080844.11583-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is yet more preparation for the upcoming changes.
Extend snd_usb_endpoint_next_packet_size() to check the available
frames and return -EAGAIN if the next packet size is equal or exceeds
the given size. This will be needed for avoiding XRUN during the low
latency operation.
As of this patch, avail=0 is passed, i.e. the check is skipped and no
behavior change.
Link: https://lore.kernel.org/r/20210929080844.11583-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a playback stream runs in the implicit feedback mode, its
operation is passive and won't start unless the capture packet is
received. This behavior contradicts with the low-latency playback
mode, and we should turn off lowlatency_playback flag accordingly.
In theory, we may take the low-latency mode when the playback-first
quirk is set, but it still conflicts with the later operation with the
fixed packet numbers, so it's disabled all together for now.
Link: https://lore.kernel.org/r/20210929080844.11583-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The free-wheel stream operation like dmix may not update the appl_ptr
appropriately, and it doesn't fit with the low-latency playback mode.
Disable the low-latency playback operation when the stream is set up
in such a mode.
Link: https://lore.kernel.org/r/20210929080844.11583-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preparation patch for the upcoming low-latency improvement
changes.
Rename early_playback_start flag with lowlatency_playback as it's more
intuitive. The new flag is basically a reverse meaning.
Along with the rename, factor out the code to set the flag to a
function. This makes the complex condition checks simpler.
Also, the same flag is introduced to snd_usb_endpoint, too, that is
carried from the snd_usb_substream flag. Currently the endpoint flag
isn't still referred, but will be used in later patches.
Link: https://lore.kernel.org/r/20210929080844.11583-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio driver tries to sync with the clear of all pending URBs in
wait_clear_urbs(), and it waits for all bits in active_mask getting
cleared. This works fine for the normal operations, but when a stream
is managed in the implicit feedback mode, there is still a very thin
race window: namely, in snd_complete_usb(), the active_mask bit for
the current URB is once cleared before re-submitted in
queue_pending_output_urbs(). If wait_clear_urbs() is called during
that period, it may pass the test and go forward even though there may
be a still pending URB.
For covering it, this patch adds a new counter to each endpoint to
keep the number of in-flight URBs, and changes wait_clear_urbs()
checking this number instead. The counter is decremented at the end
of URB complete, hence the reference is kept as long as the URB
complete is in process.
Link: https://lore.kernel.org/r/20210929080844.11583-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a single clock source is shared among several endpoints, we have
to keep the same rate on all active endpoints as long as the clock is
being used. For dealing with such a case, this patch adds one more
check in the hw params constraint for the rate to take the shared
clocks into account. The current rate is evaluated from the endpoint
list that applies the same clock source.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190418
Link: https://lore.kernel.org/r/20210929080844.11583-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289
audio just like its sibling product XPS 9510, so it requires the same
quirk to enable woofer output. Tested on my Dell Precision 5560.
Signed-off-by: John Liu <johnliu55tw@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
