IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
_bnxt_get_max_rings() that is invoked in bnxt_check_rings() already
accounts for the AGG ring(s) and gives a max value based on that.
Increasing for AGG rings before calling _bnxt_get_max_rings() will
result in checking for twice the number of rings than required and
it can fail. Fix it by adjusting for AGG rings after calling
_bnxt_get_max_rings().
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The recent commit to trim the RX and TX rings on P5 chips by assigning
each with max CP rings divided by 2 is not correct. Max CP rings
divided by 2 may be bigger than the original RX or TX and would
lead to failure. In other words, we may be checking for increased
RX/TX rings than required and it may fail.
Fix it by calling __bnxt_trim_rings() instead that would properly
trim RX and TX without the possibility of increasing their values.
Fixes: f5b29c6afe ("bnxt_en: Add helper to get the number of CP rings required for TX rings")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231212005122.2401-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MQyi
-----END PGP SIGNATURE-----
Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus Walleij says:
====================
Immutable tag for the PEF2256 framer
* tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add the Lantiq PEF2256 driver entry
pinctrl: Add support for the Lantic PEF2256 pinmux
net: wan: framer: Add support for the Lantiq PEF2256 framer
dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer
net: wan: Add framer framework support
====================
Link: https://lore.kernel.org/all/CACRpkdYT1J7noFUhObFgfA60XQAfL4rb=knEmWS__TKKtCMh7Q@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After contributing the driver, add myself as the maintainer for the
Lantiq PEF2256 driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231128132534.258459-6-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
This kind of component can be found in old telecommunication system.
It was used to digital transmission of many simultaneous telephone calls
by time-division multiplexing. Also using HDLC protocol, WAN networks
can be reached through the framer.
This pinmux support handles the pin muxing part (pins RP(A..D) and pins
XP(A..D)) of the PEF2256.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231128132534.258459-5-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-4-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-3-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A framer is a component in charge of an E1/T1 line interface.
Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
frames. It also provides information related to the E1/T1 line.
The framer framework provides a set of APIs for the framer drivers
(framer provider) to create/destroy a framer and APIs for the framer
users (framer consumer) to obtain a reference to the framer, and
use the framer.
This basic implementation provides a framer abstraction for:
- power on/off the framer
- get the framer status (line state)
- be notified on framer status changes
- get/set the framer configuration
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-2-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When compiling with gcc version 14.0.0 20231129 (experimental) and
CONFIG_FORTIFY_SOURCE=y, I've noticed the following warning:
...
In function 'fortify_memcpy_chk',
inlined from 'ax88796c_tx_fixup' at drivers/net/ethernet/asix/ax88796c_main.c:287:2:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
This call to 'memcpy()' is interpreted as an attempt to copy TX_OVERHEAD
(which is 8) bytes from 4-byte 'sop' field of 'struct tx_pkt_info' and
thus overread warning is issued. Since we actually want to copy both
'sop' and 'seg' fields at once, use the convenient 'struct_group()' here.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20231211090535.9730-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Walleij says:
====================
net: dsa: realtek: Two RTL8366RB fixes
These minor fixes were found while digging into other
issues: a weirdly named variable and bogus MTU handling.
Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
====================
Link: https://lore.kernel.org/r/20231209-rtl8366rb-mtu-fix-v1-0-df863e2b2b2a@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MTU callbacks are in layer 1 size, so for example 1500
bytes is a normal setting. Cache this size, and only add
the layer 2 framing right before choosing the setting. On
the CPU port this will however include the DSA tag since
this is transmitted from the parent ethernet interface!
Add the layer 2 overhead such as ethernet and VLAN framing
and FCS before selecting the size in the register.
This will make the code easier to understand.
The rtl8366rb_max_mtu() callback returns a bogus MTU
just subtracting the CPU tag, which is the only thing
we should NOT subtract. Return the correct layer 1
max MTU after removing headers and checksum.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver is using iowriteXX()/ioreadXX() APIs which are LE IO
accessors simplified as
1. Convert given value _from_ CPU _to_ LE
2. Write it to the device as is
The dev_addr is a byte stream, but because the driver uses 16-bit
IO accessors, it wants to perform double conversion on BE CPUs,
but it took it wrong, as it effectivelly does two times _from_ CPU
_to_ LE. What it has to do is to consider dev_addr as an array of
LE16 and hence do _from_ LE _to_ CPU conversion, followed by implied
_from_ CPU _to_ LE in the iowrite16().
To achieve that, use get_unaligned_le16(). This will make it correct
and allows to avoid sparse warning as reported by LKP.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312030058.hfZPTXd7-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231208153327.3306798-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pedro Tammela says:
====================
net/sched: conditional notification of events for cls and act
This is an optimization we have been leveraging on P4TC but we believe
it will benefit rtnl users in general.
It's common to allocate an skb, build a notification message and then
broadcast an event. In the absence of any user space listeners, these
resources (cpu and memory operations) are wasted. In cases where the subsystem
is lockless (such as in tc-flower) this waste is more prominent. For the
scenarios where the rtnl_lock is held it is not as prominent.
The idea is simple. Build and send the notification iif:
- The user requests via NLM_F_ECHO or
- Someone is listening to the rtnl group (tc mon)
On a simple test with tc-flower adding 1M entries, using just a single core,
there's already a noticeable difference in the cycles spent in tc_new_tfilter
with this patchset.
before:
- 43.68% tc_new_tfilter
+ 31.73% fl_change
+ 6.35% tfilter_notify
+ 1.62% nlmsg_notify
0.66% __tcf_qdisc_find.part.0
0.64% __tcf_chain_get
0.54% fl_get
+ 0.53% tcf_proto_lookup_ops
after:
- 39.20% tc_new_tfilter
+ 34.58% fl_change
0.69% __tcf_qdisc_find.part.0
0.67% __tcf_chain_get
+ 0.61% tcf_proto_lookup_ops
Note, the above test is using iproute2:tc which execs a shell.
We expect people using netlink directly to observe even greater
reductions.
The qdisc side needs some refactoring of the notification routines to fit in
this new model, so they will be sent in a later patchset.
====================
Link: https://lore.kernel.org/r/20231208192847.714940-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of today tc-filter/chain events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed. This will help to alleviate
system pressure when filters are concurrently added without the rtnl
lock as in tc-flower.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-8-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This argument is never called while set to true, so remove it as there's
no need for it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-7-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of today tc-action events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-6-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use max() in a couple of places that are open coding it with the
ternary operator.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231208192847.714940-5-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a convenience helper for routines handling conditional rtnl
events, that is code that might send a notification depending on
rtnl_has_listeners/rtnl_notify_needed.
Instead of:
if (skb)
rtnetlink_send(...)
Use:
rtnetlink_maybe_send(...)
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-4-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building on the rtnl_has_listeners helper, add the rtnl_notify_needed
helper to check if we can bail out early in the notification routines.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of today, rtnl code creates a new skb and unconditionally fills and
broadcasts it to the relevant group. For most operations this is okay
and doesn't waste resources in general.
When operations are done without the rtnl_lock, as in tc-flower, such
skb allocation, message fill and no-op broadcasting can happen in all
cores of the system, which contributes to system pressure and wastes
precious cpu cycles when no one will receive the built message.
Introduce this helper so rtnetlink operations can simply check if someone
is listening and then proceed if necessary.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv6: more data-race annotations
Small follow up series, taking care of races around
np->mcast_oif and np->ucast_oif.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
np->ucast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_UNICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->mcast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b8dbbbc535 ("net: rtnetlink: remove local list
in __linkwatch_run_queue()"). It's evidently broken when there's a
non-urgent work that gets added back, and then the loop can never
finish.
While reverting, add a note about that.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b8dbbbc535 ("net: rtnetlink: remove local list in __linkwatch_run_queue()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device supports UDP hardware segmentation offload, which helps
improving the performance. Thus, this patch adds support for UDP
segmentation offload from the driver side.
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow jumbo frames by changing maximum MTU size and number of RX queues.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add handling specific descriptor types F{START,MID,END}. However,
such jumbo frames will not happen yet because the maximum MTU size is
still default for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If this hardware receives a jumbo frame like 2KiB or more, it will be
split into multiple queues. In the near future, to support this,
add handling specific descriptor types F{START,MID,END}. However, such
jumbo frames will not happen yet because the maximum MTU size is still
default for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support jumbo frames, set GWMDNC register with acceptable maximum
values for TX and RX.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add a setting ext descriptor function to improve code readability.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver would like to transmit a jumbo frame like 2KiB or more,
it should be split into multiple queues. In the near future, to support
this, add unmap_addrs array to unmap dma mapping address instead of dma
address in each TX descriptor because the descriptors may not have
the top dma address.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If this hardware receives a jumbo frame like 2KiB or more, it will be
split into multiple queues. In the near future, to support this, use
build_skb() instead of netdev_alloc_skb_ip_align().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Array index should not be negative, so use unsigned int for
descriptors related array index.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop unused argument and return value of rswitch_tx_free() to
simplify the code.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect mdiodev->modalias to be NUL-terminated based on its usage with
strcmp():
| return strcmp(mdiodev->modalias, drv->name) == 0;
Moreover, mdiodev->modalias is already zero-allocated:
| mdiodev = kzalloc(sizeof(*mdiodev), GFP_KERNEL);
... which means the NUL-padding strncpy provides is not necessary.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect fw_info->fw_file_name to be NUL-terminated based on its use
within _request_firmware_prepare() wherein `name` refers to it:
| if (firmware_request_builtin_buf(firmware, name, dbuf, size)) {
| dev_dbg(device, "using built-in %s\n", name);
| return 0; /* assigned */
| }
... and with firmware_request_builtin() also via `name`:
| if (strcmp(name, b_fw->name) == 0) {
There is no evidence that NUL-padding is required.
Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with
sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer
size to the destination buffer:
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
host_info allocation is done in ena_com_allocate_host_info() via
dma_alloc_coherent() and is not zero initialized by alloc_etherdev_mq().
However zero initialization of the destination doesn't matter in this case,
because strscpy() guarantees a NULL termination.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
My prior patch went a bit too far, because apparently fib6_has_expires()
could be true while f6i->gc_link is not hashed yet.
fib6_set_expires_locked() can indeed set RTF_EXPIRES
while f6i->fib6_table is NULL.
Original syzbot reports were about corruptions caused
by dangling f6i->gc_link.
Fixes: 5a08d0065a ("ipv6: add debug checks in fib6_info_release()")
Reported-by: syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231207201322.549000-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My previous patch added a call to linkwatch_sync_dev(),
but that of course needs to be called under RTNL, which
I missed earlier, but now saw RCU warnings from.
Fix that by acquiring the RTNL in a similar fashion to
how other files do it here.
Fixes: facd15dfd6 ("net: core: synchronize link-watch when carrier is queried")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231206172122.859df6ba937f.I9c80608bcfbab171943ff4942b52dbd5e97fe06e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value from nla_len() is never expected to be negative, and can
never be more than struct nlattr::nla_len (a u16). Adjust the prototype
on the function. This will let GCC's value range optimization passes
know that the return can never be negative, and can never be larger than
u16. As recently discussed[1], this silences the following warning in
GCC 12+:
net/wireless/nl80211.c: In function 'nl80211_set_cqm_rssi.isra':
net/wireless/nl80211.c:12892:17: warning: 'memcpy' specified bound 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Wstringop-overflow=]
12892 | memcpy(cqm_config->rssi_thresholds, thresholds,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12893 | flex_array_size(cqm_config, rssi_thresholds,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12894 | n_thresholds));
| ~~~~~~~~~~~~~~
A future change would be to clamp the subtraction to make sure it never
wraps around if nla_len is somehow less than NLA_HDRLEN, which would
have the additional benefit of being defensive in the face of nlattr
corruption or logic errors.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311090752.hWcJWAHL-lkp@intel.com/ [1]
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Michael Walle <mwalle@kernel.org>
Cc: Max Schulze <max.schulze@online.de>
Link: https://lore.kernel.org/r/20231202202539.it.704-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231206205904.make.018-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the use of define DSA_TAG_PROTO_LAN937X_VALUE to
DSA_TAG_PROTO_LAN937X to improve readability.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20231206160124.1935451-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 227b60f510 added a seqlock to ensure that the low and high
port numbers were always updated together.
This is overkill because the two 16bit port numbers can be held in
a u32 and read/written in a single instruction.
More recently 91d0b78c51 added support for finer per-socket limits.
The user-supplied value is 'high << 16 | low' but they are held
separately and the socket options protected by the socket lock.
Use a u32 containing 'high << 16 | low' for both the 'net' and 'sk'
fields and use READ_ONCE()/WRITE_ONCE() to ensure both values are
always updated together.
Change (the now trival) inet_get_local_port_range() to a static inline
to optimise the calling code.
(In particular avoiding returning integers by reference.)
Signed-off-by: David Laight <david.laight@aculab.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/4e505d4198e946a8be03fb1b4c3072b0@AcuMS.aculab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
Convert net selftests to run in unique namespace (Part 2)
Here is the 2nd part of converting net selftests to run in unique namespace.
This part converts all bridge, vxlan, vrf tests.
Here is the part 1 link:
https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./vrf-xfrm-tests.sh
No qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
netem qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
Tests passed: 14
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the test result after conversion.
]# ./vrf_strict_mode_test.sh
################################################################################
TEST SECTION: VRF strict_mode test on init network namespace
################################################################################
TEST: init: net.vrf.strict_mode is available [ OK ]
TEST: init: strict_mode=0 by default, 0 vrfs [ OK ]
...
TEST: init: check strict_mode=1 [ OK ]
TEST: testns-HvoZkB: check strict_mode=0 [ OK ]
Tests passed: 37
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
