IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Report the correct WC error if a MW bind is performed
on an already valid/bound window.
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The op_type field CQ poll info structure is incorrectly
filled in with the queue type as opposed to the op_type
received in the CQEs. The wrong opcode could be decoded
and returned to the ULP.
Copy the op_type field received in the CQE in the CQ poll
info structure.
Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Although the code for residual handling in the SRP initiator follows the
SCSI documentation, that documentation has never been correct. Because
scsi_finish_command() starts from the data buffer length and subtracts the
residual, scsi_set_resid() must not be called if a residual overflow
occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a
residual overflow occurrs.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface")
Fixes: e714531a349f ("IB/srp: Fix residual handling")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-3-bvanassche@acm.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Delete a duplicate statement from this function implementation.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230705103950.15225-1-duminjie@vivo.com
Acked-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
User applications alert the driver when the Doorbell FIFO
reaches the alarm threshold. The driver updates the pacing
parameters in the shared page to do the maximum pacing
by the application till the DB FIFO congestion reduces to
pacing threshold. Driver keeps checking the DB FIFO depth
at the pacing interval and gradually adjusts the pacing level.
Once the pacing level reaches default values (no congestion in
the FIFO) pacing gets completed.
Link: https://lore.kernel.org/r/1689742977-9128-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the alloc_page uapi functionality for handling the
mapping of doorbell pacing shared page and bar address.
Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Checks for pacing feature capability and get the doorbell pacing
configuration using FW commands. Allocate a page and initialize
the pacing parameters for the applications. Cleanup the page and
de-initialize the pacing during device removal.
Link: https://lore.kernel.org/r/1689742977-9128-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We would like to enable the use of siw on top of a VPN that is
constructed and managed via a tun device. That hasn't worked up
until now because ARPHRD_NONE devices (such as tun devices) have
no GID for the RDMA/core to look up.
But it turns out that the egress device has already been picked for
us -- no GID is necessary. addr_handler() just has to do the right
thing with it.
Link: https://lore.kernel.org/r/168960675257.3007.4737911174148394395.stgit@manet.1015granger.net
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the iwarp side properly set the ndev in the device's sgid_attrs
so that address resolution can treat it more like a RoCE device.
Link: https://lore.kernel.org/r/168960673933.3007.8043081822081877578.stgit@manet.1015granger.net
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses.
Currently, siw_device_create() falls back to copying the IB device's
name in those cases, because an all-zero MAC address breaks the RDMA
core address resolution mechanism.
However, at the point when siw_device_create() constructs a GID, the
ib_device::name field is uninitialized, leaving the MAC address to
remain in an all-zero state.
Fabricate a random artificial GID for such devices, and ensure this
artificial GID is returned for all device query operations.
Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net
Reported-by: Tom Talpey <tom@talpey.com>
Fixes: a2d36b02c15d ("RDMA/siw: Enable siw on tunnel devices")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new irdma_iw_get_vlan_prio() function requires IPv6 support to build:
x86_64-linux-ld: drivers/infiniband/hw/irdma/cm.o: in function `irdma_iw_get_vlan_prio':
cm.c:(.text+0x2832): undefined reference to `ipv6_chk_addr'
Add a compile-time check in the same way as elsewhere in this file to avoid
this by conditionally leaving out the ipv6 specific bits.
Fixes: f877f22ac1e9b ("RDMA/irdma: Implement egress VLAN priority")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230718193835.3546684-1-arnd@kernel.org
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
All errors go to the error handling path, except this one. Be consistent
and also branch to it.
Fixes: 02ed253770fb ("RDMA/rxe: Introduce rxe access supported flags")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/43698d8a3ed4e720899eadac887427f73d7ec2eb.1689623735.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver unload hits a hang during stress testing of load/unload.
stack trace snippet -
tasklet_kill at ffffffff9aabb8b2
bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re]
bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re]
bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re]
bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re]
tasklet_kill can hang if the tasklet is scheduled after it is disabled.
Modified the sequences to disable the interrupt first and synchronize
irq before disabling the tasklet.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP")
introduced a new struct mthca_sqp which doesn't contain struct mthca_qp
any longer. Placing a pointer of this new struct into qptable leads
to crashes, because mthca_poll_one() expects a qp pointer. Fix this
by putting the correct pointer into qptable.
Fixes: 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de
Signed-off-by: Leon Romanovsky <leon@kernel.org>
8d037973d48c ("RDMA/core: Refactor rdma_bind_addr") intoduces as regression
on irdma devices on certain tests which uses rdma CM, such as cmtime.
No connections can be established with the MAD QP experiences a fatal
error on the active side.
The cma destination address is not updated with the dst_addr when ULP
on active side calls rdma_bind_addr followed by rdma_resolve_addr.
The id_priv state is 'bound' in resolve_prepare_src and update is skipped.
This leaves the dgid passed into irdma driver to create an Address Handle
(AH) for the MAD QP at 0. The create AH descriptor as well as the ARP cache
entry is invalid and HW throws an asynchronous events as result.
[ 1207.656888] resolve_prepare_src caller: ucma_resolve_addr+0xff/0x170 [rdma_ucm] daddr=200.0.4.28 id_priv->state=7
[....]
[ 1207.680362] ice 0000:07:00.1 rocep7s0f1: caller: irdma_create_ah+0x3e/0x70 [irdma] ah_id=0 arp_idx=0 dest_ip=0.0.0.0
destMAC=00:00:64:ca:b7:52 ipvalid=1 raw=0000:0000:0000:0000:0000:ffff:0000:0000
[ 1207.682077] ice 0000:07:00.1 rocep7s0f1: abnormal ae_id = 0x401 bool qp=1 qp_id = 1, ae_src=5
[ 1207.691657] infiniband rocep7s0f1: Fatal error (1) on MAD QP (1)
Fix this by updating the CMA destination address when the ULP calls
a resolve address with the CM state already bound.
Fixes: 8d037973d48c ("RDMA/core: Refactor rdma_bind_addr")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230712234133.1343-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
CQP completion statistics is read lockesly in irdma_wait_event and
irdma_check_cqp_progress while it can be updated in the completion
thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports.
Make completion statistics an atomic variable to reflect coherent updates
to it. This will also avoid load/store tearing logic bug potentially
possible by compiler optimizations.
[77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma]
[77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4:
[77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma]
[77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma]
[77346.171835] cqp_compl_worker+0x1b/0x20 [irdma]
[77346.172009] process_one_work+0x4d1/0xa40
[77346.172024] worker_thread+0x319/0x700
[77346.172037] kthread+0x180/0x1b0
[77346.172054] ret_from_fork+0x22/0x30
[77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2:
[77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma]
[77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma]
[77346.172592] irdma_create_aeq+0x390/0x45a [irdma]
[77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma]
[77346.172944] irdma_probe+0x54f/0x620 [irdma]
[77346.173122] auxiliary_bus_probe+0x66/0xa0
[77346.173137] really_probe+0x140/0x540
[77346.173154] __driver_probe_device+0xc7/0x220
[77346.173173] driver_probe_device+0x5f/0x140
[77346.173190] __driver_attach+0xf0/0x2c0
[77346.173208] bus_for_each_dev+0xa8/0xf0
[77346.173225] driver_attach+0x29/0x30
[77346.173240] bus_add_driver+0x29c/0x2f0
[77346.173255] driver_register+0x10f/0x1a0
[77346.173272] __auxiliary_driver_register+0xbc/0x140
[77346.173287] irdma_init_module+0x55/0x1000 [irdma]
[77346.173460] do_one_initcall+0x7d/0x410
[77346.173475] do_init_module+0x81/0x2c0
[77346.173491] load_module+0x1232/0x12c0
[77346.173506] __do_sys_finit_module+0x101/0x180
[77346.173522] __x64_sys_finit_module+0x3c/0x50
[77346.173538] do_syscall_64+0x39/0x90
[77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
On code inspection, there are many instances in the driver where
CEQE and AEQE fields written to by HW are read without guaranteeing
that the polarity bit has been read and checked first.
Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields
prior to checking the polarity bit.
Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-16-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When a VLAN interface is in use, get and use the VLAN
egress mapping.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175318.1301-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This code is trying to ensure that only the flags specified in the list
are allowed. The problem is that ucmd->rx_hash_fields_mask is a u64 and
the flags are an enum which is treated as a u32 in this context. That
means the test doesn't check whether the highest 32 bits are zero.
Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Delete a duplicate statement from this function implementation.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230706022704.1260-1-duminjie@vivo.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update device API and request RDMA write counters if RDMA write is
supported by device. Expose newly added counters through ib core
counters mechanism.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://lore.kernel.org/r/20230703153404.30877-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The MR memory allocation requests extra bytes to guarantee that there
is enough space to find the memory aligned to MLX5_UMR_ALIGN.
For power-of-two sizes, the alignment can be guaranteed by kmalloc()
according to commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural
alignment for kmalloc(power-of-two)").
So if target alignment is power-of-two and adding the extra bytes
crosses a power-of-two boundary, use the next power-of-two as the
allocation size.
Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com>
Link: https://lore.kernel.org/r/20230629213248.3184245-2-yzhong@purestorage.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re
* Use the common mmap functions
* Support disassociation
* Improve FW command flow
- bnxt_re support for "low latency push", this allows a packet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZJxq+wAKCRCFwuHvBreF
YSN+AQDKAmWdKCqmc3boMIq5wt4h7yYzdW47LpzGarOn5Hf+UgEA6mpPJyRqB43C
CNXYIbASl/LLaWzFvxCq/AYp6tzuog4=
=I8ju
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle saw a focus on rxe and bnxt_re drivers:
- Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma
- rxe uses workqueues instead of tasklets
- rxe has better compliance around access checks for MRs and rereg_mr
- mana supportst he 'v2' FW interface for RX coalescing
- hfi1 bug fix for stale cache entries in its MR cache
- mlx5 buf fix to handle FW failures when destroying QPs
- erdma HW has a new doorbell allocation mechanism for uverbs that is
secure
- Lots of small cleanups and rework in bnxt_re:
- Use the common mmap functions
- Support disassociation
- Improve FW command flow
- support for 'low latency push'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
RDMA/bnxt_re: Fix an IS_ERR() vs NULL check
RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged"
RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c
RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()
RDMA/bnxt_re: Remove incorrect return check from slow path
RDMA/bnxt_re: Enable low latency push
RDMA/bnxt_re: Reorg the bar mapping
RDMA/bnxt_re: Move the interface version to chip context structure
RDMA/bnxt_re: Query function capabilities from firmware
RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage
RDMA/bnxt_re: Add disassociate ucontext support
RDMA/bnxt_re: Use the common mmap helper functions
RDMA/bnxt_re: Initialize opcode while sending message
RDMA/cma: Remove NULL check before dev_{put, hold}
RDMA/rxe: Simplify cq->notify code
RDMA/rxe: Fixes mr access supported list
RDMA/bnxt_re: optimize the parameters passed to helper functions
RDMA/bnxt_re: remove redundant cmdq_bitmap
RDMA/bnxt_re: use firmware provided max request timeout
RDMA/bnxt_re: cancel all control path command waiters upon error
...
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
This pull contains the following branches:
doc.2023.05.10a: Documentation updates
fixes.2023.05.11a: Miscellaneous fixes, perhaps most notably:
o Remove RCU_NONIDLE(). The new visibility of most of the idle
loop to RCU has obsoleted this API.
o Make the RCU_SOFTIRQ callback-invocation time limit also apply
to the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
o Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only
invoked once per 32 callbacks due to its high overhead.)
o Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs,
which fixes a bug that can occur on systems with non-contiguous
CPU numbering.
kvfree.2023.05.10a: kvfree_rcu updates
o Eliminate the single-argument variant of k[v]free_rcu() now
that all uses have been converted to k[v]free_rcu_mightsleep().
o Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks
too soon. Yes, this is closing the barn door after the horse
has escaped, but Murphy says that there will be more horses.
nocb.2023.05.11a: Callback-offloading updates
o Fix a number of bugs involving the shrinker and lazy callbacks.
rcu-tasks.2023.05.10a: Tasks RCU updates
torture.2023.05.15a: Torture-test updates
rcu-urgent.2023.06.06a: Urgent SRCU fix (already pulled)
-----BEGIN PGP SIGNATURE-----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=3LCd
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
"Documentation updates
Miscellaneous fixes, perhaps most notably:
- Remove RCU_NONIDLE(). The new visibility of most of the idle loop
to RCU has obsoleted this API.
- Make the RCU_SOFTIRQ callback-invocation time limit also apply to
the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
- Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only invoked
once per 32 callbacks due to its high overhead.)
- Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which
fixes a bug that can occur on systems with non-contiguous CPU
numbering.
kvfree_rcu updates:
- Eliminate the single-argument variant of k[v]free_rcu() now that
all uses have been converted to k[v]free_rcu_mightsleep().
- Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too
soon. Yes, this is closing the barn door after the horse has
escaped, but Murphy says that there will be more horses.
Callback-offloading updates:
- Fix a number of bugs involving the shrinker and lazy callbacks.
Tasks RCU updates
Torture-test updates"
* tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
torture: Remove duplicated argument -enable-kvm for ppc64
doc/rcutorture: Add description of rcutorture.stall_cpu_block
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
rcutorture: Correct name of use_softirq module parameter
locktorture: Add long_hold to adjust lock-hold delays
rcu/nocb: Make shrinker iterate only over NOCB CPUs
rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs
rcu: Make rcu_cpu_starting() rely on interrupts being disabled
rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work
rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp
rcu: Employ jiffies-based backstop to callback time limit
rcu: Check callback-invocation time limit for rcuc kthreads
rcu: Remove RCU_NONIDLE()
rcu: Add more RCU files to kernel-api.rst
rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output
rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker
rcu/nocb: Fix shrinker race against callback enqueuer
rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSYzfYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/ucH/iOM/1Py/fSg0qSs
7NJ4XXlourT5zrnRMom3cm3d9gYqgTzgvKFL3kjMEexTRVYbhlcO4ZPRsiry8zxF
ToGX+V8tDMqb8WSdFHzkljRY+zDRyfEUDMlTzROAD9DunLmQtkJKyrggkeGdjkpP
OyfGqKpwlLXZRAXBil/U8Mx9MHdjJubloZwghLZr33VdUZa68+JJ9l6w163Oe/ET
K264NM0wxN/kvN57JvePgqMccQwpINylg8IhRI+XelgczjUXeJBsOA8TDv4bDN4Q
bjCLhkWbIaZtTYqvOXa/kD0T8wd7KETsMBQN8YzyDh6W0GmAlJjTawyAhA6jA5in
x3uz2W8=
=L3zp
-----END PGP SIGNATURE-----
Merge tag 'v6.4' into rdma.git for-next
Linux 6.4
Resolve conflicts between rdma rc and next in rxe_cq matching linux-next:
drivers/infiniband/sw/rxe/rxe_cq.c:
https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bnxt_re_mmap_entry_insert() function returns NULL, not error pointers.
Update the check for errors accordingly.
Fixes: 360da60d6c6e ("RDMA/bnxt_re: Enable low latency push")
Link: https://lore.kernel.org/r/8d92e85f-626b-4eca-8501-ca7024cfc0ee@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update function comment of bnxt_qplib_map_rc()
Remove intermediate return value ENXIO and directly called
bnxt_qplib_map_rc() from __send_message_basic_sanity().
Link: https://lore.kernel.org/r/20230616061700.741769-2-kashyap.desai@broadcom.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As MSG_SENDPAGE_NOTLAST is being phased out along with sendpage(), don't
use it further in than the sendpage methods, but rather translate it to
MSG_MORE and use that instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: Bernard Metzler <bmt@zurich.ibm.com>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Leon Romanovsky <leon@kernel.org>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: David Ahern <dsahern@kernel.org>
cc: Karsten Graul <kgraul@linux.ibm.com>
cc: Wenjia Zhang <wenjia@linux.ibm.com>
cc: Jan Karcher <jaka@linux.ibm.com>
cc: "D. Wythe" <alibuda@linux.alibaba.com>
cc: Tony Lu <tonylu@linux.alibaba.com>
cc: Wen Gu <guwen@linux.alibaba.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: Steffen Klassert <steffen.klassert@secunet.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230623225513.2732256-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.
Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.
Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reorganize the code for allocation and mapping of Doorbell
pages. Implements new HW command to get the BAR length used by L2
driver. These changes are used by the future patch which maps the WC
Doorbell pages.
Also, introduced a new lock dpi_tbl_lock for synchronize the DB page
allocation from users.
Link: https://lore.kernel.org/r/1686679943-17117-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
