IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With commit "io_uring: cache req->apoll->events in req->cflags" applied,
we now have just io_poll_remove_entries() dipping into req->apoll when
it isn't strictly necessary.
Mark poll and double-poll with a flag, so we know if we need to look
at apoll->double_poll. This avoids pulling in those cachelines if we
don't need them. The common case is that the poll wake handler already
removed these entries while hot off the completion path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we arm poll on behalf of a different type of request, like a network
receive, then we allocate req->apoll as our poll entry. Running network
workloads shows io_poll_check_events() as the most expensive part of
io_uring, and it's all due to having to pull in req->apoll instead of
just the request which we have hot already.
Cache poll->events in req->cflags, which isn't used until the request
completes anyway. This isn't strictly needed for regular poll, where
req->poll.events is used and thus already hot, but for the sake of
unification we do it all around.
This saves 3-4% of overhead in certain request workloads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This serves two purposes:
- We now have the last cacheline mostly unused for generic workloads,
instead of having to pull in the poll refs explicitly for workloads
that rely on poll arming.
- It shrinks the io_kiocb from 232 to 224 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Particularly for networked workloads, io_uring intensively uses its
poll based backend to get a notification when data/space is available.
Profiling workloads, we see 3-4% of alloc+free that is directly attributed
to just the apoll allocation and free (and the rest being skb alloc+free).
For the fast path, we have ctx->uring_lock held already for both issue
and the inline completions, and we can utilize that to avoid any extra
locking needed to have a basic recycling cache for the apoll entries on
both the alloc and free side.
Double poll still requires an allocation. But those are rare and not
a fast path item.
With the simple cache in place, we see a 3-4% reduction in overhead for
the workload.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Julia and the kernel test robot report that the prep handling for this
command inadvertently checks one field twice:
fs/io_uring.c:4338:42-56: duplicated argument to && or ||
Get rid of it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 4f57f06ce218 ("io_uring: add support for IORING_OP_MSG_RING command")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, io_uring will stop submitting a batch of requests if we run
into an error submitting a request. This isn't strictly necessary, as
the error result is passed out-of-band via a CQE anyway. And it can be
a bit confusing for some applications.
Provide a way to setup a ring that will continue submitting on error,
when the error CQE has been posted.
There's still one case that will break out of submission. If we fail
allocating a request, then we'll still return -ENOMEM. We could in theory
post a CQE for that condition too even if we never got a request. Leave
that for a potential followup.
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we are using provided buffers, it's less than useful to have a buffer
selected and pinned if a request needs to go async or arms poll for
notification trigger on when we can process it.
Recycle the buffer in those events, so we don't pin it for the duration
of the request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the logic in io_read() deals with regular files, and in some ways
it would make sense to split the handling into S_IFREG and others. But
at least for retry, we don't need to bother setting up a bunch of state
just to abort in the loop later. In particular, don't bother forcing
setup of async data for a normal non-vectored read when we don't need it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sqpoll thread can be used for performing the napi busy poll in a
similar way that it does io polling for file systems supporting direct
access bypassing the page cache.
The other way that io_uring can be used for napi busy poll is by
calling io_uring_enter() to get events.
If the user specify a timeout value, it is distributed between polling
and sleeping by using the systemwide setting
/proc/sys/net/core/busy_poll.
The changes have been tested with this program:
https://github.com/lano1106/io_uring_udp_ping
and the result is:
Without sqpoll:
NAPI busy loop disabled:
rtt min/avg/max/mdev = 40.631/42.050/58.667/1.547 us
NAPI busy loop enabled:
rtt min/avg/max/mdev = 30.619/31.753/61.433/1.456 us
With sqpoll:
NAPI busy loop disabled:
rtt min/avg/max/mdev = 42.087/44.438/59.508/1.533 us
NAPI busy loop enabled:
rtt min/avg/max/mdev = 35.779/37.347/52.201/0.924 us
Co-developed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/810bd9408ffc510ff08269e78dca9df4af0b9e4e.1646777484.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for IORING_OP_MSG_RING, which allows an SQE to signal
another ring. That allows either waking up someone waiting on the ring,
or even passing a 64-bit value via the user_data field in the CQE.
sqe->fd must contain the fd of a ring that should receive the CQE.
sqe->off will be propagated to the cqe->user_data on the target ring,
and sqe->len will be propagated to cqe->res. The results CQE will have
IORING_CQE_F_MSG set in its flags, to indicate that this CQE was generated
from a messaging request rather than a SQE issued locally on that ring.
This effectively allows passing a 64-bit and a 32-bit quantify between
the two rings.
This request type has the following request specific error cases:
- -EBADFD. Set if the sqe->fd doesn't point to a file descriptor that is
of the io_uring type.
- -EOVERFLOW. Set if we were not able to deliver a request to the target
ring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In testing high frequency workloads with provided buffers, we spend a
lot of time in allocating and freeing the buffer units themselves.
Rather than repeatedly free and alloc them, add a recycling cache
instead. There are two caches:
- ctx->io_buffers_cache. This is the one we grab from in the submission
path, and it's protected by ctx->uring_lock. For inline completions,
we can recycle straight back to this cache and not need any extra
locking.
- ctx->io_buffers_comp. If we're not under uring_lock, then we use this
list to recycle buffers. It's protected by the completion_lock.
On adding a new buffer, check io_buffers_cache. If it's empty, check if
we can splice entries from the io_buffers_comp_cache.
This reduces about 5-10% of overhead from provided buffers, bringing it
pretty close to the non-provided path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lots of workloads use multiple threads, in which case the file table is
shared between them. This makes getting and putting the ring file
descriptor for each io_uring_enter(2) system call more expensive, as it
involves an atomic get and put for each call.
Similarly to how we allow registering normal file descriptors to avoid
this overhead, add support for an io_uring_register(2) API that allows
to register the ring fds themselves:
1) IORING_REGISTER_RING_FDS - takes an array of io_uring_rsrc_update
structs, and registers them with the task.
2) IORING_UNREGISTER_RING_FDS - takes an array of io_uring_src_update
structs, and unregisters them.
When a ring fd is registered, it is internally represented by an offset.
This offset is returned to the application, and the application then
uses this offset and sets IORING_ENTER_REGISTERED_RING for the
io_uring_enter(2) system call. This works just like using a registered
file descriptor, rather than a real one, in an SQE, where
IOSQE_FIXED_FILE gets set to tell io_uring that we're using an internal
offset/descriptor rather than a real file descriptor.
In initial testing, this provides a nice bump in performance for
threaded applications in real world cases where the batch count (eg
number of requests submitted per io_uring_enter(2) invocation) is low.
In a microbenchmark, submitting NOP requests, we see the following
increases in performance:
Requests per syscall Baseline Registered Increase
----------------------------------------------------------------
1 ~7030K ~8080K +15%
2 ~13120K ~14800K +13%
4 ~22740K ~25300K +11%
Co-developed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a slight optimisation to be had by calculating the correct pos
pointer inside io_kiocb_update_pos and then using that later.
It seems code size drops by a bit:
000000000000a1b0 0000000000000400 t io_read
000000000000a5b0 0000000000000319 t io_write
vs
000000000000a1b0 00000000000003f6 t io_read
000000000000a5b0 0000000000000310 t io_write
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update kiocb->ki_pos at execution time rather than in io_prep_rw().
io_prep_rw() happens before the job is enqueued to a worker and so the
offset might be read multiple times before being executed once.
Ensures that the file position in a set of _linked_ SQEs will be only
obtained after earlier SQEs have completed, and so will include their
incremented file position.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb_ppos is called in both branches, and it seems that the compiler
does not fuse this. Fusing removes a few bytes from loop_rw_iter.
Before:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 0000000000000124 t loop_rw_iter
After:
$ nm -S fs/io_uring.o | grep loop_rw_iter
0000000000002430 000000000000010d t loop_rw_iter
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This makes the io-uring tracepoints consistent. Where it makes sense
the tracepoints start with the following four fields:
- context (ring)
- request
- user_data
- opcode.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-3-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This introduces the __fill_cqe function. This is necessary
to correctly issue the io_uring_complete tracepoint.
Signed-off-by: Stefan Roesch <shr@fb.com>
Link: https://lore.kernel.org/r/20220214180430.70572-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
wqe->lock is abused, it now protects acct->work_list, hash stuff,
nr_workers, wqe->free_list and so on. Lets first get the work_list out
of the wqe-lock mess by introduce a specific lock for work list. This
is the first step to solve the huge contension between work insertion
and work consumption.
good thing:
- split locking for bound and unbound work list
- reduce contension between work_list visit and (worker's)free_list.
For the hash stuff, since there won't be a work with same file in both
bound and unbound work list, thus they won't visit same hash entry. it
works well to use the new lock to protect hash stuff.
Results:
set max_unbound_worker = 4, test with echo-server:
nice -n -15 ./io_uring_echo_server -p 8081 -f -n 1000 -l 16
(-n connection, -l workload)
before this patch:
Samples: 2M of event 'cycles:ppp', Event count (approx.): 1239982111074
Overhead Command Shared Object Symbol
28.59% iou-wrk-10021 [kernel.vmlinux] [k] native_queued_spin_lock_slowpath
8.89% io_uring_echo_s [kernel.vmlinux] [k] native_queued_spin_lock_slowpath
6.20% iou-wrk-10021 [kernel.vmlinux] [k] _raw_spin_lock
2.45% io_uring_echo_s [kernel.vmlinux] [k] io_prep_async_work
2.36% iou-wrk-10021 [kernel.vmlinux] [k] _raw_spin_lock_irqsave
2.29% iou-wrk-10021 [kernel.vmlinux] [k] io_worker_handle_work
1.29% io_uring_echo_s [kernel.vmlinux] [k] io_wqe_enqueue
1.06% iou-wrk-10021 [kernel.vmlinux] [k] io_wqe_worker
1.06% io_uring_echo_s [kernel.vmlinux] [k] _raw_spin_lock
1.03% iou-wrk-10021 [kernel.vmlinux] [k] __schedule
0.99% iou-wrk-10021 [kernel.vmlinux] [k] tcp_sendmsg_locked
with this patch:
Samples: 1M of event 'cycles:ppp', Event count (approx.): 708446691943
Overhead Command Shared Object Symbol
16.86% iou-wrk-10893 [kernel.vmlinux] [k] native_queued_spin_lock_slowpat
9.10% iou-wrk-10893 [kernel.vmlinux] [k] _raw_spin_lock
4.53% io_uring_echo_s [kernel.vmlinux] [k] native_queued_spin_lock_slowpat
2.87% iou-wrk-10893 [kernel.vmlinux] [k] io_worker_handle_work
2.57% iou-wrk-10893 [kernel.vmlinux] [k] _raw_spin_lock_irqsave
2.56% io_uring_echo_s [kernel.vmlinux] [k] io_prep_async_work
1.82% io_uring_echo_s [kernel.vmlinux] [k] _raw_spin_lock
1.33% iou-wrk-10893 [kernel.vmlinux] [k] io_wqe_worker
1.26% io_uring_echo_s [kernel.vmlinux] [k] try_to_wake_up
spin_lock failure from 25.59% + 8.89% = 34.48% to 16.86% + 4.53% = 21.39%
TPS is similar, while cpu usage is from almost 400% to 350%
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220206095241.121485-2-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clang warns:
fs/io_uring.c:9396:9: warning: variable 'ret' is uninitialized when used here [-Wuninitialized]
return ret;
^~~
fs/io_uring.c:9373:13: note: initialize the variable 'ret' to silence this warning
int fd, ret;
^
= 0
1 warning generated.
Just return 0 directly and reduce the scope of ret to the if statement,
as that is the only place that it is used, which is how the function was
before the fixes commit.
Fixes: 1a75fac9a0f9 ("io_uring: avoid ring quiesce while registering/unregistering eventfd")
Link: https://github.com/ClangBuiltLinux/linux/issues/1579
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220207162410.1013466-1-nathan@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
None of the opcodes in io_uring_register use ring quiesce anymore. Hence
io_register_op_must_quiesce always returns false and io_ctx_quiesce is
never called.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-6-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_R_DISABLED prevents submitting requests and so there will be
no requests until IORING_REGISTER_ENABLE_RINGS is called. And
IORING_REGISTER_RESTRICTIONS works only before
IORING_REGISTER_ENABLE_RINGS is called. Hence ring quiesce is not needed
for these opcodes.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-5-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done using the RCU data structure (io_ev_fd). eventfd_async is
moved from io_ring_ctx to io_ev_fd which is RCU protected hence avoiding
ring quiesce which is much more expensive than an RCU lock. The place
where eventfd_async is read is already under rcu_read_lock so there is no
extra RCU read-side critical section needed.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-4-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is done by creating a new RCU data structure (io_ev_fd) as part of
io_ring_ctx that holds the eventfd_ctx.
The function io_eventfd_signal is executed under rcu_read_lock with a
single rcu_dereference to io_ev_fd so that if another thread unregisters
the eventfd while io_eventfd_signal is still being executed, the
eventfd_signal for which io_eventfd_signal was called completes
successfully.
The process of registering/unregistering eventfd is already done under
uring_lock so multiple threads won't enter a race condition while
registering/unregistering eventfd.
With the above approach ring quiesce can be avoided which is much more
expensive then using RCU lock. On the system tested, io_uring_register
with IORING_REGISTER_EVENTFD takes less than 1ms with RCU lock, compared
to 15ms before with ring quiesce.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-3-usama.arif@bytedance.com
[axboe: long line fixups]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The information on whether eventfd is registered is not very useful and
would result in the tracepoint being enclosed in an rcu_readlock in a
later patch that tries to avoid ring quiesce for registering eventfd.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Link: https://lore.kernel.org/r/20220204145117.1186568-2-usama.arif@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Bd5z
-----END PGP SIGNATURE-----
Merge tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for various problems that have user visible effects
or seem to be urgent:
- fix corruption when combining DIO and non-blocking io_uring over
multiple extents (seen on MariaDB)
- fix relocation crash due to premature return from commit
- fix quota deadlock between rescan and qgroup removal
- fix item data bounds checks in tree-checker (found on a fuzzed
image)
- fix fsync of prealloc extents after EOF
- add missing run of delayed items after unlink during log replay
- don't start relocation until snapshot drop is finished
- fix reversed condition for subpage writers locking
- fix warning on page error"
* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fallback to blocking mode when doing async dio over multiple extents
btrfs: add missing run of delayed items after unlink during log replay
btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
btrfs: do not start relocation until in progress drops are done
btrfs: tree-checker: use u64 for item data end to avoid overflow
btrfs: do not WARN_ON() if we have PageError set
btrfs: fix lost prealloc extents beyond eof after full fsync
btrfs: subpage: fix a wrong check on subpage->writers
Since bit 57 was exported for uffd-wp write-protected (commit
fb8e37f35a2f: "mm/pagemap: export uffd-wp protection information"),
fixing it can reduce some unnecessary confusion.
Link: https://lkml.kernel.org/r/20220301044538.3042713-1-yun.zhou@windriver.com
Fixes: fb8e37f35a2fe1 ("mm/pagemap: export uffd-wp protection information")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Cc: Florian Schmidt <florian.schmidt@nutanix.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Colin Cross <ccross@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some users recently reported that MariaDB was getting a read corruption
when using io_uring on top of btrfs. This started to happen in 5.16,
after commit 51bd9563b6783d ("btrfs: fix deadlock due to page faults
during direct IO reads and writes"). That changed btrfs to use the new
iomap flag IOMAP_DIO_PARTIAL and to disable page faults before calling
iomap_dio_rw(). This was necessary to fix deadlocks when the iovector
corresponds to a memory mapped file region. That type of scenario is
exercised by test case generic/647 from fstests.
For this MariaDB scenario, we attempt to read 16K from file offset X
using IOCB_NOWAIT and io_uring. In that range we have 4 extents, each
with a size of 4K, and what happens is the following:
1) btrfs_direct_read() disables page faults and calls iomap_dio_rw();
2) iomap creates a struct iomap_dio object, its reference count is
initialized to 1 and its ->size field is initialized to 0;
3) iomap calls btrfs_dio_iomap_begin() with file offset X, which finds
the first 4K extent, and setups an iomap for this extent consisting
of a single page;
4) At iomap_dio_bio_iter(), we are able to access the first page of the
buffer (struct iov_iter) with bio_iov_iter_get_pages() without
triggering a page fault;
5) iomap submits a bio for this 4K extent
(iomap_dio_submit_bio() -> btrfs_submit_direct()) and increments
the refcount on the struct iomap_dio object to 2; The ->size field
of the struct iomap_dio object is incremented to 4K;
6) iomap calls btrfs_iomap_begin() again, this time with a file
offset of X + 4K. There we setup an iomap for the next extent
that also has a size of 4K;
7) Then at iomap_dio_bio_iter() we call bio_iov_iter_get_pages(),
which tries to access the next page (2nd page) of the buffer.
This triggers a page fault and returns -EFAULT;
8) At __iomap_dio_rw() we see the -EFAULT, but we reset the error
to 0 because we passed the flag IOMAP_DIO_PARTIAL to iomap and
the struct iomap_dio object has a ->size value of 4K (we submitted
a bio for an extent already). The 'wait_for_completion' variable
is not set to true, because our iocb has IOCB_NOWAIT set;
9) At the bottom of __iomap_dio_rw(), we decrement the reference count
of the struct iomap_dio object from 2 to 1. Because we were not
the only ones holding a reference on it and 'wait_for_completion' is
set to false, -EIOCBQUEUED is returned to btrfs_direct_read(), which
just returns it up the callchain, up to io_uring;
10) The bio submitted for the first extent (step 5) completes and its
bio endio function, iomap_dio_bio_end_io(), decrements the last
reference on the struct iomap_dio object, resulting in calling
iomap_dio_complete_work() -> iomap_dio_complete().
11) At iomap_dio_complete() we adjust the iocb->ki_pos from X to X + 4K
and return 4K (the amount of io done) to iomap_dio_complete_work();
12) iomap_dio_complete_work() calls the iocb completion callback,
iocb->ki_complete() with a second argument value of 4K (total io
done) and the iocb with the adjust ki_pos of X + 4K. This results
in completing the read request for io_uring, leaving it with a
result of 4K bytes read, and only the first page of the buffer
filled in, while the remaining 3 pages, corresponding to the other
3 extents, were not filled;
13) For the application, the result is unexpected because if we ask
to read N bytes, it expects to get N bytes read as long as those
N bytes don't cross the EOF (i_size).
MariaDB reports this as an error, as it's not expecting a short read,
since it knows it's asking for read operations fully within the i_size
boundary. This is typical in many applications, but it may also be
questionable if they should react to such short reads by issuing more
read calls to get the remaining data. Nevertheless, the short read
happened due to a change in btrfs regarding how it deals with page
faults while in the middle of a read operation, and there's no reason
why btrfs can't have the previous behaviour of returning the whole data
that was requested by the application.
The problem can also be triggered with the following simple program:
/* Get O_DIRECT */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <liburing.h>
int main(int argc, char *argv[])
{
char *foo_path;
struct io_uring ring;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec iovec;
int fd;
long pagesize;
void *write_buf;
void *read_buf;
ssize_t ret;
int i;
if (argc != 2) {
fprintf(stderr, "Use: %s <directory>\n", argv[0]);
return 1;
}
foo_path = malloc(strlen(argv[1]) + 5);
if (!foo_path) {
fprintf(stderr, "Failed to allocate memory for file path\n");
return 1;
}
strcpy(foo_path, argv[1]);
strcat(foo_path, "/foo");
/*
* Create file foo with 2 extents, each with a size matching
* the page size. Then allocate a buffer to read both extents
* with io_uring, using O_DIRECT and IOCB_NOWAIT. Before doing
* the read with io_uring, access the first page of the buffer
* to fault it in, so that during the read we only trigger a
* page fault when accessing the second page of the buffer.
*/
fd = open(foo_path, O_CREAT | O_TRUNC | O_WRONLY |
O_DIRECT, 0666);
if (fd == -1) {
fprintf(stderr,
"Failed to create file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
ret = posix_memalign(&write_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate write buffer\n");
return 1;
}
memset(write_buf, 0xab, pagesize);
memset(write_buf + pagesize, 0xcd, pagesize);
/* Create 2 extents, each with a size matching page size. */
for (i = 0; i < 2; i++) {
ret = pwrite(fd, write_buf + i * pagesize, pagesize,
i * pagesize);
if (ret != pagesize) {
fprintf(stderr,
"Failed to write to file, ret = %ld errno %d (%s)\n",
ret, errno, strerror(errno));
return 1;
}
ret = fsync(fd);
if (ret != 0) {
fprintf(stderr, "Failed to fsync file\n");
return 1;
}
}
close(fd);
fd = open(foo_path, O_RDONLY | O_DIRECT);
if (fd == -1) {
fprintf(stderr,
"Failed to open file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
ret = posix_memalign(&read_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate read buffer\n");
return 1;
}
/*
* Fault in only the first page of the read buffer.
* We want to trigger a page fault for the 2nd page of the
* read buffer during the read operation with io_uring
* (O_DIRECT and IOCB_NOWAIT).
*/
memset(read_buf, 0, 1);
ret = io_uring_queue_init(1, &ring, 0);
if (ret != 0) {
fprintf(stderr, "Failed to create io_uring queue\n");
return 1;
}
sqe = io_uring_get_sqe(&ring);
if (!sqe) {
fprintf(stderr, "Failed to get io_uring sqe\n");
return 1;
}
iovec.iov_base = read_buf;
iovec.iov_len = 2 * pagesize;
io_uring_prep_readv(sqe, fd, &iovec, 1, 0);
ret = io_uring_submit_and_wait(&ring, 1);
if (ret != 1) {
fprintf(stderr,
"Failed at io_uring_submit_and_wait()\n");
return 1;
}
ret = io_uring_wait_cqe(&ring, &cqe);
if (ret < 0) {
fprintf(stderr, "Failed at io_uring_wait_cqe()\n");
return 1;
}
printf("io_uring read result for file foo:\n\n");
printf(" cqe->res == %d (expected %d)\n", cqe->res, 2 * pagesize);
printf(" memcmp(read_buf, write_buf) == %d (expected 0)\n",
memcmp(read_buf, write_buf, 2 * pagesize));
io_uring_cqe_seen(&ring, cqe);
io_uring_queue_exit(&ring);
return 0;
}
When running it on an unpatched kernel:
$ gcc io_uring_test.c -luring
$ mkfs.btrfs -f /dev/sda
$ mount /dev/sda /mnt/sda
$ ./a.out /mnt/sda
io_uring read result for file foo:
cqe->res == 4096 (expected 8192)
memcmp(read_buf, write_buf) == -205 (expected 0)
After this patch, the read always returns 8192 bytes, with the buffer
filled with the correct data. Although that reproducer always triggers
the bug in my test vms, it's possible that it will not be so reliable
on other environments, as that can happen if the bio for the first
extent completes and decrements the reference on the struct iomap_dio
object before we do the atomic_dec_and_test() on the reference at
__iomap_dio_rw().
Fix this in btrfs by having btrfs_dio_iomap_begin() return -EAGAIN
whenever we try to satisfy a non blocking IO request (IOMAP_NOWAIT flag
set) over a range that spans multiple extents (or a mix of extents and
holes). This avoids returning success to the caller when we only did
partial IO, which is not optimal for writes and for reads it's actually
incorrect, as the caller doesn't expect to get less bytes read than it has
requested (unless EOF is crossed), as previously mentioned. This is also
the type of behaviour that xfs follows (xfs_direct_write_iomap_begin()),
even though it doesn't use IOMAP_DIO_PARTIAL.
A test case for fstests will follow soon.
Link: https://lore.kernel.org/linux-btrfs/CABVffEM0eEWho+206m470rtM0d9J8ue85TtR-A_oVTuGLWFicA@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/CAHF2GV6U32gmqSjLe=XKgfcZAmLCiH26cJ2OnHGp5x=VAH4OHQ@mail.gmail.com/
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When cachefiles_shorten_object() calls fallocate() to shape the cache
file to match the DIO size, it passes the total file size it wants to
achieve, not the amount of zeros that should be inserted. Since this is
meant to preallocate that amount of storage for the file, it can cause
the cache to fill up the disk and hit ENOSPC.
Fix this by passing the length actually required to go from the current
EOF to the desired EOF.
Fixes: 7623ed6772de ("cachefiles: Implement cookie resize for truncate")
Reported-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/164630854858.3665356.17419701804248490708.stgit@warthog.procyon.org.uk # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix ztailpacking z_idataoff getting trimmed on > 4GiB filesystems.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYh98dxEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBJ5NAQDb7o+5L9lnmxyVnx4UvPnj4k0JKnNEqO7Q
iCuVn31XQAD/Six/UARs13Tbvinvoigb1CWxSrLhh3QDumWwDl8l7Ak=
=906m
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.17-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"A one-line patch to fix the new ztailpacking feature on > 4GiB
filesystems because z_idataoff can get trimmed improperly.
ztailpacking is still a brand new EXPERIMENTAL feature, but it'd be
better to fix the issue as soon as possible to avoid unnecessary
backporting.
Summary:
- Fix ztailpacking z_idataoff getting trimmed on > 4GiB filesystems"
* tag 'erofs-for-5.17-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix ztailpacking on > 4GiB filesystems
During log replay, whenever we need to check if a name (dentry) exists in
a directory we do searches on the subvolume tree for inode references or
or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY
keys as well, before kernel 5.17). However when during log replay we
unlink a name, through btrfs_unlink_inode(), we may not delete inode
references and dir index keys from a subvolume tree and instead just add
the deletions to the delayed inode's delayed items, which will only be
run when we commit the transaction used for log replay. This means that
after an unlink operation during log replay, if we attempt to search for
the same name during log replay, we will not see that the name was already
deleted, since the deletion is recorded only on the delayed items.
We run delayed items after every unlink operation during log replay,
except at unlink_old_inode_refs() and at add_inode_ref(). This was due
to an overlook, as delayed items should be run after evert unlink, for
the reasons stated above.
So fix those two cases.
Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation")
Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit e804861bd4e6 ("btrfs: fix deadlock between quota disable and
qgroup rescan worker") by Kawasaki resolves deadlock between quota
disable and qgroup rescan worker. But also there is a deadlock case like
it. It's about enabling or disabling quota and creating or removing
qgroup. It can be reproduced in simple script below.
for i in {1..100}
do
btrfs quota enable /mnt &
btrfs qgroup create 1/0 /mnt &
btrfs qgroup destroy 1/0 /mnt &
btrfs quota disable /mnt &
done
Here's why the deadlock happens:
1) The quota rescan task is running.
2) Task A calls btrfs_quota_disable(), locks the qgroup_ioctl_lock
mutex, and then calls btrfs_qgroup_wait_for_completion(), to wait for
the quota rescan task to complete.
3) Task B calls btrfs_remove_qgroup() and it blocks when trying to lock
the qgroup_ioctl_lock mutex, because it's being held by task A. At that
point task B is holding a transaction handle for the current transaction.
4) The quota rescan task calls btrfs_commit_transaction(). This results
in it waiting for all other tasks to release their handles on the
transaction, but task B is blocked on the qgroup_ioctl_lock mutex
while holding a handle on the transaction, and that mutex is being held
by task A, which is waiting for the quota rescan task to complete,
resulting in a deadlock between these 3 tasks.
To resolve this issue, the thread disabling quota should unlock
qgroup_ioctl_lock before waiting rescan completion. Move
btrfs_qgroup_wait_for_completion() after unlock of qgroup_ioctl_lock.
Fixes: e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit a bug with a recovering relocation on mount for one of our file
systems in production. I reproduced this locally by injecting errors
into snapshot delete with balance running at the same time. This
presented as an error while looking up an extent item
WARNING: CPU: 5 PID: 1501 at fs/btrfs/extent-tree.c:866 lookup_inline_extent_backref+0x647/0x680
CPU: 5 PID: 1501 Comm: btrfs-balance Not tainted 5.16.0-rc8+ #8
RIP: 0010:lookup_inline_extent_backref+0x647/0x680
RSP: 0018:ffffae0a023ab960 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000000000
RBP: ffff943fd2a39b60 R08: 0000000000000000 R09: 0000000000000001
R10: 0001434088152de0 R11: 0000000000000000 R12: 0000000001d05000
R13: ffff943fd2a39b60 R14: ffff943fdb96f2a0 R15: ffff9442fc923000
FS: 0000000000000000(0000) GS:ffff944e9eb40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1157b1fca8 CR3: 000000010f092000 CR4: 0000000000350ee0
Call Trace:
<TASK>
insert_inline_extent_backref+0x46/0xd0
__btrfs_inc_extent_ref.isra.0+0x5f/0x200
? btrfs_merge_delayed_refs+0x164/0x190
__btrfs_run_delayed_refs+0x561/0xfa0
? btrfs_search_slot+0x7b4/0xb30
? btrfs_update_root+0x1a9/0x2c0
btrfs_run_delayed_refs+0x73/0x1f0
? btrfs_update_root+0x1a9/0x2c0
btrfs_commit_transaction+0x50/0xa50
? btrfs_update_reloc_root+0x122/0x220
prepare_to_merge+0x29f/0x320
relocate_block_group+0x2b8/0x550
btrfs_relocate_block_group+0x1a6/0x350
btrfs_relocate_chunk+0x27/0xe0
btrfs_balance+0x777/0xe60
balance_kthread+0x35/0x50
? btrfs_balance+0xe60/0xe60
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Normally snapshot deletion and relocation are excluded from running at
the same time by the fs_info->cleaner_mutex. However if we had a
pending balance waiting to get the ->cleaner_mutex, and a snapshot
deletion was running, and then the box crashed, we would come up in a
state where we have a half deleted snapshot.
Again, in the normal case the snapshot deletion needs to complete before
relocation can start, but in this case relocation could very well start
before the snapshot deletion completes, as we simply add the root to the
dead roots list and wait for the next time the cleaner runs to clean up
the snapshot.
Fix this by setting a bit on the fs_info if we have any DEAD_ROOT's that
had a pending drop_progress key. If they do then we know we were in the
middle of the drop operation and set a flag on the fs_info. Then
balance can wait until this flag is cleared to start up again.
If there are DEAD_ROOT's that don't have a drop_progress set then we're
safe to start balance right away as we'll be properly protected by the
cleaner_mutex.
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
User reported there is an array-index-out-of-bounds access while
mounting the crafted image:
[350.411942 ] loop0: detected capacity change from 0 to 262144
[350.427058 ] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 8 /dev/loop0 scanned by systemd-udevd (1044)
[350.428564 ] BTRFS info (device loop0): disk space caching is enabled
[350.428568 ] BTRFS info (device loop0): has skinny extents
[350.429589 ]
[350.429619 ] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1
[350.429636 ] index 1048096 is out of range for type 'page *[16]'
[350.429650 ] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4
[350.429652 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[350.429653 ] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs]
[350.429772 ] Call Trace:
[350.429774 ] <TASK>
[350.429776 ] dump_stack_lvl+0x47/0x5c
[350.429780 ] ubsan_epilogue+0x5/0x50
[350.429786 ] __ubsan_handle_out_of_bounds+0x66/0x70
[350.429791 ] btrfs_get_16+0xfd/0x120 [btrfs]
[350.429832 ] check_leaf+0x754/0x1a40 [btrfs]
[350.429874 ] ? filemap_read+0x34a/0x390
[350.429878 ] ? load_balance+0x175/0xfc0
[350.429881 ] validate_extent_buffer+0x244/0x310 [btrfs]
[350.429911 ] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs]
[350.429935 ] end_bio_extent_readpage+0x3af/0x850 [btrfs]
[350.429969 ] ? newidle_balance+0x259/0x480
[350.429972 ] end_workqueue_fn+0x29/0x40 [btrfs]
[350.429995 ] btrfs_work_helper+0x71/0x330 [btrfs]
[350.430030 ] ? __schedule+0x2fb/0xa40
[350.430033 ] process_one_work+0x1f6/0x400
[350.430035 ] ? process_one_work+0x400/0x400
[350.430036 ] worker_thread+0x2d/0x3d0
[350.430037 ] ? process_one_work+0x400/0x400
[350.430038 ] kthread+0x165/0x190
[350.430041 ] ? set_kthread_struct+0x40/0x40
[350.430043 ] ret_from_fork+0x1f/0x30
[350.430047 ] </TASK>
[350.430047 ]
[350.430077 ] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2
btrfs check reports:
corrupt leaf: root=3 block=20975616 physical=20975616 slot=1, unexpected
item end, have 4294971193 expect 3897
The first slot item offset is 4293005033 and the size is 1966160.
In check_leaf, we use btrfs_item_end() to check item boundary versus
extent_buffer data size. However, return type of btrfs_item_end() is u32.
(u32)(4293005033 + 1966160) == 3897, overflow happens and the result 3897
equals to leaf data size reasonably.
Fix it by use u64 variable to store item data end in check_leaf() to
avoid u32 overflow.
This commit does solve the invalid memory access showed by the stack
trace. However, its metadata profile is DUP and another copy of the
leaf is fine. So the image can be mounted successfully. But when umount
is called, the ASSERT btrfs_mark_buffer_dirty() will be triggered
because the only node in extent tree has 0 item and invalid owner. It's
solved by another commit
"btrfs: check extent buffer owner against the owner rootid".
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we do any extent buffer operations we call
assert_eb_page_uptodate() to complain loudly if we're operating on an
non-uptodate page. Our overnight tests caught this warning earlier this
week
WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50
CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246
RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000
RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0
RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000
R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1
R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000
FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0
Call Trace:
extent_buffer_test_bit+0x3f/0x70
free_space_test_bit+0xa6/0xc0
load_free_space_tree+0x1f6/0x470
caching_thread+0x454/0x630
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? lock_release+0x1f0/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_release+0x1f0/0x2d0
? finish_task_switch.isra.0+0xf9/0x3a0
process_one_work+0x26d/0x580
? process_one_work+0x580/0x580
worker_thread+0x55/0x3b0
? process_one_work+0x580/0x580
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer
uptodate when we fail to write it"), however all that fix did was keep
us from finding extent buffers after a failed writeout. It didn't keep
us from continuing to use a buffer that we already had found.
In this case we're searching the commit root to cache the block group,
so we can start committing the transaction and switch the commit root
and then start writing. After the switch we can look up an extent
buffer that hasn't been written yet and start processing that block
group. Then we fail to write that block out and clear Uptodate on the
page, and then we start spewing these errors.
Normally we're protected by the tree lock to a certain degree here. If
we read a block we have that block read locked, and we block the writer
from locking the block before we submit it for the write. However this
isn't necessarily fool proof because the read could happen before we do
the submit_bio and after we locked and unlocked the extent buffer.
Also in this particular case we have path->skip_locking set, so that
won't save us here. We'll simply get a block that was valid when we
read it, but became invalid while we were using it.
What we really want is to catch the case where we've "read" a block but
it's not marked Uptodate. On read we ClearPageError(), so if we're
!Uptodate and !Error we know we didn't do the right thing for reading
the page.
Fix this by checking !Uptodate && !Error, this way we will not complain
if our buffer gets invalidated while we're using it, and we'll maintain
the spirit of the check which is to make sure we have a fully in-cache
block while we're messing with it.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a full fsync, if we have prealloc extents beyond (or at) eof,
and the leaves that contain them were not modified in the current
transaction, we end up not logging them. This results in losing those
extents when we replay the log after a power failure, since the inode is
truncated to the current value of the logged i_size.
Just like for the fast fsync path, we need to always log all prealloc
extents starting at or beyond i_size. The fast fsync case was fixed in
commit 471d557afed155 ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay") but it missed the full fsync path. The problem
exists since the very early days, when the log tree was added by
commit e02119d5a7b439 ("Btrfs: Add a write ahead tree log to optimize
synchronous operations").
Example reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
# Create our test file with many file extent items, so that they span
# several leaves of metadata, even if the node/page size is 64K. Use
# direct IO and not fsync/O_SYNC because it's both faster and it avoids
# clearing the full sync flag from the inode - we want the fsync below
# to trigger the slow full sync code path.
$ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo
# Now add two preallocated extents to our file without extending the
# file's size. One right at i_size, and another further beyond, leaving
# a gap between the two prealloc extents.
$ xfs_io -c "falloc -k 16M 1M" /mnt/foo
$ xfs_io -c "falloc -k 20M 1M" /mnt/foo
# Make sure everything is durably persisted and the transaction is
# committed. This makes all created extents to have a generation lower
# than the generation of the transaction used by the next write and
# fsync.
sync
# Now overwrite only the first extent, which will result in modifying
# only the first leaf of metadata for our inode. Then fsync it. This
# fsync will use the slow code path (inode full sync bit is set) because
# it's the first fsync since the inode was created/loaded.
$ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo
# Extent list before power failure.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x0
3: [32768..34815]: 2172928..2174975 2048 0x800
4: [34816..40959]: hole 6144
5: [40960..43007]: 2174976..2177023 2048 0x801
<power fail>
# Mount fs again, trigger log replay.
$ mount /dev/sdc /mnt
# Extent list after power failure and log replay.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x1
# The prealloc extents at file offsets 16M and 20M are missing.
So fix this by calling btrfs_log_prealloc_extents() when we are doing a
full fsync, so that we always log all prealloc extents beyond eof.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When looping btrfs/074 with 64K page size and 4K sectorsize, there is a
low chance (1/50~1/100) to crash with the following ASSERT() triggered
in btrfs_subpage_start_writer():
ret = atomic_add_return(nbits, &subpage->writers);
ASSERT(ret == nbits); <<< This one <<<
[CAUSE]
With more debugging output on the parameters of
btrfs_subpage_start_writer(), it shows a very concerning error:
ret=29 nbits=13 start=393216 len=53248
For @nbits it's correct, but @ret which is the returned value from
atomic_add_return(), it's not only larger than nbits, but also larger
than max sectors per page value (for 64K page size and 4K sector size,
it's 16).
This indicates that some call sites are not properly decreasing the value.
And that's exactly the case, in btrfs_page_unlock_writer(), due to the
fact that we can have page locked either by lock_page() or
process_one_page(), we have to check if the subpage has any writer.
If no writers, it's locked by lock_page() and we only need to unlock it.
But unfortunately the check for the writers are completely opposite:
if (atomic_read(&subpage->writers))
/* No writers, locked by plain lock_page() */
return unlock_page(page);
We directly unlock the page if it has writers, which is the completely
opposite what we want.
Thankfully the affected call site is only limited to
extent_write_locked_range(), so it's mostly affecting compressed write.
[FIX]
Just fix the wrong check condition to fix the bug.
Fixes: e55a0de18572 ("btrfs: rework page locking in __extent_writepage()")
CC: stable@vger.kernel.org # 5.16
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
z_idataoff here is an absolute physical offset, so it should use
erofs_off_t (64 bits at least). Otherwise, it'll get trimmed and
cause the decompresion failure.
Link: https://lore.kernel.org/r/20220222033118.20540-1-hsiangkao@linux.alibaba.com
Fixes: ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support")
Reviewed-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Partially revert commit 5f501d555653 ("binfmt_elf: reintroduce using
MAP_FIXED_NOREPLACE"), which applied the ET_DYN "total_mapping_size"
logic also to ET_EXEC.
At least ia64 has ET_EXEC PT_LOAD segments that are not virtual-address
contiguous (but _are_ file-offset contiguous). This would result in a
giant mapping attempting to cover the entire span, including the virtual
address range hole, and well beyond the size of the ELF file itself,
causing the kernel to refuse to load it. For example:
$ readelf -lW /usr/bin/gcc
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz ...
...
LOAD 0x000000 0x4000000000000000 0x4000000000000000 0x00b5a0 0x00b5a0 ...
LOAD 0x00b5a0 0x600000000000b5a0 0x600000000000b5a0 0x0005ac 0x000710 ...
...
^^^^^^^^ ^^^^^^^^^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
File offset range : 0x000000-0x00bb4c
0x00bb4c bytes
Virtual address range : 0x4000000000000000-0x600000000000bcb0
0x200000000000bcb0 bytes
Remove the total_mapping_size logic for ET_EXEC, which reduces the
ET_EXEC MAP_FIXED_NOREPLACE coverage to only the first PT_LOAD (better
than nothing), and retains it for ET_DYN.
Ironically, this is the reverse of the problem that originally caused
problems with MAP_FIXED_NOREPLACE: overlapping PT_LOAD segments. Future
work could restore full coverage if load_elf_binary() were to perform
mappings in a separate phase from the loading (where it could resolve
both overlaps and holes).
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Reported-by: matoro <matoro_bugzilla_kernel@matoro.tk>
Fixes: 5f501d555653 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE")
Link: https://lore.kernel.org/r/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Link: https://lore.kernel.org/lkml/ce8af9c13bcea9230c7689f3c1e0e2cd@matoro.tk
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/49182d0d-708b-4029-da5f-bc18603440a6@physik.fu-berlin.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- rtla (Real-Time Linux Analysis tool): fix typo in man page
- rtla: Update API -e to -E before it is released
- rlla: Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYho7XBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiOhAQDbCbEjIYwkGCpckuGgSQiMU4bAWUzk
jCz9PoaTxoIWJwEAsLWrAPb0pDzNwdEKjiC3fJoUJhz3NwlEjJ7hQ3BxzAI=
=iXOQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmIEnhUACgkQ+H93GTRK
tOsn7g//e3R/lqpkx6jJtg6SqiC1KiI9euwD0wBdIvrCWSJZ6IdjOSvfRRG13vN0
S1spU0joiLLlVhzLIQdysgZkRub57P0mRmq3zVpHYxMOWKBvPH1OmZtdu83HOiAv
/zjy3tNFc/1ZaqHudAZv3+4780qMZtQTmL7DbgLnvFspCBf4PdBlT0d7Wbf982w8
dMWF7Pla8DhLVFbMsGdyXlnGROz+pw3jofVwY9P6f+PaY37mo+lZu65GrTlNecnc
QfTyX45VAWFO/XZtXm7pXCr8211eK2SnrOFZXZH9u3qxSD5vo1NWf9KPKVkYxc8/
7icz+Yp5t61HQg3o0z7cNAQZp7CQl0BWz6gp2YXMWHS3ZJMnd6H4zTDBdV2MSA5/
alT4kcwncRVcmHtFET7JAsnQkWNeREBqhqCRoAf8hW8uxpjkXw6sPop7+hbZtoJw
VAp1TxbEMbPGTZb76Kw4nZt1eZ3SyJOl6ByzsJMxekEFiMYVh4yxO+a3Q6KNOkMM
O62JpzdE1EeFgV7qmoZ8QzCZuD7z7KC99iv5QtyacFITCqv5y0h/RLGCsOwJ0EMc
fJGKN7uQOZrBIJYInx53S7fCYGGMm0+HUUXMUatBe4RK3dADyqapLzQb0tCGamAf
NQra6NotwfNq8SN+Sn17PJ1KifSRKfw6l7Q+6pt9LA2eVbr2jV4=
=6ODm
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
