IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The trends DROP_FULL and RAISE_FULL are not used and were never used
in the past AFAICT. Remove these conditions as they seems to not be
handled anywhere.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220629151012.3115773-2-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The code is actually clampling the next cooling device state using the
lowest and highest states of the thermal instance.
That code can be replaced by the clamp() macro which does exactly the
same. It results in a simpler routine to read.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220629151012.3115773-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The get_trend function relies on the interrupt to set the raising or
dropping trend. However the interpolated temperature is already giving
the temperature information to the thermal framework which is able to
deduce the trend.
Remove the trend code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220616202537.303655-3-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The get_trend function does already what the generic framework does.
Remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220616202537.303655-2-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is a get_trend function which is a wrapper to call a private
get_trend function. However, this private get_trend function is not
assigned anywhere.
Remove this dead code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20220616202537.303655-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add support for R-Car S4. The S4 IP differs a bit from its siblings in
such way that it has 3 out of 4 TSC nodes for Linux and the interrupts
are not routed to the INTC-AP but to the ECM.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220610201701.7946-2-wsa+renesas@sang-engineering.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When handling the V3U/r8a779a0 exception, avoid using 'not:' because
then its subschemas are far away in the 'else:' branch. Keep them
together using positive logic.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220610201701.7946-1-wsa+renesas@sang-engineering.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Convert the Qualcomm QPNP PMIC Temperature Alarm to DT Schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220608112702.80873-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When setting up a new board, a plain "Can't register thermal zone"
didn't help me much because the thermal zones in DT were all fine. I
just had a sensor entry too much in the parent TSC node. Reword the
failure/success messages to contain the sensor number to make it easier
to understand which sensor is affected. Example output now:
rcar_gen3_thermal e6198000.thermal: Sensor 0: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 1: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 2: Loaded 1 trip points
rcar_gen3_thermal e6198000.thermal: Sensor 3: Can't register thermal zone
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20220610200500.6727-1-wsa+renesas@sang-engineering.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Maintainers of the directory Documentation/devicetree/bindings/thermal
are also the maintainers of the corresponding directory
include/dt-bindings/thermal.
Add the file entry for include/dt-bindings/thermal to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613124309.28790-1-lukas.bulwahn@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Remove unneeded global variable devfreq_cooling_ops which is used only
as a copy pattern. Instead, extend the struct devfreq_cooling_device with
the needed ops structure. This also simplifies the allocation/free code
during the setup/cleanup.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-5-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The code has moved and left some comments stale. Update them where
there is a need.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-4-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Simplify the thermal_power_cpu_get_power trace event by removing
complicated cpumask and variable length array. Now the tools parsing trace
output don't have to hassle to get this power data. The simplified format
version uses 'policy->cpu'. Remove also the 'load' information completely
since there is very little value of it in this trace event. To get the
CPUs' load (or utilization) there are other dedicated trace hooks in the
kernel. This patch also simplifies and speeds-up the main cooling code
when that trace event is enabled.
Rename the trace event to avoid confusion of tools which parse the trace
file.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220613124327.30766-3-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
It is very unlikely that one CPU cluster would have the EM and some other
won't have it (because EM registration failed or DT lacks needed entry).
Although, we should avoid modifying global variable with callbacks anyway.
Redesign this and add safety for such situation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220613124327.30766-2-lukasz.luba@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The current implementation of fun_xdp_tx(), used for XPD_TX, is
incorrect in that it takes an address/length pair and later releases it
with page_frag_free(). It is OK for XDP_TX but the same code is used by
ndo_xdp_xmit. In that case it loses the XDP memory type and releases the
packet incorrectly for some of the types. Assorted breakage follows.
Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in
reclaim.
Fixes: db37bc177dae ("net/funeth: add the data path")
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Core code update:
- Non-SMP IRQ affinity fixes, allowing UP kernel to behave similarly
to SMP ones for the purpose of interrupt affinity
- Let irq_set_chip_handler_name_locked() take a const struct irq_chip *
- Tidy-up the NOMAP irqdomain API variant
- Teach action_show() to use for_each_action_of_desc()
- Make irq_chip_request_resources_parent() allow the parent callback
to be optional
- Remove dynamic allocations from populate_parent_alloc_arg()
* New drivers:
- Merge the long awaited IRQ support for the LoongArch architecture,
with the provisional ACPICA update (to be reverted once the official
support lands)
- New Renesas RZ/G2L IRQC driver, equipped with its companion GPIO
driver
* Driver updates
- Optimise the hot path operations for the SiFive PLIC, trading the
locking for per-CPU priority masking masking operations which are
apparently faster
- Work around broken PLIC implementations that deal pretty badly with
edge-triggered interrupts. Flag two implementations as affected.
- Simplify the irq-stm32-exti driver, particularly the table that
remaps the interrupts from exti to the GIC, reducing the memory usage
- Convert the ocelot irq_chip to being immutable
- Check ioremap() return value in the MIPS GIC driver
- Move MMP driver init function declarations into the common .h
- The obligatory typo fixes
-----BEGIN PGP SIGNATURE-----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=E5fZ
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip/genirq updates from Marc Zyngier:
* Core code update:
- Non-SMP IRQ affinity fixes, allowing UP kernel to behave similarly
to SMP ones for the purpose of interrupt affinity
- Let irq_set_chip_handler_name_locked() take a const struct irq_chip *
- Tidy-up the NOMAP irqdomain API variant
- Teach action_show() to use for_each_action_of_desc()
- Make irq_chip_request_resources_parent() allow the parent callback
to be optional
- Remove dynamic allocations from populate_parent_alloc_arg()
* New drivers:
- Merge the long awaited IRQ support for the LoongArch architecture,
with the provisional ACPICA update (to be reverted once the official
support lands)
- New Renesas RZ/G2L IRQC driver, equipped with its companion GPIO
driver
* Driver updates
- Optimise the hot path operations for the SiFive PLIC, trading the
locking for per-CPU priority masking masking operations which are
apparently faster
- Work around broken PLIC implementations that deal pretty badly with
edge-triggered interrupts. Flag two implementations as affected.
- Simplify the irq-stm32-exti driver, particularly the table that
remaps the interrupts from exti to the GIC, reducing the memory usage
- Convert the ocelot irq_chip to being immutable
- Check ioremap() return value in the MIPS GIC driver
- Move MMP driver init function declarations into the common .h
- The obligatory typo fixes
Link: https://lore.kernel.org/all/20220727192356.1860546-1-maz@kernel.org
Changes to hrtimer mode (potentially made by __hrtimer_init_sleeper on
PREEMPT_RT) are not visible to hrtimer_start_range_ns, thus not
accounted for by hrtimer_start_expires call paths. In particular,
__wait_event_hrtimeout suffers from this problem as we have, for
example:
fs/aio.c::read_events
wait_event_interruptible_hrtimeout
__wait_event_hrtimeout
hrtimer_init_sleeper_on_stack <- this might "mode |= HRTIMER_MODE_HARD"
on RT if task runs at RT/DL priority
hrtimer_start_range_ns
WARN_ON_ONCE(!(mode & HRTIMER_MODE_HARD) ^ !timer->is_hard)
fires since the latter doesn't see the change of mode done by
init_sleeper
Fix it by making __wait_event_hrtimeout call hrtimer_sleeper_start_expires,
which is aware of the special RT/DL case, instead of hrtimer_start_range_ns.
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20220627095051.42470-1-juri.lelli@redhat.com
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmLhWF0ACgkQqDIjiipP
6E+ziAgArY8BJ/09w4rt63LDO5nynorr0+Uuf0E9hCmc0KzRsSF3hO39EcuLj1zD
ubKKSXwaOucAcRYj7gCeqaSk/IOs9EmwESRVtLLIwEwYsg44iC1vmq4pJ8cX66qN
h5TqkOiq77fPIY3BR/nSFxddmlU2farO8oSUqdLNsVrqoIq2rttaQYADdYGa4LYn
dvQHEmh6jvJRoZM3aR6It0EWM7pyHKxAWFChWv+SbikheDCgIcugz+FUTy9lyhmf
39wLm2srmrCLbjaGdJnyc38/y/UPIJ0aqeSf7XSiHTWQ+dfNBfdbrmPTSJHiyIt+
iPrlx0ShvrMXeOxgbSxse53e+9Q88w==
=ApcN
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.20-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the missing DT bindings for the MTU nomadik timer (Linus
Walleij)
- Fix grammar typo in the ARM global timer Kconfig option (Randy
Dunlap)
- Add the tegra186 timer and use it on the tegra234 board (Thierry
Reding)
- Add the 'CPUXGPT' CPU timer for Mediatek MT6795 and implement a
workaround to overcome an ATF bug where the timer is not correctly
initialized (AngeloGioacchino Del Regno)
- Rework the suspend/resume approach to enable the feature on the
timer even it is not an active clock and fix a compilation warning
(Claudiu Beznea)
- Add the Add R-Car Gen4 timer support along with the DT bindings
(Wolfram Sang)
- Add compatible for ti,am654-timer to support AM6 SoC (Tony Lindgren)
- Fix Kconfig option to put it back to 'bool' instead of 'tristate'
for the tegra186 (Daniel Lezcano)
- Sort 'family,type' DT bindings for the Renesas timers (Geert
Uytterhoeven)
- Add compatible 'allwinner,sun20i-d1-timer' for Allwinner D1 (Samuel
Holland)
- Remove unnecessary (void*) conversions for sun4i (XU pengfei)
- Remove unnecessary (void*) conversions for sun5i (Li zeming)
Link: https://lore.kernel.org/all/7472984e-f502-5f27-82bf-070127dd85a5@linaro.org
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A NULL pointer dereference was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__list_del_entry_valid+0x26/0x80
Call Trace:
<TASK>
sctp_sched_dequeue_common+0x1c/0x90
sctp_sched_prio_dequeue+0x67/0x80
__sctp_outq_teardown+0x299/0x380
sctp_outq_free+0x15/0x20
sctp_association_free+0xc3/0x440
sctp_do_sm+0x1ca7/0x2210
sctp_assoc_bh_rcv+0x1f6/0x340
This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.
As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.
Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The crc16() function is used to check the firmware validity, but
the library was not explicitly selected.
Fixes: 3c3673bde50c ("ptp: ocp: Add firmware header checks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vadfed@fb.com>
Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Douglas Anderson <dianders@chromium.org>:
The main goal of this series is to make a small dent in cleaning up
the way we deal with regulator loads. The idea is to add some extra
functionality to the regulator "bulk" API so that consumers can
specify the load using that.
Local variable 'p' is initialized by an address of field of acpi_resource,
so it does not make sense to compare 'p' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the blamed commit, IPv4 SYN packets handled
by a dual stack IPv6 socket are dropped, even if
perfectly valid.
$ nstat | grep MD5
TcpExtTCPMD5Failure 5 0.0
For a dual stack listener, an incoming IPv4 SYN packet
would call tcp_inbound_md5_hash() with @family == AF_INET,
while tp->af_specific is pointing to tcp_sock_ipv6_specific.
Only later when an IPv4-mapped child is created, tp->af_specific
is changed to tcp_sock_ipv6_mapped_specific.
Fixes: 7bbb765b7349 ("net/tcp: Merge TCP-MD5 inbound callbacks")
Reported-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
added a check to determine whether arm_dma_zone_size is exceeding the
amount of kernel virtual address space available between the upper 4GB
virtual address limit and PAGE_OFFSET in order to provide a suitable
definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual
address space. The quantity used for comparison was off by a missing
trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit
quantity.
This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform
where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value
of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being
0x1_0000_0000 which overflows the unsigned long type used throughout
__pa() and then __virt_addr_valid(). Because the virtual address passed
to __virt_addr_valid() would now be 0, the function would loudly warn
and flood the kernel log, thus making the platform unable to boot
properly.
Fixes: 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure
for the perf tool on mips and possibly others.
-----BEGIN PGP SIGNATURE-----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=2fva
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"Two more bug fixes for asm-generic, one addressing an incorrect
Kconfig symbol reference and another one fixing a build failure for
the perf tool on mips and possibly others"
* tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: remove a broken and needless ifdef conditional
tools: Fixed MIPS builds due to struct flock re-definition
One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address
-----BEGIN PGP SIGNATURE-----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=n1qH
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of changes for the soc tree:
- fix clock frequency on lan966x
- fix incorrect GPIO numbers on some pxa machines
- update Baolin's email address"
* tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa2xx: Fix GPIO descriptor tables
mailmap: update Baolin Wang's email
ARM: dts: lan966x: fix sys_clk frequency
This reverts commit 007faec014cb5d26983c1f86fd08c6539b41392e.
Now that hyperv does its own protocol negotiation:
49d6a3c062a1 ("x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM")
revert this exposure of the sev_es_ghcb_hv_call() helper.
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by：Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
- yet another duplicate ID quirk (Tobias Gruetzmacher)
-----BEGIN PGP SIGNATURE-----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=SvWf
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.19-2022-07-27' of git://git.infradead.org/nvme into block-5.19
Pull NVMe fix from Christoph:
"nvme fix for Linux 5.19
- yet another duplicate ID quirk (Tobias Gruetzmacher)"
* tag 'nvme-5.19-2022-07-27' of git://git.infradead.org/nvme:
nvme-pci: Crucial P2 has bogus namespace ids
Allwinner D1 contains the usual sun4i MMIO timer device. It contains two
timers like other recent SoCs, so it is compatible with the A23 variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220725051715.56427-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220726115937.101432-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Restore sort order (by family, followed by type).
Update the conditional sections specifying the number of interrupts.
Fixes: 525b296185b4b0ab ("dt-bindings: timer: renesas,cmt: Add r8a779f0 and generic Gen4 CMT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2e3863ae32e17d49f41111580f195dd34e2b769d.1658303544.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The clocksources are built-in, they are not modules. We don't know if
the core time framework is ready for clockevents / clocksources as
modules.
Revert back this option to 'bool'.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220718213657.1303538-1-daniel.lezcano@linaro.org
The clocksource drivers do not currently have loadable modules as
pointed out by Daniel Lezcano <daniel.lezcano@linaro.org>.
Let's reconsider this later on once timer removal discussion has been
done, and set timer-ti-dm to bool for TI K3 SoC.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220523151448.23732-1-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatible for ti,am654-timer to support the timers. For example, am654
has four timers in the MCU domain and 12 timers in the MAIN domain.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-4-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's make timer-ti-dm selectable for ARCH_K3, and add a separate option
for OMAP_DM_SYSTIMER as there should be no need for it on ARCH_K3.
For older TI SoCs, we are already selecting OMAP_DM_TIMER in
arch/arm/mach-omap*/Kconfig. For mach-omap2, we need to now also select
OMAP_DM_SYSTIMER.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-3-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The __omap_dm_timer_* inline functions in the header are no longer needed
outside the driver, and the header ifdefs prevent the driver working for
ARCH_K3.
Let's move the inline functions to the driver and drop the ifdefs and
drop the unused functions __omap_dm_timer_override_errata() and
__omap_dm_timer_load_start().
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220408101715.43697-2-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We want to use all optimisations that we have for io_uring requests like
completion batching, memory caching and more but for zc notifications.
Fortunately, notification perfectly fit the request model so we can
overlay them onto struct io_kiocb and use all the infratructure.
Most of the fields of struct io_notif natively fits into io_kiocb, so we
replace struct io_notif with struct io_kiocb carrying struct
io_notif_data in the cmd cache line. Then we adapt io_alloc_notif() to
use io_alloc_req()/io_alloc_req_refill(), and kill leftovers of hand
coded caching. __io_notif_complete_tw() is converted to use io_uring's
tw infra.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9e010125175e80baf51f0ca63bdc7cc6a4a9fa56.1658913593.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bpf_perf_object__next() folded the last element in the list test with the
empty list test. However, this meant that offsets were computed against
null and that a struct list_head was compared against a 'struct
bpf_perf_object'.
Working around this with clang's undefined behavior sanitizer required
-fno-sanitize=null and -fno-sanitize=object-size.
Remove the undefined behavior by using the regular Linux list APIs and
handling the starting case separately from the end testing case.
Looking at uses like bpf_perf_object__for_each(), as the constant NULL
or non-NULL argument can be constant propagated, the code is no less
efficient.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20220726220921.2567761-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some symbols are observed with the 'st_value' field zeroed. E.g.
libc.so.6 in Ubuntu contains a symbol '__evoke_link_warning_getwd' which
resides in the '.gnu.warning.getwd' section.
Unlike normal sections, such kind of sections are used for linker
warning when a file calls deprecated functions, but they are not part of
memory images, the symbols in these sections should be dropped.
This patch checks the section attribute SHF_ALLOC bit, if the bit is not
set, it skips symbols to avoid spurious ones.
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chang Rui <changruinj@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols. This is a common
issue on both x86 and Arm64 platforms.
Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:
...
Disassembly of section .bss:
0000000000004040 <completed.0>:
...
0000000000004080 <buf1>:
...
00000000000040c0 <buf2>:
...
0000000000004100 <thread>:
...
First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.
# ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf2 0x30a8-0x30e8
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf1 0x3068-0x30a8
...
The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section. The perf tool uses below formula to convert
a symbol's memory address to a file address:
file_address = st_value - sh_addr + sh_offset
^
` Memory address
We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.
The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.
Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info. A better choice for converting
memory address to file address is using the formula:
file_address = st_value - p_vaddr + p_offset
This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.
After applying the change:
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf2 0x30c0-0x3100
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf1 0x3080-0x30c0
...
Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mainline kernel can be used for relative old distros, e.g. RHEL 7.
The distro doesn't upgrade from python2 to python3, this causes the
building error that the python script is not python2 compliant.
To fix the building failure, this patch changes from the python f-string
format to traditional string format.
Fixes: 12fdd6c009da0d02 ("perf scripts python: Support Arm CoreSight trace data disassembly")
Reported-by: Akemi Yagi <toracat@elrepo.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: ElRepo <contact@elrepo.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220725104220.1106663-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
