IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
syzkaller reports a warning in __xdp_reg_mem_model().
The warning occurs only if __mem_id_init_hash_table() returns an error. It
returns the error in two cases:
1. memory allocation fails;
2. rhashtable_init() fails when some fields of rhashtable_params
struct are not initialized properly.
The second case cannot happen since there is a static const rhashtable_params
struct with valid fields. So, warning is only triggered when there is a
problem with memory allocation.
Thus, there is no sense in using WARN() to handle this error and it can be
safely removed.
WARNING: CPU: 0 PID: 5065 at net/core/xdp.c:299 __xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
CPU: 0 PID: 5065 Comm: syz-executor883 Not tainted 6.8.0-syzkaller-05271-gf99c5f563c17 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__xdp_reg_mem_model+0x2d9/0x650 net/core/xdp.c:299
Call Trace:
xdp_reg_mem_model+0x22/0x40 net/core/xdp.c:344
xdp_test_run_setup net/bpf/test_run.c:188 [inline]
bpf_test_run_xdp_live+0x365/0x1e90 net/bpf/test_run.c:377
bpf_prog_test_run_xdp+0x813/0x11b0 net/bpf/test_run.c:1267
bpf_prog_test_run+0x33a/0x3b0 kernel/bpf/syscall.c:4240
__sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5649
__do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 8d5d88527587 ("xdp: rhashtable with allocator ID to pointer mapping")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/all/20240617162708.492159-1-d.dulov@aladdin.ru
Link: https://lore.kernel.org/bpf/20240624080747.36858-1-d.dulov@aladdin.ru
Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto.
The 1st bug is the way may_goto is patched. When offset is negative
it should be patched differently.
The 2nd bug is in the verifier:
when current state may_goto_depth is equal to visited state may_goto_depth
it means there is an actual infinite loop. It's not correct to prune
exploration of the program at this point.
Note, that this check doesn't limit the program to only one may_goto insn,
since 2nd and any further may_goto will increment may_goto_depth only
in the queued state pushed for future exploration. The current state
will have may_goto_depth == 0 regardless of number of may_goto insns
and the verifier has to explore the program until bpf_exit.
Fixes: 011832b97b31 ("bpf: Introduce may_goto instruction")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/bpf/CAADnVQL-15aNp04-cyHRn47Yv61NXfYyhopyZtUyxNojUZUXpA@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20240619235355.85031-1-alexei.starovoitov@gmail.com
In the attempt to clear and recreate the initial ID map for LPA2, we
wrongly use 'start - end' as the map size and make the memset() almost a
nop.
Fix it by passing the correct map size.
Fixes: 9684ec186f8f ("arm64: Enable LPA2 at boot if supported by the system")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240621092809.162-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/amilo-rfkill.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/uv_sysfs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/ibm_rtl.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/xo1-rfkill.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/firmware_attributes_class.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/wireless-hotkey.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-platform-x86-v1-1-d850e53619ee@quicinc.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/pmc/intel_pmc_core_pltdrv.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-hid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-vbtn.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-rst.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/intel/intel-smartconnect.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-platform-x86-intel-v1-1-5ed967425b04@quicinc.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/siemens/simatic-ipc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/siemens/simatic-ipc-batt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/siemens/simatic-ipc-batt-apollolake.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/siemens/simatic-ipc-batt-elkhartlake.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/siemens/simatic-ipc-batt-f7188x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-platform-x86-siemens-v1-1-b399d7d6ae64@quicinc.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On the LG Gram 16Z90S, the WMAB and WMBB ACPI methods are not mapped
under \XINI, but instead are mapped under \_SB.XINI.
The reason for this is that the LGEX0820 ACPI device used by this
driver is mapped at \_SB.XINI, so the ACPI methods where moved as well
to appear below the LGEX0820 ACPI device.
Fix this by using the ACPI handle from the ACPI device when evaluating
both methods.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218901
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The LGEX0815 ACPI device id is used for handling hotkey events, but
this functionality is already handled by the wireless-hotkey driver.
The LGEX0820 ACPI device id however is used to manage various
platform features using the WMAB/WMBB ACPI methods. Use this ACPI
device id to avoid blocking the wireless-hotkey driver from probing.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The rfkill hotkey handling is already provided by the wireless-hotkey
driver. Remove the now unnecessary rfkill hotkey handling to avoid
duplicating functionality.
The ACPI notify handler still prints debugging information when
receiving ACPI notifications to aid in reverse-engineering.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The LGEX0815 ACPI device is used by the "LG Airplane Mode Button"
Windows driver for handling rfkill requests. When the ACPI device
receives an 0x80 ACPI notification, an rfkill event is to be
send to userspace.
Add support for the LGEX0815 ACPI device to the driver.
Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken
DT due to any error this value can be any. Without this value validation
there can be out of chips->irqs array boundaries access in
davinci_gpio_probe().
Validate the obtained nirq value so that it won't exceed the maximum
number of IRQs per bank.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240618144344.16943-1-amishin@t-argos.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add check for the return value of platform_device_add_resources() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240605032745.2916183-1-nichen@iscas.ac.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A fix to enable the TI eQEP clock explicitly in the probe callback
rather than hope it's already enabled by something else on the system by
the time we need it.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZniZKwAKCRC1SFbKvhIj
K9gnAQCARAZwZtuwgowiycAP14QbhpG6Rt7O9GYKJgp40ADLdwEAjMLXmQ9k+1kf
p94RZJlWFH8PPeTSSGTjGM2bPQdlMgs=
=tVH0
-----END PGP SIGNATURE-----
Merge tag 'counter-fixes-for-6.10' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 6.10
A fix to enable the TI eQEP clock explicitly in the probe callback
rather than hope it's already enabled by something else on the system by
the time we need it.
* tag 'counter-fixes-for-6.10' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: ti-eqep: enable clock at probe
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.
In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.
cc: stable@vger.kernel.org
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sclp_init() fails it only partially cleans up: if there are multiple
failing calls to sclp_init() sclp_state_change_event will be added several
times to sclp_reg_list, which results in the following warning:
------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
[<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
[<000003ffe0a8d37e>] sclp_init+0x40e/0x450
[<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
[<000003ffe15b77a6>] do_initcalls+0x126/0x150
[<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
[<000003ffe0d6650e>] kernel_init+0x2e/0x180
[<000003ffe000301c>] __ret_from_fork+0x3c/0x60
[<000003ffe0d759ca>] ret_from_fork+0xa/0x30
Fix this by removing sclp_state_change_event from sclp_reg_list when
sclp_init() fails.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
After the rework of "Parallel CPU bringup", the cmdline "nosmp" and
"maxcpus=0" parameters are not working anymore. These parameters set
setup_max_cpus to zero and that's handed to bringup_nonboot_cpus().
The code there does a decrement before checking for zero, which brings it
into the negative space and brings up all CPUs.
Add a zero check at the beginning of the function to prevent this.
[ tglx: Massaged change log ]
Fixes: 18415f33e2ac4ab382 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE")
Fixes: 06c6796e0304234da6 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240618081336.3996825-1-chenhuacai@loongson.cn
Fix unintended sign extension and klockwork issues. These are not real
issue but for sanity checks.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a rare deadlock when we're doing an emergency shutdown due to
failure to do a journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The liointc hardware provides separate Interrupt Status Registers (ISR) for
each core. The current code uses always the ISR of core #0, which works
during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this
causes interrupts to be lost because they are not configured in the
corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
Multi-bridge machines required that all eiointc controllers in the system
are initialized, otherwise the system does not boot.
The initialization happens on the boot CPU during early boot and relies on
cpu_to_node() for identifying the individual nodes.
That works when the number of possible CPUs is large enough, but with a
command line limit, e.g. "nr_cpus=$N" for kdump, but fails when the CPUs
of the secondary nodes are not covered.
During early ACPI enumeration all CPU to node mappings are recorded up to
CONFIG_NR_CPUS. These are accessible via early_cpu_to_node() even in the
case that "nr_cpus=N" truncates the number of possible CPUs and only
provides the possible CPUs via cpu_to_node() translation.
Change the node lookup in the driver to use early_cpu_to_node() so that
even with a limitation on the number of possible CPUs all eointc instances
are initialized.
This can't obviously cure the case where CONFIG_NR_CPUS is too small.
[ tglx: Massaged changelog ]
Fixes: 64cc451e45e1 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240623034113.1808727-1-chenhuacai@loongson.cn
is not defined as well documentation fixes to start using inclusive
terminology. The drivers get paths in DT bindings fixed as well as
proper interrupt handling for the ocores driver.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmZ31U4ACgkQFA3kzBSg
KbYgMg/9Ew5g86A9u1BBiCytjzNXIrNNbL1rm7GsHH4elq5h+Pa2jS1AZjHB1ZtC
8KwogPvUeqJyzmO6SEzJVoDq8B4QIUGS7QFadqhKSNScO60MNfRmHXiOPoIXMNkS
pws3oquqM3BDdfvqtod1KFkVKsfok+UlDcOXmGJLKNzoBaBfZWHwGVBEW1E1xdLt
PrimxsIzMWNySmWimTf1nQl5Ah3gzcB79SdQFvqU50dGmscF4fAd7BirjNktrgJB
E45jD5341U2xb1pCEtsfgwyvJiul//Cx/iHneCiu/EvVelZjl/WG1lNu5DYpOzmU
oqhqkZJw3o0G3W8dK/CjyGlp8MsbQJoa2qSGA2V+1ZtQyj09wM727qhRMkFvqsRH
moTTNx2+KcSWrvjjXMvC2oht/rfKYbLzFSqzDiRzmphfgFjPQKDCL6EVoyQwvOYD
LpFRKyhSMTR/OpHfpdES+VQwvcvfmk5wHHQu5kl956bec63buIj0cFLiaAxiJR3v
HhsCeX+BCp5+3z15+/x2vnKPzNAmS8oc0ZOGiN3W8qYUBpv1GjwLXuEDNLKCXf+W
6xlTCb+lNTSR2m3R2me1fI0iuFQW5nLT6t3T/mGbNLu4xJ79Wq0rLRXpMxJQDnf7
XB+251eg2BOTe0Qbi015NUNF2LbVblsxz8n9pqYaRsF+bVyaiO0=
=T67e
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
-----BEGIN PGP SIGNATURE-----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=TIGs
-----END PGP SIGNATURE-----
Merge tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Five smb3 client fixes
- three nets/fiolios cifs fixes
- fix typo in module parameters description
- fix incorrect swap warning"
* tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Move the 'pid' from the subreq to the req
cifs: Only pick a channel once per read request
cifs: Defer read completion
cifs: fix typo in module parameter enable_gcm_256
cifs: drop the incorrect assertion in cifs_swap_rw()
Use numa_valid_node() function to verify that nid is a valid node ID
instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmZ3vm8QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kV6DB/41uPq1Dr2hk8ZtBEyaZg/XTA1WU8rc95PY
NqnWsrV1MjNt7ve2vBhZtirI+x8QIkpa/WV4y1qma2iBju1bOzkOw1o3VBwSeFMi
hTyLK9IFbJi9bF8xk4Lp/Km0VagpCAJLdWFdxzQCvtUfN2AZHNA+s3nk8VQIjnyj
glY7fdl9j6vtCRkT/5F0tETF8RfaoMuldwJGSIVjCQIk2oBkcPKnWcG4UQaVs2mP
F0UPQtNJxL+NCk/VGccsWhXONJ7amHK+Qq6xWZaC9MLAaoRAXDg05/S+t2m1iZxt
3HNBtrSPagNo7xTDsZ4sF+z+3YFk18QWKykRs2XXNfAapF6Ox2vs
=vZLS
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix fragility in checks for unset node ID.
Use numa_valid_node() function to verify that nid is a valid node
ID instead of inconsistent comparisons with either NUMA_NO_NODE or
MAX_NUMNODES"
* tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use numa_valid_node() helper to check for invalid node ID
- A randconfig build fix for the VMware virtual GPU driver
-----BEGIN PGP SIGNATURE-----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=WXpS
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- An ARM-relevant fix to not free default RMIDs of a resource control
group
- A randconfig build fix for the VMware virtual GPU driver
* tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't try to free nonexistent RMIDs
drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
TC queues needs to be correctly updated when the number of queues on
a VSI is reconfigured, so netdev's queue and TC settings will be
dynamically adjusted and could accurately represent the underlying
hardware state after changes to the VSI queue counts.
Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Woojung Huh <Woojung.huh@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all PSE attributes are used for the pse-set netlink command.
Select only the ones used by ethtool.
Fixes: f8586411e40e ("netlink: specs: Expand the pse netlink command with PoE interface")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debug code relies on btree_trans_list being ordered so that it can
resume on subsequent calls or lock restarts.
However, it was using trans->locknig_wait.task.pid, which is incorrect
since btree_trans objects are cached and reused - typically by different
tasks.
Fix this by switching to pointer order, and also sort them lazily when
required - speeding up the btree_trans_get() fastpath.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
debug.c was using closure_get() on a different thread's closure where
the we don't know if the object being refcounted is alive.
We keep btree_trans objects on a list so they can be printed by debug
code, and because it is cost prohibitive to touch the btree_trans list
every time we allocate and free btree_trans objects, cached objects are
also on this list.
However, we do not want the debug code to see cached but not in use
btree_trans objects - critically because the btree_paths array will have
been freed (if it was reallocated).
closure_get() is also incorrect to use when that get may race with it
hitting zero, i.e. we must already have a ref on the object or know the
ref can't currently hit 0 for other reasons (as used in the cycle
detector).
to fix this, use the previously introduced closure_get_not_zero(),
closure_return_sync(), and closure_init_stack_release(); the debug code
now can only take a ref on a trans object if it's alive and in use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Provide new primitives for solving a lifetime issue with bcachefs
btree_trans objects.
closure_sync_return(): like closure_sync(), wait synchronously for any
outstanding gets. like closure_return, the closure is considered
"finished" and the ref left at 0.
closure_get_not_zero(): get a ref on a closure if it's alive, i.e. the
ref is not zero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_deadlock_to_text() searches the list of btree transactions to find
a deadlock - when it finds one it's done; it's not like other *_read()
functions that's printing each object.
Factor out btree_deadlock_to_text() to make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were grabbing the sequence number before unlock incremented it - fix
this by moving the increment to seqmutex_lock() (so the seqmutex_relock()
failure path skips the mutex_trylock()), and returning the sequence
number from unlock(), to make the API simpler and safer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZnaUpBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1u6eEA+QHGf5qPM6Vyvma4kuqjMolbaAZ3
7J35Bk2b6OvbQu/BAQDI4VIpHZiTP3wEuC7tZBraPT3jjh5hba/BeiWkgEPBBg==
=RueN
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This pull request fixes the paths of the dt-schema to their
complete locations for the ChromeOS EC tunnel driver and the
Atmel at91sam drivers.
Additionally, the OpenCores driver receives a fix for an issue
that dates back to version 2.6.18. Specifically, the interrupts
need to be acknowledged (clearing all pending interrupts) after
enabling the core.
A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ2+14ACgkQJNaLcl1U
h9AliQf9EXOZ1mUnCRP5MrWC6hBkgKnL16wQhwJYhk7GreKlehKLNi389qbDrYii
aUbb5fIxE39PEQvDuBG5cJtIW8P5bPO5TqJD/9LcW5lDqoFGIyFLfOlYui8bgDLH
OW0FRa3imDiLKyKaGeu70Dr06VzikndInMQ7MitutXxS6/u4jGE8AQ3fh1YXl6fB
iV7uj8DFTpIg/fHsFYS2elVhvd6NRR3EkFnXvYrGvrLwnv4o+vd21G29L0lVxEUW
VMDfxKRok59xSNHzMEkrbS5BcGWyDMXkMXEpS9jjS8gazHv/wcJ5JWPMQx40g4FQ
y6zoIjfJgYYRK3FEPbKV/hidLC8ZBA==
=5kHA
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes for incorrect device descriptions, plus a
fix for a missing symbol export which causes build failures for some
newly added drivers in other trees"
* tag 'regulator-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
regulator: bd71815: fix ramp values
regulator: core: Fix modpost error "regulator_get_regmap" undefined
regulator: tps6594-regulator: Fix the number of irqs for TPS65224 and TPS6594
A number of fixes that have built up for SPI, a bunch of driver specific
ones including an unfortunate revert of an optimisation for the i.MX
driver which was causing issues with some configurations, plus a couple
of core fixes for the rarely used octal mode and for a bad interaction
between multi-CS support and target mode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ2+ekACgkQJNaLcl1U
h9DD8Af/fGg7Sf7Ajt8IVI4D33+4SujFWHmu0ELgZVS4k7i+BpiZFJwHpKsfX0eN
I1/gVq5K6SJc1n1kiR2z2xCGD4JL0uqwk8y6QhARGnwQUVNrcsrM6TvT9N8uRelB
tEoCfDu8Wj2KNLHn5v4LL4uNnIEBamOHbRVTVq62JcXawgVZiiLQT436APXaS7uq
JstmiaiRzFVSQfoU2SBpbvXwp8QjqeV3l02DKwaafpoiMpccaUz2TNAXytXysHkE
h3je8uFMU+yYqK3G8t9HQQQema3GHFi1NtK472TDQe3FxZr8IzW6Gy/iFRArcSZV
rVEP07Q/X5OlK5LAs/hFbl+sEzkYbw==
=8xay
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A number of fixes that have built up for SPI, a bunch of driver
specific ones including an unfortunate revert of an optimisation for
the i.MX driver which was causing issues with some configurations,
plus a couple of core fixes for the rarely used octal mode and for a
bad interaction between multi-CS support and target mode"
* tag 'spi-fix-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: imx51: revert burst length calculation back to bits_per_word
spi: Fix SPI slave probe failure
spi: Fix OCTAL mode support
spi: stm32: qspi: Clamp stm32_qspi_get_mode() output to CCR_BUSWIDTH_4
spi: stm32: qspi: Fix dual flash mode sanity test in stm32_qspi_setup()
spi: cs42l43: Drop cs35l56 SPI speed down to 11MHz
spi: cs42l43: Correct SPI root clock speed
