IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.
Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).
Example:
$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
(the [...] are edits to shorten the commit message).
Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
selftest harness uses various exit codes to signal test
results. Avoid calling exit() directly, otherwise tests
may get broken by harness refactoring (like the commit
under Fixes). SKIP() will instruct the harness that the
test shouldn't run, it used to not be the case, but that
has been fixed. So just return, no need to exit.
Note that for hmm-tests this actually changes the result
from pass to skip. Which seems fair, the test is skipped,
after all.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/05f7bf89-04a5-4b65-bf59-c19456aeb1f0@sirena.org.uk
Fixes: a724707976b0 ("selftests: kselftest_harness: use KSFT_* exit codes")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240304233621.646054-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:
struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };
static __naked void iter_limit_bug_cb(void)
{
switch (bpf_get_prandom_u32()) {
case 1: ctx->a = 42; break;
case 2: ctx->b = 42; break;
default: ctx->c = 42; break;
}
}
int iter_limit_bug(struct __sk_buff *skb)
{
struct iter_limit_bug_ctx ctx = { 7, 7, 7 };
bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r1 /= 0;":::"r1");
return 0;
}
The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222154121.6991-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It seems some shells linked to /bin/sh don't have consistent behavior
with error codes on execution failures. Explicitly use /bin/bash so that
"not found" errors are correctly generated. Repeating the comment from
the test:
/*
* Execute as a long pathname relative to "/". If this is a script,
* the interpreter will launch but fail to open the script because its
* name ("/dev/fd/5/xxx....") is bigger than PATH_MAX.
*
* The failure code is usually 127 (POSIX: "If a command is not found,
* the exit status shall be 127."), but some systems give 126 (POSIX:
* "If the command name is found, but it is not an executable utility,
* the exit status shall be 126."), so allow either.
*/
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/02c8bf8e-1934-44ab-a886-e065b37366a7@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-kselftest@vger.kernel.org
Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.
Fixes: 8a89efd43423 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f350ce ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
With the removal of the ARCH_NR_GPIOS, the number of available GPIOs
is effectively unlimited, causing the gpio-mockup module load failure
test that overflowed the number of GPIOs to unexpectedly succeed, and
so fail.
The test is no longer relevant so remove it.
Promote the "no lines defined" test so there is still one load
failure test in the basic set.
Fixes: 7b61212f2a07 ("gpiolib: Get rid of ARCH_NR_GPIOS")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://lore.kernel.org/linux-gpio/ZC6OHBjdwBdT4sSb@xpf.sh.intel.com/
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This test is userspace code, but uses some kernel headers via symlinks,
and mocks other headers, in order to test load_unaligned_zeropad().
Currently the test fails to build with:
In file included from load_unaligned_zeropad.c:26:
word-at-a-time.h:7:10: fatal error: linux/bitops.h: No such file or directory
7 | #include <linux/bitops.h>
This is due to the recent changes to the kernel headers.
Fix it by symlinking the new wordpart.h, and creating an empty stub for
bitops.h which is all that's needed.
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 66a5c40f60f5 ("kernel.h: removed REPEAT_BYTE from kernel.h")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20240305125644.3315910-1-mpe@ellerman.id.au
Signed-off-by: Kees Cook <keescook@chromium.org>
These tests generate various IPv6 flows, encapsulate them in GRE packets
and check that the encapsulated packets are distributed between the
available nexthops according to the configured weights.
Unlike the corresponding IPv4 tests, these tests sometimes fail in the
netdev CI because of large discrepancies between the expected and
measured ratios [1]. This can be explained by the fact that the IPv4
tests generate about 3,600 different flows whereas the IPv6 tests only
generate about 784 different flows (potentially by mistake).
Fix by aligning the IPv6 tests to the IPv4 ones and increase the number
of generated flows.
[1]
[...]
# TEST: ping [ OK ]
# INFO: Running IPv6 over GRE over IPv4 multipath tests
# TEST: ECMP [FAIL]
# Too large discrepancy between expected and measured ratios
# INFO: Expected ratio 1.00 Measured ratio 1.18
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests sometimes fail on the netdev CI because the expected number
of packets is larger than expected [1].
Make the tests more robust by specifically matching on VXLAN
encapsulated packets and allowing up to five stray packets instead of
just two.
[1]
[...]
# TEST: VXLAN: ECN encap: 0x00->0x00 [FAIL]
# v1: Expected to capture 10 packets, got 13.
# TEST: VXLAN: ECN encap: 0x01->0x01 [ OK ]
# TEST: VXLAN: ECN encap: 0x02->0x02 [ OK ]
# TEST: VXLAN: ECN encap: 0x03->0x02 [ OK ]
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ageing time used by the test is too short for debug kernels and
results in entries being aged out prematurely [1].
Fix by increasing the ageing time.
[1]
# ./vxlan_bridge_1q.sh
[...]
INFO: learning vlan 10
TEST: VXLAN: flood before learning [ OK ]
TEST: VXLAN: show learned FDB entry [ OK ]
TEST: VXLAN: learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
RTNETLINK answers: No such file or directory
TEST: VXLAN: deletion of learned FDB entry [ OK ]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
swp4: Expected to capture 0 packets, got 10.
TEST: VXLAN: learning toggling on bridge port [ OK ]
[...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test configures a policer with a rate of 80Mbps and expects to
measure a rate close to it. This is a too high rate for debug kernels,
causing the test to fail [1].
Fix by reducing the rate to 10Mbps.
[1]
# ./tc_police.sh
TEST: police on rx [FAIL]
Expected rate 76.2Mbps, got 29.6Mbps, which is -61% off. Required accuracy is +-10%.
TEST: police on tx [FAIL]
Expected rate 76.2Mbps, got 30.4Mbps, which is -60% off. Required accuracy is +-10%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The various multipath tests use mausezahn to generate different flows
and check how they are distributed between the available nexthops. The
tool is currently invoked with an hard coded transmission delay of 1 ms.
This is unnecessary when the tests are run with veth pairs and
needlessly prolongs the tests.
Parametrize this delay and default it to 0 us. It can be overridden
using the forwarding.config file. On my system, this reduces the run
time of router_multipath.sh by 93%.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The multipath tests currently test both the L3 and L4 multipath hash
policies for IPv6, but only the L4 policy for IPv4. The reason is mostly
historic: When the initial multipath test was added
(router_multipath.sh) the IPv6 L4 policy did not exist and was later
added to the test. The other multipath tests copied this pattern
although there is little value in testing both policies.
Align the IPv4 and IPv6 tests and only test the L4 policy. On my system,
this reduces the run time of router_multipath.sh by 89% because of the
repeated ping6 invocations to randomize the flow label.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240304095612.462900-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PARTIAL_NODE slab_state has gone with SLAB removed, so just
remove it.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the dependsOn test check for all the mirred blockcast tests.
It will prevent the issue reported by LKFT which happens when an older
iproute2 is used to run the current tdc.
Tests are skipped if the dependsOn check fails.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20240229143825.1373550-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes :
- "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh
- "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh
Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228120701.422264-1-pvkumar5749404@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both debugfs.
[ziy@nvidia.com: fix issue discovered with NFS]
Link: https://lkml.kernel.org/r/262E4DAA-4A78-4328-B745-1355AE356A07@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-9-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: misc fixes".
Misc fixes for DAMON selftets on behalf of the original authors.
This patch (of 2):
This patch resolves a spelling error in the test log, preventing potential
confusion.
It is submitted as part of my application to the "Linux Kernel Bug Fixing
Spring Unpaid 2024" mentorship program of the Linux Foundation.
Link: https://lore.kernel.org/r/20240204122523.14160-1-vincenzo.mezzela@gmail.com
Link: https://lkml.kernel.org/r/20240221211148.46522-2-sj@kernel.org
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In current ping-pong design, xdp_hw_metadata will wait until the packet
transmission completely done, then only start to receive the next packet.
The current sleep interval is 10ms, which is unnecessary large. Typically,
a NIC does not need such a long time to transmit a packet. Furthermore,
during this 10ms sleep time, the app is unable to receive incoming packets.
Therefore, this commit reduce sleep interval to 10us, so that
xdp_hw_metadata is able to support periodic packets with shorter interval.
10us * 500 = 5ms should be enough for packet transmission and status
retrieval.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20240303083225.1184165-2-yoong.siang.song@intel.com
Settle on three "flavors" of uprobe/uretprobe, installed on different
kinds of instruction: nop, push, and ret. All three are testing
different internal code paths emulating or single-stepping instructions,
so are interesting to compare and benchmark separately.
To ensure `push rbp` instruction we ensure that uprobe_target_push() is
not a leaf function by calling (global __weak) noop function and
returning something afterwards (if we don't do that, compiler will just
do a tail call optimization).
Also, we need to make sure that compiler isn't skipping frame pointer
generation, so let's add `-fno-omit-frame-pointers` to Makefile.
Just to give an idea of where we currently stand in terms of relative
performance of different uprobe/uretprobe cases vs a cheap syscall
(getpgid()) baseline, here are results from my local machine:
$ benchs/run_bench_uprobes.sh
base : 1.561 ± 0.020M/s
uprobe-nop : 0.947 ± 0.007M/s
uprobe-push : 0.951 ± 0.004M/s
uprobe-ret : 0.443 ± 0.007M/s
uretprobe-nop : 0.471 ± 0.013M/s
uretprobe-push : 0.483 ± 0.004M/s
uretprobe-ret : 0.306 ± 0.007M/s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240301214551.1686095-1-andrii@kernel.org
In the function btf__load_vmlinux_btf, the debug message incorrectly
refers to 'path' instead of 'sysfs_btf_path'.
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240302062218.3587-1-peterchenshen@gmail.com
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl get $id
This patch adds token argument for it to support userspace PM:
pm_nl_ctl get $id token $token
If 'token $token' is passed to get_addr(), copy it into the kernel netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.
This helper will be used for userspace dump addresses tests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:
pm_nl_ctl dump
This patch adds token argument for it to support userspace PM:
pm_nl_ctl dump token $token
If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bbaa ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec3b ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc568f ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
