IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Kurt Kanzenbach says:
====================
Hirschmann Hellcreek DSA driver
this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:
* Full duplex Ethernet interface at 100/1000 Mbps on three ports
* IEEE 802.1Q-compliant Ethernet Switch
* IEEE 802.1Qbv Time-Aware scheduling support
* IEEE 1588 and IEEE 802.1AS support
That IP is used e.g. in
https://www.arrow.com/en/campaigns/arrow-kairos
Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP and
hardware timestamping.
This work is part of the AccessTSN project: https://www.accesstsn.com/
The previous versions can be found here:
* https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200820081118.10105-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200901125014.17801-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200904062739.3540-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20201004112911.25085-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20201028074221.29326-1-kurt@linutronix.de/
Changes since v7:
* Simplify tagging code (rebase to net-next)
* Pass info instead of ptr (Florian Fainelli)
* Fix yamllint warnings (Rob Herring)
Changes since v6:
* Add .tail_tag = true (Vladimir Oltean)
* Fix vlan_filtering=0 bridges (Vladimir Oltean)
* Enforce restrictions (Vladimir Oltean)
* Sort stuff alphabetically (Vladimir Oltean)
* Rename hellcreek.yaml to hirschmann,hellcreek.yaml
* Typo fixes
Changes since v5:
* Implement configure_vlan_while_not_filtering behavior (Vladimir Oltean)
* Minor cleanups
Changes since v4:
* Fix W=1 compiler warnings (kernel test robot)
* Add tags
Changes since v3:
* Drop TAPRIO support (David Miller)
=> Switch to mutexes due to the lack of hrtimers
* Use more specific compatible strings and add platform data (Andrew Lunn)
* Fix Kconfig ordering (Andrew Lunn)
Changes since v2:
* Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller)
* Use "tsn" for TSN register set (Rob Herring)
* Fix DT binding issues (Rob Herring)
Changes since v1:
* Code simplifications (Florian Fainelli, Vladimir Oltean)
* Fix issues with hellcreek.yaml bindings (Florian Fainelli)
* Clear reserved field in ptp v2 event messages (Richard Cochran)
* Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
* Fix Kconfig (Florian Fainelli)
* Add tags (Florian Fainelli, Rob Herring, Richard Cochran)
Changes since RFC ordered by reviewers:
* Andrew Lunn
* Use dev_dbg for debug messages
* Get rid of __ function names where possible
* Use reverse xmas tree variable ordering
* Remove redundant/useless checks
* Improve comments e.g. for PTP
* Fix Kconfig ordering
* Make LED handling more generic and provide info via DT
* Setup advertisement of PHYs according to hardware
* Drop debugfs patch
* Jakub Kicinski
* Fix compiler warnings
* Florian Fainelli
* Switch to YAML DT bindings
* Richard Cochran
* Fix typo
* Add missing NULL checks
====================
Link: https://lore.kernel.org/r/20201103071101.3222-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hirschmann is building devices for automation and networking. Add them to the
vendor prefixes.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch has two controllable I/Os which are usually connected to LEDs. This
is useful to immediately visually see the PTP status.
These provide two signals:
* is_gm
This LED can be activated if the current device is the grand master in that
PTP domain.
* sync_good
This LED can be activated if the current device is in sync with the network
time.
Expose these via the LED framework to be controlled via user space
e.g. linuxptp.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch has the ability to take hardware generated time stamps per port for
PTPv2 event messages in Rx and Tx direction. That is useful for achieving needed
time synchronization precision for TSN devices/switches. So add support for it.
There are two directions:
* RX
The switch has a single register per port to capture a timestamp. That
mechanism is not used due to correlation problems. If the software processing
is too slow and a PTPv2 event message is received before the previous one has
been processed, false timestamps will be captured. Therefore, the switch can
do "inline" timestamping which means it can insert the nanoseconds part of
the timestamp directly into the PTPv2 event message. The reserved field (4
bytes) is leveraged for that. This might not be in accordance with (older)
PTP standards, but is the only way to get reliable results.
* TX
In Tx direction there is no correlation problem, because the software and the
driver has to ensure that only one event message is "on the fly". However,
the switch provides also a mechanism to check whether a timestamp is
lost. That can only happen when a timestamp is read and at this point another
message is timestamped. So, that lost bit is checked just in case to indicate
to the user that the driver or the software is somewhat buggy.
Signed-off-by: Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch has internal PTP hardware clocks. Add support for it. There are three
clocks:
* Synchronized
* Syntonized
* Free running
Currently the synchronized clock is exported to user space which is a good
default for the beginning. The free running clock might be exported later
e.g. for implementing 802.1AS-2011/2020 Time Aware Bridges (TAB). The switch
also supports cross time stamping for that purpose.
The implementation adds support setting/getting the time as well as offset and
frequency adjustments. However, the clock only holds a partial timeofday
timestamp. This is why we track the seconds completely in software (see overflow
work and last_ts).
Furthermore, add the PTP multicast addresses into the FDB to forward that
packages only to the CPU port where they are processed by a PTP program.
Signed-off-by: Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a basic DSA driver for Hirschmann Hellcreek switches. Those switches are
implementing features needed for Time Sensitive Networking (TSN) such as support
for the Time Precision Protocol and various shapers like the Time Aware Shaper.
This driver includes basic support for networking:
* VLAN handling
* FDB handling
* Port statistics
* STP
* Phylink
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some switches rely on unique pvids to ensure port separation in
standalone mode, because they don't have a port forwarding matrix
configurable in hardware. So, setups like a group of 2 uppers with the
same VLAN, swp0.100 and swp1.100, will cause traffic tagged with VLAN
100 to be autonomously forwarded between these switch ports, in spite
of there being no bridge between swp0 and swp1.
These drivers need to prevent this from happening. They need to have
VLAN filtering enabled in standalone mode (so they'll drop frames tagged
with unknown VLANs) and they can only accept an 8021q upper on a port as
long as it isn't installed on any other port too. So give them the
chance to veto bad user requests.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[Kurt: Pass info instead of ptr]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Hirschmann Hellcreek TSN switches have a special tagging protocol for frames
exchanged between the CPU port and the master interface. The format is a one
byte trailer indicating the destination or origin port.
It's quite similar to the Micrel KSZ tagging. That's why the implementation is
based on that code.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's possible that the first region picked for the new kernel will make
it impossible to fit the other segments in the required 32GB window,
especially if we have a very large initrd.
Instead of giving up, we can keep testing other regions for the kernel
until we find one that works.
Suggested-by: Ryan O'Leary <ryanoleary@google.com>
Signed-off-by: Benjamin Gwin <bgwin@google.com>
Link: https://lore.kernel.org/r/20201103201106.2397844-1-bgwin@google.com
Signed-off-by: Will Deacon <will@kernel.org>
mlx5_eq_async_int() uses in_irq() to decide whether eq::lock needs to be
acquired and released with spin_[un]lock() or the irq saving/restoring
variants.
The usage of in_*() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
seperated or the context be conveyed in an argument passed by the caller,
which usually knows the context.
mlx5_eq_async_int() knows the context via the action argument already so
using it for the lock variant decision is a straight forward replacement
for in_irq().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
$ git ls-files *.[ch] | egrep drivers/net/ethernet/mellanox/ | \
xargs scripts/kernel-doc -none
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:57:
warning: Enum value 'MLX5_FPGA_ACCESS_TYPE_I2C' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:57:
warning: Enum value 'MLX5_FPGA_ACCESS_TYPE_DONTCARE' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:118:
warning: Function parameter or member 'cb_arg' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:160:
warning: Function parameter or member 'conn' not described ...
drivers/net/ethernet/mellanox/mlx5/core/fpga/sdk.h:160:
warning: Excess function parameter 'fdev' description ...
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Stop room is a space that may be taken by WQEs in the SQ during a packet
transmit. It is used to check if next packet has enough room in the SQ.
Stop room guarantees this packet can be served and if not, the queue is
stopped, so no more packets are passed to the driver until it's ready.
Currently, stop_room size is calculated and validated upon tx queues
allocation. This makes it impossible to know if user provided valid
input for certain parameters when interface is down.
Instead, store stop_room in mlx5e_sq_param and create
mlx5e_validate_params(), to validate its fields upon user input even
when the interface is down.
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Track buddy's used ICM memory, and free it if all
of the buddy's memory bacame unused.
Do this only for STEs.
MODIFY_ACTION buddies are much smaller, so in case there
is a large amount of modify_header actions, which result
in large amount of MODIFY_ACTION buddies, doing this
cleanup during sync will result in performance hit while
not freeing significant amount of memory.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Track the pool's hot ICM memory when freeing/allocating
chunk, so that when checking if the sync is required, just
check if the pool hot memory has reached the sync threshold.
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When freeing chunks, we want to sync the steering
so that all the "hot" memory will be written to ICM
and all the chunks that are in the hot_list will be
actually destroyed.
When allocating from the pool, we don't have a need
to sync the steering, as we're not freeing anything,
and sync might just hurt the performance in terms of
flow-per-second offloaded.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Till now in order to manage the ICM memory we used bucket
mechanism, which kept a bucket per specified size (sizes were
between 1 block to 2^21 blocks).
Now changing that with buddy-system mechanism, which gives us much
more flexible way to manage the ICM memory.
Its biggest advantage over the bucket is by using the same ICM memory
area for all the sizes of blocks, which reduces the memory consumption.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add implementation of SW Steering variation of buddy allocator.
The buddy system for ICM memory uses 2 main data structures:
- Bitmap per order, that keeps the current state of allocated
blocks for this order
- Indicator for the number of available blocks per each order
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove flex parser from the matcher function names since
the matcher should not be aware of such HW specific details.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We will support multiple STE versions.
The existing naming is not suitable for newer versions.
Removed the HW specific details and renamed with a more
general names.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This Kunit update for Linux 5.10-rc3 consists of several kunit_tool
and documentation fixes.
-----BEGIN PGP SIGNATURE-----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=2gLZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several kunit_tool and documentation fixes"
* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tools: fix kunit_tool tests for parsing test plans
Documentation: kunit: Update Kconfig parts for KUNIT's module support
kunit: test: fix remaining kernel-doc warnings
kunit: Don't fail test suites if one of them is empty
kunit: Fix kunit.py --raw_output option
- Fix off-by-one error in retrieving the context buffer for trace_printk()
- Fix off-by-one error in stack nesting limit
- Fix recursion to not make all NMI code false positive as recursing
- Stop losing events in function tracing when transitioning between irq context
- Stop losing events in ring buffer when transitioning between irq context
- Fix return code of error pointer in parse_synth_field() to prevent
NULL pointer dereference.
- Fix false positive of NMI recursion in kprobe event handling
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX6QqmRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWiAQCKf3xblmQDcge2BLQPy2H7ih5VCSSb
vDPrQKgLa35pSgEAhGj7mgAKxb6kDbae1BqPorfa/qn9Bi13XfRNTxBK2Qw=
=zKfd
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix off-by-one error in retrieving the context buffer for
trace_printk()
- Fix off-by-one error in stack nesting limit
- Fix recursion to not make all NMI code false positive as recursing
- Stop losing events in function tracing when transitioning between irq
context
- Stop losing events in ring buffer when transitioning between irq
context
- Fix return code of error pointer in parse_synth_field() to prevent
NULL pointer dereference.
- Fix false positive of NMI recursion in kprobe event handling
* tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Tell lockdep about kprobe nesting
tracing: Make -ENOMEM the default error for parse_synth_field()
ring-buffer: Fix recursion protection transitions between interrupt context
tracing: Fix the checking of stackidx in __ftrace_trace_stack
ftrace: Handle tracing when switching between context
ftrace: Fix recursion check for NMI test
tracing: Fix out of bounds write in get_trace_buf
A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer in
rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target
-----BEGIN PGP SIGNATURE-----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=y+a3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
A small collection of driver specific fixes that have come in since the
merge window, nothing too major here but all good to ahve.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBdoACgkQJNaLcl1U
h9D5HAf/Znx8CshbXBUXAOlO2FnRBN6OsJk7jRoyL4+r+z76nO689CjXB1a2vbND
adKj2ifYthylkt+kLiiG2H48hHmb6Yceqz9fXz7++IU9UF1ozXhwebbsj03pd1jV
/UHREWeLZRf5x0AkQcNusXbcWNc4cuiFTAHigUS/+NJs3rzX3LEaQ8EazymIuAzU
zS0EY6+yYpOctzdJ624IaHtBbrF7z8io83HR458Br+jArRrbmeWB9GbKaqgp2yLu
t37mapV9OZd9er/wdJ+dNY5CAzQ8YYpVdth+6aCwQKA0ZuKTG5Y6+QD75EsTlHuR
d8aMzf4/GCszYWqLu6hayCa6iD4SAQ==
=4bPG
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes that have come in since
the merge window, nothing too major here but all good to have"
* tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-dspi: fix wrong pointer in suspend/resume
spi: bcm2835: fix gpio cs level inversion
spi: imx: fix runtime pm support for !CONFIG_PM
An addition to MAINTAINERS plus a fix for a nasty bootstrapping problem
which caused problems when we need to read the voltage of a regulator
that is not yet available during initialization, we were not correctly
distinguishing between this case and the case where a regulator is put
into a bypass mode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBncACgkQJNaLcl1U
h9DHMQf9FzSHbhdl2h3d0quiZF88H4ukXgkHRJJeqCsVv7kTekGgui3KEB19x5+3
rATP2AMt9aF9bG9YCWt2VazrbvJQ7hSmHq9NlrbaM2UZJW/12lKJ6v33xJWSxhTl
kGPhNirbNaxZ1B4SJJiiBX59puSTbaOj9JwI9MlR+8gxqE+Mk42Qz2UHNUINB3At
g9zuHXts+Iure4D18vBZcu/Vcrs3x8HMYtYsZgskT6fgvt/AsHCQ8yYUP6sB2EIN
h7msMvAxSwAGOBcLx6wDM3azcxz5SvAr5WeoXaMrDfUMWH2TGlTuIVhq4uXqrAVu
twG4JNCLV66YE4gILSGu7FdRauOOfg==
=0T87
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"An addition to MAINTAINERS plus a fix for a nasty bootstrapping
problem which caused problems when we need to read the voltage of a
regulator that is not yet available during initialization, we were not
correctly distinguishing between this case and the case where a
regulator is put into a bypass mode"
* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: defer probe when trying to get voltage from unresolved supply
MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy
limits updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal
of OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping
driver (Tom Rix).
-----BEGIN PGP SIGNATURE-----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=lKQA
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
Recent refactoring of memblock iterators has broken initialization of
highmem on arm and xtensa because it changed the way beginning and end of
memory regions are rounded to PFNs. This fix restores the original
behaviour.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl+j9K0THHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kbLGB/9ZQyGJaLz70dOFF2St5ei1QMsBboLW
WWZYdRsuLnRfXkBxgQp2D60pE6NxP8A61Wuq5Qa8iE7GjXwlTmCiMZPAB1N15zZ5
DhDR6O6douu5EPvdpX3cFtHRCVRCYFDcX1ovm2AaODLlM4jLuHuTHE4OxLAaTsTV
4vLOOMSTfFcm95gEn7yogC+NuwQxdYErNBNe36Yy+TFaxQYy63+hMgpLRAJqkRnV
SzIs8ur1R2i5Z/QDFh3JZO6kEY78qSgrT0ubc7G9/29qS5uvg3MmiJdqnUvQlDt7
ClttZKv731RsWnyf6HgdWSKet8w68T84Jegn9/zKnVBStwNYkx2KkwNH
=p+K2
-----END PGP SIGNATURE-----
Merge tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull highmem initialization fix from Mike Rapoport:
"Fix highmem initialization on arm and xtensa
Recent refactoring of memblock iterators has broken initialization of
highmem on arm and xtensa because it changed the way beginning and end
of memory regions are rounded to PFNs. This fix restores the original
behaviour"
* tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations
-----BEGIN PGP SIGNATURE-----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=8z2V
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Wake up when sd_glock_disposal becomes zero
gfs2: Don't call cancel_delayed_work_sync from within delete work function
gfs2: check for live vs. read-only file system in gfs2_fitrim
gfs2: don't initialize statfs_change inodes in spectator mode
gfs2: Split up gfs2_meta_sync into inode and rgrp versions
gfs2: init_journal's undo directive should also undo the statfs inodes
gfs2: Add missing truncate_inode_pages_final for sd_aspace
gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free
A batch of driver specific fixes that have come up since the merge
window, nothing particularly major here but all good to have.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBYgACgkQJNaLcl1U
h9BDHQf9HDn/narvcVdfCBdWI0uI/P5sETaQUw69J1PquiCtn8P2MzyaIofTGJbX
IiWEQE+Z1FnUgcs/KAQwKuvlp5UQ+L/6VlTPATgxEOcnNb82rN1riJjHI4C+5UXj
+KShaJy0afLcva3HL1NOuzUPvj1TZ+j07JiW7uqhEd3H/+O3VlXvUFWlZeXcDiNn
5hd+r4fKybfYrydR/kpE2JBW7E+0JhcOgztBhw/p3K0js+ovaDolSDVgonwcOtPE
/yDhISEkSzQ7wWYc4FjROryQJ5e4HtLEc9RumiqHVDXVg51uT3z8U/aEttlXVKR9
lEGZw+xNlnqDi/LDqYvJn1CER6iklw==
=Pe6G
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A batch of driver specific fixes that have come up since the merge
window, nothing particularly major here but all good to have.
Allow user to request action terse dump with new flag value
TCA_FLAG_TERSE_DUMP. Only output essential action info in terse dump (kind,
stats, index and cookie, if set by the user when creating the action). This
is different from filter terse dump where index is excluded (filter can be
identified by its own handle).
Move tcf_action_dump_terse() function to the beginning of source file in
order to call it from tcf_dump_walker().
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20201102201243.287486-1-vlad@buslov.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a178628 ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104115717.GA19046@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
1) Move existing bridge packet reject infra to nf_reject_{ipv4,ipv6}.c
from Jose M. Guisado.
2) Consolidate nft_reject_inet initialization and dump, also from Jose.
3) Add the netdev reject action, from Jose.
4) Allow to combine the exist flag and the destroy command in ipset,
from Joszef Kadlecsik.
5) Expose bucket size parameter for hashtables, also from Jozsef.
6) Expose the init value for reproducible ipset listings, from Jozsef.
7) Use __printf attribute in nft_request_module, from Andrew Lunn.
8) Allow to use reject from the inet ingress chain.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
netfilter: nft_reject_inet: allow to use reject from inet ingress
netfilter: nftables: Add __printf() attribute
netfilter: ipset: Expose the initval hash parameter to userspace
netfilter: ipset: Add bucketsize parameter to all hash types
netfilter: ipset: Support the -exist flag with the destroy command
netfilter: nft_reject: add reject verdict support for netdev
netfilter: nft_reject: unify reject init and dump into nft_reject
netfilter: nf_reject: add reject skbuff creation helpers
====================
Link: https://lore.kernel.org/r/20201104141149.30082-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says:
====================
mptcp: Miscellaneous MPTCP fixes
This is a collection of small fixup and minor enhancement patches that
have accumulated in the MPTCP tree while net-next was closed. These are
prerequisites for larger changes we have queued up.
Patch 1 refines receive buffer autotuning.
Patches 2 and 4 are some minor locking and refactoring changes.
Patch 3 improves GRO and RX coalescing with MPTCP skbs.
Patches 5-7 add a sysctl for tuning ADD_ADDR retransmission timeout,
corresponding test code, and documentation.
v2: Add sysctl documentation and fix signoff tags.
====================
Link: https://lore.kernel.org/r/20201103190509.27416-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.
Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.
We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.
Since we added the netfilter rules in this test case, we need to update
the "config" file.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe the two MPTCP sysctls, what the values mean, and the default
settings.
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new sysctl, named add_addr_timeout, to control the
timeout value (in seconds) of the ADD_ADDR retransmission.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_clean_una() will wake writers in case memory could be reclaimed.
When called from mptcp_sendmsg the wakeup code isn't needed.
Move the wakeup to a new helper and then use that from the mptcp worker.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the TCP stack splits a packet on the write queue, the tail
half currently lose the associated skb extensions, and will not
carry the DSM on the wire.
The above does not cause functional problems and is allowed by
the RFC, but interact badly with GRO and RX coalescing, as possible
candidates for aggregation will carry different TCP options.
This change tries to improve the MPTCP behavior, propagating the
skb extensions on split.
Additionally, we must prevent the MPTCP stack from updating the
mapping after the split occur: that will both violate the RFC and
fool the reader.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function is short and won't sleep, so this can use the _fast version.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to tcp autotuning during read, it may also increase the
receive buffer in tcp_clamp_window().
In this case, mptcp should adjust its receive buffer size as well so
it can move all pending skbs from the subflow socket to the mptcp socket.
At this time, TCP can have more skbs ready for processing than what the
mptcp receive buffer size allows.
In the mptcp case, the receive window announced is based on the free
space of the mptcp parent socket instead of the individual subflows.
Following the subflow allows mptcp to grow its receive buffer.
This is especially noticeable for loopback traffic where two skbs are
enough to fill the initial receive window.
In mptcp_data_ready() we do not hold the mptcp socket lock, so modifying
mptcp_sk->sk_rcvbuf is racy. Do it when moving skbs from subflow to
mptcp socket, both sockets are locked in this case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes: 0439297be9 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx checksumming has been defeatured and completely removed
from the h/w reference manual. Made a little cleanup for the
TSE case as this is complementary code.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201103140213.3294-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
