IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add new module param "allow_restart" to control scsi_device's allow_restart
flag. This flag determines if EH is triggered after a command completes
with sense_key 0x6, ASC 0x4 and ASCQ 0x2. EH would be triggered if
allow_restart=1 in this condition.
The new param can be used with the error injection capability to test how
commands completing with sense_key 0x6, ASC 0x4 and ASCQ 0x2 are handled.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-11-haowenchao2@huawei.com
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The interface is found at
/sys/kernel/debug/scsi_debug/target<h:c:t>/fail_reset where <h:c:t>
identifies the target to inject errors on. It's a simple bool type
interface which would make this target's reset fail if set to 'Y'.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-10-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add error injection type 4 to make scsi_debug_device_reset() return FAILED.
Fail abort command format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x4 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "4 -10 0x12" > ${error}
will make the device return FAILED when trying to reset LUN with inquiry
command 10 times.
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "4 -10 0xff" > ${error}
will make the device return FAILED when trying to reset LUN 10 times.
Usually we do not care about what command it is when trying to perform
reset LUN, so 0xff could be applied.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-9-haowenchao2@huawei.com
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add error injection type 3 to make scsi_debug_abort() return FAILED. Fail
abort command format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x3 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "3 -10 0x12" > ${error}
will make the device return FAILED when aborting inquiry command 10 times.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-8-haowenchao2@huawei.com
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a fail command error is injected, set the command's status and sense
data then finish this SCSI command.
Set SCSI command's status and sense data format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x2 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error Count |
| | | 0: the rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
| 4 | x8 | Host byte in scsi_cmd::status |
| | | [scsi_cmd::status has 32 bits holding these 3 bytes] |
+--------+------+-------------------------------------------------------+
| 5 | x8 | Driver byte in scsi_cmd::status |
+--------+------+-------------------------------------------------------+
| 6 | x8 | SCSI Status byte in scsi_cmd::status |
+--------+------+-------------------------------------------------------+
| 7 | x8 | SCSI Sense Key in scsi_cmnd |
+--------+------+-------------------------------------------------------+
| 8 | x8 | SCSI ASC in scsi_cmnd |
+--------+------+-------------------------------------------------------+
| 9 | x8 | SCSI ASCQ in scsi_cmnd |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "2 -10 0x88 0 0 0x2 0x3 0x11 0x0" >${error}
will make device's read command return with media error with additional
sense of "Unrecovered read error" (UNC):
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-7-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a fail queuecommand error is injected, return the failed value defined
in the rule from queuecommand.
Make queuecommand return format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x1 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
| 4 | x32 | The queuecommand() return value we want |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "1 1 0x12 0x1055" > ${error}
will make each INQUIRY command sent to that device return 0x1055
(SCSI_MLQUEUE_HOST_BUSY).
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-6-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a timeout error is injected, return 0 from scsi_debug_queuecommand to
make the command time out.
Time out SCSI command format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error type, fixed to 0x0 |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
Examples:
error=/sys/kernel/debug/scsi_debug/0:0:0:1/error
echo "0 -10 0x12" > ${error}
will make the device's inquiry command time out 10 times.
echo "0 1 0x12" > ${error}
will make the device's inquiry time out each time it is invoked on this
device.
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-5-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The grammar to remove error injection is a line with fixed 3 columns
separated by spaces.
First column is fixed to "-". It tells this is a removal operation. Second
column is the error code to match. Third column is the scsi command to
match.
For example the following command would remove timeout injection of inquiry
command:
echo "- 0 0x12" > /sys/kernel/debug/scsi_debug/0:0:0:1/error
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-4-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This new facility uses the debugfs pseudo file system which is typically
mounted under the /sys/kernel/debug directory and requires root permissions
to access.
The interface file is found at /sys/kernel/debug/scsi_debug/<h:c:t:l>/error
where <h:c:t:l> identifies the device (logical unit (LU)) to inject errors
on.
For the following description the ${error} environment variable is assumed
to be set to/sys/kernel/debug/scsi_debug/1:0:0:0/error where 1:0:0:0 is a
pseudo device (LU) owned by the scsi_debug driver. Rules are written to
${error} in the normal sysfs fashion (e.g. 'echo "0 -2 0x12" > ${error}').
More than one rule can be active on a device at a time and inactive rules
(i.e. those whose error count is 0) remain in the rule listing. The
existing rules can be read with 'cat ${error}' with oneline output for each
rule.
The interface format is line-by-line, each line is an error injection rule.
Each rule contains integers separated by spaces, the first three columns
correspond to "Error code", "Error count" and "SCSI command", other
columns depend on Error code.
General rule format:
+--------+------+-------------------------------------------------------+
| Column | Type | Description |
+--------+------+-------------------------------------------------------+
| 1 | u8 | Error code |
| | | 0: timeout SCSI command |
| | | 1: fail queuecommand, make queuecommand return |
| | | given value |
| | | 2: fail command, finish command with SCSI status, |
| | | sense key and ASC/ASCQ values |
| | | 3: make abort commands for specific command fail |
| | | 4: make reset lun for specific command fail |
+--------+------+-------------------------------------------------------+
| 2 | s32 | Error count |
| | | 0: this rule will be ignored |
| | | positive: the rule will always take effect |
| | | negative: the rule takes effect n times where -n is |
| | | the value given. Ignored after n times |
+--------+------+-------------------------------------------------------+
| 3 | x8 | SCSI command opcode, 0xff for all commands |
+--------+------+-------------------------------------------------------+
| ... | xxx | Error type specific fields |
+--------+------+-------------------------------------------------------+
Notes:
- When multiple error inject rules are added for the same SCSI command,
the one with smaller error code will take effect (and the others will be
ignored).
- If the same error (i.e. same Error code and SCSI command) is added, the
older one will be overwritten..
- Currently, the basic types are (u8/u16/u32/u64/s8/s16/s32/s64) and the
hexadecimal types (x8/x16/x32/x64).
- Where a hexadecimal value is expected (e.g. Column 3: SCSI command
opcode) the "0x" prefix is optional on the value (e.g. the INQUIRY
opcode can be given as '0x12' or '12').
- When the Error count is negative, reading ${error} will show that value
incrementing, stopping when it gets to 0.
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-3-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create directory scsi_debug in the root of the debugfs filesystem. Prepare
to add interface for manage error injection.
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231010092051.608007-2-haowenchao2@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ramdisk rwlocks are not used anymore.
Fixes: 87c715dcde ("scsi: scsi_debug: Add per_host_store option")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20230628150638.53218-1-mlombard@redhat.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently scsi_debug_device_reset() does not do much apart from setting the
SDEBUG_UA_POR ("Power on, reset, or bus device reset") flag, which is
eventually passed back to the SCSI midlayer later for a "unit attention"
command.
There is a report that blktest scsi/007 test fails due to commit
1107c7b24e ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd").
The problem there is that there are dangling scsi_debug queued commands
when we attempt to remove the driver.
scsi/007 test triggers SCSI EH and attempts to abort a timed-out command.
Function scsi_debug_device_reset() is called as part of the EH, but does
not deal with outstanding erroneous command. Prior to the named commit,
removing the driver caused all dangling queued commands to be stopped -
this should have not been necessary.
Fix by aborting outstanding commands on a scsi_device basis from
scsi_debug_device_reset().
Fixes: 1107c7b24e ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304071111.e762fcbd-yujie.liu@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230416175654.159163-1-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch reports: drivers/scsi/scsi_debug.c:6996
scsi_debug_init() warn: missing error code 'ret'
Although it is unlikely that KMEM_CACHE might fail, but if it does then ret
might be zero. So to fix this explicitly mark ret as "-ENOMEM" and then
goto driver_unreg.
Fixes: 1107c7b24e ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230406074607.3637097-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry <john.g.garry@oracle.com> says:
It's easy to get scsi_debug to error on throughput testing when we have
multiple shosts:
$ lsscsi
[7:0:0:0] disk Linux scsi_debug 0191
[0:0:0:0] disk Linux scsi_debug 0191
$ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read
--bs=4k --iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg
--eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error
jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 40 processes
[ 27.521809] hrtimer: interrupt took 33067 ns
[ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00
on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
The issue is related to how the driver manages submit queues and tags. A
single array of submit queues - sdebug_q_arr - with its own set of tags is
shared among all shosts. As such, for occasions when we have more than one
host it is possible to overload the submit queues and run out of tags.
Another separate issue that we may reduce the shost submit queue depth,
sdebug_max_queue, dynamically causing the shost to be overloaded. How many
IOs which the shost may be sent is fixed at can_queue at init time, which
is the same initial value for sdebug_max_queue. So reducing
sdebug_max_queue means that the shost may be sent more IOs than it is
configured to handle, causing overloading.
This series removes the scsi_debug submit queue concept and uses
pre-existing APIs to manage and examine tags, like scsi_block_requests()
and blk_mq_tagset_busy_iter(). Using standard APIs makes the driver more
maintainable and extensible in future.
A restriction is also added to allow sdebug_max_queue only be modified when
no shosts are present, i.e. we need to remove shosts, modify
sdebug_max_queue, and then re-add the shosts.
Link: https://lore.kernel.org/r/20230327074310.1862889-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's easy to get scsi_debug to error on throughput testing when we have
multiple shosts:
$ lsscsi
[7:0:0:0] disk Linux scsi_debug 0191
[0:0:0:0] disk Linux scsi_debug 0191
$ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read --bs=4k
--iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg
--eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error
jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 40 processes
[ 27.521809] hrtimer: interrupt took 33067 ns
[ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00
on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
The issue is related to how the driver manages submit queues and tags. A
single array of submit queues - sdebug_q_arr - with its own set of tags is
shared among all shosts. As such, for occasions when we have more than one
shost it is possible to overload the submit queues and run out of tags.
The struct sdebug_queue is to manage tags and hold the associated
queued command entry pointer (for that tag).
Since the tagset iters are now used for functions like
sdebug_blk_mq_poll(), there is no need to manage these queues. Indeed,
blk-mq already provides what we need for managing tags and queues.
Drop sdebug_queue and all its usage in the driver.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-12-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost->can_queue value is initially used to set per-HW queue context
tag depth in the block layer. This ensures that the shost is not sent too
many commands which it can deal with. However lowering sdebug_max_queue
separately means that we can easily overload the shost, as in the following
example:
$ cat /sys/bus/pseudo/drivers/scsi_debug/max_queue
192
$ cat /sys/class/scsi_host/host0/can_queue
192
$ echo 100 > /sys/bus/pseudo/drivers/scsi_debug/max_queue
$ cat /sys/class/scsi_host/host0/can_queue
192
$ fio --filename=/dev/sda --direct=1 --rw=read --bs=4k --iodepth=256
--runtime=1200 --numjobs=10 --time_based --group_reporting
--name=iops-test-job --eta-newline=1 --readonly --ioengine=io_uring
--hipri --exitall_on_error
iops-test-job: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 10 processes
[ 111.269885] scsi_io_completion_action: 400 callbacks suppressed
[ 111.269885] blk_print_req_error: 400 callbacks suppressed
[ 111.269889] I/O error, dev sda, sector 440 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[ 111.269892] sd 0:0:0:0: [sda] tag#132 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 111.269897] sd 0:0:0:0: [sda] tag#132 CDB: Read(10) 28 00 00 00 01 68 00 00 08 00
[ 111.277058] I/O error, dev sda, sector 360 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[...]
Ensure that this cannot happen by allowing sdebug_max_queue be modified
only when we have no shosts. As such, any shost->can_queue value will match
sdebug_max_queue, and sdebug_max_queue cannot be modified separately.
Since retired_max_queue is no longer set, remove support.
Continue to apply the restriction that sdebug_host_max_queue cannot be
modified when sdebug_host_max_queue is set. Adding support for that would
mean extra code, and no one has complained about this restriction
previously.
A command like the following may be used to remove a shost:
echo -1 > /sys/bus/pseudo/drivers/scsi_debug/add_host
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-11-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The functions to update ndelay and delay value first check whether we have
any in-flight IO for any host. It does this by checking if any tag is used
in the global submit queues.
We can achieve the same by setting the host as blocked and then ensuring
that we have no in-flight commands with scsi_host_busy().
Note that scsi_host_busy() checks SCMD_STATE_INFLIGHT flag, which is only
set per command after we ensure that the host is not blocked, i.e. we see
more commands active after the check for scsi_host_busy() returns 0.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-10-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-9-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eventually we will drop the sdebug_queue struct as it is not really
required, so start with making the sdebug_queued_cmd dynamically allocated
for the lifetime of the scsi_cmnd in the driver.
As an interim measure, make sdebug_queued_cmd.sd_dp a pointer to struct
sdebug_defer. Also keep a value of the index allocated in
sdebug_queued_cmd.qc_arr in struct sdebug_queued_cmd.
To deal with an races in accessing the scsi cmnd allocated struct
sdebug_queued_cmd, add a spinlock for the scsi command in its priv area.
Races may be between scheduling a command for completion, aborting a
command, and the command actually completing and freeing the struct
sdebug_queued_cmd.
[mkp: typo fix]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The feature to block queues is quite dubious, since it races with in-flight
IO. Indeed, it seems unnecessary for block queues for any times we do so.
Anyway, to keep the same behaviour, use standard SCSI API to stop IO being
sent - scsi_{un}block_requests().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no reason that calls to block_unblock_all_queues() from different
context can't race with one another, so protect with the
sdebug_host_list_mutex. There's no need for a more fine-grained per shost
locking here (and we don't have a per-host lock anyway).
Also simplify some touched code in sdebug_change_qdepth().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only
lock in non-atomic context in this driver, so use a mutex instead, which is
friendlier if we need to schedule when iterating.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-4-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clear_luns_changed_on_target(), we iter all devices for all shosts to
conditionally clear the SDEBUG_UA_LUNS_CHANGED flag in the per-device
uas_bm.
One condition to see whether we clear the flag is to test whether the host
for the device under consideration is the same as the matching device's
(devip) host. This check will only ever pass for devices for the same
shost, so only iter the devices for the matching device shost.
We can now drop the spinlock'ing of the sdebug_host_list_lock in the same
function. This will allow us to use a mutex instead of the spinlock for the
global shost lock, as clear_luns_changed_on_target() could be called in
non-blocking context, in scsi_debug_queuecommand() -> make_ua() ->
clear_luns_changed_on_target() (which is why required a spinlock).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-3-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a report that the blktests scsi/004 test for "TASK SET FULL" (TSF)
now fails.
The condition upon we should issue this TSF is when the sdev queue is
full. The check for a full queue has an off-by-1 error. Previously we would
increment the number of requests in the queue after testing if the queue
would be full, i.e. test if one less than full. Since we now use
scsi_device_busy() to count the number of requests in the queue, this would
already account for the current request, so fix the test for queue full
accordingly.
Fixes: 151f0ec9dd ("scsi: scsi_debug: Drop sdebug_dev_info.num_in_q")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303201334.18b30edc-oliver.sang@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If there is no driver match function, the driver core assumes that each
candidate pair (driver, device) matches, see driver_match_device().
Drop the pseudo_lld bus match function that always returned 1. This results
in the same behaviour as when there is no match function.
[mkp+jgg: patch description]
Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20230319042732.278691-1-sensor1010@163.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently commands completed via poll mode are not included in the
statistics gathering for deferred completions and missed CPUs.
Poll mode completions should be treated the same as other deferred
completion types, so add poll mode completions to the statistics.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-12-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The command abort feature allows us to test aborting a command which has
timed-out.
The idea is that for specific commands we just don't call scsi_done() and
allow the request to timeout, which ensures SCSI EH kicks-in we try to
abort the command.
Since commit 4a0c6f432d ("scsi: scsi_debug: Add new defer type for
mq_poll") this does not seem to work. The issue is that we clear the
sd_dp->aborted flag in schedule_resp() before the completion callback has
run. When the completion callback actually runs, it calls scsi_done() as
normal as sd_dp->aborted unset. This is all very racy.
Fix by not clearing sd_dp->aborted in schedule_resp(). Also move the call
to blk_abort_request() from schedule_resp() to sdebug_q_cmd_complete(),
which makes the code have a more logical sequence.
I also note that this feature only works for commands which are classed as
"SDEG_RES_IMMED_MASK", but only practically triggered with prior RW
commands. So for my experiment I need to run fio to trigger the error on
the "nth" command (see inject_on_this_cmd()), and then run something like
sg_sync to queue a command to actually trigger the abort.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-11-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In schedule_resp(), under certain conditions we check whether the
per-device queue is full (num_in_q == queue depth - 1) and we may inject a
"task set full" (TSF) error if it is.
However how we read num_in_q is racy - many threads may see the same "queue
is full" value (and also issue a TSF).
There is per-queue locking in reading per-device num_in_q, but that would
not help.
Replace how we read num_in_q at this location with a call to
scsi_device_busy(). Calling scsi_device_busy() is likewise racy (as reading
num_in_q), so nothing lost or gained. Calling scsi_device_busy() is also
slow as it needs to read all bits in the per-device budget bitmap, but we
can live with that since we're just a simulator and it's only under a
certain configs which we would see this.
Also move the "task set full" print earlier as it would only be called now
under this condition. However, previously it may not have been called -
like returning early - but keep it simple and always call it.
At this point we can drop sdebug_dev_info.num_in_q - it is difficult to
maintain properly and adds extra normal case command processing.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-10-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The per-device num_in_q value cannot exceed the device queue depth, so drop
the check.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-9-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The check for device pointer for the SCSI command is unnecessary, so drop
it.
The only caller is scsi_try_host_reset() -> eh_host_reset_handler(), and
there that pointer cannot be NULL.
Indeed, there is already code later in the same function which does not
check the device pointer for the SCSI command.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The checks for SCSI cmnd, SCSI device, and SCSI host are unnecessary, so
drop them. Likewise, drop the NULL check for sdbg_host.
The only caller is scsi_try_bus_reset() -> eh_bus_reset_handler(), and
there those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The checks for SCSI cmnd, SCSI device, and SCSI host are unnecessary, so
drop them. Likewise, drop the NULL check for sdbg_host.
The only caller is scsi_try_target_reset() -> eh_target_reset_handler(),
and there those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI cmnd pointer arg would never be NULL, so drop the check. In
addition, its SCSI device pointer would never be NULL (so drop that check
also).
The only caller is scsi_try_bus_device_reset(), and the command and its
device pointer could not be NULL when calling eh_device_reset_handler()
there.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI cmnd pointer arg would never be NULL, so drop the check. In
addition, its SCSI device pointer would never be NULL.
The only caller is scsi_send_eh_cmnd() -> scsi_abort_eh_cmnd() ->
scsi_try_to_abort_cmd() -> scsi_try_to_abort_cmd(), and in the origin of
that chain those pointers cannot be NULL.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-4-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sdebug_device_create(), the devip->sdbg_host pointer is needlessly set
twice, so stop doing that.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-3-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This driver stores just a pointer to the driver host structure in
host->hostdata[]. Most other drivers actually have the driver host
structure allocated in host->hostdata[], but this driver is different as we
allocate that memory separately before allocating the shost memory.
However there is no need to allocate this memory only in host->hostdata[]
when we can already look up the driver host structure from shost->dma_dev,
so add a macro for this - shost_to_sdebug_host(). Rename to_sdebug_host()
-> dev_to_sdebug_host() to avoid ambiguity.
Also remove a check for !sdbg_host in find_build_dev_info(), as this cannot
be true. Other similar checks will be later removed.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230313093114.1498305-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are
some core changes, mostly around reworking some of our user context
assumptions in device put and moving some code around. The remaining
updates are bug fixes and minor changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY5jjrSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9iAPwN++uF
BNlCD36duS8LslKQMPAmFxWt3d/4RWAHsXj2WQEAtu9q8K9PSe1ueb4y+rAEG4oj
2AUQhR3v9ciWBBKlDog=
=JYJC
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
The 2nd return statement in inquiry_vpd_b0() is unreachable, so delete it.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20221213142122.1011886-1-john.g.garry@oracle.com
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
Afer commit 1fa5ae857b ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.
As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().
When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c819 ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: c3e2fe9222 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a simple mechanical transformation done by:
@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
(E)
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c79 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
