IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently all platforms are assumed allot 8 routing table entries
for use by the modem. Instead, add a new configuration data entry
that defines the number of modem routing table entries, and record
that in the IPA structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some source files state copyright dates that are earlier than the
last modification of the file. Change the copyright year to 2022 in
all such cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Update a few comments for clarity.
Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ipa_qmi_ready(), the "ipa" local variable is set when
initialized, but then set again just before it's first used.
One or the other is enough, so get rid of the first one.
References: https://lore.kernel.org/lkml/200de1bd-0f01-c334-ca18-43eed783dfac@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The functions ipa_modem_setup() and ipa_modem_teardown() are trivial
wrappers that call ipa_qmi_setup() and ipa_qmi_teardown(). Just
call the QMI functions directly, and get rid of the wrappers.
Improve the documentation of what setting up QMI does.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new function that abstracts finding information about a
region in IPA-local memory, given its memory region ID. For now it
simply uses the region ID as an index into the IPA memory array.
If the region is not defined, ipa_mem_find() returns a null pointer.
Update all code that accesses the ipa->mem[] array directly to use
ipa_mem_find() instead. The return value must be checked for null
when optional memory regions are sought.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Entries in an IPA route or filter table are 64-bit little-endian
addresses, each of which refers to a routing or filtering rule.
The format of these table slots are fixed, but IPA_TABLE_ENTRY_SIZE
is used to define their size. This symbol doesn't really add value,
and I think it unnecessarily obscures what a table entry *is*.
So get rid of IPA_TABLE_ENTRY_SIZE, and just use sizeof(__le64) in
its place throughout the code.
Update the comments in "ipa_table.c" to provide a little better
explanation of these table slots.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify conditional tests throughout the IPA code so they do not
assume that IPA v3.5.1 is the oldest version supported. Also remove
assumptions that IPA v4.5 is the newest version of IPA supported.
Augment versions in comments with "+", to be clearer that the
comment applies to a version and subsequent versions. (E.g.,
"present for IPA v4.2+" instead of just "present for v4.2".)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several memory regions that are defined starting with IPA
v4.0, but which were not used for the SC7180 SoC (IPA v4.2). Even
though they're not used (yet), define them so they are ready to be
used for SoCs when they become supported.
There are two QUOTA statistics memory regions, one for the modem and
one for the AP. Define distinct names for these regions, and get
rid of the definition of IPA_MEM_STATS_QUOTA.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a QMI handle is initialized, an array of message handler
structures is provided, defining how any received message should
be handled based on its type and message ID. The QMI core code
traverses this array when a message arrives and calls the function
associated with the (type, msg_id) found in the array.
The array is supposed to be terminated with an empty (all zero)
entry though. Without it, an unsupported message will cause
the QMI core code to go past the end of the array.
Fix this bug, by properly terminating the message handler arrays
provided when QMI handles are set up by the IPA driver.
Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications")
Reported-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are only used as input arguments to qmi_handle_init() which
accepts const pointers to both qmi_ops and qmi_msg_handler. Make them
const to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201122234031.33432-2-rikard.falkeborn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements two forms of out-of-band communication between
the AP and modem.
- QMI is a mechanism that allows clients running on the AP
interact with services running on the modem (and vice-versa).
The AP IPA driver uses QMI to communicate with the corresponding
IPA driver resident on the modem, to agree on parameters used
with the IPA hardware and to ensure both sides are ready before
entering operational mode.
- SMP2P is a more primitive mechanism available for the modem and
AP to communicate with each other. It provides a means for either
the AP or modem to interrupt the other, and furthermore, to provide
32 bits worth of information. The IPA driver uses SMP2P to tell
the modem what the state of the IPA clock was in the event of a
crash. This allows the modem to safely access the IPA hardware
(or avoid doing so) when a crash occurs, for example, to access
information within the IPA hardware.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
