IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch changes device name to more user friendly name of
Analog and SPDIF sound nodes for rk3399-rockpro64.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20210110151913.3615326-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
ethernet-phy: 'reg' is a required property
The pinctrl nodename "ethernet-phy" conflicts with the rules
in the "ethernet-phy.yaml" document, so rename it to "gmac2io".
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/ethernet-phy.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210110194851.10207-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs are
not practical. Use newly introduced aliases for mmcblk devices from [1].
The sort order is based on reg address.
[1] https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118155242.7172-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The cpu_thermal node in the rk3399-rock960.dts file does not
reference &cpu_thermal directly to add the board-specific parts,
but also repeats all the SoC default properties.
Clean the whole thing up and fix alignment.
Place new nodes in the correct alphabetical order.
Compered to rk3399.dtsi the temperature property in
cpu_alert0 changes from <70000> to <65000>.
A sustainable-power property was added.
The trip property in cooling map0 points to <&cpu_alert1>
instead of <&cpu_alert0>.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210118180054.9360-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful
purpose, and certainly bear no relation at all to the actual underlying
interconnect topology. They appear to be cargo-cult copying from a
design misstep in the very early days of FDT adoption on ARM, which was
righted with the "arm,primecell" compatible, and the last trace of the
idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop
"arm,amba-bus" in favor of "simple-bus"").
As such, they can simply be removed and the DMA-330 nodes fitted into
the normal sort order.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/131e0ea065109760ea3b59c4bb90cf4fac7826f7.1611186142.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set NanoPi R2S's "sys" LED to be on by default. This matches the
behaviour of the stock FriendlyWRT image, and makes it much easier
to tell when the thing has finished booting.
Suitable triggers for the two network LEDs cannot realistically be
configured from DT, so leave them be.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f066be60aa99460a45d04113c5e507d6602186f1.1611187213.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pcie@f8000000:
ranges: 'oneOf' conditional failed, one must be fixed:
The pcie ranges property is an array. The dt-check expects that
each array item is wrapped with angle brackets, so fix that ranges
property format for the rk3399 pcie node.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/pci/pci-bus.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210122171243.16138-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the schematic there is an external pull up, so there is no
need to enable the internal one additionally. Using no pull up matches
the vendor device tree.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210124210328.611707-2-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
NanoPi R2S is headless, so rightly does not enable any of the display
interface hardware, which currently provokes an obnoxious error in the
boot log from the fake DRM device failing to find anything to bind to.
It probably isn't *too* hard to obviate the fake device shenanigans
entirely with a bit of driver reshuffling, but for now let's just
disable it here to shut up the spurious error.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c4553dfad1ad6792c4f22454c135ff55de77e2d6.1611186099.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NanoPi M4B is a minor revision of the original M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
Add a new dts file for the new board revision that shows the difference
against the original.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210121162321.4538-5-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Only the NanoPC T4 hs the PCIe reset pin routed to the SoC. For the
NanoPi M4 family, no such signal is routed to the expansion header on
the base board.
As the schematics for the expansion board were not released, it is
unclear how this is handled, but the likely answer is that the signal
is always pulled high.
Move the ep-gpios property from the common nanopi4.dtsi file to the
board level nanopc-t4.dts file. This makes the nanopi-m4 lack ep-gpios,
matching the board design.
A companion patch "PCI: rockchip: make ep_gpio optional" for the Linux
driver is required, as the driver currently requires the property to be
present.
Fixes: e7a095908227 ("arm64: dts: rockchip: Add devicetree for NanoPC-T4")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210121162321.4538-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: video-codec@ff660000:
'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
The rkvdec driver gets it irq with help of the platform_get_irq()
function, so remove the interrupt-names property from the rk3399
vdec node.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
media/rockchip,vdec.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117181653.24886-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa ROCK Pi E is a router oriented SBC based on Rockchip's RK3328 SoC.
As the official wiki page puts it, "E for Ethernets".
It features the RK3328 SoC, gigabit and fast Ethernet RJ45 ports, both
directly served by Ethernet controllers in the SoC, a USB 3.0 host port,
a power-only USB type-C port, a 3.5mm headphone jack for audio output,
two LEDs, a 40-pin Raspberry Pi style GPIO header, and optional WiFi+BT
and PoE header.
The board comes in multiple configurations, differing in the amount of
onboard RAM, the level of WiFi+BT (none, 802.11n 2.4GHz, or 802.11ac
2.4 GHz & 5 GHz), and whether PoE is supported or not. These variants
can all share the same device tree.
The USB 2.0 OTG controller is available on the 40-pin header. This is
not enabled in the device tree, since it is possible to use it in a
host-only configuration, or in OTG mode with an extra pin from the
header as the ID pin.
The device tree is based on the one of the Rock64, with various parts
modified to match the ROCK Pi E, and some parts updated to newer styles,
such as the gmac2io node's mdio sub-node.
Add a new device tree file for the new board.
The voltages for the adc-keys were selected to have some tolerances for
resistor variances and the ADC itself also causing voltage drops. Since
the recover button is the only button on the adc line, this should not
cause any issues.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The gmac2phy is integrated with the PHY within the SoC. Any properties
related to this integration can be included in the .dtsi file, instead
of having board dts files specify them separately.
Add the clock_in_out property to specify the direction of the PHY clock.
This is the minimum required to have gmac2phy working on Linux. Other
examples include assigned-clocks, assigned-clock-rates, and
assigned-clock-parents properties, but the hardware default plus the
implementation requesting the appropriate clock rate also works.
Fixes: 9c4cc910fe28 ("ARM64: dts: rockchip: Add gmac2phy node support for rk3328")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210117100710.4857-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml:
thermal-zones: 'cpu', 'gpu' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
Rename Rockchip rk3399 thermal subnodes so that it ends
with "-thermal"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
thermal/thermal-zones.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117150953.16475-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dt.yaml:
thermal-zones: 'cpu', 'gpu' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
Make the rk3368 thermal subnode names in line with the rest of
the Rockchip dts files. Add a label and rename them so that it ends
with "-thermal"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
thermal/thermal-zones.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117150953.16475-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It recently became apparent that the lack of a 'device_type = "pci"'
in the PCIe root complex node for rk3399 is a violation of the PCI
binding, as documented in IEEE Std 1275-1994. Changes to the kernel's
parsing of the DT made such violation fatal, as drivers cannot
probe the controller anymore.
Add the missing property makes the PCIe node compliant. While we
are at it, drop the pointless linux,pci-domain property, which only
makes sense when there are multiple host bridges.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200815125112.462652-3-maz@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds 'disabled' SPDIF sound node and related settings
for rk3399-rockpro64.
There are 2 reasons:
- All RK3399 dma-bus channels have been already used by I2S0/1/2
- RockPro64 does not have SPDIF optical nor coaxial connector,
just have 3pins
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20200810091619.3170534-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch enables HDMI sound (I2S0) and Analog sound (I2S1) which
are defined in rk3328.dtsi, and replace SPDIF nodes.
We can use SPDIF pass-through with suitable ALSA settings and on
mpv or other media players.
- Settings: https://github.com/LibreELEC/LibreELEC.tv/blob/master/projects/Rockchip/filesystem/usr/share/alsa/cards/SPDIF.conf
- Ex.: mpv foo.ac3 --audio-spdif=ac3 --audio-device='alsa/SPDIF.pcm.iec958.0:SPDIF'
[Why use simple-audio-card for SPDIF?]
For newly adding nodes, ASoC guys recommend to use audio-graph-card.
But all other sound nodes for rk3328 have already been defined by
simple-audio-card. In this time, I chose for consistent sound nodes.
[DMA allocation problem]
After this patch is applied, UART2 will fail to allocate DMA resources
but UART driver can work fine without DMA.
This error is related to the DMAC of rk3328 (pl330 or compatible).
DMAC connected to 16 DMA sources. Each sources have ID number that is
called 'Req number' in rk3328 TRM. After this patch is applied total 7
of DMA sources will be activated as follows:
| Req number | Source | Required |
| | | channels |
|------------+--------+-----------|
| 8, 9 | SPI0 | 2ch |
| 11, 12 | I2S0 | 2ch |
| 14, 15 | I2S1 | 2ch |
| 10 | SPDIF | 1ch |
|------------+--------+-----------|
| | Total | 7ch |
|------------+--------+-----------|
| 6, 7 | UART2 | 2ch | -> cannot get DMA channels
Due to rk3328 DMAC specification we can use max 8 channels at same
time. If SPI0/I2S0/I2S1/SPDIF will be activated by this patch,
required DMAC channels reach to 7. So the last two channels (for
UART2) cannot get DMA resources.
Virt-dma mechanism for pl0330 DMAC driver is needed to fix this
problem.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20200802154231.2639186-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On Pinebook Pro laptops with an NVMe SSD installed, prevent random
crashes in the NVMe driver by not attempting to use a PCIe link speed
higher than that supported by the RK3399 SoC.
See commit 712fa1777207 ("arm64: dts: rockchip: add max-link-speed for
rk3399").
Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Simon South <simon@simonsouth.net>
Link: https://lore.kernel.org/r/20200930185627.5918-1-simon@simonsouth.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the conversion of syscon.yaml minItems for compatibles
was set to 2. Current Rockchip dtsi files only use "syscon" for
QoS registers. Add Rockchip QoS compatibles for px30
to reduce notifications produced with:
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201206103711.7465-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the conversion of syscon.yaml minItems for compatibles
was set to 2. Current Rockchip dtsi files only use "syscon" for
QoS registers. Add Rockchip QoS compatibles for rk3399
to reduce notifications produced with:
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201206103711.7465-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vop-mmu shares the irq with its matched vop but not the vpu.
Fixes: 7053e06b1422 ("arm64: dts: rockchip: add core dtsi file for PX30 SoCs")
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20210108110627.3231226-1-heiko@sntech.de
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/ak/EACgkQmmx57+YA
GNmQwRAAtw5Z0qYI3vewX2CPUaHUWEeN50gRa63tR+AALqR5e+M+IbAttgOwlLDB
jmsiLRYXgYeS+nTCqxWX3O/KtDH+Ua3GfPoXch5Wt4k7jGV8XtHsWqltl9qxGmO7
pQSoafJa55S7iXX7j4PMWc2el07zjYAejyzVHz7sD+9ARPaG0cL8IuAWLqAirTSt
b9FhK2g7e/uUx2Jp5Cx/Ck4kZe27bTlpbhhcJMdypsw6ouue0wfq9gs68dQ6dAq5
/KyX8PNsjX/WCcgm6YhgOwqmEk73pc17dym2SVxi+jL/HFIyQyViOpFuPc20cCWv
9QirMsBw2Rw0yLHsIuHeeRl1KEn47vdfgP5A6e+BggpPjmtF0/S0kHR8yXWFyHfy
OUdS8W5OM3rlEUgGESaszh7P2kril8tMdw0212rAyTpyLPVRoKR7NtOo79WBclKq
L/2RPJNIQSotQuezhMpjH5zKgx6yOfATBZAEX0MiSU+jAEw/0Od5QCdhwu70bIAF
jHfjtqMGS50P/i1Ht0DpwOF9DvClAlKHvUKs3a7hK81MP2sOAaElpAP3iHwVPzsI
JU6Vn3AxnIfAsHdGh/FYwq7nxL9aVLCULUOeuLhwTbdAedXLkfFQDMIe1i8zgDtH
MpIrE4Un7kmkOxRG96v8f0IYu54OdQdudonravimpYD3uqRfxUQ=
=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
to the rk3288-based VMARC boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl/NHWkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVlcB/wIdj41vGWslMZcShijb+QeW5W6bYus3WkX
Zvl+RDGccGbjDH6UEKP+XETXR2tgKfXSooiO8YKjEV9L/fnfMZQWQh3rPg8SA39b
f2N7JTnB7YCasZU4XXeQtqB6TKRubAZixUxEWibY1l1mwb+izPeij73PptjEMgsm
jkVOjwX4lWhfISbVf2Nl5d6KWfbJgPgqu0yA7kIDlRDOvmsxh8vQyByHaTltoa/+
slLEGn0B+7kMEdGSdL6TgGQ1jwF1WPGoBokl7CnTsNzBkzQIm2wVnbvzZNY/5oI4
2HCR8ihpqjDxy84Dx3mmlVCl6uGCG8ipHSpLubg3rvqRhA2w1fes
=oBVw
-----END PGP SIGNATURE-----
Merge tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Veyron backlight fix, another fix for dtbs-check and some additions
to the rk3288-based VMARC boards.
* tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add SDIO0 node for VMARC SOM
ARM: dts: rockchip: Add rtc node for VMARC SOM
ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108
ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron
Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on the board schematics at
https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
on page 19 there is an USB Type-A receptacle being used as an USB-OTG port.
But the Type-A connector is not valid for OTG operation, for this reason
there is a switch to select host or device role.
This is non-compliant and error prone because switching is manual.
So, use host mode as it corresponds for a Type-A receptacle.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Link: https://lore.kernel.org/r/20201201154132.1286-4-vicencb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Based on the board schematics at
https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
on page 18:
vcc_lan is not controllable by software, it is just an analog LC filter.
Because of this, it can not be turned off-in-suspend.
and on page 17:
vcc_cam and vcc_mipi are not voltage regulators, they are just switches.
So, the voltage range is not applicable.
This silences an error message about not being able to adjust the voltage.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Link: https://lore.kernel.org/r/20201201154132.1286-2-vicencb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For UARTs, the local pull-ups should be on the RX pin, not the TX pin.
UARTs transmit active-low, so a disconnected RX pin should be pulled
high instead of left floating to prevent noise being interpreted as
transmissions.
This gets rid of bogus sysrq events when the UART console is not
connected.
Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201204064805.6480-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable ISP and camera sensor ov2685 and ov5695 for Scarlet Chromebook
Verified with:
make ARCH=arm64 dtbs_check
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20201020193850.1460644-10-helen.koike@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3399 has two ISPs, but only isp0 was tested.
Add isp0 node in rk3399 dtsi
Verified with:
make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20201020193850.1460644-9-helen.koike@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for
connecting WiFi/BT devices as a pluggable card via M.2 E-Key.
Add associated sdio0 nodes, properties.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[moved the unrelated rtc addition to a separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the UART bus.
UART bus on the design routed via USB to UART CP20x bridge. This
bridge powered from 3V3 regualtor gpio.
This patch adds BT enablement nodes for these respective boards.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-7-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the SDIO bus.
The SDIO power sequnce is connacted with exteernal 32KHz oscillator
and it require 3V3 regulator input.
This patch adds WiFi enablement nodes for these respective boards.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-6-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam EDIMM2.2 and C.Touch 2.0 Kits support USB Host
and OTG ports.
Add support to enable USB on these kits while mounting
px30-core SOM.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201109181017.206834-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml:
sdhci@fe330000: $nodename:0: 'sdhci@fe330000'
does not match '^mmc(@.*)?$'
Fix it by renaming sdhci to mmc.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
mmc/arasan,sdhci.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201116132311.8318-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now that driver support for the RK3328's audio codec, and the plumbing
is defined at the SoC level, we can enable analog audio at the board
level.
Enable analog audio by enabling the codec and the I2S interface
connected and the simple-audio-card that binds them together.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-4-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3328-ROC-CC already has HDMI display output enabled. Now that
audio for the HDMI controller is supported, it can be enabled as well.
Enable the simple-audio-card, and the I2S interface the audio is fed
from.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The board has a standard USB A female port connected to the USB OTG
controller's data pins. Set dr_mode in the OTG controller node to
indicate this usage, instead of having the implementation guess.
Fixes: 2171f4fdac06 ("arm64: dts: rockchip: add roc-rk3328-cc board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20201126073336.30794-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200929083217.25406-8-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose
carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
SOM's like PX30.Core needs to mount on top of this Carrier board
for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200929083217.25406-7-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
