IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-5-tzimmermann@suse.de
Add DT support, by:
1. Creating a panel bridge from DT, and attaching it to the encoder,
2. Replacing the custom connector with a bridge connector,
3. Obtaining clock configuration based on the compatible value.
Note that for now the driver uses a fixed clock configuration selecting
the bus clock, as the current code to select other clock inputs needs
changes to support any other SoCs than SH7724.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6185ab76aa300fa402e4f6610b2109665f2d8a1c.1694767209.git.geert+renesas@glider.be
Now the suspend/resume methods no longer need to look at internal driver
state, the dpms and started fields in the shmob_drm_crtc structure can
be removed, as well as the shmob_drm_crtc_dpms() wrapper. After this,
shmob_drm_crtc_atomic_{en,dis}able() became just wrappers around
shmob_drm_crtc_st{art,op}(), so inline the latter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/905b9ca72f43d40438c8cb1199cde140eb123204.1694767209.git.geert+renesas@glider.be
Implement atomic mode setting for both the primary and overlay planes.
This involves:
- Moving the primary plane handling code from CRTC mode setting to
plane handling shared by primary and overlay planes,
- Adding basic CRTC and mode config atomic mode setting ops, which
don't do much yet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a6b698a1c8c1eaf631c2f928f5888ab5fe7aa4c3.1694767209.git.geert+renesas@glider.be
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_{on,off}() helpers.
Note that drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. This is performed at CRTC creation time, requiring vertical
blank initialization to be moved before creating CRTCs.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5833e5706b7792bfca8e6e56fc154a7c3e0574f.1694767209.git.geert+renesas@glider.be
Turning a CRTC off will prevent a queued page flip from ever completing,
potentially confusing userspace. Wait for queued page flips to complete
before turning the CRTC off to avoid this.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c97d5859c43fa36043c61de28d67688ebe345092.1694767209.git.geert+renesas@glider.be
Move legacy interface handling to the connector setup code.
Set up bus_flags and bus_formats in display_info according to the
bus format and panel information from platform data, to make it more
similar with DT-based connector/bridge/panel setup.
This will allow us to use the same LCD interface setup code for both
legacy and DT-based systems.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/912f615eb87c847804a268200ab57c63453c65d4.1694767209.git.geert+renesas@glider.be
Replace the drm_mode_modeinfo field with videomode that includes more
signal polarity flags. This simplifies driver handling of panel modes
and prepares for DT support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Simplify]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4312e56de424d94399c6105e7159317eae86c9d5.1694767209.git.geert+renesas@glider.be
Now that drm_device is embedded in shmob_drm_device, we can use
a container_of()-based helper to get the shmob_drm_device pointer from
the drm_device, instead of using the deprecated drm_device.dev_private
field.
While at it, restore reverse Xmas tree ordering of local variable
declarations.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8ef4be8bffe75efc7f4b66f3732ec357f7d43e0f.1694767209.git.geert+renesas@glider.be
There is no need to call drm_plane_force_disable() from the plane's
.destroy() callback, as the plane should have been disabled already
before. See also commit 3c858a33858baa8c ("drm/plane_helper: don't
disable plane in destroy function") for the generic plane helper case.
After removing this call, shmob_drm_plane_destroy() becomes a simple
wrapper around shmob_drm_plane_destroy(), hence replace it by the
latter.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8d7a3f250612085fdf4e06d377843e8f874b22d9.1694767209.git.geert+renesas@glider.be
Prepare for DT conversion, where panel probe can be deferred, by
streamlining error propagation and handling:
- Use dev_err_probe() to avoid printing error messages in case of
probe deferral,
- Propagate errors where needed.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6dfac76e5b1c7dda3f96801ce83845a4235e2ccd.1694767209.git.geert+renesas@glider.be
Prepare for DT bindings by using more appropriate names for the input
clocks.
Note that all LDDCKR_ICKSEL_* definitions but the one for the bus clock
are valid only for SH7724, so the clock selection code needs to be
updated when extending clock support to other SoCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Add note]
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d4b4d2164541ae055d10064103db3c2d6540e846.1694767209.git.geert+renesas@glider.be
The display info width_mm and height_mm fields are set at init time and
never overwritten, don't set them a second time when getting modes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/edd49fcb92af83d81df655b3db1685e8ed14380a.1694767209.git.geert+renesas@glider.be
Backlight support should be implemented by panels, not by the LCDC
driver. As the feature is currently unused anyway, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Cleanups]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/69707650245bc2193d072f24723d4d5482ea590b.1694767209.git.geert+renesas@glider.be
Improve the table containing hardware information related to the
supported plane formats:
1. Move (part of) the overlay format register settings from multiple
switch() statements spread across the code into the table, like is
already done for the primary plane register settings,
2. Remove the .yuv field, as that information can easily be extracted
from the register settings using a new helper macro,
3. Shrink and move the .bpp field to reduce table size.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b41f755e80ffe5fb4adbb2d8f96f2073de5c33bc.1694767209.git.geert+renesas@glider.be
The primary plane supports various YCbCr formats, and the CRTC code
already knows how to handle them. Enable support for the missing
formats by adding them to the table of supported modes.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e5a5d5ab2083280be5fcdc428e8b8ca198b4448d.1694767209.git.geert+renesas@glider.be
The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs
(clock domain on all, power domain on some). Hence it may not be
sufficient to manage the LCDC module clock explicitly (e.g. if the
selected clock source differs from SHMOB_DRM_CLK_BUS).
Fix this by using Runtime PM for all clock handling. Add an explicit
dependency on CONFIG_PM, which should already be met on all affected
platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e7359a64963bd9a4f1531c2beae850774ce140bc.1694767209.git.geert+renesas@glider.be
The first encoder output on the SH-Mobile LCD Controller is a DPI
parallel bus. However, at the time of introduction of the driver, no
encoder or connector types were defined yet for the DPI parallel bus,
hence the driver used the ones for LVDS instead.
Adjust the types accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/db500dd8356955d3471a1ccd68d90db9f9750ef9.1694767209.git.geert+renesas@glider.be
When configuring a CHn Source Image Format Register (LDBBSIFR), one
should use the corresponding LDBBSIFR_RPKF_* definition for overlay
planes, not the DDFR_PKF_* definition for the primary plane.
Fortunately both definitions resolve to the same value, so this bug did
not cause any harm.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/34f8d51539c048e264699ca869ad9d7a952cd69f.1694767209.git.geert+renesas@glider.be
Merely writing zero to the CHn Source Image Format Register is not
sufficient to disable a plane, as the programmed register value is not
propagated immediately to the current side. This can be seen when using
the -P option of modetest: the extra plane is displayed correctly, but
does not disappear after exit.
Fix this by doing the full update dance using the Blend Control
Register, like is done when enabling the plane.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/54e2556e18b5524ce153a7ac79faf2c7b0a55260.1694767209.git.geert+renesas@glider.be
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-40-u.kleine-koenig@pengutronix.de
These formats are used by Android so having them available
allows the DU to be used for composition operations.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add additional pixel formats for which blending is disabled when
DRM_MODE_BLEND_PIXEL_NONE is set.
Refactor the fourcc selection into a separate function to handle the
increased number of formats.
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The (large) rcar_du_modeset_init() function can fail for many reasons,
two of two involving probe deferral. Use dev_err_probe() in those code
paths to record the cause of the probe deferral, in order to help
debugging probe issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
drm_info() adds proper context to the kernel log message, as it receives
the drm_device pointer. It is thus preferred over DRM_INFO(). Replace
the latter with the former.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state()
into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer
exists, but is part of drm_atomic_helper_check_plane_state().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8bb42a92fc20e3d11e5847e7f15a47c687b73104.1689779916.git.geert+renesas@glider.be
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de
Backmerging into drm-misc-next to get commit 2c1c7ba457d4
("drm/amdgpu: support partition drm devices"), which is required to fix
commit 0adec22702d4 ("drm: Remove struct drm_driver.gem_prime_mmap").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
