IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In the same spirit as commit f1cf4f93de2f ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit e68c825bb016 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit 662bbcb2747c ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu
call_do_irq() and call_do_softirq() are simple enough to be
worth inlining.
Inlining them avoids an mflr/mtlr pair plus a save/reload on stack.
This is inspired from S390 arch. Several other arches do more or
less the same. The way sparc arch does seems odd thought.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210320122227.345427-1-mpe@ellerman.id.au
Sparse warns:
warning: symbol 'rfi_flush' was not declared.
warning: symbol 'entry_flush' was not declared.
warning: symbol 'uaccess_flush' was not declared.
Define 'entry_flush' and 'uaccess_flush' as static because they are
not referenced outside the file. Include asm/security_features.h in
which 'rfi_flush' is declared.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316041148.29694-1-heying24@huawei.com
arch/powerpc/kernel/iommu.c:76:2-16: WARNING: NULL check before some freeing functions is not needed.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: 691602aab9c3 ("powerpc/iommu/debug: Add debugfs entries for IOMMU tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318234441.GA63469@f8e20a472e81
Section mismatch in reference from the function .smp_setup_pacas() to
the function .init.text:.allocate_paca()
The only caller of smp_setup_pacas() is setup_arch() which is __init,
so mark smp_setup_pacas() __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093333.132657-1-mpe@ellerman.id.au
The build fails with CONFIG_PROC_FS=n:
arch/powerpc/kernel/eeh.c:1571:12: error: ‘proc_eeh_show’ defined but not used
1571 | static int proc_eeh_show(struct seq_file *m, void *v)
Wrap proc_eeh_show() in an ifdef to avoid it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210314093300.131998-1-mpe@ellerman.id.au
Commit aac6a91fea93 ("powerpc/asm: Remove unused symbols in
asm-offsets.c") removed GPR15 to GPR31 but kept GPR14,
probably because it pops up in a couple of comments when doing
a grep.
However, it was never used either, so remove it as well.
Fixes: aac6a91fea93 ("powerpc/asm: Remove unused symbols in asm-offsets.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9881c68fbca004f9ea18fc9473f630e11ccd6417.1615806071.git.christophe.leroy@csgroup.eu
Sparse reports the following problems:
arch/powerpc/math-emu/math.c:228:21: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:31: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:41: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:228:51: warning: Using plain integer as NULL pointer
arch/powerpc/math-emu/math.c:237:13: warning: incorrect type in initializer (different address spaces)
arch/powerpc/math-emu/math.c:237:13: expected unsigned int [noderef] __user *_gu_addr
arch/powerpc/math-emu/math.c:237:13: got unsigned int [usertype] *
arch/powerpc/math-emu/math.c:226:1: warning: symbol 'do_mathemu' was not declared. Should it be static?
Add missing __user qualifier when casting pointer used in get_user()
Use NULL instead of 0 to initialise opX local variables.
Add a prototype for do_mathemu() (Added in processor.h like sparc)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e4d1aae7604d89c98a52dfd8ce8443462e595670.1615809591.git.christophe.leroy@csgroup.eu
In preparation of porting powerpc32 to C syscall entry/exit,
rename kuap_check_amr() and kuap_get_and_check_amr() as
kuap_assert_locked() and kuap_get_and_assert_locked(), and move in the
generic asm/kup.h the stub for when CONFIG_PPC_KUAP is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f82614d9b17b83abd739aa18fc08811815d0c2e3.1615552867.git.christophe.leroy@csgroup.eu
Save non volatile registers, XER, CTR, MSR and NIP in exception prolog.
Also assign proper value to r2 and r3 there.
For now, recalculate thread pointer in prepare_transfer_to_handler.
It will disappear once KUAP is ported to C.
And remove the comment which is now completely wrong.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/56f0cde9dd0362edf2ddba4d887552013eee7329.1615552867.git.christophe.leroy@csgroup.eu
Exception prologs all do the same at the end:
- Save trapno in stack
- Mark stack with exception marker
- Save r0
- Save r3 to r8
Refactor that into a COMMON_EXCEPTION_PROLOG_END macro.
At the same time use r1 instead of r11.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e1c45d2e895e0693c42d2a6840df1105a148efea.1615552867.git.christophe.leroy@csgroup.eu
In order to get more control in exception prolog, dismantle
all non standard exception macros, finishing with EXC_XFER_STD
and EXC_XFER_LITE and EXC_XFER_TEMPLATE.
Also remove transfer_to_handler_full and ret_from_except and
ret_from_except_full as they are not used anymore.
Last parameter of EXCEPTION() is now ignored, will be removed
in a later patch to avoid too much churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca5795d04a220586b7037dbbbe6951dfa9e768eb.1615552867.git.christophe.leroy@csgroup.eu
Until now, non volatile registers were restored everytime they
were saved, ie using EXC_XFER_STD meant saving and restoring
them while EXC_XFER_LITE meant neither saving not restoring them.
Now that they are always saved, EXC_XFER_STD means to restore
them and EXC_XFER_LITE means to not restore them.
Most of the users of EXC_XFER_STD only need to retrieve the
non volatile registers. For them there is no need to restore
the non volatile registers as they have not been modified.
Only very few exceptions require non volatile registers restore.
Opencode the few places which require saving of non volatile
registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1cb12d8023cc6afc1f07150565571373c04945c.1615552867.git.christophe.leroy@csgroup.eu
In order to increase flexibility, add a macro that will for now
call transfer_to_handler.
As transfer_to_handler doesn't do the actual transfer anymore,
also name it prepare_transfer_to_handler. The following patches
will progressively remove the use of transfer_to_handler label.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f757c52518ab1d7b27ad5113b10f860e803f467.1615552867.git.christophe.leroy@csgroup.eu
Since commit 06d67d54741a ("powerpc: make process.c suitable for both
32-bit and 64-bit"), thread.regs is set on task creation, no need to
set it again and again at each interrupt entry as it never change.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20d52c627303d63e461797df13e6890fc04017d0.1615552867.git.christophe.leroy@csgroup.eu
Now that the MMU is re-enabled before calling the transfer function,
we don't need anymore that hack with the address of the handler and
the return function sitting just after the 'bl' to the transfer
fonction, that function is retrieving via a read relative to 'lr'.
Do a regular call to the transfer function, then to the handler,
then branch to the return function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/73c00f3361ca280ef8fd7814c291bd1f5b6e2081.1615552867.git.christophe.leroy@csgroup.eu
Refactor booke critical registers saving into a few macros
and move it into the exception prolog directly.
Keep the dedicated transfert_to_handler entry point for the
moment allthough they are empty. They will be removed in a
later patch to reduce churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/269171496f1f5f22afa621695bded22976c9d48d.1615552867.git.christophe.leroy@csgroup.eu
The space in the head section is rather constrained by the fact that
exception vectors are spread every 0x100 bytes and sometimes we
need to have "out of line" code because it doesn't fit.
Now that we are enabling MMU early in the prolog, take that opportunity
to jump somewhere else in the .text section where we don't have any
space constraint.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38b31ca4bc782a4985bc7952a675404d7ff27c24.1615552867.git.christophe.leroy@csgroup.eu
For consistency, add in the macro the label used by exception prolog
to branch to stack overflow processing.
While at it, enclose the macro in #ifdef CONFIG_VMAP_STACK on the 8xx
as already done on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf80056f5b946572ad98aea9d915dd25b23beda6.1615552867.git.christophe.leroy@csgroup.eu
The check of the emergency context initialisation in
vmap_stack_overflow is buggy for the SMP case, as it
compares r1 with 0 while in the SMP case r1 is offseted
by the CPU id.
Instead of fixing it, just perform static initialisation
of the first emergency context.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu
On 40x and 8xx, kernel text is pinned.
On book3s/32, kernel text is mapped by BATs.
Enable instruction translation at the same time as data translation, it
makes things simpler.
In syscall handler, MSR_RI can also be set at the same time because
srr0/srr1 are already saved and r1 is set properly.
On booke, translation is always on, so at the end all PPC32
have translation on early. Just update msr.
Also update comment in power_save_ppc32_restore().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5269c7e5f5d2117358af3a89744d75a116be27b0.1615552867.git.christophe.leroy@csgroup.eu
8xx requires to tag the DAR with a magic value in order to
fixup DAR on faults generated by 'dcbX', as the 8xx
forgets to update the DAR for those faults.
Do the tagging as early as possible, that is before enabling MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/853a2e28ca7c5fc85617037030f99fe6070c9536.1615552867.git.christophe.leroy@csgroup.eu
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32.
That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.
While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu
ksp_limit is there to help detect stack overflows.
That is specific to ppc32 as it was removed from ppc64 in
commit cbc9565ee826 ("powerpc: Remove ksp_limit on ppc64").
There are other means for detecting stack overflows.
As ppc64 has proven to not need it, ppc32 should be able to do
without it too.
Lets remove it and simplify exception handling.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d789c3385b22e07bedc997613c0d26074cb513e7.1615552866.git.christophe.leroy@csgroup.eu
