IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As shown in [1], out-of-bounds access occurs in two cases:
1)when the qdisc of the taprio type is used to replace the previously
configured taprio, count and offset in tc_to_txq can be set to 0. In this
case, the value of *txq in taprio_next_tc_txq() will increases
continuously. When the number of accessed queues exceeds the number of
queues on the device, out-of-bounds access occurs.
2)When packets are dequeued, taprio can be deleted. In this case, the tc
rule of dev is cleared. The count and offset values are also set to 0. In
this case, out-of-bounds access is also caused.
Now the restriction on the queue number is added.
[1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg
Fixes: 2f530df76c ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode")
Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on skb->transport_header being set correctly, opt
instead to parse the L3 header length out of the L3 headers for both
IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a
bug if GRO is disabled, when GRO is disabled skb->transport_header is
set by __netif_receive_skb_core() to point to the L3 header, it's later
fixed by the upper protocol layers, but act_pedit will receive the SKB
before the fixups are completed. The existing behavior causes the
following to edit the L3 header if GRO is disabled instead of the UDP
header:
tc filter add dev eth0 ingress protocol ip flower ip_proto udp \
dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053
Also re-introduce a rate-limited warning if we were unable to extract
the header offset when using the 'ex' interface.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to
the conventional network headers")
Signed-off-by: Max Tottenham <mtottenh@akamai.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
try_module_get will be called in tcf_proto_lookup_ops. So module_put needs
to be called to drop the refcount if ops don't implement the required
function.
Fixes: 9f407f1768 ("net: sched: introduce chain templates")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes following sparse errors:
net/sched/act_police.c:360:28: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:362:45: warning: dereference of noderef expression
net/sched/act_police.c:368:28: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:370:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
net/sched/act_police.c:376:45: warning: dereference of noderef expression
Fixes: d1967e495a ("net_sched: act_police: add 2 new attributes to support police 64bit rate and peakrate")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c,
thus should be declared in an include file.
This fixes the following sparse warning:
net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?
Fixes: e331473fee ("net/sched: cls_api: add missing validation of netlink attributes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following sparse warning:
net/sched/sch_api.c:2305:1: sparse: warning: symbol 'tc_skip_wrapper' was not declared. Should it be static?
No functional change intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.
Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, after creating an ingress (or clsact) Qdisc and grafting it
under TC_H_INGRESS (TC_H_CLSACT), it is possible to graft it again under
e.g. a TBF Qdisc:
$ ip link add ifb0 type ifb
$ tc qdisc add dev ifb0 handle 1: root tbf rate 20kbit buffer 1600 limit 3000
$ tc qdisc add dev ifb0 clsact
$ tc qdisc link dev ifb0 handle ffff: parent 1:1
$ tc qdisc show dev ifb0
qdisc tbf 1: root refcnt 2 rate 20Kbit burst 1600b lat 560.0ms
qdisc clsact ffff: parent ffff:fff1 refcnt 2
^^^^^^^^
clsact's refcount has increased: it is now grafted under both
TC_H_CLSACT and 1:1.
ingress and clsact Qdiscs should only be used under TC_H_INGRESS
(TC_H_CLSACT). Prohibit regrafting them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently it is possible to add e.g. an HTB Qdisc under ffff:fff1
(TC_H_INGRESS, TC_H_CLSACT):
$ ip link add name ifb0 type ifb
$ tc qdisc add dev ifb0 parent ffff:fff1 htb
$ tc qdisc add dev ifb0 clsact
Error: Exclusivity flag on, cannot modify.
$ drgn
...
>>> ifb0 = netdev_get_by_name(prog, "ifb0")
>>> qdisc = ifb0.ingress_queue.qdisc_sleeping
>>> print(qdisc.ops.id.string_().decode())
htb
>>> qdisc.flags.value_() # TCQ_F_INGRESS
2
Only allow ingress and clsact Qdiscs under ffff:fff1. Return -EINVAL
for everything else. Make TCQ_F_INGRESS a static flag of ingress and
clsact Qdiscs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clsact Qdiscs are only supposed to be created under TC_H_CLSACT (which
equals TC_H_INGRESS). Return -EOPNOTSUPP if 'parent' is not
TC_H_CLSACT.
Fixes: 1f211a1b92 ("net, sched: add clsact qdisc")
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ingress Qdiscs are only supposed to be created under TC_H_INGRESS.
Return -EOPNOTSUPP if 'parent' is not TC_H_INGRESS, similar to
mq_init().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Tested-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 32eff6bace.
Superseded by the following commit in this series.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 08a0063df3 ("net/sched: flower: Move filter handle initialization
earlier") moved filter handle initialization but an assignment of
the handle to fnew->handle is done regardless of fold value. This is wrong
because if fold != NULL (so fold->handle == handle) no new handle is
allocated and passed handle is assigned to fnew->handle. Then if any
subsequent action in fl_change() fails then the handle value is
removed from IDR that is incorrect as we will have still valid old filter
instance with handle that is not present in IDR.
Fix this issue by moving the assignment so it is done only when passed
fold == NULL.
Prior the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
exit: 123
exit: 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
All test results:
1..1
not ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Command exited with 123, expected 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
After the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
All test results:
1..1
ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230425140604.169881-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two parameters can be transformed into netlink policies and
validated while parsing the netlink message.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error messages are still being printed to dmesg.
Since extack is available, provide error messages there.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some error messages are still being printed to dmesg.
Since extack is available, provide error messages there.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unbounded info messages in the pedit datapath can flood the printk
ring buffer quite easily depending on the action created.
As these messages are informational, usually printing some, not all,
is enough to bring attention to the real issue.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netlink parsing already validates the key 'htype'.
Remove the datapath check as it's redundant.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static key offsets should always be on 32 bit boundaries. Validate them on
create/update time for static offsets and move the datapath validation
for runtime offsets only.
iproute2 already errors out if a given offset and data size cannot be
packed to a 32 bit boundary. This change will make sure users which
create/update pedit instances directly via netlink also error out,
instead of finding out when packets are traversing.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have extack available when parsing 'ex' keys, so pass it to
tcf_pedit_keys_ex_parse and add more detailed error messages.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Transform two checks in the 'ex' key parsing into netlink policies
removing extra if checks.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will print several warnings in a short period of time
when it stalls. Like this:
First warning:
[ 7100.097547] ------------[ cut here ]------------
[ 7100.097550] NETDEV WATCHDOG: eno2 (xxx): transmit queue 8 timed out
[ 7100.097571] WARNING: CPU: 8 PID: 0 at net/sched/sch_generic.c:467
dev_watchdog+0x260/0x270
...
Second warning:
[ 7147.756952] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 7147.756958] rcu: 24-....: (59999 ticks this GP) idle=546/1/0x400000000000000
softirq=367 3137/3673146 fqs=13844
[ 7147.756960] (t=60001 jiffies g=4322709 q=133381)
[ 7147.756962] NMI backtrace for cpu 24
...
We calculate that the transmit queue start stall should occur before
7095s according to watchdog_timeo, the rcu start stall at 7087s.
These two times are close together, it is difficult to confirm which
happened first.
To let users know the exact time the stall started, print msecs when
the transmit queue time out.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function tcf_exts_init_ex() sets exts->miss_cookie_node ptr only
when use_action_miss is true so it assumes in other case that
the field is set to NULL by the caller. If not then the field
contains garbage and subsequent tcf_exts_destroy() call results
in a crash.
Ensure that the field .miss_cookie_node pointer is NULL when
use_action_miss parameter is false to avoid this potential scenario.
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230420183634.1139391-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7b3a3c7e36d03068707a021760a194a8eb5ad41a.1682002300.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SCTP is not universally deployed, allow hiding its bit
from the skb.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Palash reports a UAF when using a modified version of syzkaller[1].
When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.
Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.
[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus
v1->v2: Fix compilation on configs without tc actions (kernel test robot)
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes: 3015f3d2a3 ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a duplication of the FP adminStatus logic introduced for
tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload
structure embedded within tc_taprio_qopt_offload. So practically, if a
device driver is written to treat the mqprio portion of taprio just like
standalone mqprio, it gets unified handling of frame preemption.
I would have reused more code with taprio, but this is mostly netlink
attribute parsing, which is hard to transform into generic code without
having something that stinks as a result. We have the same variables
with the same semantics, just different nlattr type values
(TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12;
TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and
consequently, different policies for the nest.
Every time nla_parse_nested() is called, an on-stack table "tb" of
nlattr pointers is allocated statically, up to the maximum understood
nlattr type. That array size is hardcoded as a constant, but when
transforming this into a common parsing function, it would become either
a VLA (which the Linux kernel rightfully doesn't like) or a call to the
allocator.
Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q
Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE"
and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE"
use cases. HOLD and RELEASE events are emitted towards the underlying
MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a
Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space,
one can distinguish between the 2 use cases by choosing whether to use
the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate
operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES.
A small part of the change is dedicated to refactoring the max_sdu
nlattr parsing to put all logic under the "if" that tests for presence
of that nlattr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).
The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:
| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.
It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.
I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).
The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.
Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.
Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.
Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.
In fact, the taprio handling is a bit more tricky, for 2 reasons.
First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().
The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ferenc reports that a combination of poor iproute2 defaults and obscure
cases where the kernel returns -EINVAL make it difficult to understand
what is wrong with this command:
$ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1
$ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
RTNETLINK answers: Invalid argument
Hopefully with this patch, the cause is clearer:
Error: Device does not support hardware offload.
The kernel was (and still is) rejecting this because iproute2 defaults
to "hw 1" if this command line option is not specified.
Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.
Try to make errors less sour by giving user space some information
regarding what went wrong.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 4e8b86c062 ("mqprio: Introduce new hardware offload mode and
shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to
contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt))
and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space)
following immediately afterwards.
In commit feb2cf3dcf ("net/sched: mqprio: refactor nlattr parsing to a
separate function"), we've moved the nlattr handling to a smaller
function, but yet, a small parse_attr() still remains, and the larger
mqprio_parse_nlattr() still does not have access to the beginning, and
the length, of the TCA_OPTIONS region containing these other nlattrs.
In a future change, the mqprio qdisc will need to iterate through this
nlattr region to discover other attributes, so eliminate parse_attr()
and add 2 variables in mqprio_parse_nlattr() which hold the beginning
and the length of the nlattr range.
We avoid the need to memset when nlattr_opt_len has insufficient length
by pre-initializing the table "tb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes typos in net/sched/* files.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 places in the act api code are using 'TCA_' definitions where they
should be using 'TCA_ACT_', which is confusing for the reader, although
functionally they are equivalent.
Cc: Hangbin Liu <haliu@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcf_mirred_act() and tcf_mpls_act() can use skb_network_offset()
instead of relying on skb_mac_header().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
