IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As wsa881x schema mentions #sound-dai-cells as required property,
so update soundwire-controller.yaml example so that dt_bindings_check
does not fail as below:
Documentation/devicetree/bindings/soundwire/soundwire-controller.example.dt.yaml:
speaker@0,1: '#sound-dai-cells' is a required property
Documentation/devicetree/bindings/soundwire/soundwire-controller.example.dt.yaml:
speaker@0,2: '#sound-dai-cells' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114094806.15846-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
add interrupts and interrupt-names as optional properties
to support host-wakeup by interrupt properties instead of
host-wakeup-gpios.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit adds "super-speed-plus" to valid argument list of
"maximum-speed" property.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x and j721e.
This patch introduces RINGACC device tree bindings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
On Arm systems, some platform devices behind an SMMU may support the PASID
feature, which offers multiple address space. Let the firmware tell us
when a device supports PASID.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
This adds support for MediaTek musb controller in
host, peripheral and otg mode.
Signed-off-by: Min Guo <min.guo@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200115132547.364-20-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Add bq25892, bq25895 and bq25896 to list of supported device IDs in the
bq25890 DT binding document.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch adds an optional SLIMBus Interface device phandle property
that could be used by some of the SLIMBus devices.
Interface device is mostly used with devices that are dealing
with streaming.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200109103148.5612-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch set the correct value for oversampling maxItems. In the
original example, appears 3 items for oversampling while the maxItems
is set to 1, this patch fixes those issues.
Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible string "fsl,imx8qm-asrc" for imx8qm platform,
"fsl,imx8qxp-asrc" for imx8qxp platform.
There are two asrc modules in imx8qm & imx8qxp, the clock mapping is
different for each other, so add new property "fsl,asrc-clk-map"
to distinguish them.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/b9352edb014c1ee8530c0fd8829c2b044b3da649.1575452454.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert ingenic,jz4740-codec.txt and ingenic,jz4725b-codec.txt to one
single ingenic,codec.yaml file, since they share the same binding.
Add the ingenic,jz4770-codec compatible string in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191224002708.1207884-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
As the at25 uses the NVMEM subsystem, and the property is now being
handled, adding reference for it in the device tree binding document,
which allows to specify the GPIO line to which the write-protect pin
is connected.
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This reverts commit f5fa59a61eca "regulator: bindings: add
document bindings for mpq7920" as Rob has a number of problems
with the use of DT schema.
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds bindings for Qualcomm soundwire controller.
Qualcomm SoundWire Master controller is present in most Qualcomm SoCs
either integrated as part of WCD audio codecs via slimbus or
as part of SOC I/O.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200113132153.27239-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Allwinner A80 SoCs have a USB PHY controller that is used by Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This is an optional GPIO, if specified will be used to
swap lane 0 and lane 1 based on GPIO status. This is required
to achieve plug flip support for USB Type-C.
Type-C companions typically need some time after the cable is
plugged before and before they reflect the correct status of
Type-C plug orientation on the DIR line.
Type-C Spec specifies CC attachment debounce time (tCCDebounce)
of 100 ms (min) to 200 ms (max).
Allow the DT node to specify the time (in ms) that we need
to wait before sampling the DIR line.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a YAML schema to use the host controller driver with the
eMMC PHY on Intel's Lightning Mountain SoC.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a
PHY but a wrapper used to configure some of the input signals to the
SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G)
SERDES]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
This uses the new pata-common.yaml schema to
convert the Faraday FTIDE010 to DT schema.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
I need to create subnodes for drives connected to PATA
host controllers, and this needs to be supported generally,
so create a common YAML binding for "ide" that will support
subnodes with ports.
This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
I need to create subnodes for drives connected to SATA
host controllers, and this needs to be supported
generally, so create a common YAML binding for
"sata" that will support subnodes with ports.
This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[robh: fixup sata-port unit-address pattern]
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes some problems that caused build errors in the
lgm-io schema file:
- No "bindings" infix in the schema id
- Move the allOf inclusion for pinconf and pinmux nodes into
the patternProperties for the -pins node
- We want "groups" not "group" to be compulsory for a pinmux
node blended with a pin config node.
- Fix the generic pinmux-schema to list "groups" rather than
"group" for a pinmux node, this might have led to some confusion.
This is a first user of the generic schema so a bit of a bumpy
road.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The firmware-name property in the zap node can be used to specify a
device specific zap firmware.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
gpio controller to control 5 gpios on the chip. This patch adds
required device tree bindings for it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200107130844.20763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the compatible enum entries for Gateworks Ventana boards.
Signed-off-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the clock binding doc for i.MX8MP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes, a documentation fix, and a removal of a spec
violation for the bus recovery algorithm in the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix bus recovery stop mode timing
i2c: bcm2835: Store pointer to bus clock
dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
i2c: at91: fix clk_offset for sam9x60
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615e2 ("reset: Do not register resource data for missing
resets").
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXhg87xcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwKgqAQDLy40/GkWMZe6pv3Q6P5i8FyQZ
pSMcIKLP9Ig1bLdeRQD/YDjBbFVt9UbD7yLNJTkoNn3jJeg0bQo520yQ14NBHgM=
=LMjX
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.6
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615e2 ("reset: Do not register resource data for missing
resets").
* tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux:
reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristate
reset: Add Broadcom STB RESCAL reset controller
dt-bindings: reset: Document BCM7216 RESCAL reset controller
reset: intel: Add system reset controller driver
dt-bindings: reset: Add YAML schemas for the Intel Reset controller
reset: uniphier: Add SCSSI reset control for each channel
reset: Align logic and flow in managed helpers
reset: npcm: add NPCM reset controller driver
dt-bindings: reset: Add binding constants for NPCM7xx reset controller
dt-bindings: reset: add NPCM reset controller documentation
Link: https://lore.kernel.org/r/dbbb2ca7490a0146d9ba632fd4d9f38063e03e9f.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
