Commit Graph

1248704 Commits

Author SHA1 Message Date
Linus Torvalds
b4442cadca - Add support managing TDX host hardware
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmWfCRQACgkQaDWVMHDJ
 krDUqQ//VCvkpf0mAbYDJa1oTXFW8O5cVTusBtPi8k7cFbtjQpjno/9AqKol+sK8
 AKg+y5iHHl7QJmDmEcpS+O9OBbmFOpvDzm3QZhk8RkWS5pe0B108dnINYtS0eP9R
 MkzZwfrI2yC6NX4hvHGdD8WGHjrt+oxY0bojehX87JZsyRU+xqc/g1OO7a5bUPQe
 3Ip0kKiCeqFv0y+Q1pFMEd9RdZ8XxqzUHCJT3hfgZ6FajJ2eVy6jNrPOm6LozycB
 eOtYYNapSgw3k/WhJCOYWHX7kePXibLxBRONLpi6P3U6pMVk4n8wrgl7qPtdW1Qx
 nR2UHX5P6eFkxNCuU1BzvmPBROe37C51MFVw29eRnigvuX3j/vfCH1+17xQOVKVv
 5JyxYA0rJWqoOz6mX7YaNJHlmrxHzeKXudICyOFuu1j5c8CuGjh8NQsOSCq16XfZ
 hPzfYDUS8I7/kHYQPJlnB+kF9pmbyjTM70h74I8D6ZWvXESHJZt+TYPyWfkBXP/P
 L9Pwx1onAyoBApGxCWuvgGTLonzNredgYG4ABbqhUqxqncJS9M7Y/yJa+f+3SOkR
 T6LxoByuDVld5cIfbOzRwIaRezZDe/NL7rkHm/DWo98OaV3zILsr20Hx1lPZ1Vce
 ryZ9lCdZGGxm2jmpzr/VymPQz/E+ezahRHE1+F3su8jpCU41txg=
 =1EJI
 -----END PGP SIGNATURE-----

Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 TDX updates from Dave Hansen:
 "This contains the initial support for host-side TDX support so that
  KVM can run TDX-protected guests. This does not include the actual
  KVM-side support which will come from the KVM folks. The TDX host
  interactions with kexec also needs to be ironed out before this is
  ready for prime time, so this code is currently Kconfig'd off when
  kexec is on.

  The majority of the code here is the kernel telling the TDX module
  which memory to protect and handing some additional memory over to it
  to use to store TDX module metadata. That sounds pretty simple, but
  the TDX architecture is rather flexible and it takes quite a bit of
  back-and-forth to say, "just protect all memory, please."

  There is also some code tacked on near the end of the series to handle
  a hardware erratum. The erratum can make software bugs such as a
  kernel write to TDX-protected memory cause a machine check and
  masquerade as a real hardware failure. The erratum handling watches
  out for these and tries to provide nicer user errors"

* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/virt/tdx: Make TDX host depend on X86_MCE
  x86/virt/tdx: Disable TDX host support when kexec is enabled
  Documentation/x86: Add documentation for TDX host support
  x86/mce: Differentiate real hardware #MCs from TDX erratum ones
  x86/cpu: Detect TDX partial write machine check erratum
  x86/virt/tdx: Handle TDX interaction with sleep and hibernation
  x86/virt/tdx: Initialize all TDMRs
  x86/virt/tdx: Configure global KeyID on all packages
  x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
  x86/virt/tdx: Designate reserved areas for all TDMRs
  x86/virt/tdx: Allocate and set up PAMTs for TDMRs
  x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
  x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
  x86/virt/tdx: Get module global metadata for module initialization
  x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
  x86/virt/tdx: Add skeleton to enable TDX on demand
  x86/virt/tdx: Add SEAMCALL error printing for module initialization
  x86/virt/tdx: Handle SEAMCALL no entropy error in common code
  x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
  x86/virt/tdx: Define TDX supported page sizes as macros
  ...
2024-01-18 13:41:48 -08:00
Christophe JAILLET
05638ff6dd drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state()
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".

Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2024-01-18 16:37:54 -05:00
Ma Jun
bc03c02cc1 drm/amdgpu: Fix the null pointer when load rlc firmware
If the RLC firmware is invalid because of wrong header size,
the pointer to the rlc firmware is released in function
amdgpu_ucode_request. There will be a null pointer error
in subsequent use. So skip validation to fix it.

Fixes: 3da9b71563 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX10")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2024-01-18 16:34:45 -05:00
Wayne Lin
bfe79f5fff drm/amd/display: Align the returned error code with legacy DP
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.

[How]
Align the error code with the one reported by legacy DP as EIO.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:34:05 -05:00
Ovidiu Bunea
d3579f5df0 drm/amd/display: Fix DML2 watermark calculation
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib

[How]
update code to match HW DML2

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:31:52 -05:00
Ilya Bakoulin
3ba2a0bfd8 drm/amd/display: Clear OPTC mem select on disable
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.

[How]
Clear the memory select bits prior to disabling an OPTC.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:31:29 -05:00
Nicholas Kazlauskas
4b56f7d47b drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.

[How]
Port the DCN35 fixes to DCN314.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:30:58 -05:00
Charlene Liu
8a51cc097d drm/amd/display: Add logging resource checks
[Why]
When mapping resources, resources could be unavailable.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:30:40 -05:00
Dillon Varone
aa36d8971f drm/amd/display: Init link enc resources in dc_state only if res_pool presents
[Why & How]
res_pool is not initialized in all situations such as virtual
environments, and therefore link encoder resources should not be
initialized if res_pool is NULL.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:30:00 -05:00
Srinivasan Shanmugam
3bb9b1f958 drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)

Cc: stable@vger.kernel.org
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18 16:29:32 -05:00
Linus Torvalds
ba7dd8570d - Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmWfAycACgkQaDWVMHDJ
 krD5XQ/+KQ7kITy7jr5fskRQ3uGjk9KUnc3e3qO/SxDLJU9xuXbZbh5pqxZQrkud
 mj0G1LRCk8wsIPU44wP9SKPQRG9AqcsCNSiBkBaTBusHyCXCCvoJ013Mlqyj9ecz
 bvaYuHDuji29eV/0+xuOcv8ELJHFp/UCTQk6azeQIfUs/97/Ho2qMb1oHC7zNjWX
 okJBUj73tLO3EUCW5p9cLw2TgrmOtNa6KlNqj//xoDx03HofjoGyrx2fd8RcmOvY
 Z2v8XEfx/fnpD8vA8SwnCKhWDLHDdwdnLMREy3gykt3PBdmuIKTT5fIggMSMZh6c
 wbxYALGMyE+T0klIfme4k4SJuoitI+Ec/naW/aP3buAgdVFXVw7+KjAwEcOi18Sx
 kSpzvYCwE+sHIZdErk+1Wx/VIWgCBfkAr4hPLgxl5s6nHB2l7lXwGLvaxiBbXSQO
 aMDVD61JwCPI5WuLG8r8iCsCdbRwZVoe4Jm+CkwE69BccZfTXmjOuP0uNTY+cOoH
 Wroe74XGQp4QOvaBhunkzT/ntLaDcQvXGOhaTrYmCvElu1gB25c/FdEIPMTcQgPv
 dFMm49Gzo7v4RZjm/LSavJz6DU/40PRTYMntbKGSiirxAmxwpG8uNz9nUm6Q/4+D
 7uL0be3ey2DzGa+8FoYe9T3i0LbGiRBjlNIEXMjWh1pnD/auUGA=
 =PaVo
 -----END PGP SIGNATURE-----

Merge tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SGX updates from Dave Hansen:
 "This time, these are entirely confined to SGX selftests fixes.

  The mini SGX enclave built by the selftests has garnered some
  attention because it stands alone and does not need the sizable
  infrastructure of the official SGX SDK. I think that's why folks are
  suddently interested in cleaning it up.

   - Clean up selftest compilation issues, mostly from non-gcc compilers

   - Avoid building selftests when not on x86"

* tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/sgx: Skip non X86_64 platform
  selftests/sgx: Remove incomplete ABI sanitization code in test enclave
  selftests/sgx: Discard unsupported ELF sections
  selftests/sgx: Ensure expected location of test enclave buffer
  selftests/sgx: Ensure test enclave buffer is entirely preserved
  selftests/sgx: Fix linker script asserts
  selftests/sgx: Handle relocations in test enclave
  selftests/sgx: Produce static-pie executable for test enclave
  selftests/sgx: Remove redundant enclave base address save/restore
  selftests/sgx: Specify freestanding environment for enclave compilation
  selftests/sgx: Separate linker options
  selftests/sgx: Include memory clobber for inline asm in test enclave
  selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry
  selftests/sgx: Fix uninitialized pointer dereference in error path
2024-01-18 13:23:53 -08:00
Jakub Kicinski
925781a471 netfilter pull request 24-01-18
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmWpTnYACgkQ1V2XiooU
 IOQYpw//ZL9MkD3EIAB/D7dtqj7Oz9XssIqN/RDqq1NEFojH6u1OxRB2cYOxtvRD
 iAUf3LLPY/NucEFoEHmNWg3mmG9mwwkXMIikJrGa9QmEfr/a5XBQSfSUB3rf8F9F
 bLvQ056Zb0g+jJTi8iOYOouN1O4LIhfZveVJQf72tmw3Gqw87Sc1HGJL1x/QHhvb
 0vWzCb2AQOOyRVSLE3uYJYXI3AU/owM+axBUDk8RNmgkeJLDdwN8E56UQIW1X6Y9
 i0Xp5QZfH4KGj8Ffy/mcCmYYItGldVViZuvqB8qBKV6+PhMNbqHuQQsRLbL5M0GS
 oFeRmaUfuJfxLF9lm3SUDtELFXNlzeW4kK/wOGUMcXlg3fZHmJx+TfWg9N86ANqC
 ripNA8hrQO6wuBIk7DByykS8tkCWyS17s4r2hxU/3uTAHv9KxsLymE82YrDzGL1e
 Er9qd4waGnfZWCgLirJ/YMmPvVP33yJ3JSmjclp/3m54pijiejzsuUNDlUiMG1EE
 ekAawU91X/NuTGAtr+JGUG5TyHwWxodIKxPWGSf7Zes39jJzqDGydA56+A5w2Qdr
 aWSzDY1fMEfb9gegpd42lW+hhN+ZLzZuKuA8m3SxCXQx7/1dU+AzV21B93endzlL
 VxRO10W5LqxODsm0jl8rOdcOvBsC1gqLaf9kZQlGU6BG1AHYfEs=
 =DHHp
 -----END PGP SIGNATURE-----

Merge tag 'nf-24-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following batch contains Netfilter fixes for net. Slightly larger
than usual because this batch includes several patches to tighten the
nf_tables control plane to reject inconsistent configuration:

1) Restrict NFTA_SET_POLICY to NFT_SET_POL_PERFORMANCE and
   NFT_SET_POL_MEMORY.

2) Bail out if a nf_tables expression registers more than 16 netlink
   attributes which is what struct nft_expr_info allows.

3) Bail out if NFT_EXPR_STATEFUL provides no .clone interface, remove
   existing fallback to memcpy() when cloning which might accidentally
   duplicate memory reference to the same object.

4) Fix br_netfilter interaction with neighbour layer. This requires
   three preparation patches:

   - Use nf_bridge_get_physinif() in nfnetlink_log
   - Use nf_bridge_info_exists() to check in br_netfilter context
     is available in nf_queue.
   - Pass net to nf_bridge_get_physindev()

   And finally, the fix which replaces physindev with physinif
   in nf_bridge_info.

   Patches from Pavel Tikhomirov.

5) Catch-all deactivation happens in the transaction, hence this
   oneliner to check for the next generation. This bug uncovered after
   the removal of the _BUSY bit, which happened in set elements back in
   summer 2023.

6) Ensure set (total) key length size and concat field length description
   is consistent, otherwise bail out.

7) Skip set element with the _DEAD flag on from the netlink dump path.
   A tests occasionally shows that dump is mismatching because GC might
   lose race to get rid of this element while a netlink dump is in
   progress.

8) Reject NFT_SET_CONCAT for field_count < 1.

9) Use IP6_INC_STATS in ipvs to fix preemption BUG splat, patch
   from Fedor Pchelkin.

* tag 'nf-24-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  ipvs: avoid stat macros calls from preemptible context
  netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
  netfilter: nf_tables: skip dead set elements in netlink dump
  netfilter: nf_tables: do not allow mismatch field size and set key length
  netfilter: nf_tables: check if catch-all set element is active in next generation
  netfilter: bridge: replace physindev with physinif in nf_bridge_info
  netfilter: propagate net to nf_bridge_get_physindev
  netfilter: nf_queue: remove excess nf_bridge variable
  netfilter: nfnetlink_log: use proper helper for fetching physinif
  netfilter: nft_limit: do not ignore unsupported flags
  netfilter: nf_tables: bail out if stateful expression provides no .clone
  netfilter: nf_tables: validate .maxattr at expression registration
  netfilter: nf_tables: reject invalid set policy
====================

Link: https://lore.kernel.org/r/20240118161726.14838-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18 12:45:05 -08:00
Kees Cook
e28b035958 bcachefs: Replace strlcpy() with strscpy()
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().

Nothing checks the return value here, so a direct replacement with
strspy() is possible.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Brian Foster <bfoster@redhat.com>
Cc:  <linux-bcachefs@vger.kernel.org>
Link: https://lore.kernel.org/r/20240110235438.work.385-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-01-18 12:29:21 -08:00
Wolfram Sang
4503538d30 MAINTAINERS: use proper email for my I2C work
Renesas is solely funding my I2C maintenance meanwhile, give them credit
for that by using this email address.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-01-18 21:10:44 +01:00
Alain Volmat
90f9b14062 i2c: stm32f7: add support for stm32mp25 soc
The stm32mp25 has only a single interrupt line used for both
events and errors. In order to cope with that, reorganise the
error handling code so that it can be called either from the
common handler (used in case of SoC having only a single IT line)
and the error handler for others.
The CR1 register also embeds a new FMP bit, necessary when running
at Fast Mode Plus frequency. This bit should be used instead of
the SYSCFG bit used on other platforms.
Add a new compatible to distinguish between the SoCs and two
boolean within the setup structure in order to know if the
platform has a single/multiple IT lines and if the FMP bit
within CR1 is available or not.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Alain Volmat
a058b24c08 i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
Move readl_relaxed of I2C_ISR register at beginning of event isr
so that it done once for both master & slave handling.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Alain Volmat
bf12998e1a dt-bindings: i2c: document st,stm32mp25-i2c compatible
Add a new compatible st,stm32mp25-i2c for the STM32MP25 series which
has only one interrupt line for both events and errors and differs in
term of handling of FastModePlus.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Alain Volmat
33a00d9192 i2c: stm32f7: simplify status messages in case of errors
Avoid usage of __func__ when reporting an error message
since dev_err/dev_dbg are already providing enough details
to identify the source of the message.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Alain Volmat
e6103cd45e i2c: stm32f7: perform most of irq job in threaded handler
The irq handling is currently split between the irq handler
and the threaded irq handler.  Some of the handling (such as
dma related stuffs) done within the irq handler might sleep or
take some time leading to issues if the kernel is built with
realtime constraints.  In order to fix that, perform an overall
rework to perform most of the job within the threaded handler
and only keep fifo access in the non threaded handler.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Alain Volmat
a51e224c2f i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
Convert error handling upon calls of devm_request_irq functions during
the probe of the driver.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:44 +01:00
Paul Menzel
2f189493ae i2c: i801: Add lis3lv02d for Dell XPS 15 7590
On the Dell XPS 15 7590/0VYV0G, BIOS 1.24.0 09/11/2023, Linux prints the
warning below.

    i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration

Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 2 at
address 0x29.

    $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
    lis3lv02d 0x29
    $ dmesg | tail -5
    [  549.522876] lis3lv02d_i2c 2-0029: supply Vdd not found, using dummy regulator
    [  549.522904] lis3lv02d_i2c 2-0029: supply Vdd_IO not found, using dummy regulator
    [  549.542486] lis3lv02d: 8 bits 3DC sensor found
    [  549.630022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input35
    [  549.630586] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29

So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.

[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/

Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Paul Menzel
6d9450464c i2c: i801: Add lis3lv02d for Dell Precision 3540
On the Dell Precision 3540/0M14W7, BIOS 1.7.4 05/12/2020, Linux prints
the warning below.

    i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration

With the help of Wolfram Sang, the test to probe it on I2C bus 6 at address
0x29 was successful.

    $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-6/new_device
    [ 2110.787000] i2c i2c-6: new_device: Instantiated device lis3lv02d at 0x29
    [ 2110.791932] lis3lv02d_i2c 6-0029: supply Vdd not found, using dummy regulator
    [ 2110.791981] lis3lv02d_i2c 6-0029: supply Vdd_IO not found, using dummy regulator
    [ 2110.809233] lis3lv02d: 8 bits 3DC sensor found
    [ 2110.900668] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23

So, the device has that accelerometer. Add the I2C address to the
mapping list.

Link: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Hans Hu
bb7c0209c4 i2c: wmt: Reduce redundant: REG_CR setting
These Settings for the same register, REG_CR,
can be put together to reduce code redundancy.

Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Hans Hu
4c541c6a66 i2c: wmt: Reduce redundant: function parameter
Use more appropriate parameter passing to reduce the amount of code

Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Hans Hu
7108ecf3cb i2c: wmt: Reduce redundant: clock mode setting
The frequency setting mode is adjusted to reduce the code redundancy,
and it is also convenient to share with zhaoxin

Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Hans Hu
8a22991a48 i2c: wmt: Reduce redundant: wait event complete
Put the handling of interrupt events in a function class
to reduce code redundancy.

Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Hans Hu
462e9804d2 i2c: wmt: Reduce redundant: bus busy check
Put wmt_i2c_wait_bus_not_busy() in a more appropriate place
to reduce code redundancy

Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Heiner Kallweit
a8355235db i2c: mux: reg: Remove class-based device auto-detection support
Legacy class-based device auto-detection shouldn't be used in new code.
Therefore remove support in i2c-mux-reg as long as we don't have a
user of this feature yet.

Link: https://lore.kernel.org/linux-i2c/a22978a4-88e4-46f4-b71c-032b22321599@gmail.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Greg Kroah-Hartman
94959c0e79 i2c: make i2c_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the i2c_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.

Note, the sound/soc/rockchip/rk3399_gru_sound.c also needed tweaking as
it decided to save off a pointer to a bus type for internal stuff, and
it was using the i2c_bus_type as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:43 +01:00
Philipp Zabel
614ef4d30f dt-bindings: at24: add ROHM BR24G04
Add compatible for ROHM Semiconductor BR24G04 EEPROMs.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-18 21:10:43 +01:00
Bartosz Golaszewski
2b0eee4f6a eeprom: at24: use of_match_ptr()
This driver does not depend on CONFIG_OF so using of_match_ptr() makes
sense to reduce the size a bit.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-01-18 21:10:43 +01:00
Christophe Leroy
e535af5c42 i2c: cpm: Remove linux,i2c-index conversion from be32
sparse reports an error on some data that gets converted from be32.

That's because that data is typed u32 instead of __be32.

The type is correct, the be32_to_cpu() conversion is not.

Remove the conversion.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312042210.QL4DA8Av-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-By: Jochen Friedrich <jochen@scram.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Alexander Stein
db63eacdf6 i2c: imx: Make SDA actually optional for bus recovering
Both i2c_generic_scl_recovery() and the debug output indicate that SDA is
purely optional for bus recovery. But devm_gpiod_get() never returns NULL
making it mandatory. Fix this by calling devm_gpiod_get_optional instead.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Jean Delvare
13e3a512a2 i2c: smbus: Support up to 8 SPD EEPROMs
I originally restricted i2c_register_spd() to only support systems
with up to 4 memory slots, so that we can experiment with it on
a limited numbers of systems. It's been more than 3 years and it
seems to work just fine, so the time has come to lift this arbitrary
limitation.

The maximum number of memory slots which can be connected to a single
I2C segment is 8, so support that many SPD EEPROMs. Any system with
more than 8 memory slots would have either multiple SMBus channels
or SMBus multiplexing, so it would need dedicated care. We'll get to
that later as needed.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Tim Lunn
92a85b7c62 i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126
Rockchip RV1126 is using old style i2c controller, the i2c2
bus uses a non-sequential offset in the grf register for the
mask/value bits for this bus.

This patch fixes i2c2 bus on rv1126 SoCs.

Signed-off-by: Tim Lunn <tim@feathertop.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Marek Szyprowski
187432b821 i2c: s3c24xx: add support for atomic transfers
Add support for atomic transfers using polling mode with interrupts
intentionally disabled to get rid of the following warning introduced by
commit 63b96983a5 ("i2c: core: introduce callbacks for atomic
transfers") during system reboot and power-off:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1518 at drivers/i2c/i2c-core.h:40 i2c_transfer+0xe8/0xf4
No atomic I2C transfer handler for 'i2c-0'
...
---[ end trace 0000000000000000 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Marek Szyprowski
990489e104 i2c: s3c24xx: fix transferring more than one message in polling mode
To properly handle ACK on the bus when transferring more than one
message in polling mode, move the polling handling loop from
s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way
i2c_s3c_irq_nextbyte() is always executed till the end, properly
acknowledging the IRQ bits and no recursive calls to
i2c_s3c_irq_nextbyte() are made.

While touching this, also fix finishing transfers in polling mode by
using common code path and always waiting for the bus to become idle
and disabled.

Fixes: 117053f77a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Marek Szyprowski
0d9cf23ed5 i2c: s3c24xx: fix read transfers in polling mode
To properly handle read transfers in polling mode, no waiting for the ACK
state is needed as it will never come. Just wait a bit to ensure start
state is on the bus and continue processing next bytes.

Fixes: 117053f77a ("i2c: s3c2410: Add polling mode support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Wolfram Sang
d0520eb3ed i2c: rcar: add FastMode+ support for Gen4
To support FM+, we mainly need to turn the SMD constant into a parameter
and set it accordingly. That also means we can finally fix SMD to our
needs instead of bailing out. A sanity check for SMD then becomes a
sanity check for 'x == 0'. After all that, activating the enable bit for
FM+ is all we need to do. Tested with a Renesas Falcon board using R-Car
V3U.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Wolfram Sang
2b523c46e8 i2c: rcar: introduce Gen4 devices
So far, we treated Gen4 as Gen3. But we are soon adding FM+ as a Gen4
specific feature, so prepare the code for the new devtype.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Wolfram Sang
e19e1abc9c i2c: npcm7xx: move to per-adapter debugfs directory
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:42 +01:00
Wolfram Sang
c66520c02c i2c: gpio: move to per-adapter debugfs directory
The I2C core now provides a per-adapter debugfs directory. Use it
instead of creating a custom one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Wolfram Sang
73febd775b i2c: create debugfs entry per adapter
Two drivers already implement custom debugfs handling for their
i2c_adapter and more will come. So, let the core create a debugfs
directory per adapter and pass that to drivers for their debugfs files.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
f79ad78a25 staging: greybus: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
8cd210d200 media: netup_unidvb: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
c1cc7ccb0f i2c: stub: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
9fd12f3857 i2c: Don't let i2c adapters declare I2C_CLASS_SPD support if they support I2C_CLASS_HWMON
After removal of the legacy eeprom driver the only remaining I2C
client device driver supporting I2C_CLASS_SPD is jc42. Because this
driver also supports I2C_CLASS_HWMON, adapters don't have to
declare support for I2C_CLASS_SPD if they support I2C_CLASS_HWMON.
It's one step towards getting rid of I2C_CLASS_SPD mid-term.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com> # for SCX
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
f21682b362 drm/amd/pm: Remove I2C_CLASS_SPD support
I2C_CLASS_SPD was used to expose the EEPROM content to user space,
via the legacy eeprom driver. Now that this driver has been removed,
we can remove I2C_CLASS_SPD support. at24 driver with explicit
instantiation should be used instead.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
b60db383e2 include/linux/i2c.h: remove I2C_CLASS_DDC support
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00
Heiner Kallweit
754bd2fffc fbdev: remove I2C_CLASS_DDC support
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.

Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2024-01-18 21:10:41 +01:00