Commit Graph

45 Commits

Author SHA1 Message Date
Roberto Sassu
b6c0dec9f7 integrity: Remove LSM
Since now IMA and EVM use their own integrity metadata, it is safe to
remove the 'integrity' LSM, with its management of integrity metadata.

Keep the iint.c file only for loading IMA and EVM keys at boot, and for
creating the integrity directory in securityfs (we need to keep it for
retrocompatibility reasons).

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-02-15 23:43:48 -05:00
Linus Torvalds
8f6f76a6a2 As usual, lots of singleton and doubleton patches all over the tree and
there's little I can say which isn't in the individual changelogs.
 
 The lengthier patch series are
 
 - "kdump: use generic functions to simplify crashkernel reservation in
   arch", from Baoquan He.  This is mainly cleanups and consolidation of
   the "crashkernel=" kernel parameter handling.
 
 - After much discussion, David Laight's "minmax: Relax type checks in
   min() and max()" is here.  Hopefully reduces some typecasting and the
   use of min_t() and max_t().
 
 - A group of patches from Oleg Nesterov which clean up and slightly fix
   our handling of reads from /proc/PID/task/...  and which remove
   task_struct.therad_group.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
 jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
 63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
 =On4u
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "As usual, lots of singleton and doubleton patches all over the tree
  and there's little I can say which isn't in the individual changelogs.

  The lengthier patch series are

   - 'kdump: use generic functions to simplify crashkernel reservation
     in arch', from Baoquan He. This is mainly cleanups and
     consolidation of the 'crashkernel=' kernel parameter handling

   - After much discussion, David Laight's 'minmax: Relax type checks in
     min() and max()' is here. Hopefully reduces some typecasting and
     the use of min_t() and max_t()

   - A group of patches from Oleg Nesterov which clean up and slightly
     fix our handling of reads from /proc/PID/task/... and which remove
     task_struct.thread_group"

* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
  scripts/gdb/vmalloc: disable on no-MMU
  scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
  .mailmap: add address mapping for Tomeu Vizoso
  mailmap: update email address for Claudiu Beznea
  tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
  .mailmap: map Benjamin Poirier's address
  scripts/gdb: add lx_current support for riscv
  ocfs2: fix a spelling typo in comment
  proc: test ProtectionKey in proc-empty-vm test
  proc: fix proc-empty-vm test with vsyscall
  fs/proc/base.c: remove unneeded semicolon
  do_io_accounting: use sig->stats_lock
  do_io_accounting: use __for_each_thread()
  ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
  ocfs2: fix a typo in a comment
  scripts/show_delta: add __main__ judgement before main code
  treewide: mark stuff as __ro_after_init
  fs: ocfs2: check status values
  proc: test /proc/${pid}/statm
  compiler.h: move __is_constexpr() to compiler.h
  ...
2023-11-02 20:53:31 -10:00
Amir Goldstein
e044374a8a ima: annotate iint mutex to avoid lockdep false positive warnings
It is not clear that IMA should be nested at all, but as long is it
measures files both on overlayfs and on underlying fs, we need to
annotate the iint mutex to avoid lockdep false positives related to
IMA + overlayfs, same as overlayfs annotates the inode mutex.

Reported-and-tested-by: syzbot+b42fe626038981fb7bfa@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2023-10-31 08:20:09 -04:00
Alexey Dobriyan
68279f9c9f treewide: mark stuff as __ro_after_init
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.

Also, mark some stuff as "const" and "__init" while I'm at it.

[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18 14:43:23 -07:00
Tianjia Zhang
9df6a4870d integrity: Fix possible multiple allocation in integrity_inode_get()
When integrity_inode_get() is querying and inserting the cache, there
is a conditional race in the concurrent environment.

The race condition is the result of not properly implementing
"double-checked locking". In this case, it first checks to see if the
iint cache record exists before taking the lock, but doesn't check
again after taking the integrity_iint_lock.

Fixes: bf2276d10c ("ima: allocating iint improvements")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2023-06-01 07:25:04 -04:00
Roberto Sassu
b7c1ae4bcc Revert "integrity: double check iint_cache was initialized"
With the recent introduction of LSM_ORDER_LAST, the 'integrity' LSM is
always initialized (if selected in the kernel configuration) and the
iint_cache is always created (the kernel panics on error). Thus, the
additional check of iint_cache in integrity_inode_get() is no longer
necessary. If the 'integrity' LSM is not selected in the kernel
configuration, integrity_inode_get() just returns NULL.

This reverts commit 92063f3ca7.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 18:33:52 -05:00
Roberto Sassu
42994ee3cd security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.

Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.

Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.

Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.

Fixes: 79f7865d84 ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 18:31:35 -05:00
Roberto Sassu
aa2ead71d9 evm: Load EVM key in ima_load_x509() to avoid appraisal
The public builtin keys do not need to be appraised by IMA as the
restriction on the IMA/EVM trusted keyrings ensures that a key can be
loaded only if it is signed with a key on the builtin or secondary
keyrings.

However, when evm_load_x509() is called, appraisal is already enabled and
a valid IMA signature must be added to the EVM key to pass verification.

Since the restriction is applied on both IMA and EVM trusted keyrings, it
is safe to disable appraisal also when the EVM key is loaded. This patch
calls evm_load_x509() inside ima_load_x509() if CONFIG_IMA_LOAD_X509 is
enabled, which crosses the normal IMA and EVM boundary.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-21 12:47:04 -04:00
Jiele Zhao
282c0a4d15 integrity: Add declarations to init_once void arguments.
init_once is a callback to kmem_cache_create. The parameter
type of this function is void *, so it's better to give a
explicit cast here.

Signed-off-by: Jiele Zhao <unclexiaole@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-04-09 12:17:52 -04:00
Mimi Zohar
92063f3ca7 integrity: double check iint_cache was initialized
The kernel may be built with multiple LSMs, but only a subset may be
enabled on the boot command line by specifying "lsm=".  Not including
"integrity" on the ordered LSM list may result in a NULL deref.

As reported by Dmitry Vyukov:
in qemu:
qemu-system-x86_64       -enable-kvm     -machine q35,nvdimm -cpu
max,migratable=off -smp 4       -m 4G,slots=4,maxmem=16G        -hda
wheezy.img      -kernel arch/x86/boot/bzImage   -nographic -vga std
 -soundhw all     -usb -usbdevice tablet  -bt hci -bt device:keyboard
   -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net
nic,model=virtio-net-pci   -object
memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M
  -device nvdimm,id=nvdimm1,memdev=pmem1  -append "console=ttyS0
root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1
panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8"   -pidfile
vm_pid -m 2G -cpu host

But it crashes on NULL deref in integrity_inode_get during boot:

Run /sbin/init as init process
BUG: kernel NULL pointer dereference, address: 000000000000001c
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ #97
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920
Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b
3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f
1c 4cf
RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000
RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627
R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40
R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff
FS:  0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 integrity_inode_get+0x47/0x260 security/integrity/iint.c:105
 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237
 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474
 security_bprm_check+0x7d/0xa0 security/security.c:845
 search_binary_handler fs/exec.c:1708 [inline]
 exec_binprm fs/exec.c:1761 [inline]
 bprm_execve fs/exec.c:1830 [inline]
 bprm_execve+0x764/0x19a0 fs/exec.c:1792
 kernel_execve+0x370/0x460 fs/exec.c:1973
 try_to_run_init_process+0x14/0x4e init/main.c:1366
 kernel_init+0x11d/0x1b8 init/main.c:1477
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Modules linked in:
CR2: 000000000000001c
---[ end trace 22d601a500de7d79 ]---

Since LSMs and IMA may be configured at build time, but not enabled at
run time, panic the system if "integrity" was not initialized before use.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 79f7865d84 ("LSM: Introduce "lsm=" for boottime LSM selection")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-03-22 14:54:11 -04:00
Christoph Hellwig
a1f9b1c043 integrity/ima: switch to using __kernel_read
__kernel_read has a bunch of additional sanity checks, and this moves
the set_fs out of non-core code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-08 08:27:57 +02:00
Thomas Gleixner
b886d83c5b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:17 +02:00
Linus Torvalds
736706bee3 get rid of legacy 'get_ds()' function
Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function).  It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.

Which in the kernel is always KERNEL_DS.

Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.

Roughly scripted with

   git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
   git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'

plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.

The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.

Inspired-by: Jann Horn <jannh@google.com>
Inspired-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04 10:50:14 -08:00
Paul Gortmaker
876979c930 security: audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.

Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-12-12 14:58:51 -08:00
Kees Cook
07aed2f2af LSM: Record LSM name in struct lsm_info
In preparation for making LSM selections outside of the LSMs, include
the name of LSMs in struct lsm_info.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-10 20:40:22 -07:00
Kees Cook
3d6e5f6dcf LSM: Convert security_initcall() into DEFINE_LSM()
Instead of using argument-based initializers, switch to defining the
contents of struct lsm_info on a per-LSM basis. This also drops
the final use of the now inaccurate "initcall" naming.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-10 20:40:21 -07:00
Kees Cook
5b89c1bd4c LSM: Convert from initcall to struct lsm_info
In preparation for doing more interesting LSM init probing, this converts
the existing initcall system into an explicit call into a function pointer
from a section-collected struct lsm_info array.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-10-10 20:40:21 -07:00
Sudeep Holla
ac2409a521 integrity: silence warning when CONFIG_SECURITYFS is not enabled
When CONFIG_SECURITYFS is not enabled, securityfs_create_dir returns
-ENODEV which throws the following error:
	"Unable to create integrity sysfs dir: -19"

However, if the feature is disabled, it can't be warning and hence
we need to silence the error. This patch checks for the error -ENODEV
which is returned when CONFIG_SECURITYFS is disabled to stop the error
being thrown.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-07-18 07:27:22 -04:00
Matthew Garrett
0c343af806 integrity: Add an integrity directory in securityfs
We want to add additional evm control nodes, and it'd be preferable not
to clutter up the securityfs root directory any further. Create a new
integrity directory, move the ima directory into it, create an evm
directory for the evm attribute and add compatibility symlinks.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-05-17 08:03:07 -04:00
Matthew Garrett
d906c10d8a IMA: Support using new creds in appraisal policy
The existing BPRM_CHECK functionality in IMA validates against the
credentials of the existing process, not any new credentials that the
child process may transition to. Add an additional CREDS_CHECK target
and refactor IMA to pass the appropriate creds structure. In
ima_bprm_check(), check with both the existing process credentials and
the credentials that will be committed when the new process is started.
This will not change behaviour unless the system policy is extended to
include CREDS_CHECK targets - BPRM_CHECK will continue to check the same
credentials that it did previously.

After this patch, an IMA policy rule along the lines of:

measure func=CREDS_CHECK subj_type=unconfined_t

will trigger if a process is executed and runs as unconfined_t, ignoring
the context of the parent process. This is in contrast to:

measure func=BPRM_CHECK subj_type=unconfined_t

which will trigger if the process that calls exec() is already executing
in unconfined_t, ignoring the context that the child process executes
into.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Changelog:
- initialize ima_creds_status
2018-03-23 06:31:11 -04:00
Mimi Zohar
e2598077dc ima: re-initialize iint->atomic_flags
Intermittently security.ima is not being written for new files.  This
patch re-initializes the new slab iint->atomic_flags field before
freeing it.

Fixes: commit 0d73a55208 ("ima: re-introduce own integrity cache lock")
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2018-02-02 21:03:08 +11:00
Jeff Layton
02c324a55e integrity: remove unneeded initializations in integrity_iint_cache entries
The init_once routine memsets the whole object to 0, and then
explicitly sets some of the fields to 0 again. Just remove the explicit
initializations.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-18 09:43:49 -05:00
Dmitry Kasatkin
0d73a55208 ima: re-introduce own integrity cache lock
Before IMA appraisal was introduced, IMA was using own integrity cache
lock along with i_mutex. process_measurement and ima_file_free took
the iint->mutex first and then the i_mutex, while setxattr, chmod and
chown took the locks in reverse order. To resolve the potential deadlock,
i_mutex was moved to protect entire IMA functionality and the redundant
iint->mutex was eliminated.

Solution was based on the assumption that filesystem code does not take
i_mutex further. But when file is opened with O_DIRECT flag, direct-io
implementation takes i_mutex and produces deadlock. Furthermore, certain
other filesystem operations, such as llseek, also take i_mutex.

More recently some filesystems have replaced their filesystem specific
lock with the global i_rwsem to read a file.  As a result, when IMA
attempts to calculate the file hash, reading the file attempts to take
the i_rwsem again.

To resolve O_DIRECT related deadlock problem, this patch re-introduces
iint->mutex. But to eliminate the original chmod() related deadlock
problem, this patch eliminates the requirement for chmod hooks to take
the iint->mutex by introducing additional atomic iint->attr_flags to
indicate calling of the hooks. The allowed locking order is to take
the iint->mutex first and then the i_rwsem.

Original flags were cleared in chmod(), setxattr() or removwxattr()
hooks and tested when file was closed or opened again. New atomic flags
are set or cleared in those hooks and tested to clear iint->flags on
close or on open.

Atomic flags are following:
* IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown,
  chgrp) and file attributes have changed. On file open, it causes IMA
  to clear iint->flags to re-evaluate policy and perform IMA functions
  again.
* IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called
  and extended attributes have changed. On file open, it causes IMA to
  clear iint->flags IMA_DONE_MASK to re-appraise.
* IMA_UPDATE_XATTR - indicates that security.ima needs to be updated.
  It is cleared if file policy changes and no update is needed.
* IMA_DIGSIG - indicates that file security.ima has signature and file
  security.ima must not update to file has on file close.
* IMA_MUST_MEASURE - indicates the file is in the measurement policy.

Fixes: Commit 6552321831 ("xfs: remove i_iolock and use i_rwsem in
the VFS inode instead")

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-11 17:20:47 -05:00
Christoph Hellwig
a7d3d0392a integrity: use kernel_read_file_from_path() to read x509 certs
The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.

This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08 15:16:36 -05:00
Thiago Jung Bauermann
bb543e3959 integrity: Small code improvements
These changes are too small to warrant their own patches:

The keyid and sig_size members of struct signature_v2_hdr are in BE format,
so use a type that makes this assumption explicit. Also, use beXX_to_cpu
instead of __beXX_to_cpu to read them.

Change integrity_kernel_read to take a void * buffer instead of char *
buffer, so that callers don't have to use a cast if they provide a buffer
that isn't a char *.

Add missing #endif comment in ima.h pointing out which macro it refers to.

Add missing fall through comment in ima_appraise.c.

Constify mask_tokens and func_tokens arrays.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-06-21 14:37:12 -04:00
Eric Richter
96d450bbec integrity: add measured_pcrs field to integrity cache
To keep track of which measurements have been extended to which PCRs, this
patch defines a new integrity_iint_cache field named measured_pcrs. This
field is a bitmask of the PCRs measured. Each bit corresponds to a PCR
index. For example, bit 10 corresponds to PCR 10.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:19 -04:00
Mimi Zohar
c6af8efe97 ima: remove firmware and module specific cached status info
Each time a file is read by the kernel, the file should be re-measured and
the file signature re-appraised, based on policy.  As there is no need to
preserve the status information, this patch replaces the firmware and
module specific cache status with a generic one named read_file.

This change simplifies adding support for other files read by the kernel.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-21 09:06:13 -05:00
Linus Torvalds
5807fcaa9b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - EVM gains support for loading an x509 cert from the kernel
   (EVM_LOAD_X509), into the EVM trusted kernel keyring.

 - Smack implements 'file receive' process-based permission checking for
   sockets, rather than just depending on inode checks.

 - Misc enhancments for TPM & TPM2.

 - Cleanups and bugfixes for SELinux, Keys, and IMA.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
  selinux: Inode label revalidation performance fix
  KEYS: refcount bug fix
  ima: ima_write_policy() limit locking
  IMA: policy can be updated zero times
  selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
  selinux: export validatetrans decisions
  gfs2: Invalid security labels of inodes when they go invalid
  selinux: Revalidate invalid inode security labels
  security: Add hook to invalidate inode security labels
  selinux: Add accessor functions for inode->i_security
  security: Make inode argument of inode_getsecid non-const
  security: Make inode argument of inode_getsecurity non-const
  selinux: Remove unused variable in selinux_inode_init_security
  keys, trusted: seal with a TPM2 authorization policy
  keys, trusted: select hash algorithm for TPM2 chips
  keys, trusted: fix: *do not* allow duplicate key options
  tpm_ibmvtpm: properly handle interrupted packet receptions
  tpm_tis: Tighten IRQ auto-probing
  tpm_tis: Refactor the interrupt setup
  tpm_tis: Get rid of the duplicate IRQ probing code
  ...
2016-01-17 19:13:15 -08:00
Al Viro
cc4e719e83 fix the leak in integrity_read_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:28:19 -05:00
Dmitry Kasatkin
2ce523eb89 evm: load an x509 certificate from the kernel
This patch defines a configuration option and the evm_load_x509() hook
to load an X509 certificate onto the EVM trusted kernel keyring.

Changes in v4:
* Patch description updated

Changes in v3:
* Removed EVM_X509_PATH definition. CONFIG_EVM_X509_PATH is used
  directly.

Changes in v2:
* default key patch changed to /etc/keys

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 08:31:19 -05:00
Dmitry Kasatkin
9d03a721a3 integrity: add validity checks for 'path' parameter
This patch adds validity checks for 'path' parameter and
makes it const.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-05-21 13:59:28 -04:00
Dmitry Kasatkin
6fb5032ebb VFS: refactor vfs_read()
integrity_kernel_read() duplicates the file read operations code
in vfs_read(). This patch refactors vfs_read() code creating a
helper function __vfs_read(). It is used by both vfs_read() and
integrity_kernel_read().

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:14:22 -05:00
Dmitry Kasatkin
c9cd2ce2bc integrity: provide a hook to load keys when rootfs is ready
Keys can only be loaded once the rootfs is mounted. Initcalls
are not suitable for that. This patch defines a special hook
to load the x509 public keys onto the IMA keyring, before
attempting to access any file. The keys are required for
verifying the file's signature. The hook is called after the
root filesystem is mounted and before the kernel calls 'init'.

Changes in v3:
* added more explanation to the patch description (Mimi)

Changes in v2:
* Hook renamed as 'integrity_load_keys()' to handle both IMA and EVM
  keys by integrity subsystem.
* Hook patch moved after defining loading functions

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:01 -05:00
Dmitry Kasatkin
e3c4abbfa9 integrity: define a new function integrity_read_file()
This patch defines a new function called integrity_read_file()
to read file from the kernel into a buffer. Subsequent patches
will read a file containing the public keys and load them onto
the IMA keyring.

This patch moves and renames ima_kernel_read(), the non-security
checking version of kernel_read(), to integrity_kernel_read().

Changes in v3:
* Patch descriptions improved (Mimi)
* Add missing cast (kbuild test robot)

Changes in v2:
* configuration option removed
* function declared as '__init'

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:09:18 -05:00
Dmitry Kasatkin
0f34a0060a ima: check ima_policy_flag in the ima_file_free() hook
This patch completes the switching to the 'ima_policy_flag' variable
in the checks at the beginning of IMA functions, starting with the
commit a756024e.

Checking 'iint_initialized' is completely unnecessary, because
S_IMA flag is unset if iint was not allocated. At the same time
the integrity cache is allocated with SLAB_PANIC and the kernel will
panic if the allocation fails during kernel initialization. So on
a running system iint_initialized is always true and can be removed.

Changes in v3:
* not limiting test to IMA_APPRAISE (spotted by Roberto Sassu)

Changes in v2:
* 'iint_initialized' removal patch merged to this patch (requested
   by Mimi)

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Acked-by: Roberto Sassu <roberto.sassu@polito.it>
2014-10-07 14:32:52 -04:00
Dmitry Kasatkin
2bb930abcf integrity: fix checkpatch errors
Between checkpatch changes (eg. sizeof) and inconsistencies between
Lindent and checkpatch, unfixed checkpatch errors make it difficult
to see new errors. This patch fixes them. Some lines with over 80 chars
remained unchanged to improve code readability.

The "extern" keyword is removed from internal evm.h to make it consistent
with internal ima.h.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-03-07 12:15:45 -05:00
Dmitry Kasatkin
a35c3fb649 ima: use dynamically allocated hash storage
For each inode in the IMA policy, an iint is allocated.  To support
larger hash digests, the iint digest size changed from 20 bytes to
the maximum supported hash digest size.  Instead of allocating the
maximum size, which most likely is not needed, this patch dynamically
allocates the needed hash storage.

Changelog:
- fix krealloc bug

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-10-25 17:17:00 -04:00
Mimi Zohar
d79d72e024 ima: per hook cache integrity appraisal status
With the new IMA policy 'appraise_type=' option, different hooks
can require different methods for appraising a file's integrity.

For example, the existing 'ima_appraise_tcb' policy defines a
generic rule, requiring all root files to be appraised, without
specfying the appraisal method.  A more specific rule could require
all kernel modules, for example, to be signed.

appraise fowner=0 func=MODULE_CHECK appraise_type=imasig
appraise fowner=0

As a result, the integrity appraisal results for the same inode, but
for different hooks, could differ.  This patch caches the integrity
appraisal results on a per hook basis.

Changelog v2:
- Rename ima_cache_status() to ima_set_cache_status()
- Rename and move get_appraise_status() to ima_get_cache_status()
Changelog v0:
- include IMA_APPRAISE/APPRAISED_SUBMASK in IMA_DO/DONE_MASK (Dmitry)
- Support independent MODULE_CHECK appraise status.
- fixed IMA_XXXX_APPRAISE/APPRAISED flags

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2013-01-22 16:10:36 -05:00
Dmitry Kasatkin
a10bf26b2f ima: replace iint spinblock with rwlock/read_lock
For performance, replace the iint spinlock with rwlock/read_lock.

Eric Paris questioned this change, from spinlocks to rwlocks, saying
"rwlocks have been shown to actually be slower on multi processor
systems in a number of cases due to the cache line bouncing required."

Based on performance measurements compiling the kernel on a cold
boot with multiple jobs with/without this patch, Dmitry Kasatkin
and I found that rwlocks performed better than spinlocks, but very
insignificantly.  For example with total compilation time around 6
minutes, with rwlocks time was 1 - 3 seconds shorter... but always
like that.

Changelog v2:
- new patch taken from the 'allocating iint improvements' patch

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2012-09-07 14:57:46 -04:00
Dmitry Kasatkin
bf2276d10c ima: allocating iint improvements
With IMA-appraisal's removal of the iint mutex and taking the i_mutex
instead, allocating the iint becomes a lot simplier, as we don't need
to be concerned with two processes racing to allocate the iint. This
patch cleans up and improves performance for allocating the iint.

- removed redundant double i_mutex locking
- combined iint allocation with tree search

Changelog v2:
- removed the rwlock/read_lock changes from this patch

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2012-09-07 14:57:45 -04:00
Mimi Zohar
2fe5d6def1 ima: integrity appraisal extension
IMA currently maintains an integrity measurement list used to assert the
integrity of the running system to a third party.  The IMA-appraisal
extension adds local integrity validation and enforcement of the
measurement against a "good" value stored as an extended attribute
'security.ima'.  The initial methods for validating 'security.ima' are
hashed based, which provides file data integrity, and digital signature
based, which in addition to providing file data integrity, provides
authenticity.

This patch creates and maintains the 'security.ima' xattr, containing
the file data hash measurement.  Protection of the xattr is provided by
EVM, if enabled and configured.

Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata
integrity and, assuming success, compares the file's current hash value
with the one stored as an extended attribute in 'security.ima'.

Changelov v4:
- changed iint cache flags to hex values

Changelog v3:
- change appraisal default for filesystems without xattr support to fail

Changelog v2:
- fix audit msg 'res' value
- removed unused 'ima_appraise=' values

Changelog v1:
- removed unused iint mutex (Dmitry Kasatkin)
- setattr hook must not reset appraised (Dmitry Kasatkin)
- evm_verifyxattr() now differentiates between no 'security.evm' xattr
  (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the
  'security.evm' (INTEGRITY_NOXATTRS).
- replace hash_status with ima_status (Dmitry Kasatkin)
- re-initialize slab element ima_status on free (Dmitry Kasatkin)
- include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA
- merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin)
- removed unnecessary error variable in process_measurement() (Dmitry Kasatkin)
- use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured
  (moved ima_inode_post_setattr() to ima_appraise.c)
- make sure ima_collect_measurement() can read file

Changelog:
- add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin)
- fix the race condition between chmod, which takes the i_mutex and then
  iint->mutex, and ima_file_free() and process_measurement(), which take
  the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin)
- cleanup of ima_appraise_measurement() (Dmitry Kasatkin)
- changes as a result of the iint not allocated for all regular files, but
  only for those measured/appraised.
- don't try to appraise new/empty files
- expanded ima_appraisal description in ima/Kconfig
- IMA appraise definitions required even if IMA_APPRAISE not enabled
- add return value to ima_must_appraise() stub
- unconditionally set status = INTEGRITY_PASS *after* testing status,
  not before.  (Found by Joe Perches)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-09-07 14:57:44 -04:00
Dmitry Kasatkin
fb788d8b98 evm: clean verification status
When allocating from slab, initialization is done the first time in
init_once() and subsequently on free.  Because evm_status was not
re-initialized on free, evm_verify_hmac() skipped verifications.

This patch re-initializes evm_status.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-09-14 15:24:52 -04:00
Dmitry Kasatkin
24e0198efe evm: replace hmac_status with evm_status
We will use digital signatures in addtion to hmac.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-07-18 12:29:48 -04:00
Mimi Zohar
66dbc325af evm: re-release
EVM protects a file's security extended attributes(xattrs) against integrity
attacks.  This patchset provides the framework and an initial method.  The
initial method maintains an HMAC-sha1 value across the security extended
attributes, storing the HMAC value as the extended attribute 'security.evm'.
Other methods of validating the integrity of a file's metadata will be posted
separately (eg. EVM-digital-signatures).

While this patchset does authenticate the security xattrs, and
cryptographically binds them to the inode, coming extensions will bind other
directory and inode metadata for more complete protection.  To help simplify
the review and upstreaming process, each extension will be posted separately
(eg. IMA-appraisal, IMA-appraisal-directory).  For a general overview of the
proposed Linux integrity subsystem, refer to Dave Safford's whitepaper:
http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf.

EVM depends on the Kernel Key Retention System to provide it with a
trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the
root's keyring using keyctl.  Until EVM receives notification that the key has
been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can
not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
Loading the key and signaling EVM should be done as early as possible. Normally
this is done in the initramfs, which has already been measured as part of the
trusted boot.  For more information on creating and loading existing
trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt.  A
sample dracut patch, which loads the trusted/encrypted key and enables EVM, is
available from http://linux-ima.sourceforge.net/#EVM.

Based on the LSMs enabled, the set of EVM protected security xattrs is defined
at compile.  EVM adds the following three calls to the existing security hooks:
evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr.  To
initialize and update the 'security.evm' extended attribute, EVM defines three
calls: evm_inode_post_init(), evm_inode_post_setattr() and
evm_inode_post_removexattr() hooks.  To verify the integrity of a security
xattr, EVM exports evm_verifyxattr().

Changelog v7:
- Fixed URL in EVM ABI documentation

Changelog v6: (based on Serge Hallyn's review)
- fix URL in patch description
- remove evm_hmac_size definition
- use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size)
- moved linux include before other includes
- test for crypto_hash_setkey failure
- fail earlier for invalid key
- clear entire encrypted key, even on failure
- check xattr name length before comparing xattr names

Changelog:
- locking based on i_mutex, remove evm_mutex
- using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1
  operation.
- replaced crypto hash with shash (Dmitry Kasatkin)
- support for additional methods of verifying the security xattrs
  (Dmitry Kasatkin)
- iint not allocated for all regular files, but only for those appraised
- Use cap_sys_admin in lieu of cap_mac_admin
- Use __vfs_setxattr_noperm(), without permission checks, from EVM

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-07-18 12:29:40 -04:00
Mimi Zohar
f381c27222 integrity: move ima inode integrity data management
Move the inode integrity data(iint) management up to the integrity directory
in order to share the iint among the different integrity models.

Changelog:
- don't define MAX_DIGEST_SIZE
- rename several globally visible 'ima_' prefixed functions, structs,
  locks, etc to 'integrity_'
- replace '20' with SHA1_DIGEST_SIZE
- reflect location change in appropriate Kconfig and Makefiles
- remove unnecessary initialization of iint_initialized to 0
- rebased on current ima_iint.c
- define integrity_iint_store/lock as static

There should be no other functional changes.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2011-07-18 12:29:38 -04:00