IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The i.MX8MQ PCIe PHY needs 1.8V in default but can be supplied by either a
1.8V or a 3.3V regulator.
The "vph-supply" DT property tells us which external regulator supplies the
PHY. If that regulator supplies anything over 3V, enable the PHY's internal
3.3V-to-1.8V regulator.
Link: https://lore.kernel.org/r/1622771269-13844-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Define the length of the DBI registers and limit config space to its
length. This makes sure that the kernel does not access registers beyond
that point that otherwise would lead to an abort on the i.MX 6QuadPlus.
See commit 075af61c19cd ("PCI: imx6: Limit DBI register length") that
resolves a similar issue on the i.MX 6Quad PCIe.
Link: https://lore.kernel.org/r/1613789388-2495-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
When devm_ioremap_resource() fails, __devm_ioremap_resource() prints an
error message including the device name, failure cause, and possibly
resource information.
Remove the error message from imx6_pcie_probe() since it's redundant.
Link: https://lore.kernel.org/r/20210511114547.5601-1-thunder.leizhen@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
The legacy PCI interrupt lines need to be enabled using PCIE_APP_IRNEN bits
13 (INTA), 14 (INTB), 15 (INTC) and 16 (INTD). The old code however was
taking (for example) "13" as raw value instead of taking BIT(13). Define
the legacy PCI interrupt bits using the BIT() macro and then use these in
PCIE_APP_IRN_INT.
Link: https://lore.kernel.org/r/20210106135540.48420-1-martin.blumenstingl@googlemail.com
Fixes: ed22aaaede44 ("PCI: dwc: intel: PCIe RC controller driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rahul Tanwar <rtanwar@maxlinear.com>
Other places in the kernel use this form, and so just
provide a common path for it.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20210623022824.308041-2-mcgrof@kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Backmerge tag 'v5.13-rc7' into drm-next
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
The interrupt affinity scheme used by this driver is incompatible with
multi-MSI as it implies moving the doorbell address to that of another MSI
group. This isn't possible for multi-MSI, as all the MSIs must have the
same doorbell address. As such it is restricted to systems with a single
CPU.
Link: https://lore.kernel.org/r/20210622152630.40842-2-sbodomerle@gmail.com
Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Commit fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
introduced multi-MSI support with a broken allocation mechanism (it failed
to reserve the proper number of bits from the inner domain). Natural
alignment of the base vector number was also not guaranteed.
Link: https://lore.kernel.org/r/20210622152630.40842-1-sbodomerle@gmail.com
Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Revert commit 4514d991d992 ("PCI: PM: Do not read power state in
pci_enable_device_flags()") that is reported to cause PCI device
initialization issues on some systems.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213481
Link: https://lore.kernel.org/linux-acpi/YNDoGICcg0V8HhpQ@eldamar.lan
Reported-by: Michael <phyre@rogers.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 4514d991d992 ("PCI: PM: Do not read power state in pci_enable_device_flags()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Link: https://lore.kernel.org/r/1620717091-108691-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDPuyMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvxgH/RKvSuRPwkJ2Jcp9
VLi5kCbqtJlYLq6tB6peSJ8otKgxkcRwC0pIY4LlYIAWYboktLQ5RKp/9nB2h2FN
aMZUMu6AI/lVJyFMI5MnKnJIUiUq+WXR3lSSlw68vwFLFdzqUZFNq+bqeiVvnIy1
yqA6naj24Tu/RbYffQoPvdSJcU2SLXRMxwD8HRGiU2d51RaFsOvsZvF+P5TVcsEV
ZmttJeER21CaI/A809eqaFmyGrUOcZZK9roZEbMwanTZOMw18biEsLu/UH4kBX01
JC4+RlGxcWjQ5YNZgChsgoOK/CHzc6ITztTntdeDWAvwZjQFzV7pCy4/3BWne3O+
5178yHM=
=o8cN
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc7' into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add check for hv_is_hyperv_initialized() at the top of
init_hv_pci_drv(), so if the pci-hyperv driver is force-loaded on non
Hyper-V platforms, the init_hv_pci_drv() will exit immediately, without
any side effects, like assignments to hvpci_block_ops, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-and-tested-by: Mohammad Alqayeem <mohammad.alqyeem@nutanix.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1621984653-1210-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=CY2S
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Clear 64-bit flag for host bridge windows below 4GB to fix a resource
allocation regression added in -rc1 (Punit Agrawal)
- Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)
- Avoid secondary bus resets on TI KeyStone C667X devices (Antti
Järvinen)
- Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)
- Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)
- Avoid broken ATS on AMD Navi14 GPU (Evan Quan)
- Trust Broadcom BCM57414 NIC to isolate functions even though it
doesn't advertise ACS support (Sriharsha Basavapatna)
- Work around AMD RS690 BIOSes that don't configure DMA above 4GB
(Mikel Rychliski)
- Fix panic during PIO transfer on Aardvark controller (Pali Rohár)
* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: aardvark: Fix kernel panic during PIO transfer
PCI: Add AMD RS690 quirk to enable 64-bit DMA
PCI: Add ACS quirk for Broadcom BCM57414 NIC
PCI: Mark AMD Navi14 GPU ATS as broken
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Mark some NVIDIA GPUs to avoid bus reset
PCI: Mark TI C667X to avoid bus reset
PCI: tegra194: Fix MCFG quirk build regressions
PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.
In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.
Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.
After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
The Broadcom BCM57414 NIC may be a multi-function device. While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00.
Further debugging shows broken ATS is related.
Disable ATS on this part. Similar issues on other devices:
a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete. It assumes the FLR is complete when a config read returns
valid data.
When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially. The VF may respond to config
reads before the firmware has completed its reset processing. If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.
Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing. Not all NIC firmware supports this feature.
[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com
Signed-off-by: Chiqijun <chiqijun@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.
This issue will be fixed in the next generation of hardware.
Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Cc: stable@vger.kernel.org
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working. Prevent bus reset for these devices. With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.
Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com
Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
caused a few build regressions:
- 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so
pcie-tegra.c can no longer be built as a module. Restore that rule.
- 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native
driver, but that's only set when the driver is built-in (for a module,
CONFIG_PCIE_TEGRA194_MODULE is defined).
The ACPI quirk is completely independent of the rest of the native
driver, so move the quirk to its own file and remove the #ifdef in the
native driver.
- 7f100744749e added symbols that are always defined but used only when
CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set:
drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=]
Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2
and ROCK Pi 4B, both based on the RK3399:
pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
"BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI
allocation code isn't smart enough to allocate it in a host bridge window
marked as 64-bit, even though this should work fine.
A DT host bridge description includes the windows from the CPU address
space to the PCI bus space. On a few architectures (microblaze, powerpc,
sparc), the DT may also describe PCI devices themselves, including their
BARs.
Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for
64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that
some DT addresses described 64-bit windows and BARs. That was a problem
because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the
driver couldn't distinguish them.
9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed
the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge
windows, which exposed the fact that the PCI allocator isn't smart enough
to put 32-bit resources in those 64-bit windows.
Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that
information.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com
Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/
Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-by: Qu Wenruo <wqu@suse.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This adds a new PCI controller driver for the Intel IXP4xx
(IX425, IXP435 etc), based on the XScale microarchitecture.
This replaces the old driver in arch/arm/mach-ixp4xx/common-pci.c
which utilized the ARM-specific BIOS32 PCI framework,
and all parameterization for such things as memory and
IO space as well as interrupt swizzling is done from the
device tree.
The plan is to phase out and delete the old driver piecemal.
The __raw_writel() and __raw_readl() are used for accessing
the PCI controller for the same reason that these accessors
are used in the timer, IRQ and GPIO drivers: the platform
will alter its address bus pattern based on whether the
system is booted in big- or little-endian mode. For this
reason all register on IXP4xx must always be accessed in
native (CPU) endianness.
This driver supports 64MB of PCI memory space, but not the
indirect access of 1GB that is available in the old driver.
We can address that later if and only if there are users
that need all 1GB of PCI address space. Krzysztof reports
having to use indirect MMIO only once for a VGA card. There
is work ongoing for general indirect MMIO. (In practice
the indirect MMIO is performed by writing address and
writing and reading values into/from a controller
register.)
Tested by booting the NSLU2, attaching a USB stick, mounting
and browsing the drive.
Link: https://lore.kernel.org/linux-arm-kernel/m37edwuv8m.fsf@t19.piap.pl/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Attempting to boot 32-bit ARM kernels under QEMU's 3.x virt models fails
when we have more than 512M of RAM in the model as we run out of vmalloc
space for the PCI ECAM regions. This failure will be silent when running
libvirt, as the console in that situation is a PCI device.
In this configuration, the kernel maps the whole ECAM, which QEMU sets up
for 256 buses, even when maybe only seven buses are in use. Each bus uses
1M of ECAM space, and ioremap() adds an additional guard page between
allocations. The kernel vmap allocator will align these regions to 512K,
resulting in each mapping eating 1.5M of vmalloc space. This means we need
384M of vmalloc space just to map all of these, which is very wasteful of
resources.
Fix this by only mapping the ECAM for buses we are going to be using. In
my setups, this is around seven buses in most guests, which is 10.5M of
vmalloc space - way smaller than the 384M that would otherwise be required.
This also means that the kernel can boot without forcing extra RAM into
highmem with the vmalloc= argument, or decreasing the virtual RAM available
to the guest.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/E1lhCAV-0002yb-50@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon
an error and attempts to re-enable it when instructed by the DPC driver.
A slot which is both DPC- and hotplug-capable is currently powered off by
pciehp once DPC is triggered (due to the link change) and powered back up
on successful recovery. That's undesirable, the slot should remain powered
so the hotplugged device remains bound to its driver. DPC notifies the
driver of the error and of successful recovery in pcie_do_recovery() and
the driver may then restore the device to working state.
Moreover, Sinan points out that turning off slot power by pciehp may foil
recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm
reset. Sathyanarayanan reports extended delays or failure in link
retraining by DPC if pciehp brings down the slot.
Fix by detecting whether a Link Down event is caused by DPC and awaiting
recovery if so. On successful recovery, ignore both the Link Down and the
subsequent Link Up event.
Afterwards, check whether the link is down to detect surprise-removal or
another DPC event immediately after DPC recovery. Ensure that the
corresponding DLLSC event is not ignored by synthesizing it and invoking
irq_wake_thread() to trigger a re-run of pciehp_ist().
The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and
dpc_handler(), race against each other. If pciehp is faster than DPC, it
will wait until DPC recovery completes.
Recovery consists of two steps: The first step (waiting for link
disablement) is recognizable by pciehp through a set DPC Trigger Status
bit. The second step (waiting for link retraining) is recognizable through
a newly introduced PCI_DPC_RECOVERING flag.
If DPC is faster than pciehp, neither of the two flags will be set and
pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag.
The flag is zero if DPC didn't occur at all, hence DLLSC events are not
ignored by default.
pciehp waits up to 4 seconds before assuming that DPC recovery failed and
bringing down the slot. This timeout is not taken from the spec (it
doesn't mandate one) but based on a report from Yicong Yang that DPC may
take a bit more than 3 seconds on HiSilicon's Kunpeng platform.
The timeout is necessary because the DPC Trigger Status bit may never
clear: On Root Ports which support RP Extensions for DPC, the DPC driver
polls the DPC RP Busy bit for up to 1 second before giving up on DPC
recovery. Without the timeout, pciehp would then wait indefinitely for DPC
to complete.
This commit draws inspiration from previous attempts to synchronize DPC
with pciehp:
By Sinan Kaya, August 2018:
https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/
By Ethan Zhao, October 2020:
https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/
By Kuppuswamy Sathyanarayanan, March 2021:
https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/
Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de
Reported-by: Sinan Kaya <okaya@kernel.org>
Reported-by: Ethan Zhao <haifeng.zhao@intel.com>
Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
Merge __calc_map_type_and_dist() and calc_map_type_and_dist_warn() into
calc_map_type_and_dist() to simplify the code a bit. This now means we add
the devfn strings to the acs_buf unconditionally even if the buffer is not
printed, but that is not a lot of overhead and keeps the code much simpler.
Link: https://lore.kernel.org/r/20210614055310.3960791-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into usb-next
We want the usb fixes in here as well, and this resolves some merge
issues with:
drivers/usb/dwc3/debugfs.c
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to use upstream_bridge_distance_warn() from a dma_map function, it
must not sleep. However, pci_get_slot() takes the pci_bus_sem so it might
sleep.
In order to avoid this, try to get the host bridge's device from the first
element in the device list. It should be impossible for the host bridge's
device to go away while references are held on child devices, so the first
element should not be able to change and, thus, this should be safe.
Introduce a static function called pci_host_bridge_dev() to obtain the host
bridge's root device.
Link: https://lore.kernel.org/r/20210610160609.28447-7-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All callers of pci_p2pdma_map_type() have a struct dev_pgmap and a struct
device (of the client doing the DMA transfer). Thus move the conversion to
struct pci_devs for the provider and client into this function.
Link: https://lore.kernel.org/r/20210610160609.28447-6-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If the host bridge is not in the whitelist print a warning in the
calc_map_type_and_dist_warn() path detailing the vendor and device IDs that
would need to be added to the whitelist.
Suggested-by: Don Dutile <ddutile@redhat.com>
Link: https://lore.kernel.org/r/20210610160609.28447-5-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of using an int for the return value of this function, use the
correct enum pci_p2pdma_map_type.
Link: https://lore.kernel.org/r/20210610160609.28447-4-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In order to call the calc_map_type_and_dist_warn() function from a dma_map
operation, the function must not sleep. The only reason it sleeps is to
allocate memory for the seq_buf to print a verbose warning telling the user
how to disable ACS for that path.
Instead of allocating the memory with kmalloc(), allocate a smaller buffer
on the stack. A 128 byte buffer is enough to print 10 PCI device names. A
system with 10 bridge ports between two devices that have ACS enabled would
be unusually large, so this should still be a reasonable limit.
This also cleans up the awkward (and broken) return with -ENOMEM which
contradicts the return type and the caller was not prepared for.
Link: https://lore.kernel.org/r/20210610160609.28447-3-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The function upstream_bridge_distance() has evolved such that its name is
no longer entirely reflective of what the function does. It not only
calculates the distance between two peers but also calculates how the DMA
addresses for those two peers should be mapped.
Rename it to calc_map_type_and_dist() and rework the documentation to
better describe the two pieces of information the function returns.
[bhelgaas: tweak comment wording]
Link: https://lore.kernel.org/r/20210610160609.28447-2-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Be more verbose to disambiguate the error case when trying to configure
SR-IOV with no driver bound vs. a driver that does not implement the
.sriov_configure() callback.
Link: https://lore.kernel.org/r/20210327175140.682708-1-mdf@kernel.org
Reported-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767
Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Previously, when the value of the "devspec" sysfs attribute was read from
the user space there was no newline present, and utilities such as "cat"
wouldn't display the result of the read correctly.
Append a newline character in the show() function to match other "devspec"
attributes.
Link: https://lore.kernel.org/r/20210603000112.703037-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
The value of the "resource_alignment" can be specified using a kernel
command-line argument ("pci=resource_alignment=") or through the
corresponding sysfs attribute under the /sys/bus/pci path.
Previously, when the value was set via the kernel command-line argument,
and then subsequently accessed through sysfs attribute, the value read back
was not correct:
# grep -oE 'pci=resource_alignment.+' /proc/cmdline
pci=resource_alignment=20@00:1f.2
# cat /sys/bus/pci/resource_alignment
20@00:1f.
This was also true when the value was set through the sysfs attribute
without including a trailing newline:
# echo -n 20@00:1f.2 > /sys/bus/pci/resource_alignment
# cat /sys/bus/pci/resource_alignment
20@00:1f.
When it was set through the sysfs attribute *including* a newline,
reading it back worked as intended:
# echo 20@00:1f.2 > /sys/bus/pci/resource_alignment
# cat /sys/bus/pci/resource_alignment
20@00:1f.2
To fix this inconsistency, append a trailing newline in the show() function
and strip the trailing line in the store() function if one is present.
Also, allow for the value previously set using either a command-line
argument or through the sysfs object to be cleared at run-time.
[bhelgaas: fold in kfree fix from
https://lore.kernel.org/linux-pci/20210604133230.983956-4-kw@linux.com]
Fixes: e499081da1a2 ("PCI: Force trailing new line to resource_alignment_param in sysfs")
Link: https://lore.kernel.org/r/20210603000112.703037-4-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
The sysfs_emit() and sysfs_emit_at() functions were introduced to make
it less ambiguous which function is preferred when writing to the output
buffer in a device attribute's "show" callback [1].
Convert the PCI sysfs object "show" functions from sprintf(), snprintf()
and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the
latter is aware of the PAGE_SIZE buffer and correctly returns the number
of bytes written into the buffer.
No functional change intended.
[1] Documentation/filesystems/sysfs.rst
Related commit: ad025f8e46f3 ("PCI/sysfs: Use sysfs_emit() and
sysfs_emit_at() in "show" functions").
Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
scnprintf() returns the number of bytes written into the buffer. Change
dsm_label_utf16s_to_utf8s() to do the same. Rely on those values instead
of using strlen() to compute the buffer length.
No functional change intended.
[bhelgaas: reorder patch in series, len++ to include newline added by
dsm_label_utf16s_to_utf8s(), commit log]
Link: https://lore.kernel.org/r/20210603000112.703037-3-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
"utf16s_to_utf8s(..., buf, PAGE_SIZE)" puts up to PAGE_SIZE bytes into
"buf" and returns the number of bytes it actually put there. If it wrote
PAGE_SIZE bytes, the newline added by dsm_label_utf16s_to_utf8s() would
overrun "buf".
Reduce the size available for utf16s_to_utf8s() to use so there is always
space for the newline.
[bhelgaas: reorder patch in series, commit log]
Fixes: 6058989bad05 ("PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs")
Link: https://lore.kernel.org/r/20210603000112.703037-7-kw@linux.com
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
With the new method of flushing/stopping the workqueue before doing bus
removal, the old mechanism of using refcount and wait for completion
is no longer needed. Remove those dead code.
Link: https://lore.kernel.org/r/1620806809-31055-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
[lorenzo.pieralisi@arm.com: Reworded subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
On removing the device, any work item (hv_pci_devices_present() or
hv_pci_eject_device()) scheduled on workqueue hbus->wq may still be running
and race with hv_pci_remove().
This can happen because the host may send PCI_EJECT or PCI_BUS_RELATIONS(2)
and decide to rescind the channel immediately after that.
Fix this by flushing/destroying the workqueue of hbus before doing hbus remove.
Link: https://lore.kernel.org/r/1620806800-30983-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Link: https://lore.kernel.org/r/20210511122453.6052-1-thunder.leizhen@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
PCI_IOSIZE is defined in mach-loongson64/spaces.h, so change the name
of the PCI_* macros in pci-ftpci100.c to use FTPCI_* so that they are
more localized and won't conflict with other drivers or arches.
../drivers/pci/controller/pci-ftpci100.c:37: warning: "PCI_IOSIZE" redefined
37 | #define PCI_IOSIZE 0x00
|
In file included from ../arch/mips/include/asm/addrspace.h:13,
... from ../drivers/pci/controller/pci-ftpci100.c:15:
arch/mips/include/asm/mach-loongson64/spaces.h:11: note: this is the location of the previous definition
11 | #define PCI_IOSIZE SZ_16M
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210517234117.3660-1-rdunlap@infradead.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
The PCIe host controller driver for Layerscape 4th generation SoC was
added in the commit d29ad70a813b ("PCI: mobiveil: Add PCIe Gen4 RC
driver for Layerscape SoCs").
At this time two static functions were introduced that appear to
currently have no users. Since nothing is using neither of these
functions at the moment they can be safely removed.
This resolves the following build time warnings:
drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c:45:19: warning: unused function 'ls_pcie_g4_lut_readl' [-Wunused-function]
drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c:50:20: warning: unused function 'ls_pcie_g4_lut_writel' [-Wunused-function]
Link: https://lore.kernel.org/r/20210510023032.3063932-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The struct event_descs does not have any users outside the
pcie-microchip-host.c file, and has no previous declaration,
thus it can be made static.
This resolves the following sparse warning:
drivers/pci/controller/pcie-microchip-host.c:352:3: warning: symbol 'event_descs' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210509041932.560340-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit 62795041418d ("PCI: enhance physical slot debug information") added
a debug print on releasing the PCI slot and another message on destroying
it. There is however no debug print on releasing the PCI device structure
itself and even with closely looking at the kernel log during hotplug
testing, I overlooked several missing pci_dev_put() calls for way too long.
Add a debug print in pci_release_dev() making it much easier to spot when
the PCI device structure is not released when it is supposed to be.
Link: https://lore.kernel.org/r/20210311132312.2882425-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We use format domain🚌slot.function when printing PCI device. Use
consistent format in AER messages.
[bhelgaas: also drop "AER recover:" prefix since we already have an "AER:"
prefix from pr_fmt()]
Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
A PCI device is "external_facing" if it's a Root Port with the ACPI
"ExternalFacingPort" property or if it has the DT "external-facing"
property. We consider everything downstream from such a device to
be removable by user.
We're mainly concerned with consumer platforms with user accessible
Thunderbolt ports that are vulnerable to DMA attacks, and we expect those
ports to be identified by firmware as "ExternalFacingPort". Devices in
traditional hotplug slots can technically be removed, but the expectation
is that unless the port is marked with "ExternalFacingPort", such devices
are less accessible to user / may not be removed by end user, and thus not
exposed as "removable" to userspace.
This can be used to implement userspace policies tailored for
user removable devices. Eg usage:
https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2591812https://chromium-review.googlesource.com/c/chromiumos/platform2/+/2795038
(code uses such an attribute to remove external PCI devices or disable
features on them as needed by the policy desired)
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rajat Jain <rajatja@google.com>
Link: https://lore.kernel.org/r/20210524171812.18095-2-rajatja@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare
its reliance on MSI domains"), platforms that rely on the "msi-map"
device-tree property don't get MSIs anymore.
On the Arm Fast Model for example [1], the host bridge doesn't have a
"msi-parent" property since it doesn't itself generate MSIs, and so doesn't
get a MSI domain. It has an "msi-map" property instead to describe MSI
controllers of child devices. As a result, due to the new msi_domain check
in pci_register_host_bridge(), the whole bus gets PCI_BUS_FLAGS_NO_MSI.
Check whether the root complex has an "msi-map" property before giving
up on MSIs.
[1] arch/arm64/boot/dts/arm/fvp-base-revc.dts
Fixes: 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains")
Link: https://lore.kernel.org/r/20210510173129.750496-1-jean-philippe@linaro.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
