IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
OV5640 will output abnormal image data when work at low resolution
(320x240, 176x144 and 160x120) after switching from high resolution,
such as 1080P, the time interval between high and low switching must
be less than 1000ms in order to OV5640 don't enter suspend state during
the time.
The reason is by 0x3824 value don't restore to initialize value when
do resolution switching. In high resolution setting array, 0x3824 is
set to 0x04, but low resolution setting array remove 0x3824 in commit
db15c1957a2d ("media: ov5640: Remove duplicated mode settings"). So
when do resolution switching from high to low, such as 1080P to 320x240,
and the time interval is less than auto suspend delay time which means
global initialize setting array will not be loaded, the output image
data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table
to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c
to avoid same issue.
Fixes: db15c1957a2d ("media: ov5640: Remove duplicated mode settings")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The HTS value cannot be directly compared to the sensor's output
size. It needs to be converted to an absolute time unit.
Additionally, the hblank value need to be modified as it was
previous invalid.
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove Shawn Tu's and Chiranjeevi Rapolu's e-mail addresses as they are no
longer function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/media/i2c/max9286.c:1707:34: error: ‘max9286_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/i2c/ov7740.c:1203:34: error: ‘ov7740_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/media/i2c/ov2680.c:1149:34: error: ‘ov2680_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/i2c/ov2640.c:1290:34: error: ‘ov2640_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/i2c/mt9m111.c:1370:34: error: ‘mt9m111_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/media/i2c/isl7998x.c:1557:34: error: ‘isl7998x_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Address these compiler warnings by initialising the m_best and p_best
values to 0 and 1 respectively (as latter is used as a divisor):
drivers/media/i2c/tc358746.c: In function 'tc358746_find_pll_settings':
>> drivers/media/i2c/tc358746.c:817:13: warning: 'p_best' is used uninitialized
[-Wuninitialized]
817 | u16 p_best, p;
| ^~~~~~
>> drivers/media/i2c/tc358746.c:816:13: warning: 'm_best' is used uninitialized
[-Wuninitialized]
816 | u16 m_best, mul;
| ^~~~~~
The warnings may well be a false positive but it is difficult for a
compiler to find out whether that truly is the case.
Closes: https://lore.kernel.org/oe-kbuild-all/202305301627.fLT3Bkds-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 80a21da3605 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The tc358746 driver selects CONFIG_GENERIC_PHY_MIPI_DPHY and links to
that, but this fails when CONFIG_GENERIC_PHY is disabled, because Kbuild
then never enters the drivers/phy directory for building object files:
ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk" [drivers/media/i2c/tc358746.ko] undefined!
Add an explicit 'select GENERIC_PHY' here to ensure that the directory
is entered, and add another dependency on that symbol so make it
more obvious what is going on if another driver has the same problem,
as this will produce a Kconfig warning.
Link: https://lore.kernel.org/linux-media/20230623152318.2276816-1-arnd@kernel.org
Fixes: 80a21da360516 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
pm_runtime_get_if_in_use() does not only return nonzero values when
the device is in use, it can return a negative errno too.
And especially during resuming from system suspend, when runtime pm
is not yet up again, -EAGAIN is being returned, so the subsequent
pm_runtime_put() call results in a refcount underflow.
Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When setting formats on the sink pad, propagate the adjusted format over
to the subdev's source pad. Use the MIPID02_SOURCE macro to fetch the
pad's try format rather than relying on the pad field of the format to
facilitate this - the function is specific to the source pad anyway.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
[Sakari Ailus: Line wrap, fix subject]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Format propagation in the st-mipid02 driver is incorrect in that when
setting format for V4L2_SUBDEV_FORMAT_TRY on the source pad, the
_active_ rather than _try_ format from the sink pad is propagated.
This causes problems with format negotiation - update the function to
propagate the correct format.
Fixes: 642bb5e88fed ("media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Statically allocated array of pointers to hwmon_channel_info can be made
const for safety.
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ov5640_update_pixel_rate() function handles the parallel and MIPI
CSI-2 cases separately.
When running on a parallel setup the V4L2_CID_PIXEL_RATE value is
calculated at the beginning of the function using the values configured
with the frame_interval operations, and then the function immediately
returns.
The remaining of the function handles the MIPI CSI-2 configuration and
should not use the 'current_fr' and 'def_fps' fields as those are only
relevant for parallel mode.
Drop a small section of dead code that updates vblank using
frame_interval on a MIPI CSI-2 setup.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The 'current framerate' parameter passed to ov5640_try_fmt_internal() is
unsued. Drop it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When OV5640 work at DVP mode, the default initialization settings
make it output 30 frames per second. But when it work at CSI-2 mode
the default link frequency will make it output 60 frames per second,
so correct the comments to make it more clear.
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Update pixel_rate and link frequency for 1920x1080@30
while changing mode.
Update vblank value while changing mode
Add support to handle multiple link frequencies.
Add dummy ctrl cases for pixel_rate and link frequency
to avoid error while changing the modes dynamically.
Update default link frequency from device tree max link
frequency value.
Update init_cfg() function to update the link frequency
menu_skip_mask value.
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
[Sakari Ailus: Document menu_skip_mask, remove extra blank line.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
dev_err_probe() already display the error code. There is no need to
duplicate it explicitly in the error message.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "& IMX296_TMDOUT_MASK" means that "tmdout" can't be negative so the
error checking will not work.
Fixes: cb33db2b6ccf ("media: i2c: IMX296 camera sensor driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
devm_clk_get() will return either an error or NULL, which the driver
handles, continuing to use the clock of reading the value of the
clock-frequency property.
However, the value of ov5670->xvclk is left as-is and the other clock
framework functions aren't capable of handling error values.
Use devm_clk_get_optional() to obtain NULL instead of -ENOENT.
Fixes: 8004c91e2095 ("media: i2c: ov5670: Use common clock framework")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vs6624 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v4.17. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The sr030pc30 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v2.6.37. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The noon010pc30 camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.16. A device tree file
referencing the device has been added in v3.17, but without
corresponding DT bindings, and with DT support in the driver. The driver
thus hasn't been used since v316. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9t001 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.2. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mt9m032 camera sensor driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.4. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The m5mols camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ad9389b video encoder driver doesn't support DT and relies on
platform data. No board file has ever provided platform data for that
device. The driver has thus never been used in the mainline kernel since
its introduction in v3.7. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Also dev_err_probe message require a trailing \n.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames
compared to older 8-bit identifier used by SMIA. The requested firmware
files used the MIPI manufacturer ID even for SMIA compliant devices,
effectively making the manufacturer ID 0.
While CCS static data is a feature of CCS 1.1, it has no hardware
dependencies. Making this feature available for SMIA devices helps adding
support for them and avoids requesting ill-generated CCS static data file
names. The files are named as:
ccs/smiapp-module-vv-mmmm-rrrr.fw,
ccs/smiapp-sensor-vv-mmmm-rr.fw and
ccs/smia-sensor-vv-mmmm-rr.fw
where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is
the revision number.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some modules don't have any model identification information in the
register address space. The driver as a SMIA++ driver attempted to use
sensor information in this case. This workaround is definitely not for CCS
devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Read 16-bit sensor revision number if the 8-bit register has value 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
No longer mirror flipping controls if the sensor is mounted upside down.
This way the behaviour of the flipping controls and rotation of the sensor
are aligned with the rest of the drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "rotation" fwnode device property is intended to allow specify the
sensor's physical mounting rotation, so that it can be exposed through
the read-only V4L2_CID_CAMERA_SENSOR_ROTATION control and applications
can decide how to compensate for that.
The imx258 driver has read-only VFLIP and HFLIP enabled, resulting in
a 180 degrees image rotation being produced by the sensor. But this
doesn't imply that the physical mounting rotation should match the
driver's implementation.
Now that the driver registers V4L2_CID_CAMERA_SENSOR_ROTATION
and V4L2_CID_HFLIP/VFLIP correctly, userspace has all the required
information to handle the rotation correctly, hence it is not necessary
to require the 'rotation' property to be fixed to 180 degrees in DTS.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Register controls for V4L2_CID_HFLIP and V4L2_CID_VFLIP.
The controls are registered as read-only and enabled by default, as the
driver embeds a 180 degrees rotation in its programming sequences and
only supports that mode of operations.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Adding additional cropped 2592x1444 resolution
for QHD output from Hi556 sensor
Also implement the get_selection pad operation for the Hi556 sensor driver.
The supported targets report the sensor's native size, the crop default
rectangle and the crop rectangle.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ADV7604, ADV7611 and ADV7612 software manuals document the CP_HUE
value differently:
- For ADV7604 and ADV7611, the hue is specified as an unsigned 8-bit
value, and calculated as
(CP_HUE[7:0] * 180) / 256 - 90
with the range set to [-90°, 90°]. Additionally, the values 0x00, 0x0f
and 0xff are documented as corresponding to -90°, 0° and 90°
respectively.
- For ADV7612, the hue is specified as a signed 8-bit value in the range
[0°, 360°[ without any formula. Additionally, the value 0x00 is
documented as corresponding to 0°.
The ADV7604 and ADV7611 documentation is clearly wrong as the example
values don't correspond to the formula. Furthermore, the [-90°, 90°]
range seems incorrect as it would cover only half of the hue space.
The ADV7612 documentation is better, although the range should likely be
[-180°, 180°[ if the value is signed. Given that the values wrap around,
this makes no difference in practice.
The hue values have been verified on ADV7612 to follow the
documentation. There is a high chance they do as well on ADV7604 and
ADV7611.
In any case, all software manuals document the register as 8-bit, so the
current range of the V4L2 hue control [0, 128] is not correct. Expand it
to cover the full 8-bit space, using unsigned values to avoid breaking
any application that may rely on 128 being a valid value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The video adjustments (contrast, brightness, saturation and hue) are
ignored by default by the device when the VID_ADJ_EN bit is clear. The
corresponding V4L2 controls exposed by the drivers have thus no effect.
Fix this by setting the VID_ADJ_EN bit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In some setups XSHUTDOWN is connected to DOVDD when it's unused,
therefore treat the reset gpio as optional.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
hi846_init_controls doesn't clean the allocated ctrl_hdlr
in case there is a failure, which causes memleak. Add
v4l2_ctrl_handler_free to free the resource properly.
Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.
The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.
Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.
Cc: stable@vger.kernel.org
Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use devm_clk_get_optional() instead of hand writing it.
This saves some loC and improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the pattern generator is enabled the device shall not be queried for
timings. Instead the timings programmed shall be reported as they are
the ones being used to generate the pattern.
Before this change an external HDMI source needed to be connected for
the pattern generator to work. The driver would query this external
HDMI source for timings and program the pattern generator using those.
With this change the user can control the timings and have the pattern
generator work without the need of an external HDMI source being
connected.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When initializing the HDMI block during probe an initial set of timings
are selected. These timings are stored in the drivers private data, but
not written to the device.
This in itself is not bad, but in s_dv_timings() the timings stored in
the drivers private data are compared to the new timings, if they match
no action is taken. This creates the corner-case where the timing
selected at initialization is the first timings a user want to use as
the driver then never writes it to the device preventing proper
operation.
Fix this by writing the timings to the device at initialization in
addition to storing them in the drivers private data.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The loop to match the requested timings with the ones supported by the
driver is incorrect. It always iterates thru the whole array of
supported modes. The bounds check after the loop always triggers
resulting in adv748x_hdmi_set_video_timings() always returning -EINVAL.
Fix this by correcting the lookup to break the loop when a match is
found.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
