IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull RAS updates from Borislav Petkov:
- Misc fixes to the MCE code all over the place, by Jan H. Schönherr.
- Initial support for AMD F19h and other cleanups to amd64_edac, by
Yazen Ghannam.
- Other small cleanups.
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Make fam_ops static global
EDAC/amd64: Drop some family checks for newer systems
EDAC/amd64: Add family ops for Family 19h Models 00h-0Fh
x86/amd_nb: Add Family 19h PCI IDs
EDAC/mce_amd: Always load on SMCA systems
x86/MCE/AMD, EDAC/mce_amd: Add new Load Store unit McaType
x86/mce: Fix use of uninitialized MCE message string
x86/mce: Fix mce=nobootlog
x86/mce: Take action on UCNA/Deferred errors again
x86/mce: Remove mce_inject_log() in favor of mce_log()
x86/mce: Pass MCE message to mce_panic() on failed kernel recovery
x86/mce/therm_throt: Mark throttle_active_work() as __maybe_unused
* pm-core:
PM-runtime: add tracepoints for usage_count changes
* powercap:
powercap/intel_rapl: add support for JasperLake
x86/cpu: Add Jasper Lake to Intel family
powercap/intel_rapl: add support for TigerLake Mobile
* pm-opp:
opp: Replace list_kref with a local counter
opp: Free static OPPs on errors while adding them
* pm-avs:
power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c
power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call
power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static
power: avs: qcom-cpr: remove set but unused variable
power: avs: qcom-cpr: make sure that regmap is available
power: avs: qcom-cpr: fix unsigned expression compared with zero
power: avs: qcom-cpr: fix invalid printk specifier in debug print
power: avs: Add support for CPR (Core Power Reduction)
dt-bindings: power: avs: Add support for CPR (Core Power Reduction)
* pm-misc:
mailmap: Add entry for <rjw@sisk.pl>
We must not use the pointer output without validating the
success of the random read.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-8-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the expansion of these macros directly in arch_get_random_*.
These symbols are currently part of the generic archrandom.h
interface, but are currently unused and can be removed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-2-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
... and fold its function body into its single call site.
No functional changes:
# arch/x86/kernel/cpu/amd.o:
text data bss dec hex filename
5994 385 1 6380 18ec amd.o.before
5994 385 1 6380 18ec amd.o.after
md5:
99ec6daa095b502297884e949c520f90 amd.o.before.asm
99ec6daa095b502297884e949c520f90 amd.o.after.asm
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200123165811.5288-1-bp@alien8.de
We already disable KASAN instrumentation specifically for the
EFI routines that are known to dereference memory addresses that
KASAN does not know about, avoiding false positive KASAN splats.
However, as it turns out, having GCOV or KASAN instrumentation enabled
interferes with the compiler's ability to optimize away function calls
that are guarded by IS_ENABLED() checks that should have resulted in
those references to have been const-propagated out of existence. But
with instrumenation enabled, we may get build errors like:
ld: arch/x86/platform/efi/efi_64.o: in function `efi_thunk_set_virtual_address_map':
ld: arch/x86/platform/efi/efi_64.o: in function `efi_set_virtual_address_map':
in builds where CONFIG_EFI=y but CONFIG_EFI_MIXED or CONFIG_X86_UV are not
defined, even though the invocations are conditional on IS_ENABLED() checks
against the respective Kconfig symbols.
So let's disable instrumentation entirely for this subdirectory, which
isn't that useful here to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
x86_64 EFI systems are unable to boot due to a typo in a recent commit:
EFI config tables not found.
-- System halted
This was probably due to the absense of CONFIG_EFI_MIXED=y in testing.
Fixes: 796eb8d26a57 ("efi/libstub/x86: Use const attribute for efi_is_64bit()")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20200122191430.4888-1-cai@lca.pw
The current DMA alias implementation requires the aliased device be on the
same PCI bus as the requester ID. Add an arch-specific mechanism to point
to another PCI device when doing mapping and PCI DMA alias search. The
default case returns the actual device.
Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Expose VMD's pci_dev pointer in struct pci_sysdata. This will be used
indirectly by intel-iommu.c to find the correct domain.
Link: https://lore.kernel.org/r/1579613871-301529-3-git-send-email-jonathan.derrick@intel.com
[bhelgaas: commit log]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Various helpers need the pci_sysdata just to dereference a single field in
it. Add a little helper that returns the properly typed sysdata pointer to
require a little less boilerplate code.
[jonathan.derrick: to_pci_sysdata const argument]
Link: https://lore.kernel.org/r/1579613871-301529-2-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The allocation mask is no longer used by on_each_cpu_cond() and
on_each_cpu_cond_mask() and can be removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-4-bigeasy@linutronix.de
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_vcpu_uninit() in kvm_arch_vcpu_destroy() down a few
lines so that it is invoked immediately prior to freeing the vCPU. This
paves the way for moving the uninit and free sequence to common KVM code
without an associated functional change.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a bogus clearing of apf.msr_val from kvm_arch_vcpu_destroy().
apf.msr_val is only set to a non-zero value by kvm_pv_enable_async_pf(),
which is only reachable by kvm_set_msr_common(), i.e. by writing
MSR_KVM_ASYNC_PF_EN. KVM does not autonomously write said MSR, i.e.
can only be written via KVM_SET_MSRS or KVM_RUN. Since KVM_SET_MSRS and
KVM_RUN are vcpu ioctls, they require a valid vcpu file descriptor.
kvm_arch_vcpu_destroy() is only called if KVM_CREATE_VCPU fails, and KVM
declares KVM_CREATE_VCPU successful once the vcpu fd is installed and
thus visible to userspace. Ergo, apf.msr_val cannot be non-zero when
kvm_arch_vcpu_destroy() is called.
Fixes: 344d9588a9df0 ("KVM: Add PV MSR to enable asynchronous page faults delivery.")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 does not load its MMU until KVM_RUN, which cannot be invoked until
after vCPU creation succeeds. Given that kvm_arch_vcpu_destroy() is
called if and only if vCPU creation fails, it is impossible for the MMU
to be loaded.
Note, the bogus kvm_mmu_unload() call was added during an unrelated
refactoring of vCPU allocation, i.e. was presumably added as an
opportunstic "fix" for a perceived leak.
Fixes: fb3f0f51d92d1 ("KVM: Dynamically allocate vcpus")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_cpu_{un}init() calls to common x86 code as an intermediate
step to removing kvm_cpu_{un}init() altogether.
Note, VMX'x alloc_apic_access_page() and init_rmode_identity_map() are
per-VM allocations and are intentionally kept if vCPU creation fails.
They are freed by kvm_arch_destroy_vm().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the pio_data page after creating the MMU and local APIC so that
all direct memory allocations are grouped together. This allows setting
the return value to -ENOMEM prior to starting the allocations instead of
setting it in the fail path for every allocation.
The pio_data page is only consumed when KVM_RUN is invoked, i.e. moving
its allocation has no real functional impact.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocation of FPU structs is identical across VMX and SVM, move it
to common x86 code. Somewhat arbitrarily place the allocation so that
it resides directly above the associated initialization via fx_init(),
e.g. instead of retaining its position with respect to the overall vcpu
creation flow. Although the names names kvm_arch_vcpu_create() and
kvm_arch_vcpu_init() might suggest otherwise, x86 does not have a clean
split between 'create' and 'init'. Allocating the struct immediately
prior to the first use arguably improves readability *now*, and will
yield even bigger improvements when kvm_arch_vcpu_init() is removed in
a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of VMX and SVM vcpus to common x86. Although the struct
being allocated is technically a VMX/SVM struct, it can be interpreted
directly as a 'struct kvm_vcpu' because of the pre-existing requirement
that 'struct kvm_vcpu' be located at offset zero of the arch/vendor vcpu
struct.
Remove the message from the build-time assertions regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the vcpu pointer in a local varaible and replace '&svm->vcpu'
references with a direct reference to the pointer in anticipation of
moving bits of the code to common x86 and passing the vcpu pointer into
svm_create_vcpu(), i.e. eliminate unnecessary noise from future patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the vcpu pointer in a local varaible and replace '&vmx->vcpu'
references with a direct reference to the pointer in anticipation of
moving bits of the code to common x86 and passing the vcpu pointer into
vmx_create_vcpu(), i.e. eliminate unnecessary noise from future patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do VPID allocation after calling the common kvm_vcpu_init() as a step
towards doing vCPU allocation (via kmem_cache_zalloc()) and calling
kvm_vcpu_init() back-to-back. Squishing allocation and initialization
together will eventually allow the sequence to be moved to arch-agnostic
creation code.
Note, the VPID is not consumed until KVM_RUN, slightly delaying its
allocation should have no real function impact. VPID allocation was
arbitrarily placed in the original patch, commit 2384d2b326408 ("KVM:
VMX: Enable Virtual Processor Identification (VPID)").
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after
kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor.
Do the freeing by calling kvm_arch_vcpu_free() instead of open coding
the freeing. This adds a likely superfluous, but ultimately harmless,
call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled.
Using kvm_arch_vcpu_free() allows for additional cleanup in the future.
Fixes: f5f48ee15c2ee ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest is configured to have SPEC_CTRL but the host does not
(which is a nonsensical configuration but these are not explicitly
forbidden) then a host-initiated MSR write can write vmx->spec_ctrl
(respectively svm->spec_ctrl) and trigger a #GP when KVM tries to
restore the host value of the MSR. Add a more comprehensive check
for valid bits of SPEC_CTRL, covering host CPUID flags and,
since we are at it and it is more correct that way, guest CPUID
flags too.
For AMD, remove the unnecessary is_guest_mode check around setting
the MSR interception bitmap, so that the code looks the same as
for Intel.
Cc: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of MOVDIR64B instruction, there is now an instruction
that can write 64 bytes of data atomically.
Quoting from Intel SDM:
"There is no atomicity guarantee provided for the 64-byte load operation
from source address, and processor implementations may use multiple
load operations to read the 64-bytes. The 64-byte direct-store issued
by MOVDIR64B guarantees 64-byte write-completion atomicity. This means
that the data arrives at the destination in a single undivided 64-byte
write transaction."
We have identified at least 3 different use cases for this instruction in
the format of func(dst, src, count):
1) Clear poison / Initialize MKTME memory
@dst is normal memory.
@src in normal memory. Does not increment. (Copy same line to all
targets)
@count (to clear/init multiple lines)
2) Submit command(s) to new devices
@dst is a special MMIO region for a device. Does not increment.
@src is normal memory. Increments.
@count usually is 1, but can be multiple.
3) Copy to iomem in big chunks
@dst is iomem and increments
@src in normal memory and increments
@count is number of chunks to copy
Add support for case #2 to support device that will accept commands via
this instruction. We provide a @count in order to submit a batch of
preprogrammed descriptors in virtually contiguous memory. This
allows the caller to submit multiple descriptors to a device with a single
submission. The special device requires the entire 64bytes descriptor to
be written atomically and will accept MOVDIR64B instruction.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/157965022175.73301.10174614665472962675.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
This removes all the remaining (dead at this point) MPX handling
code remaining in the tree. The only remaining code is the XSAVE
support for MPX state which is currently needd for KVM to handle
VMs which might use MPX.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
arch_bprm_mm_init() is used at execve() time. The only non-stub
implementation is on x86 for MPX. Remove the hook entirely from
all architectures and generic code.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
Remove the other user-visible ABI: signal handling. This code
should basically have been inactive after the prctl()s were
removed, but there may be some small ABI remnants from this code.
Remove it.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
Remove the Kconfig option and the Makefile line. This makes
arch/x86/mm/mpx.c and anything under an #ifdef for
X86_INTEL_MPX dead code.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
While testing my MPX removal series, Borislav noted compilation
failure with an allnoconfig build.
Turned out to be a missing include of insn.h in alternative.c.
With MPX, it got it implicitly from:
asm/mmu_context.h -> asm/mpx.h -> asm/insn.h
Fixes: c3d6324f841b ("x86/alternatives: Teach text_poke_bp() to emulate instructions")
Reported-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Condense the calculation of decompressed kernel start a little.
Committer notes:
before:
ebp = ebx - (init_size - _end)
after:
eax = (ebx + _end) - init_size
where in both ebx contains the temporary address the kernel is moved to
for in-place decompression.
The before and after difference in register state is %eax and %ebp
but that is immaterial because the compressed image is not built with
-mregparm, i.e., all arguments of the following extract_kernel() call
are passed on the stack.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200107194436.2166846-1-nivedita@alum.mit.edu
Even if it's read-only, it can still be written to by userspace. Let
them know by adding it to KVM_GET_MSR_INDEX_LIST.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SPTE_MMIO_MASK overlaps with the bits used to track MMIO
generation number. A high enough generation number would overwrite the
SPTE_SPECIAL_MASK region and cause the MMIO SPTE to be misinterpreted.
Likewise, setting bits 52 and 53 would also cause an incorrect generation
number to be read from the PTE, though this was partially mitigated by the
(useless if it weren't for the bug) removal of SPTE_SPECIAL_MASK from
the spte in get_mmio_spte_generation. Drop that removal, and replace
it with a compile-time assertion.
Fixes: 6eeb4ef049e7 ("KVM: x86: assign two bits to track SPTE kinds")
Reported-by: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions are not used anywhere so drop them completely.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function is not called outside of intel_pmc_ipc.c so we can make it
static instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no user for this function so we can drop it from the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no users for these so we can remove them.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no implementation for that anymore so drop the prototype.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no existing users for this functionality so drop it from the
driver completely. This also means we don't need to keep the struct
intel_scu_ipc_pdata_t around anymore so remove that as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Previously, the assignment to the local variable 'now' took place
before the for loop. The loop is unconditional so it will be entered
at least once. The variable 'now' is reassigned in the loop and is not
used before reassigning. Therefore, the assignment before the loop is
unnecessary and can be removed.
No code changed:
# arch/x86/kernel/tsc_sync.o:
text data bss dec hex filename
3569 198 44 3811 ee3 tsc_sync.o.before
3569 198 44 3811 ee3 tsc_sync.o.after
md5:
36216de29b208edbcd34fed9fe7f7b69 tsc_sync.o.before.asm
36216de29b208edbcd34fed9fe7f7b69 tsc_sync.o.after.asm
[ bp: Massage commit message. ]
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200118171143.25178-1-mateusznosek0@gmail.com
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test
HOSTCC arch/x86/tools/insn_sanity
TEST posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
TEST posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
The emit code does optional base conversion itself in assembly, so we
don't need to do that here. Also, neither one of these functions uses
simd instructions, so checking for that doesn't make sense either.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Admist the kbuild robot induced changes, the .gitignore file for the
generated file wasn't updated with the non-clashing filename. This
commit adjusts that.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to avoid CFI function prototype mismatches, this removes the
casts on assembly implementations of sha1/256/512 accelerators. The
safety checks from BUILD_BUG_ON() remain.
Additionally, this renames various arguments for clarity, as suggested
by Eric Biggers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
