IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For optimal power consumption of USB4 routers the XHCI PCIe endpoint
used for tunneling must be in D3. Historically this is accomplished
by a long list of PCIe IDs that correspond to these endpoints because
the xhci_hcd driver will not default to allowing runtime PM for all
devices.
As both AMD and Intel have released new products with new XHCI controllers
this list continues to grow. In reviewing the XHCI specification v1.2 on
page 607 there is already a requirement that the PCI power management
states D3hot and D3cold must be supported.
In the quirk list, use this to indicate that runtime PM should be allowed
on XHCI controllers. The following controllers are known to be xHC 1.2 and
dropped explicitly:
* AMD Yellow Carp
* Intel Alder Lake
* Intel Meteor Lake
* Intel Raptor Lake
[keep PCI ID for Alder Lake PCH for recently added quirk -Mathias]
Cc: stable@vger.kernel.org
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.
This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.
A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.
Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This appears to fix the error:
"xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of
current TD ep_index 2 comp_code 13" that appear spuriously (or pretty
often) when using a r8152 USB3 ethernet adapter with integrated hub.
ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0
Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3
Cc: stable@vger.kernel.org
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
drivers/misc/sgi-gru/grumain.c:711 gru_check_chiplet_assignment() warn: 'gts->ts_user_chiplet_id' is unsigned
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20221025025223.573543-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Typical driver fixes for races and bugs. This also includes a sparse
warning fix for the recently introduced counter_array API: the macro
DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure
definition rather than multiple data structure definitions.
- 104-quad-8
* Fix race getting function mode and direction
- microchip-tcb-capture
* Handle Signal1 read and Synapse
- ti-ecap-capture
* fix IS_ERR() vs NULL check
- counter
* Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCY1a/wQAKCRC1SFbKvhIj
K+BZAP0TKVuXLDU4gBWcLGW+37LBNYn7AdufpkIshrE/6vgj4gEAnc1pMW26miW5
HyWKxNTdcbXz2p/DHXpr6Ef1fh7yBwM=
=bTl5
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
"First set of Counter fixes for 6.1 cycle
Typical driver fixes for races and bugs. This also includes a sparse
warning fix for the recently introduced counter_array API: the macro
DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure
definition rather than multiple data structure definitions.
- 104-quad-8
* Fix race getting function mode and direction
- microchip-tcb-capture
* Handle Signal1 read and Synapse
- ti-ecap-capture
* fix IS_ERR() vs NULL check
- counter
* Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array"
* tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To ensure that child node is found, don't rely on child's node name
which can take different value, but on child's compatible name.
Fixes: f5c5936d6b4d ("usb: dwc3: st: Fix node's child name")
Cc: stable <stable@kernel.org>
Cc: Jerome Audu <jerome.audu@st.com>
Reported-by: Felipe Balbi <felipe@balbi.sh>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The overhead of preparing sg data is high for transfers with limited
payload. When transferring isoc over high-speed usb the maximum payload
is rather small which is a good argument no to use sg. This patch is
changing the uvc_video_encode_isoc_sg encode function only to be used
for super speed gadgets.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20221017221141.3134818-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sleepgraph:
- add -wifitrace argument for tracing all the way to wifi reconnect
- include more data in ftrace to mark the end of kernel resume
- add async_synchronize_full to the list of funcs to chart
- add thermal zone info to the log data
- include a check for s0ix support (s2idle is the default mem_sleep)
- if s2idle does not support s0ix, remove the SYS%LPI turbostat var
- fix -dev crash when kprobe caller is just an address (not a symbol)
- fix the cpuexec data in -proc to display in resume
sleepgraph.8:
- add -wifitrace documentation
README:
- change links from 01.org to developer.intel.com
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The example on how to use and test Capture Overlay specified
the wrong video device node. Back in 2015 the loop_video control
moved from the output device to the capture device, but this
example code is still referring to the output video device.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If node_types does not have video/vbi/meta inputs or outputs,
then set num_inputs/num_outputs to 0 instead of 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
>From what I can see, this is not needed. And since using it issues a 'deprecated'
warning, just drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vivid_update_format_cap() can be called from an s_ctrl callback.
In that case (keep_controls == true) no control framework functions
can be called that take the control handler mutex.
The new call to v4l2_ctrl_modify_dimensions() did exactly that.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 6bc7643d1b9c (media: vivid: add pixel_array test control)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Whenever the compose width/height values change, the dev->bitmap_cap
vmalloc'ed array must be freed and dev->bitmap_cap set to NULL.
This was done in some places, but not all. This is only an issue if
overlay support is enabled and the bitmap clipping is used.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root
can use it. But at least check if the framebuffer parameters match that
of one of the framebuffer created by vivid, and reject anything else.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
NVMe spec requires all transports support dword aligned addresses, which
is already set in the namespace request_queue. Set the same limit in the
multipath device's request_queue as well.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When destroying a queue, when calling sock_release, the network stack
might need to allocate an skb to send a FIN/RST. When that happens
during memory pressure, there is a need to reclaim memory, which
in turn may ask the nvme-tcp device to write out dirty pages, however
this is not possible due to a ctrl teardown that is going on.
Set PF_MEMALLOC to the task that releases the socket to grant access
to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp
thread as this may also originate from the swap itself and should
be more resilient to memory pressure situations.
This fixes the following lockdep complaint:
--
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc2+ #25 Tainted: G W
------------------------------------------------------
kswapd0/92 is trying to acquire lock:
ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0
but task is already holding lock:
ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x11e/0x160
kmem_cache_alloc_node+0x44/0x530
__alloc_skb+0x158/0x230
tcp_send_active_reset+0x7e/0x730
tcp_disconnect+0x1272/0x1ae0
__tcp_close+0x707/0xd90
tcp_close+0x26/0x80
inet_release+0xfa/0x220
sock_release+0x85/0x1a0
nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp]
nvme_do_delete_ctrl+0x130/0x13d [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x356/0x530
vfs_write+0x4e8/0xce0
ksys_write+0xfd/0x1d0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}:
__lock_acquire+0x2a0c/0x5690
lock_acquire+0x18e/0x4f0
lock_sock_nested+0x37/0xc0
tcp_sendpage+0x23/0xa0
inet_sendpage+0xad/0x120
kernel_sendpage+0x156/0x440
nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp]
nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp]
__blk_mq_try_issue_directly+0x452/0x660
blk_mq_plug_issue_direct.constprop.0+0x207/0x700
blk_mq_flush_plug_list+0x6f5/0xc70
__blk_flush_plug+0x264/0x410
blk_finish_plug+0x4b/0xa0
shrink_lruvec+0x1263/0x1ea0
shrink_node+0x736/0x1a80
balance_pgdat+0x740/0x10d0
kswapd+0x5f2/0xaf0
kthread+0x256/0x2f0
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
lock(fs_reclaim);
lock(sk_lock-AF_INET-NVME);
*** DEADLOCK ***
3 locks held by kswapd0/92:
#0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0
#1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70
#2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp]
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_tcp_ddgst_update(), sg_init_marker() is called with an
uninitialized scatterlist. This is probably fine, but gcc complains:
CC [M] drivers/nvme/host/tcp.o
In file included from ./include/linux/dma-mapping.h:10,
from ./include/linux/skbuff.h:31,
from ./include/net/net_namespace.h:43,
from ./include/linux/netdevice.h:38,
from ./include/net/sock.h:46,
from drivers/nvme/host/tcp.c:12:
In function ‘sg_mark_end’,
inlined from ‘sg_init_marker’ at ./include/linux/scatterlist.h:356:2,
inlined from ‘nvme_tcp_ddgst_update’ at drivers/nvme/host/tcp.c:390:2:
./include/linux/scatterlist.h:234:11: error: ‘sg.page_link’ is used uninitialized [-Werror=uninitialized]
234 | sg->page_link |= SG_END;
| ~~^~~~~~~~~~~
drivers/nvme/host/tcp.c: In function ‘nvme_tcp_ddgst_update’:
drivers/nvme/host/tcp.c:388:28: note: ‘sg’ declared here
388 | struct scatterlist sg;
| ^~
cc1: all warnings being treated as errors
Use sg_init_table() instead, which basically memset the scatterlist to
zero first before calling sg_init_marker().
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)'
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned
As well, since one function returns errnos, return an `int` rather than
a `signed char`.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.
However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.
This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27). For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.
Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.
Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.
This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.
For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date. For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.
Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.
Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.
Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
RK3588(s) can have multiple gmac controllers.
Re-use rk3568 logic to distinguish them.
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221021172422.88534-1-sebastian.reichel@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a re-do of commit e0e0747de0ea ("scsi: mpt3sas: Fix return value
check of dma_get_required_mask()"), which I ended up undoing in a
mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi").
The original commit message was
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
Fix the incorrect return value check of dma_get_required_mask(). Due to
this incorrect check, the driver was always setting the DMA mask to 63 bit.
Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com
Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
and this fix was lost when I mis-merged the conflict with commit
9df650963bf6 ("scsi: mpt3sas: Don't change DMA mask while reallocating
pools").
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi")
Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC4Zg@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to
unregister the CAN device.
Fix this by unregistering can device in mcp251x_can_probe().
Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn
[mkl: adjust label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The commit 1149108e2fbf ("can: mscan: improve clock API use") only
adds put_clock() in mpc5xxx_can_remove() function, forgetting to add
put_clock() in the error handling code.
Fix this bug by adding put_clock() in the error handling code.
Fixes: 1149108e2fbf ("can: mscan: improve clock API use")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-10-24
Two fixup patches for return code changes of an earlier commit.
Wei Yongjun fixed a missed -EINVAL return on the recent change, while
Alexander Aring adds handling for unknown address type cases as well.
Miquel Raynal fixed a long standing issue with LQI value recording
which got broken 8 years ago. (It got more attention with the work
in progress enhancement in wpan).
* tag 'ieee802154-for-net-2022-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
mac802154: Fix LQI recording
net: ieee802154: fix error return code in dgram_bind()
net: ieee802154: return -EINVAL for unknown addr type
====================
Link: https://lore.kernel.org/r/20221024102301.9433-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says:
====================
mptcp: Fixes for 6.1
Patch 1 fixes an issue with assigning subflow IDs in cases where an
incoming MP_JOIN is processed before accept() completes on the MPTCP
socket.
Patches 2 and 3 fix a deadlock issue with fastopen code (new for 6.1) at
connection time.
====================
Link: https://lore.kernel.org/r/20221021225856.88119-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our CI reported lockdep splat in the fastopen code:
======================================================
WARNING: possible circular locking dependency detected
6.0.0.mptcp_f5e8bfe9878d+ #1558 Not tainted
------------------------------------------------------
packetdrill/1071 is trying to acquire lock:
ffff8881bd198140 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_wait_for_connect+0x19c/0x310
but task is already holding lock:
ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (k-sk_lock-AF_INET){+.+.}-{0:0}:
__lock_acquire+0xb6d/0x1860
lock_acquire+0x1d8/0x620
lock_sock_nested+0x37/0xd0
inet_stream_connect+0x3f/0xa0
mptcp_connect+0x411/0x800
__inet_stream_connect+0x3ab/0x800
mptcp_stream_connect+0xac/0x110
__sys_connect+0x101/0x130
__x64_sys_connect+0x6e/0xb0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (sk_lock-AF_INET){+.+.}-{0:0}:
check_prev_add+0x15e/0x2110
validate_chain+0xace/0xdf0
__lock_acquire+0xb6d/0x1860
lock_acquire+0x1d8/0x620
lock_sock_nested+0x37/0xd0
inet_wait_for_connect+0x19c/0x310
__inet_stream_connect+0x26c/0x800
tcp_sendmsg_fastopen+0x341/0x650
mptcp_sendmsg+0x109d/0x1740
sock_sendmsg+0xe1/0x120
__sys_sendto+0x1c7/0x2a0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(k-sk_lock-AF_INET);
lock(sk_lock-AF_INET);
lock(k-sk_lock-AF_INET);
lock(sk_lock-AF_INET);
*** DEADLOCK ***
1 lock held by packetdrill/1071:
#0: ffff8881b8346540 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0xfdf/0x1740
======================================================
The problem is caused by the blocking inet_wait_for_connect() releasing
and re-acquiring the msk socket lock while the subflow socket lock is
still held and the MPTCP socket requires that the msk socket lock must
be acquired before the subflow socket lock.
Address the issue always invoking tcp_sendmsg_fastopen() in an
unblocking manner, and later eventually complete the blocking
__inet_stream_connect() as needed.
Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current MPTCP connect implementation duplicates a bit of inet
code and does not use nor provide a struct proto->connect callback,
which in turn will not fit the upcoming fastopen implementation.
Refactor such implementation to use the common helper, moving the
MPTCP-specific bits into mptcp_connect(). Additionally, avoid an
indirect call to the subflow connect callback.
Note that the fastopen call-path invokes mptcp_connect() while already
holding the subflow socket lock. Explicitly keep track of such path
via a new MPTCP-level flag and handle the locking accordingly.
Additionally, track the connect flags in a new msk field to allow
propagating them to the subflow inet_stream_connect call.
Fixes: d98a82a6afc7 ("mptcp: handle defer connect in mptcp_sendmsg")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_pm_nl_get_local_id() code assumes that the msk local address
is available at that point. For passive sockets, we initialize such
address at accept() time.
Depending on the running configuration and the user-space timing, a
passive MPJ subflow can join the msk socket before accept() completes.
In such case, the PM assigns a wrong local id to the MPJ subflow
and later PM netlink operations will end-up touching the wrong/unexpected
subflow.
All the above causes sporadic self-tests failures, especially when
the host is heavy loaded.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/308
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Fixes: d045b9eb95a9 ("mptcp: introduce implicit endpoints")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a frame is sent using FDMA, the skb is mapped and then the mapped
address is given to an tx dcb that is different than the last used tx
dcb. Once the HW finish with this frame, it would generate an interrupt
and then the dcb can be reused and memory can be freed. For each dcb
there is an dcb buf that contains some meta-data(is used by PTP, is
it free). There is 1 to 1 relationship between dcb and dcb_buf.
The following issue was observed. That sometimes after changing the MTU
to allocate new tx dcbs and dcbs_buf, two frames were not
transmitted. The frames were not transmitted because when reloading the
tx dcbs, it was always presuming to use the first dcb but that was not
always happening. Because it could be that the last tx dcb used before
changing MTU was first dcb and then when it tried to get the next dcb it
would take dcb 1 instead of 0. Because it is supposed to take a
different dcb than the last used one. This can be fixed simply by
changing tx->last_in_use to -1 when the fdma is disabled to reload the
new dcb and dcbs_buff.
But there could be a different issue. For example, right after the frame
is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be
cleared. And now get the interrupt from HW that it finished with the
frame. So when we try to clear the skb, it is not possible because we
lost all the dcbs_buf.
The solution here is to stop replacing the tx dcbs and dcbs_buf when
changing MTU because the TX doesn't care what is the MTU size, it is
only the RX that needs this information.
Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221021090711.3749009-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To keep backward compatibility we used to leave attribute parsing
to the family if no policy is specified. This becomes tedious as
we move to more strict validation. Families must define reject all
policies if they don't want any attributes accepted.
Piggy back on the resv_start_op field as the switchover point.
AFAICT only ethtool has added new commands since the resv_start_op
was defined, and it has per-op policies so this should be a no-op.
Nonetheless the patch should still go into v6.1 for consistency.
Link: https://lore.kernel.org/all/20221019125745.3f2e7659@kernel.org/
Link: https://lore.kernel.org/r/20221021193532.1511293-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom.
Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding on the kernel command line "ftrace=function" triggered:
CPA detected W^X violation: 8000000000000063 -> 0000000000000063 range: 0xffffffffc0013000 - 0xffffffffc0013fff PFN 10031b
WARNING: CPU: 0 PID: 0 at arch/x86/mm/pat/set_memory.c:609
verify_rwx+0x61/0x6d
Call Trace:
__change_page_attr_set_clr+0x146/0x8a6
change_page_attr_set_clr+0x135/0x268
change_page_attr_clear.constprop.0+0x16/0x1c
set_memory_x+0x2c/0x32
arch_ftrace_update_trampoline+0x218/0x2db
ftrace_update_trampoline+0x16/0xa1
__register_ftrace_function+0x93/0xb2
ftrace_startup+0x21/0xf0
register_ftrace_function_nolock+0x26/0x40
register_ftrace_function+0x4e/0x143
function_trace_init+0x7d/0xc3
tracer_init+0x23/0x2c
tracing_set_tracer+0x1d5/0x206
register_tracer+0x1c0/0x1e4
init_function_trace+0x90/0x96
early_trace_init+0x25c/0x352
start_kernel+0x424/0x6e4
x86_64_start_reservations+0x24/0x2a
x86_64_start_kernel+0x8c/0x95
secondary_startup_64_no_verify+0xe0/0xeb
This is because at boot up, kernel text is writable, and there's no
reason to do tricks to updated it. But the verifier does not
distinguish updates at boot up and at run time, and causes a warning at
time of boot.
Add a check for system_state == SYSTEM_BOOTING and allow it if that is
the case.
[ These SYSTEM_BOOTING special cases are all pretty horrid, but the x86
text_poke() code does some odd things at bootup, forcing this for now
- Linus ]
Link: https://lore.kernel.org/r/20221024112730.180916b3@gandalf.local.home
Fixes: 652c5bf380ad0 ("x86/mm: Refuse W^X violations")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmNW024ACgkQMUZtbf5S
IrvX7w//SP/zKZwgzC13zd2rrCP16TX2QvkHPmSLvcldQDXdCypmsoc5Vb8UNpkG
jwAuy2pxqPy2oxTwTBQv9TNRT2oqEFOsFTK+w410whlL7g1wZ02aXU8qFhV2XumW
o4gRtM+UISPUKFbOnawdK1XlrNdeLF3bjETvW2GP9zxCb0iqoQXtDDNKxv2B2iQA
MSyTtzHA4n9GS7LKGtPgsP2Ose7h1Z+AjTIpQH1nvfEHJUf/wmxUdCK+fuwfeLjY
PhmYaPG/333j1bfBk1Ms/nUYA5KRXlEj9A/7jDtxhxNEwaTNKyLB19a6oVxXxpSQ
x/k+nZP1RColn5xeco5a1X9aHHQ46PJQ8wVAmxYDIeIA5XPMgShNmhAyjrq1ac+o
9vYeYpmnMGSTLdBMvGbWpynWHe7SddgF8LkbnYf2HLKbxe4bgkOnmxOUH4q9iinZ
MfVSknjax4DP0C7X1kGgR6WyltWnkrahOdUkINsIUNxj0KxJa/eStpJIbJrfkxNV
gHbOjB2/bF3SXENrS4A0IJCgsbO9YugN83Eyu0WDWQOw9wVgopzxOJx9R+H0wkVH
XpGGP8qi1DZiTE3iQiq1LHj6f6kirFmtt9QFH5yzaqtKBaqXakHaXwUO4VtD+BI9
NPFKvFL6jrp8EAn0PTM/RrvhJZN+V0bFXiyiMe0TLx+aR0UMxGc=
=dD6N
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
This pull request contains a commit that fixes bf95b2bc3e42 ("rcu: Switch
polled grace-period APIs to ->gp_seq_polled"), which could incorrectly
leave interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order to
properly interact with polled grace periods, but the code did not take
into account the possibility of synchronize_rcu() being invoked from
the portion of the boot sequence during which interrupts are disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore.
-----BEGIN PGP SIGNATURE-----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=o6hI
-----END PGP SIGNATURE-----
Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"Fix a regression caused by commit bf95b2bc3e42 ("rcu: Switch polled
grace-period APIs to ->gp_seq_polled"), which could incorrectly leave
interrupts enabled after an early-boot call to synchronize_rcu().
Such synchronize_rcu() calls must acquire leaf rcu_node locks in order
to properly interact with polled grace periods, but the code did not
take into account the possibility of synchronize_rcu() being invoked
from the portion of the boot sequence during which interrupts are
disabled.
This commit therefore switches the lock acquisition and release from
irq to irqsave/irqrestore"
* tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Keep synchronize_rcu() from enabling irqs in early boot
This KUnit fixes update for Linux 6.1-rc3 consists of one single fix
to update alloc_string_stream() callers to check for IS_ERR() instead
of NULL to be in sync with alloc_string_stream() returning IS_ERR().
-----BEGIN PGP SIGNATURE-----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=rHRJ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"One single fix to update alloc_string_stream() callers to check for
IS_ERR() instead of NULL to be in sync with alloc_string_stream()
returning an ERR_PTR()"
* tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: update NULL vs IS_ERR() tests
- Fix typos in UART1 and MMC in the Ingenic driver.
- A really well researched glitch bug fix to the Qualcomm driver
that was tracked down and fixed by Dough Anderson from
Chromium. Hats off for this one!
- Revert two patches on the Xilinx ZynqMP driver: this needs a
proper solution making use of firmware version information to
adapt to different firmware releases.
- Fix interrupt triggers in the Ocelot driver.
-----BEGIN PGP SIGNATURE-----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=w7Lm
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix typos in UART1 and MMC in the Ingenic driver
- A really well researched glitch bug fix to the Qualcomm driver that
was tracked down and fixed by Dough Anderson from Chromium. Hats off
for this one!
- Revert two patches on the Xilinx ZynqMP driver: this needs a proper
solution making use of firmware version information to adapt to
different firmware releases
- Fix interrupt triggers in the Ocelot driver
* tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix incorrect trigger of the interrupt.
Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"
pinctrl: qcom: Avoid glitching lines when we first mux to output
pinctrl: Ingenic: JZ4755 bug fixes
This file was split in commit 5d945cbcd4b16a29d6470a80dfb19738f9a4319f
("drm/amd/display: Create a file dedicated to planes") and the logic in
dm_plane_format_mod_supported() function got changed by a switch logic.
That change broke drm_plane modifiers setting on series 5000 APUs
(tested on OXP mini AMD 5800U and HP Dev One 5850U PRO)
leading to Gamescope not working as reported on GitHub[1]
To reproduce the issue, enter a TTY and run:
$ gamescope -- vkcube
With said commit applied it will abort. This one restores the old logic,
fixing the issue that affects Gamescope.
[1](https://github.com/Plagman/gamescope/issues/624)
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IMU is a new firmware for GFX11.
There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.
Add IMU as an option for those four methods.
V2: Added debugfs
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx[i] exists even if the pipe is not
in use. If the pipe is not in use it will
always have a null stream, so don't return
false in this case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>