IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The APQN bindings complete completion was used to reflect
that 1st the AP bus initial scan is done and 2nd all the
detected APQNs have been bound to a device driver.
This was a single-shot action. However, as the AP bus
supports hot-plug it may be that new APQNs appear reflected
as new AP queue and card devices which need to be bound
to appropriate device drivers. So the condition that
all existing AP queue devices are bound to device drivers
may go away for a certain time.
This patch now checks during AP bus scan for maybe new AP
devices appearing and does a re-init of the internal completion
variable. So the AP bus function ap_wait_apqn_bindings_complete()
now may block on this condition variable even later after
initial scan is through when new APQNs appear which need to
get bound.
This patch also moves the check for binding complete invocation
from the probe function to the end of the AP bus scan function.
This change also covers some weird scenarios where during a
card hotplug the binding of the card device was sufficient for
binding complete but the queue devices where still in the
process of being discovered.
As of now this change has no impact on existing code. The
behavior change in the now later bindings complete should not
impact any code (and has been tested so far). The only
exploiter is the zcrypt function zcrypt_wait_api_operational()
which only initial calls ap_wait_apqn_bindings_complete().
However, this new behavior of the AP bus wait for APQNs bindings
complete function will be used in a later patch exploiting
this for the zcrypt API layer.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Update vfio_ap_mdev_reset_queue() to handle an unexpected checkstop (hardware error) the
same as the deconfigured case. This prevents unexpected and unhelpful warnings in the
event of a hardware error.
We also stop lying about a queue's reset response code. This was originally done so we
could force vfio_ap_mdev_filter_matrix to pass a deconfigured device through to the guest
for the hotplug scenario. vfio_ap_mdev_filter_matrix is instead modified to allow
passthrough for all queues with reset state normal, deconfigured, or checkstopped. In the
checkstopped case we choose to pass the device through and let the error state be
reflected at the guest level.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215153144.14747-1-jjherne@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot
flag there as well, and then use the commit API to change the transfer
size and logical block size dependent values.
This relies on the assumption that no I/O can be pending before the
devices moves into the ready state and doesn't need extra freezing
for changes to the queue limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the code in setup_blk_queue is shared between all disciplines.
Move it to common code and leave a method to query the maximum number
of transferable blocks, and a flag to indicate discard support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reflow dasd_state_basic_to_ready a bit to make it easier to modify.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
-----BEGIN PGP SIGNATURE-----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=RG5H
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix invalid -EBUSY on ccw_device_start
s390: use the correct count for __iowrite64_copy()
s390/configs: update default configurations
s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
s390/configs: provide compat topic configuration target
In preparation for checking whether the architecture has data cache
aliasing within alloc_dax(), modify the error handling of dcssblk
dcssblk_add_store() to handle alloc_dax() -EOPNOTSUPP failures.
Considering that s390 is not a data cache aliasing architecture,
and considering that DCSSBLK selects DAX, a return value of -EOPNOTSUPP
from alloc_dax() should make dcssblk_add_store() fail.
Link: https://lkml.kernel.org/r/20240215144633.96437-6-mathieu.desnoyers@efficios.com
Fixes: d92576f1167c ("dax: does not work correctly with virtual aliasing caches")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390.
MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Implementation considerations:
* When MHP_MEMMAP_ON_MEMORY is disabled, the system retains the old
behavior. This means the memory map is allocated from default memory.
* If MACHINE_HAS_EDAT1 is unavailable, MHP_MEMMAP_ON_MEMORY is
automatically disabled. This ensures that vmemmap pagetables do not
consume additional memory from the default memory allocator.
* The MEM_GOING_ONLINE notifier has been modified to perform no
operation, as MEM_PREPARE_ONLINE already executes the sclp assign
command.
* The MEM_CANCEL_ONLINE/MEM_OFFLINE notifier now performs no operation, as
MEM_FINISH_OFFLINE already executes the sclp unassign command.
Link: https://lkml.kernel.org/r/20240108132747.3238763-5-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ap_bus is using inline functions of the ultravisor (uv) in-kernel
API. The related header file is implicitly included via several other
headers. Replace this by an explicit include of the ultravisor header
in the ap_bus file.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Pass the few limits scm_block imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the queue limits directly to blk_alloc_disk instead of setting them
one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also change blk_alloc_disk to return an ERR_PTR instead of just NULL
which can't distinguish errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch introduces dynamic debug hexdump invocation
possibilities to be able to:
- dump an CCA or EP11 CPRB request as early as possible
when received via ioctl from userspace but after the
ap message has been collected together.
- dump an CCA or EP11 CPRB reply short before it is
transferred via ioctl into userspace.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces two dynamic debug hexdump
invocation possibilities to be able to a) dump an
AP message immediately before it goes into the
firmware queue and b) dump a fresh from the
firmware queue received AP message.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch replaces all the s390 debug feature calls with
debug level by dynamic debug calls pr_debug. These calls
are much more flexible and each single invocation can get
enabled/disabled at runtime wheres the s390 debug feature
debug calls have only one knob - enable or disable all in
one bunch.
This patch follows a similar change for the AP bus and
zcrypt device driver code. All this code uses dynamic
debugging with pr_debug and friends for emitting debug
traces now.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cleanup and harmonize the s390 debug feature calls
and defines for the pkey module to be similar to
the debug feature as it is used in the zcrypt device
driver and AP bus.
More or less only renaming but no functional changes.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch replaces all the s390 debug feature calls with
debug level by dynamic debug calls pr_debug. These calls
are much more flexible and each single invocation can get
enabled/disabled at runtime wheres the s390 debug feature
debug calls have only one knob - enable or disable all in
one bunch. The benefit is especially significant with
high frequency called functions like the AP bus scan. In
most debugging scenarios you don't want and need them, but
sometimes it is crucial to know exactly when and how long
the AP bus scan took.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch harmonizes the calls and defines around the
s390 debug feature as it is used in the AP bus and
zcrypt device driver code.
More or less cleanup and renaming, no functional changes.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the switch_to() implementation to process.c and use the generic
switch_to.h header file instead, like some other architectures.
This addresses also the oddity that the old switch_to() implementation
assigns the return value of __switch_to() to 'prev' instead of 'last',
like it should.
Remove also all includes of switch_to.h from C files, except process.c.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Once the discipline is associated with the device, deleting the device
takes care of decrementing the module's refcount. Doing it manually on
this error path causes refcount to artificially decrease on each error
while it should just stay the same.
Fixes: c020d722b110 ("s390/dasd: fix panic during offline processing")
Signed-off-by: Miroslav Franc <mfranc@suse.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240209124522.3697827-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some ERP errors still share the same message format and only add
different reason codes to it. These reason codes don't have any meaning
anymore.
Make the individual error messages more explicit and remove the reason
codes altogether. Comments around the error messages are also removed as
they provide no additional value anymore with more explicit messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240209124522.3697827-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core can properly handle constant struct bus_type,
move the matrix_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-6-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the ap_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-5-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the scm_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-4-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the ccw_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-3-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the css_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-2-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the ccwgroup_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-s390-v1-1-ac891afc7282@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The measurement block origin address is an absolute address; therefore
add a missing virt_to_phys() translation to the cmf_activate() inline
assembly.
This doesn't fix a bug, since virtual and physical addresses are
currently identical.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The address of the measurement block can be anywhere in 64 bit
absolute space. See description of the schm instruction in the
Principles of Operation.
Therefore remove the GFP_DMA flag when allocating the block.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove GFP_DMA flag when allocating memory to be used for CHSC control
blocks. The CHSC instruction can access memory beyond the DMA zone.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add missing virt_to_phys() / phys_to_virt() translation to
alloc_chan_prog() and free_chan_prog().
This doesn't fix a bug since virtual and physical addresses
are currently the same.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
All log messages in dasd.c use the printk variants of pr_*(). They all
add the name of the affected device manually to the log message.
This can be simplified by using the dev_*() variants of printk, which
include the device information and make a separate call to dev_name()
unnecessary.
The KMSG_COMPONENT and the pr_fmt() definition can be dropped. Note that
this removes the "dasd: " prefix from the one pr_info() call in
dasd_init(). However, the log message already provides all relevant
information.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-10-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
PRINTK_HEADER was mainly used to prefix log messages with the module
name. Most components don't use this definition anymore. Either because
there are no log messages being generated anymore, or pr_*() were
replaced by dev_*(), which contains device and component information
already.
PRINTK_HEADER is also dropped in the function
dasd_3990_erp_handle_match_erp() in dasd_3990_erp.c from a panic() call
as panic() already provides all relevant information.
KMSG_COMPONENT was mainly used to identify a component in a long gone
kernel message catalog feature.
Remove both definition since they're either not used or alternatives
make the code slightly shorter and more readable.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-9-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Printing pointer in error messages doesn't add any value since the
addresses are hashed. Remove the %p format specifier and adapt the error
messages slightly.
Replace %p with %px in ERP to get the actual addresses since ERP is used
for debugging purposes only anyway.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To reduce the information required for the string generation in the
sense dump functions, use the more concise dev_err() variant over
printk(KERN_ERR, ...) to improve code readability.
The dev_err() function provides the component and device name for free
and the separate dev_name() calls as well as the PRINTK_HEADER can be
dropped.
Dropping PRINTK_HEADER removes the "dasd(eckd):" for all lines. Only the
first line of a dev_err() call is prefixed with the component and device
(e.g. "dasd-eckd 0.0.95d0:").
The format specifier for printed pointers is also changed to unhashed
(%px) as this can help with debugging and servicing.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-7-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The macros DEV_MESSAGE, MESSAGE, DEV_MESSAGE_LOG, and MESSAGE_LOG, are
not used and there is no history anymore of any usage. Remove them.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All error messages for a failling dasd_smalloc_request() call are logged
via DBF, except one. There is no value in logging this particular
allocation failure via dev_err(). Move the message to DBF, too, to be
in line with the rest.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In quite a few cases an errorstring is generated using snprintf() before
it's passed to dev_err(). This indirection is unnecessary and all
information can simply be passed directly to dev_err() instead.
The errrorstring and ERRORLENGTH definitions are removed entirely.
While at it, rephrase the error messages to provide more context where
possible. Also, fix a few incorrectly used format specifier (e.g. %x02
-> %02x) in those messages.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sysfs_emit() should be used in show() functions. There are still a
couple of functions that use sprintf().
Replace outstanding occurrences of sprintf() in all show() functions
with sysfs_emit().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two variants of the device uid string. One containing the
virtual device unit information table (vduit) identifying the device as
a virtual device located on a real device in a z/VM environment. The
other variant does not contain those additional information.
Simplify the string generation with a shorter check of an existing vduit
embedded in the snprintf() calls.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.
Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.
3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.
Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where
normal PCI stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code
(which perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZalUTxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OZlAQDq7gZEL/ZSh1X4IQa4qPbdGeko
ArZvcOi3SiVW3jw3FgD8CfPauKux1tliSpeRybcRkUVQoPGvoWc8kwAkCm/Juwc=
=+Xd9
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where normal PCI
stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code (which
perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
* tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: do not reset queue removed from host config
s390/vfio-ap: reset queues associated with adapter for queue unbound from driver
s390/vfio-ap: reset queues filtered from the guest's AP config
s390/vfio-ap: let on_scan_complete() callback filter matrix and update guest's APCB
s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration
s390/vfio-ap: always filter entire AP matrix
s390/net: add Thorsten Winkler as maintainer
s390/pai_ext: split function paiext_push_sample
s390/pai_ext: rework function paiext_copy argments
s390/pai: rework paiXXX_start and paiXXX_stop functions
s390/pai_crypto: split function paicrypt_push_sample
s390/pai: rework paixxxx_getctr interface
s390/ptrace: remove leftover comment
s390/fpu: remove __load_fpu_regs() export
s390/mm,fault: remove not needed tsk variable
s390/pci: fix max size calculation in zpci_memcpy_toio()
s390/kexec: do not automatically select KEXEC option
s390/compat: change default for CONFIG_COMPAT to "n"
Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty core
and drivers in here, along with the usual set of rs485 updates (someday
this might work properly...) Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm
vSI69HmdKKwo69YLOSBp
=14n1
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
When a queue is unbound from the vfio_ap device driver, it is reset to
ensure its crypto data is not leaked when it is bound to another device
driver. If the queue is unbound due to the fact that the adapter or domain
was removed from the host's AP configuration, then attempting to reset it
will fail with response code 01 (APID not valid) getting returned from the
reset command. Let's ensure that the queue is assigned to the host's
configuration before resetting it.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-7-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
