IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We don't want mac80211 try to check MMIC and other security mechanisms.
So, the driver remove all the data related to the encryption (IV, ICV,
MMIC).
However, enabling RX_FLAG_PN_VALIDATED is sufficient for that.
So, drop the useless function wfx_drop_encrypt_data() and enable
RX_FLAG_PN_VALIDATED.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that in the old days, the RSSI information could be missing. In
this case, in order to not pollute the RSSI stats, the frame was
dropped (!).
It is far better to mark the frame with the flag RX_FLAG_NO_SIGNAL_VAL.
In add, the problem seems now fixed in the firmware (at least, it has
not been encountered with recent firmwares).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver does not call ieee80211_sta_set_buffered() anymore, it
is no more necessary to maintain a counter of buffered frames for each
stations.
This change allows to simplify the processing in multiple places in the
driver.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a station go to sleep, the driver receive the status REQUEUE and
forward this answer to mac80211. So, neither the driver, neither the
hardware buffer the frames. So the call to ieee80211_sta_set_buffered is
useless.
In add, it seems that mac80211 does not expect to receive
ieee80211_sta_set_buffered(false) after the station is asleep(). When
the device send data to a station, the following sequence can be
observed:
- Mac80211 call wfx_sta_notify(awake).
- The driver calls ieee80211_sta_set_buffered(true). Since the
station is awake, its TIM is not set.
- Mac80211 receive a power save notification from the station, so it
calls wfx_sta_notify(asleep).
- Then, since the driver has declared it has buffered some frames,
the TIM of the station should be set. This action is delayed by
mac80211.
- The device also notice the station go to sleep. It replies the
REQUEUE status for the buffered frames. The driver forward this
status to mac80211.
- There is no more frames in queues, so the driver call
ieee80211_sta_set_buffered(false).
- Mac80211 updates the TIM but since there is no frames buffered by
the driver, it set the TIM for the station to 0.
Anyway, correctly use the ieee80211_sta_set_buffered() API solves the
problem.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the loading of the firmware, the WFX_DCA_GET register provide the
number available bytes in the receiving buffer. It is not necessary to
access to the WFX_DCA_GET after sent of each firmware fragment.
This patch allows to send the firmware:
- in 64ms instead of 130ms using SDIO bus
- in 78ms instead of 115ms using SPI bus
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device is able to send multiple Tx confirmations in the one reply.
In this case, there is only one vif identifier for all the
confirmations.
Unfortunately, to generate this kind of messages the device squashes all
the confirmations whatever their vif ID and use the vif ID of the first
confirmation. So, the driver cannot rely on the vif ID mentioned in the
header. Fortunately, using the packet_id, the driver can retrieve the Tx
request and the associated vif.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the driver has sent a frame on a virtual interface (vif), it
expects to receive the confirmation on the same vif.
This patch add a check for that.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.
This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "static" for local methods wfx_get_ps_timeout() and
wfx_update_pm() to address following sparse warnings.
wfx/sta.c:203:5: warning: symbol 'wfx_get_ps_timeout' was not declared. Should it be static?
wfx/sta.c:233:5: warning: symbol 'wfx_update_pm' was not declared. Should it be static?
Signed-off-by: Julius Hemanth Pitti <juliushemanth@gmail.com>
Link: https://lore.kernel.org/r/1591737854-11855-1-git-send-email-juliushemanth@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function hif_scan() return the timeout for the completion of the
scan request. It is the only function from hif_tx.c that return another
thing than just an error code. This behavior is not coherent with the
rest of file. Worse, if value returned is positive, the caller can't
make say if it is a timeout or the value returned by the hardware.
Uniformize API with other HIF functions, only return the error code and
pass timeout with parameters.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121256.1045521-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is guarantee that the loop will stop at first iteration. So drop the
loop.
Fixes: 6bf418c50f98a ("staging: wfx: change the way to choose frame to send")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121603.1050891-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to work properly all the queues of the device must be filled (the
device chooses itself the queue to use depending of AC parameters and
other things). It is the job of wfx_tx_queues_get_skb() to choose which
queue must be filled. However, the sorting algorithm was inverted, so it
prioritized the already filled queue! Consequently, the AC priorities was
badly broken.
Fixes: 6bf418c50f98a ("staging: wfx: change the way to choose frame to send")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200529121603.1050891-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the next commit, we will have to compute the PS timeout without
changing the power save status of the device. This patch introduces
wfx_get_ps_timeout() for that job and make wfx_update_pm() relies on it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Power Save status is stored for each virtual interface and for the
whole device. The WF200 is able to handle power saving per interface, so
use the value stored in vif.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During the calibration of the RF amplifier, the device is able to provide
some data about the status of the amplifier.
Record these data and expose them in debugfs.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function wfx_pending_requeue() is not used anymore since the
commit 7a44644c9379e ("staging: wfx: introduce
wfx_set_default_unicast_key()")
Fixes: 7a44644c9379e ("staging: wfx: introduce wfx_set_default_unicast_key()")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the commit 3f84adfe1d7ae ("staging: wfx: remove hack about tx_rate
policies"), the variable "count" is no more used in wfx_tx_policy_build().
Notice that there were two instances of the variable "count" in
wfx_tx_policy_build(). This patch also solves this cosmetic issue.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 3f84adfe1d7ae ("staging: wfx: remove hack about tx_rate policies")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200526171821.934581-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a station is removed, the driver check that all the Tx frames were
correctly sent. However, the station can be removed before all the Tx
frames were acknowledged and a false positive warning can be emitted.
The previous commit has added a trace when driver received an
acknowledge for a non-existent station. It appear that these events
are perfectly correlated and there is no leak.
Now, the subject is perfectly understood. Remove the warning. Just keep
a debug trace in case we have any doubt in the future.
In the past, the subject has already been discussed here:
https://lore.kernel.org/driverdev-devel/6287924.ghGFUMk3OD@pc-42/
Fixes: 4bbc6a3e7ad0 ("staging: wfx: make warning about pending frame less scary")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some resources are associated to the outgoing of the stations. To avoid
any resource leaks. It is important to understand why an acknowledge is
not associated to any station.
Add a trace for that purpose.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function wfx_tx_flush() wait for there is no more queued frames in
hardware queue. Then, for the sanity, it checks that there is no more
pending frame on any AC queue.
However, there is a race here. It may happens that hardware queues are
empty, but the counters of the AC queues are not yet updated. So, it may
produce false-positive warning.
The easiest way to solve the problem is just to remove the sanity check.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-18-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when mac80211 want to disable beacon filtering, the driver
reset the filter table and disable the beacon filtering. Only the latter
action is required.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple vif are in use (= one access point and one station), and
when the channels are different, it is necessary to enable power save on
station.
The firmware check that steps are done in the correct order:
- AP can't start if PS is not enable on the station
- PS can't set on the station before the association has finished
(= before the call set_bss_params)
Obviously, in add, when one of the interface disappears, it is necessary to
restore the power save status.
wfx_update_pm() is able to set the correct PS configuration. But it has
to be called at the right time:
1. before hif_start(), but after the channel configuration is known
2. after hif_set_bss_params()
3. after hif_reset()
Therefore, the call to wfx_update_pm() from wfx_add_interface() is too
early to address 1.
The call after hif_set_bss_params() already exists.
For the symmetry, the call from wfx_remove_interface() (that handle 3.)
is also relocated.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device disallows to start a scan request between hif_join() and
hif_set_bss_params(). The driver is not protected against that. The
worst case happens when association is aborted and hif_set_bss_params()
never happens.
mac80211 would never ask for scan during the association process. So,
this patch just aborts the association in progress when scan is
requested.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fact, wfx_do_unjoin() resets the interface. This mechanism can be
used in more cases than just disassociating from a BSS. So, rename it to
reflect that fact.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wfx_tx_policy_put() use data from the skb. However, the call to
skb_pull() has just discarded them (even if the memory is in fact not
really discarded).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function wfx_notify_buffered_tx() need to know if the frame was
associated to a station. This information is available in the Control
Buffer (CB) of the skb. However, when wfx_notify_buffered_tx() is
called, the CB is no more available. Thus, the caller has to take care
of this information.
wfx_notify_buffered_tx() is a specific case. All the other function are
called before the destruction of the CB. So, this patch align the API of
wfx_notify_buffered_tx() with the other functions. Call it before the CB
was destroyed and drop the extra argument 'has_sta'.
It is also the right time to rename it into wfx_tx_update_sta() (which
is closer to the behavior of the function).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wfx_tx_confirm_cb() is a big function. A big part of its body aims to
fill the rates list. So, create a new function wfx_tx_fill_rates() and
make wfx_tx_confirm_cb() smaller.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When wfx_flush() is called, the status of pending frames are reported to
mac80211 with random status. mac80211 probably won't interpret this
status in this case, but it is cleaner to return a correctly initialized
status.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before to start the scan request, the firmware signals (with a null
frame) to the AP it won't be able to receive data. This frame can be
long to send: up to 512TU. The current calculus of the scan timeout does
not take into account this delay.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Strings are allowed to exceed 80 columns but, in this case, the format
arguments should be placed on a new line. Apply this rule to the whole
code of the driver.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device does not answer to the command hif_shutdown. Therefore,
hif_shutdown() is a bit special. It bypasses some of work normally made
by wfx_cmd_send(). In particularly, it unlock hif_cmd.lock and
hif_cmd.key_renew_lock.
However, if the driver notice that the device is frozen, wfx_cmd_send()
stops to send data and doesn't lock the mutexes. Then, it produced a
warning when hif_shutdown() tried to unlock these mutexes.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200515083325.378539-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to release the tx_lock on the error path before returning.
Fixes: d1c015b4ef6f ("staging: wfx: rewrite wfx_hw_scan()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512083656.GA251760@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'channel_number' from the structs hif_ind_rx and hif_req_start
is a __le32. Sparse complains this field is not always correctly
accessed:
drivers/staging/wfx/data_rx.c:95:55: warning: incorrect type in argument 1 (different base types)
drivers/staging/wfx/data_rx.c:95:55: expected int chan
drivers/staging/wfx/data_rx.c:95:55: got restricted __le16 const [usertype] channel_number
However, the value of channel_number cannot be greater than 14 (this
device only support 2.4Ghz band). So, we only have to access to the
least significant byte. It is finally easier to declare it as an array
of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'num_tx_confs' from the struct hif_cnf_multi_transmit is a
__le32. Sparse complains this field is not always correctly accessed:
drivers/staging/wfx/hif_rx.c:82:9: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:87:29: warning: restricted __le32 degrades to integer
However, the value of num_tx_confs cannot be greater than 15. So, we
only have to access to the least significant byte. It is finally easier
to declare it as an array of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'status' appears in most of structs returned by the hardware.
This field is encoded as little endian. Sparse complains this field is
not always correctly accessed:
drivers/staging/wfx/data_rx.c:53:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_rx.c:84:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:526:24: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:569:23: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:128:33: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
In most of cases, this field is only compared with HIF_STATUS values.
Finally, it is more convenient to solve the problem by defining the
HIF_STATUS values directly in little endian.
It is also the right time to make some clean up in the HIF_STATUS names.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about the accesses to the field 'len' from struct hif_msg:
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: cast to restricted __le16
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:121:25: warning: incorrect type in argument 2 (different base types)
drivers/staging/wfx/bh.c:121:25: expected unsigned int len
drivers/staging/wfx/bh.c:121:25: got restricted __le16 [usertype] len
drivers/staging/wfx/hif_rx.c:27:22: warning: restricted __le16 degrades to integer
drivers/staging/wfx/hif_rx.c:347:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:347:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:347:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:365:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/debug.c:319:20: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
Indeed, the attribute len is little-endian. We have to take to the
endianness when we access it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct hif_ind_startup is received from the hardware. So it is
declared as little endian. However, it is also stored in the main driver
structure and used on different places in the driver. Sparse complains
about that:
drivers/staging/wfx/data_tx.c:388:43: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:199:9: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:221:62: warning: restricted __le16 degrades to integer
In order to make Sparse happy and to keep access from the driver easy,
this patch declare hif_ind_startup with native endianness.
On reception of this struct, this patch takes care to do byte-swap and
keep Sparse happy.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field packet_id is not interpreted by the device. It is only used as
identifier for the device answer. So it is not necessary to declare it
little endian. It fixes some warnings raised by Sparse without
complexifying the code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
