IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Revert the patch series "Call blk_mq_free_tag_set() earlier" because it
introduces a deadlock if the scsi_remove_host() caller holds a reference on
a device, target or host.
Link: https://lore.kernel.org/r/20220821220502.13685-4-bvanassche@acm.org
Fixes: 16728aaba6 ("scsi: core: Make sure that hosts outlive targets")
Reported-by: syzbot+bafeb834708b1bb750bc@syzkaller.appspotmail.com
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert the patch series "Call blk_mq_free_tag_set() earlier" because it
introduces a deadlock if the scsi_remove_host() caller holds a reference on
a device, target or host.
Link: https://lore.kernel.org/r/20220821220502.13685-3-bvanassche@acm.org
Fixes: 1a9283782d ("scsi: core: Simplify LLD module reference counting")
Reported-by: syzbot+bafeb834708b1bb750bc@syzkaller.appspotmail.com
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Revert the patch series "Call blk_mq_free_tag_set() earlier" because it
introduces a deadlock if the scsi_remove_host() caller holds a reference on
a device, target or host.
Link: https://lore.kernel.org/r/20220821220502.13685-2-bvanassche@acm.org
Fixes: f323896fe6 ("scsi: core: Call blk_mq_free_tag_set() earlier")
Reported-by: syzbot+bafeb834708b1bb750bc@syzkaller.appspotmail.com
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the missing destroy_workqueue() before return from
lpfc_sli4_driver_resource_setup() in the error path.
Link: https://lore.kernel.org/r/20220823044237.285643-1-yangyingliang@huawei.com
Fixes: 3cee98db26 ("scsi: lpfc: Fix crash on driver unload in wq free")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
{clear|set}_bit() can take an almost arbitrarily large bit number, so there
is no need to manually compute addresses. This is just redundant.
Link: https://lore.kernel.org/r/c3429a22023f58e5e5cc65d6cd7e83fb2bd9b870.1658340442.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less
verbose and it improves the semantic.
Link: https://lore.kernel.org/r/5f975ef43f8b7306e4ac4e2e8ce4bcd53f6092bb.1658340441.git.christophe.jaillet@wanadoo.fr
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the value from lpfc_issue_reg_vfi() directly instead of storing it
in another redundant variable.
Link: https://lore.kernel.org/r/20220824075123.221316-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return the value from lpfc_sli4_issue_wqe() directly instead of storing it
in another redundant variable.
Link: https://lore.kernel.org/r/20220824075017.221244-1-ye.xingchen@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/qla2xxx/qla_os.c:40:20: warning: symbol 'qla_trc_array'
was not declared. Should it be static?
drivers/scsi/qla2xxx/qla_os.c:345:5: warning: symbol
'ql2xdelay_before_pci_error_handling' was not declared.
Should it be static?
Define qla_trc_array and ql2xdelay_before_pci_error_handling as static to
fix sparse warnings.
Link: https://lore.kernel.org/r/20220826102559.17474-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Older tracing of driver messages was to:
- log only debug messages to kernel main trace buffer; and
- log only if extended logging bits corresponding to this message is
off
This has been modified and extended as follows:
- Tracing is now controlled via ql2xextended_error_logging_ktrace
module parameter. Bit usages same as ql2xextended_error_logging.
- Tracing uses "qla2xxx" trace instance, unless instance creation have
issues.
- Tracing is enabled (compile time tunable).
- All driver messages, include debug and log messages are now traced in
kernel trace buffer.
Trace messages can be viewed by looking at the qla2xxx instance at:
/sys/kernel/tracing/instances/qla2xxx/trace
Trace tunable that takes the same bit mask as ql2xextended_error_logging
is:
ql2xextended_error_logging_ktrace (default=1)
Link: https://lore.kernel.org/r/20220826102559.17474-6-njavali@marvell.com
Suggested-by: Daniel Wagner <dwagner@suse.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new API to obtain the NVMe Parameters region status from the Auxiliary
Image Status bitmap.
Link: https://lore.kernel.org/r/20220826102559.17474-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.
Link: https://lore.kernel.org/r/20220826102559.17474-3-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This message is helpful to troubleshoot missing LUNs/SAN boot errors. It'd
be nice to log it by default instead of only being enabled with debug.
This user had an accidental/forgotten file modprobe.d/qla2xxx.conf w/
option qlini_mode=disabled from experiments with FC target mode, and their
boot LUN didn't come up, as it skips SCSI scan, of course.
However, their boot log didn't provide any clues to help understand that.
The issue/message could be figured out w/ ql2xextended_error_logging, but
it would have been simpler (or even deflected/addressed by user) if it had
been there by default. And it also would help support/triage/deflection
tooling.
Expected change:
scsi host15: qla2xxx
+qla2xxx [0000:3b:00.0]-00fb:15: skipping scsi_scan_host() for non-initiator port
qla2xxx [0000:3b:00.0]-00fb:15: QLogic QLE2692 - QLE2692 Dual Port 16Gb FC to PCIe Gen3 x8 Adapter.
According to:
qla2x00_probe_one()
...
ret = scsi_add_host(...);
...
ql_log(ql_log_info, ...
"skipping scsi_scan_host() for non-initiator port\n");
...
ql_log(ql_log_info, ...
"QLogic %s - %s.\n", ha->model_number, ha->model_desc);
Link: https://lore.kernel.org/r/20220825120159.275051-1-mfo@canonical.com
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the driver hits an internal error condition returning DID_REQUEUE the
I/O will be retried on the same ITL nexus. This will inhibit multipathing,
resulting in endless retries even if the error could have been resolved by
using a different ITL nexus. Return DID_TRANSPORT_DISRUPTED to allow for
multipath to engage and route I/O to another ITL nexus.
Link: https://lore.kernel.org/r/20220824060033.138661-1-hare@suse.de
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With cmd_per_lun value 7, a higher number of cache lines (map_nr) are
needed while allocating sdev->budget_map which is not reasonable and hence
increase the cmd_per_lun value to 128.
Link: https://lore.kernel.org/r/20220825075457.16422-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ExtendedType field was set to 1 in the diag buffer register command and
hence MPT Endpoint firmware is failing the request with Invalid Field
IOCStatus.
memset the request frame to zero before framing the diag buffer register
command.
Link: https://lore.kernel.org/r/20220825075457.16422-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a pool crosses the 4GB boundary region then before reallocating pools
change the coherent DMA mask to 32 bits and keep the normal DMA mask set to
63/64 bits.
Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If SCSI error handling is taking place for timed out I/Os on a drive and
the corresponding drive is removed, then stop escalating to higher level of
reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key.
Link: https://lore.kernel.org/r/20220816080801.13929-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the code accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/1448f387821833726b99f0ce13069ada89164eb5.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhanced-by: Kees Cook <keescook@chromium.org> # Change in struct MR_DRV_RAID_MAP_ALL
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element array with flexible-array
member in struct MR_DRV_RAID_MAP and refactor the the rest of the code
accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/r/4495ce170c8ef088a10f1abe0e7c227368f43242.1660592640.git.gustavoars@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhanced-by: Kees Cook <keescook@chromium.org> # Change in struct MR_FW_RAID_MAP_ALL
Although qla2xxx driver is calling schedule_{,delayed}_work() from 10
locations, I assume that flush_scheduled_work() from qlt_stop_phase1()
needs to flush only works scheduled by qlt_sched_sess_work(), for this loop
continues while "struct qla_tgt"->sess_works_list is not empty.
Link: https://lore.kernel.org/r/133c6723-90b6-5c8b-72b4-cc01eeb3a8c0@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently qlt_stop_phase1() may fail to call flush_scheduled_work(), for
list_empty() may return true as soon as qlt_sess_work_fn() called
list_del(). In order to close this race window, check list_empty() after
calling flush_scheduled_work().
If this patch causes problems, please check commit c4f135d643
("workqueue: Wrap flush_workqueue() using a macro"). We are on the way to
remove all flush_scheduled_work() calls from the kernel.
Link: https://lore.kernel.org/r/7f24469d-9e39-3398-d851-329b54c0b923@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
"struct qla_tgt"->del_sess_list is no longer used since commit
726b854870 ("qla2xxx: Add framework for async fabric discovery").
Link: https://lore.kernel.org/r/0c335e86-5624-b599-5137-f1377419fb0c@I-love.SAKURA.ne.jp
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2022 for files modified in the 14.2.0.6 patch set.
Link: https://lore.kernel.org/r/20220819011736.14141-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.2.0.6.
Link: https://lore.kernel.org/r/20220819011736.14141-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SANDiags feature is unused, and related code is removed.
Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add capability to specify warning notification period to help firmware
adjust to congestion accordingly.
Link: https://lore.kernel.org/r/20220819011736.14141-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kernel test robot reported the following sparse warning:
arch/arm64/include/asm/cmpxchg.h:88:1: sparse: sparse: cast truncates
bits from constant value (369 becomes 69)
On arm64, atomic_xchg only works on 8-bit byte fields. Thus, the macro
usage of LPFC_RXMONITOR_TABLE_IN_USE can be unintentionally truncated
leading to all logic involving the LPFC_RXMONITOR_TABLE_IN_USE macro to not
work properly.
Replace the Rx Table atomic_t indexing logic with a new
lpfc_rx_info_monitor structure that holds a circular ring buffer. For
locking semantics, a spinlock_t is used.
Link: https://lore.kernel.org/r/20220819011736.14141-4-jsmart2021@gmail.com
Fixes: 17b27ac592 ("scsi: lpfc: Add rx monitoring statistics")
Cc: <stable@vger.kernel.org> # v5.15+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to
lpfc_nlp_put() with a null pointer to a nodelist structure.
Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon
entry.
Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During a stress offline/online test in PT2PT topology, target rediscovery
can fail with a specific target vendor array.
When the HBA transitions to online mode it is possible to receive an
unsolicited FLOGI before processing the Link Up event. The received FLOGI
will set the defer_flogi_acc_flag, which instructs the driver to wait until
it transmits its own FLOGI before ACKing the received FLOGI. In this
failure scenario, the link up processing clears the set
defer_flogi_acc_flag before we have sent out the FLOGI. As the target has
the higher WWPN and is responsible for sending the PLOGI, the target is
stuck waiting for its FLOGI_ACC that the driver will never send.
Remove the clear of defer_flogi_acc_flag from Link Up event processing. In
this stress test case, the defer_flogi_acc_flag is cleared during the Link
Down event processing anyways.
Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable stp is assigned a value that is never read, the assignment and the
variable stp are redundant and can be removed.
Cleans up clang scan build warning:
drivers/scsi/st.c:4253:7: warning: Although the value stored to 'stp'
is used in the enclosing expression, the value is never actually
read from 'stp' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220805115652.2340991-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable mfiStatus is assigned a value but it is never read. The
assignment is redundant and can be removed. Also remove { } as the return
statement does not need to be in its own code block.
Cleans up clang scan build warning:
drivers/scsi/megaraid/megaraid_sas_base.c:4026:7: warning: Although the
value stored to 'mfiStatus' is used in the enclosing expression, the
value is never actually read from 'mfiStatus' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220805115042.2340400-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable scb is assigned a value but it is never read. The assignment
is redundant and can be removed. Also replace the != NULL check with the
more usual non-null check idiom.
Cleans up clang scan build warning:
drivers/scsi/initio.c:1169:9: warning: Although the value stored to 'scb'
is used in the enclosing expression, the value is never actually read
from 'scb' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220805114100.2339637-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable firmware download for ATTO devices where it is not supported.
Link: https://lore.kernel.org/r/20220805174609.14830-2-bgrove@attotech.com
Co-developed-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM
structure used by ATTO's devices.
Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.com
Co-developed-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Rob Crispo <rcrispo@attotech.com>
Signed-off-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Block the I/Os on the target devices until corresponding target device's
target dev objects are refreshed as part of post controller reset
operation.
Link: https://lore.kernel.org/r/20220804131226.16653-16-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the host's SAS ports if there is change in port id or phys. If the
port id is changed, then the driver updates it. If some phys are
enabled/disabled during reset, then driver updates them in STL.
Check for the responding expander devices and update the device handle if
it got changed. Register the expander with STL if it got added during reset
and unregister the expander device if it got removed during reset.
[mkp: include fix for zeroday warning]
Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the following SAS transport class callbacks:
- get_linkerrors
- get_enclosure_identifier
- get_bay_identifier
- phy_reset
- phy_enable
- set_phy_speed
- smp_handler
Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add framework to issue MPT transport commands to controllers. Also issue
the MPT transport commands to get the manufacturing info of SAS expander
device.
Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL)
whenever the corresponding device is added/removed from topology.
Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When device is registered with the STL then get the corresponding device's
target object using the rphy in below callback functions:
- mpi3mr_target_alloc()
- mpi3mr_slave_alloc()
- mpi3mr_slave_configure()
- mpi3mr_slave_destroy()
Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register/unregister the expander devices to SCSI Transport Layer(STL)
whenever the corresponding expander is added/removed from topology.
Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if
multipath capability is disabled in the controller's firmware.
Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the following helper functions:
- Update the host phys with STL
- Remove the device's SAS port with STL
Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the following helper functions:
- Get the device's sas address by reading corresponding device's Device
page0
- Get the expander object from expander list based on expander's handle
- Get the target device object from target device list based on device's
sas address
- Get the expander device object from expander list based on expanders's
sas address
- Get hba port object from hba port table list based on port's port id
Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add framework to register and unregister the host and expander phys with
SCSI Transport Layer (STL).
Link: https://lore.kernel.org/r/20220804131226.16653-6-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable and process the Enclosure device add event.
Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helper functions to retrieve below controller's config pages:
- SAS IOUnit Page0
- SAS IOUnit Page1
- Driver Page1
- Device Page0
- SAS Phy Page0
- SAS Phy Page1
- SAS Expander Page0
- SAS Expander Page1
- Enclosure Page0
Also add the helper function to set SAS IOUnit Page1.
Link: https://lore.kernel.org/r/20220804131226.16653-4-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add config and transport request related error & info debug flags and
functions.
Link: https://lore.kernel.org/r/20220804131226.16653-2-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although commit 88f1669019 ("scsi: sd: Rework asynchronous resume support")
eliminates a delay for some ATA disks after resume, it causes resume of ATA
disks to fail on other setups. See also:
* "Resume process hangs for 5-6 seconds starting sometime in 5.16"
(https://bugzilla.kernel.org/show_bug.cgi?id=215880).
* Geert's regression report
(https://lore.kernel.org/linux-scsi/alpine.DEB.2.22.394.2207191125130.1006766@ramsan.of.borg/).
This is what I understand about this issue:
* During resume, ata_port_pm_resume() starts the SCSI error handler. This
changes the SCSI host state into SHOST_RECOVERY and causes
scsi_queue_rq() to return BLK_STS_RESOURCE.
* sd_resume() calls sd_start_stop_device() for ATA devices. That function
in turn calls sd_submit_start() which tries to submit a START STOP UNIT
command. That command can only be submitted after the SCSI error handler
has changed the SCSI host state back to SHOST_RUNNING.
* The SCSI error handler runs on its own thread and calls
schedule_work(&(ap->scsi_rescan_task)). That causes
ata_scsi_dev_rescan() to be called from the context of a kernel
workqueue. That call hangs in blk_mq_get_tag(). I'm not sure why - maybe
because all available tags have been allocated by sd_submit_start()
calls (this is a guess).
Link: https://lore.kernel.org/r/20220816172638.538734-1-bvanassche@acm.org
Fixes: 88f1669019 ("scsi: sd: Rework asynchronous resume support")
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: gzhqyz@gmail.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: gzhqyz@gmail.com
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: John Garry <john.garry@huawei.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passthrough users will set the scsi_cmnd->allowed value and were expecting
up to $allowed retries. The problem is that before:
commit 6aded12b10 ("scsi: core: Remove struct scsi_request")
we used to set the retries on the scsi_request then copy them over to
scsi_cmnd->allowed in scsi_setup_scsi_cmnd. With that patch we now set
scsi_cmnd->allowed to 0 in scsi_prepare_cmd and overwrite what the
passthrough user set.
This moves the allowed initialization to after the blk_rq_is_passthrough()
check so it's only done for the non-passthrough path where the ULD
init_command will normally set an allowed value it prefers.
Link: https://lore.kernel.org/r/20220812011206.9157-1-michael.christie@oracle.com
Fixes: 6aded12b10 ("scsi: core: Remove struct scsi_request")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes and trivial updates. The major new core update
is a change to the way device, target and host reference counting is
done to try to make it more robust (this change has soaked for a while
to try to winkle out any bugs).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYveemSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheaiAP9DPQ70
7hEdak6evXUwlWwlVBvEFAfZlzpHN+uNzUCvpgD+N61RSPhHV1hXu12sVMmjMNEb
pow+ee47Mc0t/OO68jA=
=1yQh
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
When alloc ctrl mem fails, the reply_map will subsequently be freed in
megasas_free_ctrl_mem(). No need to free it in megasas_alloc_ctrl_mem().
Link: https://lore.kernel.org/r/1659424740-46918-1-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When allocating log_to_span fails, kfree(instance->ctrl_context) is called
twice. Remove redundant call.
Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The error path for the SCSI check condition of not ready, target in ALUA
state transition, will result in the failure of that path after the retries
are exhausted. In most cases that is well ahead of the transition timeout
established in the SCSI ALUA device handler.
Instead, reprep the command and re-add it to the queue after a 1 second
delay. This will allow the handler to take care of the timeout and only
fail the path if the target has exceeded the transition expiry timeout
(default 60 seconds). If the expiry timeout is exceeded, the handler will
change the path state from transitioning to standby leading to a path
failure eliminating the potential of this re-prep to continue endlessly. In
most cases the target will exit the transitioning state well before the
expiry timeout but after the retries are exhausted as mentioned.
Additionally remove the scsi_io_completion_reprep() function which provides
little value.
Link: https://lore.kernel.org/r/20220729214110.58576-1-brian@purestorage.com
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Krishna Kant <krishna.kant@purestorage.com>
Acked-by: Seamus Connor <sconnor@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This partially reverts commit d2b292c3f6 ("scsi: qla2xxx: Enable ATIO
interrupt handshake for ISP27XX")
For some workloads where the host sends a batch of commands and then
pauses, ATIO interrupt coalesce can cause some incoming ATIO entries to be
ignored for extended periods of time, resulting in slow performance,
timeouts, and aborted commands.
Disable interrupt coalesce and re-enable the dedicated ATIO MSI-X
interrupt.
Link: https://lore.kernel.org/r/97dcf365-89ff-014d-a3e5-1404c6af511c@cybernetics.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Add support for syscall stack randomization.
- Add support for atomic operations to the 32 & 64-bit BPF JIT.
- Full support for KASAN on 64-bit Book3E.
- Add a watchdog driver for the new PowerVM hypervisor watchdog.
- Add a number of new selftests for the Power10 PMU support.
- Add a driver for the PowerVM Platform KeyStore.
- Increase the NMI watchdog timeout during live partition migration, to avoid timeouts
due to increased memory access latency.
- Add support for using the 'linux,pci-domain' device tree property for PCI domain
assignment.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas
Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz,
Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg
Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna
Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant,
Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, Zhouyi Zhou.
-----BEGIN PGP SIGNATURE-----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=tRkm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=Bv19
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr). The main driver change that might cause issues on down the
road is the conversion of some of our oldest surviving drivers to the
DMA API (should only affect m68k). The only major core change is the
rework of async resume; the rest are either completely trivial or for
updating deprecated APIs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYuvakyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfvOAP4m0N6b
e3JwoBtB1c0JMKv6G4gka8suEG8p5f4khDu8wwD+LfGUCzG49Y5Ts7rByXfEiGgO
krSdwsAZiV6yKg/HuPw=
=Ak9L
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Replace 'the the' with 'the' in the comment.
Link: https://lore.kernel.org/r/20220722094612.78583-1-slark_xiao@163.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable cmd_type is assigned a value but it is never read. The
variable and the assignment are redundant and can be removed.
Cleans up clang scan build warning:
drivers/scsi/megaraid/megaraid_sas_fusion.c:3228:10: warning: Although
the value stored to 'cmd_type' is used in the enclosing expression, the
value is never actually read from 'cmd_type' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220730124509.148457-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable bm_int_st is assigned a value but it is never read. The
variable and the assignment are redundant and can be removed.
Cleans up clang scan build warning:
drivers/scsi/FlashPoint.c:1726:7: warning: Although the value stored
to 'bm_int_st' is used in the enclosing expression, the value is never
actually read from 'bm_int_st' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220730123736.147758-1-colin.i.king@gmail.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two .exit_cmd_priv implementations. Both implementations use
resources associated with the SCSI host. Make sure that these resources are
still available when .exit_cmd_priv is called by moving the .exit_cmd_priv
calls from scsi_host_dev_release() to scsi_forget_host(). Moving
blk_mq_free_tag_set() from scsi_host_dev_release() to scsi_remove_host() is
safe because scsi_forget_host() waits until all SCSI devices associated
with the host have been removed.
Fix the following use-after-free:
==================================================================
BUG: KASAN: use-after-free in srp_exit_cmd_priv+0x27/0xd0 [ib_srp]
Read of size 8 at addr ffff888100337000 by task multipathd/16727
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x5e/0x5db
kasan_report+0xab/0x120
srp_exit_cmd_priv+0x27/0xd0 [ib_srp]
scsi_mq_exit_request+0x4d/0x70
blk_mq_free_rqs+0x143/0x410
__blk_mq_free_map_and_rqs+0x6e/0x100
blk_mq_free_tag_set+0x2b/0x160
scsi_host_dev_release+0xf3/0x1a0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
device_release+0x54/0xe0
kobject_put+0xa5/0x120
scsi_device_dev_release_usercontext+0x4c1/0x4e0
execute_in_process_context+0x23/0x90
device_release+0x54/0xe0
kobject_put+0xa5/0x120
scsi_disk_release+0x3f/0x50
device_release+0x54/0xe0
kobject_put+0xa5/0x120
disk_release+0x17f/0x1b0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
dm_put_table_device+0xa3/0x160 [dm_mod]
dm_put_device+0xd0/0x140 [dm_mod]
free_priority_group+0xd8/0x110 [dm_multipath]
free_multipath+0x94/0xe0 [dm_multipath]
dm_table_destroy+0xa2/0x1e0 [dm_mod]
__dm_destroy+0x196/0x350 [dm_mod]
dev_remove+0x10c/0x160 [dm_mod]
ctl_ioctl+0x2c2/0x590 [dm_mod]
dm_ctl_ioctl+0x5/0x10 [dm_mod]
__x64_sys_ioctl+0xb4/0xf0
dm_ctl_ioctl+0x5/0x10 [dm_mod]
__x64_sys_ioctl+0xb4/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/r/20220728221851.1822295-5-bvanassche@acm.org
Fixes: 65ca846a53 ("scsi: core: Introduce {init,exit}_cmd_priv()")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Swap two statements in scsi_device_put() now that it is guaranteed that
SCSI hosts outlive SCSI devices. Remove the reference counting code from
scsi_sysfs.c that became superfluous because SCSI hosts now outlive SCSI
devices.
Link: https://lore.kernel.org/r/20220728221851.1822295-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ bvanassche: Extracted this patch from a larger patch ]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the race conditions between SCSI LLD kernel module unloading and SCSI
device and target removal by making sure that SCSI hosts are destroyed
after all associated target and device objects have been freed.
Link: https://lore.kernel.org/r/20220728221851.1822295-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ bvanassche: Reworked Ming's patch and split it ]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit prevents that the following sequence triggers a kernel crash:
- Deletion of a SCSI device is requested via sysfs. Device removal takes
some time because blk_cleanup_queue() is waiting for the SCSI error
handler.
- The SCSI target associated with that SCSI device is removed.
- scsi_remove_target() returns and its caller frees the resources
associated with the SCSI target.
- The error handler makes progress and invokes an LLD callback that
dereferences the SCSI target pointer.
Link: https://lore.kernel.org/r/20220728221851.1822295-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function alloc_workqueue() in lpfc_sli4_driver_resource_setup() can
fail, but there is no check of its return value. The return value should be
checked.
Link: https://lore.kernel.org/r/20220723064027.2956623-1-williamsukatube@163.com
Fixes: 3cee98db26 ("scsi: lpfc: Fix crash on driver unload in wq free")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
powerpc's asm/prom.h brings some headers that it doesn't need itself.
Once those headers are removed from asm/prom.h, the following
errors occur:
CC [M] drivers/scsi/cxlflash/ocxl_hw.o
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_map_irq':
drivers/scsi/cxlflash/ocxl_hw.c:195:16: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration]
195 | virq = irq_create_mapping(NULL, irq->hwirq);
| ^~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c:222:9: error: implicit declaration of function 'irq_dispose_mapping' [-Werror=implicit-function-declaration]
222 | irq_dispose_mapping(virq);
| ^~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/ocxl_hw.c: In function 'afu_unmap_irq':
drivers/scsi/cxlflash/ocxl_hw.c:264:13: error: implicit declaration of function 'irq_find_mapping'; did you mean 'is_cow_mapping'? [-Werror=implicit-function-declaration]
264 | if (irq_find_mapping(NULL, irq->hwirq)) {
| ^~~~~~~~~~~~~~~~
| is_cow_mapping
cc1: some warnings being treated as errors
Fix it by including linux/irqdomain.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c6c0cc5e9179a642370a61439f95158271a78c03.1657264228.git.christophe.leroy@csgroup.eu
Initialising global and static variables to 0 is unnecessary. Remove the
initialisation.
Link: https://lore.kernel.org/r/20220723091620.5463-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During system shutdown or reboot, mpt3sas will reset the firmware back to
ready state. However, the driver leaves running a watchdog work item
intended to keep the firmware in operational state. This causes a second,
unneeded reset on shutdown and moves the firmware back to operational
instead of in ready state as intended. And if the mpt3sas_fwfault_debug
module parameter is set, this extra reset also panics the system.
mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the
firmware back to ready state.
Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com
Fixes: fae21608c3 ("scsi: mpt3sas: Transition IOC to Ready state during shutdown")
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host optimal sectors limit.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.
For performance reasons set the request queue max_sectors from
dma_opt_mapping_size(), which knows this mapping limit.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.
New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.
It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.
Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The shost->max_sectors is repeatedly capped according to the host DMA
mapping limit for each sdev in __scsi_init_queue(). This is unnecessary, so
set only once when adding the host.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently if a phy reset or enable phy is issued via sysfs when controller
is suspended, those operations will be ignored as SAS_HA_REGISTERED is
cleared. If RPM is enabled then we may aggressively suspend automatically.
In this case it may be difficult to enable or reset a phy via sysfs, so
resume the host in these scenarios.
Link: https://lore.kernel.org/r/1657823002-139010-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the I/O completion response frame returned by the target device has been
written to the host memory and the err bit in the status field of the
received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will
let EH analyze and further determine cause of failure.
Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned
normally. If the cq of SMP I/O is returned with exception actually SMP TAS
is never unmapped. Relocate DMA unmap of SMP task to fix the issue.
Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP
IOs, and remove unnecessary variable n_elem_req.
Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is duplicated code between slave_configure_v3_hw() and
hisi_sas_slave_configure(), so call common function
hisi_sas_slave_configure() from slave_configure_v3_hw().
Link: https://lore.kernel.org/r/1657823002-139010-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This code is indented one more tab than it should be.
Link: https://lore.kernel.org/r/YtVCFshEJNC7ELid@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is some clean up necessary before returning. Smatch complains:
drivers/scsi/mpi3mr/mpi3mr_fw.c:4786 mpi3mr_soft_reset_handler()
warn: inconsistent returns '&mrioc->reset_mutex'.
Locked on : 4730
Unlocked on: 4786
Link: https://lore.kernel.org/r/YtVCEsxMU8buuMjP@kili
Fixes: f10af05732 ("scsi: mpi3mr: Resource Based Metering")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reduce the VD queue depth on detecting the throttling condition.
[mkp: incorporate fix for pointer cast issue reported by the test
robot and Guenter Roeck]
Link: https://lore.kernel.org/r/20220708195020.8323-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver to track cumulative pending large data size at the controller
level and at the throttle group level. When one of the values meet or
exceed the controller's firmware-determined high threshold value, then the
driver will divert future selective I/O to the firmware. Once both
controller level and at the throttle group level cumulative pending large
data size reach controller's firmware determined low threshold value, then
the driver will stop diverting I/Os to the firmware.
Link: https://lore.kernel.org/r/20220708195020.8323-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com
Cc: <stable@vger.kernel.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
vref_count took an extra decrement in the task management path. Add an
extra ref count to compensate the imbalance.
Link: https://lore.kernel.org/r/20220713052045.10683-7-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes IKE message being dropped due to error in processing Purex
IOCB and Continuation IOCBs.
Link: https://lore.kernel.org/r/20220713052045.10683-6-njavali@marvell.com
Fixes: fac2807946 ("scsi: qla2xxx: edif: Add extraction of auth_els from the wire")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some platforms, the current logic of relying on finding new packet
solely based on signature pattern can lead to driver reading stale
packets. Though this is a bug in those platforms, reduce such exposures by
limiting reading packets until the IN pointer.
Two module parameters are introduced:
ql2xrspq_follow_inptr:
When set, on newer adapters that has queue pointer shadowing, look for
response packets only until response queue in pointer.
When reset, response packets are read based on a signature pattern
logic (old way).
ql2xrspq_follow_inptr_legacy:
Like ql2xrspq_follow_inptr, but for those adapters where there is no
queue pointer shadowing.
Link: https://lore.kernel.org/r/20220713052045.10683-5-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While requesting a new mailbox command, driver does not write any data to
unused registers. Initialize the unused register value to zero while
requesting a new mailbox command to prevent stale entry access by firmware.
Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve static type checking by using the new blk_opf_t type for variables
that represent request flags.
Cc: Hannes Reinecke <hare@suse.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-43-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_opf_t type for arguments and variables that represent
request flags. Use the !! operator in scsi_noretry_cmd() to convert the
blk_opf_t type into a boolean. This patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-42-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch prepares for introducing the new blk_opf_t type in the SCSI core.
Since the value returned by scsi_noretry_cmd() is only used in boolean
expressions, this patch does not change any functionality.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-41-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the new blk_opf_t type for the
combination of a request operation and its flags.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-40-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/165730608687.177165.11815510982277242966.stgit@brunhilda
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyright to current year.
Link: https://lore.kernel.org/r/165730608177.177165.13184715486635363193.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow user to override the default driver timeout for controller ready.
There are some rare configurations which require the driver to wait longer
than the normal 3 minutes for the controller to complete its bootup
sequence and be ready to accept commands from the driver.
The module parameter is:
ctrl_ready_timeout= { 0 | 30-1800 }
and specifies the timeout in seconds for the driver to wait for controller
ready. The valid range is 0 or 30-1800. The default value is 0, which
causes the driver to use a timeout of 180 seconds (3 minutes).
Link: https://lore.kernel.org/r/165730607666.177165.9221211345284471213.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change removing a LUN using sysfs from an internal driver function
pqi_remove_all_scsi_devices() to using the .slave_destroy entry in the
scsi_host_template.
A LUN can be deleted via sysfs using this syntax:
echo 1 > /sys/block/sdX/device/delete
Link: https://lore.kernel.org/r/165730607154.177165.9723066932202995774.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow SMP affinity to be changeable by disabling managed interrupts.
On distributions where the driver is enabled for multi-queue support the
driver utilizes kernel managed interrupts, which automatically distributes
interrupts to all available CPUs and assigns SMP affinity.
On most distributions, the affinity can not be changed by the user.
This change will allow managed interrupts to be disabled by the user via a
module parameter while still allowing multi-queue support to function
properly.
Use the module parameter disable_managed_interrupts=1
Link: https://lore.kernel.org/r/165730606638.177165.12846020942931640329.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a rare stale RAID map access when performing AIO during a RAID
configuration change.
A race condition in the driver could cause it to access a stale RAID map
when a logical volume is reconfigured.
Modify the driver logic to invalidate a RAID map very early when a RAID
configuration change is detected and only switch to a new RAID map after
the driver detects that the RAID map has changed.
Link: https://lore.kernel.org/r/165730606128.177165.7671413443814750829.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change method used to detect controller firmware crash during PQI reset.
PQI reset can fail with error -6 if firmware takes > 100ms to complete
reset.
Method used by driver to detect controller firmware crash during PQI was
incorrect in some cases.
Link: https://lore.kernel.org/r/165730605108.177165.1132931838384767071.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the PCI ID for (values in hex):
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec SmartHBA 2100-8i-o 9005 / 0285 / 9005 / 0659
Link: https://lore.kernel.org/r/165730604089.177165.17257514581321583667.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fail all outstanding requests after a PCI linkdown.
Block access to device SCSI attributes during the following conditions:
"Cable pull" is called PQI_CTRL_SURPRISE_REMOVAL.
"PCIe Link Down" is called PQI_CTRL_GRACEFUL_REMOVAL.
Block access to device SCSI attributes during and in rare instances when
the controller goes offline.
Either outstanding requests or the access of SCSI attributes post linkdown
can lead to a hang.
Post linkdown, driver does not fail the outstanding requests leading to
long wait time before all the IOs eventually fail.
Also access of the SCSI attributes by host applications can lead to a
system hang.
Link: https://lore.kernel.org/r/165730603578.177165.4699352086827187263.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add driver support for up to 256 LUNs per device.
Update AIO path to pass the appropriate LUN number for base-code to target
the correct LUN.
Update RAID IO path to pass the appropriate LUN number for FW to target the
correct LUN.
Pass the correct LUN number while doing a LUN reset.
Count the outstanding commands based on LUN number. While removing a
Multi-LUN device, wait for all outstanding commands to complete for all
LUNs.
Add Feature bit support.
Link: https://lore.kernel.org/r/165730603067.177165.14016422176841798336.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Insert a minimum 1 millisecond delay after writing to a register before
reading from it.
SIS and PQI registers that can be both written to and read from can return
stale data if read from too soon after having been written to.
There is no read/write ordering or hazard detection on the inbound path to
the MSGU from the PCIe bus, therefore reads could pass writes.
Link: https://lore.kernel.org/r/165730602555.177165.11181012469428348394.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print controller firmware version to OS message log during driver
initialization or after OFA.
Link: https://lore.kernel.org/r/165730601536.177165.17698744242908911822.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check the response code returned from the LUN reset task management
function and if it indicates the LUN is not valid, do not retry.
Reduce rescan worker delay to 5 seconds for the event handler only.
The removal of a drive from the OS could have been delayed up to 30 seconds
after being physically pulled.
The driver was retrying a LUN reset 3 times even though the return code
indiciated the LUN was no longer valid. There was a 10 second delay between
each retry. Additionally, the rescan worker was scheduled to run 10 seconds
after the driver received the event.
Link: https://lore.kernel.org/r/165730601025.177165.9416869335174437006.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Negotiated link rate needs to be updated to 'Disabled' when phy is stopped.
Link: https://lore.kernel.org/r/20220708205026.969161-1-changyuanl@google.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the data flow of the max/min linkrate in the driver is
* in pm8001_get_lrate_mode():
hardcoded value ==> struct sas_phy
* in pm8001_bytes_dmaed():
struct pm8001_phy ==> struct sas_phy
* in pm8001_phy_control():
libsas data ==> struct pm8001_phy
Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields
in struct pm8001_phy are not initialized, sysfs
`/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`.
To fix the issue, change the dataflow to the following:
* in pm8001_phy_init():
initial value ==> struct pm8001_phy
* in pm8001_get_lrate_mode():
struct pm8001_phy ==> struct sas_phy
* in pm8001_phy_control():
libsas data ==> struct pm8001_phy
For negotiated linkrate, the current dataflow is:
* in pm8001_get_lrate_mode():
iomb data ==> struct asd_sas_phy ==> struct sas_phy
* in pm8001_bytes_dmaed():
struct asd_sas_phy ==> struct sas_phy
Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment
statements in pm8001_bytes_dmaed() are unnecessary and cleaned up.
Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@google.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refactor code from fnic probe into a different function so that
scsi layer initialization code is grouped together.
Also, add log messages for better debugging.
Link: https://lore.kernel.org/r/20220707205155.692688-1-kartilak@cisco.com
Co-developed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Signed-off-by: Gian Carlo Boffa <gcboffa@cisco.com>
Co-developed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The megaraid SCSI driver sets set->nr_maps as 3 if poll_queues is > 0, and
blk-mq actually initializes each map's nr_queues as nr_hw_queues.
Consequently the driver has to clear READ queue map's nr_queues, otherwise
the queue map becomes broken if poll_queues is set as non-zero.
Link: https://lore.kernel.org/r/20220706125942.528533-1-ming.lei@redhat.com
Fixes: 9e4bec5b2a ("scsi: megaraid_sas: mq_poll support")
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: sumit.saxena@broadcom.com
Cc: chandrakanth.patil@broadcom.com
Cc: linux-block@vger.kernel.org
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2022 for files modified in the 14.2.0.5 patch set.
Link: https://lore.kernel.org/r/20220701211425.2708-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.2.0.5
Link: https://lore.kernel.org/r/20220701211425.2708-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Menlo/Hornet adapter was never released to the field. As such, driver
code specific to the adapter is unnecessary and should be removed.
Link: https://lore.kernel.org/r/20220701211425.2708-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc_nvmet_prep_abort_wqe() has a lot of common code with
lpfc_sli_prep_abort_xri().
Delete lpfc_nvmet_prep_abort_wqe() as the wqe can be filled out using the
generic lpfc_sli_prep_abort_xri routine(). Add the wqec option to
lpfc_sli_prep_abort_xri() for lpfc_nvmet_prep_abort_wqe().
Link: https://lore.kernel.org/r/20220701211425.2708-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The RSCN_MEMENTO logic was to workaround a target that does not register
both FCP and NVMe FC4 types at the same time. This caused the
configuration to not produce a second RSCN for the NVMe FC4 type
registration in a timely manner. The intention of the RSCN_MEMENTO flag
was to always signal to try NVMe PRLI.
However, there are other FCP-only target arrays in correctly behaved
configurations that reject the NVMe PRLI followed by a LOGO leading to
never rediscovering the target after an issue_lip (as LOGO causes a repeat
of PLOGI/PRLIs).
Revert the RSCN_MEMENTO patch as it is causing correctly behaved configs to
fail while it exists only to succeed on a misbehaved config.
Link: https://lore.kernel.org/r/20220701211425.2708-9-jsmart2021@gmail.com
Fixes: 1045592fc9 ("scsi: lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During a target link bounce test, the driver sees a mismatch between the
NPortId and the WWPN on the node structures (ndlps) involved. When this
occurs, the driver "swaps" the ndlp and new_ndlp node parameters to restore
WWPN/DID uniqueness in the fc_nodes list per vport. However, the driver
neglected to swap the nlp_fc4_type in the ndlp passed to
lpfc_plogi_confirm_nport causing a failure to recover the NVMe PLOGI/PRLI
and ultimately the NVMe paths.
Correct confirm_nport to preserve the fc4 types from the new-ndlp when the
data is moved over ot the ndlp structure.
Link: https://lore.kernel.org/r/20220701211425.2708-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disabling FA-PWWN should be effective after port reset, but in some cases
it was found to be impossible to clear FA-PWWN usage without a driver
reload.
Clean up FA-PWWN flag management to make enable and disable of the feature
more robust.
Link: https://lore.kernel.org/r/20220701211425.2708-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to
issue the CMF WQE in lpfc_issue_cmf_sync_wqe.
If ret_val is non-zero, then free the iocbq request structure.
Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
VMID introduced an extra increment of cmd_pending, causing double-counting
of the I/O. The normal increment ios performed in lpfc_get_scsi_buf.
Link: https://lore.kernel.org/r/20220701211425.2708-5-jsmart2021@gmail.com
Fixes: 33c79741de ("scsi: lpfc: vmid: Introduce VMID in I/O path")
Cc: <stable@vger.kernel.org> # v5.14+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When providing a D_ID in XMIT_ELS_RSP64_CX iocb the PU field should
be set to 3 to describe the parameter being passed to firmware.
Link: https://lore.kernel.org/r/20220701211425.2708-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Malformed user input to debugfs results in buffer overflow crashes. Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_nvme_cancel_iocb(), a cqe is created locally from stack storage.
The code didn't initialize the total_data_placed word, inheriting stack
content.
Initialize the total_data_placed word.
Link: https://lore.kernel.org/r/20220701211425.2708-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For some technologies, e.g. an ATA bus, resuming can take multiple
seconds. Waiting for resume to finish can cause a very noticeable delay.
Hence this commit that restores the behavior from before "scsi: core: pm:
Rely on the device driver core for async power management" for most SCSI
devices.
This commit introduces a behavior change: if the START command fails, do
not consider this as a SCSI disk resume failure.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: ericspero@icloud.com
Cc: jason600.groome@gmail.com
Tested-by: jason600.groome@gmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the definition of SCSI_QUEUE_DELAY to just above the function that
uses it.
Link: https://lore.kernel.org/r/20220630195703.10155-2-bvanassche@acm.org
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was found by coccicheck:
drivers/scsi/megaraid/megaraid_sas_base.c:3950 process_fw_state_change_wq() warn: inconsistent indenting.
Link: https://lore.kernel.org/r/20220630074152.29171-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sdev_printk() will only accept messages up to 128 bytes.
Shorten strings exceeding 128 bytes avoid printing an incomplete sentence
like:
[ 475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
Link: https://lore.kernel.org/r/20220630024516.1571209-1-lizhijian@fujitsu.com
Suggested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable shared host tagset to make sure that total outstanding I/O count can
not exceed controller's can_queue setting.
Link: https://lore.kernel.org/r/20220628074848.5036-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a copy and paste bug here. It should check ".rsp" instead of
".req". The error message is copy and pasted as well so update that too.
Link: https://lore.kernel.org/r/YrK1A/t3L6HKnswO@kili
Fixes: 9c40c36e75 ("scsi: qla2xxx: edif: Reduce Initiator-Initiator thrashing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter
function so it may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCSI core code does not support reserved requests, so drop the
handling in fnic_pending_aborts_iter().
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-5-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCSI core code does not currently support reserved commands. As such,
requests which time-out would never be reserved, and scsi_timeout()
'reserved' arg should never be set.
Remove handling for reserved requests, drop the wrapper scsi_timeout()
as it now just calls scsi_times_out() always, and finally rename
scsi_times_out() -> scsi_timeout() to match the blk_mq_ops method name.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-2-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.
The i2o driver layer was removed in 2015 with commit 4a72a7af46
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.
The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.
Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org
Cc: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.
Before commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.
This was in turn fixed in commit 56f396146a ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.
Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.
Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.
Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable wlen is being assigned a value that is never read, it is being
re-assigned with a different value later on. The assignment is redundant
and can be removed.
Cleans up clang scan build warning:
drivers/scsi/fcoe/fcoe.c:1491:2: warning: Value stored to 'wlen'
is never read [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220623164710.76831-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It seems to me that mpt3sas driver is using dedicated workqueues and is not
calling schedule{,_delayed}_work{,_on}(). Then, there will be no work to
flush using flush_scheduled_work().
Link: https://lore.kernel.org/r/f3b97c7c-1094-4e46-20d8-4321716d6f3f@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in _base_sas_ioc_info(). Change 'cant' to
'can't'.
Also fix up whitespace.
Link: https://lore.kernel.org/r/20220617101103.3162-1-jiaming@nfschina.com
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The conn_send_pdu API is evil in that it returns a pointer to an
iscsi_task, but that task might have been freed already so you can't touch
it. This patch splits the task allocation and transmission, so functions
like iscsi_send_nopout() can access the task before its sent and do
whatever bookkeeping is needed before it is sent.
Link: https://lore.kernel.org/r/20220616224557.115234-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need the back lock when freeing a task, so we hold it when calling
__iscsi_put_task() from the completion path to make it easier and to avoid
having to retake it in that path. For iscsi_put_task() we just grabbed it
while also doing the decrement on the refcount but it's only really needed
if the refcount is zero and we free the task. This modifies
iscsi_put_task() to just take the lock when needed then has the xmit path
use it. Normally we will then not take the back lock from the xmit path. It
will only be rare cases where the network is so fast that we get a response
right after we send the header/data.
Link: https://lore.kernel.org/r/20220616224557.115234-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently require that the back_lock is held when calling the functions
that manipulate the iscsi_task refcount. The only reason for this is to
handle races where we are handling SCSI-ml EH callbacks and the cmd is
completing at the same time the normal completion path is running, and we
can't return from the EH callback until the driver has stopped accessing
the cmd. Holding the back_lock while also accessing the task->state made it
simple to check that a cmd is completing and also get/put a refcount at the
same time, and at the time we were not as concerned about performance.
The problem is that we don't want to take the back_lock from the xmit path
for normal I/O since it causes contention with the completion path if the
user has chosen to try and split those paths on different CPUs (in this
case abusing the CPUs and ignoring caching improves perf for some uses).
Begins to remove the back_lock requirement for iscsi_get/put_task by
removing the requirement for the get path. Instead of always holding the
back_lock we detect if something has done the last put and is about to call
iscsi_free_task(). A subsequent commit will then allow iSCSI code to do the
last put on a task and only grab the back_lock if the refcount is now zero
and it's going to call iscsi_free_task().
Link: https://lore.kernel.org/r/20220616224557.115234-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 5923d64b7a ("scsi: libiscsi: Drop taskqueuelock") added an extra
task->state because for commit 6f8830f5bb ("scsi: libiscsi: add lock
around task lists to fix list corruption regression") we didn't know why we
ended up with cmds on the list and thought it might have been a bad target
sending a response while we were still sending the cmd. We were never able
to get a target to send us a response early, because it turns out the bug
was just a race in libiscsi/libiscsi_tcp where:
1. iscsi_tcp_r2t_rsp() queues a r2t to tcp_task->r2tqueue.
2. iscsi_tcp_task_xmit() runs iscsi_tcp_get_curr_r2t() and sees we have a
r2t. It dequeues it and iscsi_tcp_task_xmit() starts to process it.
3. iscsi_tcp_r2t_rsp() runs iscsi_requeue_task() and puts the task on the
requeue list.
4. iscsi_tcp_task_xmit() sends the data for r2t. This is the final chunk
of data, so the cmd is done.
5. target sends the response.
6. On a different CPU from #3, iscsi_complete_task() processes the
response. Since there was no common lock for the list, the lists/tasks
pointers are not fully in sync, so could end up with list corruption.
Since it was just a race on our side, remove the extra check and fix up the
comments.
Link: https://lore.kernel.org/r/20220616224557.115234-7-michael.christie@oracle.com
Reviewed-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For software iSCSI, we do a session per host so there is no need to set the
target's can_queue since it's the same as the host one. Setting it just
results in extra atomic checks in the main I/O path.
Link: https://lore.kernel.org/r/20220616224557.115234-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we have more data, set the MSG_SENDPAGE_NOTLAST in case we go down the
sendpage path.
Link: https://lore.kernel.org/r/20220616224557.115234-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We don't always want to run the recv path from the network softirq because
when we have to have multiple sessions sharing the same CPUs, some sessions
can eat up the NAPI softirq budget and affect other sessions or users.
Allow us to queue the recv handling to the iscsi workqueue so we can have
the scheduler/wq code try to balance the work and CPU use across all
sessions' worker threads.
Note: It wasn't the original intent of the change but a nice side effect is
that for some workloads/configs we get a nice performance boost. For a
simple read heavy test:
fio --direct=1 --filename=/dev/dm-0 --rw=randread --bs=256K
--ioengine=libaio --iodepth=128 --numjobs=4
where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32%
throughput boost. We also see increases for small I/O IOPs tests but it's
not as high.
Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helpers to allow the drivers to run their recv paths from libiscsi's
workqueue.
Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that
it handles queueing of xmits only.
Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the system is shutting down, iscsid is not running so we will not get
a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown
will then hang waiting on userspace to remove the session.
This has libiscsi force the destruction of the session from the kernel when
iscsi_host_remove() is called from a driver's shutdown callout.
This fixes a regression added in qedi boot with commit d1f2ce7763 ("scsi:
qedi: Fix host removal with running sessions") which made qedi use the
common session removal function that waits on userspace instead of rolling
its own kernel based removal.
Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com
Fixes: d1f2ce7763 ("scsi: qedi: Fix host removal with running sessions")
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There
is currently no difference in behavior between NORMAL and SHUTDOWN, but in
a subsequent commit we will want to know when we are called from the
pci_driver shutdown callout vs remove/err_handler so we know when userspace
is up.
Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During qedi shutdown we need to stop the iSCSI layer from sending new nops
as pings and from responding to target ones and make sure there is no
running connection cleanups. Commit d1f2ce7763 ("scsi: qedi: Fix host
removal with running sessions") converted the driver to use the libicsi
helper to drive session removal, so the above issues could be handled. The
problem is that during system shutdown iscsid will not be running so when
we try to remove the root session we will hang waiting for userspace to
reply.
Add a helper that will drive the destruction of sessions like these during
system shutdown.
Link: https://lore.kernel.org/r/20220616222738.5722-5-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the next patch we allow drivers to drive session removal during
shutdown. In this case iscsid will not be running, so we need to detect
bound endpoints and disconnect them. This moves the bound ep check so we
now always check.
Link: https://lore.kernel.org/r/20220616222738.5722-4-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_if_stop_conn() is only called from the userspace interface but in a
subsequent commit we will want to call it from the kernel interface to
allow drivers like qedi to remove sessions from inside the kernel during
shutdown. This removes the iscsi_uevent code from iscsi_if_stop_conn() so we
can call it in a new helper.
Link: https://lore.kernel.org/r/20220616222738.5722-3-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If qla4xxx doesn't remove the connection before the session, the iSCSI
class tries to remove the connection for it. We were doing a
iscsi_put_conn() in the iter function which is not needed and will result
in a use after free because iscsi_remove_conn() will free the connection.
Link: https://lore.kernel.org/r/20220616222738.5722-2-michael.christie@oracle.com
Tested-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.
Link: https://lore.kernel.org/r/20220616080210.18531-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clear wait for mailbox interrupt flag to prevent stale mailbox:
Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps).
Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ...
To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging
the mailbox. When the stale mailbox completion does arrive, it will be
dropped.
Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com
Fixes: b6faaaf796 ("scsi: qla2xxx: Serialize mailbox request")
Cc: Naresh Bannoth <nbannoth@in.ibm.com>
Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Cc: stable@vger.kernel.org
Reported-by: Naresh Bannoth <nbannoth@in.ibm.com>
Tested-by: Naresh Bannoth <nbannoth@in.ibm.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCP-2 devices were not coming back online once they were lost, login
retries exhausted, and then came back up. Fix this by accepting RSCN when
the device is not online.
Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com
Fixes: 44c57f2058 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a debug print in the devloss callback.
Link: https://lore.kernel.org/r/20220616053508.27186-9-njavali@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FC target disappeared during port perturbation tests due to a race that
tramples target state. Fix the issue by adding state checks before
proceeding.
Link: https://lore.kernel.org/r/20220616053508.27186-8-njavali@marvell.com
Fixes: 44c57f2058 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a mix of FCP-2 (tape) and non-FCP-2 targets are present, FCP-2 target
state was incorrectly transitioned when both of the targets were gone. Fix
this by ignoring state transition for FCP-2 targets.
Link: https://lore.kernel.org/r/20220616053508.27186-7-njavali@marvell.com
Fixes: 44c57f2058 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Put adapter into a wind down state if OS does not make any attempt to
recover the adapter after PCIe error.
Link: https://lore.kernel.org/r/20220616053508.27186-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FW requires minimum 72 bytes buffer size for D_port result. Buffer size
1024 is mentioned in the FW spec so buffer size is increased to 1024.
Rewrite the logic to handle START/RESTART command from SDMAPI.
Link: https://lore.kernel.org/r/20220616053508.27186-3-njavali@marvell.com
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable printing I/O error messages by default. The messages will be
printed only when logging was enabled.
Link: https://lore.kernel.org/r/20220616053508.27186-2-njavali@marvell.com
Fixes: 8e2d81c6b5 ("scsi: qla2xxx: Fix excessive messages during device logout")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_data_xmit() (TX worker) is iterating over the queue of new SCSI
commands concurrently with the queue being replenished. Only after the
queue is emptied will we start sending pending DataOut PDUs. That leads to
DataOut timeout on the target side and to connection reinstatement.
Give priority to pending DataOut commands over new commands.
Link: https://lore.kernel.org/r/20220607131953.11584-1-d.bogdanov@yadro.com
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 05c6c029a4 ("scsi: pm80xx: Increase number of supported
queues"), support for 80xx chip was improved by enabling multiple HW
queues.
In this, like other SCSI MQ HBA drivers at the time, the HW queues were not
exposed to upper layer, and instead the driver managed the queues
internally.
However, this management duplicates blk-mq code. In addition, the HW queue
management is sub-optimal for a system where the number of CPUs exceeds the
HW queues - this is because queues are selected in a round-robin fashion,
when it would be better to make adjacent CPUs submit on the same queue. And
finally, the affinity of the completion queue interrupts is not set to
mirror the cpu<->HQ queue mapping, which is suboptimal.
As such, for when MSIX is supported, expose HW queues to upper layer. We
always use queue index #0 for "internal" commands, i.e. anything which does
not come from the block layer, so omit this from the affinity spreading.
Link: https://lore.kernel.org/r/1654879602-33497-5-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In pm8001_tag_alloc() we don't require atomic set_bit() as we are already
in atomic context. In pm8001_tag_free() we should use the same host
spinlock to protect clearing the tag (and then don't require the atomic
clear_bit()).
Link: https://lore.kernel.org/r/1654879602-33497-4-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current code is buggy in that the tags are set up after they are needed
in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag
depth is earlier read in pm80xx_chip_init() -> read_main_config_table().
Add a post init callback to do the pm80xx work which needs to be done after
reading the tags. I don't see a better way to do this.
Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some values in pm8001_prep_sas_ha_init() are set the same as they would be
set in scsi_host_alloc(), or could be in the sht (which would be better),
or later just overwritten, so rework the following:
- cmd_per_lun can be set in the sht
- max_lun and max_channel are as scsi_host_alloc() (so no need to set)
- can_queue is later overwritten (so don't set in
pm8001_prep_sas_ha_init())
Link: https://lore.kernel.org/r/1654879602-33497-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.
This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().
Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]
Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com
Fixes: 3034ebe263 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the sub-queues and event pool resources are allocated/freed for
every CRQ connection event such as reset and LPM. This exposes the driver
to a couple issues. First the inefficiency of freeing and reallocating
memory that can simply be resued after being sanitized. Further, a system
under memory pressue runs the risk of allocation failures that could result
in a crippled driver. Finally, there is a race window where command
submission/compeletion can try to pull/return elements from/to an event
pool that is being deleted or already has been deleted due to the lack of
host state around freeing/allocating resources. The following is an example
of list corruption following a live partition migration (LPM):
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1
NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10
REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f
CFAR: c0000000001f55bc IRQMASK: 0
GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e
GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027
GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000
GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300
GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000
GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300
NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100
LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100
Call Trace:
[c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable)
[c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc]
[c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc]
[c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc]
[c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc]
[c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc]
[c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0
[c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78
3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640
---[ end trace 11a2b65a92f8b66c ]---
ibmvfc 30000003: Send warning. Receive queue closed, will retry.
Add registration/deregistration helpers that are called instead during
connection resets to sanitize and reconfigure the queues.
Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com
Fixes: 3034ebe263 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request. While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.
Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.
Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).
Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 3d9c3dcc58 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use memset_startat() helper to simplify the code, no functional changes.
Link: https://lore.kernel.org/r/20220613021851.59699-1-xiujianfeng@huawei.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the
iscsi_uevent. The iscsid validates a received endpoint ID and treats zero
as an error. The commit referenced in the fixes line changed the endpoint
ID range, and zero is always assigned to the first endpoint ID. So, the
first attempt to create a new iSER connection always fails.
Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com
Fixes: 3c6ae371b8 ("scsi: iscsi: Release endpoint ID when its freed")
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Similarly to sas report general and discovery responses, define the
structure struct smp_rps_resp to handle SATA PHY report responses using a
structure with a size that is exactly equal to the sas defined response
size.
With this change, struct smp_resp becomes unused and is removed.
Link: https://lore.kernel.org/r/20220609022456.409087-4-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_ex_change_count’,
inlined from ‘sas_find_bcast_dev’ at
drivers/scsi/libsas/sas_expander.c:1816:8:
drivers/scsi/libsas/sas_expander.c:1781:20: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[32]’ [-Warray-bounds]
1781 | if (rg_resp->result != SMP_RESP_FUNC_ACC) {
| ~~~~~~~^~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_rg_resp for sas report general responses.
Link: https://lore.kernel.org/r/20220609022456.409087-3-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_phy_change_count’,
inlined from ‘sas_find_bcast_phy.constprop’ at
drivers/scsi/libsas/sas_expander.c:1737:9:
drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[56]’ [-Warray-bounds]
1697 | *pcc = disc_resp->disc.change_count;
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_disc_resp for sas discovery operations.
Since this structure and the generic struct smp_resp are identical for
the little endian and big endian archs, move the definition of these
structures at the end of include/scsi/sas.h to avoid repeating their
definition.
Link: https://lore.kernel.org/r/20220609022456.409087-2-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experience slow recovery when target device went through a stop/start
of the authentication application (app_stop/app_start).
Between the period of app_stop and app_start on the target device, target
device choose to send ELS Reject for any receive AUTH ELS command. At this
time, authentication application does not do ELS reject if it encounters
error.
Therefore, AUTH ELS reject signify authentication application is not
running. If driver passes up the AUTH ELS Reject to the authentication
application, then it would result in authentication application
retrying/resending the same AUTH ELS command again + delay.
As a work around, driver should trigger a session tear down where it tells
the local authentication application to also tear down. At the next
relogin, both sides are then synchronized.
Link: https://lore.kernel.org/r/20220608115849.16693-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For N2N + remote WWPN is bigger than local adapter, remote adapter will
login to local adapter while authentication application is not running.
When authentication application starts, the current session in FW needs to
to be invalidated.
Make sure the old session is torn down before triggering a relogin.
Link: https://lore.kernel.org/r/20220608115849.16693-9-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver failed to send implicit logout on session delete. For edif, this
failed to flush any lingering SA index in FW.
Set a flag to turn on implicit logout early in the session recovery to make
sure the logout will go out in case of error.
Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code prematurely sends out PRLI before authentication application
has given the OK to do so. This causes PRLI failure and session teardown.
Prevents PRLI from going out before authentication app gives the OK.
Link: https://lore.kernel.org/r/20220608115849.16693-7-njavali@marvell.com
Fixes: 91f6f5fbe8 ("scsi: qla2xxx: edif: Reduce connection thrash")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If all keys for a session have been deleted, trigger a session teardown.
Link: https://lore.kernel.org/r/20220608115849.16693-6-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The scenario is this: User loaded driver but has not started authentication
app. All sessions to secure device will exhaust all login attempts, fail,
and in stay in deleted state. Then some time later the app is started. The
driver will replenish the login retry count, trigger delete to prepare for
secure login. After deletion, relogin is triggered.
For the session that is already deleted, the delete trigger is a no-op. If
none of the sessions trigger a relogin, no progress is made.
Add a relogin trigger.
Link: https://lore.kernel.org/r/20220608115849.16693-5-njavali@marvell.com
Fixes: 7ebb336e45 ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multiple app start can trigger a session bounce. Make driver skip over
session teardown if app start is seen more than once.
Link: https://lore.kernel.org/r/20220608115849.16693-4-njavali@marvell.com
Fixes: 7ebb336e45 ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the session is down and the local port continues to receive AUTH ELS
messages, the driver needs to send back LOGO so that the remote device
knows to tear down its session. Terminate and clean up the AUTH ELS
exchange followed by a passthrough LOGO.
Link: https://lore.kernel.org/r/20220608115849.16693-3-njavali@marvell.com
Fixes: 225479296c ("scsi: qla2xxx: edif: Reject AUTH ELS on session down")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current edif code does not keep track of FW IOCB resources. This led
to IOCB queue full on error recovery (I/O timeout). Make use of the
existing code that tracks IOCB resources to prevent over-subscription.
Link: https://lore.kernel.org/r/20220608115849.16693-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Based on the normalized pattern:
this program is free software you may redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 of the license the software is
provided as is without warranty of any kind express or implied
including but not limited to the warranties of merchantability fitness
for a particular purpose and noninfringement in no event shall the
authors or copyright holders be liable for any claim damages or other
liability whether in an action of contract tort or otherwise arising
from out of or in connection with the software or the use or other
dealings in the software
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you may redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 of the license the software is
provided as is without warranty of any kind express or implied
including but not limited to the warranties of merchantability fitness
for a particular purpose and noninfringement in no event shall the
authors or copyright holders be liable for any claim damages or other
liability whether in an action of contract tort or otherwise arising
from out of or in connection with the software or the use or other
dealings in the software
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix missing resource cleanup (when '(--i) == 0') for error case in
pmcraid_register_interrupt_handler().
Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.
Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I'm facing this warning when building for the parisc64 architecture:
drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’:
drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds]
5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ?
drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’
5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
| ^~~~~~~~~~~~~~~~~~~~~~~
The problem is, that only 20 bytes are allocated with kmalloc(), which is
sufficient to hold the bytes which are needed. Nevertheless, gcc complains
because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus
doesn't fit into those 20 bytes.
This patch simply allocates all 32 bytes (instead of 20) and thus avoids
the warning. There is no functional change introduced by this patch.
While touching the code I cleaned up to calculation of max_wideport_qd,
max_narrowport_qd and max_sata_qd to make it easier readable.
Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit
kernel.
Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use ida_alloc()/ida_free() instead of the deprecated
ida_simple_get()/ida_simple_remove() interface.
Link: https://lore.kernel.org/r/20220527083049.2552526-1-liuke94@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.
Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User failed to see disk via n2n topology. Driver used up all login retries
before authentication application started. When authentication application
started, driver did not have enough login retries to connect securely. On
app_start, driver will reset the login retry attempt count.
Link: https://lore.kernel.org/r/20220607044627.19563-10-njavali@marvell.com
Fixes: 4de067e5df ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Recently driver has implemented a new doorbell mechanism via bsg. The new
doorbell tells driver the exact buffer size application has where driver
can fill it up with events. The old doorbell guestimated application buffer
size is 256.
Remove duplicate functionality, the application has moved on to the new
doorbell interface.
Link: https://lore.kernel.org/r/20220607044627.19563-9-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Notify authentication application of a NPIV deletion event is about to
occur. This allows app to perform cleanup.
Link: https://lore.kernel.org/r/20220607044627.19563-7-njavali@marvell.com
Fixes: 9efea843a9 ("scsi: qla2xxx: edif: Add detection of secure device")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a thread is in the process of reestablish a session, a flag is set to
prevent multiple threads/triggers from doing the same task. This flag was
left on, and any attempt to relogin was locked out. Clear this flag if the
attempt has failed.
Link: https://lore.kernel.org/r/20220607044627.19563-6-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add bsg interface for app to read doorbell events. This interface lets
driver know how much app can read based on return buffer size. When the
next event(s) occur, driver will return the bsg_job with the event(s) in
the return buffer.
If there is no event to read, driver will hold on to the bsg_job up to few
seconds as a way to control the polling interval.
Link: https://lore.kernel.org/r/20220607044627.19563-5-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On session deletion, wait for app to acknowledge before moving on. This
allows both app and driver to stay in sync. In addition, this gives a
chance for authentication app to do any type of cleanup before moving on.
Link: https://lore.kernel.org/r/20220607044627.19563-4-njavali@marvell.com
Fixes: dd30706e73 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch uses GFFID switch command to scan whether remote device is
Target or Initiator mode. Based on that info, driver will not pass up
Initiator info to authentication application. This helps reduce unnecessary
stress for authentication application to deal with unused connections.
Link: https://lore.kernel.org/r/20220607044627.19563-2-njavali@marvell.com
Fixes: 7ebb336e45 ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.2.0.4
Link: https://lore.kernel.org/r/20220603174329.63777-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NVMe Asynchronous Event Request commands have no command timeout value per
specifications.
Set WQE option to allow a reduced FLUSH polling rate for I/O error
detection specifically for nvme_admin_async_event commands.
Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an NVMe command is aborted or completes with an ERSP, log the opcode
and command ID fields to help provide more detail on the failed command.
Link: https://lore.kernel.org/r/20220603174329.63777-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The
target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001. The target then sends a
LOGO to the fabric DID. lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps. The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.
Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.
Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A use-after-free crash can occur after an ELS LOGO is aborted.
Specifically, a nodelist structure is freed and then
ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the
discovery state machine is mistakenly called a second time with
NLP_EVT_DEVICE_RM argument.
Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a
nodelist structure.
Link: https://lore.kernel.org/r/20220603174329.63777-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calls to starget_to_rport() may return NULL. Add check for NULL rport
before dereference.
Link: https://lore.kernel.org/r/20220603174329.63777-5-jsmart2021@gmail.com
Fixes: bb21fc9911 ("scsi: lpfc: Use fc_block_rport()")
Cc: <stable@vger.kernel.org> # v5.18
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Following refactoring and consolidation in SLI processing, fix up some
minor issues related to SLI path:
- Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB.
- Fix some typographical errors.
- Fix duplicate log messages.
Link: https://lore.kernel.org/r/20220603174329.63777-4-jsmart2021@gmail.com
Fixes: 1b64aa9eae ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4")
Cc: <stable@vger.kernel.org> # v5.18
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refactoring and consolidation of abort paths:
- lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined
into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove
extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration.
- lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a
mismatched argument type. This may result in misleading log message
content. Update to the correct argument type of lpfc_iocbq instead of
lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the
lpfc_iocbq structure.
Link: https://lore.kernel.org/r/20220603174329.63777-3-jsmart2021@gmail.com
Fixes: 31a59f7570 ("scsi: lpfc: SLI path split: Refactor Abort paths")
Cc: <stable@vger.kernel.org> # v5.18
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct
BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed
and is still filling out the incorrect BDE type.
Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set
instead of BUFF_TYPE_BLP_64.
Link: https://lore.kernel.org/r/20220603174329.63777-2-jsmart2021@gmail.com
Fixes: 596fc8adb1 ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.
Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com
Signed-off-by: Wentao Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixing the interpretation of the length of the B9h VPD page (Concurrent
Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page
is the header with page number and length information. Adding 3 was likely
a misinterpretation of the SBC-5 specification which sets all offsets
starting at zero.
This fixes the error in dmesg:
[ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page
Link: https://lore.kernel.org/r/20220602225113.10218-4-tyler.erickson@seagate.com
Fixes: e815d36548 ("scsi: sd: add concurrent positioning ranges support")
Cc: stable@vger.kernel.org
Tested-by: Michael English <michael.english@seagate.com>
Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
-----BEGIN PGP SIGNATURE-----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=lBeb
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block
Pull block request execute cleanups from Jens Axboe:
"This change was advertised in the initial core block pull request, but
didn't actually make that branch as we deferred it to a post-merge
pull request to avoid a bunch of cross branch issues.
This series cleans up the block execute path quite nicely"
* tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block:
blk-mq: remove the done argument to blk_execute_rq_nowait
blk-mq: avoid a mess of casts for blk_end_sync_rq
blk-mq: remove __blk_execute_rq_nowait
The ql_dm_tgt_ex_pct parameter was introduced in commit ead038556f
("qla2xxx: Add Dual mode support in the driver"). Then the use of this
parameter was dropped in commit 99e1b683c4 ("scsi: qla2xxx: Add
ql2xiniexchg parameter").
Thus, remove ql_dm_tgt_ex_pct since it is no longer used.
Link: https://lore.kernel.org/r/AM9PR10MB41185ADE95B92B4E6926BE639DD49@AM9PR10MB4118.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
cppcheck reports
[drivers/scsi/qla2xxx/qla_mid.c:594]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it?
[drivers/scsi/qla2xxx/qla_mid.c:620]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it?
The functions qla25xx_free_req_que() and qla25xx_free_rsp_que() are
similar. They free a 'req' and a 'rsp' parameter respectively. The last
statement of both functions is setting the parameter to NULL. This has no
effect and can be removed.
Link: https://lore.kernel.org/r/20220521201607.4145298-1-trix@redhat.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following W=1 kernel warnings:
drivers/scsi/mpi3mr/mpi3mr_app.c:1706: warning: expecting prototype for
adapter_state_show(). Prototype was for adp_state_show() instead.
Link: https://lore.kernel.org/r/20220525093514.55467-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update pci_device_id table and generate reporting strings for ATTO Celerity
and ThunderLink Fibre Channel devices.
Link: https://lore.kernel.org/r/20220524125621.47102-1-bgrove@attotech.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Co-developed-by: Jason Seba <jseba@attotech.com>
Signed-off-by: Jason Seba <jseba@attotech.com>
Signed-off-by: Bradley Grove <bgrove@attotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the 'ALUA state transitioning' sense code is returned we cannot use
BLK_STS_AGAIN, as this has a very specific use-case. So return
BLK_STS_TRANSPORT here.
Link: https://lore.kernel.org/r/20220524055631.85480-3-hare@suse.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make sure to always free a scsi disk zone information, even for regular
disks. This ensures that there is no memory leak, even in the case of a
zoned disk changing type to a regular disk (e.g. with a reformat using the
FORMAT WITH PRESET command or other vendor proprietary command).
To do this, rename sd_zbc_clear_zone_info() to sd_zbc_free_zone_info() and
remove sd_zbc_release_disk(). A call to sd_zbc_free_zone_info() is added to
sd_zbc_read_zones() for drives for which sd_is_zoned() returns
false. Furthermore, sd_zbc_free_zone_info() code make s sure that the sdkp
rev_mutex is never used while not being initialized by gating the cleanup
code with a a check on the zone_wp_update_buf field as it is never NULL
when rev_mutex has been initialized.
Link: https://lore.kernel.org/r/20220601062544.905141-3-damien.lemoal@opensource.wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If sd_probe() sees an early error before sdkp->device is initialized,
sd_zbc_release_disk() is called. This causes a NULL pointer dereference
when sd_is_zoned() is called inside that function. Avoid this by removing
the call to sd_zbc_release_disk() in sd_probe() error path.
This change is safe and does not result in zone information memory leakage
because the zone information for a zoned disk is allocated only when
sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set,
resulting in sd_disk_release() being called when needed to cleanup a disk
zone information using sd_zbc_release_disk().
Link: https://lore.kernel.org/r/20220601062544.905141-2-damien.lemoal@opensource.wdc.com
Fixes: 89d9475610 ("sd: Implement support for ZBC devices")
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During driver unload, mrioc->bsg_device reference count becomes
negative. Also, as reported in [1], the driver's bsg_device model had few
more bugs. Fix all these up.
[1] https://marc.info/?l=linux-scsi&m=165183971411991&w=2
Link: https://lore.kernel.org/r/20220526170157.58274-1-sumit.saxena@broadcom.com
Fixes: 4268fa7513 ("scsi: mpi3mr: Add bsg device support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmKSSbcTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgJyCACeyMOcFws5lyqqdk0R0zGr2KFfKsJn
YQR9nvldT2p/1y0ykvU208UIq0HHmXOb9pD8gOUzGYGp4XlEaC1f4V37mmzgLcRu
vL/HcFqBl2cQEfaQxiXZrmsIIVszwbc57EGqpl93cS2er4hp/NXmredKCId7Mpt8
FjxjgVGzdhEUKbJZYjkDM5pYAnJ9QVwuK3MaarKMK86Oj1P5YtKgIb4ZSt/NHvsC
Mukx3nivSH29XfK3fRsFDJUQr9WNYh1cmTtyhB0tWVXQCYFc4angZRtCJwyXzkp2
P5GBIQoMZcXX2XWkUBTtA1w5g/aZZsBExb3YGhQjsQP+jb6MtDnvOEo9
=Z2E+
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Harden hv_sock driver (Andrea Parri)
- Harden Hyper-V PCI driver (Andrea Parri)
- Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo)
- Fix Hyper-V PCI to reduce boot time (Dexuan Cui)
- Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh
Sengar)
- Fix balloon driver error handling (Shradha Gupta)
- Fix a typo in vmbus driver (Julia Lawall)
- Ignore vmbus IMC device (Michael Kelley)
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
Let the caller set it together with the end_io_data instead of passing
a pointless argument. Note the the target code did in fact already
set it and then just overrode it again by calling blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The latest storvsc code has already removed the support for windows 7 and
earlier. There is still some code logic remaining which is there to support
pre Windows 8 OS. This patch removes these stale logic.
This patch majorly does three things :
1. Removes vmscsi_size_delta and its logic, as the vmscsi_request struct is
same for all the OS post windows 8 there is no need of delta.
2. Simplify sense_buffer_size logic, as there is single buffer size for
all the post windows 8 OS.
3. Embed the vmscsi_win8_extension structure inside the vmscsi_request,
as there is no separate handling required for different OS.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1653478022-26621-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This series consists of a small set of driver updates (lpfc, ufs,
mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small
fixes with very few core changes (the biggest one being VPD caching.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYo2WnyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfEiAP4zvniL
xidsiCXGQ4pWF4QW3UxukXpGh5xFREhNCYT9+QEA+DyilCALOI+ZT5GKu2V6gkby
R29ve48/NAWl3fwYjMQ=
=GPL1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
Hi Linus,
Please, pull the following patches that fix some -Wstringop-overflow
warnings when building with GCC-11. All the patches have been in
linux-next during the last development cycle.
This is part of the ongoing efforts to globally enable
-Wstringop-overflow.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=9lLb
-----END PGP SIGNATURE-----
Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wstringop-overflow fixes from Gustavo Silva:
"Fix some -Wstringop-overflow warnings when building with GCC-11. All
the patches have been in linux-next during the last development cycle.
This is part of the ongoing efforts to globally enable
-Wstringop-overflow"
* tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()
drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first argument
like ->read_folio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmKNMDUACgkQDpNsjXcp
gj4/mwf/bpHhXH4ZoNIvtUpTF6rZbqeffmc0VrbxCZDZ6igRnRPglxZ9H9v6L53O
7B0FBQIfxgNKHZpdqGdOkv8cjg/GMe/HJUbEy5wOakYPo4L9fZpHbDZ9HM2Eankj
xBqLIBgBJ7doKr+Y62DAN19TVD8jfRfVtli5mqXJoNKf65J7BkxljoTH1L3EXD9d
nhLAgyQjR67JQrT/39KMW+17GqLhGefLQ4YnAMONtB6TVwX/lZmigKpzVaCi4r26
bnk5vaR/3PdjtNxIoYvxdc71y2Eg05n2jEq9Wcy1AaDv/5vbyZUlZ2aBSaIVbtKX
WfrhN9O3L0bU5qS7p9PoyfLc9wpq8A==
=djLv
-----END PGP SIGNATURE-----
Merge tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.
Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In SCSI the midlayer has ownership of the request_queue, so on probe
failure we must only put the gendisk, but leave the request_queue alone.
Link: https://lore.kernel.org/r/20220523083813.227935-1-hch@lst.de
Fixes: 03252259e1 ("scsi: sd: Clean up gendisk if device_add_disk() failed")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).
Update the MAINTAINERS file. Add myself as a UFS reviewer.
Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Keoseong Park <keosung.park@samsung.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable toke is being assigned a value that is never read. The variable is
redundant, remove it.
Cleans up clang scan build warning:
warning: Although the value stored to 'toke' is used in the enclosing
expression, the value is never actually read from 'toke'
[deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220518102103.514701-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify the NVMe I/O path to look for VMID support and call the transport to
obtain the I/O's appid value.
Link: https://lore.kernel.org/r/20220519123110.17361-5-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rework lpfc_vmid_get_appid() arguments to remove scsi_cmnd dependency. The
function is now callable by the NVMe I/O path. Fix up SCSI call path to
accommodate the arg change.
Link: https://lore.kernel.org/r/20220519123110.17361-4-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove VMID code from its SCSI-specific location and move to a new file
solely for VMID code.
Link: https://lore.kernel.org/r/20220519123110.17361-3-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: Gaurav Srivastava <gaurav.srivastava@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
adpt_post_wait_lock was declared and initialized by DEFINE_SPINLOCK so we
don't need to call spin_lock_init(). Drop the call.
Link: https://lore.kernel.org/r/1652176024-3981-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable 'op' is assigned a value and is never read. The variable is
not used and is redundant, remove it.
Link: https://lore.kernel.org/r/20220517092518.93159-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The memories for the slot should be observed to be written prior to
observing the slot as ready.
Prior to commit 26fc0ea74f ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR"),
we had a spin_lock() + spin_unlock() immediately before marking the slot as
ready. The spin_unlock() - with release semantics - caused the slot memory
to be observed to be written.
Now that the spin_lock() + spin_unlock() is gone, use a smp_wmb().
Link: https://lore.kernel.org/r/1652774661-12935-1-git-send-email-john.garry@huawei.com
Fixes: 26fc0ea74f ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR")
Reported-by: Yihang Li <liyihang6@hisilicon.com>
Tested-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add sysfs attributes for exposing target device details such as SAS
address, firmware device handle, and persistent ID for the
controller-attached devices and RAID volumes.
Link: https://lore.kernel.org/r/20220517115310.13062-3-sreekanth.reddy@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
