IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We're currently tracking rx_nss for each station, and that
is meant to be initialized to the capability NSS and later
reduced by the operating mode notification NSS.
However, we're mixing up capabilities and operating mode
NSS in the same variable. This forces us to recalculate
the NSS capability on operating mode notification RX,
which is a bit strange; due to the previous fix I had to
never keep rx_nss as zero, it also means that the capa is
never taken into account properly.
Fix all this by storing the capability value, that can be
recalculated unconditionally whenever needed, and storing
the operating mode notification NSS separately, taking it
into account when assigning the final rx_nss value.
Cc: stable@vger.kernel.org
Fixes: dd6c064cfc3f ("wifi: mac80211: set station RX-NSS on reconfig")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228120157.0e1c41924d1d.I0acaa234e0267227b7e3ef81a59117c8792116bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have an nl80211 attribute to mask supported rates from
probe responses in scanning, e.g. for use in P2P, but in
the refactoring I stopped applying this mask. Restore it.
Fixes: 07095d167749 ("wifi: mac80211: start building elements in SKBs")
Link: https://msgid.link/20240301175451.7ad8ab0bd90c.I46b49e4fc27fe60b75d4559c01104e55ed381c37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the assoc link doesn't exist yet at this point, we
cannot use it yet. This isn't normally the case, but
e.g. in case of FT-DS (or just broken userspace) the
link might not be set up yet and will only be created
later in this function. Check that the link exists.
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3151f5d0-c18f-413d-b34b-b94f095b947c@moroto.mountain
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240301193633.c886d300e90a.Ie1d5e23b2a033d934d343c37249f6f4dfddcc5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.
If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.
If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:
id 10 flags 10.0.3.2
This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().
Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --header \
-o net/mptcp/mptcp_pm_gen.h
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da1e48
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most TCP-level socket options get an integer from user space, and
set the corresponding field under the msk-level socket lock.
Reduce the code duplication moving such operations in the common code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for such socket option storing the user-space provided
value in a new msk field, and using such data to implement the
_mptcp_stream_memory_free() helper, similar to the TCP one.
To avoid adding more indirect calls in the fast path, open-code
a variant of sk_stream_memory_free() in mptcp_sendmsg() and add
direct calls to the mptcp stream memory free helper where possible.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/464
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp_get_int_option() helper is needless open-coded in a
couple of places, replace the duplicate code with the helper
call.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 5cf92bbadc58 ("mptcp: re-enable sndbuf autotune"), the
MPTCP_NOSPACE bit is redundant: it is always set and cleared together with
SOCK_NOSPACE.
Let's drop the first and always relay on the latter, dropping a bunch
of useless code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.
This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).
Fixes: 950ab53b77ab ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_tunnel driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire to gain access to the
Rx protocol header. In future, the wire header will be stored in a page
frag, not in the rxrpc_txbuf struct making it possible to use
MSG_SPLICE_PAGES when sending it.
Similarly, access the ack header as being immediately after the wire header
when filling out an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chain RDMA Writes that convey Write chunks onto the local Send
chain. This means all WRs for an RPC Reply are now posted with a
single ib_post_send() call, and there is a single Send completion
when all of these are done. That reduces both the per-transport
doorbell rate and completion rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor to eventually enable svcrdma to post the Write WRs for each
RPC response using the same ib_post_send() as the Send WR (ie, as a
single WR chain).
svc_rdma_result_payload (originally svc_rdma_read_payload) was added
so that the upper layer XDR encoder could identify a range of bytes
to be possibly conveyed by RDMA (if a Write chunk was provided by
the client).
The purpose of commit f6ad77590a5d ("svcrdma: Post RDMA Writes while
XDR encoding replies") was to post as much of the result payload
outside of svc_rdma_sendto() as possible because svc_rdma_sendto()
used to be called with the xpt_mutex held.
However, since commit ca4faf543a33 ("SUNRPC: Move xpt_mutex into
socket xpo_sendto methods"), the xpt_mutex is no longer held when
calling svc_rdma_sendto(). Thus, that benefit is no longer an issue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reduce the doorbell and Send completion rates when sending RPC/RDMA
replies that have Reply chunks. NFS READDIR procedures typically
return their result in a Reply chunk, for example.
Instead of calling ib_post_send() to post the Write WRs for the
Reply chunk, and then calling it again to post the Send WR that
conveys the transport header, chain the Write WRs to the Send WR
and call ib_post_send() only once.
Thanks to the Send Queue completion ordering rules, when the Send
WR completes, that guarantees that Write WRs posted before it have
also completed successfully. Thus all Write WRs for the Reply chunk
can remain unsignaled. Instead of handling a Write completion and
then a Send completion, only the Send completion is seen, and it
handles clean up for both the Writes and the Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since the RPC transaction's svc_rdma_send_ctxt will stay around for
the duration of the RDMA Write operation, the write_info structure
for the Reply chunk can reside in the request's svc_rdma_send_ctxt
instead of being allocated separately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Eventually I'd like the server to post the reply's Send WR along
with any Write WRs using only a single call to ib_post_send(), in
order to reduce the NIC's doorbell rate.
To do this, add an anchor for a WR chain to svc_rdma_send_ctxt, and
refactor svc_rdma_send() to post this WR chain to the Send Queue. For
the moment, the posted chain will continue to contain a single Send
WR.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In some error flow cases, svc_rdma_wc_send() releases @ctxt. Copy
the sc_cid field in @ctxt to a stack variable in order to guarantee
that the value is available after the ib_post_send() call.
In case the new comment looks a little strange, this will be done
with at least one more field in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Ensure there is a wake-up when increasing sc_sq_avail.
Likewise, if a wake-up is done, sc_sq_avail needs to be updated,
otherwise the wait_event() conditional is never going to be met.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
rdma_rw_mr_factor() returns the smallest number of MRs needed to
move a particular number of pages. svcrdma currently asks for the
number of MRs needed to move RPCSVC_MAXPAGES (a little over one
megabyte), as that is the number of pages in the largest r/wsize
the server supports.
This call assumes that the client's NIC can bundle a full one
megabyte payload in a single rdma_segment. In fact, most NICs cannot
handle a full megabyte with a single rkey / rdma_segment. Clients
will typically split even a single Read chunk into many segments.
The server needs one MR to read each rdma_segment in a Read chunk,
and thus each one needs an rw_ctx.
svcrdma has been vastly underestimating the number of rw_ctxs needed
to handle 64 RPC requests with large Read chunks using small
rdma_segments.
Unfortunately there doesn't seem to be a good way to estimate this
number without knowing the client NIC's capabilities. Even then,
the client RPC/RDMA implementation is still free to split a chunk
into smaller segments (for example, it might be using physical
registration, which needs an rdma_segment per page).
The best we can do for now is choose a number that will guarantee
forward progress in the worst case (one page per segment).
At some later point, we could add some mechanisms to make this
much less of a problem:
- Add a core API to add more rw_ctxs to an already-established QP
- svcrdma could treat rw_ctx exhaustion as a temporary error and
try again
- Limit the number of Reads in flight
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
rdma_create_qp() can modify cap.max_send_sges. Copy the new value
to the svcrdma transport so it is bound by the new limit instead
of the requested one.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Do as other ULPs already do: ensure there is an extra Receive WQE
reserved for the tear-down drain WR. I haven't heard reports of
problems but it can't hurt.
Note that rq_depth is used to compute the Send Queue depth as well,
so this fix should affect both the SQ and RQ.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
bc_close() and bc_destroy now do something, so the comments are
no longer correct. Commit 6221f1d9b63f ("SUNRPC: Fix backchannel
RPC soft lockups") should have removed these.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_process_bc(), previously known as bc_svc_process(), was
added in commit 4d6bbb6233c9 ("nfs41: Backchannel bc_svc_process()")
but there has never been a call site outside of the sunrpc.ko
module.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd is the only thing using this helper, and it doesn't use the private
currently. When we switch to per-network namespace stats we will need
the struct net * in order to get to the nfsd_net. Use the net as the
proc private so we can utilize this when we make the switch over.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since only one service actually reports the rpc stats there's not much
of a reason to have a pointer to it in the svc_program struct. Adjust
the svc_create_pooled function to take the sv_stats as an argument and
pass the struct through there as desired instead of getting it from the
svc_program->pg_stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We check for the existence of ->sv_stats elsewhere except in the core
processing code. It appears that only nfsd actual exports these values
anywhere, everybody else just has a write only copy of sv_stats in their
svc_program. Add a check for ->sv_stats before every adjustment to
allow us to eliminate the stats struct from all the users who don't
report the stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allocating and zeroing a buffer during every call to
krb5_etm_checksum() is inefficient. Instead, set aside a static
buffer that is the maximum crypto block size, and use a portion
(or all) of that.
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The creds and oa->data need to be freed in the error-handling paths after
their allocation. So this patch add these deallocations in the
corresponding paths.
Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The ctx->mech_used.data allocated by kmemdup is not freed in neither
gss_import_v2_context nor it only caller gss_krb5_import_sec_context,
which frees ctx on error.
Thus, this patch reform the last call of gss_import_v2_context to the
gss_krb5_import_ctx_v2, preventing the memleak while keepping the return
formation.
Fixes: 47d848077629 ("gss_krb5: handle new context format from gssd")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
1) inet_dump_ifaddr() can can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the following patch, inet_base_seq() will no longer be called
with RTNL held.
Add READ_ONCE()/WRITE_ONCE() annotations in dev_base_seq_inc()
and inet_base_seq().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ifa->ifa_flags can be read locklessly.
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ifa->ifa_preferred_lft can be read locklessly.
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ifa->ifa_valid_lft can be read locklessly.
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ifa->ifa_tstamp can be read locklessly.
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
Do the same for ifa->ifa_cstamp to prepare upcoming changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) inet6_netconf_dump_devconf() can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
3) Do not use inet6_base_seq() anymore, for_each_netdev_dump()
has nice properties. Restarting a GETDEVCONF dump if a device has
been added/removed or if net->ipv6.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
