IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As __assign_str() no longer uses its "src" parameter, there's a check to
make sure nothing depends on it being different than what was passed to
__string(). It originally just compared the pointer passed to __string()
with the pointer passed into __assign_str() via the "src" parameter. But
there's a couple of outliers that just pass in a quoted string constant,
where comparing the pointers is UB to the compiler, as the compiler is
free to create multiple copies of the same string constant.
Instead, just use strcmp(). It may slow down the trace event, but this
will eventually be removed.
Also, fix the issue of passing NULL to strcmp() by adding a WARN_ON() to
make sure that both "src" and the pointer saved in __string() are either
both NULL or have content, and then checking if "src" is not NULL before
performing the strcmp().
Link: https://lore.kernel.org/all/CAHk-=wjxX16kWd=uxG5wzqt=aXoYDf1BgWOKk+qVmAO0zh7sjA@mail.gmail.com/
Fixes: b1afefa62c ("tracing: Use strcmp() in __assign_str() WARN_ON() check")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Modify the Energy Model code to bail out and complain if the unit of
power is not uW to prevent errors due to unit mismatches (Lukasz Luba).
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König).
- Fix typo in the suspend and interrupts document (Saravana Kannan).
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar).
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar).
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski).
-----BEGIN PGP SIGNATURE-----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=dlQ/
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the Energy Model to make it prevent errors due to power
unit mismatches, fix a typo in power management documentation, convert
one driver to using a platform remove callback returning void, address
two cpufreq issues (one in the core and one in the DT driver), and
enable boost support in the SCMI cpufreq driver.
Specifics:
- Modify the Energy Model code to bail out and complain if the unit
of power is not uW to prevent errors due to unit mismatches (Lukasz
Luba)
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König)
- Fix typo in the suspend and interrupts document (Saravana Kannan)
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar)
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar)
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski)"
* tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Enable boost support
firmware: arm_scmi: Add support for marking certain frequencies as turbo
cpufreq: dt: always allocate zeroed cpumask
cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
Documentation: power: Fix typo in suspend and interrupts doc
PM: EM: Force device drivers to provide power in uW
powercap: intel_rapl: Convert to platform remove callback returning void
- Add markup to generate links from footnotes in the ACPI enumeration
document (Chris Packham).
- Update the handle_eject_request() kerneldoc comment to document the
arguments of the function and improve kerneldoc comments for ACPI
suspend and hibernation functions (Yang Li).
-----BEGIN PGP SIGNATURE-----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=nafx
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI documentation and kerneldoc comments.
Specifics:
- Add markup to generate links from footnotes in the ACPI enumeration
document (Chris Packham)
- Update the handle_eject_request() kerneldoc comment to document the
arguments of the function and improve kerneldoc comments for ACPI
suspend and hibernation functions (Yang Li)"
* tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions
ACPI: docs: enumeration: Make footnotes links
ACPI: Document handle_eject_request() arguments
- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet).
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich).
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven).
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam).
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka).
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown).
- Support variable TMU array size for new platforms (Peng Fan).
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio).
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=jtjA
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update thermal drivers for ARM platforms by adding new hardware
support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
Mediatek MT7896, thermal-of) and cleaning up code.
Specifics:
- Fix memory leak in the error path at probe time in the Mediatek
LVTS driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven)"
* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
- A single fix for ASMedia HBAs.
These HBAs do not indicate that they support SATA Port Multipliers
CAP.SPM (Supports Port Multiplier) is not set.
Likewise, they do not allow you to probe the devices behind an
attached PMP, as defined according to the SATA-IO PMP specification.
Instead, they have decided to implement their own version of PMP,
and because of this, plugging in a PMP actually works, even if the
HBA claims that it does not support PMP.
Revert a recent quirk for these HBAs, as that breaks ASMedia's own
implementation of PMP.
Unfortunately, this will once again give some users of these HBAs
significantly increased boot time. However, a longer boot time for
some, is the lesser evil compared to some other users not being able
to detect their drives at all.
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZfl1DxIcY2Fzc2VsQGtl
cm5lbC5vcmcACgkQyWQxo5nGTXLbfgD/YSHXSMFTch4waFnTVqbI73s8YY7MAf3N
Udis3pXUnL4A/24OxmRaWvE3esgura1puHbMUxgQuFSoxqiF+W47iGcJ
=JrQQ
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
"A single fix for ASMedia HBAs.
These HBAs do not indicate that they support SATA Port Multipliers
CAP.SPM (Supports Port Multiplier) is not set.
Likewise, they do not allow you to probe the devices behind an
attached PMP, as defined according to the SATA-IO PMP specification.
Instead, they have decided to implement their own version of PMP,
and because of this, plugging in a PMP actually works, even if the
HBA claims that it does not support PMP.
Revert a recent quirk for these HBAs, as that breaks ASMedia's own
implementation of PMP.
Unfortunately, this will once again give some users of these HBAs
significantly increased boot time. However, a longer boot time for
some, is the lesser evil compared to some other users not being able
to detect their drives at all"
* tag 'ata-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: asm1064: asm1166: don't limit reported ports
Per vq sizes in vdpa.
Info query for block devices support in vdpa.
DMA sync callbacks in vduse.
Fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX5PdQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRphP0H/iOUdjemA73k0+E1tX0fIrvTlgJcX4fT/nGn
bgFmV/52zBnTxEXse5sMoTPbpzU8omx88vuVzd9f1X6Uv1MpG8cpHIA0HDKbIxZo
vItLeSv5IacA1KBXfxXvf9069aCnEEdurvE+uAO+x8ngbG4FH3i63Yp0S3nMXYMr
Bl6V11pyusnLpW5HO0LAlETJRxz/3K4Z248LtTx19zzlIfmz+tKmUXozrocmD6Q9
Q1LAWCPKksUXj7t9zc2M92ZqUdSX8JQJpolWZi76MHlrh69YkAJ3gijtNIJv5tJB
Z17zhLUkhdy4b/6rdGlUK/T7bocYLU4fbRaM5xlsDhTWe2z3R1Q=
=Gde9
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Per vq sizes in vdpa
- Info query for block devices support in vdpa
- DMA sync callbacks in vduse
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits)
virtio_net: rename free_old_xmit_skbs to free_old_xmit
virtio_net: unify the code for recycling the xmit ptr
virtio-net: add cond_resched() to the command waiting loop
virtio-net: convert rx mode setting to use workqueue
virtio: packed: fix unmap leak for indirect desc table
vDPA: report virtio-blk flush info to user space
vDPA: report virtio-block read-only info to user space
vDPA: report virtio-block write zeroes configuration to user space
vDPA: report virtio-block discarding configuration to user space
vDPA: report virtio-block topology info to user space
vDPA: report virtio-block MQ info to user space
vDPA: report virtio-block max segments in a request to user space
vDPA: report virtio-block block-size to user space
vDPA: report virtio-block max segment size to user space
vDPA: report virtio-block capacity to user space
virtio: make virtio_bus const
vdpa: make vdpa_bus const
vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min
vDPA/ifcvf: get_max_vq_size to return max size
virtio_vdpa: create vqs with the actual size
...
Memory for the "checksums" pointer will leak if the data is rechecked
after checksum failure (because the associated kfree won't happen due
to 'goto skip_io').
Fix this by freeing the checksums memory before recheck, and just use
the "checksum_onstack" memory for storing checksum during recheck.
Fixes: c88f5e553f ("dm-integrity: recheck the integrity tag after a failure")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZfk4/AAKCRCAXGG7T9hj
vpBgAP9BtxbGtHlFEncQSscfktbcFgMQ6EiVwa7o9HEOuDimBwEAx1kqej0meNzE
BRRvDHIHhNQb2aQHz8Xu/3DdQ4i2YA0=
=6BT4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- Xen event channel handling fix for a regression with a rare kernel
config and some added hardening
- better support of running Xen dom0 in PVH mode
- a cleanup for the xen grant-dma-iommu driver
* tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: increment refcnt only if event channel is refcounted
xen/evtchn: avoid WARN() when unbinding an event channel
x86/xen: attempt to inflate the memory balloon on PVH
xen/grant-dma-iommu: Convert to platform remove callback returning void
read_poll_timeout inside phy_read_poll_timeout can set val negative
in some cases (for example, __mdiobus_read inside phy_read can return
-EOPNOTSUPP).
Supposedly, commit 4ec7329517 ("net: phylib: fix phy_read*_poll_timeout()")
should fix problems with wrong-signed vals, but I do not see how
as val is sent to phy_read as is and __val = phy_read (not val)
is checked for sign.
Change val type for signed to allow better error handling as done in other
phy_read_poll_timeout callers. This will not fix any error handling
by itself, but allows, for example, to modify cond with appropriate
sign check or check resulting val separately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 014068dcb5 ("net: phy: genphy_loopback: add link speed configuration")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240315175052.8049-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cirrus amps support for this laptop was added in patch:
33e5e648e6 ("ALSA: hda: cs35l41: Support additional HP Envy Models")
This patch adds fixes for wrong pincfgs, wrong DAC selection and
mute/micmute LEDs.
Signed-off-by: Anthony I Gilea <i@cpp.in>
Message-ID: <e2a7aaed-e9d7-4d36-8abf-b71dfd32a0ff@cpp.in>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 2c15a5aee2 ("net/sched: Load modules via their alias")
starts loading modules via aliases and not canonical names. The new
aliases were added in commit 241a94abcf ("net/sched: Add module
aliases for cls_,sch_,act_ modules") via a Coccinele script.
sch_fq_pie.c is missing module.h header and thus Coccinele did not patch
it. Add the include and module alias manually, so that autoloading works
for sch_fq_pie too.
(Note: commit message in commit 241a94abcf ("net/sched: Add module
aliases for cls_,sch_,act_ modules") was mangled due to '#'
misinterpretation. The predicate haskernel is:
| @ haskernel @
| @@
|
| #include <linux/module.h>
|
.)
Fixes: 241a94abcf ("net/sched: Add module aliases for cls_,sch_,act_ modules")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20240315160210.8379-1-mkoutny@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since Xilinx-based adapters now support up to eight CAN channels, the
TX interrupt mask array must have eight elements.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/2ab3c0585c3baba272ede0487182a423a420134b.camel@kvaser.com
Fixes: 9b221ba452 ("can: kvaser_pciefd: Add support for Kvaser PCIe 8xCAN")
[mkl: replace Link by Fixes tag]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In case of hitting the file EOF, ceph_read_iter() needs to retrieve the
file size from MDS, and Fr caps aren't neccessary.
[ idryomov: fold into existing retry_op == READ_INLINE branch ]
Reported-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If EOF is encountered, ceph_sync_read() return value is adjusted down
according to i_size, but the "to" iter is advanced by the actual number
of bytes read. Then, when retrying, the remainder of the range may be
skipped incorrectly.
Ensure that the "to" iter is advanced only until EOF.
[ idryomov: changelog ]
Fixes: c3d8e0b5de ("ceph: return the real size read when it hits EOF")
Reported-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Frank Hsiao <frankhsiao@qnap.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
GSP should be handling this and I can see no evidence in opengpu
driver that this register should be touched.
Fixed acceleration on 2080 Ti GPUs.
Fixes: 15740541e8 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314014521.2695233-1-airlied@gmail.com
Since the referenced commit, the xfrm_inner_extract_output() function
uses the protocol field to determine the address family. So not setting
it for IPv4 raw sockets meant that such packets couldn't be tunneled via
IPsec anymore.
IPv6 raw sockets are not affected as they already set the protocol since
9c9c9ad5fa ("ipv6: set skb->protocol on tcp, raw and ip6_append_data
genereated skbs").
Fixes: f4796398f2 ("xfrm: Remove inner/outer modes from output path")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/c5d9a947-eb19-4164-ac99-468ea814ce20@strongswan.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.
Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge additional updates related to the Energy Model, power capping
and system-wide power management for 6.9-rc1:
- Modify the Energy Model code to bail out and complain if the unit of
power is not uW to prevent errors due to unit mismatches (Lukasz
Luba).
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König).
- Fix typo in the suspend and interrupts document (Saravana Kannan).
* pm-em:
PM: EM: Force device drivers to provide power in uW
* pm-powercap:
powercap: intel_rapl: Convert to platform remove callback returning void
* pm-sleep:
Documentation: power: Fix typo in suspend and interrupts doc
The expression htotal * vtotal can have a zero value on
overflow. It is necessary to prevent division by zero like in
fb_var_to_videomode().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Merge an ACPI documentation update for 6.9-rc1 which adds markup to
generate links from footnotes in the enumeration document.
* acpi-docs:
ACPI: docs: enumeration: Make footnotes links
If reading the ACPI _PLD port location object fails, or the port
doesn't have a _PLD ACPI object then the *pld pointer will remain
uninitialized and oops when freed.
The patch that caused this is currently in next, on its way to v6.9.
So no need to add this to stable or current 6.8 kernel.
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/linux-usb/7e92369a-3197-4883-9988-3c93452704f5@gmail.com/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Fixes: f3ac348e6e ("usb: usb-acpi: Set port connect type of not connectable ports correctly")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240308113425.1144689-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For renaming, the directory only needs to be updated once if it
is in the same directory.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When sync or dir_sync is enabled, there is no need to sync the
parent directory's inode if only for updating its timestamp.
1. If an unexpected power failure occurs, the timestamp of the
parent directory is not updated to the storage, which has no
impact on the user.
2. The number of writes will be greatly reduced, which can not
only improve performance, but also prolong device life.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
exfat_count_ext_entries() is no longer called, remove it.
exfat_update_dir_chksum() is no longer called, remove it and
rename exfat_update_dir_chksum_with_entry_set() to it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, each dentry traversed needs to be read
from the storage device or page cache. There are at least 16
dentries in a sector. This will result in frequent page cache
searches.
After this conversion, if all directory entries in a sector are
used, the sector only needs to be read once.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, in exfat_init_ext_entry(), to init
the dentries in a dentry set, the sync times is equals the
dentry number if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
exfat_init_ext_entry() is an init function, it's a bit strange
to free cluster in it. And the argument 'inode' will be removed
from exfat_init_ext_entry(). So this commit changes to free the
cluster in exfat_remove_entries().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Before this conversion, in exfat_remove_entries(), to mark the
dentries in a dentry set as deleted, the sync times is equals
the dentry numbers if 'dirsync' or 'sync' is enabled.
That affects not only performance but also device life.
After this conversion, only needs to be synchronized once if
'dirsync' or 'sync' is enabled.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After this conversion, if "dirsync" or "sync" is enabled, the
number of synchronized dentries in exfat_add_entry() will change
from 2 to 1.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This helper is used to lookup empty dentry set. If there are
no enough empty dentries at the input location, this helper will
return the number of dentries that need to be skipped for the
next lookup.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since exfat_get_dentry_set() invokes the validate functions of
exfat_validate_entry(), it only supports getting a directory
entry set of an existing file, doesn't support getting an empty
entry set.
To remove the limitation, add this helper.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).
Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.
Fixes: 0f4b1c7e89 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eac ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.
While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)
Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.
What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).
Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.
Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.
This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.
Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.
This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).
However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.
Fixes: 0077a504e1 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e39617 ("ahci: asm1064: correct count of reported ports")
Cc: stable@vger.kernel.org
Reported-by: Matt <cryptearth@googlemail.com>
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
I "extracted" YNL C into a GitHub repo to make it easier
to use in other projects: https://github.com/linux-netdev/ynl-c
GitHub actions use Ubuntu by default, and the kernel headers
there are missing f329a0ebea ("genetlink: correct uAPI defines").
Add the direct include workaround for nlctrl.
Fixes: 768e044a5f ("doc/netlink/specs: Add spec for nlctrl netlink family")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240315002108.523232-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason A. Donenfeld says:
====================
wireguard fixes for 6.9-rc1
This series has four WireGuard fixes:
1) Annotate a data race that KCSAN found by using READ_ONCE/WRITE_ONCE,
which has been causing syzkaller noise.
2) Use the generic netdev tstats allocation and stats getters instead of
doing this within the driver.
3) Explicitly check a flag variable instead of an empty list in the
netlink code, to prevent a UaF situation when paging through GET
results during a remove-all SET operation.
4) Set a flag in the RISC-V CI config so the selftests continue to boot.
====================
Link: https://lore.kernel.org/r/20240314224911.6653-1-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.
Cc: stable@vger.kernel.org
Fixes: 496ea826d1 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.
Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.
It can be reproduced by a small script like:
echo "Setting config..."
ip link add dev wg0 type wireguard
wg setconf wg0 /big-config
(
while true; do
echo "Showing config..."
wg showconf wg0 > /dev/null
done
) &
sleep 4
wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")
Resulting in:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
Read of size 8 at addr ffff88811956ec70 by task wg/59
CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
Call Trace:
<TASK>
dump_stack_lvl+0x47/0x70
print_address_description.constprop.0+0x2c/0x380
print_report+0xab/0x250
kasan_report+0xba/0xf0
__lock_acquire+0x182a/0x1b20
lock_acquire+0x191/0x4b0
down_read+0x80/0x440
get_peer+0x140/0xcb0
wg_get_device_dump+0x471/0x1130
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <lillian@star-ark.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core
and convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in this driver and leverage the network core
allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzkaller with KCSAN identified a data-race issue when accessing
keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE()
annotations to mark the data race as intentional.
BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll
write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0:
counter_validate drivers/net/wireguard/receive.c:321 [inline]
wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461
__napi_poll+0x60/0x3b0 net/core/dev.c:6536
napi_poll net/core/dev.c:6605 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6738
__do_softirq+0xc4/0x279 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499
process_one_work kernel/workqueue.c:2633 [inline]
...
read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1:
decrypt_packet drivers/net/wireguard/receive.c:252 [inline]
wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706
worker_thread+0x525/0x730 kernel/workqueue.c:2787
...
Fixes: a9e90d9931 ("wireguard: noise: separate receive counter from send counter")
Reported-by: syzbot+d1de830e4ecdaac83d89@syzkaller.appspotmail.com
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes: 43a71cd66b ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While running in nohz_full mode, a task may enqueue a timer while the
tick is stopped. However the only places where the timer wheel,
alongside the timer migration machinery's decision, may reprogram the
next event accordingly with that new timer's expiry are the idle loop or
any IRQ tail.
However neither the idle task nor an interrupt may run on the CPU if it
resumes busy work in userspace for a long while in full dynticks mode.
To solve this, the timer enqueue path raises a self-IPI that will
re-evaluate the timer wheel on its IRQ tail. This asynchronous solution
avoids potential locking inversion.
This is supposed to happen both for local and global timers but commit:
b2cf7507e1 ("timers: Always queue timers on the local CPU")
broke the global timers case with removing the ->is_idle field handling
for the global base. As a result, global timers enqueue may go unnoticed
in nohz_full.
Fix this with restoring the idle tracking of the global timer's base,
allowing self-IPIs again on enqueue time.
Fixes: b2cf7507e1 ("timers: Always queue timers on the local CPU")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240318230729.15497-3-frederic@kernel.org
When a CPU is an idle migrator, but another CPU wakes up before it,
becomes an active migrator and handles the queue, the initial idle
migrator may end up endlessly reprogramming its clockevent, chasing ghost
timers forever such as in the following scenario:
[GRP0:0]
migrator = 0
active = 0
nextevt = T1
/ \
0 1
active idle (T1)
0) CPU 1 is idle and has a timer queued (T1), CPU 0 is active and is
the active migrator.
[GRP0:0]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1
idle idle (T1)
wakeup = T1
1) CPU 0 is now idle and is therefore the idle migrator. It has
programmed its next timer interrupt to handle T1.
[GRP0:0]
migrator = 1
active = 1
nextevt = KTIME_MAX
/ \
0 1
idle active
wakeup = T1
2) CPU 1 has woken up, it is now active and it has just handled its own
timer T1.
3) CPU 0 gets a timer interrupt to handle T1 but tmigr_handle_remote()
realize it is not the migrator anymore. So it early returns without
observing that T1 has been expired already and therefore without
updating its ->wakeup value.
4) CPU 0 goes into tmigr_cpu_new_timer() which also early returns
because it doesn't queue a timer of its own. So ->wakeup is left
unchanged and the next timer is programmed to fire now.
5) goto 3) forever
This results in timer interrupt storms in idle and also in nohz_full (as
observed in rcutorture's TREE07 scenario).
Fix this with forcing a re-evaluation of tmc->wakeup while trying
remote timer handling when the CPU isn't the migrator anymmore. The
check is inherently racy but in the worst case the CPU just races setting
the KTIME_MAX value that a remote expiry also tries to set.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240318230729.15497-2-frederic@kernel.org
The LoongArch CRC32 hw acceleration is based on arch/mips/crypto/
crc32-mips.c. While the MIPS code supports both MIPS32 and MIPS64,
but LoongArch32 lacks the CRC instruction. As a result, the line
"len -= sizeof(u32)" is unnecessary.
Removing it can make context code style more unified and improve
code readability.
Cc: stable@vger.kernel.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit fb24ea52f7 ("drivers: Remove explicit invocations of
mmiowb()") remove all mmiowb() in drivers, but it says:
"NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation."
The mmio in radeon_ring_commit() is protected by a mutex rather than a
spinlock, but in the mutex fastpath it behaves similar to spinlock. We
can add mmiowb() calls in the radeon driver but the maintainer says he
doesn't like such a workaround, and radeon is not the only example of
mutex protected mmio.
So we should extend the mmiowb tracking system from spinlock to mutex,
and maybe other locking primitives. This is not easy and error prone, so
we solve it in the architectural code, by simply defining the __io_aw()
hook as mmiowb(). And we no longer need to override queued_spin_unlock()
so use the generic definition.
Without this, we get such an error when run 'glxgears' on weak ordering
architectures such as LoongArch:
radeon 0000:04:00.0: ring 0 stalled for more than 10324msec
radeon 0000:04:00.0: ring 3 stalled for more than 10240msec
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3)
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
Link: https://lore.kernel.org/dri-devel/29df7e26-d7a8-4f67-b988-44353c4270ac@amd.com/T/#t
Link: https://lore.kernel.org/linux-arch/20240301130532.3953167-1-chenhuacai@loongson.cn/T/#t
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch doesn't have cache aliases, so flush_dcache_page() is a no-op.
There is a generic implementation for this case in include/asm-generic/
cacheflush.h. So remove the superfluous flush_dcache_page() definition,
which also silences such build warnings:
In file included from crypto/scompress.c:12:
include/crypto/scatterwalk.h: In function 'scatterwalk_pagedone':
include/crypto/scatterwalk.h:76:30: warning: variable 'page' set but not used [-Wunused-but-set-variable]
76 | struct page *page;
| ^~~~
crypto/scompress.c: In function 'scomp_acomp_comp_decomp':
>> crypto/scompress.c:174:38: warning: unused variable 'dst_page' [-Wunused-variable]
174 | struct page *dst_page = sg_page(req->dst);
|
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403091614.NeUw5zcv-lkp@intel.com/
Suggested-by: Barry Song <baohua@kernel.org>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
These two functions are implemented in pgtable.c, and they are needed
only by the virt_to_page() macro in page.h. Having the prototypes in
pgtable.h causes a circular dependency between page.h and pgtable.h,
because the virt_to_page() macro in page.h needs pgtable.h for these
two functions, while pgtable.h needs various definitions from page.h
(e.g. pte_t and pgt_t).
Let's avoid this circular dependency by moving the function prototypes
to page.h.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of
global regs in asms"), global registers will no longer be forced to add
to the def-use chain. Then current_thread_info(), current_stack_pointer
and __my_cpu_offset may be lifted out of the loop because they are no
longer treated as "volatile variables".
This optimization is still correct for the current_thread_info() and
current_stack_pointer usages because they are associated to a thread.
However it is wrong for __my_cpu_offset because it is associated to a
CPU rather than a thread: if the thread migrates to a different CPU in
the loop, __my_cpu_offset should be changed.
Change __my_cpu_offset definition to treat it as a "volatile variable",
in order to avoid such a mis-optimization.
Cc: stable@vger.kernel.org
Reported-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Xing Li <lixing@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
