IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On ARM64 the stack pointer should be aligned at a 16 byte boundary or
the SPAlignmentFault can occur. The fexit_sleep selftest allocates the
stack for the child process as a character array, this is not guaranteed
to be aligned at 16 bytes.
Because of the SPAlignmentFault, the child process is killed before it
can do the nanosleep call and hence fentry_cnt remains as 0. This causes
the main thread to hang on the following line:
while (READ_ONCE(fexit_skel->bss->fentry_cnt) != 2);
Fix this by allocating the stack using mmap() as described in the
example in the man page of clone().
Remove the fexit_sleep test from the DENYLIST of arm64.
Fixes: eddbe8e652 ("selftest/bpf: Add a test to check trampoline freeing logic.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240715173327.8657-1-puranjay@kernel.org
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
Pull seccomp updates from Kees Cook:
- interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin)
- Update selftests to check for expected NOTIF_RECV exits (Andrei
Vagin)
* tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: check that a zombie leader doesn't affect others
selftests/seccomp: add test for NOTIF_RECV and unused filters
seccomp: release task filters when the task exits
seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited
Pull execve updates from Kees Cook:
- Use value of kernel.randomize_va_space once per exec (Alexey
Dobriyan)
- Honor PT_LOAD alignment for static PIE
- Make bprm->argmin only visible under CONFIG_MMU
- Add KUnit testing of bprm_stack_limits()
* tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Avoid pathological argc, envc, and bprm->p values
execve: Keep bprm->argmin behind CONFIG_MMU
ELF: fix kernel.randomize_va_space double read
exec: Add KUnit test for bprm_stack_limits()
binfmt_elf: Honor PT_LOAD alignment for static PIE
binfmt_elf: Calculate total_size earlier
selftests/exec: Build both static and non-static load_address tests
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
Pull nolibc updates from Paul McKenney:
- Fix selftest printf format mismatch in expect_str_buf_eq()
- Stop using brk() and sbrk() when testing against musl, which
implements these two functions with ENOMEM
- Make tests use -Werror to force failure on compiler warnings
- Add limits for the {u,}intmax_t, ulong and {u,}llong types
- Implement strtol() and friends
- Add facility to skip nolibc-specific tests when running against
non-nolibc libraries
- Implement strerror()
- Also use strerror() on nolibc when running kselftests
* tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests: kselftest: also use strerror() on nolibc
tools/nolibc: implement strerror()
selftests/nolibc: introduce condition to run tests only on nolibc
tools/nolibc: implement strtol() and friends
tools/nolibc: add limits for {u,}intmax_t, ulong and {u,}llong
selftests/nolibc: run-tests.sh: use -Werror by default
selftests/nolibc: disable brk()/sbrk() tests on musl
selftests/nolibc: fix printf format mismatch in expect_str_buf_eq()
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
Lately, an additional locking was added by commit c0a40097f0
("drivers: core: synchronize really_probe() and dev_uevent()"). The
locking protects dev_uevent() calling. This function is used to send
messages from the kernel to user space. Uevent messages notify user space
about changes in device states, such as when a device is added, removed,
or changed. These messages are used by udev (or other similar user-space
tools) to apply device-specific rules.
After reloading devlink instance, udev events should be processed. This
locking causes a short delay of udev events handling.
One example for useful udev rule is renaming ports. 'forwading.config'
can be configured to use names after udev rules are applied. Some tests run
devlink_reload() and immediately use the updated names. This worked before
the above mentioned commit was pushed, but now the delay of uevent messages
causes that devlink_reload() returns before udev events are handled and
tests fail.
Adjust devlink_reload() to not assume that udev events are already
processed when devlink reload is done, instead, wait for udev events to
ensure they are processed before returning from the function.
Without this patch:
TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory
Cannot find device "swp1"
Cannot find device "swp2"
TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL]
With this patch:
$ TESTS='rif_mac_profile' ./resource_scale.sh
TEST: 'rif_mac_profile' 4 [ OK ]
TEST: 'rif_mac_profile' overflow 5 [ OK ]
This is relevant not only for this test.
Fixes: bc7cbb1e9f ("selftests: forwarding: Add devlink_lib.sh")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like we missed these two errors recently:
- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2145: Argument mixes string and array. Use * or separate argument.
Two simple fixes, it is not supposed to change the behaviour as the
variable names should not have any spaces in their names. Still, better
to fix them to easily spot new issues.
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240712-upstream-net-next-20240712-selftests-mptcp-fix-shellcheck-v1-1-1cb7180db40a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_ao/self-connect.c checked the following SNMP stats before/after
connect() to confirm that the test exercises the simultaneous connect()
path.
* TCPChallengeACK
* TCPSYNChallenge
But the stats should not be counted for self-connect in the first place,
and the assumption is no longer true.
Let's remove the check.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20240710171246.87533-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies that resolve_prog_type() works as expected when
`attach_prog_fd` is not passed in.
`prog->aux->dst_prog` in resolve_prog_type() is assigned by
`attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided.
Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will
lead to null-pointer-deref.
Verify that the null-pointer-deref bug in resolve_prog_type() is fixed.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com
There are a couple of places where the test script "sleep"s to wait for
some external condition to be met.
This is error prone, specially in slow systems (identified in CI by
"KSFT_MACHINE_SLOW=yes").
To fix this, add a "ovs_wait" function that tries to execute a command
a few times until it succeeds. The timeout used is set to 5s for
"normal" systems and doubled if a slow CI machine is detected.
This should make the following work:
$ vng --build \
--config tools/testing/selftests/net/config \
--config kernel/configs/debug.config
$ vng --run . --user root -- "make -C tools/testing/selftests/ \
KSFT_MACHINE_SLOW=yes TARGETS=net/openvswitch run_tests"
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20240710090500.1655212-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two selftest scenarios for ARRAY BIST(Board Integrated System
Test) tests:
1. Perform IFS ARRAY BIST tests once on each CPU.
2. Perform IFS ARRAY BIST tests on a random CPU with 3 rounds.
These are not meant to be exhaustive, but are some minimal tests for
for checking IFS ARRAY BIST.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
IFS (In Field Scan) driver exposes its functionality via sysfs interfaces.
Applications prepare and exercise the tests by interacting with the
aforementioned sysfs files.
Verify that the necessary sysfs entries are created after loading the IFS
driver.
Initialize test variables needed for building subsequent kself-test cases.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The variable are never referenced in the code, just remove it
that this problem was discovered by reading code
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This variable is never referenced in the code, just remove them
that this problem was discovered by reading the code
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These warnings are all of the form, "the format specified a short
(signed or unsigned) int, but the value is a full length int".
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...quite a few functions are variables are generating "unused" warnings.
Fix the warnings by deleting the unused items.
One item, the "nerrs" variable in vsdo_restorer.c's main(), is unused
but probably wants to be returned from main(), as a non-zero result.
That result is also unused right now, so another option would be to
delete it entirely, but this way, main() also gets fixed. It was missing
a return value.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns that -no-pie is "unused during compilation".
This occurs because clang only wants to see -no-pie during linking.
Here, we don't have a separate linking stage, so a compiler warning is
unavoidable without (wastefully) restructuring the Makefile.
Avoid the warning by simply disabling that warning, for clang builds.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the build fails because clang's inline asm doesn't support all of the
features that are used in the asm() snippet in sysret_rip.c.
Fix this by moving the asm code into the clang_helpers_64.S file, where
it can be built with the assembler's full set of features.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
Fix this by moving the inline asm to "pure" assembly, in two new files:
clang_helpers_32.S, clang_helpers_64.S.
As a bonus, the pure asm avoids the need for ifdefs, and is now very
simple and easy on the eyes.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use fisttps instead of fisttp to specify correctly that the output
variable is of size short.
test_FISTTP.c:28:3: error: ambiguous instructions require an explicit suffix (could be 'fisttps', or 'fisttpl')
28 | " fisttp res16""\n"
| ^
<inline asm>:3:2: note: instantiated into assembly here
3 | fisttp res16
| ^
...followed by three more cases of the same warning for other lines.
[jh: removed a bit of duplication from the warnings report, above, and
fixed a typo in the title]
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following build failure occurs in selftests/x86:
clang: error: cannot specify -o when generating multiple output files
This happens because, although gcc doesn't complain if you invoke it
like this:
gcc file1.c header2.h
...clang won't accept that form--it rejects the .h file(s). Also, the
above approach is inaccurate anyway, because file.c includes header2.h
in this case, and the inclusion of header2.h on the invocation is an
artifact of the Makefile's desire to maintain dependencies.
In Makefiles of this type, a better way to do it is to use Makefile
dependencies to trigger the appropriate incremental rebuilds, and
separately use file lists (see EXTRA_FILES in this commit) to track what
to pass to the compiler.
This commit splits those concepts up, by setting up both EXTRA_FILES and
the Makefile dependencies with a single call to the new Makefile
function extra-files.
That fixes the build failure, while still providing the correct
dependencies in all cases.
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about an unused irqcount variable. clang is correct: the
variable is incremented and then ignored.
Fix this by deleting the irqcount variable.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: John Stultz <jstultz@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
write_bm_pid_to_resctrl() uses resctrl_val to check test name which is
not a good interface generic resctrl FS functions should provide.
Tests define mongrp when needed. Remove the test name check in
write_bm_pid_to_resctrl() to only rely on the mongrp parameter being
non-NULL.
Remove write_bm_pid_to_resctrl() resctrl_val parameter and resctrl_val
member from the struct resctrl_val_param that are not used anymore.
Similarly, remove the test name constants that are no longer used.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CMT selftest instantiates a monitor group to read LLC occupancy.
Since the test also creates a control group, it is unnecessary to
create another one for monitoring because control groups already
provide monitoring too.
Remove the unnecessary monitor group from the CMT selftest.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The struct resctrl_val_param has control and monitor groups as char
arrays but they are not supposed to be mutated within resctrl_val().
Convert the ctrlgrp and mongrp char array within resctrl_val_param to
plain const char pointers and adjust the strlen() based checks to
check NULL instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bw_report is only needed for selecting the correct value from the
values IMC measured. It is a member in the resctrl_val_param struct and
is always set to "reads". The value is then checked in resctrl_val()
using validate_bw_report_request() that besides validating the input,
assumes it can mutate the string which is questionable programming
practice.
Simplify handling bw_report:
- Convert validate_bw_report_request() into get_bw_report_type() that
inputs and returns const char *. Use NULL to indicate error.
- Validate the report types inside measure_mem_bw(), not in
resctrl_val().
- Pass bw_report to measure_mem_bw() from ->measure() hook because
resctrl_val() no longer needs bw_report for anything.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The struct resctrl_val_param is there to customize behavior inside
resctrl_val() which is currently not used to full extent and there are
number of strcmp()s for test name in resctrl_val done by resctrl_val().
Create ->init() hook into the struct resctrl_val_param to cleanly
do per test initialization.
Remove also unused branches to setup paths and the related #defines
for CMT test.
While touching kerneldoc, make the adjacent line consistent with the
newly added form (callback vs call back).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The measurement done in resctrl_val() varies depending on test type.
The decision for how to measure is decided based on the string compare
to test name which is quite inflexible.
Add ->measure() callback into the struct resctrl_val_param to allow
each test to provide necessary code as a function which simplifies what
resctrl_val() has to do.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
initialize_mem_bw_resctrl() and set_mbm_path() contain complicated set
of conditions, each yielding different file to be opened to measure
memory bandwidth through resctrl FS. In practice, only two of them are
used. For MBA test, ctrlgrp is always provided, and for MBM test both
ctrlgrp and mongrp are set.
The file used differ between MBA/MBM test, however, MBM test
unnecessarily create monitor group because resctrl FS already provides
monitoring interface underneath any ctrlgrp too, which is what the MBA
selftest uses.
Consolidate memory bandwidth file used to the one used by the MBA
selftest. Remove all unused branches opening other files to simplify
the code.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'bm_pid' and 'ppid' are global variables. As they are used by different
processes and in signal handler, they cannot be entirely converted into
local variables.
The scope of those variables can still be reduced into resctrl_val.c
only. As PARENT_EXIT() macro is using 'ppid', make it a function in
resctrl_val.c and pass ppid to it as an argument because it is easier
to understand than using the global variable directly.
Pass 'bm_pid' into measure_vals() instead of relying on the global
variable which helps to make the call signatures of measure_vals() and
measure_llc_resctrl() more similar to each other.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A few functions receive PIDs through int arguments. PIDs variables
should be of type pid_t, not int.
Convert pid arguments from int to pid_t.
Before printing PID, match the type to %d by casting to int which is
enough for Linux (standard would allow using a longer integer type but
generalizing for that would complicate the code unnecessarily, the
selftest code does not need to be portable).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
