IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As per the HDCP2.2 compliance test 1B-10 expectation, when stream
management for a repeater fails, we retry thrice and when it fails
in all retries, HDCP2.2 reauthentication aborted at kernel.
v2:
seq_num_m++ is extended for steam management failures too.[Anshuman]
v3:
use drm_dbg_kms instead of DRM_DEBUG_KMS [Anshuman]
v4:
dev_priv is used as i915 [JaniN]
v5:
Few improvisements are done [Sean]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923132435.17039-2-anshuman.gupta@intel.com
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce275 ("drm/dp: Add drm_dp_downstream_mode()")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-3-lyude@redhat.com
As warned by kernel-doc:
./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type'
./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode'
Some function parameters weren't documented.
Fixes: 38784f6f8805 ("drm/dp: Add helpers to identify downstream facing port types")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-2-lyude@redhat.com
Since we now have proper old and new cdclk state we no longer
need to keep this flag to indicate that the force min cdclk has
changed. Instead just check if the old vs. new value are different.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
For platforms that can't do native 4:2:0 outout we may still be
able to do it by getting the DP->HDMI protocol converter to
perform the 4:4:4->4:2:0 downsamling for us. In this case we
have to configure our hardware to output YCbCr 4:4:4, which we've
already hooked up so all we need to do is flip the switch.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-19-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Account for the TMDS clock limits declared by the DFP
when determining what color depth we're going to use.
v2: Drop the reference to DP++ dongle since it's not handled here
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-17-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull the "do we want to enable audio?" computation into a small helper
to make intel_hdmi_compute_config() less messy. Will make it easier to
add more checks for this later (eg. we should actually be checking
at the hblank is long enough for audio transmission).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-16-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The downstream facing port caps in the DPCD can give us a hint
as to what kind of display mode the sink can use if it doesn't
have an EDID. Use that information to pick a suitable mode.
v2: Use Returns: for kdoc (Lyude)
Add kdocs for drm_display_mode_from_cea_vic() (Lyude)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-14-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DP 1.3 adds some extra control knobs for DP->HDMI protocol conversion.
Let's use that to configure the "HDMI mode" (ie. infoframes vs. not)
based on the capabilities of the sink.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-13-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the new helpers to extract the TMDS clock limits from
the downstream facing port and check them in .mode_valid().
TODO: we should check these in .compute_config() too to eg.
determine if we can do deep color on the HDMI side or not
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-12-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the downstream facing port dotclock check into a new function
(intel_dp_mode_valid_downstream()) so that we have a nice future
place where we can collect other related checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-10-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to differentiate between the DFP dotclock and TMDS clock
limits. Let's convert the current thing to just give us the
dotclock limit.
v2: Use Returns: for kdoc (Lyude)
Fix up nouveau code too
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Deal with more cases in drm_dp_downstream_max_bpc():
- DPCD 1.0 -> assume 8bpc for non-DP
- DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything
- DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap
- anything else -> assume 8bpc
v2: Use Returns: for kdoc (Lyude)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Stash the downstream facing port max bpc away during
intel_dp_set_edid(). We'll soon need the EDID in there so
we can't figure this out so easily during .compute_config() anymore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-6-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Non-HDMI sinks shouldn't be sent infoframes. Check for that when
using LSPCON.
FIXME: How do we turn off infoframes once enabled? Do we even
have to?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-3-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we store a pointer to the fake iommu device that is allocated on
the stack, as soon as we leave the function it goes out of scope and any
future dereference is undefined behaviour. Just in case we may need to
look at the fake iommu device after initialiation, move the allocation
from the stack into the data.
Fixes: 01b9d4e21148 ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-2-chris@chris-wilson.co.uk
Just in case the caller passes in 0 for both slow&fast timeouts, make
sure we initialise the stack value returned. Add an assert so that we
don't make the mistake of passing 0 timeouts for the wait.
drivers/gpu/drm/i915/intel_uncore.c:2011 __intel_wait_for_register_fw() error: uninitialized symbol 'reg_value'.
References: 3f649ab728cd ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-1-chris@chris-wilson.co.uk
We currenty check for platform at multiple parts in the driver
to grab the correct PLL. Let us begin to centralize it through a
helper function.
v2: s/intel_get_pll_enable_reg()/intel_combo_pll_enable_reg() (Ville)
v3: Clean up combo_pll_disable() (Rodrigo)
v4: s/dev_priv/i915 (Jani)
Move static and return type to the same line( Ville, Jani)
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914175703.15024-1-anusha.srivatsa@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce intel_hpd_hotplug_irqs() as a partner to
intel_hpd_enabled_irqs(). There's no need to care about the
encoders which we're not exposing, so we can avoid hardcoding
the masks in various places.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Make a clean split between hpd pins for DDI vs. TC. This matches
how the actual hardware is split.
And with this we move the DDI/PHY->HPD pin mapping into the encoder
init instead of having to remap yet again in the interrupt code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently DP/HDMI/DDI encoders init their hpd_pin from the
connector init. Let's move it to the encoder init so that
we don't need to add platform specific junk to the connector
init (which is shared by all g4x+ platforms).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
gen11_hpd_detection_setup() is missing ports TC5/6. Add them.
TODO: Might be nice to only enable the hpd detection logic
for ports we actually have. Should be rolled out for all
platforms if/when done...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-8-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED
return false we have to be capable of shutting it down cleanly so
as to not anger the hw. To that end let's reduce the effect of
!INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected.
Should prevent anyone from automagically enabling any of them, while
still allowing us to cleanly shut them down.
v2: Put the check into the right place for CRT
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Having a mode where the display hardware is present but we try
to pretend it isn't just leads to massive headaches when trying
to reason what the fallout might be from skipping some random
bits of programming.
Let's just neuter INTEL_DISPLAY_ENABLED so that we treat the
hardware as fully present, except we just don't register any
outputs. That's still rather sketchy if the outputs are already
enabled when the driver is loaded. I think the simplest solution
would be to probe everything as normal and just return
disconnected" from all .detect() hooks. That would avoid anything
automagically enabling those outputs, but the driver could then
shut things down using the normal codepaths.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909213824.12390-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
g4x+ sprites have an extra cdclk limitation listed for RGB formats.
For some random reason I chose to use cpp>=4 as the check for that.
While that does actually work let's deobfuscate it by checking
for !is_yuv instead. I suspect is_yuv didn't exist way back when
I originally write the code.
Also drop the duplicate comment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206201204.31704-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Even if we're not doing downscaling we should account for
some of the extra dotclock limitations for g4x+ sprites. In
particular we must never exceed the 90% rule, and with RGB
that limits actually drops to 80%.
So instead of bailing out when upscaling let's clamp the
scaling factor appropriately and go through the rest of
calculation normally. By luck we already did the full
calculations for the 1:1 case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206201204.31704-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The CACHE_MODE_0 save/restore was added without explanation in
commit 1f84e550a870 ("drm/i915 more registers for S3 (DSPCLK_GATE_D,
CACHE_MODE_0, MI_ARB_STATE)"). If there are any bits we care about
those should be set explicitly during some appropriate init function.
Let's assume it's all good and just nuke this magic save/restore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Originally added in commit 1f84e550a870 ("drm/i915 more registers for
S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)") to fix some underruns.
I suspect that was due to the trickle feed settings getting clobbered
during suspend. We've been disabling trickle feed explicitly since
commit 20f949670f51 ("drm/i915: Disable trickle feed via MI_ARB_STATE
for the gen4") so this magic save/restore should no longer be needed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The FBC_CONTROL save restore is there just to preserve the
compression interval setting. Since commit a68ce21ba0c4
("drm/i915/fbc: Store the fbc1 compression interval in the params")
we've been explicitly setting the interval to a specific
value, so the sace/restore is now entirely pointless.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908140210.31048-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
