Commit Graph

207 Commits

Author SHA1 Message Date
Thomas Gleixner
ce0d3c0a6f genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
Boris reported that the sparse_irq protection around __cpu_up() in the
generic code causes a regression on Xen. Xen allocates interrupts and
some more in the xen_cpu_up() function, so it deadlocks on the
sparse_irq_lock.

There is no simple fix for this and we really should have the
protection for all architectures, but for now the only solution is to
move it to x86 where actual wreckage due to the lack of protection has
been observed.

Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fixes: a899418167 'hotplug: Prevent alloc/free of irq descriptors during cpu up/down'
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: xen-devel <xen-devel@lists.xenproject.org>
2015-07-15 10:39:17 +02:00
Thomas Gleixner
a899418167 hotplug: Prevent alloc/free of irq descriptors during cpu up/down
When a cpu goes up some architectures (e.g. x86) have to walk the irq
space to set up the vector space for the cpu. While this needs extra
protection at the architecture level we can avoid a few race
conditions by preventing the concurrent allocation/free of irq
descriptors and the associated data.

When a cpu goes down it moves the interrupts which are targeted to
this cpu away by reassigning the affinities. While this happens
interrupts can be allocated and freed, which opens a can of race
conditions in the code which reassignes the affinities because
interrupt descriptors might be freed underneath.

Example:

CPU1				CPU2
cpu_up/down
 irq_desc = irq_to_desc(irq);
				remove_from_radix_tree(desc);
 raw_spin_lock(&desc->lock);
				free(desc);

We could protect the irq descriptors with RCU, but that would require
a full tree change of all accesses to interrupt descriptors. But
fortunately these kind of race conditions are rather limited to a few
things like cpu hotplug. The normal setup/teardown is very well
serialized. So the simpler and obvious solution is:

Prevent allocation and freeing of interrupt descriptors accross cpu
hotplug.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de
2015-07-08 11:32:25 +02:00
Paul Gortmaker
927da9dfd1 cpu: Remove new instance of __cpuinit that crept back in
We removed __cpuinit support (leaving no-op stubs) quite some time ago.
However a new instance was added in commit 00df35f991
("cpu: Defer smpboot kthread unparking until CPU known to scheduler")

Since we want to clobber the stubs soon, get this removed now.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27 12:58:39 -07:00
Paul E. McKenney
64eaf97421 cpu: Handle smpboot_unpark_threads() uniformly
Commit 00df35f991 (cpu: Defer smpboot kthread unparking until CPU known
to scheduler) put the online path's call to smpboot_unpark_threads()
into a CPU-hotplug notifier.  This commit places the offline-failure
paths call into the same notifier for the sake of uniformity.

Note that it is not currently possible to place the offline path's call to
smpboot_park_threads() into an existing notifier because the CPU_DYING
notifiers run in a restricted environment, and the CPU_UP_PREPARE
notifiers run too soon.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27 12:58:39 -07:00
Linus Torvalds
078838d565 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
 "The main changes in this cycle were:

   - changes permitting use of call_rcu() and friends very early in
     boot, for example, before rcu_init() is invoked.

   - add in-kernel API to enable and disable expediting of normal RCU
     grace periods.

   - improve RCU's handling of (hotplug-) outgoing CPUs.

   - NO_HZ_FULL_SYSIDLE fixes.

   - tiny-RCU updates to make it more tiny.

   - documentation updates.

   - miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
  cpu: Defer smpboot kthread unparking until CPU known to scheduler
  rcu: Associate quiescent-state reports with grace period
  rcu: Yet another fix for preemption and CPU hotplug
  rcu: Add diagnostics to grace-period cleanup
  rcutorture: Default to grace-period-initialization delays
  rcu: Handle outgoing CPUs on exit from idle loop
  cpu: Make CPU-offline idle-loop transition point more precise
  rcu: Eliminate ->onoff_mutex from rcu_node structure
  rcu: Process offlining and onlining only at grace-period start
  rcu: Move rcu_report_unblock_qs_rnp() to common code
  rcu: Rework preemptible expedited bitmask handling
  rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
  rcutorture: Enable slow grace-period initializations
  rcu: Provide diagnostic option to slow down grace-period initialization
  rcu: Detect stalls caused by failure to propagate up rcu_node tree
  rcu: Eliminate empty HOTPLUG_CPU ifdef
  rcu: Simplify sync_rcu_preempt_exp_init()
  rcu: Put all orphan-callback-related code under same comment
  rcu: Consolidate offline-CPU callback initialization
  ...
2015-04-14 13:36:04 -07:00
Paul E. McKenney
00df35f991 cpu: Defer smpboot kthread unparking until CPU known to scheduler
Currently, smpboot_unpark_threads() is invoked before the incoming CPU
has been added to the scheduler's runqueue structures.  This might
potentially cause the unparked kthread to run on the wrong CPU, since the
correct CPU isn't fully set up yet.

That causes a sporadic, hard to debug boot crash triggering on some
systems, reported by Borislav Petkov, and bisected down to:

  2a442c9c64 ("x86: Use common outgoing-CPU-notification code")

This patch places smpboot_unpark_threads() in a CPU hotplug
notifier with priority set so that these kthreads are unparked just after
the CPU has been added to the runqueues.

Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-13 08:25:16 +02:00
Thomas Gleixner
a49b116dcb clockevents: Cleanup dead cpu explicitely
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the cleanup function for a dead cpu and invoke it
directly from the cpu down code. Make it conditional on
CPU_HOTPLUG as well.

Temporary change, will be refined in the future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased, added clockevents_notify() removal ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1735025.raBZdQHM3m@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:37 +02:00
Thomas Gleixner
52c063d1ad clockevents: Make tick handover explicit
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the tick_handover call and invoke it explicitely from
the hotplug code. Temporary solution will be cleaned up in later
patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1658173.RkEEILFiQZ@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:36 +02:00
Preeti U Murthy
345527b1ed clockevents: Fix cpu_down() race for hrtimer based broadcasting
It was found when doing a hotplug stress test on POWER, that the
machine either hit softlockups or rcu_sched stall warnings.  The
issue was traced to commit:

  7cba160ad7 ("powernv/cpuidle: Redesign idle states management")

which exposed the cpu_down() race with hrtimer based broadcast mode:

  5d1638acb9 ("tick: Introduce hrtimer based broadcast")

The race is the following:

Assume CPU1 is the CPU which holds the hrtimer broadcasting duty
before it is taken down.

	CPU0					CPU1

	cpu_down()				take_cpu_down()
						disable_interrupts()

	cpu_die()

	while (CPU1 != CPU_DEAD) {
		msleep(100);
		switch_to_idle();
		stop_cpu_timer();
		schedule_broadcast();
	}

	tick_cleanup_cpu_dead()
		take_over_broadcast()

So after CPU1 disabled interrupts it cannot handle the broadcast
hrtimer anymore, so CPU0 will be stuck forever.

Fix this by explicitly taking over broadcast duty before cpu_die().

This is a temporary workaround. What we really want is a callback
in the clockevent device which allows us to do that from the dying
CPU by pushing the hrtimer onto a different cpu. That might involve
an IPI and is definitely more complex than this immediate fix.

Changelog was picked up from:

    https://lkml.org/lkml/2015/2/16/213

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: nicolas.pitre@linaro.org
Cc: peterz@infradead.org
Cc: rjw@rjwysocki.net
Fixes: http://linuxppc.10917.n7.nabble.com/offlining-cpus-breakage-td88619.html
Link: http://lkml.kernel.org/r/20150330092410.24979.59887.stgit@preeti.in.ibm.com
[ Merged it to the latest timer tree, renamed the callback, tidied up the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 14:25:39 +02:00
Paul E. McKenney
528a25b00e cpu: Make CPU-offline idle-loop transition point more precise
This commit uses a per-CPU variable to make the CPU-offline code path
through the idle loop more precise, so that the outgoing CPU is
guaranteed to make it into the idle loop before it is powered off.
This commit is in preparation for putting the RCU offline-handling
code on this code path, which will eliminate the magic one-jiffy
wait that RCU uses as the maximum time for an outgoing CPU to get
all the way through the scheduler.

The magic one-jiffy wait for incoming CPUs remains a separate issue.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-12 15:19:37 -07:00
David Hildenbrand
87af9e7ff9 hotplugcpu: Avoid deadlocks by waking active_writer
Commit b2c4623dcd ("rcu: More on deadlock between CPU hotplug and expedited
grace periods") introduced another problem that can easily be reproduced by
starting/stopping cpus in a loop.

E.g.:
  for i in `seq 5000`; do
      echo 1 > /sys/devices/system/cpu/cpu1/online
      echo 0 > /sys/devices/system/cpu/cpu1/online
  done

Will result in:
  INFO: task /cpu_start_stop:1 blocked for more than 120 seconds.
  Call Trace:
  ([<00000000006a028e>] __schedule+0x406/0x91c)
   [<0000000000130f60>] cpu_hotplug_begin+0xd0/0xd4
   [<0000000000130ff6>] _cpu_up+0x3e/0x1c4
   [<0000000000131232>] cpu_up+0xb6/0xd4
   [<00000000004a5720>] device_online+0x80/0xc0
   [<00000000004a57f0>] online_store+0x90/0xb0
  ...

And a deadlock.

Problem is that if the last ref in put_online_cpus() can't get the
cpu_hotplug.lock the puts_pending count is incremented, but a sleeping
active_writer might never be woken up, therefore never exiting the loop in
cpu_hotplug_begin().

This fix removes puts_pending and turns refcount into an atomic variable. We
also introduce a wait queue for the active_writer, to avoid possible races and
use-after-free. There is no need to take the lock in put_online_cpus() anymore.

Can't reproduce it with this fix.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06 11:01:14 -08:00
Paul E. McKenney
62db99f478 cpu: Avoid puts_pending overflow
A long string of get_online_cpus() with each followed by a
put_online_cpu() that fails to acquire cpu_hotplug.lock can result in
overflow of the cpu_hotplug.puts_pending counter.  Although this is
perhaps improbably, a system with absolutely no CPU-hotplug operations
will have an arbitrarily long time in which this overflow could occur.
This commit therefore adds overflow checks to get_online_cpus() and
try_get_online_cpus().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-11-03 19:21:01 -08:00
Paul E. McKenney
b2c4623dcd rcu: More on deadlock between CPU hotplug and expedited grace periods
Commit dd56af42bd (rcu: Eliminate deadlock between CPU hotplug and
expedited grace periods) was incomplete.  Although it did eliminate
deadlocks involving synchronize_sched_expedited()'s acquisition of
cpu_hotplug.lock via get_online_cpus(), it did nothing about the similar
deadlock involving acquisition of this same lock via put_online_cpus().
This deadlock became apparent with testing involving hibernation.

This commit therefore changes put_online_cpus() acquisition of this lock
to be conditional, and increments a new cpu_hotplug.puts_pending field
in case of acquisition failure.  Then cpu_hotplug_begin() checks for this
new field being non-zero, and applies any changes to cpu_hotplug.refcount.

Reported-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Borislav Petkov <bp@suse.de>
2014-10-23 07:51:17 -07:00
Paul E. McKenney
dd56af42bd rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
Currently, the expedited grace-period primitives do get_online_cpus().
This greatly simplifies their implementation, but means that calls
to them holding locks that are acquired by CPU-hotplug notifiers (to
say nothing of calls to these primitives from CPU-hotplug notifiers)
can deadlock.  But this is starting to become inconvenient, as can be
seen here: https://lkml.org/lkml/2014/8/5/754.  The problem in this
case is that some developers need to acquire a mutex from a CPU-hotplug
notifier, but also need to hold it across a synchronize_rcu_expedited().
As noted above, this currently results in deadlock.

This commit avoids the deadlock and retains the simplicity by creating
a try_get_online_cpus(), which returns false if the get_online_cpus()
reference count could not immediately be incremented.  If a call to
try_get_online_cpus() returns true, the expedited primitives operate as
before.  If a call returns false, the expedited primitives fall back to
normal grace-period operations.  This falling back of course results in
increased grace-period latency, but only during times when CPU hotplug
operations are actually in flight.  The effect should therefore be
negligible during normal operation.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Tested-by: Lan Tianyu <tianyu.lan@intel.com>
2014-09-18 16:22:27 -07:00
Kirill Tkhai
b728ca0602 sched: Rework check_for_tasks()
1) Iterate thru all of threads in the system.
   Check for all threads, not only for group leaders.

2) Check for p->on_rq instead of p->state and cputime.
   Preempted task in !TASK_RUNNING state  OR just
   created task may be queued, that we want to be
   reported too.

3) Use read_lock() instead of write_lock().
   This function does not change any structures, and
   read_lock() is enough.

Signed-off-by: Kirill Tkhai <ktkhai@parallels.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Konstantin Khorenko <khorenko@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Turner <pjt@google.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Todd E Brandt <todd.e.brandt@linux.intel.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403684395.3462.44.camel@tkhai
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-05 11:17:45 +02:00
Linus Torvalds
19c1940fea More ACPI and power management updates for 3.16-rc1
- I didn't remember correctly that the Hans de Goede's ACPI video
    patches actually didn't flip the video.use_native_backlight
    default, although we had discussed that and decided to do that.
    Since I said we would do that in the previous PM+ACPI pull
    request, make that change for real now.
 
  - ACPI bus check notifications for PCI host bridges don't cause
    the bus below the host bridge to be checked for changes as they
    should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
    subsystem that forgets to add hotplug contexts to PCI host bridge
    ACPI device objects.  Create hotplug contexts for PCI host bridges
    too as appropriate.
 
  - Revert recent cpufreq commit related to the big.LITTLE cpufreq
    driver that breaks arm64 builds.
 
  - Fix for a regression in the ppc-corenet cpufreq driver introduced
    during the 3.15 cycle and causing the driver to use the remainder
    from do_div instead of the quotient.  From Ed Swarthout.
 
  - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
    systems where the ACPI reset register is located in memory address
    space.  Fix from Randy Wright.
 
  - Fix for a problem with cpufreq governors that decisions made by
    them may be suboptimal due to the fact that deferrable timers are
    used by them for CPU load sampling.  From Srivatsa S Bhat.
 
  - Fix for a problem with the Tegra cpufreq driver where the CPU
    frequency is temporarily switched to a "stable" level that
    is different from both the initial and target frequencies
    during transitions which causes udelay() to expire earlier than
    it should sometimes.  From Viresh Kumar.
 
  - New trace points and rework of some existing trace points for
    system suspend/resume profiling from Todd Brandt.
 
  - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
    Viresh Kumar.
 
  - Copyright notice update for suspend-and-cpuhotplug.txt from
    Srivatsa S Bhat.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTmeBNAAoJEILEb/54YlRxFo0QAIfp74wZO9ZPcrR+6IO1AEUb
 1qcVJYMFWvisG2JO9b7DUtxwgWHk8/NMgKv+bYxUAEni95mY7PqDTdJ+Qjk7DinJ
 jVo+mzooaQg+KYGQ503YOtqsGhNFM3lE6Jw01wbLytTCetkNCkTgr//7btBbyRKn
 13Ut3o2vH9n5EMoe1jql96onJH6AfBDEn7jc5Sk4rGL7MtKAMsWNTNSGVyLFA98l
 sghO8ZR0AqnBzoedr1eBxzo6ujUqjfYlIcxowZycpJJVX02eN+KGUbOJao2+6RB+
 J6wu/FoPv2VtJkNwSB8IMgZfqceecSIXeWBG5xC22cYbSQ/IDW2k72V+kLHUqd36
 LhlYLIsIxJQovqOgPdKeP5o6OVFd4EheWBiCfNBrmYU+x2av6I6ZjTscz3Robaxh
 AVG6yU8XR2GOpoVGW/+L7R2jZ1Qse1Io0r93hXvCsSXgMkq9HbueX3mZR605msfe
 liDk+fym357cKQUreSH1XF0Q79C1wpEJ6rTz0Qi6ZxkKB+dAYE3oPA+V0+cWSxbK
 WqaFjQwPtvrrduvLj5Z+qF/zRu4LXdTxiY59utBek/RoN6zUsMMpwsRCCdBfub2O
 alBOHUPRaiUywkQtqu7yP9j7iciNxEn1/tXo97b/1qC3RrOwLWOgd8dhpWe0i0Gp
 EmQkie8qCHXw5vCpaeUK
 =0lht
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are fixups on top of the previous PM+ACPI pull request,
  regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
  (ACPI reset, cpufreq), new PM trace points for system suspend
  profiling and a copyright notice update.

  Specifics:

   - I didn't remember correctly that the Hans de Goede's ACPI video
     patches actually didn't flip the video.use_native_backlight
     default, although we had discussed that and decided to do that.
     Since I said we would do that in the previous PM+ACPI pull request,
     make that change for real now.

   - ACPI bus check notifications for PCI host bridges don't cause the
     bus below the host bridge to be checked for changes as they should
     because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
     subsystem that forgets to add hotplug contexts to PCI host bridge
     ACPI device objects.  Create hotplug contexts for PCI host bridges
     too as appropriate.

   - Revert recent cpufreq commit related to the big.LITTLE cpufreq
     driver that breaks arm64 builds.

   - Fix for a regression in the ppc-corenet cpufreq driver introduced
     during the 3.15 cycle and causing the driver to use the remainder
     from do_div instead of the quotient.  From Ed Swarthout.

   - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
     systems where the ACPI reset register is located in memory address
     space.  Fix from Randy Wright.

   - Fix for a problem with cpufreq governors that decisions made by
     them may be suboptimal due to the fact that deferrable timers are
     used by them for CPU load sampling.  From Srivatsa S Bhat.

   - Fix for a problem with the Tegra cpufreq driver where the CPU
     frequency is temporarily switched to a "stable" level that is
     different from both the initial and target frequencies during
     transitions which causes udelay() to expire earlier than it should
     sometimes.  From Viresh Kumar.

   - New trace points and rework of some existing trace points for
     system suspend/resume profiling from Todd Brandt.

   - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
     Viresh Kumar.

   - Copyright notice update for suspend-and-cpuhotplug.txt from
     Srivatsa S Bhat"

* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
  PM / sleep: trace events for device PM callbacks
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  PM / sleep: trace events for suspend/resume
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies
  ACPI / video: Change the default for video.use_native_backlight to 1
  ACPI: Fix bug when ACPI reset register is implemented in system memory
2014-06-12 13:14:19 -07:00
Rafael J. Wysocki
d715a226b0 Merge branch 'pm-sleep'
* pm-sleep:
  PM / sleep: trace events for device PM callbacks
  PM / sleep: trace events for suspend/resume
2014-06-12 13:43:08 +02:00
Todd E Brandt
bb3632c610 PM / sleep: trace events for suspend/resume
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.

The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).

The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-07 00:18:07 +02:00
Fabian Frederick
84117da5b7 kernel/cpu.c: convert printk to pr_foo()
no level printk converted to pr_warn (if err)
no level printk converted to pr_info (disabling non-boot cpus)
Other printk converted to respective level.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:14 -07:00
Lai Jiangshan
6acbfb9697 sched: Fix hotplug vs. set_cpus_allowed_ptr()
Lai found that:

  WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b()
  ...
  migration_cpu_stop+0x1d/0x22

was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is
always a sub-set of cpu_online_mask.

This isn't true since 5fbd036b55 ("sched: Cleanup cpu_active madness").

So set active and online at the same time to avoid this particular
problem.

Fixes: 5fbd036b55 ("sched: Cleanup cpu_active madness")
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-22 10:21:31 +02:00
Srivatsa S. Bhat
93ae4f978c CPU hotplug: Provide lockless versions of callback registration functions
The following method of CPU hotplug callback registration is not safe
due to the possibility of an ABBA deadlock involving the cpu_add_remove_lock
and the cpu_hotplug.lock.

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	register_cpu_notifier(&foobar_cpu_notifier);

	put_online_cpus();

The deadlock is shown below:

          CPU 0                                         CPU 1
          -----                                         -----

   Acquire cpu_hotplug.lock
   [via get_online_cpus()]

                                              CPU online/offline operation
                                              takes cpu_add_remove_lock
                                              [via cpu_maps_update_begin()]

   Try to acquire
   cpu_add_remove_lock
   [via register_cpu_notifier()]

                                              CPU online/offline operation
                                              tries to acquire cpu_hotplug.lock
                                              [via cpu_hotplug_begin()]

                            *** DEADLOCK! ***

The problem here is that callback registration takes the locks in one order
whereas the CPU hotplug operations take the same locks in the opposite order.
To avoid this issue and to provide a race-free method to register CPU hotplug
callbacks (along with initialization of already online CPUs), introduce new
variants of the callback registration APIs that simply register the callbacks
without holding the cpu_add_remove_lock during the registration. That way,
we can avoid the ABBA scenario. However, we will need to hold the
cpu_add_remove_lock throughout the entire critical section, to protect updates
to the callback/notifier chain.

This can be achieved by writing the callback registration code as follows:

	cpu_maps_update_begin(); [ or cpu_notifier_register_begin(); see below ]

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	/* This doesn't take the cpu_add_remove_lock */
	__register_cpu_notifier(&foobar_cpu_notifier);

	cpu_maps_update_done();  [ or cpu_notifier_register_done(); see below ]

Note that we can't use get_online_cpus() here instead of cpu_maps_update_begin()
because the cpu_hotplug.lock is dropped during the invocation of CPU_POST_DEAD
notifiers, and hence get_online_cpus() cannot provide the necessary
synchronization to protect the callback/notifier chains against concurrent
reads and writes. On the other hand, since the cpu_add_remove_lock protects
the entire hotplug operation (including CPU_POST_DEAD), we can use
cpu_maps_update_begin/done() to guarantee proper synchronization.

Also, since cpu_maps_update_begin/done() is like a super-set of
get/put_online_cpus(), the former naturally protects the critical sections
from concurrent hotplug operations.

Since the names cpu_maps_update_begin/done() don't make much sense in CPU
hotplug callback registration scenarios, we'll introduce new APIs named
cpu_notifier_register_begin/done() and map them to cpu_maps_update_begin/done().

In summary, introduce the lockless variants of un/register_cpu_notifier() and
also export the cpu_notifier_register_begin/done() APIs for use by modules.
This way, we provide a race-free way to register hotplug callbacks as well as
perform initialization for the CPUs that are already online.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20 13:43:40 +01:00
Gautham R. Shenoy
a19423b987 CPU hotplug: Add lockdep annotations to get/put_online_cpus()
Add lockdep annotations for get/put_online_cpus() and
cpu_hotplug_begin()/cpu_hotplug_end().

Cc: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20 13:43:40 +01:00
Linus Torvalds
fe8a45df36 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "Four bugfixes and one performance fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Avoid integer overflow
  sched: Optimize task_sched_runtime()
  sched/numa: Cure update_numa_stats() vs. hotplug
  sched/numa: Fix NULL pointer dereference in task_numa_migrate()
  sched: Fix endless sync_sched/rcu() loop inside _cpu_down()
2013-11-14 16:55:11 +09:00
Michael wang
106dd5afde sched: Fix endless sync_sched/rcu() loop inside _cpu_down()
Commit 6acce3ef8:

	sched: Remove get_online_cpus() usage

tries to do sync_sched/rcu() inside _cpu_down() but triggers:

	INFO: task swapper/0:1 blocked for more than 120 seconds.
	...
	[<ffffffff811263dc>] synchronize_rcu+0x2c/0x30
	[<ffffffff81d1bd82>] _cpu_down+0x2b2/0x340
	...

It was caused by that in the rcu boost case we rely on smpboot thread to
finish the rcu callback, which has already been parked before sync in here
and leads to the endless sync_sched/rcu().

This patch exchanges the sequence of smpboot_park_threads() and
sync_sched/rcu() to fix the bug.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5282EDC0.6060003@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13 13:33:50 +01:00
Toshi Kani
01b0f19707 cpu/mem hotplug: add try_online_node() for cpu_up()
cpu_up() has #ifdef CONFIG_MEMORY_HOTPLUG code blocks, which call
mem_online_node() to put its node online if offlined and then call
build_all_zonelists() to initialize the zone list.

These steps are specific to memory hotplug, and should be managed in
mm/memory_hotplug.c.  lock_memory_hotplug() should also be held for the
whole steps.

For this reason, this patch replaces mem_online_node() with
try_online_node(), which performs the whole steps with
lock_memory_hotplug() held.  try_online_node() is named after
try_offline_node() as they have similar purpose.

There is no functional change in this patch.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:04 +09:00
Peter Zijlstra
6acce3ef84 sched: Remove get_online_cpus() usage
Remove get_online_cpus() usage from the scheduler; there's 4 sites that
use it:

 - sched_init_smp(); where its completely superfluous since we're in
   'early' boot and there simply cannot be any hotplugging.

 - sched_getaffinity(); we already take a raw spinlock to protect the
   task cpus_allowed mask, this disables preemption and therefore
   also stabilizes cpu_online_mask as that's modified using
   stop_machine. However switch to active mask for symmetry with
   sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active
   mask stability by inserting sync_rcu/sched() into _cpu_down.

 - sched_setaffinity(); we don't appear to need get_online_cpus()
   either, there's two sites where hotplug appears relevant:
    * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask,
      for the cpuset case we hold task_lock, which is a spinlock and
      thus for mainline disables preemption (might cause pain on RT).
    * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has
      preemption properly disabled; also it already deals with hotplug
      races explicitly where it releases them.

 - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for
   us with a little trickery. By adding a sync_sched/rcu() after the
   CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for
   cpu_active_mask. Use these to validate that both our cpus are active
   when queueing the stop work before we queue the stop_machine works
   for take_cpu_down().

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-16 14:22:16 +02:00
Toshi Kani
b9d10be7a8 ACPI / processor: Acquire writer lock to update CPU maps
CPU system maps are protected with reader/writer locks.  The reader
lock, get_online_cpus(), assures that the maps are not updated while
holding the lock.  The writer lock, cpu_hotplug_begin(), is used to
udpate the cpu maps along with cpu_maps_update_begin().

However, the ACPI processor handler updates the cpu maps without
holding the the writer lock.

acpi_map_lsapic() is called from acpi_processor_hotadd_init() to
update cpu_possible_mask and cpu_present_mask.  acpi_unmap_lsapic()
is called from acpi_processor_remove() to update cpu_possible_mask.
Currently, they are either unprotected or protected with the reader
lock, which is not correct.

For example, the get_online_cpus() below is supposed to assure that
cpu_possible_mask is not changed while the code is iterating with
for_each_possible_cpu().

        get_online_cpus();
        for_each_possible_cpu(cpu) {
		:
        }
        put_online_cpus();

However, this lock has no protection with CPU hotplug since the ACPI
processor handler does not use the writer lock when it updates
cpu_possible_mask.  The reader lock does not serialize within the
readers.

This patch protects them with the writer lock with cpu_hotplug_begin()
along with cpu_maps_update_begin(), which must be held before calling
cpu_hotplug_begin().  It also protects arch_register_cpu() /
arch_unregister_cpu(), which creates / deletes a sysfs cpu device
interface.  For this purpose it changes cpu_hotplug_begin() and
cpu_hotplug_done() to global and exports them in cpu.h.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-13 12:20:16 +02:00
Paul Gortmaker
0db0628d90 kernel: delete __cpuinit usage from all core kernel files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:59 -04:00
Srivatsa S. Bhat
16e53dbf10 CPU hotplug: provide a generic helper to disable/enable CPU hotplug
There are instances in the kernel where we would like to disable CPU
hotplug (from sysfs) during some important operation.  Today the freezer
code depends on this and the code to do it was kinda tailor-made for
that.

Restructure the code and make it generic enough to be useful for other
usecases too.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:44 -07:00
Linus Torvalds
bcbd818c06 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preparatory smp/hotplug patches from Ingo Molnar:
 "Some early preparatory changes for the WIP hotplug rework by Thomas
  Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine: Use smpboot threads
  stop_machine: Store task reference in a separate per cpu variable
  smpboot: Allow selfparking per cpu threads
2013-02-19 19:04:55 -08:00
Thomas Gleixner
14e568e78f stop_machine: Use smpboot threads
Use the smpboot thread infrastructure. Mark the stopper thread
selfparking and park it after it has finished the take_cpu_down()
work.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Richard Weinberger <rw@linutronix.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130131120741.686315164@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-14 15:29:38 +01:00
Frederic Weisbecker
6fac4829ce cputime: Use accessors to read task cputime stats
This is in preparation for the full dynticks feature. While
remotely reading the cputime of a task running in a full
dynticks CPU, we'll need to do some extra-computation. This
way we can account the time it spent tickless in userspace
since its last cputime snapshot.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27 19:23:31 +01:00
Linus Torvalds
74b8423345 Merge branch 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 BSP hotplug changes from Ingo Molnar:
 "This tree enables CPU#0 (the boot processor) to be onlined/offlined on
  x86, just like any other CPU.  Enabled on Intel CPUs for now.

  Allowing this required the identification and fixing of latent CPU#0
  assumptions (such as CPU#0 initializations, etc.) in the x86
  architecture code, plus the identification of barriers to
  BSP-offlining, such as active PIC interrupts which can only be
  serviced on the BSP.

  It's behind a default-off option, and there's a debug option that
  allows the automatic testing of this feature.

  The motivation of this feature is to allow and prepare for true
  CPU-hotplug hardware support: recent changes to MCE support enable us
  to detect a deteriorating but not yet hard-failing L1/L2 cache on a
  CPU that could be soft-unplugged - or a failing L3 cache on a
  multi-socket system.

  Note that true hardware hot-plug is not yet fully enabled by this,
  because that requires a special platform wakeup sequence to be sent to
  the freshly powered up CPU#0.  Future patches for this are planned,
  once such a platform exists.  Chicken and egg"

* 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, topology: Debug CPU0 hotplug
  x86/i387.c: Initialize thread xstate only on CPU0 only once
  x86, hotplug: Handle retrigger irq by the first available CPU
  x86, hotplug: The first online processor saves the MTRR state
  x86, hotplug: During CPU0 online, enable x2apic, set_numa_node.
  x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI
  x86-32, hotplug: Add start_cpu0() entry point to head_32.S
  x86-64, hotplug: Add start_cpu0() entry point to head_64.S
  kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback
  x86, hotplug, suspend: Online CPU0 for suspend or hibernate
  x86, hotplug: Support functions for CPU0 online/offline
  x86, topology: Don't offline CPU0 if any PIC irq can not be migrated out of it
  x86, Kconfig: Add config switch for CPU0 hotplug
  doc: Add x86 CPU0 online/offline feature
2012-12-11 19:56:33 -08:00
Yasuaki Ishimatsu
5e5041f352 ACPI / processor: prevent cpu from becoming online
Even if acpi_processor_handle_eject() offlines cpu, there is a chance
to online the cpu after that. So the patch closes the window by using
get/put_online_cpus().

Why does the patch change _cpu_up() logic?

The patch cares the race of hot-remove cpu and _cpu_up(). If the patch
does not change it, there is the following race.

hot-remove cpu                         |  _cpu_up()
------------------------------------- ------------------------------------
call acpi_processor_handle_eject()     |
     call cpu_down()                   |
     call get_online_cpus()            |
                                       | call cpu_hotplug_begin() and stop here
     call arch_unregister_cpu()        |
     call acpi_unmap_lsapic()          |
     call put_online_cpus()            |
                                       | start and continue _cpu_up()
     return acpi_processor_remove()    |
continue hot-remove the cpu            |

So _cpu_up() can continue to itself. And hot-remove cpu can also continue
itself. If the patch changes _cpu_up() logic, the race disappears as below:

hot-remove cpu                         | _cpu_up()
-----------------------------------------------------------------------
call acpi_processor_handle_eject()     |
     call cpu_down()                   |
     call get_online_cpus()            |
                                       | call cpu_hotplug_begin() and stop here
     call arch_unregister_cpu()        |
     call acpi_unmap_lsapic()          |
          cpu's cpu_present is set     |
          to false by set_cpu_present()|
     call put_online_cpus()            |
                                       | start _cpu_up()
                                       | check cpu_present() and return -EINVAL
     return acpi_processor_remove()    |
continue hot-remove the cpu            |

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:16:00 +01:00
Fenghua Yu
6e32d479db kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback
cpu_hotplug_pm_callback should have higher priority than
bsp_pm_callback which depends on cpu_hotplug_pm_callback to disable cpu hotplug
to avoid race during bsp online checking.

This is to hightlight the priorities between the two callbacks in case people
may overlook the order.

Ideally the priorities should be defined in macro/enum instead of fixed values.
To do that, a seperate patchset may be pushed which will touch serveral other
generic files and is out of scope of this patchset.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-7-git-send-email-fenghua.yu@intel.com
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 09:39:50 -08:00
Srivatsa S. Bhat
075663d198 CPU hotplug, debug: detect imbalance between get_online_cpus() and put_online_cpus()
The synchronization between CPU hotplug readers and writers is achieved
by means of refcounting, safeguarded by the cpu_hotplug.lock.

get_online_cpus() increments the refcount, whereas put_online_cpus()
decrements it.  If we ever hit an imbalance between the two, we end up
compromising the guarantees of the hotplug synchronization i.e, for
example, an extra call to put_online_cpus() can end up allowing a
hotplug reader to execute concurrently with a hotplug writer.

So, add a WARN_ON() in put_online_cpus() to detect such cases where the
refcount can go negative, and also attempt to fix it up, so that we can
continue to run.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:15 +09:00
Linus Torvalds
da8347969f Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/asm changes from Ingo Molnar:
 "The one change that stands out is the alternatives patching change
  that prevents us from ever patching back instructions from SMP to UP:
  this simplifies things and speeds up CPU hotplug.

  Other than that it's smaller fixes, cleanups and improvements."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Unspaghettize do_trap()
  x86_64: Work around old GAS bug
  x86: Use REP BSF unconditionally
  x86: Prefer TZCNT over BFS
  x86/64: Adjust types of temporaries used by ffs()/fls()/fls64()
  x86: Drop unnecessary kernel_eflags variable on 64-bit
  x86/smp: Don't ever patch back to UP if we unplug cpus
2012-10-01 10:46:27 -07:00
Rusty Russell
816afe4ff9 x86/smp: Don't ever patch back to UP if we unplug cpus
We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time.  In particular, not if we
unplug CPUs to return to a single cpu.

Paul McKenney points out:

 mean offline overhead is 6251/48=130.2 milliseconds.

 If I remove the alternatives_smp_switch() from the offline
 path [...] the mean offline overhead is 550/42=13.1 milliseconds

Basically, we're never going to get those 120ms back, and the
code is pretty messy.

We get rid of:

 1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
    documentation is wrong. It's now the default.

 2) The skip_smp_alternatives flag used by suspend.

 3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
    which were only used to set this one flag.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paul.mckenney@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.au
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-23 10:45:13 +02:00
Thomas Gleixner
f97f8f06a4 smpboot: Provide infrastructure for percpu hotplug threads
Provide a generic interface for setting up and tearing down percpu
threads.

On registration the threads for already online cpus are created and
started. On deregistration (modules) the threads are stoppped.

During hotplug operations the threads are created, started, parked and
unparked. The datastructure for registration provides a pointer to
percpu storage space and optional setup, cleanup, park, unpark
functions. These functions are called when the thread state changes.

Each implementation has to provide a function which is queried and
returns whether the thread should run and the thread function itself.

The core code handles all state transitions and avoids duplicated code
in the call sites.

[ paulmck: Preemption leak fix ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20120716103948.352501068@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-13 17:01:07 +02:00
Jiang Liu
9adb62a5df mm/hotplug: correctly setup fallback zonelists when creating new pgdat
When hotadd_new_pgdat() is called to create new pgdat for a new node, a
fallback zonelist should be created for the new node.  There's code to try
to achieve that in hotadd_new_pgdat() as below:

	/*
	 * The node we allocated has no zone fallback lists. For avoiding
	 * to access not-initialized zonelist, build here.
	 */
	mutex_lock(&zonelists_mutex);
	build_all_zonelists(pgdat, NULL);
	mutex_unlock(&zonelists_mutex);

But it doesn't work as expected.  When hotadd_new_pgdat() is called, the
new node is still in offline state because node_set_online(nid) hasn't
been called yet.  And build_all_zonelists() only builds zonelists for
online nodes as:

        for_each_online_node(nid) {
                pg_data_t *pgdat = NODE_DATA(nid);

                build_zonelists(pgdat);
                build_zonelist_cache(pgdat);
        }

Though we hope to create zonelist for the new pgdat, but it doesn't.  So
add a new parameter "pgdat" the build_all_zonelists() to build pgdat for
the new pgdat too.

Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Keping Chen <chenkeping@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:44 -07:00
Anton Vorontsov
e4cc2f873a kernel/cpu.c: document clear_tasks_mm_cpumask()
Add more comments on clear_tasks_mm_cpumask, plus adds a runtime check:
the function is only suitable for offlined CPUs, and if called
inappropriately, the kernel should scream aloud.

[akpm@linux-foundation.org: tweak comment: s/walks up/walks/, use 80 cols]
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:30 -07:00
Anton Vorontsov
cb79295e20 cpu: introduce clear_tasks_mm_cpumask() helper
Many architectures clear tasks' mm_cpumask like this:

	read_lock(&tasklist_lock);
	for_each_process(p) {
		if (p->mm)
			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
	}
	read_unlock(&tasklist_lock);

Depending on the context, the code above may have several problems,
such as:

1. Working with task->mm w/o getting mm or grabing the task lock is
   dangerous as ->mm might disappear (exit_mm() assigns NULL under
   task_lock(), so tasklist lock is not enough).

2. Checking for process->mm is not enough because process' main
   thread may exit or detach its mm via use_mm(), but other threads
   may still have a valid mm.

This patch implements a small helper function that does things
correctly, i.e.:

1. We take the task's lock while whe handle its mm (we can't use
   get_task_mm()/mmput() pair as mmput() might sleep);

2. To catch exited main thread case, we use find_lock_task_mm(),
   which walks up all threads and returns an appropriate task
   (with task lock held).

Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in
the new helper, instead we take the rcu read lock. We can do this
because the function is called after the cpu is taken down and marked
offline, so no new tasks will get this cpu set in their mm mask.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:29 -07:00
Suresh Siddha
3bb5d2ee39 smp, idle: Allocate idle thread for each possible cpu during boot
percpu areas are already allocated during boot for each possible cpu.
percpu idle threads can be considered as an extension of the percpu areas,
and allocate them for each possible cpu during boot.

This will eliminate the need for workqueue based idle thread allocation.
In future we can move the idle thread area into the percpu area too.

[ tglx: Moved the loop into smpboot.c and added an error check when
  the init code failed to allocate an idle thread for a cpu which
  should be onlined ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: venki@google.com
Link: http://lkml.kernel.org/r/1334966930.28674.245.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-03 19:32:34 +02:00
Thomas Gleixner
29d5e0476e smp: Provide generic idle thread allocation
All SMP architectures have magic to fork the idle task and to store it
for reusage when cpu hotplug is enabled. Provide a generic
infrastructure for it.

Create/reinit the idle thread for the cpu which is brought up in the
generic code and hand the thread pointer to the architecture code via
__cpu_up().

Note, that fork_idle() is called via a workqueue, because this
guarantees that the idle thread does not get a reference to a user
space VM. This can happen when the boot process did not bring up all
possible cpus and a later cpu_up() is initiated via the sysfs
interface. In that case fork_idle() would be called in the context of
the user space task and take a reference on the user space VM.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org
Acked-by: Venkatesh Pallipadi <venki@google.com>
Link: http://lkml.kernel.org/r/20120420124557.102478630@linutronix.de
2012-04-26 12:06:09 +02:00
Thomas Gleixner
38498a67aa smp: Add generic smpboot facility
Start a new file, which will hold SMP and CPU hotplug related generic
infrastructure.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20120420124557.035417523@linutronix.de
2012-04-26 12:06:09 +02:00
Thomas Gleixner
8239c25f47 smp: Add task_struct argument to __cpu_up()
Preparatory patch to make the idle thread allocation for secondary
cpus generic.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
2012-04-26 12:06:09 +02:00
Linus Torvalds
eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Linus Torvalds
0db49b72bc Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  sched/tracing: Add a new tracepoint for sleeptime
  sched: Disable scheduler warnings during oopses
  sched: Fix cgroup movement of waking process
  sched: Fix cgroup movement of newly created process
  sched: Fix cgroup movement of forking process
  sched: Remove cfs bandwidth period check in tg_set_cfs_period()
  sched: Fix load-balance lock-breaking
  sched: Replace all_pinned with a generic flags field
  sched: Only queue remote wakeups when crossing cache boundaries
  sched: Add missing rcu_dereference() around ->real_parent usage
  [S390] fix cputime overflow in uptime_proc_show
  [S390] cputime: add sparse checking and cleanup
  sched: Mark parent and real_parent as __rcu
  sched, nohz: Fix missing RCU read lock
  sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
  sched, nohz: Fix the idle cpu check in nohz_idle_balance
  sched: Use jump_labels for sched_feat
  sched/accounting: Fix parameter passing in task_group_account_field
  sched/accounting: Fix user/system tick double accounting
  sched/accounting: Re-use scheduler statistics for the root cgroup
  ...

Fix up conflicts in
 - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h
	usecs_to_cputime64() vs the sparse cleanups
 - kernel/sched/fair.c, kernel/time/tick-sched.c
	scheduler changes in multiple branches
2012-01-06 08:44:54 -08:00
Martin Schwidefsky
648616343c [S390] cputime: add sparse checking and cleanup
Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-15 14:56:19 +01:00
Paul E. McKenney
a513f6bab0 cpu: Export cpu_up()
Building rcutorture as a module requires cpu_up() as well as cpu_down()
exported, so apply EXPORT_SYMBOL_GPL().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-12 15:55:15 -08:00
Fenghua Yu
d7268a31c8 CPU: Add right qualifiers for alloc_frozen_cpus() and cpu_hotplug_pm_sync_init()
Add __init for functions alloc_frozen_cpus() and cpu_hotplug_pm_sync_init()
because they are only called during boot time.

Add static for function cpu_hotplug_pm_sync_init() because its scope is limited
in this file only.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-23 21:15:20 +01:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Srivatsa S. Bhat
79cfbdfa87 PM / Sleep: Fix race between CPU hotplug and freezer
The CPU hotplug notifications sent out by the _cpu_up() and _cpu_down()
functions depend on the value of the 'tasks_frozen' argument passed to them
(which indicates whether tasks have been frozen or not).
(Examples for such CPU hotplug notifications: CPU_ONLINE, CPU_ONLINE_FROZEN,
CPU_DEAD, CPU_DEAD_FROZEN).

Thus, it is essential that while the callbacks for those notifications are
running, the state of the system with respect to the tasks being frozen or
not remains unchanged, *throughout that duration*. Hence there is a need for
synchronizing the CPU hotplug code with the freezer subsystem.

Since the freezer is involved only in the Suspend/Hibernate call paths, this
patch hooks the CPU hotplug code to the suspend/hibernate notifiers
PM_[SUSPEND|HIBERNATE]_PREPARE and PM_POST_[SUSPEND|HIBERNATE] to prevent
the race between CPU hotplug and freezer, thus ensuring that CPU hotplug
notifications will always be run with the state of the system really being
what the notifications indicate, _throughout_ their execution time.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-04 22:28:09 +01:00
Paul Gortmaker
9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Michael Rodriguez
4d51985e48 kernel/cpu.c: fix many errors related to style.
Change the printk() calls to have the KERN_INFO/KERN_ERROR stuff, and
fixes other coding style errors.  Not _all_ of them are gone, though.

[akpm@linux-foundation.org: revert the bits I disagree with]
Signed-off-by: Michael Rodriguez <dkingston02@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:11 -07:00
Linus Torvalds
47935a731b Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout
2011-01-06 11:11:50 -08:00
Suresh Siddha
3fb82d56ad x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume
During suspend, we disable all the non boot cpus. And during resume we bring
them all back again. So no need to do alternatives_smp_switch() in between.

On my core 2 based laptop, this speeds up the suspend path by 15msec and the
resume path by 5 msec (suspend/resume speed up differences can be attributed
to the different P-states that the cpu is in during suspend/resume).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1290557500.4946.8.camel@sbsiddha-MOBL3.sc.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-13 16:23:56 -08:00
Peter Zijlstra
51a96c7781 cpu: Remove incorrect BUG_ON
Oleg mentioned that there is no actual guarantee the dying cpu's
migration thread is actually finished running when we get there, so
replace the BUG_ON() with a spinloop waiting for it.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-23 10:29:08 +01:00
Dhaval Giani
2e01f4740a cpu: Remove unused variable
GCC warns us about:

 kernel/cpu.c: In function ‘take_cpu_down’:
 kernel/cpu.c:200:15: warning: unused variable ‘cpu’

This variable is unused since param->hcpu is directly
used later on in cpu_notify.

Signed-off-by: Dhaval Giani <dhaval_giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290091494.1145.5.camel@gondor.retis>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-23 10:29:07 +01:00
Peter Zijlstra
48c5ccae88 sched: Simplify cpu-hot-unplug task migration
While discussing the need for sched_idle_next(), Oleg remarked that
since try_to_wake_up() ensures sleeping tasks will end up running on a
sane cpu, we can do away with migrate_live_tasks().

If we then extend the existing hack of migrating current from
CPU_DYING to migrating the full rq worth of tasks from CPU_DYING, the
need for the sched_idle_next() abomination disappears as well, since
idle will be the only possible thread left after the migration thread
stops.

This greatly simplifies the hot-unplug task migration path, as can be
seen from the resulting code reduction (and about half the new lines
are comments).

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1289851597.2109.547.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:27:46 +01:00
Tejun Heo
3a101d0548 sched: adjust when cpu_active and cpuset configurations are updated during cpu on/offlining
Currently, when a cpu goes down, cpu_active is cleared before
CPU_DOWN_PREPARE starts and cpuset configuration is updated from a
default priority cpu notifier.  When a cpu is coming up, it's set
before CPU_ONLINE but cpuset configuration again is updated from the
same cpu notifier.

For cpu notifiers, this presents an inconsistent state.  Threads which
a CPU_DOWN_PREPARE notifier expects to be bound to the CPU can be
migrated to other cpus because the cpu is no more inactive.

Fix it by updating cpu_active in the highest priority cpu notifier and
cpuset configuration in the second highest when a cpu is coming up.
Down path is updated similarly.  This guarantees that all other cpu
notifiers see consistent cpu_active and cpuset configuration.

cpuset_track_online_cpus() notifier is converted to
cpuset_update_active_cpus() which just updates the configuration and
now called from cpuset_cpu_[in]active() notifiers registered from
sched_init_smp().  If cpuset is disabled, cpuset_update_active_cpus()
degenerates into partition_sched_domains() making separate notifier
for !CONFIG_CPUSETS unnecessary.

This problem is triggered by cmwq.  During CPU_DOWN_PREPARE, hotplug
callback creates a kthread and kthread_bind()s it to the target cpu,
and the thread is expected to run on that cpu.

* Ingo's test discovered __cpuinit/exit markups were incorrect.
  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Menage <menage@google.com>
2010-06-08 21:40:36 +02:00
Daniel J Blueman
5c113fbeed fix cpu_chain section mismatch...
In commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") the new helper functions access
cpu_chain.  As a result, it shouldn't be marked __cpuinitdata (via
section mismatch warning).

Alternatively, the helper functions should be forced inline, or marked
__ref or __cpuinit.  In the meantime, this patch silences the warning
the trivial way.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-01 09:22:50 -07:00
Rafael J. Wysocki
e9a5f426b8 CPU: Avoid using unititialized error variable in disable_nonboot_cpus()
If there's only one CPU online when disable_nonboot_cpus() is called,
the error variable will not be initialized and that may lead to
erroneous behavior.  Fix this issue by initializing error in
disable_nonboot_cpus() as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-30 09:06:00 -07:00
Linus Torvalds
00b9b0af58 Avoid warning when CPU hotplug isn't enabled
Commit e9fb7631eb ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") also introduced this annoying
warning:

  kernel/cpu.c:157: warning: 'cpu_notify_nofail' defined but not used

when CONFIG_HOTPLUG_CPU wasn't set.

So move that helper inside the #ifdef CONFIG_HOTPLUG_CPU region, and
simplify it while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 10:32:08 -07:00
Lai Jiangshan
79a6cdeb7e cpuhotplug: do not need cpu_hotplug_begin() when CONFIG_HOTPLUG_CPU=n
Since when CONFIG_HOTPLUG_CPU=n, get_online_cpus() do nothing, so we don't
need cpu_hotplug_begin() either.

This patch moves cpu_hotplug_begin()/cpu_hotplug_done() into the code
block of CONFIG_HOTPLUG_CPU=y.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:48 -07:00
Akinobu Mita
e6bde73b07 cpu-hotplug: return better errno on cpu hotplug failure
Currently, onlining or offlining a CPU failure by one of the cpu notifiers
error always cause -EINVAL error.  (i.e.  writing 0 or 1 to
/sys/devices/system/cpu/cpuX/online gets EINVAL)

To get better error reporting rather than always getting -EINVAL, This
changes cpu_notify() to return -errno value with notifier_to_errno() and
fix the callers.  Now that cpu notifiers can return encapsulate errno
value.

Currently, all cpu hotplug notifiers return NOTIFY_OK, NOTIFY_BAD, or
NOTIFY_DONE.  So cpu_notify() can returns 0 or -EPERM with this change for
now.

(notifier_to_errno(NOTIFY_OK) == 0, notifier_to_errno(NOTIFY_DONE) == 0,
notifier_to_errno(NOTIFY_BAD) == -EPERM)

Forthcoming patches convert several cpu notifiers to return encapsulate
errno value with notifier_from_errno().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:47 -07:00
Akinobu Mita
e9fb7631eb cpu-hotplug: introduce cpu_notify(), __cpu_notify(), cpu_notify_nofail()
No functional change.  These are just wrappers of
raw_cpu_notifier_call_chain.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:47 -07:00
Haicheng Li
4eaf3f6439 mem-hotplug: fix potential race while building zonelist for new populated zone
Add global mutex zonelists_mutex to fix the possible race:

     CPU0                                  CPU1                    CPU2
(1) zone->present_pages += online_pages;
(2)                                       build_all_zonelists();
(3)                                                               alloc_page();
(4)                                                               free_page();
(5) build_all_zonelists();
(6)   __build_all_zonelists();
(7)     zone->pageset = alloc_percpu();

In step (3,4), zone->pageset still points to boot_pageset, so bad
things may happen if 2+ nodes are in this state. Even if only 1 node
is accessing the boot_pageset, (3) may still consume too much memory
to fail the memory allocations in step (7).

Besides, atomic operation ensures alloc_percpu() in step (7) will never fail
since there is a new fresh memory block added in step(6).

[haicheng.li@linux.intel.com: hold zonelists_mutex when build_all_zonelists]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Haicheng Li
1f522509c7 mem-hotplug: avoid multiple zones sharing same boot strapping boot_pageset
For each new populated zone of hotadded node, need to update its pagesets
with dynamically allocated per_cpu_pageset struct for all possible CPUs:

    1) Detach zone->pageset from the shared boot_pageset
       at end of __build_all_zonelists().

    2) Use mutex to protect zone->pageset when it's still
       shared in onlined_pages()

Otherwises, multiple zones of different nodes would share same boot strapping
boot_pageset for same CPU, which will finally cause below kernel panic:

  ------------[ cut here ]------------
  kernel BUG at mm/page_alloc.c:1239!
  invalid opcode: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0
   [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0
   [<ffffffff81128407>] __page_cache_alloc+0x67/0x70
   [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260
   [<ffffffff81132751>] ra_submit+0x21/0x30
   [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0
   [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0
   [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670
   [<ffffffff81266cfa>] nfs_file_read+0xca/0x130
   [<ffffffff8117b20a>] do_sync_read+0xfa/0x140
   [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0
   [<ffffffff8117c151>] sys_read+0x51/0x80
   [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900
   RSP <ffff88000d1e78a8>
  ---[ end trace 4bda28328b9990db ]

[akpm@linux-foundation.org: merge fix]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:01 -07:00
minskey guo
cf23422b9d cpu/mem hotplug: enable CPUs online before local memory online
Enable users to online CPUs even if the CPUs belongs to a numa node which
doesn't have onlined local memory.

The zonlists(pg_data_t.node_zonelists[]) of a numa node are created either
in system boot/init period, or at the time of local memory online.  For a
numa node without onlined local memory, its zonelists are not initialized
at present.  As a result, any memory allocation operations executed by
CPUs within this node will fail.  In fact, an out-of-memory error is
triggered when attempt to online CPUs before memory comes to online.

This patch tries to create zonelists for such numa nodes, so that the
memory allocation for this node can be fallback'ed to other nodes.

[akpm@linux-foundation.org: remove unneeded export]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: minskey guo<chaohong.guo@intel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:00 -07:00
Tejun Heo
3fc1f1e27a stop_machine: reimplement using cpu_stop
Reimplement stop_machine using cpu_stop.  As cpu stoppers are
guaranteed to be available for all online cpus,
stop_machine_create/destroy() are no longer necessary and removed.

With resource management and synchronization handled by cpu_stop, the
new implementation is much simpler.  Asking the cpu_stop to execute
the stop_cpu() state machine on all online cpus with cpu hotplug
disabled is enough.

stop_machine itself doesn't need to manage any global resources
anymore, so all per-instance information is rolled into struct
stop_machine_data and the mutex and all static data variables are
removed.

The previous implementation created and destroyed RT workqueues as
necessary which made stop_machine() calls highly expensive on very
large machines.  According to Dimitri Sivanich, preventing the dynamic
creation/destruction makes booting faster more than twice on very
large machines.  cpu_stop resources are preallocated for all online
cpus and should have the same effect.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
2010-05-06 18:49:20 +02:00
Ingo Molnar
b257c14ceb Merge branch 'linus' into sched/core
Merge reason: merge the latest fixes, update to -rc4.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-15 09:36:16 +02:00
Oleg Nesterov
6a1bdc1b57 sched: _cpu_down(): Don't play with current->cpus_allowed
_cpu_down() changes the current task's affinity and then recovers it at
the end. The problems are well known: we can't restore old_allowed if it
was bound to the now-dead-cpu, and we can race with the userspace which
can change cpu-affinity during unplug.

_cpu_down() should not play with current->cpus_allowed at all. Instead,
take_cpu_down() can migrate the caller of _cpu_down() after __cpu_disable()
removes the dying cpu from cpu_online_mask.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100315091023.GA9148@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:03 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Chen Gong
87d5e0236d kernel/cpu.c: delete deprecated definition in cpu_up()
Additional_cpus is only supported for IA64 now.  X86_64 should not be
included.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:28 -08:00
Frans Pop
9d3cfc4c1d sched: Correct printk whitespace in warning from cpu down task check
Due to an incorrect line break the output currently contains tabs.
Also remove trailing space.

The actual output that logcheck sent me looked like this:
 Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040)

After this patch it becomes:
 Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040)

Signed-off-by: Frans Pop <elendilplanet.nl>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <201001251456.34996.elendil@planet.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-28 06:59:55 +01:00
Peter Zijlstra
11854247e2 sched: Fix incorrect sanity check
We moved to migrate on wakeup, which means that sleeping tasks could
still be present on offline cpus. Amend the check to only test running
tasks.

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-28 06:59:51 +01:00
Xiaotian Feng
9ee349ad6d sched: Fix set_cpu_active() in cpu_down()
Sachin found cpu hotplug test failures on powerpc, which made
the kernel hang on his POWER box.

The problem is that we fail to re-activate a cpu when a
hot-unplug fails. Fix this by moving the de-activation into
_cpu_down after doing the initial checks.

Remove the synchronize_sched() calls and rely on those implied
by rebuilding the sched domains using the new mask.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091216170517.500272612@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 19:01:53 +01:00
Linus Torvalds
702a7c7609 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
  sched: Remove forced2_migrations stats
  sched: Fix memory leak in two error corner cases
  sched: Fix build warning in get_update_sysctl_factor()
  sched: Update normalized values on user updates via proc
  sched: Make tunable scaling style configurable
  sched: Fix missing sched tunable recalculation on cpu add/remove
  sched: Fix task priority bug
  sched: cgroup: Implement different treatment for idle shares
  sched: Remove unnecessary RCU exclusion
  sched: Discard some old bits
  sched: Clean up check_preempt_wakeup()
  sched: Move update_curr() in check_preempt_wakeup() to avoid redundant call
  sched: Sanitize fork() handling
  sched: Clean up ttwu() rq locking
  sched: Remove rq->clock coupling from set_task_cpu()
  sched: Consolidate select_task_rq() callers
  sched: Remove sysctl.sched_features
  sched: Protect sched_rr_get_param() access to task->sched_class
  sched: Protect task->cpus_allowed access in sched_getaffinity()
  sched: Fix balance vs hotplug race
  ...

Fixed up conflicts in kernel/sysctl.c (due to sysctl cleanup)
2009-12-12 11:34:10 -08:00
Peter Zijlstra
6ad4c18884 sched: Fix balance vs hotplug race
Since (e761b77: cpu hotplug, sched: Introduce cpu_active_map and redo
sched domain managment) we have cpu_active_mask which is suppose to rule
scheduler migration and load-balancing, except it never (fully) did.

The particular problem being solved here is a crash in try_to_wake_up()
where select_task_rq() ends up selecting an offline cpu because
select_task_rq_fair() trusts the sched_domain tree to reflect the
current state of affairs, similarly select_task_rq_rt() trusts the
root_domain.

However, the sched_domains are updated from CPU_DEAD, which is after the
cpu is taken offline and after stop_machine is done. Therefore it can
race perfectly well with code assuming the domains are right.

Cure this by building the domains from cpu_active_mask on
CPU_DOWN_PREPARE.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-06 21:10:56 +01:00
Mike Travis
feae3203d7 timers, init: Limit the number of per cpu calibration bootup messages
Limit the number of per cpu calibration messages by only
printing out results for the first cpu to boot.

Also, don't print "CPUx is down" as this is expected, and we
don't need 4096 reminders... ;-)

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091118002219.889552000@alcatraz.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 10:18:42 +01:00
Linus Torvalds
227423904c Merge branch 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: Fix cacheflush address in change_page_attr_set_clr()
  mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set
  x86: Fix earlyprintk=dbgp for machines without NX
  x86, pat: Sanity check remap_pfn_range for RAM region
  x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
  x86, pat: Add lookup_memtype to get the current memtype of a paddr
  x86, pat: Use page flags to track memtypes of RAM pages
  x86, pat: Generalize the use of page flag PG_uncached
  x86, pat: Add rbtree to do quick lookup in memtype tracking
  x86, pat: Add PAT reserve free to io_mapping* APIs
  x86, pat: New i/f for driver to request memtype for IO regions
  x86, pat: ioremap to follow same PAT restrictions as other PAT users
  x86, pat: Keep identity maps consistent with mmaps even when pat_disabled
  x86, mtrr: make mtrr_aps_delayed_init static bool
  x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
  generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
  x86: Fix an incorrect argument of reserve_bootmem()
  x86: Fix system crash when loading with "reservetop" parameter
2009-09-15 09:19:38 -07:00
Shane Wang
69575d3886 x86, intel_txt: clean up the impact on generic code, unbreak non-x86
Move tboot.h from asm to linux to fix the build errors of intel_txt
patch on non-X86 platforms. Remove the tboot code from generic code
init/main.c and kernel/cpu.c.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-01 18:25:07 -07:00
Suresh Siddha
d0af9eed5a x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.

Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume)  where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.

This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).

Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.

Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.

For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-21 16:25:55 -07:00
Joseph Cihula
86886e55b2 x86, intel_txt: Intel TXT Sx shutdown support
Support for graceful handling of sleep states (S3/S4/S5) after an Intel(R) TXT launch.

Without this patch, attempting to place the system in one of the ACPI sleep
states (S3/S4/S5) will cause the TXT hardware to treat this as an attack and
will cause a system reset, with memory locked.  Not only may the subsequent
memory scrub take some time, but the platform will be unable to enter the
requested power state.

This patch calls back into the tboot so that it may properly and securely clean
up system state and clear the secrets-in-memory flag, after which it will place
the system into the requested sleep state using ACPI information passed by the kernel.

 arch/x86/kernel/smpboot.c     |    2 ++
 drivers/acpi/acpica/hwsleep.c |    3 +++
 kernel/cpu.c                  |    7 ++++++-
 3 files changed, 11 insertions(+), 1 deletion(-)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-21 11:50:04 -07:00
Linus Torvalds
31950eb66f mm/init: cpu_hotplug_init() must be initialized before SLAB
SLAB uses get/put_online_cpus() which use a mutex which is itself only
initialized when cpu_hotplug_init() is called.  Currently we hang suring
boot in SLAB due to doing that too late.

Reported by James Bottomley and Sachin Sant (and possibly others).
Debugged by Benjamin Herrenschmidt.

This just removes the dynamic initialization of the data structures, and
replaces it with a static one, avoiding this dependency entirely, and
removing one unnecessary special initcall.

Tested-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 21:18:12 -07:00
Rusty Russell
2b17fa506c cpumask: use set_cpu_active in init/main.c
cpu_active_map is deprecated in favor of cpu_active_mask, which is
const for safety: we use accessors now (set_cpu_active) is we really
want to make a change.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-30 22:05:12 +10:30
Heiko Carstens
a0e280e0f3 stop_machine/cpu hotplug: fix disable_nonboot_cpus
disable_nonboot_cpus calls _cpu_down. But _cpu_down requires that the
caller already created the stop_machine workqueue (like cpu_down does).
Otherwise a call to stop_machine will lead to accesses to random memory
regions.

When introducing this new interface (9ea09af3bd
"stop_machine: introduce stop_machine_create/destroy") I missed the second
call site of _cpu_down.
So add the missing stop_machine_create/destroy calls to disable_nonboot_cpus
as well.

Fixes suspend-to-ram/disk and also this bug:

[  286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
[  286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3
[  286.550598] Oops: 0002 [#1] SMP
[  286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5
[  286.560580] EIP: is at __stop_machine+0x88/0xe3
[  286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30
[  286.560580] Call Trace:
[  286.560580]  [<c03d04e4>] ? _cpu_down+0x10f/0x234
[  286.560580]  [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc
[  286.560580]  [<c01360c0>] ? kernel_poweroff+0x22/0x39
[  286.560580]  [<c0136301>] ? sys_reboot+0xde/0x14c
[  286.560580]  [<c01331b2>] ? complete_signal+0x179/0x191
[  286.560580]  [<c0133396>] ? send_signal+0x1cc/0x1e1
[  286.560580]  [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c
[  286.560580]  [<c0133b65>] ? group_send_signal_info+0x58/0x61
[  286.560580]  [<c0133b9e>] ? kill_pid_info+0x30/0x3a
[  286.560580]  [<c0133d49>] ? sys_kill+0x75/0x13a
[  286.560580]  [<c01a06cb>] ? mntput_no_expire+ox1f/0x101
[  286.560580]  [<c019b3b3>] ? dput+0x1e/0x105
[  286.560580]  [<c018ef87>] ?  __fput+0x150/0x158
[  286.560580]  [<c0157abf>] ? audit_syscall_entry+0x137/0x159
[  286.560580]  [<c010329f>] ? sysenter_do_call+0x12/0x34

Reported-and-tested-by: "Justin P. Mattock" <justinmattock@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 11:36:14 -08:00
Heiko Carstens
9ea09af3bd stop_machine: introduce stop_machine_create/destroy.
Introduce stop_machine_create/destroy. With this interface subsystems
that need a non-failing stop_machine environment can create the
stop_machine machine threads before actually calling stop_machine.
When the threads aren't needed anymore they can be killed with
stop_machine_destroy again.

When stop_machine gets called and the threads aren't present they
will be created and destroyed automatically. This restores the old
behaviour of stop_machine.

This patch also converts cpu hotplug to the new interface since it
is special: cpu_down calls __stop_machine instead of stop_machine.
However the kstop threads will only be created when stop_machine
gets called.

Changing the code so that the threads would be created automatically
on __stop_machine is currently not possible: when __stop_machine gets
called we hold cpu_add_remove_lock, which is the same lock that
create_rt_workqueue would take. So the workqueue needs to be created
before the cpu hotplug code locks cpu_add_remove_lock.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05 08:40:14 +10:30
Rusty Russell
e0b582ec56 cpumask: convert kernel/cpu.c
Impact: Reduce kernel stack and memory usage, use new cpumask API.

Use cpumask_var_t for take_cpu_down() stack var, and frozen_cpus.

Note that notify_cpu_starting() can be called before core_initcall
allocates frozen_cpus, but the NULL check is optimized out by gcc for
the CONFIG_CPUMASK_OFFSTACK=n case.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01 10:12:28 +10:30
Rusty Russell
3fa4152069 cpumask: make set_cpu_*/init_cpu_* out-of-line
They're only for use in boot/cpu hotplug code anyway, and this avoids
the use of deprecated cpu_*_map.

Stephen Rothwell points out that gcc 4.2.4 (on powerpc at least)
didn't like the cast away of const anyway:

  include/linux/cpumask.h: In function 'set_cpu_possible':
  include/linux/cpumask.h:1052: warning: passing argument 2 of 'cpumask_set_cpu' discards qualifiers from pointer target type

So this kills two birds with one stone.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-30 09:05:16 +10:30
Rusty Russell
b3199c025d cpumask: switch over to cpu_online/possible/active/present_mask: core
Impact: cleanup

This implements the obsolescent cpu_online_map in terms of
cpu_online_mask, rather than the other way around.  Same for the other
maps.

The documentation comments are also updated to refer to _mask rather
than _map.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-30 09:05:14 +10:30
Rusty Russell
98a79d6a50 cpumask: centralize cpu_online_map and cpu_possible_map
Impact: cleanup

Each SMP arch defines these themselves.  Move them to a central
location.

Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
   CONFIG_INIT_ALL_POSSIBLE for this rather than break them.

2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
   Those archs simply have phys_cpu_present_map replaced everywhere.

3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
   so I just manipulate them both in sync.

4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
   declarations.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
2008-12-13 21:19:41 +10:30
Al Viro
8419641450 cpuinit fixes in kernel/*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:37 -08:00
Rusty Russell
2d3854a37e cpumask: introduce new API, without changing anything
Impact: introduce new APIs

We want to deprecate cpumasks on the stack, as we are headed for
gynormous numbers of CPUs.  Eventually, we want to head towards an
undefined 'struct cpumask' so they can never be declared on stack.

1) New cpumask functions which take pointers instead of copies.
   (cpus_* -> cpumask_*)

2) Several new helpers to reduce requirements for temporary cpumasks
   (cpumask_first_and, cpumask_next_and, cpumask_any_and)

3) Helpers for declaring cpumasks on or offstack for large NR_CPUS
   (cpumask_var_t, alloc_cpumask_var and free_cpumask_var)

4) 'struct cpumask' for explicitness and to mark new-style code.

5) Make iterator functions stop at nr_cpu_ids (a runtime constant),
   not NR_CPUS for time efficiency and for smaller dynamic allocations
   in future.

6) cpumask_copy() so we can allocate less than a full cpumask eventually
   (for alloc_cpumask_var), and so we can eliminate the 'struct cpumask'
   definition eventually.

7) work_on_cpu() helper for doing task on a CPU, rather than saving old
   cpumask for current thread and manipulating it.

8) smp_call_function_many() which is smp_call_function_mask() except
   taking a cpumask pointer.

Note that this patch simply introduces the new functions and leaves
the obsolescent ones in place.  This is to simplify the transition
patches.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 09:05:33 +01:00
Ingo Molnar
990d0f2ced Merge branches 'sched/devel', 'sched/cpu-hotplug', 'sched/cpusets' and 'sched/urgent' into sched/core 2008-10-08 11:31:02 +02:00
Manfred Spraul
e545a6140b kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
Right now, there is no notifier that is called on a new cpu, before the new
cpu begins processing interrupts/softirqs.
Various kernel function would need that notification, e.g. kvm works around
by calling smp_call_function_single(), rcu polls cpu_online_map.

The patch adds a CPU_STARTING notification. It also adds a helper function
that sends the message to all cpu_chain handlers.

Tested on x86-64.
All other archs are untested. Especially on sparc, I'm not sure if I got
it right.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 19:25:24 +02:00
Manfred Spraul
3ba35573ad kernel/cpu.c: Move the CPU_DYING notifiers
When a cpu is taken offline, the CPU_DYING notifiers are called on the
dying cpu. According to <linux/notifiers.h>, the cpu should be "not
running any task, not handling interrupts, soon dead".

For the current implementation, this is not true:
- __cpu_disable can fail. If it fails, then the cpu will remain alive
  and happy.
- At least on x86, __cpu_disable() briefly enables the local interrupts
  to handle any outstanding interrupts.

What about moving CPU_DYING down a few lines, behind the __cpu_disable()
line?
There are only two CPU_DYING handlers in the kernel right now: one in
kvm, one in the scheduler. Both should work with the patch applied
[and: I'm not sure if either one handles a failing __cpu_disable()]

The patch survives simple offlining a cpu. kvm untested due to lack
of a test setup.

Signed-off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 19:13:59 +02:00
Heiko Carstens
3ee1062b4e cpu hotplug: s390 doesn't support additional_cpus anymore.
s390 doesn't support the additional_cpus kernel parameter anymore since a
long time.  So we better update the code and documentation to reflect
that.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:28 -07:00