IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pass a extent_status pointer prealloc to __es_insert_extent(). If the
pointer is non-null, it is used directly when a new extent_status is
needed to avoid memory allocation failures.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.
The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.
This is to prepare for the use of pre-allocated extent_status later.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.
A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c70 ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mballoc criterias have historically been called by numbers
like CR0, CR1... however this makes it confusing to understand
what each criteria is about.
Change these criterias from numbers to symbolic names and add
relevant comments. While we are at it, also reformat and add some
comments to ext4_seq_mb_stats_show() for better readability.
Additionally, define CR_FAST which signifies the criteria
below which we can make quicker decisions like:
* quitting early if (free block < requested len)
* avoiding to scan free extents smaller than required len.
* avoiding to initialize buddy cache and work with existing cache
* limiting prefetches
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/a2dc6ec5aea5e5e68cf8e788c2a964ffead9c8b0.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough. This speeds up our allocation at the
cost of slightly reduced preallocation.
The patch also adds a new sysfs tunable:
* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order
This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make the logic of searching average fragment list of a given order reusable
by abstracting it out to a differnet function. This will also avoid
code duplication in upcoming patches.
No functional changes.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/028c11d95b17ce0285f45456709a0ca922df1b83.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the call stack in ext4_run_li_request is as follows:
/*
* nr = no. of BGs we want to fetch (=s_mb_prefetch)
* prefetch_ios = no. of BGs not uptodate after
* ext4_read_block_bitmap_nowait()
*/
next_group = ext4_mb_prefetch(sb, group, nr, prefetch_ios);
ext4_mb_prefetch_fini(sb, next_group prefetch_ios);
ext4_mb_prefetch_fini() will only try to initialize buddies for BGs in
range [next_group - prefetch_ios, next_group). This is incorrect since
sometimes (prefetch_ios < nr), which causes ext4_mb_prefetch_fini() to
incorrectly ignore some of the BGs that might need initialization. This
issue is more notable now with the previous patch enabling "fetching" of
BLOCK_UNINIT BGs which are marked buffer_uptodate by default.
Fix this by passing nr to ext4_mb_prefetch_fini() instead of
prefetch_ios so that it considers the right range of groups.
Similarly, make sure we don't pass nr=0 to ext4_mb_prefetch_fini() in
ext4_mb_regular_allocator() since we might have prefetched BLOCK_UNINIT
groups that would need buddy initialization.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/05e648ae04ec5b754207032823e9c1de9a54f87a.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, ext4_mb_prefetch() and ext4_mb_prefetch_fini() skip
BLOCK_UNINIT groups since fetching their bitmaps doesn't need disk IO.
As a consequence, we end not initializing the buddy structures and CR0/1
lists for these BGs, even though it can be done without any disk IO
overhead. Hence, don't skip such BGs during prefetch and prefetch_fini.
This improves the accuracy of CR0/1 allocation as earlier, we could have
essentially empty BLOCK_UNINIT groups being ignored by CR0/1 due to their buddy
not being initialized, leading to slower CR2 allocations. With this patch CR0/1
will be able to discover these groups as well, thus improving performance.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/dc3130b8daf45ffe63d8a3c1edcf00eb8ba70e1f.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we are inside ext4_mb_complex_scan_group() in CR1, we can be sure
that this group has atleast 1 big enough continuous free extent to satisfy
our request because (free / fragments) > goal length.
Hence, instead of wasting time looping over smaller free extents, only
try to consider the free extent if we are sure that it has enough
continuous free space to satisfy goal length. This is particularly
useful when scanning highly fragmented BGs in CR1 as, without this
patch, the allocator might stop scanning early before reaching the big
enough free extent (due to ac_found > mb_max_to_scan) which causes us to
uncessarily trim the request.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a5473df4517c53ec940bc9b603ef83a547032a32.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Track number of allocations where the length of blocks allocated is equal to the
length of goal blocks (post normalization). This metric could be useful if
making changes to the allocator logic in the future as it could give us
visibility into how often do we trim our requests.
PS: ac_b_ex.fe_len might get modified due to preallocation efforts and
hence we use ac_f_ex.fe_len instead since we want to compare how much the
allocator was able to actually find.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/343620e2be8a237239ea2613a7a866ee8607e973.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This gives better visibility into the number of extents scanned in each
particular CR. For example, this information can be used to see how out
block group scanning logic is performing when the BG is fragmented.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/55bb6d80f6e22ed2a5a830aa045572bdffc8b1b9.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert criteria to be an enum so it easier to maintain and
update the tracefiles to use enum names. This change also makes
it easier to insert new criterias in the future.
There is no functional change in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5d82fd467bdf70ea45bdaef810af3b146013946c.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_stats & ext4_mb_max_to_scan are never used. We use
sbi->s_mb_stats and sbi->s_mb_max_to_scan instead.
Hence kill these extern declarations.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/928b3142062172533b6d1b5a94de94700590fef3.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There will be changes coming in future patches which will introduce a new
criteria for block allocation. This removes the useless setting of ac_criteria.
AFAIU, this might be only used to differentiate between whether a preallocated
blocks was allocated or was regular allocator called for allocating blocks.
Hence this also adds the debug prints to identify what type of block allocation
was done in ext4_mb_show_ac().
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1dbae05617519cb6202f1b299c9d1be3e7cda763.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Function ext4_free_blocks_simple needs count in cluster. Function
ext4_free_blocks accepts count in block. Convert count to cluster
to fix the mismatch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
a fatal shutdown during TDX private<=>shared conversion
- Annotate sites where VM "exit reasons" are reused as hypercall
numbers.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmSZ50cACgkQaDWVMHDJ
krAPEg//bAR0SzrjIir2eiQ7p3ktr4L7iae0odzFkW/XHam5ZJP+v9cCMLzY6zNO
44x9Z85jZ9w34GcZ4D7D0OmTHbcDpcxckPXSFco/dK4IyYeLzUImYXEYo41YJEx9
O4sSQMBqIyjMXej/oKBhgKHSWaV60XimvQvTvhpjXGD/45bt9sx4ZNVTi8+xVMbw
jpktMsQcsjHctcIY2D2eUR61Ma/Vg9t6Qih51YMtbq6Nqcyhw2IKvDwIx3kQuW34
qSW7wsyn+RfHQDpwjPgDG/6OE815Pbtzlxz+y6tB9pN88IWkA1H5Jh2CQRlMBud2
2nVQRpqPgr9uOIeNnNI7FFd1LgTIc/v7lDPfpUH9KelOs7cGWvaRymkuhPSvWxRI
tmjlMdFq8XcjrOPieA9WpxYKXinqj4wNXtnYGyaM+Ur/P3qWaj18PMCYMbeN6pJC
eNYEJVk2Mt8GmiPL55aYG5+Z1F8sciLKbz8TFq5ya2z0EnSbyVvR+DReqd7zRzh6
Bmbmx9isAzN6wWNszNt7f8XSgRPV2Ri1tvb1vixk3JLxyx2iVCUL6KJ0cZOUNy0x
nQqy7/zMtBsFGZ/Ca8f2kpVaGgxkUFy7n1rI4psXTGBOVlnJyMz3WSi9N8F/uJg0
Ca5W4493+txdyHSAmWBQAQuZp3RJOlhTkXe5dfjukv6Rnnw1MZU=
=Hr3D
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx updates from Dave Hansen:
- Fix a race window where load_unaligned_zeropad() could cause a fatal
shutdown during TDX private<=>shared conversion
The race has never been observed in practice but might allow
load_unaligned_zeropad() to catch a TDX page in the middle of its
conversion process which would lead to a fatal and unrecoverable
guest shutdown.
- Annotate sites where VM "exit reasons" are reused as hypercall
numbers.
* tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix enc_status_change_finish_noop()
x86/tdx: Fix race between set_memory_encrypted() and load_unaligned_zeropad()
x86/mm: Allow guest.enc_status_change_prepare() to fail
x86/tdx: Wrap exit reason with hcall_func()
-----BEGIN PGP SIGNATURE-----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=17jK
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Dave Hansen:
"Allow CPUs in SGX/HPE Ultraviolet to start using Sub-NUMA clustering
(SNC) mode. SNC has been around outside the UV world for a while but
evidently never worked on UV systems.
SNC is rather notorious for breaking bad assumptions of a 1:1
relationship between physical sockets and NUMA nodes. The UV code was
rather prolific with these assumptions and took quite a bit of
refactoring to remove them"
* tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Update UV[23] platform code for SNC
x86/platform/uv: Remove remaining BUG_ON() and BUG() calls
x86/platform/uv: UV support for sub-NUMA clustering
x86/platform/uv: Helper functions for allocating and freeing conversion tables
x86/platform/uv: When searching for minimums, start at INT_MAX not 99999
x86/platform/uv: Fix printed information in calc_mmioh_map
x86/platform/uv: Introduce helper function uv_pnode_to_socket.
x86/platform/uv: Add platform resolving #defines for misc GAM_MMIOH_REDIRECT*
and assert __x86_return_thunk's alignment so that future changes to
the symbol macros do not accidentally break them.
- Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is
pointless
-----BEGIN PGP SIGNATURE-----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=LcUq
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Compute the purposeful misalignment of zen_untrain_ret automatically
and assert __x86_return_thunk's alignment so that future changes to
the symbol macros do not accidentally break them.
- Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is
pointless
* tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retbleed: Add __x86_return_thunk alignment checks
x86/cpu: Remove X86_FEATURE_NAMES
x86/Kconfig: Make X86_FEATURE_NAMES non-configurable in prompt
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using it
and thus preventing a whole set of attacks against such guests like
memory replay and the like.
There are a couple of strategies of how memory should be accepted
- the current implementation does an on-demand way of accepting.
-----BEGIN PGP SIGNATURE-----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=FS95
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
of application containers with dynamically changing task lists
- When reading the tasks file, show the tasks' pid which are only in
the current namespace as opposed to showing the pids from the init
namespace too
- Other fixes and improvements
-----BEGIN PGP SIGNATURE-----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=nu66
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Implement a rename operation in resctrlfs to facilitate handling of
application containers with dynamically changing task lists
- When reading the tasks file, show the tasks' pid which are only in
the current namespace as opposed to showing the pids from the init
namespace too
- Other fixes and improvements
* tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Documentation for MON group move feature
x86/resctrl: Implement rename op for mon groups
x86/resctrl: Factor rdtgroup lock for multi-file ops
x86/resctrl: Only show tasks' pid in current pid namespace
other tooling and thus a slimmer binary is generated. This is
important for distros who have to distribute vmlinux blobs with their
kernel packages too and that extraneous unnecessary data bloats them
for no good reason
-----BEGIN PGP SIGNATURE-----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=k9Pz
-----END PGP SIGNATURE-----
Merge tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Borislav Petkov:
- Remove relocation information from vmlinux as it is not needed by
other tooling and thus a slimmer binary is generated.
This is important for distros who have to distribute vmlinux blobs
with their kernel packages too and that extraneous unnecessary data
bloats them for no good reason
* tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Avoid relocation information in final vmlinux
of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple
that dependency in the kernel code too
- Teach the alternatives machinery to handle relocations
- Make debug_alternative accept flags in order to see only that set of
patching done one is interested in
- Other fixes, cleanups and optimizations to the patching code
-----BEGIN PGP SIGNATURE-----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=mH38
-----END PGP SIGNATURE-----
Merge tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction alternatives updates from Borislav Petkov:
- Up until now the Fast Short Rep Mov optimizations implied the
presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
setting so decouple that dependency in the kernel code too
- Teach the alternatives machinery to handle relocations
- Make debug_alternative accept flags in order to see only that set of
patching done one is interested in
- Other fixes, cleanups and optimizations to the patching code
* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: PAUSE is not a NOP
x86/alternatives: Add cond_resched() to text_poke_bp_batch()
x86/nospec: Shorten RESET_CALL_DEPTH
x86/alternatives: Add longer 64-bit NOPs
x86/alternatives: Fix section mismatch warnings
x86/alternative: Optimize returns patching
x86/alternative: Complicate optimize_nops() some more
x86/alternative: Rewrite optimize_nops() some
x86/lib/memmove: Decouple ERMS from FSRM
x86/alternative: Support relocations in alternatives
x86/alternative: Make debug-alternative selective
ext4_free_blocks will retrieve block from bh if block parameter is zero.
Retrieve block before ext4_free_blocks_simple to avoid potentially
passing wrong block to ext4_free_blocks_simple.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230603150327.3596033-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Those GPUs and CPUs are connected together through the coherent fabric
and the GPU memory controllers report errors through x86's MCA so EDAC
needs to support them. The amd64_edac driver supports now HBM (High
Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=Vcif
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add initial support for RAS hardware found on AMD server GPUs (MI200).
Those GPUs and CPUs are connected together through the coherent
fabric and the GPU memory controllers report errors through x86's MCA
so EDAC needs to support them. The amd64_edac driver supports now HBM
(High Bandwidth Memory) and thus such heterogeneous memory controller
systems
- Other small cleanups and improvements
* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/amd64: Cache and use GPU node map
EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
EDAC/amd64: Document heterogeneous system enumeration
x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
x86/amd_nb: Re-sort and re-indent PCI defines
x86/amd_nb: Add MI200 PCI IDs
ras/debugfs: Fix error checking for debugfs_create_dir()
x86/MCE: Check a hw error's address to determine proper recovery action
- amd64_edac: Remove the version string as it is useless and actively
confusing when looking at backported versions of the driver
- Add a driver for the Nuvoton NPCM memory controller
- A debugfs error checking cleanup
-----BEGIN PGP SIGNATURE-----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=e4qx
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for Zen4 client hardware
- amd64_edac: Remove the version string as it is useless and actively
confusing when looking at backported versions of the driver
- Add a driver for the Nuvoton NPCM memory controller
- A debugfs error checking cleanup
* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/npcm: Add NPCM memory controller driver
dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
EDAC/thunderx: Check debugfs file creation retval properly
EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
EDAC/amd64: Remove module version string
- Ensure that the WBINVD in stop_this_cpu() has been completed before the
control CPU proceedes.
stop_this_cpu() is used for kexec(), reboot and shutdown to park the APs
in a HLT loop.
The control CPU sends an IPI to the APs and waits for their CPU online bits
to be cleared. Once they all are marked "offline" it proceeds.
But stop_this_cpu() clears the CPU online bit before issuing WBINVD,
which means there is no guarantee that the AP has reached the HLT loop.
This was reported to cause intermittent reboot/shutdown failures due to
some dubious interaction with the firmware.
This is not only a problem of WBINVD. The code to actually "stop" the
CPU which runs between clearing the online bit and reaching the HLT loop
can cause large enough delays on its own (think virtualization). That's
especially dangerous for kexec() as kexec() expects that all APs are in
a safe state and not executing code while the boot CPU jumps to the new
kernel. There are more issues vs. kexec() which are addressed separately.
Cure this by implementing an explicit synchronization point right before
the AP reaches HLT. This guarantees that the AP has completed the full
stop proceedure.
- Fix the condition for WBINVD in stop_this_cpu().
The WBINVD in stop_this_cpu() is required for ensuring that when
switching to or from memory encryption no dirty data is left in the
cache lines which might cause a write back in the wrong more later.
This checks CPUID directly because the feature bit might have been
cleared due to a command line option.
But that CPUID check accesses leaf 0x8000001f::EAX unconditionally. Intel
CPUs return the content of the highest supported leaf when a non-existing
leaf is read, while AMD CPUs return all zeros for unsupported leafs.
So the result of the test on Intel CPUs is lottery and on AMD its just
correct by chance.
While harmless it's incorrect and causes the conditional wbinvd() to be
issued where not required, which caused the above issue to be unearthed.
- Make kexec() robust against AP code execution
Ashok observed triple faults when doing kexec() on a system which had
been booted with "nosmt".
It turned out that the SMT siblings which had been brought up partially
are parked in mwait_play_dead() to enable power savings.
mwait_play_dead() is monitoring the thread flags of the AP's idle task,
which has been chosen as it's unlikely to be written to.
But kexec() can overwrite the previous kernel text and data including
page tables etc. When it overwrites the cache lines monitored by an AP
that AP resumes execution after the MWAIT on eventually overwritten
text, stack and page tables, which obviously might end up in a triple
fault easily.
Make this more robust in several steps:
1) Use an explicit per CPU cache line for monitoring.
2) Write a command to these cache lines to kick APs out of MWAIT before
proceeding with kexec(), shutdown or reboot.
The APs confirm the wakeup by writing status back and then enter a
HLT loop.
3) If the system uses INIT/INIT/STARTUP for AP bringup, park the APs
in INIT state.
HLT is not a guarantee that an AP won't wake up and resume
execution. HLT is woken up by NMI and SMI. SMI puts the CPU back
into HLT (+/- firmware bugs), but NMI is delivered to the CPU which
executes the NMI handler. Same issue as the MWAIT scenario described
above.
Sending an INIT/INIT sequence to the APs puts them into wait for
STARTUP state, which is safe against NMI.
There is still an issue remaining which can't be fixed: #MCE
If the AP sits in HLT and receives a broadcast #MCE it will try to
handle it with the obvious consequences.
INIT/INIT clears CR4.MCE in the AP which will cause a broadcast #MCE to
shut down the machine.
So there is a choice between fire (HLT) and frying pan (INIT). Frying
pan has been chosen as it's at least preventing the NMI issue.
On systems which are not using INIT/INIT/STARTUP there is not much
which can be done right now, but at least the obvious and easy to
trigger MWAIT issue has been addressed.
-----BEGIN PGP SIGNATURE-----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=KgZ0
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
"A set of fixes for kexec(), reboot and shutdown issues:
- Ensure that the WBINVD in stop_this_cpu() has been completed before
the control CPU proceedes.
stop_this_cpu() is used for kexec(), reboot and shutdown to park
the APs in a HLT loop.
The control CPU sends an IPI to the APs and waits for their CPU
online bits to be cleared. Once they all are marked "offline" it
proceeds.
But stop_this_cpu() clears the CPU online bit before issuing
WBINVD, which means there is no guarantee that the AP has reached
the HLT loop.
This was reported to cause intermittent reboot/shutdown failures
due to some dubious interaction with the firmware.
This is not only a problem of WBINVD. The code to actually "stop"
the CPU which runs between clearing the online bit and reaching the
HLT loop can cause large enough delays on its own (think
virtualization). That's especially dangerous for kexec() as kexec()
expects that all APs are in a safe state and not executing code
while the boot CPU jumps to the new kernel. There are more issues
vs kexec() which are addressed separately.
Cure this by implementing an explicit synchronization point right
before the AP reaches HLT. This guarantees that the AP has
completed the full stop proceedure.
- Fix the condition for WBINVD in stop_this_cpu().
The WBINVD in stop_this_cpu() is required for ensuring that when
switching to or from memory encryption no dirty data is left in the
cache lines which might cause a write back in the wrong more later.
This checks CPUID directly because the feature bit might have been
cleared due to a command line option.
But that CPUID check accesses leaf 0x8000001f::EAX unconditionally.
Intel CPUs return the content of the highest supported leaf when a
non-existing leaf is read, while AMD CPUs return all zeros for
unsupported leafs.
So the result of the test on Intel CPUs is lottery and on AMD its
just correct by chance.
While harmless it's incorrect and causes the conditional wbinvd()
to be issued where not required, which caused the above issue to be
unearthed.
- Make kexec() robust against AP code execution
Ashok observed triple faults when doing kexec() on a system which
had been booted with "nosmt".
It turned out that the SMT siblings which had been brought up
partially are parked in mwait_play_dead() to enable power savings.
mwait_play_dead() is monitoring the thread flags of the AP's idle
task, which has been chosen as it's unlikely to be written to.
But kexec() can overwrite the previous kernel text and data
including page tables etc. When it overwrites the cache lines
monitored by an AP that AP resumes execution after the MWAIT on
eventually overwritten text, stack and page tables, which obviously
might end up in a triple fault easily.
Make this more robust in several steps:
1) Use an explicit per CPU cache line for monitoring.
2) Write a command to these cache lines to kick APs out of MWAIT
before proceeding with kexec(), shutdown or reboot.
The APs confirm the wakeup by writing status back and then
enter a HLT loop.
3) If the system uses INIT/INIT/STARTUP for AP bringup, park the
APs in INIT state.
HLT is not a guarantee that an AP won't wake up and resume
execution. HLT is woken up by NMI and SMI. SMI puts the CPU
back into HLT (+/- firmware bugs), but NMI is delivered to the
CPU which executes the NMI handler. Same issue as the MWAIT
scenario described above.
Sending an INIT/INIT sequence to the APs puts them into wait
for STARTUP state, which is safe against NMI.
There is still an issue remaining which can't be fixed: #MCE
If the AP sits in HLT and receives a broadcast #MCE it will try to
handle it with the obvious consequences.
INIT/INIT clears CR4.MCE in the AP which will cause a broadcast
#MCE to shut down the machine.
So there is a choice between fire (HLT) and frying pan (INIT).
Frying pan has been chosen as it's at least preventing the NMI
issue.
On systems which are not using INIT/INIT/STARTUP there is not much
which can be done right now, but at least the obvious and easy to
trigger MWAIT issue has been addressed"
* tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Put CPUs into INIT on shutdown if possible
x86/smp: Split sending INIT IPI out into a helper function
x86/smp: Cure kexec() vs. mwait_play_dead() breakage
x86/smp: Use dedicated cache-line for mwait_play_dead()
x86/smp: Remove pointless wmb()s from native_stop_other_cpus()
x86/smp: Dont access non-existing CPUID leaf
x86/smp: Make stop_other_cpus() more robust
- Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN in
the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
- Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=hRV9
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
- Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes it
clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup.
-----BEGIN PGP SIGNATURE-----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=yxMj
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Initialize FPU late.
Right now FPU is initialized very early during boot. There is no real
requirement to do so. The only requirement is to have it done before
alternatives are patched.
That's done in check_bugs() which does way more than what the function
name suggests.
So first rename check_bugs() to arch_cpu_finalize_init() which makes
it clear what this is about.
Move the invocation of arch_cpu_finalize_init() earlier in
start_kernel() as it has to be done before fork_init() which needs to
know the FPU register buffer size.
With those prerequisites the FPU initialization can be moved into
arch_cpu_finalize_init(), which removes it from the early and fragile
part of the x86 bringup"
* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
x86/fpu: Mark init functions __init
x86/fpu: Remove cpuinfo argument from init functions
x86/init: Initialize signal frame size late
init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
init: Invoke arch_cpu_finalize_init() earlier
init: Remove check_bugs() leftovers
um/cpu: Switch to arch_cpu_finalize_init()
sparc/cpu: Switch to arch_cpu_finalize_init()
sh/cpu: Switch to arch_cpu_finalize_init()
mips/cpu: Switch to arch_cpu_finalize_init()
m68k/cpu: Switch to arch_cpu_finalize_init()
loongarch/cpu: Switch to arch_cpu_finalize_init()
ia64/cpu: Switch to arch_cpu_finalize_init()
ARM: cpu: Switch to arch_cpu_finalize_init()
x86/cpu: Switch to arch_cpu_finalize_init()
init: Provide arch_cpu_finalize_init()
- Core:
- Convert the interrupt descriptor storage to a maple tree to overcome
the limitations of the radixtree + fixed size bitmap. This allows to
handle real large servers with a huge number of guests without
imposing a huge memory overhead on everyone.
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue.
- Drivers:
- A set of fixes and updates for the Loongson/Loongarch related drivers.
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation.
- The usual set of boring fixes and updates all over the place.
-----BEGIN PGP SIGNATURE-----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=qKCo
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Convert the interrupt descriptor storage to a maple tree to
overcome the limitations of the radixtree + fixed size bitmap.
This allows us to handle very large servers with a huge number of
guests without imposing a huge memory overhead on everyone
- Implement optional retriggering of interrupts which utilize the
fasteoi handler to work around a GICv3 architecture issue
Drivers:
- A set of fixes and updates for the Loongson/Loongarch related
drivers
- Workaound for an ASR8601 integration hickup which ends up with CPU
numbering which can't be represented in the GIC implementation
- The usual set of boring fixes and updates all over the place"
* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
irqchip/stm32-exti: Fix warning on initialized field overwritten
irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
irqchip/mxs: Include linux/irqchip/mxs.h
irqchip/clps711x: Remove unused clps711x_intc_init() function
irqchip/mmp: Remove non-DT codepath
irqchip/ftintc010: Mark all function static
irqdomain: Include internals.h for function prototypes
irqchip/loongson-eiointc: Add DT init support
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Fix irq affinity setting during resume
irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
irqchip/loongson-liointc: Fix IRQ trigger polarity
irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
irqchip/loongson-pch-pic: Fix initialization of HT vector register
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
...
- Recheck whether debug objects is enabled before reporting a problem to
avoid spamming the logs with messages which are caused by a concurrent
OOM.
-----BEGIN PGP SIGNATURE-----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=bxLt
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects update from Thomas Gleixner:
"A single update for debug objects:
- Recheck whether debug objects is enabled before reporting a problem
to avoid spamming the logs with messages which are caused by a
concurrent OOM"
* tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Recheck debug_objects_enabled before reporting
-----BEGIN PGP SIGNATURE-----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=wxop
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Allow slightly larger IPVS connection table size from Kconfig for
64-bit arch, from Abhijeet Rastogi.
2) Since IPVS connection table might be larger than 2^20 after previous
patch, allow to limit it depending on the available memory.
Moreover, use kvmalloc. From Julian Anastasov.
3) Do not rebuild VLAN header in nft_payload when matching source and
destination MAC address.
4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal.
5) Allow to update set size, also from Florian.
6) Improve NAT tuple selection when connection is closing,
from Florian Westphal.
7) Support for resetting set element stateful expression, from Phil Sutter.
8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables,
from Florian Westphal.
* tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: limit allowed range via nla_policy
netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET
netfilter: snat: evict closing tcp entries on reply tuple collision
netfilter: nf_tables: permit update of set size
netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test
netfilter: nft_payload: rebuild vlan header when needed
ipvs: dynamically limit the connection hash table
ipvs: increase ip_vs_conn_tab_bits range for 64BIT
====================
Link: https://lore.kernel.org/r/20230626064749.75525-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
-----BEGIN PGP SIGNATURE-----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=5Me8
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Nothing major in this release, just a bunch of cleanups and some
optimizations around networking mostly.
- clean up file request flags handling (Christoph)
- clean up request freeing and CQ locking (Pavel)
- support for using pre-registering the io_uring fd at setup time
(Josh)
- Add support for user allocated ring memory, rather than having the
kernel allocate it. Mostly for packing rings into a huge page (me)
- avoid an unnecessary double retry on receive (me)
- maintain ordering for task_work, which also improves performance
(me)
- misc cleanups/fixes (Pavel, me)"
* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
io_uring: merge conditional unlock flush helpers
io_uring: make io_cq_unlock_post static
io_uring: inline __io_cq_unlock
io_uring: fix acquire/release annotations
io_uring: kill io_cq_unlock()
io_uring: remove IOU_F_TWQ_FORCE_NORMAL
io_uring: don't batch task put on reqs free
io_uring: move io_clean_op()
io_uring: inline io_dismantle_req()
io_uring: remove io_free_req_tw
io_uring: open code io_put_req_find_next
io_uring: add helpers to decode the fixed file file_ptr
io_uring: use io_file_from_index in io_msg_grab_file
io_uring: use io_file_from_index in __io_sync_cancel
io_uring: return REQ_F_ flags from io_file_get_flags
io_uring: remove io_req_ffs_set
io_uring: remove a confusing comment above io_file_get_flags
io_uring: remove the mode variable in io_file_get_flags
io_uring: remove __io_file_supports_nowait
io_uring: wait interruptibly for request completions on exit
...
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
-----BEGIN PGP SIGNATURE-----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=nN4X
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mainly core changes, refactoring and optimizations.
Performance is improved in some areas, overall there may be a
cumulative improvement due to refactoring that removed lookups in the
IO path or simplified IO submission tracking.
Core:
- submit IO synchronously for fast checksums (crc32c and xxhash),
remove high priority worker kthread
- read extent buffer in one go, simplify IO tracking, bio submission
and locking
- remove additional tracking of redirtied extent buffers, originally
added for zoned mode but actually not needed
- track ordered extent pointer in bio to avoid rbtree lookups during
IO
- scrub, use recovered data stripes as cache to avoid unnecessary
read
- in zoned mode, optimize logical to physical mappings of extents
- remove PageError handling, not set by VFS nor writeback
- cleanups, refactoring, better structure packing
- lots of error handling improvements
- more assertions, lockdep annotations
- print assertion failure with the exact line where it happens
- tracepoint updates
- more debugging prints
Performance:
- speedup in fsync(), better tracking of inode logged status can
avoid transaction commit
- IO path structures track logical offsets in data structures and
does not need to look it up
User visible changes:
- don't commit transaction for every created subvolume, this can
reduce time when many subvolumes are created in a batch
- print affected files when relocation fails
- trigger orphan file cleanup during START_SYNC ioctl
Notable fixes:
- fix crash when disabling quota and relocation
- fix crashes when removing roots from drity list
- fix transacion abort during relocation when converting from newer
profiles not covered by fallback
- in zoned mode, stop reclaiming block groups if filesystem becomes
read-only
- fix rare race condition in tree mod log rewind that can miss some
btree node slots
- with enabled fsverity, drop up-to-date page bit in case the
verification fails"
* tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (194 commits)
btrfs: fix race between quota disable and relocation
btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots
btrfs: fix race when deleting free space root from the dirty cow roots list
btrfs: fix race when deleting quota root from the dirty cow roots list
btrfs: tracepoints: also show actual number of the outstanding extents
btrfs: update i_version in update_dev_time
btrfs: make btrfs_compressed_bioset static
btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers
btrfs: scrub: remove scrub_ctx::csum_list member
btrfs: do not BUG_ON after failure to migrate space during truncation
btrfs: do not BUG_ON on failure to get dir index for new snapshot
btrfs: send: do not BUG_ON() on unexpected symlink data extent
btrfs: do not BUG_ON() when dropping inode items from log root
btrfs: replace BUG_ON() at split_item() with proper error handling
btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()
btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()
btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()
btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()
btrfs: abort transaction at update_ref_for_cow() when ref count is zero
...
- Modify the synchronous direct write path to use iomap instead of
manually coding issuing zone append write BIOs, from me.
- Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
IO instead of using the old way with noop direct_io methods, from
Christoph.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZJmJMQAKCRDdoc3SxdoY
dqN9AQDYcY/WzK3eZWqgseXOoLBLibpCRE+SjoMFp4/hN47BDAD+I6owLtp3zyLi
1+Wcdlsdr/i2NEsSfbYDUPI/33xlTww=
=mj70
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
- Modify the synchronous direct write path to use iomap instead of
manually coding issuing zone append write BIOs (me)
- Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
IO instead of using the old way with noop direct_io methods
(Christoph)
* tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
zonefs: use iomap for synchronous direct writes
- Fix rare I/O hang on deduplicated compressed images due to loop
hooked chains;
- Fix compact compression layout of 16k blocks on arm64 devices;
- Fix atomic context detection of async decompression;
- Decompression/Xattr code cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCZJjfSREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBPXVAQCQqmieRIbW84N6l4eonzoljoxRLCeDsjEn
R0qTaT66GQEA3ZZvwFPmuOgdSGadsvradYdLuL389U5y12P3l0BwRwY=
=ffx+
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"No outstanding new feature for this cycle.
Most of these commits are decompression cleanups which are part of the
ongoing development for subpage/folio compression support as well as
xattr cleanups for the upcoming xattr bloom filter optimization [1].
In addition, there are bugfixes to address some corner cases of
compressed images due to global data de-duplication and arm64 16k
pages.
Summary:
- Fix rare I/O hang on deduplicated compressed images due to loop
hooked chains
- Fix compact compression layout of 16k blocks on arm64 devices
- Fix atomic context detection of async decompression
- Decompression/Xattr code cleanups"
Link: https://lore.kernel.org/r/20230621083209.116024-1-jefflexu@linux.alibaba.com [1]
* tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up zmap.c
erofs: remove unnecessary goto
erofs: Fix detection of atomic context
erofs: use separate xattr parsers for listxattr/getxattr
erofs: unify inline/shared xattr iterators for listxattr/getxattr
erofs: make the size of read data stored in buffer_ofs
erofs: unify xattr_iter structures
erofs: use absolute position in xattr iterator
erofs: fix compact 4B support for 16k block size
erofs: convert erofs_read_metabuf() to erofs_bread() for xattr
erofs: use poison pointer to replace the hard-coded address
erofs: use struct lockref to replace handcrafted approach
erofs: adapt managed inode operations into folios
erofs: kill hooked chains to avoid loops on deduplicated compressed images
erofs: avoid on-stack pagepool directly passed by arguments
erofs: allocate extra bvec pages directly instead of retrying
erofs: clean up z_erofs_pcluster_readmore()
erofs: remove the member readahead from struct z_erofs_decompress_frontend
erofs: fold in z_erofs_decompress()
Several updates for fs/verity/:
- Do all hashing with the shash API instead of with the ahash API. This
simplifies the code and reduces API overhead. It should also make
things slightly easier for XFS's upcoming support for fsverity. It
does drop fsverity's support for off-CPU hash accelerators, but that
support was incomplete and not known to be used.
- Update and export fsverity_get_digest() so that it's ready for
overlayfs's upcoming support for fsverity checking of lowerdata.
- Improve the documentation for builtin signature support.
- Fix a bug in the large folio support.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZJjsWRQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK0IsAQCZ9ZP2U0DqLKV025LzcU9epUdS30xJ
U7WOs8gP63pH4QEAqbU1O6bVhEzdFWGzq5gdzdLePWjOyHrGCVcR2u+fgw4=
=ptAR
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"Several updates for fs/verity/:
- Do all hashing with the shash API instead of with the ahash API.
This simplifies the code and reduces API overhead. It should also
make things slightly easier for XFS's upcoming support for
fsverity. It does drop fsverity's support for off-CPU hash
accelerators, but that support was incomplete and not known to be
used
- Update and export fsverity_get_digest() so that it's ready for
overlayfs's upcoming support for fsverity checking of lowerdata
- Improve the documentation for builtin signature support
- Fix a bug in the large folio support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: improve documentation for builtin signature support
fsverity: rework fsverity_get_digest() again
fsverity: simplify error handling in verify_data_block()
fsverity: don't use bio_first_page_all() in fsverity_verify_bio()
fsverity: constify fsverity_hash_alg
fsverity: use shash API instead of ahash API
Just one flex array conversion patch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZJjnMhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK5UTAP97F43BucDp2X1Yq27phZBGGNMuZBDV
0wFxpW7IDC1WHQD+N9HQmxv+euDHD0elSf/fHWcsLuvApJA/6NTY8YDuugo=
=Oy2c
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt update from Eric Biggers:
"Just one flex array conversion patch"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace 1-element array with flexible array
Fixes and clean-ups include:
- Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES
- Better NUMA awareness when allocating pages and other objects
- A number of minor clean-ups to XDR encoding
- Elimination of a race when accepting a TCP socket
- Numerous observability enhancements
-----BEGIN PGP SIGNATURE-----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=1EQc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Clean-ups in the READ path in anticipation of MSG_SPLICE_PAGES
- Better NUMA awareness when allocating pages and other objects
- A number of minor clean-ups to XDR encoding
- Elimination of a race when accepting a TCP socket
- Numerous observability enhancements
* tag 'nfsd-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (46 commits)
nfsd: remove redundant assignments to variable len
svcrdma: Fix stale comment
NFSD: Distinguish per-net namespace initialization
nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
SUNRPC: Address RCU warning in net/sunrpc/svc.c
SUNRPC: Use sysfs_emit in place of strlcpy/sprintf
SUNRPC: Remove transport class dprintk call sites
SUNRPC: Fix comments for transport class registration
svcrdma: Remove an unused argument from __svc_rdma_put_rw_ctxt()
svcrdma: trace cc_release calls
svcrdma: Convert "might sleep" comment into a code annotation
NFSD: Add an nfsd4_encode_nfstime4() helper
SUNRPC: Move initialization of rq_stime
SUNRPC: Optimize page release in svc_rdma_sendto()
svcrdma: Prevent page release when nothing was received
svcrdma: Revert 2a1e4f21d841 ("svcrdma: Normalize Send page handling")
SUNRPC: Revert 579900670ac7 ("svcrdma: Remove unused sc_pages field")
SUNRPC: Revert cc93ce9529a6 ("svcrdma: Retain the page backing rq_res.head[0].iov_base")
NFSD: add encoding of op_recall flag for write delegation
NFSD: Add "official" reviewers for this subsystem
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU3/AAKCRCRxhvAZXjc
ov1bAQDT+i3l8jS+r1HGVBuZHz2bPPkrk3ch+xGU9V/iBhrGtAD7BaogZ5OaeJP0
A1CQecON51Tq79Nw+EgEBLcRJ/xhXAQ=
=v3md
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4WgAKCRCRxhvAZXjc
oofvAQDs9RJwQUyWHJmQA+tWz5cUE5DviVWCwwul5dQRRCqgaQEA2OIO0gPFaVoq
1OYOeLyUjl/cpS8e3u4uJtw34jttdQA=
=AwcR
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains Amir's work to fix a long-standing problem where an
unprivileged overlayfs mount can be used to avoid fanotify permission
events that were requested for an inode or superblock on the
underlying filesystem.
Some background about files opened in overlayfs. If a file is opened
in overlayfs @file->f_path will refer to a "fake" path. What this
means is that while @file->f_inode will refer to inode of the
underlying layer, @file->f_path refers to an overlayfs
{dentry,vfsmount} pair. The reasons for doing this are out of scope
here but it is the reason why the vfs has been providing the
open_with_fake_path() helper for overlayfs for very long time now. So
nothing new here.
This is for sure not very elegant and everyone including the overlayfs
maintainers agree. Improving this significantly would involve more
fragile and potentially rather invasive changes.
In various codepaths access to the path of the underlying filesystem
is needed for such hybrid file. The best example is fsnotify where
this becomes security relevant. Passing the overlayfs
@file->f_path->dentry will cause fsnotify to skip generating fsnotify
events registered on the underlying inode or superblock.
To fix this we extend the vfs provided open_with_fake_path() concept
for overlayfs to create a backing file container that holds the real
path and to expose a helper that can be used by relevant callers to
get access to the path of the underlying filesystem through the new
file_real_path() helper. This pattern is similar to what we do in
d_real() and d_real_inode().
The first beneficiary is fsnotify and fixes the security sensitive
problem mentioned above.
There's a couple of nice cleanups included as well.
Over time, the old open_with_fake_path() helper added specifically for
overlayfs a long time ago started to get used in other places such as
cachefiles. Even though cachefiles have nothing to do with hybrid
files.
The only reason cachefiles used that concept was that files opened
with open_with_fake_path() aren't charged against the caller's open
file limit by raising FMODE_NOACCOUNT. It's just mere coincidence that
both overlayfs and cachefiles need to ensure to not overcharge the
caller for their internal open calls.
So this work disentangles FMODE_NOACCOUNT use cases and backing file
use-cases by adding the FMODE_BACKING flag which indicates that the
file can be used to retrieve the backing file of another filesystem.
(Fyi, Jens will be sending you a really nice cleanup from Christoph
that gets rid of 3 FMODE_* flags otherwise this would be the last
fmode_t bit we'd be using.)
So now overlayfs becomes the sole user of the renamed
open_with_fake_path() helper which is now named backing_file_open().
For internal kernel users such as cachefiles that are only interested
in FMODE_NOACCOUNT but not in FMODE_BACKING we add a new
kernel_file_open() helper which opens a file without being charged
against the caller's open file limit. All new helpers are properly
documented and clearly annotated to mention their special uses.
We also rename vfs_tmpfile_open() to kernel_tmpfile_open() to clearly
distinguish it from vfs_tmpfile() and align it the other kernel_*()
internal helpers"
* tag 'v6.5/vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: enable fsnotify events on underlying real files
fs: use backing_file container for internal files with "fake" f_path
fs: move kmem_cache_zalloc() into alloc_empty_file*() helpers
fs: use a helper for opening kernel internal files
fs: rename {vfs,kernel}_tmpfile_open()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU4NwAKCRCRxhvAZXjc
ordqAP0RmZEkUA5p98pK+0FEFIsS2S8qChh6YHQHP+hF606FGgEAivb3UPRm9p58
kRb5yK0/oXDUxGv7A+x+SIMVbcRyLgw=
=pi6N
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rename locking updates from Christian Brauner:
"This contains the work from Jan to fix problems with cross-directory
renames originally reported in [1].
To quickly sum it up some filesystems (so far we know at least about
ext4, udf, f2fs, ocfs2, likely also reiserfs, gfs2 and others) need to
lock the directory when it is being renamed into another directory.
This is because we need to update the parent pointer in the directory
in that case and if that races with other operations on the directory,
in particular a conversion from one directory format into another, bad
things can happen.
So far we've done the locking in the filesystem code but recently
Darrick pointed out in [2] that the RENAME_EXCHANGE case was missing.
That one is particularly nasty because RENAME_EXCHANGE can arbitrarily
mix regular files and directories and proper lock ordering is not
achievable in the filesystems alone.
This patch set adds locking into vfs_rename() so that not only parent
directories but also moved inodes, regardless of whether they are
directories or not, are locked when calling into the filesystem.
This means establishing a locking order for unrelated directories. New
helpers are added for this purpose and our documentation is updated to
cover this in detail.
The locking is now actually easier to follow as we now always lock
source and target. We've always locked the target independent of
whether it was a directory or file and we've always locked source if
it was a regular file. The exact details for why this came about can
be found in [3] and [4]"
Link: https://lore.kernel.org/all/20230117123735.un7wbamlbdihninm@quack3 [1]
Link: https://lore.kernel.org/all/20230517045836.GA11594@frogsfrogsfrogs [2]
Link: https://lore.kernel.org/all/20230526-schrebergarten-vortag-9cd89694517e@brauner [3]
Link: https://lore.kernel.org/all/20230530-seenotrettung-allrad-44f4b00139d4@brauner [4]
* tag 'v6.5/vfs.rename.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Restrict lock_two_nondirectories() to non-directory inodes
fs: Lock moved directories
fs: Establish locking order for unrelated directories
Revert "f2fs: fix potential corruption when moving a directory"
Revert "udf: Protect rename against modification of moved directory"
ext4: Remove ext4 locking of moved directory
Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmSZrHQACgkQqDIjiipP
6E9yrAf+KD4AO8piKP8RoFAwM5TDHz7lQFsf9kcIHA4OjDG9HYG7nV9Y3zlVRb5S
q4M/e69OCmQBWkntAuNwf3szl5ear7tutJjZb8pCKqQEp83gjyHnK3CrhGYTTFq4
CWafhhsXhZX9a0twtPoXCO4xD1jxay1Viv0I4uWB8QcNuQbDHYJP9eQtGkppn4ql
RRYZiYrlsjQ1uyylZ3fEbwcRGT6OGws5xSAhvya+MaU/czEWbjUFpJu37RGobvZ9
AI8GL4RD46IMsIvrb9xULJu3Fh5j+0Paj7hi6YGQqWPrKvhSFJ8cwc5M0oazslB3
P02n345laVmGvSskpT64nGZ2ArKr/Q==
=ZMIC
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.5-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Pull thermal control updates for 6.5-rc1 from Daniel Lezcano:
"- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)"
* tag 'thermal-v6.5-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (38 commits)
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/stm32: Convert to platform remove callback returning void
net/mlx5: Update the driver with the recent thermal changes
thermal/drivers/armada: Add support for AP807 thermal data
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/qoriq: Support version 2.1
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: No need to program site adjustment register
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
...
Baokun Li
Ojaswin Mujoo
Ritesh Harjani
Kemeng Shi
Linus Torvalds
Dmitry Torokhov
Jakub Kicinski
Rafael J. Wysocki