11 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
68a32ba141 |
drm for 5.13-rc1
- printk fourcc modifier support added %p4cc core: - drm_crtc_commit_wait - atomic plane state helpers reworked for full state - dma-buf heaps API rework - edid: rework and improvements for displayid dp-mst: - better topology logging bridge: - Chipone ICN6211 - Lontium LT8912B - anx7625 regulator support panel: - fix lt9611 4k panels handling simple-kms: - add plane state helpers ttm: - debugfs support - removal of unused sysfs - ignore signaled moved fences - ioremap buffer according to mem caching i915: - Alderlake S enablement - Conversion to dma_resv_locking - Bring back watchdog timeout support - legacy ioctl cleanups - add GEM TDDO and RFC process - DG1 LMEM preparation work - intel_display.c refactoring - Gen9/TGL PCH combination support - eDP MSO Support - multiple PSR instance support - Link training debug updates - Disable PSR2 support on JSL/EHL - DDR5/LPDDR5 support for bw calcs - LSPCON limited to gen9/10 platforms - HSW/BDW async flip/VTd corruption workaround = SAGV watermakr fixes - SNB hard hang on ring resume fix - Limit imported dma-buf size - move to use new tasklet API - refactor KBL/TGL/ADL-S display/gt steppings - refactoring legacy DP/HDMI, FB plane code out amdgpu: - uapi: add ioctl to query video capabilities - Iniital AMD Freesync HDMI support - Initial Adebaran support - 10bpc dithering improvements - DCN secure display support - Drop legacy IO BAR requirements - PCIE/S0ix/RAS/Prime/Reset fixes - Display ASSR support - SMU gfx busy queues for RV/PCO - Initial LTTPR display work amdkfd: - MMU notifier fixes - APU fixes radeon: - debugfs cleanps - fw error handling ifix - Flexible array cleanups msm: - big DSI phy/pll cleanup - sc7280 initial support - commong bandwidth scaling path - shrinker locking contention fixes - unpin/swap support for GEM objcets ast: - cursor plane handling reworked tegra: - don't register DP AUX channels before connectors zynqmp: - fix OOB struct padding memset gma500: - drop ttm and medfield support exynos: - request_irq cleanup function mediatek: - fine tune line time for EOTp - MT8192 dpi support - atomic crtc config updates - don't support HDMI connector creation mxsdb: - imx8mm support panfrost: -= MMU IRQ handling rework qxl: - locking fixes - resource deallocation changes sun4i: - add alpha properties to UI/VI layers vc4: - RPi4 CEC support vmwgfx: - doc cleanups arc: - moved to drm/tiny -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJgiNSVAAoJEAx081l5xIa+fvYP/1206BfOYOx5opt5K3By06ZY zrOsbeaqFdHzfUR7xVwO4vqQNhkX4Pt8H/U7uYZx8PRdrXzGENwWLIaIskyUrKOd BtwNqUr0ZXJGDlGg26StnUHKeAXuYXlpBKLta5y4LUTkI+bm6V/oVaDMq4dnah70 2CXS4C2mnaFRLBzuRlraxoGFN4eZkz6Waeyo6PJxn/l2GE2gw+jho0Yrh8e8F2w5 EjQeNF22/uHwznov03XFJlyugecuBDbE8A6Ma/znnkVdBXcT94eUMugbKOKi4Nn6 PuJOEdJxmj/9s3oi6kBERc8dvpOj0O+8Vp+xOzn2U3BVXebvu7VoJsq6FcAvL5lN ltj4iErxUlEud2GRIVUMx8OTFiKj4ThRFJ2/8Uf22r3P7RHO5E9BLnZBzqIAhDVr s2cDBMItcxcVHRCmE04h12XAO4libZBb2TVjbqG94Acq7beR76pMszFrmxPmHBEm NGe1s7+ajxMzsq/NIsk4XAhqSmJo6+ujKyyVnrgvKUVeEaWW1U4YvjhJaetnP4fB 47gF24wOSNFwiCUZlqaIpp/MR4Z8YmaJ7tayWQq4Oj/neWe/yc8xQgQIuE8GL20j P9eNQNvlBnoxkz275M9x4kVhJ5FRjr7OYnd3sFVnALuj6fnL3Z1RXLqI1lNtIz1d YM89veZuNxMaiDz8roPH =bLWZ -----END PGP SIGNATURE----- Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "The usual lots of work all over the place. i915 has gotten some Alderlake work and prelim DG1 code, along with a major locking rework over the GEM code, and brings back the property of timing out long running jobs using a watchdog. amdgpu has some Alderbran support (new GPU), freesync HDMI support along with a lot other fixes. Outside of the drm, there is a new printf specifier added which should have all the correct acks/sobs: - printk fourcc modifier support added %p4cc Summary: core: - drm_crtc_commit_wait - atomic plane state helpers reworked for full state - dma-buf heaps API rework - edid: rework and improvements for displayid dp-mst: - better topology logging bridge: - Chipone ICN6211 - Lontium LT8912B - anx7625 regulator support panel: - fix lt9611 4k panels handling simple-kms: - add plane state helpers ttm: - debugfs support - removal of unused sysfs - ignore signaled moved fences - ioremap buffer according to mem caching i915: - Alderlake S enablement - Conversion to dma_resv_locking - Bring back watchdog timeout support - legacy ioctl cleanups - add GEM TDDO and RFC process - DG1 LMEM preparation work - intel_display.c refactoring - Gen9/TGL PCH combination support - eDP MSO Support - multiple PSR instance support - Link training debug updates - Disable PSR2 support on JSL/EHL - DDR5/LPDDR5 support for bw calcs - LSPCON limited to gen9/10 platforms - HSW/BDW async flip/VTd corruption workaround - SAGV watermark fixes - SNB hard hang on ring resume fix - Limit imported dma-buf size - move to use new tasklet API - refactor KBL/TGL/ADL-S display/gt steppings - refactoring legacy DP/HDMI, FB plane code out amdgpu: - uapi: add ioctl to query video capabilities - Iniital AMD Freesync HDMI support - Initial Adebaran support - 10bpc dithering improvements - DCN secure display support - Drop legacy IO BAR requirements - PCIE/S0ix/RAS/Prime/Reset fixes - Display ASSR support - SMU gfx busy queues for RV/PCO - Initial LTTPR display work amdkfd: - MMU notifier fixes - APU fixes radeon: - debugfs cleanps - fw error handling ifix - Flexible array cleanups msm: - big DSI phy/pll cleanup - sc7280 initial support - commong bandwidth scaling path - shrinker locking contention fixes - unpin/swap support for GEM objcets ast: - cursor plane handling reworked tegra: - don't register DP AUX channels before connectors zynqmp: - fix OOB struct padding memset gma500: - drop ttm and medfield support exynos: - request_irq cleanup function mediatek: - fine tune line time for EOTp - MT8192 dpi support - atomic crtc config updates - don't support HDMI connector creation mxsdb: - imx8mm support panfrost: - MMU IRQ handling rework qxl: - locking fixes - resource deallocation changes sun4i: - add alpha properties to UI/VI layers vc4: - RPi4 CEC support vmwgfx: - doc cleanups arc: - moved to drm/tiny" * tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits) drm/ttm: Don't count pages in SG BOs against pages_limit drm/ttm: fix return value check drm/bridge: lt8912b: fix incorrect handling of of_* return values drm: bridge: fix LONTIUM use of mipi_dsi_() functions drm: bridge: fix ANX7625 use of mipi_dsi_() functions drm/amdgpu: page retire over debugfs mechanism drm/radeon: Fix a missing check bug in radeon_dp_mst_detect() drm/amd/display: Fix the Wunused-function warning drm/radeon/r600: Fix variables that are not used after assignment drm/amdgpu/smu7: fix CAC setting on TOPAZ drm/amd/display: Update DCN302 SR Exit Latency drm/amdgpu: enable ras eeprom on aldebaran drm/amdgpu: RAS harvest on driver load drm/amdgpu: add ras aldebaran ras eeprom driver drm/amd/pm: increase time out value when sending msg to SMU drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag drm/amd/pm: add the callback to get vbios bootup values for vangogh drm/radeon: Fix size overflow drm/amdgpu: Fix size overflow drm/amdgpu: move mmhub ras_func init to ip specific file ... |
||
Yangtao Li
|
864a270189 |
drm/lima: Convert to use resource-managed OPP API
Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
Christian Hewitt
|
1d048afe7e |
drm/lima: add governor data with pre-defined thresholds
This patch adapts the panfrost pre-defined thresholds change [0] to the lima driver to improve real-world performance. The upthreshold value has been set to ramp GPU frequency to max freq faster (compared to panfrost) to compensate for the lower overall performance of utgard devices. [0] https://patchwork.kernel.org/project/dri-devel/patch/20210121170445.19761-1-lukasz.luba@arm.com/ Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127194047.21462-1-christianshewitt@gmail.com |
||
Lukasz Luba
|
904beebb3e |
drm/lima: Use delayed timer as default in devfreq profile
Devfreq framework supports 2 modes for monitoring devices. Use delayed timer as default instead of deferrable timer in order to monitor the GPU status regardless of CPU idle. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127105121.20345-1-lukasz.luba@arm.com |
||
Linus Torvalds
|
b4ec805464 |
Power management updates for 5.11-rc1
- Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up ((Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/Y8mcSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxjY4QAKsNFJeEtjGCxq7MxQIML3QLAsdJM9of 9kkY9skMEw4v1TRmyy7sW9jZW2pLSRcLJwWRKWu4143qUS3YUp2DQ0lqX4WyXoWu BhnkhkMUl6iCeBO8CWnt8zsTuqSa20A13sL9LyqN1+7OZKHD8StbT4hKjBncdNNN 4aDj+1uAPyOgj2iCUZuHQ8DtpBvOLjgTh367vbhbufjeJ//8/9+R7s4Xzrj7wtmv JlE0LDgvge9QeGTpjhxQJzn0q2/H5fg9jbmjPXUfbHJNuyKhrqnmjGyrN5m256JI 8DqGqQtJpmFp7Ihrur3uKTk3gWO05YwJ1FdeEooAKEjEMObm5xuYhKVRoDhmlJAu G6ui+OAUvNR0FffJtbzvWe/pLovLGOEOHdvTrZxUF8Abo6br3untTm8rKTi1fhaF wWndSMw0apGsPzCx5T+bE7AbJz2QHFpLhaVAutenuCzNI8xoMlxNKEzsaVz/+FqL Pq/PdFaM4vNlMbv7hkb/fujkCs/v3EcX2ihzvt7I2o8dBS0D1X8A4mnuWJmiGslw 1ftbJ6M9XacwkPBTHPgeXxJh2C1yxxe5VQ9Z5fWWi7sPOUeJnUwxKaluv+coFndQ sO6JxsPQ4hQihg8yOxLEkL6Wn68sZlmp+u2Oj+TPFAsAGANIA8rJlBPo1ppJWvdQ j1OCIc/qzwpH =BVdX -----END PGP SIGNATURE----- Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ... |
||
Viresh Kumar
|
72ba9e226f |
drm/lima: dev_pm_opp_put_*() accepts NULL argument
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Reviewed-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
Viresh Kumar
|
a14d546f72 |
drm/lima: Unconditionally call dev_pm_opp_of_remove_table()
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. Reviewed-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/c995335d16d8b4b4ff47b1273869c33e14782b32.1603867405.git.viresh.kumar@linaro.org |
||
Liu Shixin
|
8f9d7ef38c |
drm/lima: simplify the return expression of lima_devfreq_target
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200919100850.1639111-1-liushixin2@huawei.com |
||
Qiang Yu
|
4836cf044d |
drm/lima: add lima_devfreq_resume/suspend
Used for device resume/suspend in the following commits. Tested-by: Bhushan Shah <bshah@kde.org> Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200421133551.31481-6-yuq825@gmail.com |
||
Robin Murphy
|
2ce216edf2 |
drm/lima: Clean up redundant pdev pointer
There's no point explicitly tracking the platform device when it can be trivially derived from the regular device pointer in the couple of places it's ever used. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/8d9073cc91c10fc70910587fd1794e0e8f32b467.1587509150.git.robin.murphy@arm.com |
||
Martin Blumenstingl
|
1996970773 |
drm/lima: Add optional devfreq and cooling device support
Most platforms with a Mali-400 or Mali-450 GPU also have support for changing the GPU clock frequency. Add devfreq support so the GPU clock rate is updated based on the actual GPU usage when the "operating-points-v2" property is present in the board.dts. The actual devfreq code is taken from panfrost_devfreq.c and modified so it matches what the lima hardware needs: - a call to dev_pm_opp_set_clkname() during initialization because there are two clocks on Mali-4x0 IPs. "core" is the one that actually clocks the GPU so we need to control it using devfreq. - locking when reading or writing the devfreq statistics because (unlike than panfrost) we have multiple PP and GP IRQs which may finish jobs concurrently. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319203427.2259891-3-martin.blumenstingl@googlemail.com |