IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds max1117/max1118/max1119 8-bit, dual-channel ADC driver.
This new driver uses the zero length spi_transfers with the cs_change
flag set and/or the non-zero delay_usecs.
1. The zero length transfer with the spi_transfer.cs_change set is
required in order to select CH1. The chip select line must be brought
high and low again without transfer.
2. The zero length transfer with the spi_transfer.delay_usecs > 0 is
required for waiting the conversion to be complete. The conversion
begins with the falling edge of the chip select. During the conversion
process, SCLK is ignored.
These two usages are unusual. But the spi controller drivers that use
a default implementation of transfer_one_message() are likely to work.
(I've tested this adc driver with spi-omap2-mcspi and spi-xilinx)
On the other hand, some spi controller drivers that have their own
transfer_one_message() may not work. But at least for the zero length
transfer with delay_usecs > 0, I'm proposing a new testcase for the
spi-loopback-test that can test whether the delay_usecs setting has
taken effect.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In order to accommodate in a logical manner for the premuxed channels
in PM8921 and the similarly addressed channels in later PMICs, we
need a twocell arrangement with premux and analog mux setting as
a tuple to uniquely identify a hardware channel.
These bindings are not yet in use, so it should be fine to augment
them before we actually start using it in drivers and device trees.
This scheme came out of lengthy discussions and reverse-engineering
and reading of the few information sources we have.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add device tree bindings documentation for Maxim max9611/max9612 current
sense amplifier.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Somewhat dominated in patch numbers of last of the outreachy application
window related patches (they are still coming, despite window being closed
which is good to see!)
Good set of new drivers as well.
New device support
* ASPEED ADC
- new driver
* cpcap PMIC ADC
- new driver
* hid-humidity
- driver for HID compatible humidity sensors.
* ltc2497 ADC
- new driver
* mpu6050
- bring bindings up to date and add trivial support for 9250
* rockchip-saradc
- update bindings to cover rk3328
* vl6180 light, proximity and time of flight sensor.
- new driver
Features
* meson-saradc
- add calibration
Cleanup and minor fixes
* ad5504
- constify attribute_group structure
- drop casting of void *
* ad7150
- replace some shifts of 1 by BIT macro usage
* ad7152
- blank lines between function definitions
* ad7280a
- octal permissions.
* ad7606
- replace use of core mlock mutex with a local lock
* ad7746
- replace some shifts of 1 by BIT macro usage
- function parameter alignment
- drop some excessive brackets (introduced in last pull request)
* ad7753
- white space cleanup
* ad7754
- includes in alphabetical order and groupped appropriately.
- change from missuse of internal mlock mutex to using the buffer lock to
also protect values during frequency update.
* ad779x
- constify attribute_group structures
* ad9832
- octal permissions
* adis16060
- remove use of core mlock mutex in favour of adding a local
_spi_write_then_read which can use the local buffer protection lock.
- fix naming of above function.
* adis16203
- remove locking during reads of calibbias that doesn't protect anything
not protected elsewhere.
* adis16209
- remove unnecessary braces in single statement if
* adis16240
- remove unnecessary braces in single statement if
* adt7136
- drop excess blank lines and put some in between functions.
* ams-iaq
- replace comma with semi colon. Not actual bug, just unusual syntax.
* apds9960
- constify attribute group structure
* as3935
- constify attribute group structure
* bm1750
- constify attribute group structure
* cros_ec
- devm version of triggered buffer setup to simplify code.
* exynos
- drop casting of void *
* hdc100x
- constify attribute_group structure
* hid-accel
- fix wrong scale for newly introduced gravity sensor.
* hts221
- drop casting of void *
* hx711
- constify attribute_group structure
* imx7d_adc
- drop casting of void *
* lm35333
- constify attribute_group structure
* lsm6dsx
- drop casting of void *
- hold ODR configuration until enabling to avoid a race condition.
* max1027
- drop casting of void *
* max11100
- fix a comma where semicolon was intended (no actual bug, just odd)
* max1363
- constify attribute_group structure
* ms sensors
- drop casting of void *
* rockchip_saradc
- drop casting of void *
* sun4i-gpadc
- fix missing dependency on THERMAL or presence of stubs (issue only
introduced in pervious set)
- drop casting of void *
* tsl2x7x
- fix wrong standard deviation calc. Note these aren't actually used for
anything at the moment so bug didn't really matter.
- constify attribute group structure.
* vf610adc
- drop casting of void *
* vz89x
- replace comma with semicolon. Not actual bug, just odd syntax.
* zpa2326
- drop casting of void *
-----BEGIN PGP SIGNATURE-----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=YYdq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Third set of new device support, cleanups and features for IIO in the 4.12 cycle
Somewhat dominated in patch numbers of last of the outreachy application
window related patches (they are still coming, despite window being closed
which is good to see!)
Good set of new drivers as well.
New device support
* ASPEED ADC
- new driver
* cpcap PMIC ADC
- new driver
* hid-humidity
- driver for HID compatible humidity sensors.
* ltc2497 ADC
- new driver
* mpu6050
- bring bindings up to date and add trivial support for 9250
* rockchip-saradc
- update bindings to cover rk3328
* vl6180 light, proximity and time of flight sensor.
- new driver
Features
* meson-saradc
- add calibration
Cleanup and minor fixes
* ad5504
- constify attribute_group structure
- drop casting of void *
* ad7150
- replace some shifts of 1 by BIT macro usage
* ad7152
- blank lines between function definitions
* ad7280a
- octal permissions.
* ad7606
- replace use of core mlock mutex with a local lock
* ad7746
- replace some shifts of 1 by BIT macro usage
- function parameter alignment
- drop some excessive brackets (introduced in last pull request)
* ad7753
- white space cleanup
* ad7754
- includes in alphabetical order and groupped appropriately.
- change from missuse of internal mlock mutex to using the buffer lock to
also protect values during frequency update.
* ad779x
- constify attribute_group structures
* ad9832
- octal permissions
* adis16060
- remove use of core mlock mutex in favour of adding a local
_spi_write_then_read which can use the local buffer protection lock.
- fix naming of above function.
* adis16203
- remove locking during reads of calibbias that doesn't protect anything
not protected elsewhere.
* adis16209
- remove unnecessary braces in single statement if
* adis16240
- remove unnecessary braces in single statement if
* adt7136
- drop excess blank lines and put some in between functions.
* ams-iaq
- replace comma with semi colon. Not actual bug, just unusual syntax.
* apds9960
- constify attribute group structure
* as3935
- constify attribute group structure
* bm1750
- constify attribute group structure
* cros_ec
- devm version of triggered buffer setup to simplify code.
* exynos
- drop casting of void *
* hdc100x
- constify attribute_group structure
* hid-accel
- fix wrong scale for newly introduced gravity sensor.
* hts221
- drop casting of void *
* hx711
- constify attribute_group structure
* imx7d_adc
- drop casting of void *
* lm35333
- constify attribute_group structure
* lsm6dsx
- drop casting of void *
- hold ODR configuration until enabling to avoid a race condition.
* max1027
- drop casting of void *
* max11100
- fix a comma where semicolon was intended (no actual bug, just odd)
* max1363
- constify attribute_group structure
* ms sensors
- drop casting of void *
* rockchip_saradc
- drop casting of void *
* sun4i-gpadc
- fix missing dependency on THERMAL or presence of stubs (issue only
introduced in pervious set)
- drop casting of void *
* tsl2x7x
- fix wrong standard deviation calc. Note these aren't actually used for
anything at the moment so bug didn't really matter.
- constify attribute group structure.
* vf610adc
- drop casting of void *
* vz89x
- replace comma with semicolon. Not actual bug, just odd syntax.
* zpa2326
- drop casting of void *
This patch adds support for the Analog Devices / Linear Technology
LTC2497 ADCs. The LTC2497 is a 16-channel (eight differential),
16-bit, high precision, delta-sigma ADC with an automatic, differential,
input current cancellation front end and a 2-wire, I2C interface.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mpu9250 is a SIP containing an mpu6500 and an ak8975. If this was all
there was too it there would be no need for explicit handling in the driver.
Arguably the bindings would also only reflect the presence of an mpu6500 with
the ak8975 hanging off it, as the kernel doesn't care that they are in one
package.
However, the WHOAMI value changes as well so best to add explicit support.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These bindings are somewhat lagging the state of the driver. The i2c-gate
bindings are documented elsewhere, but it seems sensible to at least have
an example and cross reference in here. SPI bindings will need to be the
subject of a future patch.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
The rk3328 saradc is the same as rk3399.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Rick Altherr <raltherr@google.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
has ADCs that are used for battery charging and USB PHY VBUS and ID pin
detection.
Unfortunately the only documentation for this ADC seems to be the
Motorola mapphone Linux kernel tree. I have tested that reading raw and
scaled values works, but I have not used the timed sampling that the ADC
seems to support.
Let's add a minimal support for it so we can eventually provide IIO
channels for the related battery charging and USB PHY drivers.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Here are a number of small USB and PHY driver fixes for 4.11-rc4.
Nothing major here, just an bunch of small fixes, and a handfull of good
fixes from Johan for devices with crazy descriptors. There are a few
new device ids in here as well.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNefwQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykewwCg1P1HEZV2wLJSalsPxduIKIRLcmkAnRcE0H31
2egrp1seSGQumYcGQUJ/
=2fH+
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.11-rc4.
Nothing major here, just an bunch of small fixes, and a handfull of
good fixes from Johan for devices with crazy descriptors. There are a
few new device ids in here as well.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
usb: gadget: udc: remove pointer dereference after free
usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb: gadget: acm: fix endianness in notifications
usb: dwc3: gadget: delay unmap of bounced requests
USB: serial: qcserial: add Dell DW5811e
usb: hub: Fix crash after failure to read BOS descriptor
ACM gadget: fix endianness in notifications
USB: usbtmc: fix probe error path
USB: usbtmc: add missing endpoint sanity check
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
usb: musb: fix possible spinlock deadlock
usb: musb: dsps: fix iounmap in error and exit paths
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
USB: uss720: fix NULL-deref at probe
...
one where we need to copy a string because we can't guarantee it isn't
freed sometime later.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=8q6a
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of Sunxi and Rockchip clk driver fixes and a core framework
one where we need to copy a string because we can't guarantee it isn't
freed sometime later"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: fix recalc_rate formula of NKMP clocks
clk: sunxi-ng: Fix div/mult settings for osc12M on A64
clk: rockchip: Make uartpll a child of the gpll on rk3036
clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036
clk: core: Copy connection id
dt-bindings: arm: update Armada CP110 system controller binding
clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock
clk: sunxi: ccu-sun5i needs nkmp
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
This patch adds support for STMicro VL6180 - ALS, range and proximity sensor. Sensor is capable of measuring the light
intensity as well as object distance using TOF (Time of Flight) technology.
Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com>
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
- Fix initialization of HS400-ES eMMC cards
- A couple of fixes for the mmc block device driver
- Resolved a compiler warning
MMC host:
- sdhci: Do not disable IRQs while waiting for clock
- sdhci-pci: Do not disable IRQs in sdhci_intel_set_power
- sdhci-of-arasan: Fix incorrect timeout clock
- mediatek: Fix bug for setting wrong clock frequency
- sdhci-of-at91: Use regulator to fix cmd timeout errors
- ushc: Fix NULL-deref at probe
- rockchip-dw-mshc: Rename RK1108 to RV1108 in DT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AB+h
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.11 rc4.
MMC core:
- Fix initialization of HS400-ES eMMC cards
- A couple of fixes for the mmc block device driver
- Resolved a compiler warning
MMC host:
- sdhci: Do not disable IRQs while waiting for clock
- sdhci-pci: Do not disable IRQs in sdhci_intel_set_power
- sdhci-of-arasan: Fix incorrect timeout clock
- mediatek: Fix bug for setting wrong clock frequency
- sdhci-of-at91: Use regulator to fix cmd timeout errors
- ushc: Fix NULL-deref at probe
- rockchip-dw-mshc: Rename RK1108 to RV1108 in DT"
* tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_power
mmc: sdhci: Do not disable interrupts while waiting for clock
mmc: ushc: fix NULL-deref at probe
mmc: sdhci-of-at91: Support external regulators
mmc: core: mmc_blk_rw_cmd_err - remove unused variable
mmc: mediatek: Fixed bug where clock frequency could be set wrong
mmc: block: Fix cmd error reset failure path
mmc: block: Fix is_waiting_last_req set incorrectly
mmc: core: Fix access to HS400-ES devices
mmc: sdhci-of-arasan: fix incorrect timeout clock
dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108
Just several fixups,
- fix page fault and vblank timeout issues due to delayed vblank handling.
- fix panel driver probing to fail without te-gpios property.
- fix potential security hole by using "%pK" format.
- fix wrong if statement condition.
And one cleanup which removes Exynos4415 SoC support which is not supported
anymore.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos/dsi: make te-gpios optional
drm/exynos: Print kernel pointers in a restricted form
drm/exynos/decon5433: fix software trigger mask
drm/exynos/fimd: signal frame done interrupt at front porch
drm/exynos/decon5433: signal frame done interrupt at front porch
drm/exynos/decon5433: fix vblank event handling
drm/exynos: move crtc event handling to drivers callbacks
drm/exynos: Remove support for Exynos4415 (SoC not supported anymore)
drm/exynos/decon5433: & vs | typo
f_acm got an endianness fix by Oliver Neukum. This has been around for a
long time but it's finally fixed.
f_hid learned that it should never access hidg->req without first
grabbing the spinlock.
Roger Quadros fixed two bugs in the f_uvc function driver.
Janusz Dziedzic fixed a very peculiar bug with EP0, one that's rather
difficult to trigger. When we're dealing with bounced EP0 requests, we
should delay unmap until after ->complete() is called.
UDC class got a use-after-free fix.
-----BEGIN PGP SIGNATURE-----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=BWuW
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.11-rc4
f_acm got an endianness fix by Oliver Neukum. This has been around for a
long time but it's finally fixed.
f_hid learned that it should never access hidg->req without first
grabbing the spinlock.
Roger Quadros fixed two bugs in the f_uvc function driver.
Janusz Dziedzic fixed a very peculiar bug with EP0, one that's rather
difficult to trigger. When we're dealing with bounced EP0 requests, we
should delay unmap until after ->complete() is called.
UDC class got a use-after-free fix.
*) Revert USB3 PHY support for Broadcom NSP SoC
*) Fix compiler error on qcom-usb-hs when depends on EXTCON
is not added
*) Fix error handling in phy-exynos-pcie
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=AZDi
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.11-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.11-rc
*) Revert USB3 PHY support for Broadcom NSP SoC
*) Fix compiler error on qcom-usb-hs when depends on EXTCON
is not added
*) Fix error handling in phy-exynos-pcie
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add support for Linear Technology LTC2632 (SPI) family of·
dual 12- 10-, and 8-bits output DACs.
Signed-off-by: Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Support for Exynos4415 is going away because there are no internal nor
external users.
Since commit 46dcf0ff0de3 ("ARM: dts: exynos: Remove exynos4415.dtsi"),
the platform cannot be instantiated so remove also the drivers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kukjin Kim <kgene@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull networking fixes from David Miller:
1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
from Steffen Klassert.
2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
Alexei Starovoitov.
3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
Michal Schmidt.
4) We can get a divide by zero when TCP socket are morphed into
listening state, fix from Eric Dumazet.
5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
skb_complete_tx_timestamp(). From Eric Dumazet.
6) Use after free in dccp_feat_activate_values(), also from Eric
Dumazet.
7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
Jarod Wilson.
8) Fix use after free in vrf_xmit(), from David Ahern.
9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
Alexey Kodanev.
10) Properly check napi_complete_done() return value in order to decide
whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
Lendacky.
11) Fix double free of hwmon device in marvell phy driver, from Andrew
Lunn.
12) Don't crash on malformed netlink attributes in act_connmark, from
Etienne Noss.
13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
from Sabrina Dubroca.
14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
Florian Westphal.
15) Fix routing redirect races in dccp and tcp, basically the ICMP
handler can't modify the socket's cached route in it's locked by the
user at this moment. From Jon Maxwell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
qed: Enable iSCSI Out-of-Order
qed: Correct out-of-bound access in OOO history
qed: Fix interrupt flags on Rx LL2
qed: Free previous connections when releasing iSCSI
qed: Fix mapping leak on LL2 rx flow
qed: Prevent creation of too-big u32-chains
qed: Align CIDs according to DORQ requirement
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dccp: fix memory leak during tear-down of unsuccessful connection request
tun: fix premature POLLOUT notification on tun devices
dccp/tcp: fix routing redirect race
ucc/hdlc: fix two little issue
vxlan: fix ovs support
net: use net->count to check whether a netns is alive or not
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
net: wimax/i2400m: fix NULL-deref at probe
isdn/gigaset: fix NULL-deref at probe
...
Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here is a number of different USB fixes for 4.11-rc2. Seems like there
were a lot of unresolved issues that people have been finding for this
subsystem, and a bunch of good security auditing happening as well from
Johan Hovold. There's the usual batch of gadget driver fixes and xhci
issues resolved as well.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWMOkLA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymiCACeIL3h4bNEc6+XLiB+sfmQx4wV2MUAnRMD1gB0
GxkBXY1Iny94vhZC8x5r
=dlkm
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a number of different USB fixes for 4.11-rc2.
Seems like there were a lot of unresolved issues that people have been
finding for this subsystem, and a bunch of good security auditing
happening as well from Johan Hovold. There's the usual batch of gadget
driver fixes and xhci issues resolved as well.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: host: xhci-dbg: HCIVERSION should be a binary number
usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct
usb: xhci-mtk: check hcc_params after adding primary hcd
USB: serial: digi_acceleport: fix OOB-event processing
MAINTAINERS: usb251xb: remove reference inexistent file
doc: dt-bindings: usb251xb: mark reg as required
usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time
usb: usb251xb: remove max_{power,current}_{sp,bp} properties
usb-storage: Add ignore-residue quirk for Initio INIC-3619
USB: iowarrior: fix NULL-deref in write
USB: iowarrior: fix NULL-deref at probe
usb: phy: isp1301: Add OF device ID table
usb: ohci-at91: Do not drop unhandled USB suspend control requests
USB: serial: safe_serial: fix information leak in completion handler
USB: serial: io_ti: fix information leak in completion handler
USB: serial: omninet: drop open callback
USB: serial: omninet: fix reference leaks at open
USB: serial: io_ti: fix NULL-deref in interrupt callback
usb: dwc3: gadget: make to increment req->remaining in all cases
...
Fix typos and add the following to the scripts/spelling.txt:
overide||override
While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.
Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.
Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c8ca631f9480 ("dt-bindings: phy: Add documentation
for NSP USB3 PHY") to match reverting commit adding the new PHY driver.
Please note we revert this commit before it reached stable release.
If new compatible string is needed it should be added to the existing
bcm-ns-usb3-phy.txt which already describes this PHY.
Acked-by: Jon Mason <jon.mason@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Mark the reg property as required and furthermore fix some typos and
spellings in the documentation.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename oc-delay-* to oc-delay-us and make it expect a time value.
Furthermore add -ms suffix to power-on-time. There changes were
suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver
from devicetree. This is done to simplify the dt bindings as requested
by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those
properties are ever needed by somebody they can be enabled again easily.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds documentation for a new "phy-handle" property,
"fixed-link" and "mdio" sub-node. These allows the enumeration
of PHYs which are supported by the phy library under drivers/net/phy.
The EMAC ethernet controller in IBM and AMCC 4xx chips is
currently stuck with a few privately defined phy
implementations. It has no support for PHYs which
are supported by the generic phylib.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that in the CP110 HW block present in Marvell Armada
7K/8K SoCs, gatable clock n°18 not only controls SD/MMC, but also the
GOP block. This commit updates the Device Tree binding for this piece
of hardware accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Quite a bit of outreachy activity here with a driver from a current intern
and a number of cleanup patches as part of the next round.
Getting a pull request in early this cycle as it's looking like another large
cycle for IIO.
New device support
* adxl345
- initial device support. Note, once complete support is done the intent
is to superceded the driver in input/misc.
- bindings.
- conversion from i2c direct calls to regmap and driver split.
- spi support.
* chromeos light and proximity.
- new driver.
* devantech srf04 ultrasonic ranger
- new driver with device tree bindings.
* hid temperature
- new driver for environemntal temperature support from hid devices.
* max30102 oximeter
- new driver with device tree bindings.
* st lsm6dsx
- refactor and addition of device support for lsm6dsl and lsm6ds3h.
Staging graduation
* isl29028 including copyright notice update to reflect Brian's work.
* lpc32xx_adc.
* spear adc. It's not perfect and there are some datasheet disagreements, but
it works and is good enough to graduate.
New features
* documentation
- abi docs for in_proximity_sampling_frequency_available.
- generalise counting direction ABI docs as a second driver is going to
use them.
* hid-sensor-prox
- Add support for HID_USAGE_SENSOR_HUMAN_PRESENCE if used on a particular
device.
* isl29028
- runtime pm.
* meson-saradc
- switch from polling to interrupt mode and improved read_raw_sample function
to avoid unnecessary loop.
* tmp007
- interrupt and threshold event support.
Cleanups and minor fixes
* ad2s1210
- permissions to octal.
* ad7192
- permissions to octal.
- use BIT macro.
* ad9832
- merge header definitions into source file.
* ad9834
- merge header definitions into source file.
* ade7753
- merge header definitions into source file.
- cleanup include ordering.
* ade7854
- simplify return logic.
* adis16201
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16203
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16209
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16240
- permissions to octal.
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adt7136
- permissions to octal.
* cio-dac
- set missing parent device.
* documentation
- update version numbers on sysfs ABI for counter bits that didn't quite.
make 4.9.
* isl29028
- mdelay to msleep.
- incorrrect sleep time when taking first proximity reading.
* lmp91000
- set missing parent device.
* lpc32xx
- Consistent prefixes for defines.
- rename local state structure to _state.
* max30100
- set missing parent device.
* max30102
- set missing parent device.
* maxim-thermocouple
- set missing parent device.
* meter driver header
- permissions to octal.
* pulsedlight-lidar-lite-v2
- set missing parent device.
* quad-8
- set missing parent device.
* st104
- set missing parent device.
Other
* Mailmap
- update Matt Ranostay's email address to the Konsolko one.
-----BEGIN PGP SIGNATURE-----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=rlqq
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of IIO new device support, features and cleanup for the 4.12 cycle.
Quite a bit of outreachy activity here with a driver from a current intern
and a number of cleanup patches as part of the next round.
Getting a pull request in early this cycle as it's looking like another large
cycle for IIO.
New device support
* adxl345
- initial device support. Note, once complete support is done the intent
is to superceded the driver in input/misc.
- bindings.
- conversion from i2c direct calls to regmap and driver split.
- spi support.
* chromeos light and proximity.
- new driver.
* devantech srf04 ultrasonic ranger
- new driver with device tree bindings.
* hid temperature
- new driver for environemntal temperature support from hid devices.
* max30102 oximeter
- new driver with device tree bindings.
* st lsm6dsx
- refactor and addition of device support for lsm6dsl and lsm6ds3h.
Staging graduation
* isl29028 including copyright notice update to reflect Brian's work.
* lpc32xx_adc.
* spear adc. It's not perfect and there are some datasheet disagreements, but
it works and is good enough to graduate.
New features
* documentation
- abi docs for in_proximity_sampling_frequency_available.
- generalise counting direction ABI docs as a second driver is going to
use them.
* hid-sensor-prox
- Add support for HID_USAGE_SENSOR_HUMAN_PRESENCE if used on a particular
device.
* isl29028
- runtime pm.
* meson-saradc
- switch from polling to interrupt mode and improved read_raw_sample function
to avoid unnecessary loop.
* tmp007
- interrupt and threshold event support.
Cleanups and minor fixes
* ad2s1210
- permissions to octal.
* ad7192
- permissions to octal.
- use BIT macro.
* ad9832
- merge header definitions into source file.
* ad9834
- merge header definitions into source file.
* ade7753
- merge header definitions into source file.
- cleanup include ordering.
* ade7854
- simplify return logic.
* adis16201
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16203
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16209
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adis16240
- permissions to octal.
- merge header definitions into source file.
- rename _core.c to .c as there is nothing else.
* adt7136
- permissions to octal.
* cio-dac
- set missing parent device.
* documentation
- update version numbers on sysfs ABI for counter bits that didn't quite.
make 4.9.
* isl29028
- mdelay to msleep.
- incorrrect sleep time when taking first proximity reading.
* lmp91000
- set missing parent device.
* lpc32xx
- Consistent prefixes for defines.
- rename local state structure to _state.
* max30100
- set missing parent device.
* max30102
- set missing parent device.
* maxim-thermocouple
- set missing parent device.
* meter driver header
- permissions to octal.
* pulsedlight-lidar-lite-v2
- set missing parent device.
* quad-8
- set missing parent device.
* st104
- set missing parent device.
Other
* Mailmap
- update Matt Ranostay's email address to the Konsolko one.
Add the device tree binding documentation for the ADXL345 3-axis digital
accelerometer.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These updates have been kept in a separate branch mostly because
they rely on updates to the respective clk drivers to keep the
shared header files in sync.
This includes two branches for arm64 dt updates, both following up
on earlier changes for the same platforms that are already merged:
Samsung:
- add USB3 support in Exynos7
- minor PM related updates
Amlogic:
- new machines: WeTek Set-top-boxes
- various devices added to DT
There are also a couple of bugfixes that trickled in since the
start of the merge window:
- The moxart_defconfig was not building the intended platform
- CPU-hotplug was broken on ux500
- Coresight was broken on Juno (never worked)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=A3U6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
rely on updates to the respective clk drivers to keep the shared
header files in sync.
This includes two branches for arm64 dt updates, both following up on
earlier changes for the same platforms that are already merged:
Samsung:
- add USB3 support in Exynos7
- minor PM related updates
Amlogic:
- new machines: WeTek Set-top-boxes
- various devices added to DT
There are also a couple of bugfixes that trickled in since the start
of the merge window:
- The moxart_defconfig was not building the intended platform
- CPU-hotplug was broken on ux500
- Coresight was broken on Juno (never worked)"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
ARM: deconfig: fix the moxart defconfig
ARM: ux500: resume the second core properly
arm64: dts: juno: update definition for programmable replicator
arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
ARM64: dts: meson-gxbb-p200: add ADC laddered keys
ARM64: dts: meson: meson-gx: add the SAR ADC
ARM64: dts: meson-gxl: add the pwm_ao_b pin
ARM64: dts: meson-gx: add the missing pwm_AO_ab node
clk: gxbb: fix CLKID_ETH defined twice
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
clk: gxbb: add the SAR ADC clocks and expose them
dt-bindings: amlogic: Add WeTek boards
ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
dt-bindings: vendor-prefix: Add wetek vendor prefix
ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
...
- Fix for a cpuidle menu governor problem that started to take an
unnecessary spinlock after one of the recent updates and that
did not play well with the RT patch (Rafael Wysocki).
- Fix for the new intel_pstate operation mode switching feature
added recently that did not reinitialize P-state limits properly
when switching operation modes (Rafael Wysocki).
- Removal of unused global notifiers from the PM QoS framework
(Viresh Kumar).
- Generic power domains framework update to make it handle
asynchronous invocations of PM callbacks in the "noirq" phases
of system suspend/hibernation correctly (Ulf Hansson).
- Two hibernation core cleanups (Rafael Wysocki).
- intel_idle cleanup related to the sysfs interface (Len Brown).
- Off-by-one bug fix in the OPP (Operating Performance Points)
framework (Andrzej Hajda).
- OPP framework's documentation fix (Viresh Kumar).
- cpufreq qoriq driver cleanup (Tang Yuantian).
- Fixes for typos in comments in the device runtime PM framework
(Christophe Jaillet).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=SeUF
-----END PGP SIGNATURE-----
Merge tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates deom Rafael Wysocki:
"These fix two bugs introduced by recent power management updates (in
the cpuidle menu governor and intel_pstate) and a few other issues,
clean up things and remove unused code.
Specifics:
- Fix for a cpuidle menu governor problem that started to take an
unnecessary spinlock after one of the recent updates and that did
not play well with the RT patch (Rafael Wysocki).
- Fix for the new intel_pstate operation mode switching feature added
recently that did not reinitialize P-state limits properly when
switching operation modes (Rafael Wysocki).
- Removal of unused global notifiers from the PM QoS framework
(Viresh Kumar).
- Generic power domains framework update to make it handle
asynchronous invocations of PM callbacks in the "noirq" phases of
system suspend/hibernation correctly (Ulf Hansson).
- Two hibernation core cleanups (Rafael Wysocki).
- intel_idle cleanup related to the sysfs interface (Len Brown).
- Off-by-one bug fix in the OPP (Operating Performance Points)
framework (Andrzej Hajda).
- OPP framework's documentation fix (Viresh Kumar).
- cpufreq qoriq driver cleanup (Tang Yuantian).
- Fixes for typos in comments in the device runtime PM framework
(Christophe Jaillet)"
* tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / OPP: Documentation: Fix opp-microvolt in examples
intel_idle: stop exposing platform acronyms in sysfs
cpufreq: intel_pstate: Fix limits issue with operation mode switching
PM / hibernate: Define pr_fmt() and use pr_*() instead of printk()
PM / hibernate: Untangle power_down()
cpuidle: menu: Avoid taking spinlock for accessing QoS values
PM / QoS: Remove global notifiers
PM / runtime: Fix some typos
cpufreq: qoriq: clean up unused code
PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
PM / Domains: Power off masters immediately in the power off sequence
PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
PM / Domains: Move genpd_power_off() above genpd_power_on()
The triplet present in "opp-microvolt" property should be in the order
<target min max>, while all the examples have it in the order
<min target max>.
Fix it.
Luckily all of the users of "opp-microvolt" property have applied brain
instead of copying the examples from documentation and none of the
actual dts files have it wrong.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal management updates from Zhang Rui:
- add thermal driver for R-Car Gen3 thermal sensors.
- add thermal driver for ZTE' zx2967 family thermal sensors.
- convert thermal ID allocation from IDR to IDA.
- fix a possible NULL dereference in imx thermal driver.
- fix a ti-soc-thermal driver dependency issue so that critical thermal
control is still available when CPU_THERMAL is not defined.
- update binding information for QorIQ thermal driver.
- a couple of cleanups in thermal core, intel_powerclamp, exynos,
dra752-thermal, mtk-thermal driver.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
dt-bindings: Update QorIQ TMU thermal bindings
thermal: mtk_thermal: Staticise a number of data variables
thermal: arm: dra752: Remove all TSHUT related definitions
thermal: arm: dra752: Remove TSHUT configuration
thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
thermal: imx: Fix possible NULL dereference.
thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
thermal: zx2967: add thermal driver for ZTE's zx2967 family
thermal: use cpumask_var_t for on-stack cpu masks
dt: bindings: add documentation for zx2967 family thermal sensor
thermal/intel_powerclamp: Remove set-but-not-used variables
thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
thermal: rcar_gen3_thermal: Document the R-Car Gen3
thermal: convert devfreq_cooling to use an IDA
thermal: convert cpu_cooling to use an IDA
thermal: convert clock cooling to use an IDA
thermal core: convert ID allocation to IDA
This set contains mostly fixes to existing drivers as well as cleanup of
code that's not been in active use for a while.
-----BEGIN PGP SIGNATURE-----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=J9q4
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set contains mostly fixes to existing drivers as well as cleanup
of code that's not been in active use for a while"
* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
acpi: lpss: call pwm_add_table() for BSW PWM device
pwm: Try to load modules during pwm_get()
pwm: Don't hold pwm_lookup_lock longer than necessary
pwm: Make the PWM_POLARITY flag in DTB optional
pwm: Print error messages with pr_err() instead of pr_debug()
pwm: imx: Add polarity inversion support to i.MX's PWMv2
pwm: imx: doc: Update imx-pwm.txt documentation entry
pwm: imx: Remove redundant i.MX PWMv2 code
pwm: imx: Provide atomic PWM support for i.MX PWMv2
pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
pwm: imx: Move PWMv2 software reset code to a separate function
pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
pwm: imx: Add separate set of PWM ops for v1 and v2
pwm: imx: Remove ipg clock and enable per clock when required
pwm: lpss: Add Intel Gemini Lake PCI ID
pwm: lpss: Do not export board infos for different PWM types
pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
pwm: lpss: Switch to new atomic API
pwm: lpss: Allow duty cycle to be 0
pwm: lpss: Avoid potential overflow of base_unit
...
Fix typos and add the following to the scripts/spelling.txt:
followings||following
While we are here, add a missing colon in the boilerplate in DT binding
documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.
I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.
Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
swith||switch
swithable||switchable
swithed||switched
swithing||switching
While we are here, fix the "update" to "updates" in the touched hunk in
drivers/net/wireless/marvell/mwifiex/wmm.c.
Link: http://lkml.kernel.org/r/1481573103-11329-2-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
to existing clk drivers. The bulk of the work is on Allwinner and
Rockchip SoCs, but there's also an Intel Atom driver in here too.
New Drivers:
- Tegra BPMP firmware
- Hisilicon hi3660 SoCs
- Rockchip rk3328 SoCs
- Intel Atom PMC
- STM32F746
- IDT VersaClock 5P49V5923 and 5P49V5933
- Marvell mv98dx3236 SoCs
- Allwinner V3s SoCs
Removed Drivers:
- Samsung Exynos4415 SoCs
Updates:
- Migrate ABx500 to OF
- Qualcomm IPQ4019 CPU clks and general PLL support
- Qualcomm MSM8974 RPM
- Rockchip non-critical fixes and clk id additions
- Samsung Exynos4412 CPUs
- Socionext UniPhier NAND and eMMC support
- ZTE zx296718 i2s and other audio clks
- Renesas CAN and MSIOF clks for R-Car M3-W
- Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
- TI CDCE913, CDCE937, and CDCE949 clk generators
- Marvell Armada ap806 CPU frequencies
- STM32F4* I2S/SAI support
- Broadcom BCM2835 DSI support
- Allwinner sun5i and A80 conversion to new style clk bindings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=o8o/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The usual collection of new drivers, non-critical fixes, and updates
to existing clk drivers. The bulk of the work is on Allwinner and
Rockchip SoCs, but there's also an Intel Atom driver in here too.
New Drivers:
- Tegra BPMP firmware
- Hisilicon hi3660 SoCs
- Rockchip rk3328 SoCs
- Intel Atom PMC
- STM32F746
- IDT VersaClock 5P49V5923 and 5P49V5933
- Marvell mv98dx3236 SoCs
- Allwinner V3s SoCs
Removed Drivers:
- Samsung Exynos4415 SoCs
Updates:
- Migrate ABx500 to OF
- Qualcomm IPQ4019 CPU clks and general PLL support
- Qualcomm MSM8974 RPM
- Rockchip non-critical fixes and clk id additions
- Samsung Exynos4412 CPUs
- Socionext UniPhier NAND and eMMC support
- ZTE zx296718 i2s and other audio clks
- Renesas CAN and MSIOF clks for R-Car M3-W
- Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
- TI CDCE913, CDCE937, and CDCE949 clk generators
- Marvell Armada ap806 CPU frequencies
- STM32F4* I2S/SAI support
- Broadcom BCM2835 DSI support
- Allwinner sun5i and A80 conversion to new style clk bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
clk: renesas: mstp: ensure register writes complete
clk: qcom: Do not drop device node twice
clk: mvebu: adjust clock handling for the CP110 system controller
clk: mvebu: Expand mv98dx3236-core-clock support
clk: zte: add i2s clocks for zx296718
clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
clk: tegra: Add BPMP clock driver
clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
clk: uniphier: add NAND clock for all UniPhier SoCs
ARM: dts: sun9i: Switch to new clock bindings
clk: sunxi-ng: Add A80 Display Engine CCU
clk: sunxi-ng: Add A80 USB CCU
clk: sunxi-ng: Add A80 CCU
clk: sunxi-ng: Support separately grouped PLL lock status register
clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
clk: qcom: SDHCI enablement on Nexus 5X / 6P
...
Pull i2c updates from Wolfram Sang:
"I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
support for pca954x muxes, and a bunch of driver bugfixes and
improvements. Nothing really special this cycle.
A few commits have been added to my tree just recently. Those are the
Tegra BPMP driver and a few straightforward bugfixes or cleanups which
I prefer to have upstream rather soonish. The rest had proper
linux-next exposure"
* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
i2c: thunderx: Replace pci_enable_msix()
i2c: exynos5: fix arbitration lost handling
i2c: exynos5: disable fifo-almost-empty irq signal when necessary
i2c: at91: ensure state is restored after suspending
i2c: bcm2835: Avoid possible NULL ptr dereference
i2c: Add Tegra BPMP I2C proxy driver
dt-bindings: Add Tegra186 BPMP I2C binding
misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
i2c: mux: pca954x: Add interrupt controller support
dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
i2c: riic: correctly finish transfers
i2c: i801: Add support for Intel Gemini Lake
i2c: mux: pca9541: Export OF device ID table as module aliases
i2c: mux: pca954x: Export OF device ID table as module aliases
i2c: mux: mlxcpld: remove unused including <linux/version.h>
i2c: busses: constify i2c_algorithm structures
i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
i2c: i2c-cros-ec-tunnel: Reduce logging noise
...
- fix for font color when console is switched to another fb driver
- deferred probing fixes for simplefb driver
- preparations to add support of an optional GPIO to enable panel
for ARM CLCD driver
- some improvements for ssd1307fb driver
- cleanups for OMAP fbdev LCD drivers
- misc fixes/cleanups for various fb drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eASt
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v4.11' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
- fix for font color when console is switched to another fb driver
- deferred probing fixes for simplefb driver
- preparations to add support of an optional GPIO to enable panel for
ARM CLCD driver
- some improvements for ssd1307fb driver
- cleanups for OMAP fbdev LCD drivers
- misc fixes/cleanups for various fb drivers
* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
fbdev: ssd1307fb: include linux/gpio/consumer.h
video: fbdev: fsl-diu-fb: remove impossible condition
video: fbdev: amifb: remove impossible condition
fbdev/ssd1307fb: clear screen in probe
fbdev/ssd1307fb: add support to enable VBAT
fbdev: ssd1307fb: Make reset gpio devicetree property optional
fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
fbdev: ssd1307fb: Start to use gpiod API for reset gpio
video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
video: fbdev: offb: switch to using for_each_node_by_type
video/console: use setup_timer and mod_timer instead of init_timer
fbdev: omap/lcd: Make callbacks optional
fbdev: omap/lcd: Staticize non-exported lcd_panel structs
fbdev: omap/lcd: Remove no-op driver callbacks
video/mbx: use simple_open()
video: fbdev: stifb: handle NULL return value from ioremap_nocache
video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
video: ARM CLCD: use panel device node for getting backlight and mode
...
These are the current source files that should not have
executable attributes set.
[ Normally this would be sent through Andrew Morton's tree
but his quilt tools don't like permission only patches. ]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
