IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This set of changes contains some preparatory work that is shared by
several branches and trees to support DVFS via power domains.
There's also a bit of cleanup and improvements to reboot on chips that
use PSCI.
-----BEGIN PGP SIGNATURE-----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=f+T3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gToI
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.17-rc1
This set of changes contains some preparatory work that is shared by
several branches and trees to support DVFS via power domains.
There's also a bit of cleanup and improvements to reboot on chips that
use PSCI.
* tag 'tegra-for-5.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Rename core power domain
soc/tegra: pmc: Rename 3d power domains
soc/tegra: regulators: Prepare for suspend
soc/tegra: fuse: Use resource-managed helpers
soc/tegra: fuse: Reset hardware
soc/tegra: pmc: Add reboot notifier
soc/tegra: Don't print error message when OPPs not available
Link: https://lore.kernel.org/r/20211217162253.1801077-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is an assortment of driver patches that rely on some of the changes
in the for-5.17/soc branch. These have all been acked by the respective
maintainers and go through the Tegra tree to more easily handle the
build dependency.
-----BEGIN PGP SIGNATURE-----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=YfSG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAbq4ACgkQmmx57+YA
GNncmhAAgYwqoRCobfEDxMm+4zjFoimuZWynahKG0c/t7GcFfBQVIh4uLmTLd0bm
8sjGW7R9BcNRtbI5ZX2buN5LpZ5qDk/HAoNA+QhgWwHuLS4/FHx2bOnYOfvCWKdK
elXfI8SaZ3l5DClasvt865niELpj95PHEN2Yr3CqOircgGApazN/GkrefNj3v+YL
UqhDNW2XhUKjdKddBXH9n8SftHHdc9CP61c8zNUql7CikpzPAfh/ZjBuxqwF5NtZ
C7XaH9uRVr6v/rWl7T5+YSSgXkZFBH/D6NWFg+VVVkZwoZJDHuPY0yv3JwBDxzQL
F7WNWxT7fZrXBjFxVvQGLvP5kab4RV4nZAwkwalOZQ7EmtqpKmtwurOh/X8qGbmk
IpqeprisWVeUuRQxS3vARMRr9Xvf4yRQ+Z0AIW0u/eadVrpboXvHKQZpxfviA8v2
tITsOHVB8/3hFt7t6FGMdaQhnp8Nsk9WNUv8zDwpa5cNoItZST9t0sXh+XnBKJ7N
5WH83w64N/fBuFs1/c4A3MUP+GX7V7p3IoJIQZYFLRokXz3meuw9fGjQJZWAb+Mv
OiWjQS1rUAJl81hU1KWXDelHJ1vg8DMZu1MrLmw4PzgtFq8yy8HICxLuwZdcvDhR
0A8/ue+5r++XtYAfj+euhrUvNVKYXa5M9Th7LtSeATjX5r0D4UU=
=lWBt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
drivers: Changes for v5.17-rc1
This is an assortment of driver patches that rely on some of the changes
in the for-5.17/soc branch. These have all been acked by the respective
maintainers and go through the Tegra tree to more easily handle the
build dependency.
* tag 'tegra-for-5.17-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
media: staging: tegra-vde: Support generic power domain
spi: tegra20-slink: Add OPP support
mtd: rawnand: tegra: Add runtime PM and OPP support
mmc: sdhci-tegra: Add runtime PM and OPP support
pwm: tegra: Add runtime PM and OPP support
bus: tegra-gmi: Add runtime PM and OPP support
usb: chipidea: tegra: Add runtime PM and OPP support
soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
soc/tegra: Enable runtime PM during OPP state-syncing
Link: https://lore.kernel.org/r/20211217162253.1801077-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CORE power domain uses name of device-tree node, which is inconsistent with
the names of PMC domains. Set the name to "core" to make it consistent.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Device-tree schema doesn't allow domain name to start with a number.
We don't use 3d domain yet in device-trees, so rename it to the name
used by Tegra TRMs: TD, TD2.
Reported-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GENPD core now can set up domain's performance state properly while device
is RPM-suspended. Runtime PM of a device must be enabled during setup
because GENPD checks whether device is suspended and check doesn't work
while RPM is disabled. Instead of replicating the boilerplate RPM-enable
code around OPP helper for each driver, let's make OPP helper to take care
of enabling it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Depending on hardware version, Tegra SoC may require a higher voltages
during resume from system suspend, otherwise hardware will crash. Set
SoC voltages to a nominal levels during suspend.
Link: https://lore.kernel.org/all/a8280b5b-7347-8995-c97b-10b798cdf057@gmail.com/
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use resource-managed helpers to make code cleaner and more correct,
properly releasing all resources in case of driver probe error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The FUSE controller is enabled at a boot time. Reset it in order to put
hardware and clock into clean and disabled state.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC driver implements a restart handler that supports Tegra
specific reboot commands such as placing the device into 'recovery' mode
in order to reprogram the platform. This is accomplished by setting the
appropriate bit in the PMC scratch0 register prior to rebooting the
platform.
For Tegra platforms that support PSCI or EFI, the default Tegra restart
handler is not called and the PSCI or EFI restart handler is called
instead. Hence, for Tegra platforms that support PSCI or EFI, the Tegra
specific reboot commands do not currently work. Fix this by moving the
code that programs the PMC scratch0 register into a separate reboot
notifier that will always be called on reboot.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously we assumed that devm_tegra_core_dev_init_opp_table() will
be used only by drivers that will always have device with OPP table,
but this is not true anymore. For example now Tegra30 will have OPP table
for PWM, but Tegra20 not and both use the same driver. Hence let's not
print the error message about missing OPP table in the common helper,
we can print it elsewhere.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since devm_ioremap_resource() function return error pointers.
The pktdma_get_regs() function does not return NULL, It return error
pointers too. Using IS_ERR() to check the return value to fix this.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211214015544.7270-1-linmq006@gmail.com
* Adds an auto-PM feature that is necessary for a single device
* Disables module builds, which were broken anyway
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYbnTUgAKCRClhN6SrnTN
2B28AP9KqcASRLcJ8dHSv+ILmHQimW6/AeUuhuwkGjk9tRRFgQEAqDsHYL/hFlUe
ayxR7RTLhlZUowdRHqzsAtI6mYyzEwE=
=wksk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WaN0
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-pmgr-5.17-v2' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC PMGR driver updates for 5.17
* Adds an auto-PM feature that is necessary for a single device
* Disables module builds, which were broken anyway
* tag 'asahi-soc-pmgr-5.17-v2' of https://github.com/AsahiLinux/linux:
soc: apple: apple-pmgr-pwrstate: Do not build as a module
soc: apple: apple-pmgr-pwrstate: Add auto-PM min level support
Link: https://lore.kernel.org/r/660f6f7f-0857-b54c-c415-79bcb93f0e02@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This doesn't make any sense as a module since it is a critical device,
and it turns out of_phandle_iterator_args was not exported so the module
version doesn't build anyway.
Fixes: 6df9d38f9146 ("soc: apple: Add driver for Apple PMGR power state controls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7f+wAKCRClhN6SrnTN
2Bk7AP42vfTQXHQVxtCnvivhc6m+P4z6sULPTqOWN4oPPcudSQEAkAjUeC2IFdQ3
4XovFzUZb7R8E7in7OpYxXyVAK5/eQY=
=xoPm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmG4YSgACgkQmmx57+YA
GNnhlBAApQWuzm72VJr4QXEO+fI5rfiNE3+OZmJa1EF8dWLrDJMgpPj/dRCB1GX7
+ssYXySIq6kZ+XzKpW9GkBLefjlIgBSl2/Vf3jlojEBwiff2wgYG2gvVs4q0VguD
kU2aNT4mSV8/d7mw/QvKBESYQ6IuZ0bqDYBd9OEOI6uayXskrCX3bjhFw4dgQ5Cs
fdzW30v2ZRW14unBTIZW7ghx2vdhdW0AtJG9dOsTTHkzXTvr7fjCb/DzqnS431cf
wPFeC6Io4irLk82pwyOUiUeEaztL8AoZrRMkFOgJmc1K4zFBO1IZfWm/PIVclrqJ
VM61n1SRW7Q0Xb7OPJhNAfJBPCmYX8ezUr64rhG5VYZhrYx73wWUfmYQaovBZtnE
/zome7Y/Q2Ya9WD2wxlFUcnf9H58TziinSzYD0cKk0cmI1IRFr4ppnyqFWwNiesq
lyQH1ILiWHGC3fzfNaaKFLbN54E/Y8TQtjYM/mATUjAksq7UWSj+H5G6g2mdb3OP
LiIiUy5NW37DrUrqzB/8p+YtRX2X3IKgRDiBDeGFbIw+bzz987gWDMWxb1520Q0e
bkDWUrNLPWQOC/SLmo+bsdWVjSIlQvIr/pLqHvcX51bwLGo/JpkNyhHO0CMFYXxR
SZO7uKp4d1IM2E/tZ/uwpSGkGpiZXRB9UcdiFyZ3k5KXMTjsP7A=
=lrwu
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC PMGR driver for 5.17
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
* tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux:
soc: apple: Add driver for Apple PMGR power state controls
Link: https://lore.kernel.org/r/049f4de9-51be-7be4-1f9a-a59756af88d7@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is seemingly required for DCP/DCPEXT, without which they refuse to
boot properly. They need to be set to minimum state 4 (clock gated).
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Replace container_of for converting a generic_pm_domain to a
zynqmp_pm_domain with a macro definition to simplify the code.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-5-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Instead of defining a flags field and a single bit in this field to
signal that a PM node has been requested, use a boolean field with a
descriptive name.
No functional change, but using a proper name instead of flags makes the
code easier to read.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-4-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use dev_err/dev_dbg instead of pr_err/pr_debug.
Add the PM node ids to supplement the (arbitrary) power domain names to
include information which PM nodes are requested by the driver.
Drop function names from the messages, because they can easily be added
with dynamic debug.
Remove comments explaining that error messages are printed on errors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-3-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
PM_INIT_FINALIZE tells the PMU FW that Linux is able to handle the power
management nodes that are provided by the PMU FW. Nodes that are not
requested are shut down after this call.
Calling PM_INIT_FINALIZE from the zynqmp_power driver is wrong. The PM
node request mechanism is implemented in the zynqmp_pm_domains driver,
which must also call PM_INIT_FINALIZE.
Due to the behavior of the PMU FW, all devices must be powered up before
PM_INIT_FINALIZE is called, because otherwise the devices might
misbehave. Calling PM_INIT_FINALIZE from the sync_state device callback
ensures that all users probed successfully before the PMU FW is allowed
to power off unused domains.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-2-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add support for R-Car S4-8 (R8A779F0) to the R-Car RST driver.
The register map of R-Car S4-8 is the same as R-Car V3U so that
renames "V3U" and "r8a779a0" to "Gen4".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-11-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implements genpd and reset providers for downstream devices. Each
instance of the driver binds to a single register and represents a
single SoC power domain.
The driver does not currently implement all features (clockgate-only
state, misc flags), but we declare the respective registers for
documentation purposes. These features will be added as they become
useful for downstream devices.
This also creates the apple/soc tree and Kconfig submenu.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Currently renesas_soc_init() scans the whole device tree up to three
times, to find a device node describing a product register.
Furthermore, the product register handling for the different variants is
very similar, with the major difference being the location of the
product bitfield inside the product register.
Reduce scanning to a single pass using of_find_matching_node_and_match()
instead. Switch to a common handling of product registers, by storing
the intrinsics of each product register type in the data field of the
corresponding match entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/057721f46c7499de4133135488f0f3da7fb39265.1636570669.git.geert+renesas@glider.be
R-Car Gen3 SoC series has a realtime processor, the boot
address of this processor can be set thanks to CR7BAR register
of the reset module.
Export this function so that it's possible to set the boot
address from a remoteproc driver.
Also drop the __initdata qualifier on rcar_rst_base,
since we will use this address later than init time.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Link: https://lore.kernel.org/r/20211022122101.66998-1-julien.massot@iot.bzh
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is one set of fixes for the NXP/FSL DPAA2 drivers, addressing
a few minor issues. I received these just after sending out the
last v5.15 fixes, and nothing in here seemed urgent enough for
a quick follow-up.
-----BEGIN PGP SIGNATURE-----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=u3qO
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is one set of fixes for the NXP/FSL DPAA2 drivers, addressing a
few minor issues. I received these just after sending out the last
v5.15 fixes, and nothing in here seemed urgent enough for a quick
follow-up"
* tag 'arm-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read
soc: fsl: dpio: use the combined functions to protect critical zone
soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id
The wkup_m3_rproc_boot_thread() function uses a nonstandard prototype,
which broke after Eric's recent cleanup:
drivers/soc/ti/wkup_m3_ipc.c: In function 'wkup_m3_rproc_boot_thread':
drivers/soc/ti/wkup_m3_ipc.c:429:16: error: 'return' with a value, in function returning void [-Werror=return-type]
429 | return 0;
| ^
drivers/soc/ti/wkup_m3_ipc.c:416:13: note: declared here
416 | static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Change it to the normal prototype as it should have been from the
start.
Fixes: 111e70490d2a ("exit/kthread: Have kernel threads return instead of calling do_exit")
Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20211105075119.2327190-1-arnd@kernel.org
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
These are all the driver updates for SoC specific drivers. There
are a couple of subsystems with individual maintainers picking up
their patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this
tree this time. There are only minor changes, but they depend
on other tegra driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process.
This depends on a small sound driver change that is included
here as well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains
a mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for
the "Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed
BMCs, something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better suspend/resume
support
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx, layerscape,
allwinner, broadcom, and omap.
-----BEGIN PGP SIGNATURE-----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=tUuj
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest. Note that a few changes in the
unusual places like arch/sh are included, which are a part of ASoC DAI
format cleanups.
ALSA core:
- Continued memallloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU
-----BEGIN PGP SIGNATURE-----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=UBNY
-----END PGP SIGNATURE-----
Merge tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
In 2009 Oleg reworked[1] the kernel threads so that it is not
necessary to call do_exit if you are not using kthread_stop(). Remove
the explicit calls of do_exit and complete_and_exit (with a NULL
completion) that were previously necessary.
[1] 63706172f332 ("kthreads: rework kthread_stop()")
Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on
other architectures, but this causes a Kconfig warning
for QCOM_SPM:
WARNING: unmet direct dependencies detected for QCOM_SPM
Depends on [n]: ARCH_QCOM [=n]
Selected by [y]:
- ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
Make it possible to also compile-test this one, which can
be done now that v5.15-rc5 lets you select QCOM_SCM everywhere.
Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Fixes: 498ba2a8a275 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
-----BEGIN PGP SIGNATURE-----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=NTMF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HxRd
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver updates for v5.16
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: qcom: smp2p: add feature negotiation and ssr ack feature support
soc: qcom: Add Sleep stats driver
dt-bindings: Introduce QCOM Sleep stats bindings
soc: qcom: socinfo: add two missing PMIC IDs
soc: qcom: rpmhpd: Make power_on actually enable the domain
soc: qcom: smem: Support reserved-memory description
dt-bindings: soc: smem: Make indirection optional
dt-bindings: sram: Document qcom,rpm-msg-ram
Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=ZJb8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y2Ab
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.16
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: add exynosautov9 SoC support
rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
soc: samsung: exynos-chipid: Add Exynos850 support
dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
soc: samsung: exynos-chipid: Pass revision reg offsets
soc: samsung: pm_domains: drop unused is_off field
arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
soc: samsung: exynos-chipid: do not enforce built-in
soc: samsung: exynos-chipid: convert to a module
soc: samsung: exynos-chipid: avoid soc_device_to_device()
soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE
Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
-----BEGIN PGP SIGNATURE-----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=r7vf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF3+W4ACgkQJNaLcl1U
h9C+DQf7Bxzz7xjGv5AFyZ8eZbAx0LnTBp9SytON2gh5mxWGUCI0kxSdnEd/ot9u
PUhWMf7192kQw4qmkZArdtKiaxhZdKZvXZ0kTfyoTvcR4o9fdgWtMUla5QhBVzAu
UgZbTH91wDt4P68cYzLrhG8gFlagzSwRT8WF4imJmcJsehPq22Nz70tK5tSePZko
KcbnpkqYV19CQRJsEKXBivAptpE/oAQJBSoYVw/gkizqrznNGI2cqWBl+krGOdBW
zI+CZbzuAwTi9xNu3tmlcgPDGxOHYFVU7aIy2w/ENNRsAbWgFThcO25pWBKROtKc
45uC5fj24R6cCCyuygwFJuLoeRy31Q==
=ts3p
-----END PGP SIGNATURE-----
Merge tag '20210927135559.738-6-srinivas.kandagatla@linaro.org' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into v11_20211026_srinivas_kandagatla_asoc_qcom_add_audioreach_support for audioreach support
v5.15-rc1 + 20210927135559.738-[23456]-srinivas.kandagatla@linaro.org
This immutable branch is based on v5.15-rc1 and contains the following
patches extending the existig APR driver to also implement GPR:
20210927135559.738-2-srinivas.kandagatla@linaro.org20210927135559.738-3-srinivas.kandagatla@linaro.org20210927135559.738-4-srinivas.kandagatla@linaro.org20210927135559.738-5-srinivas.kandagatla@linaro.org20210927135559.738-6-srinivas.kandagatla@linaro.org
The product id of Exynos Auto v9 is "0xAAA8_0000". Add this id and its
name.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-2-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fix following coccicheck warning:
./drivers/soc/qcom/smp2p.c:501:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014062350.8942-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 834735662602 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
Add driver support for the UART routing control. Users can perform
runtime configuration of the RX muxes among the UART controllers and
the UART IO pins.
The sysfs interface is also exported for the convenience of routing paths
check and update.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20210927023053.6728-5-chiawei_wang@aspeedtech.com
Link: https://lore.kernel.org/r/20211022000616.481772-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
