Luiz Augusto von Dentz
ad383c2c65
Bluetooth: hci_sync: Enable advertising when LL privacy is enabled
...
This enables advertising when LL privacy is enabled and changes the
command sequence when resolving list is updated to also account for when
advertising is enabled using the following sequence:
If there are devices to scan:
Disable Scanning -> Update Accept List ->
use_ll_privacy((Disable Advertising) -> Disable Resolving List ->
Update Resolving List -> Enable Resolving List -> (Enable Advertising)) ->
Enable Scanning
Otherwise:
Disable Scanning
Errors during the Update Accept List stage are handled gracefully by
restoring any previous state (e.g. advertising) and disabling the use of
accept list as either accept list or resolving list could not be
updated.
Tested with:
mgmt-tester -s "LL Privacy"
Test Summary
------------
LL Privacy - Add Device 1 (Add to WL) Passed
LL Privacy - Add Device 2 (Add to RL) Passed
LL Privacy - Add Device 3 (Enable RL) Passed
LL Privacy - Add Device 4 (2 Devices to WL) Passed
LL Privacy - Add Device 5 (2 Devices to RL) Passed
LL Privacy - Add Device 6 (RL is full) Passed
LL Privacy - Add Device 7 (WL is full) Passed
LL Privacy - Add Device 8 (Disable Adv) Passed
LL Privacy - Add Device 9 (Multi Adv) Passed
LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed
LL Privacy - Remove Device 1 (Remove from WL) Passed
LL Privacy - Remove Device 2 (Remove from RL) Passed
LL Privacy - Remove Device 3 (Disable RL) Passed
LL Privacy - Remove Device 4 (Disable Adv) Passed
LL Privacy - Remove Device 5 (Multi Adv) Passed
LL Privacy - Start Discovery 1 (Disable RL) Passed
LL Privacy - Start Discovery 2 (Disable RL) Passed
Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29 16:51:58 +02:00
Luiz Augusto von Dentz
e8907f7654
Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3
...
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Device
Remove Device
Tested with:
mgmt-tester -s "Add Device"
Test Summary
------------
Add Device - Invalid Params 1 Passed
Add Device - Invalid Params 2 Passed
Add Device - Invalid Params 3 Passed
Add Device - Invalid Params 4 Passed
Add Device - Success 1 Passed
Add Device - Success 2 Passed
Add Device - Success 3 Passed
Add Device - Success 4 Passed
Add Device - Success 5 Passed
Add Device - Success 6 - Add to whitelist Passed
Add Device - Success 7 - Add to resolv list Passed
Add Device - Success 8 - Enable resolv list Passed
Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.209 seconds
mgmt-tester -s "Remove Device"
Test Summary
------------
Remove Device - Invalid Params 1 Passed
Remove Device - Invalid Params 2 Passed
Remove Device - Invalid Params 3 Passed
Remove Device - Success 1 Passed
Remove Device - Success 2 Passed
Remove Device - Success 3 Passed
Remove Device - Success 4 Passed
Remove Device - Success 5 Passed
Remove Device - Success 6 - All Devices Passed
Remove Device - Success 7 - Remove from whitelist Passed
Remove Device - Success 8 - Remove from resolv list Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 4.26 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29 16:51:58 +02:00
Luiz Augusto von Dentz
cba6b75871
Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2
...
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Advertising
Remove Advertising
Add Extended Advertising Parameters
Add Extended Advertising Data
mgmt-tester -s "Add Advertising"
Test Summary
------------
Add Advertising - Failure: LE off Passed
Add Advertising - Invalid Params 1 (AD too long) Passed
Add Advertising - Invalid Params 2 (Malformed len) Passed
Add Advertising - Invalid Params 3 (Malformed len) Passed
Add Advertising - Invalid Params 4 (Malformed len) Passed
Add Advertising - Invalid Params 5 (AD too long) Passed
Add Advertising - Invalid Params 6 (ScRsp too long) Passed
Add Advertising - Invalid Params 7 (Malformed len) Passed
Add Advertising - Invalid Params 8 (Malformed len) Passed
Add Advertising - Invalid Params 9 (Malformed len) Passed
Add Advertising - Invalid Params 10 (ScRsp too long) Passed
Add Advertising - Rejected (Timeout, !Powered) Passed
Add Advertising - Success 1 (Powered, Add Adv Inst) Passed
Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed
Add Advertising - Success 3 (!Powered, Adv Enable) Passed
Add Advertising - Success 4 (Set Adv on override) Passed
Add Advertising - Success 5 (Set Adv off override) Passed
Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed
Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed
Add Advertising - Success 8 (Connectable Flag) Passed
Add Advertising - Success 9 (General Discov Flag) Passed
Add Advertising - Success 10 (Limited Discov Flag) Passed
Add Advertising - Success 11 (Managed Flags) Passed
Add Advertising - Success 12 (TX Power Flag) Passed
Add Advertising - Success 13 (ADV_SCAN_IND) Passed
Add Advertising - Success 14 (ADV_NONCONN_IND) Passed
Add Advertising - Success 15 (ADV_IND) Passed
Add Advertising - Success 16 (Connectable -> on) Passed
Add Advertising - Success 17 (Connectable -> off) Passed
Add Advertising - Success 18 (Power -> off, Remove) Passed
Add Advertising - Success 19 (Power -> off, Keep) Passed
Add Advertising - Success 20 (Add Adv override) Passed
Add Advertising - Success 21 (Timeout expires) Passed
Add Advertising - Success 22 (LE -> off, Remove) Passed
Add Advertising - Success (Empty ScRsp) Passed
Add Advertising - Success (ScRsp only) Passed
Add Advertising - Invalid Params (ScRsp too long) Passed
Add Advertising - Success (ScRsp appear) Passed
Add Advertising - Invalid Params (ScRsp appear long) Passed
Add Advertising - Success (Appear is null) Passed
Add Advertising - Success (Name is null) Passed
Add Advertising - Success (Complete name) Passed
Add Advertising - Success (Shortened name) Passed
Add Advertising - Success (Short name) Passed
Add Advertising - Success (Name + data) Passed
Add Advertising - Invalid Params (Name + data) Passed
Add Advertising - Success (Name+data+appear) Passed
Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 2.17 seconds
mgmt-tester -s "Remove Advertising"
Test Summary
------------
Remove Advertising - Invalid Params 1 Passed
Remove Advertising - Success 1 Passed
Remove Advertising - Success 2 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0585 seconds
mgmt-tester -s "Ext Adv MGMT Params"
Test Summary:
------------
Ext Adv MGMT Params - Unpowered Passed
Ext Adv MGMT Params - Invalid parameters Passed
Ext Adv MGMT Params - Success Passed
Ext Adv MGMT Params - (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0746 seconds
mgmt-tester -s "Ext Adv MGMT -"
Test Summary
------------
Ext Adv MGMT - Data set without Params Passed
Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed
Ext Adv MGMT - AD Data (5.0) Success Passed
Ext Adv MGMT - AD Scan Response (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0805 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29 16:51:58 +02:00
Luiz Augusto von Dentz
161510ccf9
Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1
...
This make use of hci_cmd_sync_queue for the following MGMT commands:
Set Device Class
Set Device ID
Add UUID
Remove UUID
tools/mgmt-tester -s "Set Device Class"
Test Summary
------------
Set Device Class - Success 1 Passed
Set Device Class - Success 2 Passed
Set Device Class - Invalid parameters 1 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0599 seconds
tools/mgmt-tester -s "Set Device ID"
Test Summary
------------
Set Device ID - Success 1 Passed
Set Device ID - Success 2 Passed
Set Device ID - Disable Passed
Set Device ID - Power off and Power on Passed
Set Device ID - SSP off and Power on Passed
Set Device ID - Invalid Parameter Passed
Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.107 seconds
tools/mgmt-tester -s "Add UUID"
Test Summary
------------
Add UUID - UUID-16 1 Passed
Add UUID - UUID-16 multiple 1 Passed
Add UUID - UUID-16 partial 1 Passed
Add UUID - UUID-32 1 Passed
Add UUID - UUID-32 multiple 1 Passed
Add UUID - UUID-32 partial 1 Passed
Add UUID - UUID-128 1 Passed
Add UUID - UUID-128 multiple 1 Passed
Add UUID - UUID-128 partial 1 Passed
Add UUID - UUID mix Passed
Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.198 seconds
tools/mgmt-tester -s "Remove UUID"
Test Summary
------------
Remove UUID - Success 1 Passed
Remove UUID - All UUID - Success 2 Passed
Remove UUID - Power Off - Success 3 Passed
Remove UUID - Power Off and On - Success 4 Passed
Remove UUID - Not Exist - Invalid Params 1 Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0908 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29 16:51:58 +02:00
Marcel Holtmann
6a98e3836f
Bluetooth: Add helper for serialized HCI command execution
...
The usage of __hci_cmd_sync() within the hdev->setup() callback allows for
a nice and simple serialized execution of HCI commands. More importantly
it allows for result processing before issueing the next command.
With the current usage of hci_req_run() it is possible to batch up
commands and execute them, but it is impossible to react to their
results or errors.
This is an attempt to generalize the hdev->setup() handling and provide
a simple way of running multiple HCI commands from a single function
context.
There are multiple struct work that are decdicated to certain tasks
already used right now. It is add a lot of bloat to hci_dev struct and
extra handling code. So it might be possible to put all of these behind
a common HCI command infrastructure and just execute the HCI commands
from the same work context in a serialized fashion.
For example updating the white list and resolving list can be done now
without having to know the list size ahead of time. Also preparing for
suspend or resume shouldn't require a state machine anymore. There are
other tasks that should be simplified as well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29 16:51:58 +02:00
Luiz Augusto von Dentz
Marcel Holtmann