IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update the ionic driver to make use of ethtool_sprintf. In addition add
separate functions for Tx/Rx stats strings in order to reduce the total
amount of indenting needed in the driver code.
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the bnad_get_strings to make use of ethtool_sprintf and avoid
unnecessary line wrapping. To do this we invert the logic for the string
set test and instead exit immediately if we are not working with the stats
strings. In addition the function is broken up into subfunctions for each
area so that we can simply call ethtool_sprintf once for each string in a
given subsection.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace instances of snprintf or memcpy with a pointer update with
ethtool_sprintf.
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the hisilicon drivers to make use of ethtool_sprintf. The general
idea is to reduce code size and overhead by replacing the repeated pattern
of string printf statements and ETH_STRING_LEN counter increments.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nfp_pr_et function is nearly identical to ethtool_sprintf except for
the fact that it passes the pointer by value and as a return whereas
ethtool_sprintf passes it as a pointer.
Since they are so close just update nfp to make use of ethtool_sprintf
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the Intel drivers to make use of ethtool_sprintf. The general idea
is to reduce code size and overhead by replacing the repeated pattern of
string printf statements and ETH_STRING_LEN counter increments.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 uplink representor netdev persistence.
Before this patchset we used to have separate netdevs for Native NIC mode
and Switchdev mode (uplink representor netdev), meaning that if user
switches modes between Native to Switchdev and vice versa, the driver
would cleanup the current netdev representor and create a new one for the
new mode, such behavior created an administrative nightmare for users,
where users need to be aware of such loss of both data path and control
path configurations, e.g. netdev attributes and arp/route tables,
where the later is more painful.
A simple solution for this is not to replace the netdev in first place
and use a single netdev to serve the uplink/physical port whether it is
in switchdev mode or native mode.
We already have different HW profiles for each netdev mode, in this series
we just replace the HW profile on the fly and we keep the same netdev
attached.
Refactoring: Some refactoring has been made to overcome some technical
difficulties
1) The netdev is created with the maximum amount of tx/rx queues to serve
the two profiles.
2) Some ndos are not supported in some modes, so we added a mode check for
such cases, e.g legacy sriov ndos must be blocked in switchdev mode.
3) Some mlx5 netdev private attributes need to be moved out of profiles
and kept in a persistent place, where the netdev is created
e.g devlink port and other global HW resources
4) The netdev devlink port is now always registered with the switch id
Implementation: the last three patches implement the mechanism now as the
netdev can be shared.
5) Don't recreate the netdev on switchdev mode changes
6) Prevent changing switchdev mode when some netdev operations
are active, mostly when TC rules are being processed.
This is required since the netdev is kept registered while switchdev mode
can be changed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmBRQ9sACgkQSD+KveBX
+j7mLQf/SyOuP+Hu2TKss79JhQCJb0FJ3bmwaXqenSbgRGQYi6dZN70/ywlR2ajQ
0gRococ+y4OUJQQi0cDwMZ7AWo6bYc8rMUKRgjxqIsfYhyG+FAX9BoLi0jApplKK
MkdPbzotrsAiOomF2cQJjYFpMDU3NpTKIv/eUlMowLhLdx7oK4XGohUkh2eICUhG
5PPuZstYR5OvgOaQLHpXtkDAw7I/IWPOp6Y2sqDqmgESkpS7jaKhqvmtIi8F5u+L
0FyLsyHP2keudOtfG05rpDq0n+56Z/lRFbWpFNReF1oQOizCGXM11QdHtsl4EZtQ
LqPinLYbeGOWhXo+8gRipG7eLSKkYg==
=k64c
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-03-16
mlx5 uplink representor netdev persistence.
Before this patchset we used to have separate netdevs for Native NIC mode
and Switchdev mode (uplink representor netdev), meaning that if user
switches modes between Native to Switchdev and vice versa, the driver
would cleanup the current netdev representor and create a new one for the
new mode, such behavior created an administrative nightmare for users,
where users need to be aware of such loss of both data path and control
path configurations, e.g. netdev attributes and arp/route tables,
where the later is more painful.
A simple solution for this is not to replace the netdev in first place
and use a single netdev to serve the uplink/physical port whether it is
in switchdev mode or native mode.
We already have different HW profiles for each netdev mode, in this series
we just replace the HW profile on the fly and we keep the same netdev
attached.
Refactoring: Some refactoring has been made to overcome some technical
difficulties
1) The netdev is created with the maximum amount of tx/rx queues to serve
the two profiles.
2) Some ndos are not supported in some modes, so we added a mode check for
such cases, e.g legacy sriov ndos must be blocked in switchdev mode.
3) Some mlx5 netdev private attributes need to be moved out of profiles
and kept in a persistent place, where the netdev is created
e.g devlink port and other global HW resources
4) The netdev devlink port is now always registered with the switch id
Implementation: the last three patches implement the mechanism now as the
netdev can be shared.
5) Don't recreate the netdev on switchdev mode changes
6) Prevent changing switchdev mode when some netdev operations
are active, mostly when TC rules are being processed.
This is required since the netdev is kept registered while switchdev mode
can be changed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We re-use the native NIC port net device instance for the Uplink
representor, a driver currently cannot unbind TC setup callback
actively, hence protect changing E-Switch mode while adding rules.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
E-Switch mode change routine will take the write lock to prevent any
consumer to access the E-Switch resources while E-Switch is going
through a mode change.
In the next patch
E-Switch consumers (e.g vport representors) will take read_lock prior to
accessing E-Switch resources to prevent E-Switch mode changing in the
middle of the operation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When switching modes between legacy and switchdev and back, do not
reload ethernet interfaces. just change the profile from nic profile
to uplink rep profile in switchdev mode.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When we clean all the interfaces, i.e. rescan or reload module,
we need to clean eth-reps devices first, before eth devices.
We will re-use the native NIC port net device instance for the Uplink
representor. Changing eswitch mode will skip destroying the eth device
so the net device won't be destroyed and only change the profile.
Creating uplink eth-rep will initialize the representor related resources.
In that sense when we destroy all devices we first need to destroy
eth-rep devices so uplink eth-rep will clean all representor related
resources and only then destroy the eth device which will destroy rest
of the resources and the net device.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We re-use the native NIC port net device instance for the Uplink
representor, and the devlink port.
When changing profiles we reset the mlx5e priv but we should still
use the devlink port so move it to mlx5e resources.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This is to separate between resources attributes and other
attributes we will want to use.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor. Since the netdev will be kept registered while we engage
switchdev mode also the devlink will be kept registered.
Register the nic devlink port with switch id so it will be available
when changing profiles.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor. As such we also don't want to unregister/register the
devlink port as part of the profile.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor. While changing profiles private resources are not
available but some ndos are not checking if the netdev is present.
So for those ndos check the netdev is present in the driver before
accessing the private resources.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove dedicated uplink rep netdev ndos and ethtools ops.
We will re-use the native NIC port net device instance and ethtool ops for
the Uplink representor.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor, hence same ndos must be used.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor, hence same ndos will be used.
Now we need to distinguish in the TC callback if the mode is legacy or
switchdev and set the proper flag.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will re-use the native NIC port net device instance for the Uplink
representor. Several VF ndo ops are not relevant in switchdev mode.
Disallow them when eswitch mode is not legacy as a preparation.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In downstream patches NIC netdev can change profile dynamically from
NIC mode to uplink mode and vise-versa. It is required that both profiles
must advertise the same max amount of tx/rx queues.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Now when extracting frames from CPU the cpuq is not used anymore so
remove it.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends MRP support for Ocelot. It allows to have multiple
rings and when the node has the MRC role it forwards MRP Test frames in
HW. For MRM there is no change.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new PGID that is used not to forward frames anywhere. It is used
by MRP to make sure that MRP Test frames will not reach CPU port.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-03-16
This series contains updates to i40e, ixgbe, and ice drivers.
Magnus Karlsson says:
Optimize run_xdp_zc() for the XDP program verdict being XDP_REDIRECT
in the xsk zero-copy path. This path is only used when having AF_XDP
zero-copy on and in that case most packets will be directed to user
space. This provides around 100k extra packets in throughput on my
server when running l2fwd in xdpsock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for action sample when used with a flower classifier
by implementing the required sampler_add() / sampler_del() callbacks and
registering an Rx listener for the sampled packets.
The sampler_add() callback returns an error for Spectrum-1 as the
functionality is not supported. In Spectrum-{2,3} the callback creates a
mirroring agent towards the CPU. The agent's identifier is used by the
policy engine code to mirror towards the CPU with probability.
The Rx listener for the sampled packet is registered with the 'policy
engine' mirroring reason and passes trapped packets to the psample
module after looking up their parameters (e.g., sampling group).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add core functionality required to support mirror sampler action in the
policy engine. The switch driver (e.g., 'mlxsw_spectrum') is required to
implement the sampler_add() / sampler_del() callbacks that perform the
necessary configuration before the sampler action can be installed. The
next patch will implement it for Spectrum-{2,3}, while Spectrum-1 will
return an error, given it is not supported.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow user space to install a matchall classifier with sample action on
egress. This is only supported on Spectrum-2 onwards, so Spectrum-1 will
continue to return an error.
Programming the hardware to sample on egress is identical to ingress
sampling with the sole change of using a different sampling trigger.
Upon receiving a sampled packet, the sampling trigger (ingress vs.
egress) will be encoded in the mirroring reason in the Completion Queue
Element (CQE). The mirroring reason is used to lookup the sampling
parameters (e.g., psample group) which are passed to the psample module.
Note that locally generated packets that are sampled are simply
consumed. This is done for several reasons.
First, such packets do not have an ingress netdev given that their Rx
local port is the CPU port. This breaks several basic assumptions.
Second, sampling using the same interface (tc), but with flower
classifier will not result in locally generated packets being sampled
given that such packets are not subject to the policy engine.
Third, realistically, this is not a big deal given that the vast
majority of the packets being transmitted through the port are not
locally generated packets.
Fourth, if such packets do need to be sampled, they can be sampled with
a 'skip_hw' filter and reported to the same sampling group as the data
path packets. The software sampling rate can also be adjusted to fit the
rate of the locally generated packets which is much lower than the rate
of the data path traffic.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start using the previously introduced sampling triggers hash table to
store sampling parameters instead of storing them as attributes of the
sampled port.
This makes it easier to introduce new sampling triggers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, mlxsw supports a single sampling trigger type (i.e., received
packet). When sampling is configured on an ingress port, the sampling
parameters (e.g., pointer to the psample group) are stored as an
attribute of the port, so that they could be passed to
psample_sample_packet() when a sampled packet is trapped to the CPU.
Subsequent patches are going to add more types of sampling triggers,
making it difficult to maintain the current scheme.
Instead, store all the active sampling triggers with their associated
parameters in a hash table. That way, more trigger types can be easily
added.
The next patch will flip mlxsw to use the hash table instead of the
current scheme.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The entry will be required by the next patches, so pass it. No
functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push some sampling checks to the per-ASIC operations, as they are no
longer relevant for all ASICs.
The sampling rate validation against the MPSC maximum rate is only
relevant for Spectrum-1, as Spectrum-2 and later ASICs no longer use
MPSC register for sampling.
The ingress / egress validation is pushed down to the per-ASIC
operations since subsequent patches are going to remove it for
Spectrum-2 and later ASICs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the differences between Spectrum-1 and later ASICs, some of the
checks currently performed at the common code (where extack is
available) will need to be pushed to the per-ASIC operations.
As a preparation, propagate extack further to maintain proper error
reporting.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running kernel-doc over the dpaa2-eth driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory, respecting the kdoc format for macro documentation and
other small changes like describing the expected return values of
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiple ABI function declarations are split unnecessarry on multiple
lines. Fix this so that we have a consistent coding style.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The maximum number of DPAA2 switch interfaces, including the control
interface, is 64. Even though this restriction existed from the first
place, the command structures which use an interface id bitmap were
poorly described and even though a single uint64_t is enough, all of
them used an array of 4 uint64_t's.
Fix this by reducing the size of the interface id field to a single
uint64_t.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running kernel-doc over the dpaa2-switch driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory and adding a bit more context for the
dpsw_if_get_port_mac_addr() function and the fields of the
dpsw_vlan_if_cfg structure.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup the dpaa2-switch driver a bit by removing any unused MC firmware
ABI definitions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-03-15
This series contains updates to e1000e only.
Chen Yu says:
The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to
wake up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gather the Tx packet and byte counts and call
netdev_tx_completed_queue() only once per clean cycle.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The descriptor mappings are set up the same way whether
or not it is a TSO, so we don't need separate logic for
the two cases.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the new ionic_tx_map_tso() usable by the non-TSO paths,
and pull the call up a level into ionic_tx() before calling
the csum or no-csum routines.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
One issue with the original TSO code was that it was working too
hard to deal with skb layouts that were never going to show up,
such as an skb->data that was longer than a single descriptor's
length. The other issue was trying to arrange the fragment dma
mapping at the same time as figuring out the descriptors needed.
There was just too much going on at the same time.
Now we do the dma mapping first, which sets up the buffers with
skb->data in buf[0] and the remaining frags in buf[1..n-1].
Next we spread the bufs across the descriptors needed, where
each descriptor gets up to mss number of bytes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the use of C bit-fields in the rmnet_map_ul_csum_header
structure with a single two-byte (big endian) structure member,
and use masks to encode or get values within it. The content of
these fields can be accessed using simple bitwise AND and OR
operations on the (host byte order) value of the new structure
member.
Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field
values in host byte order, then forcibly fix their byte order using
a combination of byte swap operations and types.
Instead, just compute the value that needs to go into the new
structure member and save it with a simple byte-order conversion.
Make similar simplifications in rmnet_map_ipv6_ul_csum_header().
Finally, in rmnet_map_checksum_uplink_packet() a set of assignments
zeroes every field in the upload checksum header. Replace that with
a single memset() operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the use of C bit-fields in the rmnet_map_dl_csum_trailer
structure with a single one-byte field, using constant field masks
to encode or get at embedded values.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The actual layout of bits defined in C bit-fields (e.g. int foo : 3)
is implementation-defined. Structures defined in <linux/if_rmnet.h>
address this by specifying all bit-fields twice, to cover two
possible layouts.
I think this pattern is repetitive and noisy, and I find the whole
notion of compiler "bitfield endianness" to be non-intuitive.
Stop using C bit-fields for the command/data flag and the pad length
fields in the rmnet_map structure, and define a single-byte flags
field instead. Define a mask for the single-bit "command" flag,
and another mask for the encoded pad length. The content of both
fields can be accessed using a simple bitwise AND operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following macros, defined in "rmnet_map.h", assume a socket
buffer is provided as an argument without any real indication this
is the case.
RMNET_MAP_GET_MUX_ID()
RMNET_MAP_GET_CD_BIT()
RMNET_MAP_GET_PAD()
RMNET_MAP_GET_CMD_START()
RMNET_MAP_GET_LENGTH()
What they hide is pretty trivial accessing of fields in a structure,
and it's much clearer to see this if we do these accesses directly.
So rather than using these accessor macros, assign a local
variable of the map header pointer type to the socket buffer data
pointer, and derereference that pointer variable.
In "rmnet_map_data.c", use sizeof(object) rather than sizeof(type)
in one spot. Also, there's no need to byte swap 0; it's all zeros
irrespective of endianness.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rmnet_map_ipv4_ul_csum_header() and rmnet_map_ipv6_ul_csum_header()
the offset within a packet at which checksumming should commence is
calculated. This calculation involves byte swapping and a forced type
conversion that makes it hard to understand.
Simplify this by computing the offset in host byte order, then
converting the result when assigning it into the header field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although there is platform issue of runtime suspend support
on CNP, it would be more flexible to let the user decide whether
to disable runtime or not because:
1. This can be done in userspace via
echo on > /sys/devices/pci0000\:00/0000\:00\:1f.d/power/control
2. More and more NICs would support runtime suspend, disabling the
runtime suspend on them by default would impact the validation.
Only disable runtime suspend on CNP in case of any user space regression.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to wake
up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
This patch introduces the .prepare() for e1000e so that if the NIC is runtime
suspended the subsequent suspend/resume hooks will be skipped so as to speed
up the s2ram. The pm core will check whether the NIC is a wake up device so
there's no need to check it again in .prepare(). DPM_FLAG_SMART_PREPARE flag
should be set during probe to ask the pci subsystem to honor the driver's
prepare() result. Besides, the NIC remains runtime suspended after resumed
from s2ram as there is no need to resume it.
Tested on i7-2600K with 82579V NIC
Before the patch:
e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x160 returned 0 after 225146 usecs
e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 140588 usecs
After the patch:
echo disabled > //sys/devices/pci0000\:00/0000\:00\:19.0/power/wakeup
becomes 0 usecs because the hooks will be skipped.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
