IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Enable shared host tagset to make sure that total outstanding I/O count can
not exceed controller's can_queue setting.
Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add sysfs attributes for exposing target device details such as SAS
address, firmware device handle, and persistent ID for the
controller-attached devices and RAID volumes.
Link: https://lore.kernel.org/r/20220517115310.13062-3-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Complete all new I/O requests issued to an unrecoverable controller with
DID_ERROR status instead of returning the I/O requests with
SCSI_MLQUEUE_HOST_BUSY. This will prevent the infinite retries of the new
I/Os when a controller is in an unrecoverable state.
Link: https://lore.kernel.org/r/20220505184808.24049-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If any drive is missing during reset, the driver checks whether the device
is exposed to the OS. If it is, then it removes the device from the OS and
its own internal list. For hidden devices, even if they are found as
missing during reset, the driver is not removing them from its internal
list.
Modify driver to remove hidden devices from the driver's target device list
if they are missing during soft reset.
Link: https://lore.kernel.org/r/20220505184808.24049-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement driver support for management applications to enable persistent
event log (PEL) notifications. Upon receipt of events, the driver will
increment a sysfs variable named event_counter. The management application
will poll for event_counter value changes and signal the application about
events.
Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain management commands which require firmware intervention.
These commands are termed MPT commands. Add support for them.
Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain bsg commands which need to be completed by the driver
without involving firmware. These requests are termed driver commands. Add
support for these.
Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create bsg device per controller for controller management purposes.
bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1,
etc.
Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warning by not allocating driver's event handling worker
queue with WQ_MEM_RECLAIM flag enabled:
workqueue: WQ_MEM_RECLAIM
mpi3mr_fwevt_worker [mpi3mr] is flushing !WQ_MEM_RECLAIM events
Link: https://lore.kernel.org/r/20220218180515.27455-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is missing to set the residual size while completing an
I/O. Ensure proper data transfer size is reported to the kernel on I/O
completion based on the transfer length reported by the firmware.
Link: https://lore.kernel.org/r/20220210095817.22828-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a driver command which requires the driver to issue a follow up
command using the same command frame is outstanding and a soft reset
operation occurs, then that driver command frame is getting marked as in
use permanently and won't be reused again.
Clear the driver command frames while flushing out the outstanding commands
and avoid issuing any new requests using these command frames while soft
reset is going on.
Link: https://lore.kernel.org/r/20220210095817.22828-6-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hibernation operation fails when it is issued for second time. This is
because the driver is trying to release the IOC's PCI resources after
setting power state to D3.
Set the IOC's power state to D3 only after releasing the IOC's PCI
resources.
Link: https://lore.kernel.org/r/20220210095817.22828-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During controller reset, the driver tries to flush all the pending firmware
event works from worker queue that are queued prior to the reset. However,
if any work is waiting for device addition/removal operation to be
completed at the SML, then a deadlock is observed. This is due to the
controller reset waiting for the device addition/removal to be completed
and the device/addition removal is waiting for the controller reset to be
completed.
To limit this deadlock, continue with the controller reset handling without
canceling the work which is waiting for device addition/removal operation
to complete at SML.
Link: https://lore.kernel.org/r/20220210095817.22828-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance driver to consider MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a success
for TMs issued by it and check the pending I/Os to decide the success or
failure of the task management requests instead of just considering the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a failure of the task management
request.
Link: https://lore.kernel.org/r/20211220141159.16117-24-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the io_uring interface in I/O-polled mode.
This feature is disabled in the driver by default. To enable the feature, a
module parameter "poll_queues" has to be set with the desired number of
polling queues.
When the feature is enabled, the driver reserves a certain number of
operational queue pairs for the poll_queues either from the available queue
pairs or creates additional queue pairs based on the operational queue
availability.
The Polling queues will have corresponding IRQ and ISR functions as similar
to default queues. However, the IRQ line is disabled by the driver for
poll_queues.
Link: https://lore.kernel.org/r/20211220141159.16117-22-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print cable management & temperature threshold event data.
Use vendor id & device id macro definitions from MPI3 headers.
Link: https://lore.kernel.org/r/20211220141159.16117-21-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The IOC sends a Prepare for Reset Event to the host to prepare for a Soft
Reset. This event data has two reason codes:
1. Start - The host is expected to gracefully quiesce all I/O within
approximately 1 second.
2. Abort - The IOC is requesting to abort a previous Prepare for Reset
Event request. Normal I/O may be resumed.
Link: https://lore.kernel.org/r/20211220141159.16117-20-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detect asynchronous reset that occurred in the firmware by polling for
reset history bit of IOC status register is set and if that bit is set,
then the driver waits for the controller to become ready and then
re-initializes the controller.
Also reduce the time driver is waiting for the controller to acknowledge
the reset action after issuing a specific reset action to the
controller. The wait time is reduced from 510 seconds to 30 seconds. If the
controller didn't acknowledge a specific reset action within the time
interval then the driver marks the controller as unrecoverable instead of
retrying two more times prior to giving up.
Link: https://lore.kernel.org/r/20211220141159.16117-17-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the driver marks the controller as unrecoverable if there is an
asynchronous reset or fault during the initialization, reinitialization
post reset, and OS resume.
Enhance driver to retry the initialization, re-initialization, and resume
sequences for a maximum of 3 times if the controller became faulty or
asynchronously reset due to a firmware activation during the initialization
sequence.
Link: https://lore.kernel.org/r/20211220141159.16117-15-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following special handling is needed for UNMAP commands issued to NVMe
drives:
- On B0 boards, if the parameter list length is greater than 24 and not a
16-byte multiple, then truncate the parameter list length to a 16-byte
multiple.
- On A0 boards, if the parameter list length is greater than block
descriptor data length + 8, then truncate the parameter list length to
block descriptor data length + 8 value.
Link: https://lore.kernel.org/r/20211220141159.16117-10-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add validation for various access statuses prior to exposing attached
target device to the operating system.
Link: https://lore.kernel.org/r/20211220141159.16117-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS4 Controller firmware exposes the SES devices in Managed PCIe Switch
as a PCIe Device Type SCSI Device
(MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE).
Driver is enhanced to handle this device type by:
- Exposing the device to the upper layers and
- Not updating any hardware sectors & virtual boundary settings as these
settings are needed only for NVMe devices.
Link: https://lore.kernel.org/r/20211220141159.16117-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't issue the soft reset if internal commands are flushed out with reset
status. Soft reset needs to be issued only if commands are really timed
out.
Link: https://lore.kernel.org/r/20211220141159.16117-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
When scanning devices through the 'scan' attribute in sysfs, the user will
observe duplicate device entries in lsscsi command output.
Set the shost's max_channel to zero to avoid this.
Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver is not setting up IRQs in the resume path. As a result, hibernation
path is broken and controller will not be operational after system is
resumed.
Set up IRQs to handle the hibernation case.
Link: https://lore.kernel.org/r/20210818081755.1274470-1-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: thenzl@redhat.com
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warning reported by static analysis tool smatch:
smatch warnings:
drivers/scsi/mpi3mr/mpi3mr_os.c:873 mpi3mr_update_tgtdev() error: we
previously assumed 'mrioc->shost' could be null (see line 870
Link: https://lore.kernel.org/r/20210629141153.3158-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
drivers/scsi/mpi3mr/mpi3mr_os.c:24:5: warning: symbol 'prot_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:28:5: warning: symbol 'prot_guard_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:31:5: warning: symbol 'logging_level' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210604071407.1360742-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix a double free, scsi_tgt_priv_data will be freed in
mpi3mr_target_destroy() so remove the kfree() from mpi3mr_target_alloc().
I've also removed few unneeded initialisations.
Link: https://lore.kernel.org/r/20210608145712.16386-1-thenzl@redhat.com
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604023530.GA180997@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Read PCI_EXT_CAP_ID_DSN to query security status.
The driver will throw a warning message when a non-secure type controller
is detected. The purpose of this interface is to avoid interacting with any
firmware which is not secured/signed by Broadcom. Any tampering on
firmware component will be detected by hardware and it will be communicated
to the driver to avoid any further interaction with that component.
Link: https://lore.kernel.org/r/20210520152545.2710479-23-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wait for host I/O completion (default 180 seconds) if I/O timeout is
detected on VDs.
Link: https://lore.kernel.org/r/20210520152545.2710479-21-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller hardware can not handle certain UNMAP commands for NVMe
drives. Add support in the driver for checking those commands and handle
them appropriately.
Link: https://lore.kernel.org/r/20210520152545.2710479-17-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
