IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
My mainline commit c48a7c44a1 ("docs: kernel_feat.py: fix potential
command injection") contains a bug which can manifests like this when
building the documentation:
Sphinx parallel build error:
UnboundLocalError: local variable 'fname' referenced before assignment
make[2]: *** [Documentation/Makefile:102: htmldocs] Error 2
However, this only appears when there exists a '.. kernel-feat::'
directive that points to a non-existent file, which isn't the case in
mainline.
When this commit was backported to stable 6.6, it didn't change
Documentation/arch/ia64/features.rst since ia64 was removed in 6.7 in
commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture"). This
lead to the build failure seen above -- but only in stable kernels.
This patch fixes the backport and should only be applied to kernels where
Documentation/arch/ia64/features.rst exists and commit c48a7c44a1 has
also been applied.
A second patch will follow to fix kernel_feat.py in mainline so that it
doesn't error out when the '.. kernel-feat::' directive points to a
nonexistent file.
Link: https://lore.kernel.org/all/ZbkfGst991YHqJHK@fedora64.linuxtx.org/
Fixes: e961f8c696 ("docs: kernel_feat.py: fix potential command injection") # stable 6.6.15
Reported-by: Justin Forbes <jforbes@fedoraproject.org>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f827bcdafa upstream.
Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull LoongArch fixes from Huacai Chen:
"Fix lockdep, fix a boot failure, fix some build warnings, fix document
links, and some cleanups"
* tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Update the links of ABI
docs/LoongArch: Update the links of ABI
LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem()
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
LoongArch: Set all reserved memblocks on Node#0 at initialization
LoongArch: Remove dead code in relocate_new_kernel
LoongArch: Use _UL() and _ULL()
LoongArch: Fix some build warnings with W=1
LoongArch: Fix lockdep static memory detection
The current links of ABI can not be found for some time, let us fix
the broken links.
By the way, the latest and official ABI documentation releases are
available at https://github.com/loongson/la-abi-specs, but there are
no Chinese and pdf versions for now, so just do the minimal changes
to update the links so that they can be found, hope there are stable
links in the future.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
Pull s390 updates from Heiko Carstens:
- Add vfio-ap support to pass-through crypto devices to secure
execution guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that the EFI entry code in assembler is only used by the optional
and deprecated EFI handover protocol, and given that the EFI stub C code
no longer returns to it, most of it can simply be dropped.
While at it, clarify the symbol naming, by merging efi_main() and
efi_stub_entry(), making the latter the shared entry point for all
different boot modes that enter via the EFI stub.
The efi32_stub_entry() and efi64_stub_entry() names are referenced
explicitly by the tooling that populates the setup header, so these must
be retained, but can be emitted as aliases of efi_stub_entry() where
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-5-ardb@kernel.org
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
Pull iommu updates from Joerg Roedel:
"Core changes:
- iova_magazine_alloc() optimization
- Make flush-queue an IOMMU driver capability
- Consolidate the error handling around device attachment
AMD IOMMU changes:
- AVIC Interrupt Remapping Improvements
- Some minor fixes and cleanups
Intel VT-d changes from Lu Baolu:
- Small and misc cleanups
ARM-SMMU changes from Will Deacon:
- Device-tree binding updates:
- Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
- Add two new Qualcomm SMMUs in SDX75 and SM6375
- Workarounds for Arm MMU-700 errata:
- 1076982: Avoid use of SEV-based cmdq wakeup
- 2812531: Terminate command batches with a CMD_SYNC
- Enforce single-stage translation to avoid nesting-related errata
- Set the correct level hint for range TLB invalidation on teardown
.. and some other minor fixes and cleanups (including Freescale PAMU
and virtio-iommu changes)"
* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
iommu/vt-d: Remove commented-out code
iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
iommu/vt-d: Handle the failure case of dmar_reenable_qi()
iommu/vt-d: Remove unnecessary (void*) conversions
iommu/amd: Remove extern from function prototypes
iommu/amd: Use BIT/BIT_ULL macro to define bit fields
iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
iommu/amd: Fix compile error for unused function
iommu/amd: Improving Interrupt Remapping Table Invalidation
iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
iommu/amd: Introduce Disable IRTE Caching Support
iommu/amd: Remove the unused struct amd_ir_data.ref
iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
iommu/arm-smmu-v3: Set TTL invalidation hint better
iommu/arm-smmu-v3: Document nesting-related errata
iommu/arm-smmu-v3: Add explicit feature for nesting
iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
dt-bindings: arm-smmu: Add SDX75 SMMU compatible
dt-bindings: arm-smmu: Add SM6375 GPU SMMU
...
Pull arm64 documentation move from Jonathan Corbet:
"Move the arm64 architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm64-move' of git://git.lwn.net/linux:
perf arm-spe: Fix a dangling Documentation/arm64 reference
mm: Fix a dangling Documentation/arm64 reference
arm64: Fix dangling references to Documentation/arm64
dt-bindings: fix dangling Documentation/arm64 reference
docs: arm64: Move arm64 documentation under Documentation/arch/
Pull arm documentation move from Jonathan Corbet:
"Move the Arm architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm-move' of git://git.lwn.net/linux:
dt-bindings: Update Documentation/arm references
docs: update some straggling Documentation/arm references
crypto: update some Arm documentation references
mips: update a reference to a moved Arm Document
arm64: Update Documentation/arm references
arm: update in-source documentation references
arm: docs: Move Arm documentation to Documentation/arch/
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/arm64 into arch/ (along with the Chinese equvalent
translations) and fix up documentation references.
Cc: Will Deacon <will@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <src.res@email.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Yantengsi <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving documentation fixes, plus one Spanish
translation that has been ready for some time but got applied late"
* tag 'docs-6.4-2' of git://git.lwn.net/linux:
docs/sp_SP: Add translation of process/adding-syscalls
CREDITS: Update email address for Mat Martineau
Documentation: update kernel stack for x86_64
docs: Remove unnecessary unicode character
docs: fix "Reviewd" typo
Documentation: timers: hrtimers: Make hybrid union historical
docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
doc:it_IT: fix some typos
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
Pull x86 fpu updates from Dave Hansen:
"There's no _actual_ kernel functionality here.
This expands the documentation around AMX support including some code
examples. The example code also exposed the fact that hardware
architecture constants as part of the ABI, but there's no easy place
that they get defined for apps. Adding them to a uabi header will
eventually make life easier for consumers of the ABI.
Summary:
- Improve AMX documentation along with example code
- Explicitly make some hardware constants part of the uabi"
* tag 'x86_fpu_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Explain the state component permission for guests
Documentation/x86: Add the AMX enabling example
x86/arch_prctl: Add AMX feature numbers as ABI constants
Documentation/x86: Explain the purpose for dynamic features
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/m68k into arch/ and fix all in-tree references.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/parisc into arch/ and fix all in-tree references.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/ia64 into arch/ and fix all in-tree references.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/arc into arch/ and fix all in-tree references.
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/nios2 into arch/ and fix all in-tree references.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/openrisc into arch/ and fix all in-tree references.
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Acked-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/sh into arch/ and fix all in-tree references.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/sparc into arch/ and fix all in-tree references.
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
