IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In order to properly system suspend, it is necessary to unload the firmware
and ensure the chip is ready for shutdown (if necessary). If the system
is currently in runtime suspend, it is necessary to wake up the device,
and then make it ready. Currently, the wake does not correctly resync
the device, which may mean it cannot suspend correctly. Fix this by
performaing a resync.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, we do not check the return status of the pause command,
immediately after we load firmware. If the pause has failed,
the firmware is not running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To enable the speaker output in external boost mode, 2 registers must
be set, one after another. The longer the time between the writes of
the two registers, the more likely, and more loudly a pop may occur.
To minimize this, an mbox command can be used to allow the firmware
to perform this action, minimizing any delay between write, thus
minimizing any pop or click as a result. The old method will remain
when running without firmware.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a driver for the Cirrus Logic CS35L56 amplifier. This uses the same
component binding API as the CS35L41 driver. This is not a standalone
HDA device; it provides control of the CS35L56 for systems that use a
combination of an HDA codec and CS35L56 amplifiers with audio routed
through the HDA codec.
The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.
Control interfaces are I2C or SPI through the standard Linux I2C or SPI
bus framework.
Most chip functionality is controlled by on-board ROM firmware that is
always running. Firmware patches can be applied by the driver in the form
of a .wmfw file (firmware patch) and/or a .bin file (system tuning).
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230721132120.5523-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add #includes of dependencies into hda_auto_parser.h and hda_generic.h
hda_auto_parser.h uses definitions in hda_local.h.
hda_generic.h uses definitions in hda_local.h and hda_auto_parser.h.
It also references struct hda_jack_callback, but only as a pointer.
This has been forward-declared so hda_jack.h only needs to be
included in source that actually uses it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230721132120.5523-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch order of Intel MTL and RPL codec entries to keep the codec device
id list nicely ordered. Also use the opportunity to fix the naming
to the convention used elsewhere in the drivers.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230721135722.31288-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding support for new Dell laptops using Cirrus Logic CS35L41
smart amplifiers with Realtek codec.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230720082022.13033-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Generic fixup for CS35L41 amplifies should not have vendor specific
chained fixup. For ThinkPad laptops with led issue, we can just add
specific fixup.
Fixes: a6ac60b36d (ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec)
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230720082022.13033-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few ALSA control API helpers like snd_ctl_rename(), snd_ctl_remove()
and snd_ctl_find_*() suppose the callers taking card->controls_rwsem.
But it's error-prone and fragile. This patch set tries to change
those API functions to take the card->controls>rwsem internally by
themselves, so that the drivers don't need to take care of lockings.
After applying this patch set, only a couple of places still touch
card->controls_rwsem (which are OK-ish as they need for traversing the
control linked list).
Link: https://lore.kernel.org/r/20230718141304.1032-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=V5+5
-----END PGP SIGNATURE-----
Merge tag 'tags/ctl-lock-fixes-6.6' into for-next
ALSA: Make control API taking controls_rwsem consistently
A few ALSA control API helpers like snd_ctl_rename(), snd_ctl_remove()
and snd_ctl_find_*() suppose the callers taking card->controls_rwsem.
But it's error-prone and fragile. This patch set tries to change
those API functions to take the card->controls>rwsem internally by
themselves, so that the drivers don't need to take care of lockings.
After applying this patch set, only a couple of places still touch
card->controls_rwsem (which are OK-ish as they need for traversing the
control linked list).
Link: https://lore.kernel.org/r/20230718141304.1032-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, snd_ctl_remove() requires its caller to take
card->controls_rwsem manually before the call for avoiding possible
races. However, many callers don't care and miss the locking.
Basically it's cumbersome and error-prone to enforce it to each
caller. Moreover, card->controls_rwsem is a field that should be used
only by internal or proper helpers, and it's not to be touched at
random external places.
This patch is an attempt to make those calls more consistent: now
snd_ctl_remove() takes the card->controls_rwsem internally, just like
other API functions for kctls. Since a few callers already take the
controls_rwsem locks, the patch removes those locks at the same time,
too.
Link: https://lore.kernel.org/r/20230718141304.1032-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Laptop 15s-eq2xxx uses ALC236 codec and controls the mute LED using
COEF 0x07 index 1. No existing quirk covers this configuration.
Adds a new quirk and enables it for the device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230718161241.393181-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it to simplify
declarations change to using PCI_DEVICE_DATA() macro for Intel IDs and
PCI_VDEVICE() for all other that have defined vendor.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175109.4066599-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec989130 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Reported-by: Joseph C. Sible <josephcsible@gmail.com>
Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/
Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G614J series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-5-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These models use NSIWAY amplifiers for internal speaker, but cannot put
sound outside from these amplifiers. So eapd verbs are needed to initialize
the amplifiers. They can be added during boot to get working sound out
of internal speaker.
Signed-off-by: dengxiang <dengxiang@nfschina.com>
Link: https://lore.kernel.org/r/20230703021751.2945750-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This applies a SND_PCI_QUIRK(...) to the Clevo NPx0SNx barebones fixing the
microphone not being detected on the headset combo port.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230628155434.584159-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZjIQACgkQJNaLcl1U
h9Dm0wf/X1q4n6KSXLvSyoSUxS/RWzWgyDDX7a4iLcFiov3ehHpVwzhwI/+1xSzs
SGhg6q2rud05SejFBh+2L7HMZfdXWSfW9ukaGz3UsCdqw3/7zAUFgY1RGtjZO4lA
eH50vEME9RbkIDgyxzYe9eViaKGh2fNxIbQ2d9hx6+nIVNfuuSikvGz4K/9PD0DN
2tBgzuIWwrPIbvMV2zHDCycmVG0lqScMWjIrdpDFxa63aPTr920YqYWSoQfOUR1s
j9zlZWnclTjrqRl1GZHxnM8N70vmutZWXAB1WFjal6mmMd6lUG71CyYHvA5h5D0V
ygNpn9B5REYlHBVzI43uT3nog+iS4Q==
=dbjW
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
On HP EliteBook 835/845/845W G10, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Fixes: 3e10f6ca76 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Link: https://lore.kernel.org/r/20230626130301.301712-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G634Z series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, the value of WALLCLK register
is always 0, which is meaningless, so we return directly.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/185df71ef413ab190460eb377703214ee7288aeb.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, after calling snd_hdac_stream_updateb()
to enable DMA engine, the SDnCTL.STRM will become to zero. We
need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/27aeddf5ebbe7c69631cec0e489c1b264be94990.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute
LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2
CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need
the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Fixes: 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230606145747.135966-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure Firmware Load control and Firmware Type control
returns 1 when the value changes.
Remove fw_mutex from firmware load control put, since it is
unnecessary, and prevents any possibility of mutex inversion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio core code replaces the kctl->id.index of SPDIF-related
controls after assigning via snd_ctl_add(). This doesn't work any
longer with the new Xarray lookup change. The change of the kctl->id
content has to be done via snd_ctl_rename_id() helper, instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230525203640.677826-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.
Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's yet another laptop that needs the fixup to enable mute and
micmute LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512083417.157127-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound. Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes: 563785edfc ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.
alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.
Pin configs are needed to enable headset mic detection.
Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for HP EliteBook 835/845/845W/865 G10 laptops
with CS35L41 amplifiers on I2C/SPI bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230510142227.32945-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are collections of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most
of it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused
a regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup,
and some documentation updates.
-----BEGIN PGP SIGNATURE-----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=jd8l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused a
regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
some documentation updates"
* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
ALSA: pcm: playback silence - move silence variable updates to separate function
ALSA: pcm: playback silence - remove extra code
ALSA: pcm: fix playback silence - correct incremental silencing
ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
ALSA: docs: Fix code block indentation in ALSA driver example
ALSA: docs: Extend module parameters description
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
ALSA: emu10k1: use more existing defines instead of open-coded numbers
ASoC: amd: yc: Add ASUS M3402RA into DMI table
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
...
There's another laptop that needs the fixup to enable mute and micmute
LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the mute LED on the HP Pavilion Aero Laptop
13-be0xxx. The current behavior is that the LED does not turn on at any
time and does not indicate to the user whether the sound is muted.
The solution is to add a PCI quirk to properly recognize and support the
LED on this device.
This change has been tested on the device in question using modified
versions of kernels 6.0.7-6.2.12 on Arch Linux.
Signed-off-by: Caleb Harper <calebharp2005@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230503175026.6796-1-calebharp2005@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop uses Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230501231346.54979-1-asselsm@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly standard release for SPI with the exception of a change to the
API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily for
a while. There's also a new API to allow us to TPM chips on half duplex
controllers.
There's three commits in here that were mangled by a bad interaction
between the alsa-devel mailing list software and b4, I didn't notice
until there were merges on top with it being SPI not ALSA. It seemed
clear enough to not be worth going back and fixing.
- Refactoring in preparation for supporting multiple chip selects for a
single device, needed by some flash devices, which required a change
in the SPI device API visible throughout the tree.
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI.
- Optimisation for large transfers on fsl-cpm devices.
- Cleanups around device property use which fix some sisues with
fwnode.
- Use of both void remove() and devm_platform_.*ioremap_resource().
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI.
The final commit converting to DEV_PM_OPS() was applied late to fix a
warning that was introduced by some of the earlier work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRIFQgACgkQJNaLcl1U
h9BJOwf+JF2RySdn5g1LsyTndPZhLfw4iJgTHaMlnv5tiPHvYVYMM/mNMbMr5Znh
Y2T0OUkzuRfOK273C+hItC1bTYFTa2cEbDb5dpmKBOZdQ3hjGsZQBvuH2bScUQ+a
H7UgD3FYOJST6k6rRgZQxVMPePFrXAOaO1gmFWTR3v1EcEr2JeQnjZsmymFXcTnc
CtPg9N3RvhVnq5aXuxSgQeyyKIjo4LJh/eZ2mexPIu0DeUq3MftaWwSwCXFIoeNC
DMLA4mZWTgf/yt6JUALwLr+bIiJjb4qGjp3xGZ2wmX7zn73f9QQvuunKb1V4zbNF
EdXLo2VjA9cZjsihenBaKeHnkfgNfA==
=IRqY
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGdEsACgkQJNaLcl1U
h9BNVAf+Ijupg3dhAl6847v1PRYXkYK6YjAayhNd0xRoRePKnnv1zkrsXSBzxZUM
8KHpQDUJyfQbPnE2JRmr1WfHSoNDl/NXdJl+lefPBgol5bzxRji68hDPGjA0645o
R6vzrqLNw8mh3jwptXfEpQfKH8tIvwOeMeLkncDvsm0ZCUR2GhYnjB1g82ih0ssx
lvh36PdCRF0e/ruHxkiVn9b/riID65oTRkN6IxJqoPnqJZVyCiqmiJcfWePpaPir
4R9Dyk+REos/aCLdne1g6H21Tgi0td+blv6empqwdEXG41VSdRMTrOZb1ZISKmpF
ggPbKsk9BjJFBCewllHXJ0YEcBp9/g==
=TVxt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.4
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
There is a HP ProBook 455 G10 which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, the tester gave a weak feedback (working/non-working) for
this case. After the double confirmation, this change is not really required.
The standard code with alc269_fallback_pin_fixup_tbl should work on this
hardware.
Fixes: 5911d78fab ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Fixes: 5f4efc9dfc ("ALSA: hda/realtek: Fix support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These Lenovo laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230412160531.182007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a DRM driver turns on or off the screen with the audio
capability, it notifies the ELD to HD-audio HDMI codec driver via
component ops. HDMI codec driver, in turn, attaches or detaches the
PCM stream for the given port on the fly.
The problem is that, since the recent code change, the HDMI driver
always treats the PCM stream assignment dynamically; this ended up the
confusion of the PCM device appearance. e.g. when a screen goes once
off and on again, it may appear on a different PCM device before the
screen-off. Although the application should treat such a change, it
doesn't seem working gracefully with the current pipewire (maybe
PulseAudio, too).
As a workaround, this patch changes the HDMI codec driver behavior
slightly to be more consistent. Now it remembers the previous PCM
slot for the given port and try to assign to it. That is, if a port
is re-enabled, the driver tries to use the same PCM slot that was
assigned to that port previously. If it conflicts, a new slot is
searched and used like before, instead.
Note that multiple monitor connections are the only typical case where
the PCM slot preservation is effective. As long as only a single
monitor is connected, the behavior isn't changed, and the first PCM
slot is still assigned always.
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259
Link: https://lore.kernel.org/r/20230331142217.19791-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230331083242.58416-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, in commit 5911d78fab a wrong codec patch was selected.
The model=alc283-dac-wcaps is equivalent to ALC283_FIXUP_CHROME_BOOK not
ALC295_FIXUP_CHROME_BOOK.
Fixes: 5911d78fab ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230322153404.386473-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit f83bb25924 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID. And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.
Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.
In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.
Fixes: f83bb25924 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model")
Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi>
Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).
static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;
snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...); ^
return 1;
}
We will get below error by cppcheck
sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
for (i = 0; i < TUNING_CTLS_COUNT; i++)
^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
^
This patch cares non match case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20230310173217.3429788-9-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 535115b5ff ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307135317.37621-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shared boost allows two amplifiers to share a single boost circuit by
communicating on the MDSYNC bus.
The passive amplifier does not control the boost and receives data from
the active amplifier.
Shared Boost is not supported in HDA Systems.
Based on David Rhodes shared boost patches.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-4-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The headset jack works better with model=alc283-dac-wcaps. Without this
option, the headset insertion (separate physical jack) may not be handled
correctly (re-insertion is required).
It seems that it follows the "Intel Reference Board" defaults.
Reported-by: steven_wu2@dell.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230221102157.515852-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for
AMD") caused only AMD gpu's with PX to have their audio component register
with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the
gpu switcher no longer had the audio client registering, so when the gpu is
powered off by vga_switcheroo snd_hda_intel is unaware that it should have
suspended the device:
amdgpu: switched off
snd_hda_intel 0000:03:00.1:
Unable to change power state from D3hot to D0, device inaccessible
snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
To resolve this, we use apple_gmux_detect() and register a
vga_switcheroo audio client when apple-gmux is detected.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/all/20230210044826.9834-9-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230216103450.12925-1-orlandoch.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make its audio LEDs and speaker work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214140432.39654-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure firmware for cs35l41 is correctly running, it is necessary
that a corresponding tuning file is also loaded. Without both,
the firmware may not be performing correctly
Ensure that if we load the firmware, we have also loaded the correct
tuning file. Otherwise, fall back to default firmware and tuning.
If default tuning is also missing, then disable DSP firmware.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Function cs_dsp_coeff_write_ctrl() can return 3 possible values:
0 - no change, 1 - value has changed and -1 - error, so positive value
is not an error.
Fixes: 7406bdbc4f ("ASoC: wm_adsp: Return whether changed when writing controls")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214035853.31217-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GPIO2 PIN use for output. Mask Dir and Data need to assign for 0x4. Not 0x3.
This fixed was for Lenovo Desktop(0x17aa1056). GPIO2 use for AMP enable.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8d02bb9ac8134f878cd08607fdf088fd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f2bd1c5ae2 ("ALSA: hda: Fix page fault in
snd_hda_codec_shutdown()") relocated initialization of several codec
device fields. Due to differences between codec_exec_verb() and
snd_hdac_bus_exec_bus() in how they handle VERB execution - the latter
does not touch PM - assigning ->exec_verb to codec_exec_verb() causes PM
to be engaged before it is configured for the device. Configuration of
PM for the ASoC HDAudio sound card is done with snd_hda_set_power_save()
during skl_hda_audio_probe() whereas the assignment happens early, in
snd_hda_codec_device_init().
Revert to previous behavior to avoid problems caused by too early PM
manipulation.
Suggested-by: Jason Montleon <jmontleo@redhat.com>
Link: https://lore.kernel.org/regressions/CALFERdzKUodLsm6=Ub3g2+PxpNpPtPq3bGBLbff=eZr9_S=YVA@mail.gmail.com
Fixes: f2bd1c5ae2 ("ALSA: hda: Fix page fault in snd_hda_codec_shutdown()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230210165541.3543604-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This 2nd variables are all set as true in treewide. So I think
it can be removed for easy understanding.
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230209121723.14328-1-zhangyiqun@phytium.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207083011.100189-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230206150019.3825120-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.
Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.
[ rearranged the entry in SSID order -- tiwai ]
Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.
The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.
This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.
This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.
BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d1740315 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab6 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.
Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several functions that take part in codec's initialization and removal
are re-used by ASoC codec drivers implementations. Drivers mimic the
behavior of hda_codec_driver_probe/remove() found in
sound/pci/hda/hda_bind.c with their component->probe/remove() instead.
One of the reasons for that is the expectation of
snd_hda_codec_device_new() to receive a valid pointer to an instance of
struct snd_card. This expectation can be met only once sound card
components probing commences.
As ASoC sound card may be unbound without codec device being actually
removed from the system, unsetting ->preset in
snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
scenario causing null-ptr-deref. Preset is assigned only once, during
device/driver matching whereas ASoC codec driver's module reloading may
occur several times throughout the lifetime of an audio stack.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230119143235.1159814-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_get_connections() can return a negative error code.
It may lead to accessing 'conn' array at a negative index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 30b4503378 ("ALSA: hda - Expose secret DAC-AA connection of some VIA codecs")
Link: https://lore.kernel.org/r/20230119082259.3634-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230118115446.14902-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 01ef7dbffb ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230110202514.2792-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The runtime PM core checks with runtime_idle callback whether it can
goes to the runtime suspend or not, and we can put the boost type
check there instead of runtime_suspend and _resume calls. This will
reduce the unnecessary runtime_suspend() calls.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105093531.16960-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit to support the system suspend for CS35L41 caused a
regression on the models with CS35L41_EXT_BOOST_NO_VSPK_SWITC boost
type, as the suspend/resume callbacks just return -EINVAL. This is
eventually handled as a fatal error and blocks the whole system
suspend/resume.
For avoiding the problem, this patch corrects the return code from
cs35l41_system_suspend() and _resume() to 0, and replace dev_err()
with dev_err_once() for stop spamming too much.
Fixes: 88672826e2 ("ALSA: hda: cs35l41: Support System Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/e6751ac2-34f3-d13f-13db-8174fade8308@pm.me
Link: https://lore.kernel.org/r/20230105093531.16960-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform uses ALC236 codec which using GPIO2 to control
mute LED and GPIO1 to control micmute LED.
Thus, add a quirk to make them work.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105044154.8242-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the new style KAE keep-alive implementation is used on compatible
Intel hardware, the clocks are maintained when codec is in D3. The
generic code in hda_cleanup_all_streams() can however interfere with
generation of audio samples in this mode, by setting the stream and
channel ids to zero.
To get full benefit of the keepalive, set the new
no_stream_clean_at_suspend quirk bit on affected Intel hardware. When
this bit is set, stream cleanup is skipped in hda_call_codec_suspend().
Special handling is needed for the case when system goes to suspend. The
stream id programming can be lost in this case. This will also cause
codec->cvt_setups to be out of sync. Handle this by implementing custom
suspend/resume handlers. If keep-alive is active for any converter, set
the quirk flags no_stream_clean_at_suspend and forced_resume. Upon
resume, keepalive programming is restored if needed.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the stream-id is zero, the keep-alive (KAE) will only ensure clock is
generated, but no audio samples are sent over display link. This happens
before first real audio stream is played out to a newly connected
receiver.
Reuse the code in silent_stream_enable() to set up stream parameters
to sane defaults values, also when using the newer keep-alive flow.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The i915 display codec may not successfully transition to
normal audio streaming mode, if the stream id is programmed
while codec is actively transmitting data. This can happen
when silent stream is enabled in KAE mode.
Fix the issue by implementing a i915 specific programming
flow, where the silent streaming is temporarily stopped,
a small delay is applied to ensure display codec becomes
idle, and then proceed with reprogramming the stream ID.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7353
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221128022849.13759-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move all the exports into a namespace.
This also adds the MODULE_IMPORT_NS to the 3 drivers that use the
exported functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108084746.583058-1-evan.quan@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
