IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Firstly, remove the FXWC_* defines - the comment on FXWC implies that
the relevant defines are the (A_)EXTOUT_* ones. It's unclear where this
came from - it was in the initial ALSA import, but neither the driver
from Creative nor kX-project have these defines.
Secondly, remove A_HR, which made plain no sense (was unused, and
clashed with FXRT). Amends commit cbb7d8f9b7 ("emu10k1: Update
registers defines for the Audigy 2/emu10k2.5").
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.
While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the Alice2 chips used on 1st generation E-MU cards, the
Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins,
which means that we need to use a smaller mask. Failure to do so would
falsify the read data if the FPGA tried to raise an IRQ right at that
moment. This wasn't a problem so far, as we didn't actually enable FPGA
IRQs, but that's going to change soon.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the register definition clearly states, this is a 16-bit register,
yet we did all accesses as 32-bit. The writes in particular would have
the potential to clear the TIMER register (depending on how the bus/card
actually handles the too long writes).
This commit also introduces a separate define A_GPIO which aliases
A_IOCFG, which better reflects the distinct usage on E-MU cards.
This is done in the same commit to keep the churn down, as we're
touching all involved lines anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Assert the validity of the registers and values, as them being out of
range would indicate an error in the driver. Consequently, don't bother
returning error codes; they were ignored everywhere anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Detach it better from the main PCM driver, which it really doesn't have
much in common with.
In particular, this moves the interrupt handler implementation into
p16v.c, and makes it access the substream runtime status more directly,
so it doesn't need to abuse structs snd_emu10k1_pcm and
snd_emu10k1_voice any more.
We don't need private pcm runtime data at all, as the only thing it was
used for (except the back-link to the substream) was the `running` flag.
So store that directly in runtime->private_data.
This somewhat radical strip-down shows that this driver contains some
complexity that was never actually utilized. I suppose the right way to
fully utilize the hardware in a simple way would be introducing more
substreams. This wouldn't require any of the removed code.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The use of the variable was removed in commit 2b637da5a1 ("clean up
card features"). That commit also broke user space (the ioctl
structure), at which point the defines became meaningless, so I don't
think purging them is a problem.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
extin_mask and extout_mask are used only by the SbLive! microcode, so
they have no effect on Audigy.
Eliminate fxbus_mask entirely, as it wasn't actually used for anything.
As a drive-by, remove the pointless pad1 field from struct
snd_emu10k1_fx8010 - it is not visible to user space, so it has no
binary compatibility constraints.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005509-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the resource management in PCI emu10k1 driver with
devres as a clean up. Each manual resource management is converted
with the corresponding devres helper, the page allocations are done
with the devres helper, and the card object release is managed now via
card->private_free instead of a lowlevel snd_device.
This should give no user-visible functional changes.
Link: https://lore.kernel.org/r/20210715075941.23332-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The emu10k1 fx8010 code allocates each irq resource dynamically and
links to the list at PCM trigger callback. Due to the nature of
trigger callback, the allocation is done with GFP_ATOMIC, hence it
may fail more often. Moreover, the irq resource isn't big at all, and
using the kmalloc for this won't save many bytes, either.
This patch removes the dynamic allocation and embeds the irq resource
into struct snd_emu10k1_fx8010_pcm.irq field instead of keeping a
pointer. As a result, it simplifies the code and removes the
unnecessary GFP_ATOMIC usage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Audigy 2 CA0102 chip (but most likely others from the emu10k1 family,
too) has a problem that from time to time it likes to do few DMA reads a
bit beyond its normal allocation and gets very confused if these reads get
blocked by a IOMMU.
For the first (reserved) page this happens multiple times at every
playback, for various synth pages it happens randomly, rarely for PCM
playback buffers and the page table memory itself.
All these reads seem to follow a similar pattern, observed read offsets
beyond the allocation end were 0x00, 0x40, 0x80 and 0xc0 (PCI cache line
multiples), so it looks like the device tries to accesses up to 256 extra
bytes.
As a workaround let's widen these DMA allocations by an extra page if we
detect that the device is behind a non-passthrough IOMMU (the DMA memory
should be relatively plenty on IOMMU systems).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The emu10k1-family chips need the first page (index 0) reserved in their
page tables for some reason (every emu10k1 driver I've checked does this
without much of an explanation).
Using the first page for normal samples results in a broken playback.
However, we already have a dummy page allocated - so called "silent page"
and, in fact, had always been setting it as the first page in the chip page
table because an initialization of every entry of the page table to point
to a silent page happens after and overwrites the reserved_page allocation.
So the only thing remaining to remove the reserved_page allocation is a
trivial change to the page allocation logic to ignore the first page entry
and start its allocations from the second entry (index 1).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch is a cleanup of EMU1010 dock probing code in emu10k1 driver
to use work instead of kthread in a loop. The work is lighter and
easier to control than kthread, in general.
Instead of a loop with the explicit sleep, we do simply
delayed-schedule the work. At suspend/resume callbacks, the work is
canceled and restarted, respectively.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two
modes for DMA. Second mode is useful for 64 bit os with more then 2 GB
of ram (fixes problems with big soundfont loading)
1) 32MB from 2 GB address space using 8192 pages (used now as default)
2) 16MB from 4 GB address space using 4096 pages
Mode is set using HCFG_EXPANDED_MEM flag in HCFG register.
Also format of emu10k2 page table is then different.
Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk>
Tested-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The various PCM and hwdep allocation functions in this driver take a pointer
to a pointer of a PCM/hwdep where if this parameter is provided the newly
allocated object is stored. All callers pass NULL though, so remove the
parameter.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 83fc3bc095.
sh-specific "CCR" and "CCR2" have been prefixed by "SH_" in commit
a5f6ea29f9 ('sh: prefix sh-specific "CCR" and
"CCR2" by "SH_"').
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [b209c4df: ALSA: emu10k1: cache emu1010 firmware] broke the
firmware loading of the dock, just (mistakenly) ignoring a different
firmware for docks on some models. This patch revives them again.
Bugzilla: https://bugs.archlinux.org/task/34865
Reported-and-tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com>
Cc: <stable@vger.kernel.org> [v3.8+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
CCR is defined in emu10k1, but SuperH is defined too.
If user use this driver with SuperH, it becomes a double definition.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With some hardware combinations, the PCM interrupts are acknowledged
before the period boundary from the emu10k1 chip. The midlevel PCM code
gets confused and the playback stream is interrupted.
It seems that the interrupt processing shift by 2 samples is enough
to fix this issue. This default value does not harm other,
non-affected hardware.
More information: Kernel bugzilla bug#16300
[A copmile warning fixed by tiwai]
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Impact: cleanup
The earlier patch 'make most exported headers use strict integer
types' accidentally includes <linux/types.h> both from the common and
from the kernel-only parts.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This takes care of all files that have only a small number
of non-strict integer type uses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: linux-ppp@vger.kernel.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Audigy2 Platinum, the Analog/Digital mixer switch is inverted.
https://bugzilla.novell.com/show_bug.cgi?id=396204
The patch adds a simple workaround.
There might be another device requiring a similar fix, too (or fix for
audigy2 generically), but right now I fix only the known broken one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch improves E-Mu 1616(M) cardbus support. It adds definitions of the
new Microdock and 1010 cardbus registers (thanks again for descriptions
James) and improves mixer for this card. Now you can use S/PDIF and ADAT on
Mirodock and also use headpohone output on host cardbus card as another
independent output.
Signed-off-by: Ctirad Fertr <c.fertr@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Notebook.
Description: The .device=0x0008 chips have new, but different EMU32 in/out
channels. Driver updated to make use of these EMU32 channels.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* adding 8 more 32-bit capture channels (total of 16) for emu1010 cards
* adding some code comments and card details description
Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Mark TLV data as 'const'
Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Fix ABI for older ld10k1. When no EMU10K1_PVERSION ioctl is issued,
the driver accepts ioctls with the old struct size without TLV information.
Also, changed the struct field to make the conversion easier from the
old to the new structs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Implement functionallity in order to fixe ALSA bug#2058.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
