IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The MSI restore function will become a function pointer in an
x86_msi_ops struct. It defaults to the implementation in the
io_apic.c and msi.c. We piggyback on the indirection mechanism
introduced by "x86: Introduce x86_msi_ops".
Cc: x86@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Use "do { } while(0)" for empty lock_cmos()/unlock_cmos() macros
x86: Use "do { } while(0)" for empty flush_tlb_fix_spurious_fault() macro
x86, CPU: Drop superfluous get_cpu_cap() prototype
arch/x86/mm/pageattr.c: Quiet sparse noise; local functions should be static
arch/x86/kernel/ptrace.c: Quiet sparse noise
x86: Use kmemdup() in copy_thread(), rather than duplicating its implementation
x86: Replace the EVT_TO_HPET_DEV() macro with an inline function
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86: Fix atomic64_xxx_cx8() functions
x86: Fix and improve cmpxchg_double{,_local}()
x86_64, asm: Optimise fls(), ffs() and fls64()
x86, bitops: Move fls64.h inside __KERNEL__
x86: Fix and improve percpu_cmpxchg{8,16}b_double()
x86: Report cpb and eff_freq_ro flags correctly
x86/i386: Use less assembly in strlen(), speed things up a bit
x86: Use the same node_distance for 32 and 64-bit
x86: Fix rflags in FAKE_STACK_FRAME
x86: Clean up and extend do_int3()
x86: Call do_notify_resume() with interrupts enabled
x86/div64: Add a micro-optimization shortcut if base is power of two
x86-64: Cleanup some assembly entry points
x86-64: Slightly shorten line system call entry and exit paths
x86-64: Reduce amount of redundant code generated for invalidate_interruptNN
x86-64: Slightly shorten int_ret_from_sys_call
x86, efi: Convert efi_phys_get_time() args to physical addresses
x86: Default to vsyscall=emulate
x86-64: Set siginfo and context on vsyscall emulation faults
x86: consolidate xchg and xadd macros
...
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Skip cpus with apic-ids >= 255 in !x2apic_mode
x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping
x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present
x86, apic: Add probe() for apic_flat
x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
x86: Add per-cpu stat counter for APIC ICR read tries
pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86
x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support
x86: Add NumaChip support
x86: Add x86_init platform override to fix up NUMA core numbering
x86: Make flat_init_apic_ldr() available
This factors out the AMD native MMCONFIG discovery so we can use it
outside amd_bus.c.
amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the
PCI resources. We may also need the MMCONFIG information to work
around BIOS defects in the ACPI MCFG table.
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org # 2.6.34+
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.
The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
perf kvm: Fix copy & paste error in description
perf script: Kill script_spec__delete
perf top: Fix a memory leak
perf stat: Introduce get_ratio_color() helper
perf session: Remove impossible condition check
perf tools: Fix feature-bits rework fallout, remove unused variable
perf script: Add generic perl handler to process events
perf tools: Use for_each_set_bit() to iterate over feature flags
perf tools: Unify handling of features when writing feature section
perf report: Accept fifos as input file
perf tools: Moving code in some files
perf tools: Fix out-of-bound access to struct perf_session
perf tools: Continue processing header on unknown features
perf tools: Improve macros for struct feature_ops
perf: builtin-record: Document and check that mmap_pages must be a power of two.
perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
perf tools: Fix truncated annotation
perf script: look up thread using tid instead of pid
perf tools: Look up thread names for system wide profiling
perf tools: Fix comm for processes with named threads
...
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
cpu: Export cpu_up()
rcu: Apply ACCESS_ONCE() to rcu_boost() return value
Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
docs: Additional LWN links to RCU API
rcu: Augment rcu_batch_end tracing for idle and callback state
rcu: Add rcutorture tests for srcu_read_lock_raw()
rcu: Make rcutorture test for hotpluggability before offlining CPUs
driver-core/cpu: Expose hotpluggability to the rest of the kernel
rcu: Remove redundant rcu_cpu_stall_suppress declaration
rcu: Adaptive dyntick-idle preparation
rcu: Keep invoking callbacks if CPU otherwise idle
rcu: Irq nesting is always 0 on rcu_enter_idle_common
rcu: Don't check irq nesting from rcu idle entry/exit
rcu: Permit dyntick-idle with callbacks pending
rcu: Document same-context read-side constraints
rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
rcu: Remove dynticks false positives and RCU failures
rcu: Reduce latency of rcu_prepare_for_idle()
rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
rcu: Avoid needlessly IPIing CPUs at GP end
...
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
memblock: Reimplement memblock allocation using reverse free area iterator
memblock: Kill early_node_map[]
score: Use HAVE_MEMBLOCK_NODE_MAP
s390: Use HAVE_MEMBLOCK_NODE_MAP
mips: Use HAVE_MEMBLOCK_NODE_MAP
ia64: Use HAVE_MEMBLOCK_NODE_MAP
SuperH: Use HAVE_MEMBLOCK_NODE_MAP
sparc: Use HAVE_MEMBLOCK_NODE_MAP
powerpc: Use HAVE_MEMBLOCK_NODE_MAP
memblock: Implement memblock_add_node()
memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users
memblock: Track total size of regions automatically
powerpc: Cleanup memblock usage
memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove()
memblock: Make memblock functions handle overflowing range @size
memblock: Reimplement __memblock_remove() using memblock_isolate_range()
memblock: Separate out memblock_isolate_range() from memblock_set_node()
memblock: Kill memblock_init()
memblock: Kill sentinel entries at the end of static region arrays
memblock: Add __memblock_dump_all()
...
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This has not been used for some years now. It's time to remove it.
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the x2apic mode is disabled for reasons like interrupt-remapping
not available etc, then we need to skip the logical cpu bringup of
apic-id's >= 255. Otherwise as the platform is in xapic mode, init/startup
IPI's will consider only the low 8-bits and there is a possibility of
re-sending init/startup IPI's to the logical cpu that is already online.
This will avoid potential reboots/unpredictable behavior etc.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20111222014632.702932458@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently "nox2apic" boot parameter was not enabling x2apic mode if the cpu,
kernel are all capable of enabling x2apic mode and the OS handover
happened in xapic mode.
However If the bios enabled x2apic prior to OS handover, using "nox2apic"
boot parameter had no effect.
If the boot cpu's apicid is < 255, enable "nox2apic" boot parameter to
disable the x2apic mode setup by the bios. This will enable the kernel to
fallback to xapic mode and bringup only the cpu's which has apic-id < 255.
-v2: fix patch error and two compiling warning
make disable_x2apic to be __init
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/CAE9FiQUeB-3uxJAMiHsz=uPWoFv5Hg1pVepz7aU6YtqOxMC-=Q@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
On some of the recent Intel SNB platforms, by default bios is pre-enabling
x2apic mode in the cpu with out setting up interrupt-remapping.
This case was resulting in the kernel to panic as the cpu is already in
x2apic mode but the OS was not able to enable interrupt-remapping (which
is a pre-req for using x2apic capability).
On these platforms all the apic-ids are < 255 and the kernel can fallback to
xapic mode if the bios has not enabled interrupt-remapping (which is
mostly the case if the bios has not exported interrupt-remapping tables to the
OS).
Reported-by: Berck E. Nash <flyboy@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.600418637@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
If the x2apic feature is not present (either the cpu is not capable of it
or the user has disabled the feature using boot-parameter etc), ignore the
x2apic MADT and SRAT entries provided by the ACPI tables.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.540896503@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently we start with the default apic_flat mode and switch to some other
apic model depending on the apic drivers acpi_madt_oem_check() routines and
later followed by the apic drivers probe() routines.
Once we selected non flat mode there was no case where we fall back to
flat mode again.
Upcoming changes allow bios-enabled x2apic mode to be disabled by the OS
if interrupt-remapping etc is not setup properly by the bios.
We now has a case for the apic to fall back to legacy flat mode during
apic driver probe() seqeuence. Add a simple flat_probe() which allows
the apic_flat mode to be the last fallback option.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.484984298@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Use raw_spin_unlock_irqrestore() as equivalent to
raw_spin_lock_irqsave().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1324646665-13334-1-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sysdev.h file should not be needed by any in-kernel code, so remove
the .h file from these random files that seem to still want to include
it.
The sysdev code will be going away soon, so this include needs to be
removed no matter what.
Cc: Jiandong Zheng <jdzheng@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "Venkatesh Pallipadi
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem
and converts the devices to regular devices. The sysdev drivers are
implemented as subsystem interfaces now.
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.
Userspace relies on events and generic sysfs subsystem infrastructure
from sysdev devices, which are made available with this conversion.
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Len Brown <lenb@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mathieu Desnoyers pointed out a case that can cause issues with
NMIs running on the debug stack:
int3 -> interrupt -> NMI -> int3
Because the interrupt changes the stack, the NMI will not see that
it preempted the debug stack. Looking deeper at this case,
interrupts only happen when the int3 is from userspace or in
an a location in the exception table (fixup).
userspace -> int3 -> interurpt -> NMI -> int3
All other int3s that happen in the kernel should be processed
without ever enabling interrupts, as the do_trap() call will
panic the kernel if it is called to process any other location
within the kernel.
Adding a counter around the sections that enable interrupts while
using the debug stack allows the NMI to also check that case.
If the NMI sees that it either interrupted a task using the debug
stack or the debug counter is non-zero, then it will have to
change the IDT table to make the int3 not change stacks (which will
corrupt the stack if it does).
Note, I had to move the debug_usage functions out of processor.h
and into debugreg.h because of the static inlined functions to
inc and dec the debug_usage counter. __get_cpu_var() requires
smp.h which includes processor.h, and would fail to build.
Link: http://lkml.kernel.org/r/1323976535.23971.112.camel@gandalf.stny.rr.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Turner <pjt@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With i386, NMIs and breakpoints use the current stack and they
do not reset the stack pointer to a fix point that might corrupt
a previous NMI or breakpoint (as it does in x86_64). But NMIs are
still not made to be re-entrant, and need to prevent the case that
an NMI hitting a breakpoint (which does an iret), doesn't allow
another NMI to run.
The fix is to let the NMI be in 3 different states:
1) not running
2) executing
3) latched
When no NMI is executing on a given CPU, the state is "not running".
When the first NMI comes in, the state is switched to "executing".
On exit of that NMI, a cmpxchg is performed to switch the state
back to "not running" and if that fails, the NMI is restarted.
If a breakpoint is hit and does an iret, which re-enables NMIs,
and another NMI comes in before the first NMI finished, it will
detect that the state is not in the "not running" state and the
current NMI is nested. In this case, the state is switched to "latched"
to let the interrupted NMI know to restart the NMI handler, and
the nested NMI exits without doing anything.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Turner <pjt@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We want to allow NMI handlers to have breakpoints to be able to
remove stop_machine from ftrace, kprobes and jump_labels. But if
an NMI interrupts a current breakpoint, and then it triggers a
breakpoint itself, it will switch to the breakpoint stack and
corrupt the data on it for the breakpoint processing that it
interrupted.
Instead, have the NMI check if it interrupted breakpoint processing
by checking if the stack that is currently used is a breakpoint
stack. If it is, then load a special IDT that changes the IST
for the debug exception to keep the same stack in kernel context.
When the NMI is done, it puts it back.
This way, if the NMI does trigger a breakpoint, it will keep
using the same stack and not stomp on the breakpoint data for
the breakpoint it interrupted.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In x86, when an NMI goes off, the CPU goes into an NMI context that
prevents other NMIs to trigger on that CPU. If an NMI is suppose to
trigger, it has to wait till the previous NMI leaves NMI context.
At that time, the next NMI can trigger (note, only one more NMI will
trigger, as only one can be latched at a time).
The way x86 gets out of NMI context is by calling iret. The problem
with this is that this causes problems if the NMI handle either
triggers an exception, or a breakpoint. Both the exception and the
breakpoint handlers will finish with an iret. If this happens while
in NMI context, the CPU will leave NMI context and a new NMI may come
in. As NMI handlers are not made to be re-entrant, this can cause
havoc with the system, not to mention, the nested NMI will write
all over the previous NMI's stack.
Linus Torvalds proposed the following workaround to this problem:
https://lkml.org/lkml/2010/7/14/264
"In fact, I wonder if we couldn't just do a software NMI disable
instead? Hav ea per-cpu variable (in the _core_ percpu areas that get
allocated statically) that points to the NMI stack frame, and just
make the NMI code itself do something like
NMI entry:
- load percpu NMI stack frame pointer
- if non-zero we know we're nested, and should ignore this NMI:
- we're returning to kernel mode, so return immediately by using
"popf/ret", which also keeps NMI's disabled in the hardware until the
"real" NMI iret happens.
- before the popf/iret, use the NMI stack pointer to make the NMI
return stack be invalid and cause a fault
- set the NMI stack pointer to the current stack pointer
NMI exit (not the above "immediate exit because we nested"):
clear the percpu NMI stack pointer
Just do the iret.
Now, the thing is, now the "iret" is atomic. If we had a nested NMI,
we'll take a fault, and that re-does our "delayed" NMI - and NMI's
will stay masked.
And if we didn't have a nested NMI, that iret will now unmask NMI's,
and everything is happy."
I first tried to follow this advice but as I started implementing this
code, a few gotchas showed up.
One, is accessing per-cpu variables in the NMI handler.
The problem is that per-cpu variables use the %gs register to get the
variable for the given CPU. But as the NMI may happen in userspace,
we must first perform a SWAPGS to get to it. The NMI handler already
does this later in the code, but its too late as we have saved off
all the registers and we don't want to do that for a disabled NMI.
Peter Zijlstra suggested to keep all variables on the stack. This
simplifies things greatly and it has the added benefit of cache locality.
Two, faulting on the iret.
I really wanted to make this work, but it was becoming very hacky, and
I never got it to be stable. The iret already had a fault handler for
userspace faulting with bad segment registers, and getting NMI to trigger
a fault and detect it was very tricky. But for strange reasons, the system
would usually take a double fault and crash. I never figured out why
and decided to go with a simple "jmp" approach. The new approach I took
also simplified things.
Finally, the last problem with Linus's approach was to have the nested
NMI handler do a ret instead of an iret to give the first NMI NMI-context
again.
The problem is that ret is much more limited than an iret. I couldn't figure
out how to get the stack back where it belonged. I could have copied the
current stack, pushed the return onto it, but my fear here is that there
may be some place that writes data below the stack pointer. I know that
is not something code should depend on, but I don't want to chance it.
I may add this feature later, but for now, an NMI handler that loses NMI
context will not get it back.
Here's what is done:
When an NMI comes in, the HW pushes the interrupt stack frame onto the
per cpu NMI stack that is selected by the IST.
A special location on the NMI stack holds a variable that is set when
the first NMI handler runs. If this variable is set then we know that
this is a nested NMI and we process the nested NMI code.
There is still a race when this variable is cleared and an NMI comes
in just before the first NMI does the return. For this case, if the
variable is cleared, we also check if the interrupted stack is the
NMI stack. If it is, then we process the nested NMI code.
Why the two tests and not just test the interrupted stack?
If the first NMI hits a breakpoint and loses NMI context, and then it
hits another breakpoint and while processing that breakpoint we get a
nested NMI. When processing a breakpoint, the stack changes to the
breakpoint stack. If another NMI comes in here we can't rely on the
interrupted stack to be the NMI stack.
If the variable is not set and the interrupted task's stack is not the
NMI stack, then we know this is the first NMI and we can process things
normally. But in order to do so, we need to do a few things first.
1) Set the stack variable that tells us that we are in an NMI handler
2) Make two copies of the interrupt stack frame.
One copy is used to return on iret
The other is used to restore the first one if we have a nested NMI.
This is what the stack will look like:
+-------------------------+
| original SS |
| original Return RSP |
| original RFLAGS |
| original CS |
| original RIP |
+-------------------------+
| temp storage for rdx |
+-------------------------+
| NMI executing variable |
+-------------------------+
| Saved SS |
| Saved Return RSP |
| Saved RFLAGS |
| Saved CS |
| Saved RIP |
+-------------------------+
| copied SS |
| copied Return RSP |
| copied RFLAGS |
| copied CS |
| copied RIP |
+-------------------------+
| pt_regs |
+-------------------------+
The original stack frame contains what the HW put in when we entered
the NMI.
We store %rdx as a temp variable to use. Both the original HW stack
frame and this %rdx storage will be clobbered by nested NMIs so we
can not rely on them later in the first NMI handler.
The next item is the special stack variable that is set when we execute
the rest of the NMI handler.
Then we have two copies of the interrupt stack. The second copy is
modified by any nested NMIs to let the first NMI know that we triggered
a second NMI (latched) and that we should repeat the NMI handler.
If the first NMI hits an exception or breakpoint that takes it out of
NMI context, if a second NMI comes in before the first one finishes,
it will update the copied interrupt stack to point to a fix up location
to trigger another NMI.
When the first NMI calls iret, it will instead jump to the fix up
location. This fix up location will copy the saved interrupt stack back
to the copy and execute the nmi handler again.
Note, the nested NMI knows enough to check if it preempted a previous
NMI handler while it is in the fixup location. If it has, it will not
modify the copied interrupt stack and will just leave as if nothing
happened. As the NMI handle is about to execute again, there's no reason
to latch now.
To test all this, I forced the NMI handler to call iret and take itself
out of NMI context. I also added assemble code to write to the serial to
make sure that it hits the nested path as well as the fix up path.
Everything seems to be working fine.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Turner <pjt@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus cleaned up the NMI handler but it still needs some comments to
explain why it uses save_paranoid but not paranoid_exit. Just to keep
others from adding that in the future, document why it's not used.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The NMI handler uses the paranoid_exit routine that checks the
NEED_RESCHED flag, and if it is set and the return is for userspace,
then interrupts are enabled, the stack is swapped to the thread's stack,
and schedule is called. The problem with this is that we are still in an
NMI context until an iret is executed. This means that any new NMIs are
now starved until an interrupt or exception occurs and does the iret.
As NMIs can not be masked and can interrupt any location, they are
treated as a special case. NEED_RESCHED should not be set in an NMI
handler. The interruption by the NMI should not disturb the work flow
for scheduling. Any IPI sent to a processor after sending the
NEED_RESCHED would have to wait for the NMI anyway, and after the IPI
finishes the schedule would be called as required.
There is no reason to do anything special leaving an NMI. Remove the
call to paranoid_exit and do a simple return. This not only fixes the
bug of starved NMIs, but it also cleans up the code.
Link: http://lkml.kernel.org/r/CA+55aFzgM55hXTs4griX5e9=v_O+=ue+7Rj0PTD=M7hFYpyULQ@mail.gmail.com
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Turner <pjt@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add event maps for Intel x86 processors (with architected PMU v2 or later).
On AMD, there is frequency scaling but no Turbo. There is no core
cycle event not subject to frequency scaling, therefore we do not
provide a mapping.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323559734-3488-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the encoding and definitions necessary for the
unhalted_reference_cycles event avaialble since Intel Core 2 processors.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323559734-3488-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space. However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files. The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:
text data bss dec hex filename
4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before
4737444 506459 972040 6215943 5ed907 vmlinux.o.after
for a difference of 276 bytes for an example UP config.
If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When printing the code bytes in show_registers(), the markers around the
byte at the fault address could make the printk() format string look
like a valid log level and facility code. This would prevent this byte
from being printed and result in a spurious newline:
[ 7555.765589] Code: 8b 32 e9 94 00 00 00 81 7d 00 ff 00 00 00 0f 87 96 00 00 00 48 8b 83 c0 00 00 00 44 89 e2 44 89 e6 48 89 df 48 8b 80 d8 02 00 00
[ 7555.765683] 8b 48 28 48 89 d0 81 e2 ff 0f 00 00 48 c1 e8 0c 48 c1 e0 04
Add KERN_CONT where needed, and elsewhere in show_registers() for
consistency.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Link: http://lkml.kernel.org/r/4EEFA7AE.9020407@ladisch.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LAPIC related statistics are grouped inside the per-cpu
structure irq_stat, so there is no need for icr_read_retry_count
to be a standalone per-cpu variable.
This patch moves icr_read_retry_count to where it belongs.
Suggested-y: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mce-inject provides a mechanism to simulate errors so that test
scripts can check for correct operation of the kernel without
requiring any specialized hardware to create rare events.
The existing code can simulate events in normal process context
and also in NMI context - but not in IRQ context. This patch
fills that gap.
Link: https://lkml.org/lkml/2011/12/7/537
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
My box with following cpuinfo needs the cx8 enabling still:
vendor_id : CentaurHauls
cpu family : 6
model : 13
model name : VIA Eden Processor 1200MHz
stepping : 0
cpu MHz : 1199.940
cache size : 128 KB
This fixes valgrind to work on my box (it requires and checks
cx8 from cpuinfo).
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Link: http://lkml.kernel.org/r/1323961888-10223-1-git-send-email-timo.teras@iki.fi
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add the flags to get rid of the [9] and [10] feature names
in cpuinfo's 'power management' fields and replace them with
meaningful names.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1323875574-17881-1-git-send-email-joerg.roedel@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thermal throttle and power limit events are not defined as MCE errors in x86
architecture and should not generate MCE errors in mcelog.
Current kernel generates fake software defined MCE errors for these events.
This may confuse users because they may think the machine has real MCE errors
while actually only thermal throttle or power limit events happen.
To make it worse, buggy firmware on some platforms may falsely generate
the events. Therefore, kernel reports MCE errors which users think as real
hardware errors. Although the firmware bugs should be fixed, on the other hand,
kernel should not report MCE errors either.
So mcelog is not a good mechanism to report these events. To report the events, we count them in respective counters (core_power_limit_count,
package_power_limit_count, core_throttle_count, and package_throttle_count) in
/sys/devices/system/cpu/cpu#/thermal_throttle/. Users can check the counters
for each event on each CPU. Please note that all CPU's on one package report
duplicate counters. It's user application's responsibity to retrieve a package
level counter for one package.
This patch doesn't report package level power limit, core level power limit, and
package level thermal throttle events in mcelog. When the events happen, only
report them in respective counters in sysfs.
Since core level thermal throttle has been legacy code in kernel for a while and
users accepted it as MCE error in mcelog, core level thermal throttle is still
reported in mcelog. In the mean time, the event is counted in a counter in sysfs
as well.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Borislav Petkov <bp@amd64.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20111215001945.GA21009@linux-os.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add a function which drains whatever MCEs were logged in already during
boot and before the decoder chains were registered.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Once we've found and validated the ucode patch for the current CPU,
there's no need to iterate over the remaining patches in the binary
image. Exit then and save us a bunch of cycles.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Basically, what we did until now is take out a chunk of the firmware
image, vmalloc space for it and inspect it before application. And
repeat.
This patch changes all that so that we look at each ucode patch from
the firmware image, check it for sanity and copy it to local buffer for
application only once and if it passes all checks. Thus, vmalloc-ing for
each piece is gone, we can do proper size checking only of the patch
which is destined for the CPU of the current machine instead of each
single patch, which is clearly wrong.
Oh yeah, simplify and cleanup the code while at it, along with adding
comments as to what actually happens.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add a simple 4K page which gets allocated on driver init and freed on
driver exit instead of vmalloc'ing small buffers for each ucode patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
