IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Merge series from xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>:
To use RT5682S as the codec and MAX98390 as the amp, add a new
sound card named mt8188_rt5682s.
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "mediatek,mt8188-rt5682s" to support new board
with rt5682s codec.
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231010023738.8241-2-xiazhengqiao@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
imx8mp.dtsi passes #sound-dai-cells = <0> in the micfil node.
Document #sound-dai-cells to fix the following schema warning:
audio-controller@30ca0000: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20231004122935.2250889-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Luca Weiss <luca.weiss@fairphone.com>:
The AW88261 chip doesn't have a reset gpio, so remove it from the
bindings and from the driver.
The TAS5754/6 power amplifiers use the same pcm512x driver with
only minor restictions described in the bindings document.
Signed-off-by: Joerg Schambacher <joerg.hifiberry@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929150555.405388-1-joerg.hifiberry@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AW88261 chip doesn't have a reset GPIO, so disallow providing
reset-gpios.
At the same time also don't keep reset-gpios required for AW88395. This
is both because the Linux driver has it optional, and it also simplifies
the bindings by not introducing another conditional.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-1-837cb1e7b95c@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's generally no need to use definitions to reference from
individual properties. All the property names are the same, and all the
defined properties are used by all the users.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230928194126.1146622-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
The awinic aw87390 is a new high efficiency, low noise,
constant large volume, 6th Smart K audio amplifier.
Add a DT schema for describing awinic aw87390 audio amplifiers.
They are controlled using I2C.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928105727.47273-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two properties, the "awinic,audio-channel" property and the
"awinic,sync-flag". The "awinic,audio-channel" is used to make
different PA load different configurations, the "awinic,sync-flag"
is used to synchronize the phases of multiple PA. These two properties
will be read by the corresponding driver, allowing multi-PA to
achieve better playback effect.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230928105727.47273-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties or additionalProperties as appropriate.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230925220947.2031536-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the tfa9879 audio CODEC bindings to DT schema
No error/warning seen when running make dt_binding_check
Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230921183313.54112-1-bragathemanick0908@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bias sense is being enabled by default in the driver, and the
default detect time is being dropped slightly. Update the binding
document to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230919103116.580305-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8782 can safely support rates higher than 48kHz by changing the
value of the FSAMPEN pin.
Allow specifying the FSAMPEN pin value in the device tree.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918131532.2257615-4-contact@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the PWM-DAC controller on the JH7110
RISC-V SoC by StarFive Ltd.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230814080618.10036-2-hal.feng@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SM6115 has a TX Macro, requiring an NPL clock, but not DCODEC.
Document it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230825-topic-6115tx-v1-1-ebed201ad54b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
* The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
* Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
* Support for the V extension in ptrace(), again.
* Support for KASLR.
* Support for the BPF prog pack allocator in RISC-V.
* A handful of bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=s89m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround
-----BEGIN PGP SIGNATURE-----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=txoJ
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
-----BEGIN PGP SIGNATURE-----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=n+1p
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
This contains various cleanups and fixes across the board.
-----BEGIN PGP SIGNATURE-----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=kax5
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
Subsystem:
- Add a way for drivers to tell the core the supported alarm range is smaller
than the date range. This is not used yet but will be useful for the
alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support
-----BEGIN PGP SIGNATURE-----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=4kkJ
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device
-----BEGIN PGP SIGNATURE-----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=av5t
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device"
* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix probe failure when no i3c device exist
i3c: master: Fix SETDASA process
dt-bindings: i3c: Fix description for assigned-address
i3c: master: svc: Describe member 'saved_regs'
i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
i3c: Explicitly include correct DT includes
- a new driver for Azoteq IQS7210A/7211A/E touch controllers
- support for Azoteq IQS7222D variant added to iqs7222 driver
- support for touch keys functionality added to Melfas MMS114 driver
- new hardware IDs added to exc3000 and Goodix drivers
- xpad driver gained support for GameSir T4 Kaleid Controller
- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly
- a fix for psmouse driver to more reliably switch to RMI4 mode
on devices that use native RMI4/SMbus protocol
- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops
- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(),
and others.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZPeTEAAKCRBAj56VGEWX
nKzYAPwJ7ctpjx11opQrxAz83mW2NSuEI+v3vodpRfqO3DewvQD/QnspSzUuTSWv
hWSQ1uagKZm4FqeJPDowVrU1E9Lq9Aw=
=z9DZ
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Azoteq IQS7210A/7211A/E touch controllers
- support for Azoteq IQS7222D variant added to iqs7222 driver
- support for touch keys functionality added to Melfas MMS114 driver
- new hardware IDs added to exc3000 and Goodix drivers
- xpad driver gained support for GameSir T4 Kaleid Controller
- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly
- a fix for psmouse driver to more reliably switch to RMI4 mode on
devices that use native RMI4/SMbus protocol
- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops
- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
others.
* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
Input: goodix - add support for ACPI ID GDX9110
Input: rpckbd - fix the return value handle for platform_get_irq()
Input: tca6416-keypad - switch to using input core's polling features
Input: tca6416-keypad - convert to use devm_* api
Input: tca6416-keypad - fix interrupt enable disbalance
Input: tca6416-keypad - rely on I2C core to set up suspend/resume
Input: tca6416-keypad - always expect proper IRQ number in i2c client
Input: lm8323 - convert to use devm_* api
Input: lm8323 - rely on device core to create kp_disable attribute
Input: qt2160 - convert to use devm_* api
Input: qt2160 - do not hard code interrupt trigger
Input: qt2160 - switch to using threaded interrupt handler
Input: qt2160 - tweak check for i2c adapter functionality
Input: psmouse - add delay when deactivating for SMBus mode
Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
Input: qt1070 - convert to use devm_* api
Input: mcs-touchkey - convert to use devm_* api
Input: amikbd - convert to use devm_* api
Input: lm8333 - convert to use devm_* api
Input: mms114 - add support for touch keys
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmT3b+IACgkQ+iyteGJfRsr0hwCgkfCpOknevjztFcumniR1pREF
/z0AoIrUiPIkeDuyHwZYmILzS0jqHmU5
=OQC4
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add marvell GTI watchdog driver
- add support for Amlogic-T7 SoCs
- document the IPQ5018 watchdog compatible
- enable COMPILE_TEST for more watchdog device drivers
- core: stop watchdog when executing poweroff command
- other small improvements and fixes
* tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits)
watchdog: Add support for Amlogic-T7 SoCs
watchdog: Add a new struct for Amlogic-GXBB driver
dt-bindings: watchdog: Add support for Amlogic-T7 SoCs
dt-bindings: watchdog: qcom-wdt: document IPQ5018
watchdog: imx2_wdt: Improve dev_crit() message
watchdog: stm32: Drop unnecessary of_match_ptr()
watchdog: sama5d4: readout initial state
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
watchdog: core: stop watchdog when executing poweroff command
watchdog: pm8916_wdt: Remove redundant of_match_ptr()
watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()
watchdog: starfive: Remove #ifdef guards for PM related functions
watchdog: s3c2410: Fix potential deadlock on &wdt->lock
watchdog:rit_wdt: Add support for WDIOF_CARDRESET
dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET
watchdog: Enable COMPILE_TEST for more drivers
watchdog: advantech_ec_wdt: fix Kconfig dependencies
watchdog: Explicitly include correct DT includes
Watchdog: Add marvell GTI watchdog driver
dt-bindings: watchdog: marvell GTI system watchdog driver
...
The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
there is no need to keep the text bindings version.
Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230902134407.2589099-1-festevam@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the OmniVision OV7251 Image Sensor binding to DT schema format.
vddd-supply was listed as required, but the example and actual user
don't have it. Also, the data brief says it has an internal regulator,
so perhaps it is truly optional.
Add missing common "link-frequencies" which is used and required by the
Linux driver.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230817202713.2180195-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The OV5695 binding is almost the same as the OV5693 binding. The only
difference is 'clock-names' is defined for OV5695. However, the lack of
clock-names is an omission as the Linux OV5693 driver expects the same
'xvclk' clock name.
'link-frequencies' is required by OV5693, but not OV5695, so make that
conditional. Really, this shouldn't vary by device, but we're stuck with
the existing binding use.
The rockchip-isp1 binding example is missing required properties, so it
has to be updated as well.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230817202647.2179609-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen).
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu).
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao).
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos).
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado).
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski).
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao).
- Free calibration nvmem after reading it on sun8i (Mark Brown).
- Remove useless comment from the sun8i driver (Yangtao Li).
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom
tsens (Min-Hua Chen).
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum).
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du).
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado).
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=I19o
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
Support for booting the iMX remoteprocs using MMIO, instead of SMCCC is
added. The iMX driver is also extended to support delivering interrupts
from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating a
full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances supported
is cleaned up, and SDM845 is added. SDM630/636/660 support for the modem
subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h.
-----BEGIN PGP SIGNATURE-----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=BV3w
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
- New Drivers
- Add support for NXP PCA995x I2C Constant Current LED Driver
- New Device Support
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
- Fix-ups
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not required
- Omit the use of redundant casts and if relevant replace with better ones
- Use purpose-built APIs for various actions; sysfs_emit(), module_led_trigger()
- Remove a bunch of superfluous locking
- Bug Fixes
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check
-----BEGIN PGP SIGNATURE-----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=wNmv
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
New Drivers:
- Add support for NXP PCA995x I2C Constant Current LED Driver
New Device Support:
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
Fix-ups:
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not
required
- Omit the use of redundant casts and if relevant replace with better
ones
- Use purpose-built APIs for various actions; sysfs_emit(),
module_led_trigger()
- Remove a bunch of superfluous locking
Bug Fixes:
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check"
* tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits)
leds: aw2013: Enable pull-up supply for interrupt and I2C
dt-bindings: leds: Document pull-up supply for interrupt and I2C
dt-bindings: leds: aw2013: Document interrupt
leds: uleds: Use module_misc_device macro to simplify the code
leds: trigger: netdev: Use module_led_trigger macro to simplify the code
dt-bindings: leds: Fix reference to definition of default-state
leds: turris-omnia: Drop unnecessary mutex locking
leds: turris-omnia: Use sysfs_emit() instead of sprintf()
leds: Make leds_class a static const structure
leds: Remove redundant of_match_ptr()
dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
dt-bindings: leds: rohm,bd71828: Drop select:false
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
leds: multicolor: Use rounded division when calculating color components
leds: rgb: Add a multicolor LED driver to group monochromatic LEDs
dt-bindings: leds: Add binding for a multicolor group of LEDs
leds: class: Store the color index in struct led_classdev
leds: Provide devm_of_led_get_optional()
leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
...
- Add support for the Cirrus Logic CS42L43 Audio CODEC
- Fix-ups
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree cache
- Ensure correct includes are present and remove some that are not required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}()
- Bug Fixes
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting
-----BEGIN PGP SIGNATURE-----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=MNYe
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
a lot of developers were on holidays (including myself) it was a good
timing to apply lots of cleanups which would normally cause merge
conflicts with other floating patches. Extra thanks go to Andi Shyti who
backed me up when I was on a four week hiatus. This is also the reason
that some patches were commited later than ideal.
-----BEGIN PGP SIGNATURE-----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=gpYJ
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has mainly cleanups this time and a few driver improvements.
Because a lot of developers were on holidays (including myself) it was
a good timing to apply lots of cleanups which would normally cause
merge conflicts with other floating patches. Extra thanks go to Andi
Shyti who backed me up when I was on a four week hiatus. This is also
the reason that some patches were commited later than ideal"
* tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (67 commits)
i2c: at91: Use dev_err_probe() instead of dev_err()
I2C: ali15x3: Do PCI error checks on own line
i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
i2c: designware: Add support for recovery when GPIO need pinctrl
i2c: mlxcpld: Add support for extended transaction length
i2c: mlxcpld: Allow driver to run on ARM64 architecture
i2c: nforce2: Do PCI error check on own line
i2c: sis5595: Do PCI error checks on own line
i2c: qcom-cci: Fix error checking in cci_probe()
i2c: muxes: pca954x: Add regulator support
i2c: muxes: pca954x: Add MAX735x/MAX736x support
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
dt-bindings: i2c: pca954x: Correct interrupt support
i2c: pnx: Use devm_platform_get_and_ioremap_resource()
i2c: pxa: Use devm_platform_get_and_ioremap_resource()
i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
i2c: st: Use devm_platform_get_and_ioremap_resource()
i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
...
- Remove the OXNAS driver instead of adding a new one!
- A set of boring fixes, cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=dGVZ
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-09-04-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/clockevent driver updates from Thomas Gleixner:
- Remove the OXNAS driver instead of adding a new one!
- A set of boring fixes, cleanups and improvements
* tag 'timers-core-2023-09-04-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Explicitly include correct DT includes
clocksource/drivers/sun5i: Convert to platform device driver
clocksource/drivers/sun5i: Remove pointless struct
clocksource/drivers/sun5i: Remove duplication of code and data
clocksource/drivers/loongson1: Set variable ls1x_timer_lock storage-class-specifier to static
clocksource/drivers/arm_arch_timer: Disable timer before programming CVAL
dt-bindings: timer: oxsemi,rps-timer: remove obsolete bindings
clocksource/drivers/timer-oxnas-rps: Remove obsolete timer driver
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding
-----BEGIN PGP SIGNATURE-----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=LPWk
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
* Use refcount to prevent corruption
* Call external _get and _put in right order
* Fix use-after-free in mtd release
* Explicitly include correct DT includes
* Clean refcounting with MTD_PARTITIONED_MASTER
* mtdblock: make warning messages ratelimited
* dt-bindings: Add SEAMA partition bindings
MTD device driver changes:
* spear_smi: Use helper function devm_clk_get_enabled()
* maps: fix -Wvoid-pointer-to-enum-cast warning
* docg3: Remove unnecessary (void*) conversions
* physmap-core, spear_smi, st_spi_fsm, lpddr2_nvm, lantiq-flash, plat-ram:
- Use devm_platform_get_and_ioremap_resource()
Raw NAND core changes:
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license
Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
sh_ftlctl, MXC, Sunxi:
- Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
FSMC, Arasan:
- Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
- Use devm_platform_ioremap_resource_byname()
- Propagate init error -EPROBE_DEFER up
- Propagate error and simplify ternary operators
- Fix mtd oobsize
- Fix potential out-of-bounds access in oob write
- Fix crash during the panic_write
- Fix potential false time out warning
- Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
- Support for 512B ECC step size
- Fix build error
- Use NAND core API to check status
- dt-bindings:
* Make ECC properties dependent
* Support for 512B ECC step size
* Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
- Conversion to ->exec_op()
- Removal of the legacy interface
- Two full series of improvements/misc fixes
* Use the BIT() macro
* Use u8 instead of uint8_t
* Fix alignment with open parenthesis
* Fix the spacing
* Fix wrong indentation
* Fix a typo
* Early structure initialization
* Fix address parsing within ->exec_op()
* Remove superfluous initialization of "ret"
* Rename variables in qcom_op_cmd_mapping()
* Handle unsupported opcode in qcom_op_cmd_mapping()
* Fix the opcode check in qcom_check_op()
* Use EOPNOTSUPP instead of ENOTSUPP
* Wrap qcom_nand_exec_op() to 80 columns
* Unmap sg_list and free desc within submic_descs()
* Simplify the call to nand_prog_page_end_op()
* Do not override the error no of submit_descs()
* Sort includes alphabetically
* Clear buf_count and buf_start in raw read
* Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()
SPI NAND manufacturer driver changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6
SPI NOR core changes:
* fix assumption on enabling quad mode in
spi_nor_write_16bit_sr_and_check()
* avoid setting SRWD bit in SR if WP# signal not connected as it will
configure the SR permanently as read only. Add "no-wp" dt property.
* clarify the need for spi-nor compatibles in dt-bindings
SPI NOR manufacturer driver changes:
* Spansion:
- Add support for S28HS02GT
- Switch methods to use vreg_offset from SFDP instead of hardcoding
the register value
* Microchip/SST:
- Add support for sst26vf032b flash
* Winbond:
- Correct flags for Winbond w25q128
* NXP spifi:
- Use helper function devm_clk_get_enabled()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmTstY0ACgkQJWrqGEe9
VoRpeggAmiUPLVEJRosvtOAaT+en2YTDiVZrRmQ8hjekjRc4FfY6C7DPNWNua3zx
SaVqLEF7ScjnKH1YYwXN3XG3j4+1NPRV/VmR89yD6NVOcLs8BEJk/Ooc6LQrHAAf
E87jVafbPLWq8MkcVcnHbdijgHVh2onMbUQtkqjFSn6WAolSmZFJotocfKT12uuY
K9Hn5TLjRiH5e7O1rQnBcATMXjHIA1o0G1RCklm+T1MojNXIO1KN8yMYRjUoGbEJ
afFdwczNiTFgL4MJ3qL6NhqhSGC6V6QsUcsYvEjmComepAuZBP2wGnuQMHOxKqYV
Tl93LW8FOdyWHdCSgJdYkctoRPU6KQ==
=uMXQ
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- Use refcount to prevent corruption
- Call external _get and _put in right order
- Fix use-after-free in mtd release
- Explicitly include correct DT includes
- Clean refcounting with MTD_PARTITIONED_MASTER
- mtdblock: make warning messages ratelimited
- dt-bindings: Add SEAMA partition bindings
Device driver changes:
- Use devm helper functions
- Fix questionable cast, remove pointless ones.
- error handling fixes
- add support for new chip versions
- update DT bindings
- misc cleanups - fix typos, whitespace, indentation"
* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
mtd: spear_smi: Use helper function devm_clk_get_enabled()
mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
mtd: rawnand: qcom: Add read/read_start ops in exec_op path
mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
mtd: rawnand: qcom: Sort includes alphabetically
mtd: rawnand: qcom: Do not override the error no of submit_descs()
...
-----BEGIN PGP SIGNATURE-----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=24SV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- devm fixes for problems that caused use-after-free reports (Rahul
Rameshbabu)
- Some extensive HID docs (Marco Morandini)
- Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)
- Google Stadia Force Feedback support (Fabio Baltieri)
- Various fixes and new device ID support
* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
HID: logitech-hidpp: rework one more time the retries attempts
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
HID: multitouch: Correct devm device reference for hidinput input_dev name
HID: uclogic: Correct devm device reference for hidinput input_dev name
HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
HID: i2c-hid: elan: Add ili9882t timing
dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
HID: apple: Add "Hailuck" to the list of non-apple keyboards
HID: steelseries: arctis_1_battery_request[] should be static
MAINTAINERS: update my email address
HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
HID: wacom: struct name cleanup
HID: wacom: remove unnecessary 'connected' variable from EKR
HID: wacom: remove the battery when the EKR is off
HID: nvidia-shield: Update Thunderstrike LED instance name to use id
HID: nvidia-shield: Add battery support for Thunderstrike
HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
HID: hid-google-stadiaff: add support for Stadia force feedback
HID: logitech-dj: Add support for a new lightspeed receiver iteration
HID: logitech-hidpp: Add support for the Pro X Superlight
...
-----BEGIN PGP SIGNATURE-----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=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Mark Brown
Charles Keepax
xiazhengqiao
Fabio Estevam
Bragatheswaran Manickavel
Joerg Schambacher
Luca Weiss
Rob Herring
Weidong Wang
ChiYuan Huang
Alex Bee
John Watts
Hal Feng
Konrad Dybcio
Linus Torvalds
Palmer Dabbelt
Raphael Gallais-Pou