IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Each time page fault happens, besides capturing its data, also notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As power and thermal envelope events are pure informative and not
indicating an error, we reduce the print level to info only.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some ASICs haven't yet implemented this functionality and so the
ioctl call should fail and the user should be notified of the reason.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is needed to allow adding more data to the lkd_fw_comms_desc
structure.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignored) event happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to binning, Gaudi2 does not always support fp32.
We add support for such an event in case fp32 is used by the user
in such a device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time page fault happens, besides capturing its data, also notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Creating event queue workqueue using alloc_workqueue made it run in
multi threaded mode, which caused parallel dumping of events as well as
parallel events notifying to user, causing logs with multiple
events to be out of order.
Fixed by creating event queue workqueue as single threaded work queue.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignore) happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for Gaudi2 Device with PCI revision 2.
Functionality is exactly the same as revision 1, the only difference
is device name exposed to user.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As Gaudi2 has a single PCI id, the secured asic type is redundant.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to know if driver catches PCI errors correctly, we need to
print a warning per each error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_access_sram_dram_region() uses a region base which is set within the
hl_set_dram_bar() function. However, for SRAM access this function is
not called, and we end up with a wrong value of region base and with a
bad calculated address.
Fix it by initializing the region base value independently of whether
hl_set_dram_bar() is called or not.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To avoid memory corruption in kernel memory while using timestamp
registration nodes, zero the kernel buff memory when its allocated.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Consecutive error protects a device reset loop from being triggered
due to h/w issues and enters the device into an unavailable state.
When user may cause the error, an unavailable state
will prevent the user from running its workloads.
The commit prevents entering consecutive state when a user context
is enabled.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use graceful hard reset when detecting a CS timeout that requires a
device reset.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use graceful hard reset for F/W events on Gaudi2 device that require a
device reset.
While at it, do a small refactor of the checks and function calls,
to simplify it and to avoid code duplication.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use graceful hard reset for F/W events on Gaudi device that require a
device reset.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add an option to control the timeout value for the driver's watchdog
of the reset process. The timeout represents the amount of the user
has to close his process once he gets a device reset notification from
the driver.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Calling hl_device_reset() for a hard reset will lead to a quite
immediate device reset and to killing user process.
For resets that follow errors, it disables the option to debug the
errors on both the device side and the user application side.
This patch adds a 'graceful hard reset' option and a new
hl_device_cond_reset() function.
Under some conditions, mainly if there is no user process or if he is
not registered to driver notifications, this function will execute hard
reset as usual.
Otherwise, the reset will be postponed and a notification will be sent
to user, to let him perform post-error actions and then to release the
device, after which reset will take place.
If device is not released by user in some defined time, a watchdog work
will execute the reset in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently there is no verification whether the divisor is legal.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As there are 2 types of user mappings, pmmu and hmmu, calculate
only the relevant mappings for the requested type.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The virtual MSI-X doorbell is supported now in F/W, so all
configurations to access the PCIE_DBI MSI-X doorbell can be removed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Up until now the use-case in the driver was that the HBM is accessed
using the HBM BAR, yet the BAR sometimes cannot cover the whole HBM and
so we needed to set the BAR to other HBM offset.
Now we are facing the need to access other PCI memory regions that can
be covered by the HBM BAR.
To answer that we are allowing the caller to determine if the HBM BAR
need to be set or not regardless of the PCI memory region.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The code uses the pointer for trace purpose (without actually
dereference it) but still get static analysis warning.
This patch eliminate the warning.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
NIC ARCs need to have access to CBU_EARLY_BRESP, hence we unsecure
those registers.
Signed-off-by: Dilip Puri <dilipp@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The event notifier mechanism should not raise an empty
event (event equals zero).
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Added function to calculate possible engines which caused
RAZWI (read-only zero, write ignored), from a given router id or
module index.
When getting RAZWI via PSOC IP, first the router id is calculated
and then the possible engines that caused the RAZWI are calculated.
There is a possibility that the RAZWI initiator is not an engine. In
that case, it will not be included in possible engines as it
doesn't have an engine id.
RAZWI information is captured when receiving event from engine or via
PSOC IP.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
'struct hl_device_reset_work' is used as a wrapper for the reset work
and its parameters, including the reset workqueue on which it runs.
In a future commit, another reset related work with similar parameters
is going to be added, but it won't use the reset workqueue.
As in any case there is a single reset workqueue, and to allow the resue
of this structure, move the reset workqueue to 'struct hl_device'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Unregistering eventfd is for releasing host resources and doesn't
involve an access to the device. As such, there is no reason to disallow
it when device isn't operational.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If reset upon device release is enabled, there is no need to check the
device idle status in hpriv_release(), because device is going to be
reset in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Device unavailable notifies the user that there isn't an option to
retrieve debug information from the device.
When a critical device error occurs and the f/w performs the device
reset, a device unavailable notification shall be sent to the user
process.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Privileged MME clock configuration is removed as it is done by the f/w.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
pf was an abbreviation for prefetch but because pf already stands
for 'physical function', we decided to change it to 'prefetch'.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Only the first page fault will be saved.
Besides the address which caused the page fault, the driver captures
all of the mmu user mappings.
User can retrieve this data via the new uapi (new opcode in INFO ioctl).
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
RAZWI is optionally handled as part of the generic QM SEI error
handling, but it always uses PDMA as the module ID.
Fix it to use the suitable module ID according to the specific event.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This event notification was compatible only with gaudi, where razwi
and page fault happens together.
To make it compatible with all ASICs, this refactor contains:
1. Razwi notification will only notify about razwi info.
New notification will be added in future patch, to retrieve data
about page fault error.
2. Changed razwi info structure to support all ASICs.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Monitoring apps would like to query device state at any time so we
should allow it also during reset because it doesn't involve
accessing the h/w.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If hl_cpu_accessible_dma_pool_alloc() fails, we should check
'req_cpu_addr', fix it.
Fixes: 0c88760f8f5e ("habanalabs/gaudi2: add secured attestation info uapi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When doing sizeof() and giving as argument a dereference of
a pointer-to-a-pointer object, clang will issue a warning.
Eliminate the warning by passing struct <name>*
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
I$ prefetch is enabled when sending a TPC kernel to initialize the TPC
memory, and it has a restriction that the base address will be aligned
to 8KB.
Currently the base address is 128 bytes from the start address of the
device SRAM, so prefetching will start 128 bytes before the actual
kernel memory.
Modify the kernel address to be 8KB aligned.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
To be forward-backward compatible with the firmware in the initial
communication during preboot, we need to remove the validation of the
header size. This will allow us to add more fields to the
lkd_fw_comms_desc structure.
Instead of the validation of the header size, we just print warning
when some mismatch in descriptor has been revealed, and we calculate
the CRC base on descriptor size reported by the firmware instead of
calculating it ourselves.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Newer ASICs code changes more often, has more chance to fail
compilation. So, let's compile them first so errors in those files
will fail compilation sooner.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order for the user to flush PCIE he needs to read some register
from PCIE block. The chosen register is SPECIAL_GLBL_SPARE_0 and
hence needs to be unsecured.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If the user wants to open the device, and the device is currently in
reset, the user will get an error from the open().
We don't need to display an error in the dmesg for that as it is
not a real error and we can spam the kernel log with this message.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
