36287 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Waiman Long
|
28ce0e70ec |
locking/qrwlock: Cleanup queued_write_lock_slowpath()
Make the code more readable by replacing the atomic_cmpxchg_acquire() by an equivalent atomic_try_cmpxchg_acquire() and change atomic_add() to atomic_or(). For architectures that use qrwlock, I do not find one that has an atomic_add() defined but not an atomic_or(). I guess it should be fine by changing atomic_add() to atomic_or(). Note that the previous use of atomic_add() isn't wrong as only one writer that is the wait_lock owner can set the waiting flag and the flag will be cleared later on when acquiring the write lock. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20210426185017.19815-1-longman@redhat.com |
||
Arnd Bergmann
|
1139aeb1c5 |
smp: Fix smp_call_function_single_async prototype
As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct call_single_data"), the smp code prefers 32-byte aligned call_single_data objects for performance reasons, but the block layer includes an instance of this structure in the main 'struct request' that is more senstive to size than to performance here, see 4ccafe032005 ("block: unalign call_single_data in struct request"). The result is a violation of the calling conventions that clang correctly points out: block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch] smp_call_function_single_async(cpu, &rq->csd); It does seem that the usage of the call_single_data without cache line alignment should still be allowed by the smp code, so just change the function prototype so it accepts both, but leave the default alignment unchanged for the other users. This seems better to me than adding a local hack to shut up an otherwise correct warning in the caller. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org |
||
Odin Ugedal
|
0258bdfaff |
sched/fair: Fix unfairness caused by missing load decay
This fixes an issue where old load on a cfs_rq is not properly decayed, resulting in strange behavior where fairness can decrease drastically. Real workloads with equally weighted control groups have ended up getting a respective 99% and 1%(!!) of cpu time. When an idle task is attached to a cfs_rq by attaching a pid to a cgroup, the old load of the task is attached to the new cfs_rq and sched_entity by attach_entity_cfs_rq. If the task is then moved to another cpu (and therefore cfs_rq) before being enqueued/woken up, the load will be moved to cfs_rq->removed from the sched_entity. Such a move will happen when enforcing a cpuset on the task (eg. via a cgroup) that force it to move. The load will however not be removed from the task_group itself, making it look like there is a constant load on that cfs_rq. This causes the vruntime of tasks on other sibling cfs_rq's to increase faster than they are supposed to; causing severe fairness issues. If no other task is started on the given cfs_rq, and due to the cpuset it would not happen, this load would never be properly unloaded. With this patch the load will be properly removed inside update_blocked_averages. This also applies to tasks moved to the fair scheduling class and moved to another cpu, and this path will also fix that. For fork, the entity is queued right away, so this problem does not affect that. This applies to cases where the new process is the first in the cfs_rq, issue introduced 3d30544f0212 ("sched/fair: Apply more PELT fixes"), and when there has previously been load on the cgroup but the cgroup was removed from the leaflist due to having null PELT load, indroduced in 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path"). For a simple cgroup hierarchy (as seen below) with two equally weighted groups, that in theory should get 50/50 of cpu time each, it often leads to a load of 60/40 or 70/30. parent/ cg-1/ cpu.weight: 100 cpuset.cpus: 1 cg-2/ cpu.weight: 100 cpuset.cpus: 1 If the hierarchy is deeper (as seen below), while keeping cg-1 and cg-2 equally weighted, they should still get a 50/50 balance of cpu time. This however sometimes results in a balance of 10/90 or 1/99(!!) between the task groups. $ ps u -C stress USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 18568 1.1 0.0 3684 100 pts/12 R+ 13:36 0:00 stress --cpu 1 root 18580 99.3 0.0 3684 100 pts/12 R+ 13:36 0:09 stress --cpu 1 parent/ cg-1/ cpu.weight: 100 sub-group/ cpu.weight: 1 cpuset.cpus: 1 cg-2/ cpu.weight: 100 sub-group/ cpu.weight: 10000 cpuset.cpus: 1 This can be reproduced by attaching an idle process to a cgroup and moving it to a given cpuset before it wakes up. The issue is evident in many (if not most) container runtimes, and has been reproduced with both crun and runc (and therefore docker and all its "derivatives"), and with both cgroup v1 and v2. Fixes: 3d30544f0212 ("sched/fair: Apply more PELT fixes") Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path") Signed-off-by: Odin Ugedal <odin@uged.al> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210501141950.23622-2-odin@uged.al |
||
Quentin Perret
|
6d2f8909a5 |
sched: Fix out-of-bound access in uclamp
Util-clamp places tasks in different buckets based on their clamp values for performance reasons. However, the size of buckets is currently computed using a rounding division, which can lead to an off-by-one error in some configurations. For instance, with 20 buckets, the bucket size will be 1024/20=51. A task with a clamp of 1024 will be mapped to bucket id 1024/51=20. Sadly, correct indexes are in range [0,19], hence leading to an out of bound memory access. Clamp the bucket id to fix the issue. Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcounting") Suggested-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20210430151412.160913-1-qperret@google.com |
||
Johannes Weiner
|
d583d360a6 |
psi: Fix psi state corruption when schedule() races with cgroup move
4117cebf1a9f ("psi: Optimize task switch inside shared cgroups") introduced a race condition that corrupts internal psi state. This manifests as kernel warnings, sometimes followed by bogusly high IO pressure: psi: task underflow! cpu=1 t=2 tasks=[0 0 0 0] clear=c set=0 (schedule() decreasing RUNNING and ONCPU, both of which are 0) psi: incosistent task state! task=2412744:systemd cpu=17 psi_flags=e clear=3 set=0 (cgroup_move_task() clearing MEMSTALL and IOWAIT, but task is MEMSTALL | RUNNING | ONCPU) What the offending commit does is batch the two psi callbacks in schedule() to reduce the number of cgroup tree updates. When prev is deactivated and removed from the runqueue, nothing is done in psi at first; when the task switch completes, TSK_RUNNING and TSK_IOWAIT are updated along with TSK_ONCPU. However, the deactivation and the task switch inside schedule() aren't atomic: pick_next_task() may drop the rq lock for load balancing. When this happens, cgroup_move_task() can run after the task has been physically dequeued, but the psi updates are still pending. Since it looks at the task's scheduler state, it doesn't move everything to the new cgroup that the task switch that follows is about to clear from it. cgroup_move_task() will leak the TSK_RUNNING count in the old cgroup, and psi_sched_switch() will underflow it in the new cgroup. A similar thing can happen for iowait. TSK_IOWAIT is usually set when a p->in_iowait task is dequeued, but again this update is deferred to the switch. cgroup_move_task() can see an unqueued p->in_iowait task and move a non-existent TSK_IOWAIT. This results in the inconsistent task state warning, as well as a counter underflow that will result in permanent IO ghost pressure being reported. Fix this bug by making cgroup_move_task() use task->psi_flags instead of looking at the potentially mismatching scheduler state. [ We used the scheduler state historically in order to not rely on task->psi_flags for anything but debugging. But that ship has sailed anyway, and this is simpler and more robust. We previously already batched TSK_ONCPU clearing with the TSK_RUNNING update inside the deactivation call from schedule(). But that ordering was safe and didn't result in TSK_ONCPU corruption: unlike most places in the scheduler, cgroup_move_task() only checked task_current() and handled TSK_ONCPU if the task was still queued. ] Fixes: 4117cebf1a9f ("psi: Optimize task switch inside shared cgroups") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210503174917.38579-1-hannes@cmpxchg.org |
||
Linus Torvalds
|
8404c9fbc8 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "The remainder of the main mm/ queue. 143 patches. Subsystems affected by this patch series (all mm): pagecache, hugetlb, userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap, kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and kfence" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits) kfence: use power-efficient work queue to run delayed work kfence: maximize allocation wait timeout duration kfence: await for allocation using wait_event kfence: zero guard page after out-of-bounds access mm/process_vm_access.c: remove duplicate include mm/mempool: minor coding style tweaks mm/highmem.c: fix coding style issue btrfs: use memzero_page() instead of open coded kmap pattern iov_iter: lift memzero_page() to highmem.h mm/zsmalloc: use BUG_ON instead of if condition followed by BUG. mm/zswap.c: switch from strlcpy to strscpy arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE mm,memory_hotplug: add kernel boot option to enable memmap_on_memory acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported mm,memory_hotplug: allocate memmap from the added memory range mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count() mm,memory_hotplug: relax fully spanned sections check drivers/base/memory: introduce memory_block_{online,offline} mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove ... |
||
Linus Torvalds
|
5d6a1b84e0 |
gpio updates for v5.13
- new driver for the Realtek Otto GPIO controller - ACPI support for gpio-mpc8xxx - edge event support for gpio-sch (+ Kconfig fixes) - Kconfig improvements in gpio-ich - fixes to older issues in gpio-mockup - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055 - improve the GPIO aggregator code by using more generic interfaces instead of reimplementing them in the driver - convert the DT bindings for gpio-74x164 to yaml - documentation improvements - a slew of other minor fixes and improvements to GPIO drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmCSptQACgkQEacuoBRx 13KFDQ/+NOkRQuJarKAvGuR5LJ81CbBfH72/m9gJMB9gwNBS7g+esNWrZG/riWVM BVs2fxlC52+ppN1rV7iMEaXSyREULrcidgoZ0H7X2vsI9MRkk/fjzpTRwbJbSLPo C+IXBAHHfuUC1FQNtQk1cuZXl7PToHd/A14KZIkLOBxLjQddpSo7TTkv23Ub1BA7 Se13EaDrBJxzfmLR900kAKCFDyM8VRnIt7/euhmlTcXCxOg/lCbGZ4eBpEZasUs5 UA9PQX0dnnwtMER4b4TQPIdQ345A0l+xqALr8X2leqQ0AqsWQ7kveMwfSRlXI5Hr zyuXRiA0e84h6HXIHE59kXqoa4LJVnW59hgjYx0D+fcZ5gNVnaRg/4LsztJmMd/f uVAZazE4jd81Cr/kbtpEu5mfGPjOVBeUCeDnKtRovnaSMi24HwqvHqIauI9sM8fN locTCYOdLfvxucAJHZ/BWe8yl301/+IlwiHiN+7+/3ljYB+HjAH42rdPwFpP1BWJ bpgd90KxLHezeqsv83U9CTTrVK9ZM2yisVunQUo3bVi6Ztxl2Juv16P5Qs0IJW2F mly+KNTa4M6NKCdP6luEnazmifFIsnreCzTMfPoa9w+eu/vpIw6lZDFpDAbePV+A 8XJ99TxV1Bk9kUjvKiEi2qx6uW7f5k8JIwvRvJWhRXkEzufJyUI= =5vLN -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: - new driver for the Realtek Otto GPIO controller - ACPI support for gpio-mpc8xxx - edge event support for gpio-sch (+ Kconfig fixes) - Kconfig improvements in gpio-ich - fixes to older issues in gpio-mockup - ACPI quirk for ignoring EC wakeups on Dell Venue 10 Pro 5055 - improve the GPIO aggregator code by using more generic interfaces instead of reimplementing them in the driver - convert the DT bindings for gpio-74x164 to yaml - documentation improvements - a slew of other minor fixes and improvements to GPIO drivers * tag 'gpio-updates-for-v5.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (34 commits) dt-bindings: gpio: add YAML description for rockchip,gpio-bank gpio: mxs: remove useless function dt-bindings: gpio: fairchild,74hc595: Convert to json-schema gpio: it87: remove unused code gpio: 104-dio-48e: Fix coding style issues gpio: mpc8xxx: Add ACPI support gpio: ich: Switch to be dependent on LPC_ICH gpio: sch: Drop MFD_CORE selection gpio: sch: depends on LPC_SCH gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055 gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events gpio: sch: Add edge event support gpio: aggregator: Replace custom get_arg() with a generic next_arg() lib/cmdline: Export next_arg() for being used in modules gpio: omap: Use device_get_match_data() helper gpio: Add Realtek Otto GPIO support dt-bindings: gpio: Binding for Realtek Otto GPIO docs: kernel-parameters: Add gpio_mockup_named_lines docs: kernel-parameters: Move gpio-mockup for alphabetic order lib: bitmap: provide devm_bitmap_alloc() and devm_bitmap_zalloc() ... |
||
Pintu Kumar
|
ef49843841 |
mm/compaction: remove unused variable sysctl_compact_memory
The sysctl_compact_memory is mostly unused in mm/compaction.c It just acts as a place holder for sysctl to store .data. But the .data itself is not needed here. So we can get ride of this variable completely and make .data as NULL. This will also eliminate the extern declaration from header file. No functionality is broken or changed this way. Link: https://lkml.kernel.org/r/1614852224-14671-1-git-send-email-pintu@codeaurora.org Signed-off-by: Pintu Kumar <pintu@codeaurora.org> Signed-off-by: Pintu Agarwal <pintu.ping@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Steven Rostedt (VMware)
|
8c9af478c0 |
ftrace: Handle commands when closing set_ftrace_filter file
# echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter will cause switch_mm to stop tracing by the traceoff command. # echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter does nothing. The reason is that the parsing in the write function only processes commands if it finished parsing (there is white space written after the command). That's to handle: write(fd, "switch_mm:", 10); write(fd, "traceoff", 8); cases, where the command is broken over multiple writes. The problem is if the file descriptor is closed, then the write call is not processed, and the command needs to be processed in the release code. The release code can handle matching of functions, but does not handle commands. Cc: stable@vger.kernel.org Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
74d6790cda |
Merge branch 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk: "Christoph Hellwig has taken a cleaver and trimmed off the not-needed code and nicely folded duplicate code in the generic framework. This lays the groundwork for more work to add extra DMA-backend-ish in the future. Along with that some bug-fixes to make this a nice working package" * 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't override user specified size in swiotlb_adjust_size swiotlb: Fix the type of index swiotlb: Make SWIOTLB_NO_FORCE perform no allocation ARM: Qualify enabling of swiotlb_init() swiotlb: remove swiotlb_nr_tbl swiotlb: dynamically allocate io_tlb_default_mem swiotlb: move global variables into a new io_tlb_mem structure xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup xen-swiotlb: split xen_swiotlb_init swiotlb: lift the double initialization protection from xen-swiotlb xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs xen-swiotlb: remove xen_set_nslabs xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer swiotlb: split swiotlb_tbl_sync_single swiotlb: move orig addr and size validation into swiotlb_bounce swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single powerpc/svm: stop using io_tlb_start |
||
Linus Torvalds
|
954b720705 |
dma-mapping updates for Linux 5.13:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda) - fix a copyright noice (Hao Fang) - add an unlikely annotation to dma_mapping_error (Heiner Kallweit) - remove a pointless empty line (Wang Qing) - add support for multi-pages map/unmap bencharking (Xiang Chen) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmCQ/foLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYMKLRAAyNxmtSSgU9FlzcCWIwLlOj5IMDR0bWkxMYr0oQOo e/e3ZLv5N6bF2tkLRE8YLy14LlmGYDdpV/VsuObsRMEJXUYs+wbWJOLuNFRZnkqH WjrXgCz0ijhynmxwkQCc7lsTZbMvwq0f2Jf+v0OWZ4D2v/raem3ESs2NW/Ld8lAe uPYK0mXywCPe0eqnRbJL53hah2y0PP+NKATPj18BtI32evPQcSL4g0r//VxPXb7G q4cT6D51xqo280h+fW2DqODJeQQsWb6tYrWDdg7y/JkGZU6aOKTCyCLrZ4Dz+MqA 7wb0PII3ldZxb0Z4FP9Ij/Tt8r+FuWS6uT8epwzFFuURrVj3M7Uuw2bKHJuFmHI4 R6wJGy6I5tIbgbg7EtqLr6LhwGtbdhhd5ehlXDA+x4VcXdQ3+9aE3IvGS0YGCon8 lDQH0EyC3FIAW6BJbBf1NySM3jtySSxrn2GMD3d70gOiS6O0Xiktj6jBY68cXYzS zCCSSY7KCZm65KbcDe71dv/RIgZePAIBGQJPPmSsRcKgnBXB+AVuUl0AoZu3yGwJ hY49eP55XX9Vm746GBwdwciuVDaTDScDzDtrw/GN3FQMBKrwtJs9MXTzbJHsdWVt G4p5qXa5VwH2xl1GsuRLAItKEglXzsX5GDZ0IvwjcbWlZokVhBlMOCv1ZfJRVkwc 0c0= =DJoy -----END PGP SIGNATURE----- Merge tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda) - fix a copyright notice (Hao Fang) - add an unlikely annotation to dma_mapping_error (Heiner Kallweit) - remove a pointless empty line (Wang Qing) - add support for multi-pages map/unmap bencharking (Xiang Chen) * tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add unlikely hint to error path in dma_mapping_error dma-mapping: benchmark: Add support for multi-pages map/unmap dma-mapping: benchmark: use the correct HiSilicon copyright dma-mapping: remove a pointless empty line in dma_alloc_coherent media: uvcvideo: Use dma_alloc_noncontiguous API dma-iommu: implement ->alloc_noncontiguous dma-iommu: refactor iommu_dma_alloc_remap dma-mapping: add a dma_alloc_noncontiguous API dma-mapping: refactor dma_{alloc,free}_pages dma-mapping: add a dma_mmap_pages helper |
||
Linus Torvalds
|
9b1f61d5d7 |
tracing updates for 5.13
New feature: The "func-no-repeats" option in tracefs/options directory. When set the function tracer will detect if the current function being traced is the same as the previous one, and instead of recording it, it will keep track of the number of times that the function is repeated in a row. And when another function is recorded, it will write a new event that shows the function that repeated, the number of times it repeated and the time stamp of when the last repeated function occurred. Enhancements: In order to implement the above "func-no-repeats" option, the ring buffer timestamp can now give the accurate timestamp of the event as it is being recorded, instead of having to record an absolute timestamp for all events. This helps the histogram code which no longer needs to waste ring buffer space. New validation logic to make sure all trace events that access dereferenced pointers do so in a safe way, and will warn otherwise. Fixes: No longer limit the PIDs of tasks that are recorded for "saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger range. This caused the mapping of PIDs to the task names to be dropped for all tasks with a PID greater than 32768. Change trace_clock_global() to never block. This caused a deadlock. Clean ups: Typos, prototype fixes, and removing of duplicate or unused code. Better management of ftrace_page allocations. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYI/1vBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qiL0AP9EemIC5TDh2oihqLRNeUjdTu0ryEoM HRFqxozSF985twD/bfkt86KQC8rLHwxTbxQZ863bmdaC6cMGFhWiF+H/MAs= =psYt -----END PGP SIGNATURE----- Merge tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New feature: - A new "func-no-repeats" option in tracefs/options directory. When set the function tracer will detect if the current function being traced is the same as the previous one, and instead of recording it, it will keep track of the number of times that the function is repeated in a row. And when another function is recorded, it will write a new event that shows the function that repeated, the number of times it repeated and the time stamp of when the last repeated function occurred. Enhancements: - In order to implement the above "func-no-repeats" option, the ring buffer timestamp can now give the accurate timestamp of the event as it is being recorded, instead of having to record an absolute timestamp for all events. This helps the histogram code which no longer needs to waste ring buffer space. - New validation logic to make sure all trace events that access dereferenced pointers do so in a safe way, and will warn otherwise. Fixes: - No longer limit the PIDs of tasks that are recorded for "saved_cmdlines" to PID_MAX_DEFAULT (32768), as systemd now allows for a much larger range. This caused the mapping of PIDs to the task names to be dropped for all tasks with a PID greater than 32768. - Change trace_clock_global() to never block. This caused a deadlock. Clean ups: - Typos, prototype fixes, and removing of duplicate or unused code. - Better management of ftrace_page allocations" * tag 'trace-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (32 commits) tracing: Restructure trace_clock_global() to never block tracing: Map all PIDs to command lines ftrace: Reuse the output of the function tracer for func_repeats tracing: Add "func_no_repeats" option for function tracing tracing: Unify the logic for function tracing options tracing: Add method for recording "func_repeats" events tracing: Add "last_func_repeats" to struct trace_array tracing: Define new ftrace event "func_repeats" tracing: Define static void trace_print_time() ftrace: Simplify the calculation of page number for ftrace_page->records some more ftrace: Store the order of pages allocated in ftrace_page tracing: Remove unused argument from "ring_buffer_time_stamp() tracing: Remove duplicate struct declaration in trace_events.h tracing: Update create_system_filter() kernel-doc comment tracing: A minor cleanup for create_system_filter() kernel: trace: Mundane typo fixes in the file trace_events_filter.c tracing: Fix various typos in comments scripts/recordmcount.pl: Make vim and emacs indent the same scripts/recordmcount.pl: Make indent spacing consistent tracing: Add a verifier to check string pointers for trace events ... |
||
Linus Torvalds
|
23806a3e96 |
Merge branch 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull receive_fd update from Al Viro: "Cleanup of receive_fd mess" * 'work.file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: split receive_fd_replace from __receive_fd |
||
Daniel Borkmann
|
801c6058d1 |
bpf: Fix leakage of uninitialized bpf stack under speculation
The current implemented mechanisms to mitigate data disclosure under speculation mainly address stack and map value oob access from the speculative domain. However, Piotr discovered that uninitialized BPF stack is not protected yet, and thus old data from the kernel stack, potentially including addresses of kernel structures, could still be extracted from that 512 bytes large window. The BPF stack is special compared to map values since it's not zero initialized for every program invocation, whereas map values /are/ zero initialized upon their initial allocation and thus cannot leak any prior data in either domain. In the non-speculative domain, the verifier ensures that every stack slot read must have a prior stack slot write by the BPF program to avoid such data leaking issue. However, this is not enough: for example, when the pointer arithmetic operation moves the stack pointer from the last valid stack offset to the first valid offset, the sanitation logic allows for any intermediate offsets during speculative execution, which could then be used to extract any restricted stack content via side-channel. Given for unprivileged stack pointer arithmetic the use of unknown but bounded scalars is generally forbidden, we can simply turn the register-based arithmetic operation into an immediate-based arithmetic operation without the need for masking. This also gives the benefit of reducing the needed instructions for the operation. Given after the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask"), the aux->alu_limit already holds the final immediate value for the offset register with the known scalar. Thus, a simple mov of the immediate to AX register with using AX as the source for the original instruction is sufficient and possible now in this case. Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> |
||
Daniel Borkmann
|
b9b34ddbe2 |
bpf: Fix masking negation logic upon negative dst register
The negation logic for the case where the off_reg is sitting in the dst register is not correct given then we cannot just invert the add to a sub or vice versa. As a fix, perform the final bitwise and-op unconditionally into AX from the off_reg, then move the pointer from the src to dst and finally use AX as the source for the original pointer arithmetic operation such that the inversion yields a correct result. The single non-AX mov in between is possible given constant blinding is retaining it as it's not an immediate based operation. Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> |
||
Linus Torvalds
|
17ae69aba8 |
Add Landlock, a new LSM from Mickaël Salaün <mic@linux.microsoft.com>
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEgycj0O+d1G2aycA8rZhLv9lQBTwFAmCInP4ACgkQrZhLv9lQ BTza0g//dTeb9woC9H7qlEhK4l9yk62lTss60Q8X7m7ZSNfdL4tiEbi64SgK+iOW OOegbrOEb8Kzh4KJJYmVlVZ5YUWyH4szgmee1wnylBdsWiWaPLPF3Cflz77apy6T TiiBsJd7rRE29FKheaMt34B41BMh8QHESN+DzjzJWsFoi/uNxjgSs2W16XuSupKu bpRmB1pYNXMlrkzz7taL05jndZYE5arVriqlxgAsuLOFOp/ER7zecrjImdCM/4kL W6ej0R1fz2Geh6CsLBJVE+bKWSQ82q5a4xZEkSYuQHXgZV5eywE5UKu8ssQcRgQA VmGUY5k73rfY9Ofupf2gCaf/JSJNXKO/8Xjg0zAdklKtmgFjtna5Tyg9I90j7zn+ 5swSpKuRpilN8MQH+6GWAnfqQlNoviTOpFeq3LwBtNVVOh08cOg6lko/bmebBC+R TeQPACKS0Q0gCDPm9RYoU1pMUuYgfOwVfVRZK1prgi2Co7ZBUMOvYbNoKYoPIydr ENBYljlU1OYwbzgR2nE+24fvhU8xdNOVG1xXYPAEHShu+p7dLIWRLhl8UCtRQpSR 1ofeVaJjgjrp29O+1OIQjB2kwCaRdfv/Gq1mztE/VlMU/r++E62OEzcH0aS+mnrg yzfyUdI8IFv1q6FGT9yNSifWUWxQPmOKuC8kXsKYfqfJsFwKmHM= =uCN4 -----END PGP SIGNATURE----- Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull Landlock LSM from James Morris: "Add Landlock, a new LSM from Mickaël Salaün. Briefly, Landlock provides for unprivileged application sandboxing. From Mickaël's cover letter: "The goal of Landlock is to enable to restrict ambient rights (e.g. global filesystem access) for a set of processes. Because Landlock is a stackable LSM [1], it makes possible to create safe security sandboxes as new security layers in addition to the existing system-wide access-controls. This kind of sandbox is expected to help mitigate the security impact of bugs or unexpected/malicious behaviors in user-space applications. Landlock empowers any process, including unprivileged ones, to securely restrict themselves. Landlock is inspired by seccomp-bpf but instead of filtering syscalls and their raw arguments, a Landlock rule can restrict the use of kernel objects like file hierarchies, according to the kernel semantic. Landlock also takes inspiration from other OS sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD Pledge/Unveil. In this current form, Landlock misses some access-control features. This enables to minimize this patch series and ease review. This series still addresses multiple use cases, especially with the combined use of seccomp-bpf: applications with built-in sandboxing, init systems, security sandbox tools and security-oriented APIs [2]" The cover letter and v34 posting is here: https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/ See also: https://landlock.io/ This code has had extensive design discussion and review over several years" Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1] Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2] * tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: landlock: Enable user space to infer supported features landlock: Add user and kernel documentation samples/landlock: Add a sandbox manager example selftests/landlock: Add user space tests landlock: Add syscall implementations arch: Wire up Landlock syscalls fs,security: Add sb_delete hook landlock: Support filesystem access-control LSM: Infrastructure management of the superblock landlock: Add ptrace restrictions landlock: Set up the security framework and manage credentials landlock: Add ruleset and domain management landlock: Add object management |
||
Linus Torvalds
|
152d32aa84 |
ARM:
- Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - Some selftests improvements -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+ Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY +2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ== =AXUi -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ... |
||
Masahiro Yamada
|
9009b45581 |
.gitignore: prefix local generated files with a slash
The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com> |
||
Masahiro Yamada
|
46b41d5dd8 |
kbuild: update config_data.gz only when the content of .config is changed
If the timestamp of the .config file is updated, config_data.gz is regenerated, then vmlinux is re-linked. This occurs even if the content of the .config has not changed at all. This issue was mitigated by commit 67424f61f813 ("kconfig: do not write .config if the content is the same"); Kconfig does not update the .config when it ends up with the identical configuration. The issue is remaining when the .config is created by *_defconfig with some config fragment(s) applied on top. This is typical for powerpc and mips, where several *_defconfig targets are constructed by using merge_config.sh. One workaround is to have the copy of the .config. The filechk rule updates the copy, kernel/config_data, by checking the content instead of the timestamp. With this commit, the second run with the same configuration avoids the needless rebuilds. $ make ARCH=mips defconfig all [ snip ] $ make ARCH=mips defconfig all *** Default configuration is based on target '32r2el_defconfig' Using ./arch/mips/configs/generic_defconfig as base Merging arch/mips/configs/generic/32r2.config Merging arch/mips/configs/generic/el.config Merging ./arch/mips/configs/generic/board-boston.config Merging ./arch/mips/configs/generic/board-ni169445.config Merging ./arch/mips/configs/generic/board-ocelot.config Merging ./arch/mips/configs/generic/board-ranchu.config Merging ./arch/mips/configs/generic/board-sead-3.config Merging ./arch/mips/configs/generic/board-xilfpga.config # # configuration written to .config # SYNC include/config/auto.conf CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CHK include/generated/autoksyms.h Reported-by: Elliot Berman <eberman@codeaurora.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Masahiro Yamada
|
1fca376603 |
kernel/.gitgnore: remove stale timeconst.h and hz.bc
timeconst.h and hz.bc used to exist in kernel/. Commit 5cee96459726 ("time/timers: Move all time(r) related files into kernel/time") moved them to kernel/time/. Commit 0a227985d4a9 ("time: Move timeconst.h into include/generated") moved timeconst.h to include/generated/ and removed hz.bc . Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Linus Torvalds
|
d42f323a7d |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "A few misc subsystems and some of MM. 175 patches. Subsystems affected by this patch series: ia64, kbuild, scripts, sh, ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub, kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap, mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization, pagealloc, and memory-failure)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits) mm/memory-failure: unnecessary amount of unmapping mm/mmzone.h: fix existing kernel-doc comments and link them to core-api mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1 net: page_pool: use alloc_pages_bulk in refill code path net: page_pool: refactor dma_map into own function page_pool_dma_map SUNRPC: refresh rq_pages using a bulk page allocator SUNRPC: set rq_page_end differently mm/page_alloc: inline __rmqueue_pcplist mm/page_alloc: optimize code layout for __alloc_pages_bulk mm/page_alloc: add an array-based interface to the bulk page allocator mm/page_alloc: add a bulk page allocator mm/page_alloc: rename alloced to allocated mm/page_alloc: duplicate include linux/vmalloc.h mm, page_alloc: avoid page_to_pfn() in move_freepages() mm/Kconfig: remove default DISCONTIGMEM_MANUAL mm: page_alloc: dump migrate-failed pages mm/mempolicy: fix mpol_misplaced kernel-doc mm/mempolicy: rewrite alloc_pages_vma documentation mm/mempolicy: rewrite alloc_pages documentation mm/mempolicy: rename alloc_pages_current to alloc_pages ... |
||
Linus Torvalds
|
65ec0a7d24 |
This is the bulk of the pin control changes for the v5.13 kernel cycle
Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmCL5sAACgkQQRCzN7AZ XXNX5RAAtdPvDrPzzWdeqNLyodnJu/SyeA2xbmsvywrSvgpSx3FojFW9AXY/sr7w RuhGGA5KhnrovwiabRKoZ0d0lC/JtKdx5g2o9ePFHDy+7BzFnVacBjL38UftSKy0 4QpDNJ3zock/XTUgJdaJEsbHhP/N4fOF/SbLpguYzGz7JpybNrZ+2M73yeQSL6uE yuhn/AgFMLgWS47nSAH91Yt387+XCEfB75nftXyFSN9GpQ9i3VixWsG3Um/Stoma aR7IIknvHdpCrOHH1IKohYcdlOkE7Wh2wHXSJVv26M49Ri5KSXu17lsUknebQ/oq UeDYdd/2q/wFjxdEbG2tqinEYHs3e1RPmatVesgyibtYHGwjnSFo/G6UtG4948ii 1exwBi+0fw58YWLu/z4bhnNtZx6VsOev6mJ5GF7pyYzGIJy3r5J/9KCDzOJEoLom YTVmgZRjzJuH/i0rPgyg3lSxlP/pdvdk1YUMlIYN1zWdPnRqj7/q+qaxPOkltqD+ 20NFkvhQuuq+dLn4jtNK9xr2+vIKxIRPClT3D/lAihEPC5MUaFw/+y/V7c1hEJfS d1dh5DwgHK7i55/lqLFaXeNNYsmY/SiFecoB8xyFnOJFsHlSHe/6NfjmRhOMUn6V IX2GG4CBAzaheIWtN/ub/DcQ1vwA2n9hO5WX+Y3CXkIxXUFPmJY= =QrEn -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ... |
||
Linus Torvalds
|
65c61de9d0 |
Summary of modules changes for the 5.13 merge window:
- Fix an age old bug involving jump_calls and static_labels when CONFIG_MODULE_UNLOAD=n. When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so normally the __exit sections of a module are not loaded at all. However, dynamic code patching (jump_label, static_call, alternatives) can have sites in __exit sections even if __exit is never executed. Reported by Peter Zijlstra: "Alternatives, jump_labels and static_call all can have relocations into __exit code. Not loading it at all would be BAD." Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n, and discard them after init. Signed-off-by: Jessica Yu <jeyu@kernel.org> -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAmCKVqUQHGpleXVAa2Vy bmVsLm9yZwAKCRDARX44zjvBcjzUD/454XSMUia0ZuTBhkR21gjY9yz7nfed5R4c 3ChyXEc6yfPPfO9OQRcVp+9UB/AGHvZM/+6mWHMpjbwv8mBW6gQ4xtvbVkVpQ0vB QXoqJZvILOcPtnY8ViTncoo3P+79ZsMWFniIRbCaZinmF017+peISRnlo+WppA+2 NOOdmK1/oWIbZhxaurlqfzgR1UCDw31wK+djWu6+Ajy3YCvNWkDA4bVlXthTIrLe 1r752f8eQw2wjVFi+sgN7wGW6JHCRRISYF01yy/VUsFTGRq6DL87nB6icNa8we+t Rs+PwWJsrb19VhRECegWVK6qJNfqpLR2QYyuu3JA6KM/YtuDJQcM5yHllt2UazjT daZQx6GKxIrNC9c8ttkllc+W6l2c3LyTyN0H8RnbUzpZ/8ZiQzXuIXLzEFCgd/7L 5CByLgRTZ1n8c90K03xGN7px3ZOv4ugW4z4PdXPhfFmM6hl8u+GSk1tIBtXRG+VL uaRgToJF77vbL5WkIKd6keHY+mC8v2zu9CL20rJlmPC12/aXkU5O0RIp4ptYYL0I AB5UDyT5ciQiwNks/W8x7RNkAyPd22NRBQ1Bs6VYRTjJpjgiW3EcHUlXlFErnJGV LUNYVlQ5e7TxF87dTl78BUq3NHUJax/kOsMamWlcCrbgxXZkpdvutjHzsndZ9Qy+ edbT0BWgyw== =zme0 -----END PGP SIGNATURE----- Merge tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Fix an age old bug involving jump_calls and static_labels when CONFIG_MODULE_UNLOAD=n. When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so normally the __exit sections of a module are not loaded at all. However, dynamic code patching (jump_label, static_call, alternatives) can have sites in __exit sections even if __exit is never executed. Reported by Peter Zijlstra: 'Alternatives, jump_labels and static_call all can have relocations into __exit code. Not loading it at all would be BAD.' Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n, and discard them after init" * tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD |
||
Zqiang
|
e2b5bcf9f5 |
irq_work: record irq_work_queue() call stack
Add the irq_work_queue() call stack into the KASAN auxiliary stack in order to improve KASAN reports. this will let us know where the irq work be queued. Link: https://lkml.kernel.org/r/20210331063202.28770-1-qiang.zhang@windriver.com Signed-off-by: Zqiang <qiang.zhang@windriver.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Cc: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Walter Wu
|
23f61f0fe1 |
kasan: record task_work_add() call stack
Why record task_work_add() call stack? Syzbot reports many use-after-free issues for task_work, see [1]. After seeing the free stack and the current auxiliary stack, we think they are useless, we don't know where the work was registered. This work may be the free call stack, so we miss the root cause and don't solve the use-after-free. Add the task_work_add() call stack into the KASAN auxiliary stack in order to improve KASAN reports. It helps programmers solve use-after-free issues. [1]: https://groups.google.com/g/syzkaller-bugs/search?q=kasan%20use-after-free%20task_work_run Link: https://lkml.kernel.org/r/20210316024410.19967-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
e82b9b3086 |
kernel/dma: remove unnecessary unmap_kernel_range
vunmap will remove ptes. Link: https://lkml.kernel.org/r/20210322021806.892164-3-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Cédric Le Goater <clg@kaod.org> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
dc26532aed |
cgroup: rstat: punt root-level optimization to individual controllers
Current users of the rstat code can source root-level statistics from the native counters of their respective subsystem, allowing them to forego aggregation at the root level. This optimization is currently implemented inside the generic rstat code, which doesn't track the root cgroup and doesn't invoke the subsystem flush callbacks on it. However, the memory controller cannot do this optimization, because cgroup1 breaks out memory specifically for the local level, including at the root level. In preparation for the memory controller switching to rstat, move the optimization from rstat core to the controllers. Afterwards, rstat will always track the root cgroup for changes and invoke the subsystem callbacks on it; and it's up to the subsystem to special-case and skip aggregation of the root cgroup if it can source this information through other, cheaper means. This is the case for the io controller and the cgroup base stats. In their respective flush callbacks, check whether the parent is the root cgroup, and if so, skip the unnecessary upward propagation. The extra cost of tracking the root cgroup is negligible: on stat changes, we actually remove a branch that checks for the root. The queueing for a flush touches only per-cpu data, and only the first stat change since a flush requires a (per-cpu) lock. Link: https://lkml.kernel.org/r/20210209163304.77088-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
a7df69b81a |
cgroup: rstat: support cgroup1
Rstat currently only supports the default hierarchy in cgroup2. In order to replace memcg's private stats infrastructure - used in both cgroup1 and cgroup2 - with rstat, the latter needs to support cgroup1. The initialization and destruction callbacks for regular cgroups are already in place. Remove the cgroup_on_dfl() guards to handle cgroup1. The initialization of the root cgroup is currently hardcoded to only handle cgrp_dfl_root.cgrp. Move those callbacks to cgroup_setup_root() and cgroup_destroy_root() to handle the default root as well as the various cgroup1 roots we may set up during mounting. The linking of css to cgroups happens in code shared between cgroup1 and cgroup2 as well. Simply remove the cgroup_on_dfl() guard. Linkage of the root css to the root cgroup is a bit trickier: per default, the root css of a subsystem controller belongs to the default hierarchy (i.e. the cgroup2 root). When a controller is mounted in its cgroup1 version, the root css is stolen and moved to the cgroup1 root; on unmount, the css moves back to the default hierarchy. Annotate rebind_subsystems() to move the root css linkage along between roots. Link: https://lkml.kernel.org/r/20210209163304.77088-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Muchun Song
|
27faca83a7 |
mm: memcontrol: fix kernel stack account
For simplification commit 991e7673859e ("mm: memcontrol: account kernel stack per node") changed the per zone vmalloc backed stack pages accounting to per node. By doing that we have lost a certain precision because those pages might live in different NUMA nodes. In the end NR_KERNEL_STACK_KB exported to the userspace might be over estimated on some nodes while underestimated on others. But this is not a real world problem, just a problem found by reading the code. So there is no actual data to showing how much impact it has on users. This doesn't impose any real problem to correctnes of the kernel behavior as the counter is not used for any internal processing but it can cause some confusion to the userspace. Address the problem by accounting each vmalloc backing page to its own node. Link: https://lkml.kernel.org/r/20210303151843.81156-1-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
9bf3bc949f |
watchdog: cleanup handling of false positives
Commit d6ad3e286d2c ("softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume") introduced touch_softlockup_watchdog_sync(). It solved a problem when the watchdog was touched in an atomic context, the timer callback was proceed right after releasing interrupts, and the local clock has not been updated yet. In this case, sched_clock_tick() was called in watchdog_timer_fn() before updating the timer. So far so good. Later commit 5d1c0f4a80a6 ("watchdog: add check for suspended vm in softlockup detector") added two kvm_check_and_clear_guest_paused() calls. They touch the watchdog when the guest has been sleeping. The code makes my head spin around. Scenario 1: + guest did sleep: + PVCLOCK_GUEST_STOPPED is set + 1st watchdog_timer_fn() invocation: + the watchdog is not touched yet + is_softlockup() returns too big delay + kvm_check_and_clear_guest_paused(): + clear PVCLOCK_GUEST_STOPPED + call touch_softlockup_watchdog_sync() + set SOFTLOCKUP_DELAY_REPORT + set softlockup_touch_sync + return from the timer callback + 2nd watchdog_timer_fn() invocation: + call sched_clock_tick() even though it is not needed. The timer callback was invoked again only because the clock has already been updated in the meantime. + call kvm_check_and_clear_guest_paused() that does nothing because PVCLOCK_GUEST_STOPPED has been cleared already. + call update_report_ts() and return. This is fine. Except that sched_clock_tick() might allow to set it already during the 1st invocation. Scenario 2: + guest did sleep + 1st watchdog_timer_fn() invocation + same as in 1st scenario + guest did sleep again: + set PVCLOCK_GUEST_STOPPED again + 2nd watchdog_timer_fn() invocation + SOFTLOCKUP_DELAY_REPORT is set from 1st invocation + call sched_clock_tick() + call kvm_check_and_clear_guest_paused() + clear PVCLOCK_GUEST_STOPPED + call touch_softlockup_watchdog_sync() + set SOFTLOCKUP_DELAY_REPORT + set softlockup_touch_sync + call update_report_ts() (set real timestamp immediately) + return from the timer callback + 3rd watchdog_timer_fn() invocation + timestamp is set from 2nd invocation + softlockup_touch_sync is set but not checked because the real timestamp is already set Make the code more straightforward: 1. Always call kvm_check_and_clear_guest_paused() at the very beginning to handle PVCLOCK_GUEST_STOPPED. It touches the watchdog when the quest did sleep. 2. Handle the situation when the watchdog has been touched (SOFTLOCKUP_DELAY_REPORT is set). Call sched_clock_tick() when touch_*sync() variant was used. It makes sure that the timestamp will be up to date even when it has been touched in atomic context or quest did sleep. As a result, kvm_check_and_clear_guest_paused() is called on a single location. And the right timestamp is always set when returning from the timer callback. Link: https://lkml.kernel.org/r/20210311122130.6788-7-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
9f113bf760 |
watchdog: fix barriers when printing backtraces from all CPUs
Any parallel softlockup reports are skipped when one CPU is already printing backtraces from all CPUs. The exclusive rights are synchronized using one bit in soft_lockup_nmi_warn. There is also one memory barrier that does not make much sense. Use two barriers on the right location to prevent mixing two reports. [pmladek@suse.com: use bit lock operations to prevent multiple soft-lockup reports] Link: https://lkml.kernel.org/r/YFSVsLGVWMXTvlbk@alley Link: https://lkml.kernel.org/r/20210311122130.6788-6-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
1bc503cb4a |
watchdog/softlockup: remove logic that tried to prevent repeated reports
The softlockup detector does some gymnastic with the variable soft_watchdog_warn. It was added by the commit 58687acba59266735ad ("lockup_detector: Combine nmi_watchdog and softlockup detector"). The purpose is not completely clear. There are the following clues. They describe the situation how it looked after the above mentioned commit: 1. The variable was checked with a comment "only warn once". 2. The variable was set when softlockup was reported. It was cleared only when the CPU was not longer in the softlockup state. 3. watchdog_touch_ts was not explicitly updated when the softlockup was reported. Without this variable, the report would normally be printed again during every following watchdog_timer_fn() invocation. The logic has got even more tangled up by the commit ed235875e2ca98 ("kernel/watchdog.c: print traces for all cpus on lockup detection"). After this commit, soft_watchdog_warn is set only when softlockup_all_cpu_backtrace is enabled. But multiple reports from all CPUs are prevented by a new variable soft_lockup_nmi_warn. Conclusion: The variable probably never worked as intended. In each case, it has not worked last many years because the softlockup was reported repeatedly after the full period defined by watchdog_thresh. The reason is that watchdog gets touched in many known slow paths, for example, in printk_stack_address(). This code is called also when printing the softlockup report. It means that the watchdog timestamp gets updated after each report. Solution: Simply remove the logic. People want the periodic report anyway. Link: https://lkml.kernel.org/r/20210311122130.6788-5-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
fef06efc2e |
watchdog/softlockup: report the overall time of softlockups
The softlockup detector currently shows the time spent since the last report. As a result it is not clear whether a CPU is infinitely hogged by a single task or if it is a repeated event. The situation can be simulated with a simply busy loop: while (true) cpu_relax(); The softlockup detector produces: [ 168.277520] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865] [ 196.277604] watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [cat:4865] [ 236.277522] watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [cat:4865] But it should be, something like: [ 480.372418] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [cat:4943] [ 508.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 52s! [cat:4943] [ 548.372359] watchdog: BUG: soft lockup - CPU#2 stuck for 89s! [cat:4943] [ 576.372351] watchdog: BUG: soft lockup - CPU#2 stuck for 115s! [cat:4943] For the better output, add an additional timestamp of the last report. Only this timestamp is reset when the watchdog is intentionally touched from slow code paths or when printing the report. Link: https://lkml.kernel.org/r/20210311122130.6788-4-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
c9ad17c991 |
watchdog: explicitly update timestamp when reporting softlockup
The softlockup situation might stay for a long time or even forever. When it happens, the softlockup debug messages are printed in regular intervals defined by get_softlockup_thresh(). There is a mystery. The repeated message is printed after the full interval that is defined by get_softlockup_thresh(). But the timer callback is called more often as defined by sample_period. The code looks like the soflockup should get reported in every sample_period when it was once behind the thresh. It works only by chance. The watchdog is touched when printing the stall report, for example, in printk_stack_address(). Make the behavior clear and predictable by explicitly updating the timestamp in watchdog_timer_fn() when the report gets printed. Link: https://lkml.kernel.org/r/20210311122130.6788-3-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Petr Mladek
|
7c0012f522 |
watchdog: rename __touch_watchdog() to a better descriptive name
Patch series "watchdog/softlockup: Report overall time and some cleanup", v2. I dug deep into the softlockup watchdog history when time permitted this year. And reworked the patchset that fixed timestamps and cleaned up the code[2]. I split it into very small steps and did even more code clean up. The result looks quite strightforward and I am pretty confident with the changes. [1] v2: https://lore.kernel.org/r/20201210160038.31441-1-pmladek@suse.com [2] v1: https://lore.kernel.org/r/20191024114928.15377-1-pmladek@suse.com This patch (of 6): There are many touch_*watchdog() functions. They are called in situations where the watchdog could report false positives or create unnecessary noise. For example, when CPU is entering idle mode, a virtual machine is stopped, or a lot of messages are printed in the atomic context. These functions set SOFTLOCKUP_RESET instead of a real timestamp. It allows to call them even in a context where jiffies might be outdated. For example, in an atomic context. The real timestamp is set by __touch_watchdog() that is called from the watchdog timer callback. Rename this callback to update_touch_ts(). It better describes the effect and clearly distinguish is from the other touch_*watchdog() functions. Another motivation is that two timestamps are going to be used. One will be used for the total softlockup time. The other will be used to measure time since the last report. The new function name will help to distinguish which timestamp is being updated. Link: https://lkml.kernel.org/r/20210311122130.6788-1-pmladek@suse.com Link: https://lkml.kernel.org/r/20210311122130.6788-2-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Laurence Oberman <loberman@redhat.com> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Steven Rostedt (VMware)
|
aafe104aa9 |
tracing: Restructure trace_clock_global() to never block
It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home Cc: stable@vger.kernel.org Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
8ca5297e7e |
Kconfig updates for v5.13
- Change 'option defconfig' to the environment variable KCONFIG_DEFCONFIG_LIST - Refactor tinyconfig without using allnoconfig_y - Remove 'option allnoconfig_y' syntax - Change 'option modules' to 'modules' - Do not use /boot/config-* etc. as base config for cross-compilation - Fix a search bug in nconf - Various code cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmCKTy8VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGLFkQAJFaFORoOIGvkErYkTNv64LpDZsB ck7xV6gAUB0iSfv6x5mKfbZRWllc0GMr0dNY2hKs0iazvrvm3OKheLNR6zQ7OwI4 aPd46lD7Dpvl09iNJcAAwVkwuqAcISKKk8wBhTsdFNx6A+ouPxNPWZHics5SqT14 jw6YGkI/MJaDx74izRlDKOiBlrpq1gM9pyAud2gHyWfksxu9E2JQ2guao/UpB0I7 XmCC8HzDdMP637gvA0cMj/+thW0/6ws8ev0bwhHTNFnB1F+N5Aop1urWnwTQKIoy WatTUfvhikaZPbJUBxOA21xbmhN4NnBxICXcmsFRLxYIsaZJY1UOk5hDZ1MvptnB jnOKUH52yqWeHMvBLqdsxSxktUawg3U85v5ygtYOUUJmuyhkP5nz3095eeFXS/J6 3KZAnSfRubb2XbfZMG0YUUtVoi782Mv0OvdRbyvON/TsXFP8T1skKUtCaDaXm31Z ApjIs1xViuuTXfRqmk7vmjTn0oWIhRahnS49Wl1Ro00JH9VjBJz7N3T+rJ5naY2B GOCM2oTWh/qMW5makFCQNFEsaSr5HBsueepRhUoUOQcyJHQFuK/Cb+C4Rv2gp5ao 3QYp2x49v0c+dkEmkmOW4LwUxjKUe573D3eVLcGnq+4MYouY7XGFWFKfUKYuPgCL aqVi/QHKNZpd5Wko =+eSh -----END PGP SIGNATURE----- Merge tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - Change 'option defconfig' to the environment variable KCONFIG_DEFCONFIG_LIST - Refactor tinyconfig without using allnoconfig_y - Remove 'option allnoconfig_y' syntax - Change 'option modules' to 'modules' - Do not use /boot/config-* etc. as base config for cross-compilation - Fix a search bug in nconf - Various code cleanups * tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kconfig: refactor .gitignore kconfig: highlight xconfig 'comment' lines with '***' kconfig: highlight gconfig 'comment' lines with '***' kconfig: gconf: remove unused code kconfig: remove unused PACKAGE definition kconfig: nconf: stop endless search loops kconfig: split menu.c out of parser.y kconfig: nconf: refactor in print_in_middle() kconfig: nconf: remove meaningless wattrset() call from show_menu() kconfig: nconf: change set_config_filename() to void function kconfig: nconf: refactor attributes setup code kconfig: nconf: remove unneeded default for menu prompt kconfig: nconf: get rid of (void) casts from wattrset() calls kconfig: nconf: fix NORMAL attributes kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf() kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build kconfig: change sym_change_count to a boolean flag kconfig: nconf: fix core dump when searching in empty menu kconfig: lxdialog: A spello fix and a punctuation added kconfig: streamline_config.pl: Couple of typo fixes ... |
||
Linus Torvalds
|
b0030af53a |
Kbuild updates for v5.13
- Evaluate $(call cc-option,...) etc. only for build targets - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux - Remove unnecessary --gcc-toolchains Clang flag because the --prefix flag finds the toolchains - Do not pass Clang's --prefix flag when using the integrated as - Check the assembler version in Kconfig time - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up some dependencies in Kconfig - Fix invalid Module.symvers creation when building only modules without vmlinux - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is set, but there is no module to build - Refactor module installation Makefile - Support zstd for module compression - Convert alpha and ia64 to use generic shell scripts to generate the syscall headers - Add a new elfnote to indicate if the kernel was built with LTO, which will be used by pahole - Flatten the directory structure under include/config/ so CONFIG options and filenames match - Change the deb source package name from linux-$(KERNELRELEASE) to linux-upstream -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmCKOLUVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGdq8P/2z+saxIWGXVWt0ggavR0vimcY4e NQIKGu9uZpo/lfoC78UG8HO+XvzvPUrcRuOX+WIVr2GfScgVnweDukexUAY0/2oi 4UvqhndJ0sjEwRj8mXXJ0O+PED+OtgrqrbhkLq9wHQd/jpSD4XEWXwn1g1XVrTZu WbwP6b1G/Rnjp2lz3HKC017rPkmfsCFQB7r+hbJGKhT0rCaceheUuBvGa/XqLknr IOyaUAY76u3Gtj6fVY1rk70kQgDMF8+LJPgdSSZ/XPCvbNJQAeop36EeRNfmxGIh vQhFJRJeqy+K5MhCpdGtTGYDawlmQVn/f/99SkDw9F04S4ZL2Xnaaqw4L1QDhjTh xBlckbPvmq36F4xSqWd5kYF3iwS+LsEJROwZKFLEVDb3zMsRQPEGQM/556QmrBi2 5KXzwOYEJKuobWr1hQ3PwLumJKTPGLvGEFB3Bq2eG8LrgpOAHPI4ejC2EBu0vCez QbskP2lPlMj3MbL5iZg+6ZRlOChZ7RUrSDj6+iTeOcinmXHqQONCL6qy+um4Rfcb zUkfwTlqM9d88u6AbO2VvQMOobMjvp4bvmqi/Xv8IiTukLHco4tc8zTuySmZwSyI rd3RKYn367qWztX5YyaoGRPVmlMG7ssbRc4fkXiV13vfeZebNfVwlX/CHv9+IWwN RVnMhYBhUZR68h6z =ti9L -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Evaluate $(call cc-option,...) etc. only for build targets - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux - Remove unnecessary --gcc-toolchains Clang flag because the --prefix flag finds the toolchains - Do not pass Clang's --prefix flag when using the integrated as - Check the assembler version in Kconfig time - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up some dependencies in Kconfig - Fix invalid Module.symvers creation when building only modules without vmlinux - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is set, but there is no module to build - Refactor module installation Makefile - Support zstd for module compression - Convert alpha and ia64 to use generic shell scripts to generate the syscall headers - Add a new elfnote to indicate if the kernel was built with LTO, which will be used by pahole - Flatten the directory structure under include/config/ so CONFIG options and filenames match - Change the deb source package name from linux-$(KERNELRELEASE) to linux-upstream * tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits) kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test kbuild: deb-pkg: change the source package name to linux-upstream tools: do not include scripts/Kbuild.include kbuild: redo fake deps at include/config/*.h kbuild: remove TMPO from try-run MAINTAINERS: add pattern for dummy-tools kbuild: add an elfnote for whether vmlinux is built with lto ia64: syscalls: switch to generic syscallhdr.sh ia64: syscalls: switch to generic syscalltbl.sh alpha: syscalls: switch to generic syscallhdr.sh alpha: syscalls: switch to generic syscalltbl.sh sysctl: use min() helper for namecmp() kbuild: add support for zstd compressed modules kbuild: remove CONFIG_MODULE_COMPRESS kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst kbuild: move module strip/compression code into scripts/Makefile.modinst kbuild: refactor scripts/Makefile.modinst kbuild: rename extmod-prefix to extmod_prefix kbuild: check module name conflict for external modules as well kbuild: show the target directory for depmod log ... |
||
Linus Torvalds
|
9d31d23389 |
Networking changes for 5.13.
Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- -independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmCKFPIACgkQMUZtbf5S Irtw0g/+NA8bWdHNgG4H5rya0pv2z3IieLRmSdDfKRQQXcJpklawc5MKVVaTee/Q 5/QqgPdCsu1LAU6JXBKsKmyDDaMlQKdWuKbOqDSiAQKoMesZStTEHf9d851ZzgxA Cdb6O7BD3lBl/IN+oxNG+KcmD1LKquTPKGySq2mQtEdLO12ekAsranzmj4voKffd q9tBShpXQ7Dq77DLYfiQXVCvsizNcbbJFuxX0o9Lpb9+61ZyYAbogZSa9ypiZZwR I/9azRBtJg7UV1aD/cLuAfy66Qh7t63+rCxVazs5Os8jVO26P/jQdisnnOe/x+p9 wYEmKm3GSu0V4SAPxkWW+ooKusflCeqDoMIuooKt6kbP6BRj540veGw3Ww/m5YFr 7pLQkTSP/tSjuGQIdBE1LOP5LBO8DZeC8Kiop9V0fzAW9hFSZbEq25WW0bPj8QQO zA4Z7yWlslvxcfY2BdJX3wD8klaINkl/8fDWZFFsBdfFX2VeLtm7Xfduw34BJpvU rYT3oWr6PhtkPAKR32SUcemSfeWgIVU41eSshzRz3kez1NngBUuLlSGGSEaKbes5 pZVt6pYFFVByyf6MTHFEoQvafZfEw04JILZpo4R5V8iTHzom0kD3Py064sBiXEw2 B6t+OW4qgcxGblpFkK2lD4kR2s1TPUs0ckVO6sAy1x8q60KKKjY= =vcbA -----END PGP SIGNATURE----- Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ... |
||
Christoph Hellwig
|
dfc06b389a |
swiotlb: don't override user specified size in swiotlb_adjust_size
If the user already specified a swiotlb size on the command line, swiotlb_adjust_size should not overwrite it. Fixes: 2cbc2776efe4 ("swiotlb: remove swiotlb_nr_tbl") Reported-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
||
Linus Torvalds
|
635de956a7 |
The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB flush with the remote TLB flush. In testing this improved sysbench performance measurably by a couple of percentage points, especially if TLB-heavy security mitigations are active. - Further micro-optimizations to improve the performance of TLB flushes. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCKbNcRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hjYBAAsyNUa/gOu0g6/Cx8R86w9HtHHmm5vso/ 6nJjWj2fd2qJ9JShlddxvXEMeXtPTYabVWQkiiriFMuofk6JeKnlHm1Jzl6keABX OQFwjIFeNASPRcdXvuuYPOVWAJJdr2oL9QUr6OOK1ccQJTz/Cd0zA+VQ5YqcsCon yaWbkxELwKXpgql+qt66eAZ6Q2Y1TKXyrTW7ZgxQi0yeeWqMaEOub0/oyS7Ax1Rg qEJMwm1prb76NPzeqR/G3e4KTrDZfQ/B/KnSsz36GTJpl4eye6XqWDUgm1nAGNIc 5dbc4Vx7JtZsUOuC0AmzWb3hsDyzVcN/lQvijdZ2RsYR3gvuYGaBhKqExqV0XH6P oqaWOKWCz+LqWbsgJmxCpqkt1LZl5+VUOcfJ97WkIS7DyIPtSHTzQXbBMZqKLeat mn5UcKYB2Gi7wsUPv6VC2ChKbDqN0VT8G86XbYylGo4BE46KoZKPUNY/QWKLUPd6 0UKcVeNM2HFyf1C73p/tO/z7hzu3qLuMMnsphP6/c2pKLpdgawEXgbnVKNId1B/c NrzyhTvVaMt+Um28bBRhHONIlzPJwWcnZbdY7NqMnu+LBKQ68cL/h4FOIV/RDLNb GJLgfAr8fIw/zIpqYuFHiiMNo9wWqVtZko1MvXhGceXUL69QuzTra2XR/6aDxkPf 6gQVesetTvo= =3Cyp -----END PGP SIGNATURE----- Merge tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tlb updates from Ingo Molnar: "The x86 MM changes in this cycle were: - Implement concurrent TLB flushes, which overlaps the local TLB flush with the remote TLB flush. In testing this improved sysbench performance measurably by a couple of percentage points, especially if TLB-heavy security mitigations are active. - Further micro-optimizations to improve the performance of TLB flushes" * tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Micro-optimize smp_call_function_many_cond() smp: Inline on_each_cpu_cond() and on_each_cpu() x86/mm/tlb: Remove unnecessary uses of the inline keyword cpumask: Mark functions as pure x86/mm/tlb: Do not make is_lazy dirty for no reason x86/mm/tlb: Privatize cpu_tlbstate x86/mm/tlb: Flush remote and local TLBs concurrently x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy() x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote() smp: Run functions concurrently in smp_call_function_many_cond() |
||
Linus Torvalds
|
3644286f6c |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmCJUfIACgkQnJ2qBz9k QNkStAf8CA7beya7LZ/GGN7HzXhv2cs+IpUFhRkynLklEM0lxKsOEagLFSZxkoMD IBSRSo4odkkderqI9W/yp+9OYhOd9+BQCq4isg1Gh9Tf5xANJEpLvBAPnWVhooJs 9CrYZQY9Bdf+fF/8GHbKlrMAYm56vBCmWqyWTEtWUyPBOA12in2ZHQJmCa+5+nge zTT/B5cvuhN5K7uYhGM4YfeCU5DBmmvD4sV6YBTkQOgCU0bEF0f9R3JjHDo34a1s yqna3ypqKNRhsJVs8F+aOGRieUYxFoRqtYNHZK3qI9i07v7ndoTm5jzGN6OFlKs3 U3rF9/+cBgeESahWG6IjHIqhXGXNhg== =KjNm -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: - support for limited fanotify functionality for unpriviledged users - faster merging of fanotify events - a few smaller fsnotify improvements * tag 'fsnotify_for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: shmem: allow reporting fanotify events with file handles on tmpfs fs: introduce a wrapper uuid_to_fsid() fanotify_user: use upper_32_bits() to verify mask fanotify: support limited functionality for unprivileged users fanotify: configurable limits via sysfs fanotify: limit number of event merge attempts fsnotify: use hash table for faster events merge fanotify: mix event info and pid into merge key hash fanotify: reduce event objectid to 29-bit hash fsnotify: allow fsnotify_{peek,remove}_first_event with empty queue |
||
Linus Torvalds
|
767fcbc80f |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmCJU1UACgkQnJ2qBz9k QNk62AgAgp05OIXU/AgObb7DvSyI3ycwCV8PeWBpwD8yoDAh5x0tmT7vnJu974p6 yHdnF7rr69ZzvbNCHLJ5kRykRlUao9W7cO5fdOW1uTpL7Ic60QuJMks/NfgVTHp1 2zIQmBDerfn1/LTK8r2pPGcvtcjRcr7Ep4beN0Duw57lfVMJhjsNRPnBbXGBcp0r QzKk4/8V3DCZvOw+XNC3nto7avjvf+nU9sJmuh83546eqh0atjWivvO5aAlDOe6W rhBiLlmP0in5u2n1fYqzI1OQvtgtleyEZT2G0CrbAZn0xjmV/if9wl+3K6TOwDvR 778xDEX7sZCaO/xkB+WK3hrd15ftKg== =0kYE -----END PGP SIGNATURE----- Merge tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota, ext2, reiserfs updates from Jan Kara: - support for path (instead of device) based quotactl syscall (quotactl_path(2)) - ext2 conversion to kmap_local() - other minor cleanups & fixes * tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fs/reiserfs/journal.c: delete useless variables fs/ext2: Replace kmap() with kmap_local_page() ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry() fs/ext2/: fix misspellings using codespell tool quota: report warning limits for realtime space quotas quota: wire up quotactl_path quota: Add mountpath based quota support |
||
Linus Torvalds
|
625434dafd |
for-5.13/io_uring-2021-04-27
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmCIRBUQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjt5D/9de6zCaha6CyfIIPiU+crropQ2jPzO49cb WzcOCmdhSv0GtYlhdnIqCOo5p8mRDWJAEBU9upTDTCWOx9hwr5Ms0TCNQHxuQ/T0 4Ll+/cMsOxeTypiykfMtOG9TEmYSria2vTJKLgpyaP4ohfJa3uT7r2NZ8NK/8T4t wwbJ+jCSKewelI1l0XD8k8LBU39FS/KRgLTdfYj/rCW3PWt/ZE2eSIYjZQvMCVOC 3fIdgOOJAMQVQafz+YAeJd2E+/l5/8YcJVKpJMVtBNbqTHIjA4EsInZauy8TpBgW OzJ3I+XdF70qZM119tI/nXw3sb0e+UV0fRsIXLkOwTEBzowernrAtsEwAOP+qFKS 2YnqSKOSjMO5d5Mpkz6T0MDMloU45jph88lUH0RoShVxGa7jv+TMOL6QU1oOyxc1 +gPPbApQs9WtSZDHsTJ0xFLpol804UDQmwb38mHdzedDVSE7iip1jANkw6LEhKkJ Mlg60ZF1Z305G+cDhrbs02ZGVa+fzbrtXtLlTqZw8bNX9lBp0JLtDpzskjbnUmck 6A04nfg+Eto5GvAn+FRBuOCPridLEk2K6ygko/gwQWsYCgqkCgRuqjlIQCSZy5iu jHEFixIXKn6eACf+YzLVxSLyEQrmFyDSypbN7LvzoKJYo/loy8Q1+42nGlrVC3zi +CB1NokPng== =ZJ8L -----END PGP SIGNATURE----- Merge tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block Pull io_uring updates from Jens Axboe: - Support for multi-shot mode for POLL requests - More efficient reference counting. This is shamelessly stolen from the mm side. Even though referencing is mostly single/dual user, the 128 count was retained to keep the code the same. Maybe this should/could be made generic at some point. - Removal of the need to have a manager thread for each ring. The manager threads only job was checking and creating new io-threads as needed, instead we handle this from the queue path. - Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this thread is "just" a regular application thread, so no need to restrict use of it anymore. - Cleanup of how internal async poll data lifetime is managed. - Fix for syzbot reported crash on SQPOLL cancelation. - Make buffer registration more like file registrations, which includes flexibility in avoiding full set unregistration and re-registration. - Fix for io-wq affinity setting. - Be a bit more defensive in task->pf_io_worker setup. - Various SQPOLL fixes. - Cleanup of SQPOLL creds handling. - Improvements to in-flight request tracking. - File registration cleanups. - Tons of cleanups and little fixes * tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits) io_uring: maintain drain logic for multishot poll requests io_uring: Check current->io_uring in io_uring_cancel_sqpoll io_uring: fix NULL reg-buffer io_uring: simplify SQPOLL cancellations io_uring: fix work_exit sqpoll cancellations io_uring: Fix uninitialized variable up.resv io_uring: fix invalid error check after malloc io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker kernel: always initialize task->pf_io_worker to NULL io_uring: update sq_thread_idle after ctx deleted io_uring: add full-fledged dynamic buffers support io_uring: implement fixed buffers registration similar to fixed files io_uring: prepare fixed rw for dynanic buffers io_uring: keep table of pointers to ubufs io_uring: add generic rsrc update with tags io_uring: add IORING_REGISTER_RSRC io_uring: enumerate dynamic resources io_uring: add generic path for rsrc update io_uring: preparation for rsrc tagging io_uring: decouple CQE filling from requests ... |
||
Linus Torvalds
|
16b3d0cf5b |
Scheduler updates for this cycle are:
- Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces to a unified debugfs interface. - Signals: Allow caching one sigqueue object per task, to improve performance & latencies. - Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups. - Improve energy-aware scheduling - Improve the PELT metrics for certain workloads - Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous regressions - Add 'scheduler latency debugging': warn after long periods of pending need_resched. This is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature, or the use of the resched_latency_warn_ms=xx boot parameter. - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining balance_push() vs. hotplug holes/races - PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well - Fix/improve various load-balancing corner cases vs. capacity margins - Fix sched topology on systems with NUMA diameter of 3 or above - Fix PF_KTHREAD vs to_kthread() race - Minor rseq optimizations - Misc cleanups, optimizations, fixes and smaller updates Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJInsRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1i5XxAArh0b+fwXlkVGzTUly7HQjhU7lFbChnmF h6ToyNLi6pXoZ14VC/WoRIME+RzK3gmw9cEFaSLVPxbkbekTcyWS78kqmcg1/j2v kO/20QhXobiIxVskYfoMmqSavZ5mKhMWBqtFXkCuYfxwGylas0VVdh3AZLJ7N21G WEoFh99pVULwWnPHxM2ZQ87Ex9BkGKbsBTswxWpprCfXLqD0N2hHlABpwJP78zRf VniWFOcC7lslILCFawb7CqGgAwbgV85nDRS4QCuCKisrkFywvjJrEeu/W+h1NfhF d6ves/osNdEAM1DSALoxwEA42An8l8xh8NyJnl8JZV00LW0DM108O5/7pf5Zcryc RHV3RxA7skgezBh5uThvo60QzNK+kVMatI4qpQEHxLE52CaDl/fBu1Cgb/VUxnIl AEBfyiFbk+skHpuMFKtl30Tx3M+yJKMTzFPd4kYjHYGEDwtAcXcB3dJQW48A79i3 H3IWcDcXpk5Rjo2UZmaXdt/qlj7mP6U0xdOUq8ZK6JOC4uY9skszVGsfuNN9QQ5u 2E2YKKVrGFoQydl4C8R6A7axL2VzIJszHFZNipd8E3YOyW7PWRAkr02tOOkBTj8N dLMcNM7aPJWqEYiEIjEzGQN20pweJ1dRA29LDuOswKh+7W2bWTQFh6F2Q8Haansc RVg5PDzl+Mc= =E7mz -----END PGP SIGNATURE----- Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces to a unified debugfs interface. - Signals: Allow caching one sigqueue object per task, to improve performance & latencies. - Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups. - Improve energy-aware scheduling - Improve the PELT metrics for certain workloads - Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous regressions - Add 'scheduler latency debugging': warn after long periods of pending need_resched. This is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature, or the use of the resched_latency_warn_ms=xx boot parameter. - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining balance_push() vs. hotplug holes/races - PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well - Fix/improve various load-balancing corner cases vs. capacity margins - Fix sched topology on systems with NUMA diameter of 3 or above - Fix PF_KTHREAD vs to_kthread() race - Minor rseq optimizations - Misc cleanups, optimizations, fixes and smaller updates * tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) cpumask/hotplug: Fix cpu_dying() state tracking kthread: Fix PF_KTHREAD vs to_kthread() race sched/debug: Fix cgroup_path[] serialization sched,psi: Handle potential task count underflow bugs more gracefully sched: Warn on long periods of pending need_resched sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning sched/debug: Rename the sched_debug parameter to sched_verbose sched,fair: Alternative sched_slice() sched: Move /proc/sched_debug to debugfs sched,debug: Convert sysctl sched_domains to debugfs debugfs: Implement debugfs_create_str() sched,preempt: Move preempt_dynamic to debug.c sched: Move SCHED_DEBUG sysctl to debugfs sched: Don't make LATENCYTOP select SCHED_DEBUG sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG sched: Use cpu_dying() to fix balance_push vs hotplug-rollback cpumask: Introduce DYING mask cpumask: Make cpu_{online,possible,present,active}() inline rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs() ... |
||
Linus Torvalds
|
42dec9a936 |
Perf events changes in this cycle were:
- Improve Intel uncore PMU support: - Parse uncore 'discovery tables' - a new hardware capability enumeration method introduced on the latest Intel platforms. This table is in a well-defined PCI namespace location and is read via MMIO. It is organized in an rbtree. These uncore tables will allow the discovery of standard counter blocks, but fancier counters still need to be enumerated explicitly. - Add Alder Lake support - Improve IIO stacks to PMON mapping support on Skylake servers - Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived) cores. The CPU-side feature set is entirely symmetrical - but on the PMU side there's core type dependent PMU functionality. - Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by fixing the AUX allocation watermark logic. - Improve ring buffer allocation on NUMA systems - Put 'struct perf_event' into their separate kmem_cache pool - Add support for synchronous signals for select perf events. The immediate motivation is to support low-overhead sampling-based race detection for user-space code. The feature consists of the following main changes: - Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits inheritance of events to CLONE_THREAD. - Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec. - Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64 ::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is PERF_TYPE_BREAKPOINT. The siginfo support is adequate for breakpoints right now - but the new field can be used to introduce support for other types of metadata passed over siginfo as well. - Misc fixes, cleanups and smaller updates. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJGpERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1j9zBAAuVbG2snV6SBSdXLhQcM66N3NckOXvSY5 QjjhQcuwJQEK/NJB3266K5d8qSmdyRBsWf3GCsrmyBT67P1V28K44Pu7oCV0UDtf mpVRjEP0oR7hNsANSSgo8Fa4ZD7H5waX7dK7925Tvw8By3mMoZoddiD/84WJHhxO NDF+GRFaRj+/dpbhV8cdCoXTjYdkC36vYuZs3b9lu0tS9D/AJgsNy7TinLvO02Cs 5peP+2y29dgvCXiGBiuJtEA6JyGnX3nUJCvfOZZ/DWDc3fdduARlRrc5Aiq4n/wY UdSkw1VTZBlZ1wMSdmHQVeC5RIH3uWUtRoNqy0Yc90lBm55AQ0EENwIfWDUDC5zy USdBqWTNWKMBxlEilUIyqKPQK8LW/31TRzqy8BWKPNcZt5yP5YS1SjAJRDDjSwL/ I+OBw1vjLJamYh8oNiD5b+VLqNQba81jFASfv+HVWcULumnY6ImECCpkg289Fkpi BVR065boifJDlyENXFbvTxyMBXQsZfA+EhtxG7ju2Ni+TokBbogyCb3L2injPt9g 7jjtTOqmfad4gX1WSc+215iYZMkgECcUd9E+BfOseEjBohqlo7yNKIfYnT8mE/Xq nb7eHjyvLiE8tRtZ+7SjsujOMHv9LhWFAbSaxU/kEVzpkp0zyd6mnnslDKaaHLhz goUMOL/D0lg= =NhQ7 -----END PGP SIGNATURE----- Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event updates from Ingo Molnar: - Improve Intel uncore PMU support: - Parse uncore 'discovery tables' - a new hardware capability enumeration method introduced on the latest Intel platforms. This table is in a well-defined PCI namespace location and is read via MMIO. It is organized in an rbtree. These uncore tables will allow the discovery of standard counter blocks, but fancier counters still need to be enumerated explicitly. - Add Alder Lake support - Improve IIO stacks to PMON mapping support on Skylake servers - Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived) cores. The CPU-side feature set is entirely symmetrical - but on the PMU side there's core type dependent PMU functionality. - Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by fixing the AUX allocation watermark logic. - Improve ring buffer allocation on NUMA systems - Put 'struct perf_event' into their separate kmem_cache pool - Add support for synchronous signals for select perf events. The immediate motivation is to support low-overhead sampling-based race detection for user-space code. The feature consists of the following main changes: - Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits inheritance of events to CLONE_THREAD. - Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec. - Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64 ::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is PERF_TYPE_BREAKPOINT. The siginfo support is adequate for breakpoints right now - but the new field can be used to introduce support for other types of metadata passed over siginfo as well. - Misc fixes, cleanups and smaller updates. * tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) signal, perf: Add missing TRAP_PERF case in siginfo_layout() signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures perf/x86: Allow for 8<num_fixed_counters<16 perf/x86/rapl: Add support for Intel Alder Lake perf/x86/cstate: Add Alder Lake CPU support perf/x86/msr: Add Alder Lake CPU support perf/x86/intel/uncore: Add Alder Lake support perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE perf/x86/intel: Add Alder Lake Hybrid support perf/x86: Support filter_match callback perf/x86/intel: Add attr_update for Hybrid PMUs perf/x86: Add structures for the attributes of Hybrid PMUs perf/x86: Register hybrid PMUs perf/x86: Factor out x86_pmu_show_pmu_cap perf/x86: Remove temporary pmu assignment in event_init perf/x86/intel: Factor out intel_pmu_check_extra_regs perf/x86/intel: Factor out intel_pmu_check_event_constraints perf/x86/intel: Factor out intel_pmu_check_num_counters perf/x86: Hybrid PMU support for extra_regs perf/x86: Hybrid PMU support for event constraints ... |
||
Linus Torvalds
|
0ff0edb550 |
Locking changes for this cycle were:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of code - Futex simplifications & cleanups - Add debugging to the CSD code, to help track down a tenacious race (or hw problem) - Add lockdep_assert_not_held(), to allow code to require a lock to not be held, and propagate this into the ath10k driver - Misc LKMM documentation updates - Misc KCSAN updates: cleanups & documentation updates - Misc fixes and cleanups - Fix locktorture bugs with ww_mutexes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJDn0RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hPrRAAryS4zPnuDsfkVk0smxo7a0lK5ljbH2Xo 28QUZXOl6upnEV8dzbjwG7eAjt5ZJVI5tKIeG0PV0NUJH2nsyHwESdtULGGYuPf/ 4YUzNwZJa+nI/jeBnVsXCimLVxxnNCRdR7yOVOHm4ukEwa+YTNt1pvlYRmUd4YyH Q5cCrpb3THvLka3AAamEbqnHnAdGxHKuuHYVRkODpMQ+zrQvtN8antYsuk8kJsqM m+GZg/dVCuLEPah5k+lOACtcq/w7HCmTlxS8t4XLvD52jywFZLcCPvi1rk0+JR+k Vd9TngC09GJ4jXuDpr42YKkU9/X6qy2Es39iA/ozCvc1Alrhspx/59XmaVSuWQGo XYuEPx38Yuo/6w16haSgp0k4WSay15A4uhCTQ75VF4vli8Bqgg9PaxLyQH1uG8e2 xk8U90R7bDzLlhKYIx1Vu5Z0t7A1JtB5CJtgpcfg/zQLlzygo75fHzdAiU5fDBDm 3QQXSU2Oqzt7c5ZypioHWazARk7tL6th38KGN1gZDTm5zwifpaCtHi7sml6hhZ/4 ATH6zEPzIbXJL2UqumSli6H4ye5ORNjOu32r7YPqLI4IDbzpssfoSwfKYlQG4Tvn 4H1Ukirzni0gz5+wbleItzf2aeo1rocs4YQTnaT02j8NmUHUz4AzOHGOQFr5Tvh0 wk/P4MIoSb0= =cOOk -----END PGP SIGNATURE----- Merge tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - rtmutex cleanup & spring cleaning pass that removes ~400 lines of code - Futex simplifications & cleanups - Add debugging to the CSD code, to help track down a tenacious race (or hw problem) - Add lockdep_assert_not_held(), to allow code to require a lock to not be held, and propagate this into the ath10k driver - Misc LKMM documentation updates - Misc KCSAN updates: cleanups & documentation updates - Misc fixes and cleanups - Fix locktorture bugs with ww_mutexes * tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) kcsan: Fix printk format string static_call: Relax static_call_update() function argument type static_call: Fix unused variable warn w/o MODULE locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock() locking/rtmutex: Restrict the trylock WARN_ON() to debug locking/rtmutex: Fix misleading comment in rt_mutex_postunlock() locking/rtmutex: Consolidate the fast/slowpath invocation locking/rtmutex: Make text section and inlining consistent locking/rtmutex: Move debug functions as inlines into common header locking/rtmutex: Decrapify __rt_mutex_init() locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs locking/rtmutex: Inline chainwalk depth check locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c locking/rtmutex: Remove empty and unused debug stubs locking/rtmutex: Consolidate rt_mutex_init() locking/rtmutex: Remove output from deadlock detector locking/rtmutex: Remove rtmutex deadlock tester leftovers locking/rtmutex: Remove rt_mutex_timed_lock() MAINTAINERS: Add myself as futex reviewer locking/mutex: Remove repeated declaration ... |
||
Linus Torvalds
|
9a45da9270 |
RCU changes for this cycle were:
- Bitmap support for "N" as alias for last bit - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJCZERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hRjw/+Jkb9KvR9odPt/zqN/KPtIlburCUWgsFb 2zAlWN4uMocPAiXT2Xq58/8gqMkpyn7ZVZtL1tD8fZSvlwEr0U8Z74+/NdoQvYE+ kMXIYIuhIAGRyAupmzkriqN33iY+BSZPacX3u6ziPj57/0OZzbWVN/DAhbuvyLqG J/oL4PHCa7XAqXbf95rd5Zjs680QJ3CbTRh4nA8uHArzJmKZOaaHJ05Pxd1LpULe SJ+5p1GQnnwxd1HqmlHMDu/dW+2hE35BGykF8zi78je9OJXualDoM/6JpIYGhMNY 5qlhU55QYP1jzjuNGVZZUS4L77eS2/W7SpPAaTmMEy/SsVB59G8Kf22oNDpVaEqQ m+2ErqwaHvlkMjqnsx+JQbsOP0yCi2NZBoEPFdfk1H23E2deVlSDbxPso4Zb1oUD E12769kN+SWDytuLSOAe1PY/KXqmNUKjPZl1GDCGXL7HlCnWyggUDschTsKJa19O XXl+yCTGMUH4XAPSqavAKQbBjurqpT6i4zfooSH4TBtOHm1ExgZOUS8gglZ1JuJd q+uJdZIgS8BcGkGw/k1bYDWY5TA4Rjv3sAOKQL1PgYBl1t/yLK441mE7LI9gWOwz Crz7vlSxD6Jc2cYQeUVW0KPGt5aVd63Gd9HjpXxGkqYQSDRqYMCebHEAGagz+jj7 Nv/nOnf34Uc= =mpNt -----END PGP SIGNATURE----- Merge tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: - Support for "N" as alias for last bit in bitmap parsing library (eg using syntax like "nohz_full=2-N") - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes * tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu() rcu: Provide polling interfaces for Tiny RCU grace periods torture: Fix kvm.sh --datestamp regex check torture: Consolidate qemu-cmd duration editing into kvm-transform.sh torture: Print proper vmlinux path for kvm-again.sh runs torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment torture: Make kvm-transform.sh update jitter commands torture: Add --duration argument to kvm-again.sh torture: Add kvm-again.sh to rerun a previous torture-test torture: Create a "batches" file for build reuse torture: De-capitalize TORTURE_SUITE torture: Make upper-case-only no-dot no-slash scenario names official torture: Rename SRCU-t and SRCU-u to avoid lowercase characters torture: Remove no-mpstat error message torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs torture: Record jitter start/stop commands torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd torture: Abstract jitter.sh start/stop into scripts rcu: Provide polling interfaces for Tree RCU grace periods ... |
||
Steven Rostedt (VMware)
|
785e3c0a3a |
tracing: Map all PIDs to command lines
The default max PID is set by PID_MAX_DEFAULT, and the tracing infrastructure uses this number to map PIDs to the comm names of the tasks, such output of the trace can show names from the recorded PIDs in the ring buffer. This mapping is also exported to user space via the "saved_cmdlines" file in the tracefs directory. But currently the mapping expects the PIDs to be less than PID_MAX_DEFAULT, which is the default maximum and not the real maximum. Recently, systemd will increases the maximum value of a PID on the system, and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its comm is not recorded. This leads to the entire trace to have "<...>" as the comm name, which is pretty useless. Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead of just mapping the index to the comm, map a mask of the PID (PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the map_cmdline_to_pid array (that already exists). This bug goes back to the beginning of ftrace, but hasn't been an issue until user space started increasing the maximum value of PIDs. Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home Cc: stable@vger.kernel.org Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Linus Torvalds
|
55e6be657b |
Merge branch 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo: "The only notable change is Vipin's new misc cgroup controller. This implements generic support for resources which can be controlled by simply counting and limiting the number of resource instances - ie there's X number of these on the system and this cgroup subtree can have upto Y of those. The first user is the address space IDs used for virtual machine memory encryption and expected future usages are similar - niche hardware features with concrete resource limits and simple usage models" * 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io() cgroup/cpuset: fix typos in comments cgroup: misc: mark dummy misc_cg_res_total_usage() static inline svm/sev: Register SEV and SEV-ES ASIDs to the misc controller cgroup: Miscellaneous cgroup documentation. cgroup: Add misc cgroup controller |